a07c738778
polished a little bit
2014-02-08 10:48:09 +00:00
8741f2368d
first (not too complicated) workaround for the shortcomings of the new intel compiler. still crashes, but later ;)
2014-02-06 17:48:01 +00:00
bc4cc20c55
slightly polished makefile and numerics, recompile fftw with icc; still not running with ifort 14.01
2014-02-06 10:41:34 +00:00
1ea48bb8ff
added accumulatedshear as output for twin and slip
2014-02-05 15:26:22 +00:00
83e4bc3247
updated test for restart, now also checking if number of increments is the same
...
fixed output of test class
fixed small bug? in asciitable.py, @philip: please check
2014-02-03 19:30:28 +00:00
1444739d60
prevent ifort from complaining too loud about old syntax in openmpi files
2014-02-03 16:47:16 +00:00
caca65148d
fixed bug in restart: stiffness values that were read from file used to be overwritten by "utilities_constitutiveResponse"
...
Still not fixed in polarization and AL solver !!!
2014-02-03 15:57:04 +00:00
b9b87a785c
added crystallite_F to debugging output
2014-02-03 13:19:49 +00:00
c5b31b373c
no longer needed
2014-02-03 10:38:59 +00:00
aa4eee2b50
fixed bug in math_rotate_forward3333
2014-01-31 14:28:20 +00:00
c7e59821d1
fixed compilation bug when using IMKL single core
2014-01-30 15:38:10 +00:00
986591682c
remove equals sign in rpath definition to work with mac, changed linker options in compile_CoreModule to work with linux again, please let me know if mac doesn't work anymore (it should)
2014-01-30 13:07:44 +00:00
9e5a2d8e10
fixed runpath
2014-01-29 19:52:53 +00:00
f82e5ec26e
some small changes on the installation scripts, IMKL now works with gfortran, more verbosity and more sanity checks
2014-01-29 12:20:56 +00:00
ee99216edc
polishing compile_CoreModule, bug fix for Makefile
2014-01-28 07:34:13 +00:00
02441bef0f
introduced rpath to tell executable where libraries are located
2014-01-27 14:10:49 +00:00
b9e55b4495
moved setting of CPFEM forwarding flag to the forwarding subroutine
2014-01-27 11:05:36 +00:00
656e3cc6ca
some more small changes, including bug fix in configure + relative linking in Makefile for spectral solver
2014-01-27 10:12:29 +00:00
4850e5987d
remove LD_LIBRARY_PATH ( http://linuxmafia.com/faq/Admin/ld-lib-path.html ) and fixed wrong named xxx_ROOT
2014-01-25 00:15:04 +00:00
d66b41c686
fixed installation, will test now
2014-01-24 12:30:27 +00:00
c99ca8b0ee
fixed magnesium parameters
2014-01-23 13:33:09 +00:00
e6d88e4458
prevent twin volume fraction from going above 1.0
2014-01-22 15:47:49 +00:00
391d83fa2b
moved rate sensitivity block to where it belongs to, namely the analytic jacobian calculation
2014-01-22 15:34:10 +00:00
4b7890f133
fixed wrong indices in analytic jacobian calculation following christoph's changes. convergence is restored at least for the spectral solver
2014-01-22 10:16:55 +00:00
3dfdbaff5b
Fixed wrong indices in tangents dT_dFe and dFe_dLp, which however luckily did not have any effect in the perturbed stiffness since they were transposed such that the double contraction of both remained unchanged.
...
In contrast, the analytical jacobian will probably be affected by this change!
@Pratheek: Can you check with me how this can be fixed?
2014-01-22 08:38:13 +00:00
c10d0d15cb
crystallite_integrateStateFPI: convergence check always ran about all e,i,g; now checking only those specified in FEsolving_execElem, FEsolving_execIP
2014-01-21 18:45:41 +00:00
ff648492c1
perturbation calculation in crystallite_stressAndItsTangent: only backup and restore those chunks of crystallite_Fe, _Fp etc that are actually used in order to avoid pointless data copying in non ping pong mode
...
