171a93ca30
also small negative values cause problems
...
Logic differs from the original formulation now
2019-09-22 14:17:17 -07:00
6b5b0fae22
mixed up real and aimag part in quaternion
...
+ some tests
2019-09-22 12:10:39 -07:00
25c9bb1cd7
testing some corner cases
2019-09-22 11:29:34 -07:00
62174a8978
testing all conversions
...
using norm(Delta q) ensures that the quality of the conversion is
tested, not the numerical properties of any orientation representation.
2019-09-22 11:15:27 -07:00
6e5b9ca665
unused variables
2019-09-22 08:54:59 -07:00
77011a5dba
this fix restores the previous behavior of dislotwin
...
very strange behavior in plasticity_detect changes for dislotwin. This
fix restores the old behavior with respect to number of iterations.
Using orientation%fromMatrix() results in much more iterations and an
increase in runtime for the test from approx 6 min to 40 min. Results
still match in the end. Also, crystallite_Fp0 differs by approx 1e-15
only between the two methods.
I assume that something is wrong with either dislotwin or the
state/stress integration
2019-09-22 07:46:30 -07:00
de632ec85c
better names
2019-09-22 07:22:24 -07:00
372536d57e
unit test for rotation class
2019-09-22 06:53:03 -07:00
5fa1ecb170
determinant calculations give slightly different results
2019-09-22 06:41:55 -07:00
30afaf2a95
bugfic: Blocksize parameter was too small
2019-09-21 23:45:54 -07:00
51bd67fa29
findloc is in gfortran 9.1
2019-09-21 23:03:53 -07:00
25d91c79af
larger block size seems favorable
2019-09-21 23:03:27 -07:00
8b908fb350
some more testing
2019-09-21 21:25:55 -07:00
a963f1d2c3
better explicit
2019-09-21 09:16:58 -07:00
f5caee8026
issue now clearer
2019-09-21 08:23:56 -07:00
7ef4aca170
vectorized
...
there seems to be a conflict in the definition of the projection for
edge and screw.
Nonlocal uses the transpose compared to dislotwin/disloUCLA.
2019-09-21 08:21:39 -07:00
8013dec45f
safer
2019-09-21 07:14:45 -07:00
7837a6dc01
not used ...
...
... and equivalentStress33 seemed wrong
... and equivalentStrain33 was confusing
2019-09-20 18:45:54 -07:00
a17046cfdf
full merger
2019-09-20 18:44:23 -07:00
a16af9a7ad
single source of truth
2019-09-20 18:33:12 -07:00
97127f9034
following standard: Output first
2019-09-20 18:28:46 -07:00
53283d5c01
using newer interface
2019-09-20 18:20:33 -07:00
09c1150e3c
more error checking
2019-09-20 18:16:08 -07:00
c1d1c83088
better check input data
2019-09-20 17:49:55 -07:00
a8b72c3f53
even better to read
2019-09-20 17:42:55 -07:00
7fe3e3b406
easier to read
2019-09-20 17:38:57 -07:00
44125f3f09
convenience function for symmetric 4th order tensors
...
unfortunately, array size does not qualify to distinguish generics
2019-09-20 17:36:37 -07:00
ad83c8541d
same names as in python
2019-09-20 17:18:09 -07:00
7e6265b128
make use of consistency checks
2019-09-20 16:52:55 -07:00
ef4204da14
Merge branch 'MiscImprovements' of magit1.mpie.de:/damask/DAMASK into MiscImprovements
2019-09-20 16:48:50 -07:00
6c0e92d5c1
functionality to rotate 4-tensor
2019-09-20 16:47:44 -07:00
4dfb1f6450
next try for MARC 2019
2019-09-21 01:07:04 +02:00
93c8aa8f75
bugfix: used uninitialized vector
2019-09-21 00:08:14 +02:00
7ff106a1fc
better readable
2019-09-20 08:45:23 -07:00
d69d57221d
consistent type handling and stronger encapsulation
...
components of quaternion are private now
qu is an array, not a quaterion (as in the python module). conceptually
cleaner because eu,ax,om, etc. are also plain array
2019-09-20 08:36:16 -07:00
0b6620bfb7
Merge branch 'development' into MiscImprovements
...
F***ing commits to development!
2019-09-20 07:40:52 -07:00
42fba28fa1
getting rid of conversions with unclear behavior
2019-09-20 07:37:58 -07:00
76eaa9855f
correct type (pReal)
2019-09-20 06:57:39 -07:00
47fe5b9c15
Merge branch 'MiscImprovements' of magit1.mpie.de:/damask/DAMASK into MiscImprovements
2019-09-20 06:54:23 -07:00
052ee10fcb
sanity checks as in python class
2019-09-20 06:53:49 -07:00
e8ed25d361
messages were not used anymore
2019-09-20 06:40:21 -07:00
23dba41a09
absolutely not needed
...
the solvers report when they are initialized
2019-09-20 05:41:12 -07:00
c75609f8f0
Marc 2019 does not work with HDF5
...
Seems that Marc 2019 brings its own HDF5. Basically good news, but
should be resolved in a separate branch
2019-09-20 14:23:06 +02:00
31f39fac82
[skip ci] fixed confusion about n in Li tangent: prm%n was meant but forall index n was used!
2019-09-20 08:05:15 -04:00
27732b1c0d
better use rotation class functionality
2019-09-19 23:32:19 -07:00
a70779965c
some helper functions for further transition
2019-09-19 22:50:30 -07:00
01561a2bae
polishing
2019-09-19 22:07:02 -07:00
d11f401c67
removed unused variables and correct type casting
...
I don't believe that n is correct here ...
2019-09-19 19:53:00 -07:00
792dda866d
rotation class has consistent set of conversions
...
crytallite_oriention0 was essentially a copy of material_EulerAngles
2019-09-19 19:42:28 -07:00
a94c104c75
using texture class
2019-09-19 19:14:37 -07:00
5d0a67e5dc
texture class replaces manual conversions
2019-09-19 18:25:51 -07:00
e48059d6f1
correct name
2019-09-19 16:56:43 -07:00
08d2cdcb25
forall is deprecated in Fortran 2018
2019-09-19 14:24:13 -07:00
b41d6182a5
safe use of optional argument
2019-09-19 14:20:02 -07:00
f6c616c84b
consistent orientation/quaternion handling is in own submodule
2019-09-19 13:59:18 -07:00
7fa979f800
removed unused function
...
were based on/used for deprecated orientation handling
2019-09-19 13:51:37 -07:00
be0d961954
cleaning
2019-09-19 13:40:03 -07:00
e82fdbcdfa
use more appropriate name
2019-09-19 13:39:22 -07:00
ddff2cb6e7
newer versions of PGI provide norm2
...
https://www.pgroup.com/resources/docs/19.7/x86/pgi-release-notes/index.htm#what-is-new-197
2019-09-19 13:38:45 -07:00
f1d29da056
does not work anymore
...
dump functions were removed from IO, migrate to HDF5 if needed
2019-09-19 13:07:18 -07:00
5ab8f55f21
[skip ci] fixed indentation
2019-09-19 12:58:51 -07:00
d0579bb674
data layout and names as discussed with Karo and Philip
2019-09-19 12:48:04 -07:00
5f1934bacb
adopting indentation
2019-09-19 11:40:59 -07:00
34e0dd1c64
polishing
2019-09-19 11:00:41 -07:00
2aaa5ff8e7
Merge branch 'Dislotwin-climb2' into 'development'
...
Dislotwin climb2
See merge request damask/DAMASK!94
2019-09-19 11:19:05 +02:00
d6e93367eb
[skip ci] clarified comment
2019-09-19 11:17:23 +02:00
b06c5bd686
Merge branch 'even-more-HDF5-postprocessing' into development
2019-09-18 21:14:19 -04:00
036794e7d3
support for Marc2019
2019-09-17 15:53:49 +02:00
462bb07efd
Merge branch 'development' into even-more-HDF5-postprocessing
2019-09-11 16:29:44 -07:00
15e796d599
Merge branch 'development' into Dislotwin-climb2
2019-09-11 12:06:29 -07:00
ca760f9ca1
added text lines
2019-09-06 15:47:02 -04:00
cf37f8d405
added some lines to help while debugging
2019-09-06 15:45:49 -04:00
836172028d
modified plastic_isotropic_LiAndItsTangent to behave correctly
2019-09-06 15:44:38 -04:00
fbf82fbca8
Referencing
2019-09-05 09:42:45 +02:00
7ce098c75c
small polishing
2019-09-04 14:52:44 -07:00
2fc66cff5b
better readable
2019-09-04 14:30:26 -07:00
dba49fe387
parameter was not read
...