(missed some part in last commit)
2014-01-21 18:28:21 +00:00
029826d84f
perturbation calculation in crystallite_stressAndItsTangent: only backup and restore those chunks of crystallite_Fe, _Fp etc that are actually used in order to avoid pointless data copying in non ping pong mode
2014-01-21 16:35:12 +00:00
351aa6ba29
setting todo and converged flag only for those e,i,g that are to be executed (FE_elemExec etc)
...
used to spoil convergence checking in non ping pong mode and lead to slow performance
2014-01-21 16:09:00 +00:00
74cbfb6d48
added few comments
2014-01-17 01:38:35 +00:00
77cba87bf3
in crystallite_integrateStress: pass full 2nd PK stress to LpAndItsTangent instead of only the deviatoric part; otherwise constitutive laws that depend on the hydrostatic pressure do not work; constitutive laws that require a deviatoric stress need to calculate it internally (as is e.g. already done in the J2 model)
2014-01-16 10:36:40 +00:00
a011b0a4a2
corrected tangent of plastic velocity gradient dLp_dT for slip (twin volume fraction was missing)
2014-01-16 09:53:45 +00:00
9223cf52b4
corrected non-Schmid effect: used to calculate resolvedstress based on Mandel notation which can be incorrect for nonsymmetric non-Schmid tensors
2014-01-16 09:50:40 +00:00
b24dd62431
corrected tangent of plastic velocity gradient dLp_dT for slip (twin volume fraction was missing)
2014-01-16 09:29:21 +00:00
563c4ac94b
corrected tangent of plastic velocity gradient dLp_dT, which improves convergence a lot
2014-01-16 09:18:26 +00:00
278f854e41
introduced functionality to get output results by point from the HDF5 file
2014-01-15 22:17:32 +00:00
3fffb2ae3e
added parameter set for Magensium
2014-01-15 12:29:44 +00:00
9f3a17b1b6
fixed bug in hexagonal slip system definition
2014-01-15 12:08:46 +00:00
98f677916c
fixed crash in RtoEuler for PHI=180°
2014-01-15 08:32:43 +00:00
449c66c70f
did some testing...
2014-01-14 19:32:55 +00:00
01c8c434f7
finished work on the new installation scheme (if no bugs are found ;))
2014-01-14 19:03:41 +00:00
aab0208c65
more modifications, only configure needs modifications
2014-01-12 17:29:00 +00:00
00eb9b2cf6
forgot Makefile
2014-01-11 17:18:59 +00:00
a1927b60a7
allow flux between neighboring material points if one of both got a velocity of zero
2014-01-08 16:35:10 +00:00
b41593f279
blocked density does no longer contribute to dislocation flux; used to generate source term for mobile density if burgers vector had any non-zero component perpendicular to blocking boundary.
2014-01-08 16:31:50 +00:00
629295242f
added two new outputs: "rho_dot_flux_mobile" and "rho_dot_sgl_mobile"
...
corrected outputs of dislocation density rates: take into account that blocked dislocation density is a signed quantity
2014-01-07 15:55:28 +00:00
79307de6a7
added some code parts for HDF5 in Fortran
2013-12-30 10:06:01 +00:00
5b4b132176
introduced preprocessor statements in mesh to hide unneeded variables as a preparation for HDF5
2013-12-27 20:03:28 +00:00
831e905b16
added missing lp output to crystallite
2013-12-20 11:13:12 +00:00
de3fc70a02
moved restart writing to the forwarding routine
2013-12-20 10:49:14 +00:00
98d5a99a43
reverted unwanted changes to Makefile (configure)
2013-12-20 10:31:33 +00:00
d595f59f0e
improved sanity checks, mainly for RGC
2013-12-20 08:36:15 +00:00
af075aaa9d
found bug (array index out of bounds), Philip/Franz please check if correct (Gfortran was complaining)