thanks to Vitesh for reporting
2019-09-04 07:18:41 -07:00
be5e68249f
Conflicts resolved
2019-08-20 14:29:11 +02:00
b854e7ee08
Decision based on possibility of partials
2019-08-20 13:54:51 +02:00
c71b060c48
Improved syntax for binary switches
2019-08-20 10:56:36 +02:00
d2affaa414
clearer logic
2019-08-16 14:10:12 -07:00
38755cb30d
polishing
2019-08-16 13:56:52 -07:00
50b372d9f1
ClimbSwitch introduced
2019-08-16 15:57:11 +02:00
5dfd13b759
documenting new variables
2019-08-16 15:07:19 +02:00
5a72f513c7
SFE not equal to zero
2019-08-15 13:56:59 +02:00
310d262e9f
nearest neighbour number is 12 for fcc
2019-08-15 13:55:12 +02:00
860ef2f256
Corrected the calculation of sigma_cl
2019-08-01 15:29:32 +02:00
d40e4a3800
SFE at 0K can be negative as well
2019-07-30 10:53:19 +02:00
f786fcd5f1
Better name for climb stress
2019-07-27 11:07:36 +02:00
7ccc097406
for testing output of materialpoint results
2019-07-15 17:08:18 -07:00
fa6e88970c
avoid empty entries
2019-07-15 13:53:34 -07:00
eeb5f45e88
adopted from Viteshs branch
2019-07-05 22:55:08 -07:00
4340c558d7
named as in DAMASK paper
2019-07-05 22:26:51 -07:00
5ff4664b6d
polishing
2019-06-30 22:09:51 -07:00
619c67cc19
fixed array access
2019-06-30 01:29:36 +02:00
7ad343c9b6
polishing
2019-06-29 15:06:47 -07:00
a04be84719
avoid uninitialized array
2019-06-29 10:26:29 -07:00
bf8ac403f1
polishing, Part II
2019-06-29 10:15:17 -07:00
c6c1d2ab8d
polishing
2019-06-29 10:01:18 -07:00
4b10522bee
catch user inputs that result in division by zero
2019-06-28 17:52:38 -07:00
a88baf93b2
avoid division (mod) by zero
2019-06-28 17:09:27 -07:00
1d2a7d0917
fixed copy and paste errors
2019-06-28 16:51:03 -07:00
b7ac91480a
safe for DEBUG=ON and N_tr=N_tw=0
2019-06-28 16:35:31 -07:00
02744406e8
was not used
2019-06-16 02:11:09 +02:00
860a6d5d49
copy and paste error
2019-06-15 22:37:31 +02:00
43a17a17a2
clearer logic, no outdated comments
2019-06-15 20:49:48 +02:00
e30478127d
cleaned
2019-06-15 20:42:16 +02:00
2c4f1eb173
adjusting indentation
2019-06-15 20:37:53 +02:00
6370dd1a43
white space adjustments
2019-06-15 18:27:38 +02:00
f54a6cdc3b
white space adjustments
2019-06-15 16:42:16 +02:00
4256f67919
polishing
2019-06-15 16:21:37 +02:00
25d02c2f19
most of the functionality is only relevant for commercial FEM
2019-06-15 16:21:04 +02:00
0c52262e4a
white space adjustments
2019-06-15 15:44:15 +02:00
9f35267470
not needed
2019-06-15 15:43:43 +02:00
85e6885ea7
white space adjustments
2019-06-15 15:41:37 +02:00
3de3ebdd43
documentation was missing
2019-06-15 15:40:43 +02:00
82bb887cdf
white space adjustments
2019-06-15 15:40:22 +02:00
856ef15184
moved (back) to a better place
2019-06-15 15:37:13 +02:00
57a0d33293
consistent names
2019-06-15 14:33:20 +02:00
8c5d0a5591
populateGrains and material_phase not needed
2019-06-15 14:10:45 +02:00
937a84231f
material_phase is deprecated
2019-06-15 13:57:24 +02:00
72298205a7
Merge branch 'MiscImprovements' of magit1.mpie.de:/damask/DAMASK into MiscImprovements
2019-06-14 17:24:44 +02:00
b720d2b2d7
all keys are small letters
2019-06-14 17:24:26 +02:00
84b60259bf
apparently not needed
2019-06-14 10:08:04 +02:00
3f87a87a4e
wrong counting
...
currently quite ugly, but planned changes for state structure will give
overcome this
2019-06-14 10:05:39 +02:00
083fdb13b4
material_phaseAt and material_phaseMemberAt substitute material_phase
2019-06-14 09:37:01 +02:00
59cb70198e
phasememberAt not needed anymore
2019-06-14 09:17:05 +02:00
9c4f92a01c
substitute phasememberAt with material_phaseMemberAt
...
need to be clear where a global variable is defined
2019-06-14 09:09:16 +02:00
7a878cab3a
phaseAt(c,i,e) substituted by material_phaseAt(c,e)
2019-06-14 09:02:28 +02:00
7a76740c31
using new names
2019-06-14 08:51:23 +02:00
0f531d5dee
clearer name
2019-06-14 08:42:12 +02:00
84c69e0f6e
output names follow variable names
2019-06-13 23:23:11 +02:00
47e0d83562
taking care of compiler hints
2019-06-13 22:24:51 +02:00
47df2b581e
does not exist anymore
2019-06-13 19:09:49 +02:00
4651bfdb90
[skip ci] clearer logic
2019-06-13 09:59:37 +02:00
c7513b010b
use definition from element
2019-06-13 09:13:03 +02:00
17761c1864
better use function arguments
2019-06-13 07:38:19 +02:00
42beb5c227
same label everywhere
2019-06-13 07:25:26 +02:00
78d604df7d
cleaning
2019-06-13 07:06:01 +02:00
e117ffbc0c
cleaning
2019-06-13 00:39:35 +02:00
2d52560b6d
unused
2019-06-13 00:05:29 +02:00
ee8678d606
better readable
2019-06-13 00:01:38 +02:00
b49feea5e9
polishing
2019-06-12 23:31:46 +02:00
b1d06eced2
not used
2019-06-12 21:13:21 +02:00
0a5dc6d503
HDF5 is not always available
2019-06-12 19:59:17 +02:00
8564aa51d1
was missing
2019-06-12 19:57:48 +02:00
9a9e99739e
Merge branch 'marc-mesh-simplification' of magit1.mpie.de:/damask/DAMASK into marc-mesh-simplification
2019-06-12 19:56:57 +02:00
ac493adc5c
commenting and discussing with Franz
2019-06-12 19:11:29 +02:00
ecda57e29a
using rotation class (where possible)
...
differences between backward rotation need to be investigated
2019-06-12 15:58:21 +02:00
648f899838
clearer (and possibly faster) logic
2019-06-12 15:58:21 +02:00
1b595b4864
initialize from Eulers (common case)
2019-06-12 15:58:21 +02:00
04a6054047
no need to transfer data via global variables
2019-06-12 15:58:21 +02:00
a6c0f500ff
simplifying
2019-06-12 15:58:21 +02:00
ab4026e707
pInt not needed
2019-06-11 16:34:07 +02:00
9379d1884e
further cleaning
2019-06-11 16:16:10 +02:00
ceecea418e
no frills
2019-06-11 15:36:04 +02:00
8956f7f6da
pInt not needed
2019-06-11 14:52:27 +02:00
82ab1f5e10
sorted for better readability
2019-06-11 14:29:10 +02:00
f2be94ed5f
function better suited for single return value
...
use correct shapes (1D list) for return value
2019-06-11 14:15:10 +02:00
b2409d6998
cleaning
2019-06-11 13:34:55 +02:00
9dfe71aa06
better readable
2019-06-10 09:42:23 +02:00
c8f3808dab
pInt not needed
2019-06-09 16:30:30 +02:00
f6379e1f0e
cleaning
2019-06-09 16:27:05 +02:00
676c772a98
many variables do not need to be public anymore
2019-06-08 12:02:52 +02:00
54cc3786f5
currently not used
...
needs extension to MPI situations to calculate displacement for HDF5 out
2019-06-08 11:16:47 +02:00
d6d5f4e66f
polishing
2019-06-08 11:15:01 +02:00
aeb57b2fb6
better readable
2019-06-08 10:38:10 +02:00
cb3ce1edd3
removing leftovers from populate grains
2019-06-07 13:39:40 +02:00
deda700be1
simplified
2019-06-07 12:21:12 +02:00
86a720be8c
ensure memory release
2019-06-07 12:19:36 +02:00
ca97c3db18
connectivity is not needed
2019-06-07 10:34:02 +02:00
33ed1fa06c
further removal of mesh quantities
2019-06-07 10:33:49 +02:00
f22fcc7271
further removal of mesh
2019-06-07 10:20:56 +02:00
52f036e062
fixed outdated comment
2019-06-07 08:19:24 +02:00
4025951dc1
missing use caused compilation error
2019-06-07 08:17:26 +02:00
b77ce718cf
mesh_element/theMesh deprecated
2019-06-07 07:49:45 +02:00
c7703d7aaf
preprocessor statements need to start at column 0
2019-06-07 07:45:54 +02:00
042ff7e491
microstructure is only a property of the discretization
...
will be used only by material.f90 once crystallite is removed
2019-06-07 07:44:34 +02:00
ab06fac379
line too long
2019-06-07 07:41:12 +02:00
1e368012b5
now providing all quantities required by plastic_nonlocal
2019-06-07 07:38:48 +02:00
2a35a78d93
phase out mesh_elem and theMesh
2019-06-07 07:38:48 +02:00
d07cdf85de
initialize correctly
2019-06-07 06:07:00 +02:00
9aeb1a9da1
PETSc-FEM solver needs to initialize discretization module
2019-06-07 00:20:35 +02:00
57547b5aa6
cleaned
2019-06-07 00:04:20 +02:00
87bc95e6fb
IPvolume is only needed for nonlocal
2019-06-06 23:17:02 +02:00
9ab6147de8
bugfix: wrong number of IPs
2019-06-06 23:00:40 +02:00
cfc1dcf04b
mesh_elem and theMesh are deprecated
2019-06-06 22:49:17 +02:00
0720da29fb
mesh_element is deprecated
2019-06-06 21:14:37 +02:00
f0adcc665c
discretization contains now all information to substitute mesh
...
only plastic_nonlocal needs extra information
2019-06-06 20:54:19 +02:00
14da4f8e43
easier to store positions than displacement
2019-06-06 18:28:10 +02:00
e4c1102bdb
names consistent with marc connectivity
2019-06-06 14:05:04 +02:00
a4cce1bf61
new module "discretization"
...