2013-12-20 08:33:46 +00:00
543639bb8f
added support for Marc/Mentat2013.1
2013-12-19 13:37:35 +00:00
61c6839723
fixed over-sensitive error in homogeniztion and ifort option in makefile
2013-12-19 08:49:47 +00:00
6f6bd86078
fixed bug in heat generation and analytic jacobian calculations
2013-12-18 10:19:48 +00:00
f3ea92f50c
fixed error in previous commit
2013-12-18 09:38:44 +00:00
61981617d7
separated forwarding and solution subroutines for better control at the load step looping level
2013-12-18 09:35:05 +00:00
ff6211b78c
rolled back phase field changes
2013-12-18 09:09:32 +00:00
6fa9ed8f48
homogenization: added enums and sourced allocation for RGC, some higher verbosity for isostrain
2013-12-18 07:28:01 +00:00
c4a592867f
updated to PETSc 3.4.3, will not compile on all workstations except for maws0X
2013-12-17 15:37:14 +00:00
676e621af2
new version of Lib_VTK_IO
2013-12-17 13:24:34 +00:00
7b9d76cdcc
added missing allocation of outputID caused crashing
2013-12-17 08:02:21 +00:00
ba89df7784
continued with sourced allocation and EOL improvements
2013-12-16 11:58:03 +00:00
118dff9f23
fixed wrong initialized symmetry value
2013-12-16 10:56:56 +00:00
d5bdcf5a6d
some small improvements, still something wrong, probably in crystallite.f90
2013-12-13 14:14:17 +00:00
84d51d743c
fixed small issues, ATTENTION: Still a bug introduced with rev. 2783 not fixed
2013-12-13 13:19:17 +00:00
7ba3cc0ab7
removed symlink to marc 2010
2013-12-13 10:04:25 +00:00
acad3d4a33
using sourced allocation
2013-12-12 23:03:37 +00:00
da337962af
fixed bug for Abaqus input parsing
2013-12-12 22:29:40 +00:00
65ae979920
indroduced sourced allocation, enums where applicable (some parts still missing). fixed bug when having recursive file input
2013-12-12 17:09:59 +00:00
9b9f4dd624
adapted changes from rev 2776 for constitutive_nonlocal: improved usage of "enum", fixed bug in file reading, usage of "source" specifier for "allocate"
2013-12-12 10:16:50 +00:00
dd77690a68
fixed bug introduced in rev2777: renamed all remaining occurrences of variable "ncomponents" to "nconstituents"
2013-12-12 10:06:39 +00:00
102712d91f
added enum for dislotwin output, fixed bug when using recursive file input function
2013-12-11 23:42:33 +00:00
95d6430b09
improved on enums (introduced them for output in j2), fixed wrong recursion depth bug in IO, fixed a bug in reading in for none, j2, phenopowerlaw
2013-12-11 22:03:09 +00:00
7885ebaf8f
added 'reset' flag for recursive function IO_read, need to reset stack when stopping exectution (will be used by constitutive and homogenization)
2013-12-11 16:49:20 +00:00
efa7a6dae2
added example material.config again
2013-12-05 15:11:30 +00:00
bf6e749abd
adopted deployMe.sh to new svn server
...
editorial changes in LICENSE and CPFEM.f90
2013-12-05 14:31:28 +00:00
61ebfb4c85
removed obsolete output 'boundarylayer' from material.config
2013-11-29 12:30:06 +00:00
b0695c0904
enumerators for case switch of outputs as already used in phenopowerlaw
...
removed obsolete output 'boundarylayer'
2013-11-29 12:29:47 +00:00
f56cdafccb
polishing indentation levels
2013-11-29 12:25:36 +00:00
2d624d022f
fixed small bug in detecting the lattice structure. only first 3 letters count (e.g. 'ort' and 'orthography' will give the orthorombic lattice type)
2013-11-28 08:56:02 +00:00
345e5cd47c
split up material.config and added a small helper script to create wiki content from all material.configS
...
(Work done by Luv, just his TortoiseSVN is not yet installed)
2013-11-27 17:49:34 +00:00
0bc99a9622
change latticeName to latticeID
2013-11-27 16:20:27 +00:00
6c2ab1f1f8
added ID (integer, enum) case switching for phenopowerlaw and isostrain
2013-11-27 11:39:28 +00:00
080edffd87
file was missing in last commit
2013-11-27 08:05:23 +00:00
2f7efa2055
introduced named constants for homogenization_type, phase_plasticitiy, and phase_elasticity to replace expensive string comparison. Labels for different schemes need to be stored in material.f90 because they are needed when parsing the config file
2013-11-27 08:04:05 +00:00
c9ce8d2c52
some improvements on HDF5 test, polishing math
2013-11-22 10:31:52 +00:00
e8de8f69a8
renaming of "maxNinstance" to be consistent with naming scheme introduced in rev2662
2013-11-21 13:40:14 +00:00
3cc6781eaf
renaming of "instance" and thelike to be consistent with naming scheme introduced in rev2662
2013-11-21 13:35:43 +00:00
883669bd77
in preguess of FPintegrator: resetting of previous dotstates can be done in same loop as collectdotstate
...
polishing: indentation level and capitalization
2013-11-21 10:58:41 +00:00
9083aa53fb
fixed long lines due to makro expansion
2013-11-19 16:06:53 +00:00
9c34c1b871
error reporting for phase fields only if there are active phase fields
2013-11-14 10:36:49 +00:00
f51c600189
convergence check for phase field only if there are active phase fields
2013-11-14 10:32:41 +00:00
3b113f6a62
more errors :)
2013-11-13 19:38:25 +00:00
8444b4116d
corrected error in previous commit
2013-11-13 19:26:36 +00:00
50db944c0c
reworked phase field interface to damask spectral solvers. now specify 'thermal a b c' or 'fracture a b c' to activate either phase field where a b c are the initial value, diffusion coefficient and mobility respectively.
...
Right now only thermal and fracture phase fields implemented and only in the basic petsc solver
2013-11-13 19:21:35 +00:00
724380c624
Coupled phase field implementation for the basic petsc solver. needs clearing up… work in progress
2013-11-12 00:44:23 +00:00
9ac8846e41
compiling with hdf5 is now working for DAMASK (if HDF5=ON) and for playground example in private
2013-11-07 12:52:36 +00:00
c857381881
added "-d", "--directory" as possible cmd switches for working directory.
...
fixed (sometimes?) non-working check for valid working directory path.
2013-10-24 18:56:56 +00:00
ea980f428e
fixed long line coming from PETSc macro expansion
2013-10-23 17:52:58 +00:00
57cf472982
Improved convergence checking when using newton solver (does not oversolve the problem like before)
2013-10-23 15:22:12 +00:00
eb0d2b7e24
fixed bug that (sometimes, always?) prevented reading in of debug.config, when variable 'line' was still '#EOF#' from former IO_read...
2013-10-23 11:23:41 +00:00
bdafc6f1b8
condensed error msg numbering,
...
introduced new error for "microstructure without any constituent"
2013-10-23 11:21:48 +00:00
205eb66ba8
bugfix for last commit, too many variables declared as private
2013-10-23 10:29:38 +00:00
96b03841e8
redefined macro for intel compiler, should work with windows (but Nicolo had some problems)
...
made configure verbose
2013-10-23 08:38:14 +00:00
7b28dedfe3
removed temperature calculation and debugging statements
2013-10-22 15:52:58 +00:00
ea664688f8
introduced dummy temperature calculation.
2013-10-18 20:56:10 +00:00
3ecc8103f0
introduced dummy heat calculation, available as an crystallite output
...
temperature, avgP and avgF are available as homogenization output. move crystallite output of ipcoordinates to homogenization
2013-10-18 18:57:28 +00:00
1c7ed337d7
corrected linebreak in comment
2013-10-17 12:52:46 +00:00
03e26af37b
small bufix, didn't compile
2013-10-16 20:44:04 +00:00
dc95c82d4a
removed temperature integration and corresponding data structures and debugging options
...
temperature is stored in crystallite, but homogeneous on one IP (not an component (grain) quantity and an input value parsed in by the BVP solver.
introduced heat, a component (grain) quantity which is homogenized before returned to the heat transfer solver.
went ahead with removal of dummy functions in homogenization and constitutive, this time mainly reduced function signatures to reflect actually needed quantities.