should replace the part of mesh that is not only needed by
plastic_nonlocal
2019-06-06 13:59:16 +02:00
00189554cd
correct style
2019-06-06 13:22:46 +02:00
c0964dfd88
disable coordinate update for the moment
2019-06-06 13:13:22 +02:00
73d41ffaf7
less global variables
2019-06-06 13:08:10 +02:00
9e8bc7d9b1
better names
2019-06-06 11:08:58 +02:00
eb8c41b3b5
cleaning
2019-06-06 10:43:08 +02:00
2f40f7a727
separating
2019-06-06 08:34:01 +02:00
b127dcf44e
separating mesh and nonlocal related geometry
2019-06-06 08:19:29 +02:00
a3304db1ce
no clutter
2019-06-06 08:16:36 +02:00
402502d6cd
prepare cleaning
2019-06-06 08:16:07 +02:00
6a8cea90d5
simpler way to calculate IP neighborhood
2019-06-06 07:37:37 +02:00
d13d6549af
polishing
2019-06-05 20:29:14 +02:00
4b6ff59e49
make public variables visible
2019-06-05 20:18:19 +02:00
3990284b63
sorting face definitions of each cell
2019-06-05 18:57:03 +02:00
df7d8b1043
not needed
2019-06-05 18:57:03 +02:00
efac905fb2
less module wide variables
2019-06-05 18:57:03 +02:00
9b37c62e15
mesh_element is deprecated (meaningless name)
2019-06-05 10:05:59 +02:00
64ae894e5e
leaner code
2019-06-05 10:02:55 +02:00
4b57722446
initial ideas for simplification of IP neighborhood determination
...
much easier for one type of element
2019-06-05 08:22:34 +02:00
3c46296941
cleaning
2019-06-05 00:36:25 +02:00
6bd380bcfd
using (partly) the cell new cell node definition
2019-06-04 22:02:54 +02:00
d0602513ac
write out and calculate cell and element connectivity
2019-06-04 21:30:51 +02:00
04ee252be7
Merge branch 'development' into marc-mesh-simplification
2019-06-04 20:29:01 +02:00
96cb2a8fb8
mesh needs HDF5+results for connectivity
2019-06-04 20:22:53 +02:00
f51599eda7
easier to read
2019-06-04 19:13:01 +02:00
7bfc25ba23
Merge branch 'development' into marc-mesh-simplification
2019-06-04 18:59:17 +02:00
951134d13f
not needed
2019-06-04 12:06:16 +02:00
d4392dc1bd
one implicit none is enough
2019-05-30 23:58:59 +02:00
ce9d6a5077
Merge branch 'development' into grid-mesh-cleanup
2019-05-30 23:52:37 +02:00
305c72584f
Merge branch 'development' into test_PETSc_pointer
2019-05-30 17:31:51 +02:00
358272eb2e
not needed, better readable without
2019-05-28 12:29:46 +02:00
a5c6e4b17c
do not clutter the code with use statements
2019-05-28 12:06:21 +02:00
0db4264265
cleaning
2019-05-28 09:28:15 +02:00
6283ffa024
Merge branch 'development' into cleaning-pInt-use
2019-05-28 09:19:43 +02:00
b35465b591
gamma_slip_ID should be used to write result
2019-05-20 19:08:56 +02:00
2d366f8aca
no clue where or when this was used
2019-05-18 23:20:22 +02:00
2ccfc9f6da
simpler to use variables directly
2019-05-18 23:10:40 +02:00
93827b8809
not needed
2019-05-18 23:03:02 +02:00
c4f07a9ad9
need to correct tensor order
2019-05-18 22:03:59 +02:00
1de0c7e652
wrong name
2019-05-18 22:03:59 +02:00
60c2a5fc06
loop (forall) over integration points wrong
...
this was done for each integration point, but this was not detected for
the forall loop
2019-05-18 22:03:59 +02:00
86205f5081
gfortran complaints about repeated dimension attribute
...
we need to decide whether we want to repeat the declaration of the
interface or not
2019-05-18 09:54:16 +02:00
34bcd38240
cleanup
2019-05-18 07:43:41 +02:00
2258bfb221
RGC as submodule
...
submodules inherit use-associated entities and implicit none/private
statements
2019-05-18 07:23:46 +02:00
ed8af98d69
don't clutter with use statements
2019-05-18 06:54:45 +02:00
3db32102a3
algorithm to split elements into cells
...
- finds all shared nodes
- needs polishing
2019-05-17 13:22:52 +02:00
c6b5d45944
cleaning
2019-05-17 12:43:42 +02:00
7ac0013271
more consistent private/public declarations
2019-05-17 05:24:36 +00:00
7b620e3ce9
[skip ci] consistent with rest of the module
2019-05-17 06:49:25 +02:00
dce4775c17
removal of RGC out led to undefined variable
2019-05-17 06:36:30 +02:00
3df9a8d58c
focus on the physics
2019-05-16 23:14:47 +02:00
01e3b646c2
don't clutter the code with useless stuff
...
we only need to be more strict about prefixing
functions/subroutines/variables to see in which module they reside
2019-05-16 22:56:48 +02:00
028bdcff22
less compiler complaints
2019-05-16 22:24:42 +02:00
6df563624d
type needed for postResults
2019-05-16 21:57:20 +02:00
f8b335a3a4
loop (forall) over integration points wrong
...
this was done for each integration point, but this was not detected for
the forall loop
2019-05-16 18:24:54 +02:00
39a75c2015
phasing out postResults
...
starting with RGC because it is rarely used and removing it here allows
to go ahead with the submodule structure for homogenization
2019-05-16 10:23:23 +02:00
789420c9d6
Merge branch 'no-pInt-implicitNone' into 'development'
...
No pInt and implicit none
See merge request damask/DAMASK!81
2019-05-15 21:40:13 +02:00
d29967d8b2
Merge remote-tracking branch 'remotes/origin/improve-Lp-guessing' into development
2019-05-15 08:10:46 +02:00
346c7c4a7f
one implicit none is enough
2019-05-14 23:12:32 +02:00
51e19048f7
pInt not needed anymore
2019-05-14 22:52:33 +02:00
9249b7f4af
improved column alignment of indices such as (g,i,e)
2019-05-14 19:52:48 +02:00
f3d8b960fd
included Li in list of protected quantities for fake cutback
2019-05-14 19:46:25 +02:00
0dbc6fb435
usage example
2019-05-14 11:52:28 +02:00
4bce087d3d
separating functionality (stub only)
...
- mesh (initialization depends on type of solver) only provides
information about number of elements, IPs and writes out displacements
- new module (will get setter functions for solver specific
initialization) will provide information that is only used by the
nonlocal model
2019-05-14 11:42:00 +02:00
3be5c6a5bc
Merge remote-tracking branch 'origin/development' into grid-mesh-cleanup
2019-05-14 11:13:09 +02:00
a8b9b5d1c9
homogenizationAt array had wrong shape for MPI (too large)
2019-05-14 08:11:23 +02:00
387c45d0f4
Merge branch 'MiscImprovements' into 'development'
...
Misc improvements
See merge request damask/DAMASK!79
2019-05-14 07:32:57 +02:00
8dea95879c
specific for nonlocal, can be calculated during post processing
2019-05-14 07:22:29 +02:00
c9f1f8756d
better name/not needed
2019-05-14 06:06:01 +02:00
cac472c506
cleaning
...
more complex initialization will be used by FEM solvers only
2019-05-14 00:13:43 +02:00
c8794af3bb
better readable
2019-05-13 23:18:02 +02:00
fb49acdb97
more explicit
2019-05-13 22:54:18 +02:00
4c148f1a07
not needed
2019-05-13 22:15:29 +02:00
998789528c
Merge branch 'HDF5-out-homog-2' into 'development'
...
Hdf5 out homog 2
See merge request damask/DAMASK!78
2019-05-13 17:34:59 +02:00
89dbe1ad03
[skip ci] mismatch tensor is dimensionless
2019-05-13 17:33:45 +02:00
df01a3ff36
only for internal use
2019-05-13 00:00:14 +02:00
344e6ca51a
IP volume is trivial for spectral solver
2019-05-12 23:56:44 +02:00
6e96a57781
write all outputs to HDF5
...
not 100% sure about the units
2019-05-12 15:14:29 +02:00
7d5f5afe01
further cleaning
2019-05-12 13:11:30 +02:00
f0f8be7840
not used
2019-05-12 10:05:40 +02:00
8286a289df
try to directly allocate pointers
2019-05-12 09:52:56 +02:00
7f0008c4a3
not used at the moment
2019-05-12 09:37:59 +02:00
b3f429165d
use cascaded use statements
2019-05-11 12:10:23 +02:00
d76a360fa7
use cascaded include (math provides prec)
2019-05-11 11:58:54 +02:00
436dae8dd5
cleaning
2019-05-11 11:52:05 +02:00
90440b50b7
prec provides IEEE module
2019-05-11 11:19:06 +02:00
93ded62e32
better readable
2019-05-10 16:38:47 +02:00
6e98dd83fb
was accicently removed
2019-05-10 16:00:53 +02:00
70b7cbea7c
does not exist anymore
2019-05-10 15:47:27 +02:00
b8c8c4ade6
follow numpy naming convention
2019-05-10 15:19:00 +02:00
1cf6cc217d
one implicit none is enough
2019-05-10 15:12:40 +02:00
811fc5c30c
don't put implementation details in function name
2019-05-10 15:03:54 +02:00
c81a90350c
not needed anymore
2019-05-10 15:00:48 +02:00
dc57f6aba0
better use transpose
2019-05-10 14:53:22 +02:00
e25b4d6f17
math for quaterion / orientation have own classes
2019-05-10 14:52:01 +02:00
ecb520e6f0
Merge branch 'development' into improve-Lp-guessing
2019-05-10 08:12:58 +02:00
f3a02a8e6b
simplified
2019-05-09 08:33:12 +02:00
72110d509c
one implicit none is enough
2019-05-09 08:30:03 +02:00
23cf134d6c
cleaning 2
2019-05-08 22:41:09 +02:00
c191336045
cleaning
2019-05-08 22:26:14 +02:00
6c02d71019
Merge branch 'development' into MiscImprovements
2019-05-08 22:19:12 +02:00
9b698cbdf5
correct description of subroutines
2019-05-08 17:56:20 +02:00
1060b13c1f
Corrected the comment
2019-05-08 16:50:46 +02:00
77856159f0
Merge branch 'development' into No-Populate-Grains-3
2019-05-07 19:59:40 +02:00
f3c77cde87
Merge branch 'development' into MiscImprovements
2019-05-06 16:16:39 +02:00
39cc9e35ae
Merge branch 'development' into orientation_with_averaging
2019-05-05 22:12:09 +02:00
f873d84e5c
enable HDF5 out for non-MPI
2019-05-05 15:40:27 +02:00
4a0584fe25
commercial FEM solvers write results to HDF5
2019-05-05 12:06:55 +02:00
11eb5a62b8
removed complex population of grains
...
- more explicit material.config
- simulation results do not depend on random number/compiler
- more suitable for phase field simulations with changing constituents
2019-05-04 22:07:10 +02:00
8c1f8fbef9
cleaning
2019-05-04 19:26:53 +02:00
d5f80c7f6d
Merge branch 'development' into MiscImprovements
2019-05-04 18:16:09 +02:00
21a36b5a7d
errors better visible
2019-05-04 17:47:52 +02:00
464a2e217e
not needed
2019-05-04 17:18:05 +02:00
bf4c5741b9
cleaning
2019-05-04 14:41:00 +02:00
ebf01dee4f
store grid/size at geometry group
...
as outlined in the DAMASK results paper
2019-05-03 06:46:22 +02:00
a881205561
CLI options not used to control PETSc
2019-05-03 06:21:43 +02:00
434813e6e5
use unique IDs among all models
2019-04-30 23:06:16 +02:00
2f27c64c39
homogenization output active
2019-04-30 23:05:21 +02:00
badfba8c6f
simplify includes
...
following python suggestions to include only once at the top of a module
2019-04-30 22:53:32 +02:00
eb7db3acbd
trying to use variables as in the DAMASK paper
2019-04-30 22:47:49 +02:00
8a9baf6d78
preparing output of mech_homog to HDF5
2019-04-30 18:45:38 +02:00
5a0e408d59
Merge branch 'development' into SolverRestart-in-HDF5
2019-04-30 17:07:45 +02:00
4eef54f4d2
Merge branch 'development' into improve-Lp-guessing
2019-04-30 10:43:47 +02:00
9703d04a7d
grid/mesh for mesh needs rename
...
keep the old naming/location for the moment consistently for all solvers
2019-04-30 06:31:03 +02:00
b8bf329a74
Merge branch 'development' into MiscImprovements
2019-04-30 00:02:35 +02:00
d74599d39a
Merge branch 'HDF5-postprocessing' into 'development'
...
Hdf5 postprocessing
See merge request damask/DAMASK!72
2019-04-29 23:24:42 +02:00
f628c80542
not supported anymore
2019-04-29 12:17:33 +02:00
39e6cedfb4
more direct and readable
2019-04-29 11:15:23 +02:00
477478f66c
source code structure reflects build targets
2019-04-29 10:43:49 +02:00
b4a21e8d40
fix for older cmake
...
looks ok
2019-04-26 18:07:43 +02:00
b63a6c7034
cleaner code that also works with older cmake
2019-04-26 17:39:21 +02:00
7104bc9934
allow standard CMAKE way of setting install directory
...
- DAMASK_BIN in config has no effect anymore
2019-04-25 07:08:32 +02:00
d8b310e78b
Changed Guessing Scheme
2019-04-18 11:13:51 -04:00
ce1bb589c7
complicated use statements confuse CMake
...
probably we should adopt a similar "use" policy in Fortran as
recommended for Python "import" and have all imports at the beginning
https://www.python.org/dev/peps/pep-0008/
2019-04-18 15:30:54 +02:00
7c771647ad
adjustments for easier access to output data
2019-04-18 11:55:50 +02:00
fdd5b93e7c
avoid FPE exceptions
2019-04-17 15:19:41 +02:00
a6e6db0559
more stable/robust conversions
2019-04-17 12:52:48 +02:00
5d23a61fb0
same order as in the python module
...
... and only one "implicit none"
2019-04-16 22:17:56 +02:00
ed8270d432
need to read reference stiffness
2019-04-16 14:53:36 +02:00
d0a4cbf8d5
one implicit none is enough
2019-04-15 16:41:54 +02:00
8f58f1348e
_pInt not needed
2019-04-15 16:19:30 +02:00
19dfefc2f4
fixed deadlock in grid_mech_FEM
2019-04-15 16:16:14 +02:00
4793f964f8
unified style
2019-04-15 15:53:46 +02:00
18f9deef1a
fixed deadlock
2019-04-15 15:27:58 +02:00
1e2766cda6
not needed
2019-04-13 15:37:34 +02:00
c4784e6673
better readable
2019-04-13 15:34:51 +02:00
89679147e8
leaner group structure, centrally handled
2019-04-13 09:47:56 +02:00
1036c76ae0
to transpose already when constructing the interaction matrix
2019-04-13 00:46:27 +02:00
ffdd3955a3
implicit none is not needed
2019-04-13 00:44:00 +02:00
0335207956
complex orientation initialization conflicts with phase field
...
- easier to do as pre processing (python)
- ensures same solution independently of random number
2019-04-13 00:37:51 +02:00
a59c5c30c9
some cleanup
2019-04-11 18:48:28 +02:00
057bee92af
adding C_ref to HDF5 file doesnt work
2019-04-11 18:43:20 +02:00
a5b3fa565f
Some incorrect variable names fixed
2019-04-11 18:36:28 +02:00
8609c959df
grid_mech_polarisation works
2019-04-11 15:51:34 +02:00
12efa108d6
store grid and size
...
store it temporarly at "mappings", later on they will be attached to the
(no yet existing) coordinates
2019-04-11 15:44:34 +02:00
3c8d96c54c
enable more complex attributes
2019-04-11 15:44:08 +02:00
8e295cbadf
no need to create type for native data types
2019-04-11 12:48:39 +02:00
52555d8c3c
key words don't contain small letters
...
moved more variables from numerics to crystallite
2019-04-11 11:27:03 +02:00
8f7239b75d
repetition not needed
...
- implicit none at the beginning of the module is enough
2019-04-11 07:35:58 +02:00
67eb39255a
keep connected data together
...
- avoids dependencies
- easier to read and modify
2019-04-11 07:24:04 +02:00
8d90cfb600
unused variables
2019-04-11 06:46:31 +02:00
da034f971c
Merge branch 'HDF5-out-3' into 'development'
...
Hdf5 out 3
See merge request damask/DAMASK!70
2019-04-10 20:39:37 +02:00
1852f580ad
grid_mech_FEM works
2019-04-10 18:19:10 +02:00
5989075009
working for grid_mech_spectral_basic
2019-04-10 13:23:57 +02:00
c2cb8e2033
HDF5/results need rotation
2019-04-07 17:46:35 +02:00
c3925b3497
small polishing
2019-04-07 14:47:21 +02:00
0b70f01e04
polishing
2019-04-07 14:28:08 +02:00
2fa8691335
prefix is added centrally already
2019-04-07 14:26:01 +02:00
7d0ebc4ded
implicit none only needed once per module
2019-04-07 14:24:46 +02:00
b2e293057a
write rotation to results file
2019-04-07 14:02:24 +02:00
d6d3f7aad7
write rotation as quaternion to HDF5 in named type
2019-04-07 13:26:23 +02:00
0b2c6c69c2
number ID as prefix to section names
...
enables unique and consistent section names for output
2019-04-07 13:20:44 +02:00
5075e1c2fb
constituent (ex crystallite) results are stored in HDF5
...
currently, not the best code but new structure for crystallite data will
fix that
output of orientations still missing
2019-04-06 12:08:25 +02:00
1aed224c3b
numerically more stable
...
avoids division by zero
2019-04-06 12:08:25 +02:00
bfb6ad557f
WIP: crystallite HDF5 results
...
will be stored according to the phase sections
2019-04-06 12:08:25 +02:00
7af3e70061
no pInt
2019-04-06 12:08:25 +02:00
ab5a29b559
explicit import
...
for some reasons, ifort does not resolve the specific subroutine for the
writeDataset interace otherwise
2019-04-06 08:01:10 +00:00
6553fe815e
proper indentation
2019-04-06 07:56:47 +00:00
b52d5ab20b
some more outputs
...
mainly done by Vitesh, copied it from other branch
2019-04-05 22:23:02 +02:00
ccaea6b9d9
Merge branch 'development' into HDF5-out-3
2019-04-05 21:50:19 +02:00
72b30729bb
submodule for homogenization
...
first draft, RGC not included because of name clash with isostrain
2019-04-05 21:46:00 +02:00
489a24afd8
consistent names
2019-04-05 20:58:56 +02:00
148440c16e
consistent indentation
2019-04-05 20:51:57 +02:00
4aa52fa83f
no pInt
2019-04-05 20:45:56 +02:00
adebbcf5df
preprocessor statements confuse cmake
2019-04-05 20:14:01 +02:00
7c30be47b0
mapping for materialpoint/homogenization
...
HDF5 file writing active for MSC.Marc/Abaqus (optional)
2019-04-05 16:53:41 +02:00
049cd96bbf
introduced constituent mapping
...
this mapping will be used to find for a given location in the mesh the
constituent (phase/crystallite) results
2019-04-05 14:02:24 +02:00
63e6d60949
[skip sc] wip: implementing mapping for HDF5
2019-04-04 16:33:12 +02:00
953acf9c71
introducing new mappings
2019-04-04 13:25:29 +02:00
280a11c4bc
avoid checking of unitialized variables
2019-04-04 11:49:23 +02:00
bc4b79a3a2
writing results out
...
credits to Vitesh
2019-04-04 10:04:44 +02:00
811883df28
avoid error for empty datasets
2019-04-04 10:03:52 +02:00
658befa1a1
no pInt and some renames
2019-04-04 09:12:57 +02:00
4cac2448d4
writing more results out
2019-04-04 07:52:36 +02:00
d0b1db1966
use consistent pre processor macro
2019-04-04 07:42:59 +02:00
19b1bc5e76
consistent use of keyword
2019-04-03 21:43:00 +00:00
5f462729c7
was .or., i.e. should be max not min
2019-04-03 21:42:30 +00:00
43bf51da67
copy and paste error in installation target of FEM
2019-04-03 20:23:46 +02:00
f4c507942a
let cmake do the work
2019-04-03 18:38:46 +02:00
bdaa703d37
forall is deprecated, do concurrent not yet established
2019-04-03 18:26:43 +02:00
b0f9444175
correct types (PGI complained)
2019-04-03 16:25:58 +00:00
453eb538f7
preparing for PGI compiler
2019-04-03 16:24:15 +00:00
43ead134d2
using correct comparison
...