2013-10-16 13:04:59 +00:00
6a1c40d540
introduced error when element/IP/component(grain) selected for debugging does not exist
2013-10-16 12:38:00 +00:00
0a292d8d8b
fixed final bug in hex twintwin matrix
2013-10-15 22:02:39 +00:00
4d184b1ee4
improved comments
2013-10-14 14:35:41 +00:00
295d0cd28e
removed a bunch of dummy functions (delta state for all constitutive_XXX except nonlocal, microstructure for none, j2 and phenopowerla), additional simplifications for none, averageBurgers is only relevant for RGC
2013-10-14 10:54:45 +00:00
029502c12e
fixed typo causing compilation error
2013-10-14 06:11:50 +00:00
b651f334fe
set useful default values to remove dummy functions in individual homogenization schemes (stateInit, averageTemperature, and updateState (isostrain only))
2013-10-11 16:01:53 +00:00
80cb78c1fd
corrected activation of slipbands; both velocity and resistance have to be non zero
2013-10-11 13:52:00 +00:00
3b5a5ab812
changed error in case of number of found interaction types is less than expected to warning
2013-10-11 09:17:03 +00:00
bb0b35e466
made compilation_info.f90 windows compatible and added abaqus_v6_windows.env as a template for using DAMASK with windows.
...
Deleted old fftw and ACML installation instruction (can be found on damask.mpie.de)
2013-10-10 09:38:31 +00:00
ed47d25adc
remove dotTemperature (returned always 0 anyway) to make it easier to replace it with a heating rate funtction
...
remove potentially dangerous short circuiting in homogenization files
added doxygen comment for nonlocal (giving the functions a name)
fixed wrong definition of maxnchungs introcuded into dislotwin with last commit, causes trouble with hex
2013-10-09 06:12:16 +00:00
82faf74363
added doxygen documentation and unified variable names and some common parts of the code
2013-10-08 16:27:26 +00:00
0a7052a7da
fixed two errors in hexagonal slipslip and twintwin interaction matrix
2013-10-08 13:52:19 +00:00
42cd4eb38f
fixed some e12.6 string formats to avoid compile time warnings
2013-10-08 13:51:36 +00:00
a2169e338f
fixed type-casting problems (mainly with Lib_VTK_IO)
2013-09-26 17:21:46 +00:00
ca2a8d0a03
fixed typos in Abaqus related functions
2013-09-23 09:01:46 +00:00
595c8860a2
renamed myInstance -> matID, myStructure -> structID to be consistent with other constitutive models
2013-09-20 17:03:11 +00:00
ad32aa3ced
fixed calculation of CurlRMS when grid(1)==1
2013-09-20 16:17:25 +00:00
a0f304021f
fixed restarting for Polarisation and AL, updated corresponding test and polished output in python (some statements are screwed up when making them Python3 compatible)
2013-09-20 14:22:37 +00:00
40c399bf2e
fixed bug in last commit and remove one more goto marker
2013-09-19 15:28:55 +00:00
ce926aaf1f
Minor contribution :
...
- add SVN keyword to the material.config file for cp-Ti
- add comments in lattice file
2013-09-19 09:17:09 +00:00
ca0b3b7b81
changed name of some variables to be in accordance with constitutive_none,j2,phenopowerlaw
2013-09-19 07:46:01 +00:00
70c888f6ea
fixed a typo in documentation
2013-09-18 19:54:39 +00:00
56d21286a6
fixed comment on values changed automatically
2013-09-18 14:33:40 +00:00
3eec0ecdcd
introduced #EOF# as module wide parameter in IO.f90
...
renamed read/write binary file to read/write real/int
removed suffix job from readFile functions as the name of the model is needed as an argument
2013-09-18 14:07:55 +00:00
19a353edb4
made error in case of invalid precision more verbose
2013-09-18 13:59:42 +00:00
a8eb6a985e
- Addition of an example of a material.config file for hcp material (cp-Ti).
...
- New Error Message #214 when elastic constants are not correctly defined.
- Error message when the c/a ratio for hcp is higher than 2 (no physical sense).
2013-09-17 12:20:50 +00:00
cb16b30409
set output order of spectral parameters to more reasonable one
2013-09-17 09:19:16 +00:00
3bf0ed84c8
some comments and minor improvements.