-MIN is the minimum version that works
-MAX is the maximum version that works
2019-04-03 14:49:16 +02:00
9759d3d041
forall is deprecated
...
- performance-wise, there should be no difference for the small loops we
have
- still, the on-liner syntax was much nicer
2019-04-03 13:25:01 +02:00
4724e42b7f
fixed indentation
2019-04-03 13:11:18 +02:00
3887d5631a
handling of PGI compiler was to cumbersome
2019-04-03 13:04:03 +02:00
e33807aab3
fixed indentation
2019-04-03 12:54:07 +02:00
1d31c5c2db
pInt not needed
2019-04-03 12:32:30 +02:00
48633d887b
allow to specify min and max of PETSc separately
2019-04-03 11:53:59 +02:00
3a8f48a0f8
easier to adjust to new versions
2019-04-03 08:25:42 +02:00
4604e65a42
use matmul instead of hand-written functions
...
- performance is the same
- leaner code
- matmul works (was buggy a few years ago)
2019-04-03 08:22:04 +02:00
bcaadac79a
simplification in agreeemnt with the paper
2019-04-02 15:39:55 +02:00
a5827c5ef3
using suitable defaults for damage
2019-03-29 14:26:32 +01:00
be421f0cf5
use FFTW default flag and constants from include file
2019-03-29 08:48:32 +01:00
019d241c67
keyword "spectralsolver" is currently used in the tests
...
should become grid_mech soon
2019-03-29 08:45:25 +01:00
8aee3d7f54
use list from separate module
2019-03-29 08:34:44 +01:00
5ffe78ff1f
bugfix: strain rate was missing
...
dot_gamma is per definition positive, abs only confuses the reader
2019-03-28 09:47:03 +01:00
32c03d0b9b
keyword has not changed (yet)
2019-03-28 09:20:24 +01:00
9f2559baf5
allow defaultVal string of variable length
2019-03-28 07:04:48 +01:00
4470ecfe4a
better have a separate module
2019-03-28 06:52:17 +01:00
6996eb36c0
more renames
2019-03-28 06:39:07 +01:00
daab9263d3
using names from DAMASK paper
2019-03-27 23:09:45 +01:00
3700bacccc
consistent indentation
2019-03-27 22:42:02 +01:00
464375a54e
pInt does not add any value
2019-03-27 22:12:31 +01:00
454898a235
Merge branch 'development' into MiscImprovements
2019-03-27 19:52:56 +01:00
1e20e94792
Merge remote-tracking branch 'remotes/origin/Grid-FEM-2' into development
2019-03-27 16:57:20 +01:00
1f41549a2c
avoid explicit loops
2019-03-27 12:37:48 +01:00
6070c0c2b1
f***ing windows always sets executable bit
2019-03-26 21:44:58 +01:00
1ff55b6374
not supported by ancient compiler needed for Abaqus
2019-03-26 21:44:25 +01:00
bff03063e2
simpler logic
2019-03-26 21:44:25 +01:00
ce2cb16921
better define variables close to their usage
2019-03-26 07:36:55 +01:00
49ff1454a9
no need for explicit loops
2019-03-26 06:47:17 +01:00
1869f2cdcd
string length handling in-line with other functions
2019-03-26 06:27:13 +01:00
2feb79833c
better use functions than global variables
...
need to design a test before full migration
2019-03-25 21:54:08 +01:00
17455d1dc6
syntax polishing
2019-03-25 19:17:10 +01:00
27da4b2b7a
pInt not needed
2019-03-25 18:28:07 +01:00
761dcb0358
no need for explicit loop
2019-03-25 18:04:53 +01:00
df32759825
Merge remote-tracking branch 'origin/development' into MiscImprovements
2019-03-25 16:35:32 +01:00
0503a80943
avoid the use of global variables
...
better to define variables where they are used
2019-03-25 15:54:51 +01:00
12723d7247
running test (hopefully)
2019-03-25 13:10:56 +01:00
010fd0b862
using config_numerics instead of global values
2019-03-25 09:36:59 +01:00
af611d7ca4
Merge branch 'Dislotwin-Names-as-in-paper' into 'development'
...
Dislotwin names as in paper
See merge request damask/DAMASK!66
2019-03-25 09:16:36 +01:00
29fff6b158
fixed reporting and restart
2019-03-25 08:09:09 +01:00
19af34e054
cleaned
...
- no Pint
- consistent indentation
2019-03-24 12:07:51 +01:00
293f869fe5
improved signal handling
...
- possibility to catch SIGTERM
- functions to set SIG(TERM/USR1/USR2) explicitly
2019-03-24 11:59:00 +01:00
728dac5a48
separate module for linked list
2019-03-24 11:40:05 +01:00
dada4e69b6
consistent use of 2 blanks, no pInt
2019-03-24 11:28:20 +01:00
320f39925a
modernized
...
- no pInt
- consistent indentation by 2 spaces
- no leftovers from old file parsing
2019-03-24 11:18:59 +01:00
0f2013e78a
modernized
...
- no pInt
- consistent 2-blank indentation
- use of parameter structure
2019-03-24 11:01:27 +01:00
c1d4b64b13
better use intrinsic F2003 features
2019-03-24 10:48:46 +01:00
2e164a1ddd
need to write out these tensors for restart
2019-03-24 09:51:47 +01:00
0fecac4f2a
load case rotation works for polarisation solver
2019-03-23 16:47:26 +01:00
a06be13d49
following structure of mech_spectral_basic
2019-03-23 15:39:28 +01:00
7ccb5c1fa3
enables load case rotation feature
2019-03-23 14:25:05 +01:00
5a3689770a
restart for grid mech FEM now working
2019-03-23 10:46:56 +01:00
d55a7da592
renaming "spectral" to "grid"
2019-03-23 09:27:58 +01:00
593fa24bad
remove global variables
2019-03-23 06:53:29 +01:00
798c5bb633
initial takeover from older branches
2019-03-23 06:21:18 +01:00
72476ae796
internal (private) functions at the end of the module
2019-03-22 16:02:00 +01:00
b8117d4057
LpAndItsTangent called kinetics_twip a second time instead of kinetic_trans
2019-03-22 15:31:29 +01:00
5050f21a6e
[skip ci] more renames for consistency
2019-03-22 12:28:53 +01:00
6966e68403
more renames (following DAMASK paper)
2019-03-22 11:40:52 +01:00
f50e6fe5ad
[skip ci] adjusting to disloUCLA
2019-03-22 11:32:55 +01:00
450a0565d3
internal variable names also adjusted
2019-03-22 11:06:08 +01:00
bd6b7e1854
correct signs (same behavior, but full math)
2019-03-22 10:58:54 +01:00
c9c9079076
fixed indentation
2019-03-22 10:55:17 +01:00
fa96042320
correct names for shear rates
2019-03-22 10:49:24 +01:00
f12b66b409
wrong keyword
2019-03-22 09:26:39 +01:00
28caf5ed4d
final rename (for the moment)
2019-03-22 06:57:32 +01:00
5dc5a25ab3
simplified dotState
2019-03-22 06:48:38 +01:00
ad563b99a8
Merge branch 'development' into DisloUCLA-Names-as-in-paper
2019-03-21 08:12:36 +01:00
17f955d3e8
still renaming
2019-03-21 08:07:09 +01:00
25f2d78656
final renames (for the moment)
2019-03-21 00:15:10 +01:00
9936b382fd
more renames
2019-03-20 21:51:52 +01:00
97f6566d98
more renames
2019-03-20 16:52:43 +01:00
facef25f8e
renaming to fit paper and/or disloUCLA
2019-03-20 09:46:49 +01:00
349acce9f2
more renames to follow dislotwin and/or paper
2019-03-20 09:38:38 +01:00
5f53147e96
wrong assignmen (scalar to vector)
2019-03-19 14:56:36 +01:00
8a07ff4617
fixed copy and paste errors
2019-03-19 14:17:06 +01:00
98d25ae48a
more name adjustments
2019-03-19 07:00:03 +01:00
1b53040f5e
intermediate results should not be stored
2019-03-19 06:52:06 +01:00
d22f41eeaa
better readable
2019-03-19 06:25:21 +01:00
d9e497bdd8
prefactors were not used/not mentioned in the paper
2019-03-19 06:21:40 +01:00
a12417a091
as in dislotwin
2019-03-19 05:46:47 +01:00
fc997554ba
Simplified tangent calculation, thx to Karo
2019-03-18 23:11:28 +01:00
f9e47a94aa
no pInt
2019-03-18 22:57:23 +01:00
fbc607e14d
no pInt
2019-03-18 22:53:24 +01:00
7d40d13b4c
simplifying
2019-03-18 22:44:54 +01:00
5f85a65fe6
shorter name, inline with the paper
2019-03-18 22:37:32 +01:00
3eb7f868bf
pInt not needed
2019-03-18 22:17:11 +01:00
76dee8cb81
renaming according to paper
2019-03-18 22:08:41 +01:00
66aa9399a7
don'r rely on halton sequence
...
not really trustworthy as we saw some pattern for higher dimensional
data
2019-03-17 18:06:41 +01:00
6d268b7b37
some polishing
2019-03-17 17:59:01 +01:00
dac4f5cd22
syntax polishing
2019-03-17 17:02:08 +01:00
5f41d6d9b4
no pInt
2019-03-17 13:35:41 +01:00
d7739fa8f8
no derived quantities in postResults
...
preparing for HDF5 out
2019-03-17 13:29:58 +01:00
52b54ddf23
direct access to state variable
2019-03-17 12:36:15 +01:00
fa513778c0
array access was wrong
...
now using the rectified dislocation density from "getRho". This results
in a slightly more conservative sensitivity check
2019-03-17 11:51:26 +01:00
730e7d96c0
better readable
2019-03-16 21:58:30 +01:00
8f89827573
improved readability
2019-03-16 19:09:22 +01:00
f079e6f9c0
simpler logic for shortrange stress correction
2019-03-16 16:29:16 +01:00
117f4b9625
more functions relying on getRho
2019-03-16 15:46:39 +01:00
5da017e79f
using new funtionality to get rho
2019-03-16 15:08:50 +01:00
eb2646ca9c
improving readability
...