...
removed tol_gravityNodePos from prec because it's not used
tol_math_check is now used by spectral driver to check rotation
2013-09-14 10:59:35 +00:00
5f973a21c0
require all hardening coefficients/ non schmid coefficients to be specified in material.config, do not silently ignore any
...
warning message now more meaningful (?) when using less than maximum number of slip families
2013-09-12 14:47:09 +00:00
ddfc40afe6
improve restart test, deletion of results was messed up. fixed restart for BasicPETSc, AL and Polarization currently don't run when restarting
2013-09-05 12:07:58 +00:00
4ebf46d2ac
nonSchmidProjection was reset to zero each time during instance loop in init, so entries from previous instances got lost; fixed that
2013-08-23 13:53:03 +00:00
1f77594ca0
dislocation velocity was not correctly stored to state in last version
2013-08-21 13:54:36 +00:00
4f8664baa3
in kinetics: non schmid stresses only influence peierls mechanism, but not solid solution hardening; as a result the derivative of the velocity with respect to the resolved stress has to be split into a Schmid and a non-Schmid part
2013-08-21 12:21:52 +00:00
ec377a6e8e
removed obsolete "dead zone" scaling
2013-08-21 08:39:43 +00:00
f706ba3ff9
rearranged arguments of "constitutive_nonlocal_kinetics", got "tauTreshold" as argument, not complete state
...
don't call "constitutive_nonlocal_kinetics" twice for edges in case of nonSchmid behavior, but just call once and copy results from positive to negative edges
2013-08-21 07:55:34 +00:00
277972edbd
"dv_dtau" argument in "constitutive_nonlocal_kinetics" not optional anymore
...
renamed "screwStressProjection" to "nonSchmidProjection"
2013-08-21 07:23:02 +00:00
39c05e0d9e
for bcc: exchanged 2nd and third hardening coefficient to be consistent with fcc; now 2nd is coplanar and 3rd is collinear; added newer reference concerning the bcc hardening coefficients
2013-08-14 11:47:03 +00:00
e909b825cc
correction of hardening coefficients also enabled for bcc
...
for fcc: now applied to all hardening coefficients, not only hirth, lomer, and glissile
2013-08-14 11:44:30 +00:00
b8d5f3124f
added citation on phenopowerlaw aluminum parameters
2013-08-09 21:24:42 +00:00
e62b760a6e
added F_avg = F_aim in boundary condition convergence check
2013-08-09 16:25:13 +00:00
822fa3d97c
forgotten line continuation
2013-08-09 04:16:16 +00:00
c93373a4ac
removed long lines
2013-08-08 19:33:21 +00:00
3bb5a5e7b5
line too long in DAMASK_spectral_solverPolarisation.f90, reordered curl calculation for clearer look, fixed test for Marc 2013
2013-08-08 18:10:58 +00:00
591a3023e8
made plain mode work with Abaqus
...
ATTENTION plain mode (Marc and Avaqus) does not support writung out the deformed geometries
2013-08-08 15:00:22 +00:00
3fcc00910c
fixed bug that occured under marc (and abaqus?) with openmp:
...
"lastLovl" (for marc) and "lastStep" (for abaqus) have to be global module variables in FEsolving.f90 instead of local variables in the respective DAMASK_* files; otherwise they are initialized with zero each time hypela2/umat is called.
2013-08-08 12:53:03 +00:00
7f3c24e1f1
fixed some buggy last minute changes in the last commit
2013-08-08 09:13:29 +00:00
23e8fcbc51
updated config file with new convergence parameters
2013-08-08 09:12:12 +00:00
ac92b90e0b
fixed al and pol solver, now checking for div(p) = curl(f) = 0
2013-08-07 17:20:05 +00:00
f2d6703148
multiplication now sensitive of crystal structure, yet multiplication in bcc identical to fcc except for the contribution of edges which is completely dropped for bcc
2013-08-05 09:26:37 +00:00
813ed130b0
nonSchmid behavior now ready to use for bcc with phenopowerlaw and nonlocal constitutive model.