- arrays to access specific dislocation types
- function to access and clean rho
2019-03-16 13:13:48 +01:00
510c0da02c
more systematic names
2019-03-16 08:55:25 +01:00
a4d7ce48b3
Decided on one DAMASK logo
2019-03-13 22:23:09 +01:00
cba02d91b9
no need to import pInt
2019-03-13 07:00:20 +01:00
c7f33f4696
no pInt
2019-03-13 06:46:59 +01:00
81cfa31b31
[skip ci] with DAMASK ASCII art
2019-03-13 06:16:31 +01:00
fb6a6e9db5
[skip ci] corrected year
2019-03-12 22:56:09 +01:00
7d23b77ad0
Merge branch 'development' into MiscImprovements
2019-03-12 22:37:53 +01:00
7cb2203a38
pInt not needed anymore
2019-03-12 22:29:03 +01:00
40fda62efc
parsing material.config and debug.config
2019-03-12 22:27:45 +01:00
62694eddf8
clearer structure
2019-03-12 21:48:33 +01:00
9a38951725
finished renaming: spectral -> grid
2019-03-12 18:56:28 +01:00
fdc8a848a5
no pInt + same indentation everywhere
2019-03-12 11:36:18 +01:00
818338ca93
new label needs new tests, will be done later
2019-03-12 11:17:15 +01:00
1ece0a1dfd
better readable
2019-03-12 09:36:54 +01:00
1df8b22e23
clearer names
2019-03-12 09:28:06 +01:00
2353545779
using new names
2019-03-12 06:06:59 +01:00
c57bfd34e9
no need for long names
2019-03-12 05:53:12 +01:00
6495276b81
bugfix: rename from "solution" to "solution_vec" was incomplete
2019-03-12 05:52:13 +01:00
643ed89447
not needed anymore
2019-03-12 00:07:44 +01:00
2505c02c75
bugfix
2019-03-11 23:55:04 +01:00
94cf563141
new name
2019-03-11 23:51:04 +01:00
011af1f686
adjusting names
2019-03-11 23:37:06 +01:00
23043da98c
more sensible names
2019-03-11 23:10:40 +01:00
6a82a0a33e
proper indentation
2019-03-11 23:04:00 +01:00
1fb1032127
no pInt
2019-03-11 22:58:11 +01:00
18fe8c34ee
fortran fast storage of interaction matrices
2019-03-11 22:41:59 +01:00
0cdcc4de11
no pInt any more
2019-03-11 17:35:08 +01:00
f203add899
not needed
2019-03-10 12:58:07 +01:00
340617ab65
unifying notation
2019-03-10 12:05:52 +01:00
550b6510a5
better name
2019-03-10 12:05:52 +01:00
c8f426a875
use variables from mesh object
2019-03-10 12:05:52 +01:00
927f947c2a
better readable
2019-03-10 10:05:47 +01:00
8661d6e82f
PGI complaines, forall is deprecated anyway
2019-03-10 10:05:47 +01:00
11662033c3
seems to cause problems with PGI as well
2019-03-10 10:05:47 +01:00
60f4f9f39c
norm2 for PGI
2019-03-10 10:05:47 +01:00
05b4dd1973
correct type casting
2019-03-10 10:05:47 +01:00
714c9b1ecb
PGI does not no "do concurrent" (yet)
2019-03-10 10:05:47 +01:00
388e661433
use explicitly pReal
2019-03-10 10:05:47 +01:00
0118fefe6e
wrong type
2019-03-10 10:05:47 +01:00
96c4599dc7
norm2 is (yet) not available in PGI
2019-03-10 10:05:47 +01:00
34660599a1
dummy HDF5 output for all plasticity laws
2019-03-09 20:43:31 +01:00
7643d66654
bugfix, avoid error
2019-03-09 16:22:57 +00:00
55d55a156b
following numpy syntax
2019-03-09 16:19:56 +00:00
121bafd989
required for HDF5 output
2019-03-09 15:55:25 +00:00
22a3596561
simplified, trying to get rid of all public variables
2019-03-09 15:12:59 +01:00
c74f453486
public variables not needed anymore
2019-03-09 15:12:59 +01:00
1bf31598c5
avoid usage of lattice variables
2019-03-09 15:12:59 +01:00
eba763cf38
not needed anymore
2019-03-09 15:12:59 +01:00
f0d03a41ba
fracture modes are calculated differently
2019-03-09 15:12:59 +01:00
7bfd7a42ea
empty file needs special case for Ifort
2019-03-09 13:43:56 +01:00
383e1befd5
polishing and extending citations
2019-03-09 11:11:40 +01:00
1ba27cf62d
same reporting style, more error checks
2019-03-09 11:11:40 +01:00
6f3771f6c4
Allreduce better suited than Bcast
2019-03-09 11:11:40 +01:00
66e6a6ec68
cleaning
2019-03-09 11:11:40 +01:00
0d08659b2a
general cleaning
2019-03-09 11:11:40 +01:00
2394880741
Tstar renamed to S (following the DAMASK paper)
2019-03-09 11:11:40 +01:00
02c7b1056a
use central functionality
...
IO function reads numerics.config and debug.config
2019-03-09 11:11:40 +01:00
ae5ea87ab1
cleaning
2019-03-09 11:11:40 +01:00
2621689843
correct initialization
2019-03-09 08:01:20 +01:00
af707c671c
improved IO functionality
...
- naming for file opening follows python
- damage modules do not read from file any more
2019-03-08 23:16:56 +01:00
48cfc35996
polishing
2019-03-08 23:16:35 +01:00
09a7427193
temporarly disabled restart
2019-03-08 23:16:08 +01:00
363a95d5b7
not needed
2019-03-08 19:07:19 +01:00
67dcb6d2d6
not needed
2019-03-08 19:07:19 +01:00
622372bd64
where within forall does not work with PGI
2019-03-08 19:07:19 +01:00
0f6bf38299
unused functionality
2019-03-08 19:07:19 +01:00
ce0e84f418
was not used anymore
2019-03-08 19:07:19 +01:00
de330517eb
rank not supported by older compiler/older dialects
2019-03-08 07:42:13 +01:00
3b1328163c
cleaned
2019-03-07 23:19:39 +01:00
de6fd605ee
is not used anywhere else
2019-03-07 22:47:45 +01:00
a4cdbab7cf
not needed
2019-03-07 22:44:33 +01:00
4a636dbd99
not used at all
2019-03-07 22:41:07 +01:00
8224797e75
simplified
2019-03-07 22:31:54 +01:00
f0eeb3d9b4
using naming convention of numpy
2019-03-07 22:22:49 +01:00
9e05b2fcf0
using new name
2019-03-07 22:20:38 +01:00
b03208bc69
unused function
2019-03-07 22:19:08 +01:00
3b8b83fbd9
FLOAT is not defined anymore
2019-03-07 22:18:29 +01:00
a80b57c96b
forgotten during removal of vacancy/porosity/hydrogen
2019-03-07 20:51:14 +01:00
215598ade9
consistent formatting: always indent by 2 spaces
2019-03-07 20:39:33 +01:00
81b971374b
no need to use pInt
2019-03-07 19:34:27 +01:00
98843587e5
Merge branch 'FWBW-default-2' into development
2019-03-07 18:37:58 +01:00
d17c1a6d17
comment was wrong
2019-03-07 18:37:22 +01:00
7a083c4098
[skip ci] more general names and procedure
2019-03-07 11:02:27 +01:00
4ee484b6e7
correct scaling for fluctuations
2019-03-07 07:14:45 +01:00
21bbba1575
cleaning
2019-03-07 07:09:00 +01:00
ae3de821b4
bugfix: synchronizatopm of dPdF_min and dPdF_max was not correct
...
-before: using componenwise min/max among different processors
-now: identify the processor that holds the minimum/maximum of the
norm
2019-03-07 07:01:09 +01:00
ccb62da24a
kind-ID does not need to coincide with the number of bytes
2019-03-06 16:33:39 +01:00
a965c46025
improved functions for floating point comparison
...
- less stric tolerance for comparison to zero
- better readable
- avoid "merge" on optional arguments (not safe)
- "equal" and "notEqual" are now symmetric (assignment of <= and < is
arbitrary)
2019-03-06 15:57:42 +01:00
51f8b1961f
simplify integer precision handling
...
essentially, it should be ok to always use the default integer (which is
32 bit unless using MSC.Marc) and use 64 bit integer only for special cases where an overflow
could happen
2019-03-06 15:52:52 +01:00
05eb80d38c
pLongInt was not used
2019-03-06 15:49:31 +01:00
c9e7311b42
no need to use pInt here
2019-03-06 15:47:48 +01:00
977f61452b
compiler-independent defintion of real and integer kinds
...
real(8) does not neccessarily mean a real with 8 byte (but for gfortran
and ifort it does)
2019-03-06 15:25:47 +01:00
19da2b911d
flux subroutine for Abaqus
...
related comments
2019-02-27 09:23:05 +01:00
b7ee4318b7
copy and paste error
2019-02-27 07:22:59 +01:00
6e9b745ca1
shorterned line to avoid compile time truncation warning
2019-02-26 21:22:14 -05:00
ff5ac56cfb
shortened too long lines
2019-02-26 15:31:47 -05:00
cfb2770b93
merged and added correction to FreeSurface.config example
2019-02-26 13:56:49 -05:00
cb9543dff7
more elaborate debug labelling
2019-02-26 13:47:46 -05:00
56e2c1264b
Merge branch 'development' into New-Thermal
2019-02-26 07:54:45 +01:00
6fab99bca5
Merge branch 'development' of magit1.mpie.de:damask/DAMASK into development
2019-02-25 20:10:38 +01:00
d83847446d
Merge branch '32_NewStyleNonlocal-4' into development
2019-02-25 20:06:20 +01:00
7115382729
not used anymore
2019-02-24 10:08:09 +01:00
7903e2b65f
dependencies got mixed up
2019-02-23 11:31:53 +01:00
93ae5cbd07
Merge remote-tracking branch 'origin/development' into 10-consistent-orientation-conversions-3
2019-02-22 23:05:36 +01:00
b1bb68d523
cleaning
2019-02-22 21:07:00 +01:00
ad0ed4fdec
bugfix: wrong state was allocated
2019-02-22 21:06:37 +01:00
194824fd0f
WIP: cleaned
...
no file reading
getting rid of a number of obsolete dependencies
2019-02-22 20:37:41 +01:00
e7268ce109
simpler structure:
...
- do not read file
- use function for allocation
- do not constantly convert (3,3) <-> (6)
2019-02-22 15:37:42 +01:00
af4ea76006
using central allocation facilities
2019-02-22 15:21:48 +01:00
aa2bd4fc4c
Merge branch 'development' into New-Thermal
2019-02-22 10:17:34 +01:00
db9016d146
avoid repeated loops
2019-02-22 10:02:43 +01:00
4d45038358
better readable
2019-02-22 09:21:04 +01:00
5e369aa220
avoid use of new variables in deprecated code
2019-02-22 08:32:12 +01:00
beb73c7882
not needed
2019-02-22 07:37:08 +01:00
da8a1d5973
leaner interface
2019-02-21 21:32:22 +01:00
6938864c4b
pointers allow easier access to state variables
2019-02-21 20:37:49 +01:00
d686384d17
let lattice.f90 do the job
2019-02-21 19:18:06 +01:00
21d0ef2fb5
use microstructure/dependent state
...
introduced only partly, otherwise the uncommon calling sequence in nonlocal leads
to a change in behavior
2019-02-21 05:55:03 +01:00
cb2d2b02dc
re-ordered and cleaned
2019-02-21 00:24:35 +01:00
3fa699ad22
indices were mixed up
2019-02-20 20:17:55 +01:00
2d51c0595b
don't parse material.config any more
2019-02-20 19:03:20 +01:00
6f135ea632
no random-multiplication anymore
...
from our current understanding, the implementation of random nucleation
was strongly dependent on the numerical method and the time stepping
2019-02-20 17:58:11 +01:00
871ba90654
initialization can be done internally
2019-02-20 17:50:26 +01:00
eb394b3139
same name in all models
2019-02-20 14:54:26 +01:00
838faca819
using structure for output
...
avoids waste of memory in case of multiple instances
avoids explicit dependence on ip and el
2019-02-20 13:32:08 +01:00
e6e019e48a
transition to param structure
2019-02-20 09:13:50 +01:00
d29b37f517
provide slip system components as functions
2019-02-20 07:53:34 +01:00
a896ed91f8
simplified/not needed
2019-02-20 07:33:19 +01:00
d0b0e3be3b
simplified
2019-02-20 00:41:44 +01:00
649750a1c9
let lattice to the work
2019-02-19 23:55:59 +01:00
e8ac2d0d97
limiting inter-module dependencies
2019-02-19 10:47:12 +01:00
41899f6d33
using more parameters from smart structure
2019-02-19 10:31:14 +01:00
6bcd4a77d2
complex pointer structure for state
2019-02-19 09:43:48 +01:00
1a5711e246
using more parameters from parameter structure
2019-02-18 22:55:31 +01:00
ae9d8e4e8d
cleaning
2019-02-18 10:28:08 +01:00
435dce220c
move stress conversion one level up
...
should be totally avoided
2019-02-18 07:24:56 +01:00
8a30441a52
Merge branch 'development' into 32_NewStyleNonlocal-3
2019-02-18 07:14:11 +01:00
690fef6f06
avoid publicly avaialbe data, rather provide setters and getters
2019-02-17 20:38:57 +01:00
44e41465d0
use functions from lattice to calculate slip systems
...
don't rely on internal coding for collinear systems
2019-02-17 17:56:01 +01:00
c4b3ac3afb
slip system definition for bcc still needed
2019-02-17 17:04:26 +01:00
d3e6430b94
only used internally
2019-02-17 14:30:58 +01:00
553b1c7743
stress tensor was accidentally still converted
2019-02-17 13:16:00 +01:00
7ad866b90f
not needed any more
2019-02-17 12:16:12 +01:00
cf32e7d1f5
use parameter structure and avoid conversion 33<->6
2019-02-17 12:15:46 +01:00
530f4f2804
Merge branch 'New-Damage' into 'development'
...
New damage
See merge request damask/DAMASK!59
2019-02-17 10:09:46 +01:00
db9d5c898a
[skip ci] typo
2019-02-17 10:08:02 +01:00
0f319e2cf6
fixed state size and output size
2019-02-16 23:18:53 +01:00
c7abe55944
was not needed
2019-02-16 22:09:06 +01:00
2584f85760
parameters are stored in parameter structure
2019-02-16 18:38:13 +01:00
0ba8ebff1e
Merge remote-tracking branch 'origin/development' into 32_NewStyleNonlocal-3
2019-02-16 18:12:38 +01:00
63e2ea7d8f
was not use (anymore)
2019-02-16 12:49:28 +01:00
77d60be127
avoid superfluous reporting
2019-02-16 11:30:56 +01:00
efe9823e62
clearer logic for preprocessor statements
2019-02-16 10:43:02 +01:00
af83427e8c
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-02-16 10:25:42 +01:00
61032b5fd8
wrong jump position
...
probably a copy and paste error
2019-02-16 10:24:12 +01:00
9a3921ea84
ifdef statements grouped together
...
unless they belong to a group of functions, like opening files or
interpreting lines
2019-02-16 10:20:53 +01:00
0fd5476883
doxygen interprets comment as doc string
2019-02-16 06:42:08 +01:00
afdaac47af
avoid disturbing reporting
2019-02-15 22:54:38 +01:00
d78bf18483
simplified output
2019-02-15 07:25:25 +01:00
1567b0ee94
was not used
2019-02-15 07:03:52 +01:00
bc0bc06aea
polishing
2019-02-13 10:16:06 +01:00
5b0cdf294d
delta state is needed
...
not sure if the offset handling is correct
2019-02-13 10:11:25 +01:00
dc6f18c3f8
cleaning
2019-02-13 10:03:28 +01:00
d366651873
file reading not required anymore
2019-02-13 09:57:12 +01:00
47a9d88a15
read vector-parameters
2019-02-13 09:19:37 +01:00
3ca34c8f80
simplified
2019-02-13 09:09:30 +01:00
a421525d15
preparing storage of output parameters
2019-02-13 08:06:22 +01:00
f34c10a477
sdot_0 already available as parameter
2019-02-13 07:36:36 +01:00
b3e705e628
polishing, fixed typo
2019-02-13 07:34:16 +01:00
aa8d218ce7
was never used
2019-02-13 07:28:28 +01:00
6a0d739d48
use parameters from param structure
2019-02-13 07:24:48 +01:00
61baa66c38
avoid code duplication
2019-02-13 07:22:37 +01:00
9574dfae2d
avoiding repeated reading of material.config
2019-02-13 07:04:13 +01:00
55cef533f1
conversion 3x3-matrix <-> 6-vector not helpful
2019-02-13 00:00:07 +01:00
01fe7a9731
Merge branch 'development' into New-Damage
2019-02-12 23:37:39 +01:00
c9fc7ea982
cleaning
...
trying to find logic with less dependencies on the various
mappings
2019-02-12 23:35:22 +01:00
69d53ed869
determining output size was overly complicated
...
general cleaning
2019-02-12 23:20:24 +01:00
be7f740e65
Merge branch 'development' into New-Thermal
2019-02-12 22:52:21 +01:00
1a471bcd8a
signal handling implemented
...
allows to trigger action in running simulation, i.e. writing restart or results
2019-02-11 18:46:14 +01:00
87f3e3f621
more flexible and user friendly
2019-02-11 10:08:34 +01:00
af28e9cdd9
not needed anymore
2019-02-09 17:23:56 +01:00
c4eef520fc
initialize all variables
2019-02-09 17:21:11 +01:00
09859f1b12
wrong variable rename (was forgotten)
2019-02-09 16:53:05 +01:00
de26e41684
some first steps to support debugging with the PGI compiler
...
norm2 and sum for initialization are not supported yet, need fixes
2019-02-09 15:02:07 +00:00
8167f09ec6
using functions as far as possible
2019-02-09 12:01:31 +01:00
5d9c3fcf27
finalize for write
2019-02-09 09:44:41 +01:00
73749dd788
merged also finalization
2019-02-09 09:38:49 +01:00
d934f2b141
also modularize write
2019-02-09 09:03:31 +01:00
c668260c37
avoiding code duplication
2019-02-09 08:05:29 +01:00
36662f8419
more generic formulation (works for all dimensions)
2019-02-09 07:50:33 +01:00
542ab946cc
[skip ci] not needed
2019-02-04 19:05:02 +01:00
3f61c97ded
don't support non-DAMASK materials
2019-02-04 18:58:36 +01:00
453f4556e5
bracket was missing
2019-02-04 00:12:27 +01:00
5320803842
bugfix: valid range for unit quaternion range is [-1,+1]
2019-02-04 00:06:38 +01:00
a57aa7985a
wrong name
2019-02-03 18:11:16 +01:00
59dd9b16e1
cleaning
2019-02-03 16:40:15 +01:00
b0b1ea3b84
input argument not needed any more
2019-02-03 14:23:32 +01:00
ec23fca057
it's a property of the element, not of the mesh
2019-02-03 14:22:06 +01:00
2d0c74d7d9
implicit dependencies made explicit
2019-02-03 14:22:06 +01:00
2aba6faf40
cleaning and making dependencies clear
2019-02-03 14:22:06 +01:00
91992debf2
Marc now works also with the module
...
reason, why it did NOT work earlier still not clear
2019-02-03 13:30:04 +01:00
b9f93d5460
is now a subfunction
2019-02-03 11:22:23 +01:00
d605adc92e
avoid the use of global variables to make dependencies clear
2019-02-03 11:12:23 +01:00
f45ba0ff5b
functions specific for MSC.Marc and/or Abaqus
...
these functions are very specific for the input files and might be
better located in the respective mesh module
2019-02-03 08:27:20 +01:00
2c7553653b
only used by MSC.Marc
2019-02-03 08:11:19 +01:00
40ad1aef2f
was not used
2019-02-03 08:07:58 +01:00
a92937a7e3
grid does reading in of geometry independently
2019-02-03 08:06:53 +01:00
1eb30f3ae7
re-ordered according to calling sequence
2019-02-02 20:49:15 +01:00
bb135463c4
using data from theMesh instead of local variables
2019-02-02 20:45:19 +01:00
35c37ef9dc
forgotten format specifier
2019-02-02 17:39:31 +01:00
abedb5c3db
ordered according to calling sequence
2019-02-02 17:24:18 +01:00
16cb9ebed9
no need to read homogenization info extra
...
but currently, it is not very elegant
2019-02-02 17:24:18 +01:00
d51a379376
avoid jump labels
2019-02-02 17:24:18 +01:00
819ec40b44
clearer order:
...