...
nonSchmid tensors according to Koester,Ma,Hartmaier,2012.
extended lattice_Sslip with non-Schmid tensors (the full non-symmetric tensors are required for the tangent and cannot be retrieved from the symmetrized Mandel notation)
2013-08-05 09:23:21 +00:00
9f0fe873ba
plain mode (no ping pong) now seems to work for marc, further testing needed
...
regular sequence of computation modes is
inc 0: 1,1,1,…
inc 1: 0,0,0,…
7,1,1,…
0,0,0,…
1,1,1,…
and so on
after a cutback the computation modes follow as
inc 5: 8,0,0,…
1,1,1,…
0,0,0,…
1,1,1,…
2013-08-02 16:19:45 +00:00
fa3be9a967
corrected lastLovl introduced in rev2593
2013-08-02 15:44:28 +00:00
5b80ef3a4c
fixed wrong error calculation in Polarisation and AL solvers, and strictened tolerances for tests
2013-08-02 13:55:44 +00:00
8d6b840802
removed variable lastMode from FE_solving, used to be used for detection of first call after ping pong; now this is done by checking for a change in the lovl (macro) or a change in the calculation step (abaqus)
2013-08-02 13:28:50 +00:00
74791a6686
corrected invalid error for mismatch_p
2013-08-02 11:48:24 +00:00
3d687be8b0
Changed order of blocks associated with different tasks:
...
backup jacobian
restore jacobian
age results
collect
calc
This becomes important if multiple tasks are requested by one call to CPFEM_general. In plain mode this could, e.g., be
1) backup jaco, 2) age results, 3) calc
2013-08-02 11:36:51 +00:00
7d2206356e
parallelExecution flag now passed as input variable by CPFEM_general; flag is set on the solver level (DAMASK_abaqus_exp.f, DAMASK_marc.f90, etc.)
2013-08-02 11:20:11 +00:00
4f9dbfa193
last commit also solves problem with infinite loop in case of a cutback in homogenization
...
corrected indentation of a comment
2013-08-02 07:59:55 +00:00
a08d263865
remnoved some unused fuctions from use statements
2013-08-02 06:18:41 +00:00
a7f0f4ed79
moved some small part of the code that remembers maximum and minimum stress/stiffness values to different location
2013-08-01 16:27:37 +00:00
728facd451
corrected indentation level of parts of the code
...
moved debugging output of stress and stiffness to different position in code
2013-08-01 16:10:56 +00:00
ac2ca43cfc
added svn properties
2013-08-01 09:13:46 +00:00
2dc985f558
set tolerances to useful values and renamed them.
...
allowed "keyword = value" in numerics.config (simply removing "=" from line)
2013-07-31 15:03:38 +00:00
b5a11f9d31
fixed bug in AL, weakened correction slightly
2013-07-30 21:04:41 +00:00
81531097f1
changes on convergence tolerances of AL and Polarisation, switched back to immediate correction of stress bc but only when last two average stresses are close to each other (cosine decay)
2013-07-30 15:32:55 +00:00
03d8f14a98
introduced dynamics for high strain rate simulations. so far only works for materials with homogeneous density. the density is read in as an optional argument in the load file using the keyword 'den' or 'density'. if density > 0 then inertial terms are added to the stress equilibrium. an implicit euler time discretisation is used to calculate the inertial terms.
...
dynamic problems are length scale dependent so make sure the geometry size is meaningful (1 m^3 or N m^3 for example is too big for a RVE!).
not specifying a density (density = 0) will perform a quasi static simulation as before.
2013-07-26 16:25:37 +00:00
216063fe36
added Polarisation scheme as solver
2013-07-24 13:06:16 +00:00
4f7cd76b29
renamed texture_rotation into texture_transformation
...
changed keyword for material.config to axes in line with geom_fromAng.py
former keyword rotation is still recognized for compatibility
2013-07-24 11:09:39 +00:00
f896b4a01e
updated Marc/Mentat integration once more to minimze interference with original instal
...
added support for Marc2013, which is now default in apply_DAMASK_modifications
2013-07-24 08:41:58 +00:00
ebe8361af0
decoupled compatibility/equilibrium calculation from stress BC correction. needs more iteration for mildly contrasted materials, but there the basic scheme is better suited anyway. but now converges better for highly contrasted VEs
2013-07-23 17:42:15 +00:00
3749cd5564
changed "math_AxisAngleToR" to "math_axisAngleToR" to be consistent with spelling in math.f90
2013-07-22 09:43:35 +00:00
bbb0803ce4
itmin was always +1
2013-07-17 19:58:48 +00:00
74a7840a59
wrong intent(in) statement fixed
2013-07-15 10:13:28 +00:00
8210b14e90
comments for doxygen
2013-07-12 06:57:15 +00:00
4407edd802
checked convergence reporting for AL and BasicPETSc, seems to be ok now.