1) parse file
2) set up element
3) set up mesh
2019-02-02 17:24:18 +01:00
07cca77fce
left over jump marks
2019-02-02 17:19:12 +01:00
3edbfc1cb5
bugfix:
...
infinite loop for geom file without new line at end
also, a lot of cleaning
2019-02-02 15:10:35 +01:00
933136ec1e
nNodes form element is used already
2019-02-02 13:10:21 +01:00
b514bf78a5
avoiding duplicated variables
2019-02-02 12:31:07 +01:00
4f2a3d7f55
unused variables
2019-02-02 12:23:53 +01:00
dcd16dda70
variables from mesh object
2019-02-02 12:15:05 +01:00
326cbd0398
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-02-02 11:52:06 +01:00
8962635136
use new elem/mesh variables
2019-02-02 11:50:07 +01:00
94a24e45ee
bugfixes:
...
theMesh%Nelems need to be set (using an intermediate function until a
routine does that)
spectral.geom file can have "N+n to N" (backwards counting)
2019-02-02 11:46:38 +01:00
3a5a50cb03
use variables from theMesh
2019-02-02 10:53:55 +01:00
7a8d98d135
using theMesh (object oriented mesh description)
2019-02-02 10:35:10 +01:00
f0b5b9fd59
unused variable
2019-02-02 10:34:38 +01:00
e17278a926
using new mesh structure (initial test)
2019-02-02 10:11:18 +01:00
9975048f29
better avoid jump marks: Abaqus, Part 2
2019-02-02 09:56:11 +01:00
5810dce618
better avoid jump marks
2019-02-02 09:29:58 +01:00
4a28284058
only parse geom file once
2019-02-02 09:18:01 +01:00
3d750e7933
overwriting of init did not work
2019-02-01 21:56:38 +01:00
9a4e9e62b6
using new rotation class
2019-02-01 20:28:51 +01:00
08009079ff
avoiding numerical errors (if quaternion norm is > 1.)
...
use consistently "self" instead of "this"
function for misorientation
2019-02-01 20:27:29 +01:00
feb87c7db8
same name as in the python module
2019-02-01 19:09:17 +01:00
407f94082f
no need for orientation class at the moment
...
implement only if we need symmetry aware operations
2019-02-01 16:52:42 +01:00
8e0556fe3e
[skip ci] nicer reporting
2019-02-01 12:43:14 +01:00
614a8d694c
re-implement mesh reporting later on in mesh_base
2019-02-01 12:28:18 +01:00
5f8b110f63
initialize mesh and element
2019-02-01 12:24:23 +01:00
b87a09a466
not needed
2019-02-01 11:22:06 +01:00
06f67ce500
orientations module was not compiled but is needed now
2019-02-01 10:24:10 +01:00
11a509970b
some comments
2019-02-01 10:17:20 +01:00
9d25d677e6
using new orientation class
...
not sure if transpose is needed for initialization
2019-02-01 10:11:46 +01:00
53a95ea84f
cleaned and documented
2019-02-01 10:01:54 +01:00
17a682e883
P/epsijk parameter has nothing to do with precision
2019-02-01 08:53:57 +01:00
8a2689da0a
documentation was for a lot of things that are not in here
...
setting constants without truncation
2019-02-01 08:52:38 +01:00
a260bd2d2b
Merge branch 'development' into 10-consistent-orientation-conversions
2019-02-01 07:33:52 +01:00
721af0a9a9
plastic_nonlocal still has confusing state handling
2019-02-01 07:06:19 +01:00
b9c834f86a
missing use from IO
2019-01-31 17:01:26 +01:00
ccb320fa6e
central function for less depencies
2019-01-31 14:00:26 +01:00
a3e61c82dc
Merge branch 'development' into 32_NewStyleNonlocal-3
2019-01-31 12:42:35 +01:00
bcd9908a88
all variables/functions were not used
2019-01-31 12:23:23 +01:00
fbd8912237
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-01-31 11:41:45 +01:00
6b66563be7
Merge branch '46-simplification-of-crystallite-f90-NEW5' into development
2019-01-31 11:40:23 +01:00
615b166992
removed unused stuff
2019-01-31 11:39:28 +01:00
beb0ca01eb
define functions where needed
...
only use solver specific element names
2019-01-31 11:29:56 +01:00
aabd98bee9
no need to repeat the same code
2019-01-31 09:14:02 +01:00
cbeb3dcff0
use the same formulation for convergence every where
2019-01-31 09:12:44 +01:00
5eaeb37ea4
just polishing
2019-01-31 06:04:49 +01:00
3b13a1af63
calculated convergence criteria wrongly
2019-01-30 17:04:58 +01:00
e1c2747393
logic error for nonlocal
2019-01-30 16:06:14 +01:00
fe88e5bf9c
[skip ci] cleaning
2019-01-30 14:52:12 +01:00
1d88057ce4
avoid superflous variables
2019-01-30 13:24:35 +01:00
64b89484d2
logic better visible
2019-01-30 13:19:05 +01:00
39e766bba0
improved readability
2019-01-30 12:36:02 +01:00
3dd21177a0
no need to store relative residual pointwise
2019-01-30 11:28:41 +01:00
fd069a96cd
unifying name
2019-01-30 10:51:24 +01:00
4ec0fd70a2
only one variable needed
2019-01-30 10:48:59 +01:00
0876787e3c
avoid loops
2019-01-30 10:46:53 +01:00
72c4f2b25f
same names everywhere if possible
2019-01-30 10:37:18 +01:00
0745d7ebc2
convergence flag is set only later
2019-01-30 10:33:57 +01:00
46be595ea8
no need to store relative residual for all points
2019-01-30 10:28:47 +01:00
31906e3ebd
no need for 2 loops
2019-01-30 09:21:50 +01:00
df6ec59f76
use "s" for source
2019-01-30 09:21:50 +01:00
ca7c105f36
only one loop needed
2019-01-30 09:21:50 +01:00
462b1b7c18
sorted according to importance
2019-01-30 06:47:36 +01:00
5908e3fd34
wrong tolerance selection
2019-01-30 06:44:26 +01:00
370b23d5da
Merge branch '46-simplification-of-crystallite-f90-NEW5' into development
2019-01-30 06:29:41 +01:00
77f1f45c23
just figured out that RK4 integrator is totally broken
...
readable code helps ;)
2019-01-30 00:17:04 +01:00
a09036ff48
on-the-fly initialization
2019-01-30 00:11:10 +01:00
1a66f976b7
common variable name
2019-01-30 00:01:40 +01:00
6a3dac1df2
still improving readability
2019-01-29 23:45:41 +01:00
bdd193fbd7
now readable (kind of)
2019-01-29 23:31:26 +01:00
eade54a68f
consistent variable names
2019-01-29 23:04:50 +01:00
1408d66c0c
s is used for source
2019-01-29 23:02:59 +01:00
0be05b3ee1
one variable is enough
2019-01-29 22:46:21 +01:00
b4afc303be
clearer logic
2019-01-29 22:40:18 +01:00
73f39136c4
taking over from old branch
2019-01-29 22:19:38 +01:00
38d8e429ff
layout adjustments
2019-01-29 22:07:31 +01:00
27b034eb76
fixed bug in recursiveRead that failed to properly {include} in the last line of a file
2019-01-29 12:32:11 -05:00
066c598203
wrong dot product in state damper
2019-01-29 10:52:00 +01:00
34f3c15552
no need for temp variables
2019-01-29 07:24:06 +01:00
41832fb554
no need for two variables
...
only resulted in confusing code
2019-01-29 07:24:06 +01:00
a24d8b86bf
convergence of plastic state can be done earlier
2019-01-29 07:24:06 +01:00
4a69032637
better readable
2019-01-29 07:24:06 +01:00
1e4da6fbdb
nonlocal convergence check in function
2019-01-29 07:24:06 +01:00
3fdf8e19bb
further simplifications
2019-01-29 07:24:06 +01:00
4967ac0132
need to check for significant stress only once
2019-01-29 07:22:56 +01:00
9892da717a
bugfix: missing initialization
2019-01-29 07:06:16 +01:00
c10922de2b
vector notation easier to read
2019-01-29 07:06:01 +01:00
a46b4a52a8
sanity checks in more sensible order
2019-01-29 06:41:27 +01:00
918860ab38
easier to store atomic volume instead of scaling factor
2019-01-29 06:14:58 +01:00
ee586dfa0c
avoid code duplication
2019-01-29 00:46:57 +01:00
2cf44f4060
shorter
2019-01-29 00:39:44 +01:00
2f9a571b96
no need for 2 variables
2019-01-29 00:38:18 +01:00
b62232022b
polishing
2019-01-29 00:27:58 +01:00
Martin Diehl