2013-07-08 15:48:13 +00:00
27c64ba4ad
corrected line breaking for /echo/ tag
2013-07-08 09:46:38 +00:00
1db24d2a72
removed duploicate writes
...
changed last occurences of old mode syntax
one more change in the direction of a plain mode, i.e. when there is no collect cycle
2013-07-04 11:59:45 +00:00
8f146ad385
fixed bug in cosine filter
2013-07-02 04:38:18 +00:00
8ccdfb27f3
reworked the hexagonal slip system order and adjusted interaction matrices to a logic that facilitates later system additions without altering existing structure.
2013-07-01 14:01:42 +00:00
4a291dc372
implementation of twin nucleation criteria according to Davids PhD thesis
...
applies for fcc crystal structure only
2013-07-01 13:06:01 +00:00
6ec57db0c6
fixed writing out of initial configuration for spectral solver in case of ngrains != 1, small formating improvements in other files
2013-07-01 06:40:09 +00:00
40ace5c666
more documentation and parameters capitalization unified and using ipc in all modules (sometimes called gr)
...
nonlocal: only missing line continuation in string fixed
2013-07-01 06:10:42 +00:00
f408ea3381
corrected error msg typos
2013-06-30 00:17:58 +00:00
5f20c86905
small documentation and output fixes
2013-06-28 18:59:21 +00:00
ef2c2af471
doxygen documentation for J2
2013-06-28 18:58:10 +00:00
fd8d85896a
error msg in case of unknown keyword was not properly trimmed --> 64kB of spaces...
2013-06-27 16:41:00 +00:00
f9f76fa158
missed these three files in last commit!
...
[added possibility for multi-level inclusion of files in *.config and loadcase files.
include subfiles by stating
{path/to/include}
]
2013-06-26 19:19:41 +00:00
98528f9a89
added possibility for multi-level inclusion of files in *.config and loadcase files.
...
include subfiles by stating
{path/to/include}
2013-06-26 19:19:00 +00:00
0f1bb4f555
corrected doxygen documentation tags
2013-06-25 06:08:33 +00:00
aea8ab144a
changed all file reads consistently to 65536 bytes length
2013-06-24 13:33:30 +00:00
9a1ad7e089
added third value for slip twin interaction in fcc dislotwin example
2013-06-24 12:53:56 +00:00
7b2e48df68
new 'gradient' filter based on greens function from gradient elasticity theory. work in progress
2013-06-21 17:26:05 +00:00
81cdd2b1cc
added second type prismatic slip system for hexagonal lattices as 6th slip family.
...
consequently, 4 new interaction types (21,22,23,24) available for slip/twin and twin/slip.
interaction of slip/slip got rearranged and now has 42 types...
list of former --> new:
6 7
7 8
8 9
9 10
10 11
11 13
12 14
13 15
14 16
15 18
16 19
17 20
18 22
19 23
20 25
21 28
22 29
23 30
24 31
25 33
26 34
27 35
28 37
29 38
30 40
2013-06-14 10:20:31 +00:00
a78f91311e
added svn properties: line ending: LF and keywords: ID
2013-06-14 09:49:33 +00:00
1c25403b5b
changed default values of AL spectral solver tolerances. should've been done along with commit 2254.
2013-06-12 10:06:04 +00:00
daf89806b1
fixed bug in deltaState; used to lead to unpredictable values in accumulated shear, since deltaState was not defined at this state position
2013-06-11 21:03:23 +00:00
296a5040b9
fixed bug in initialization when reading in material.config.
...
Fortran does not short-circuit, e.g. (if a>0 .and. b(a) ==c) might cause an out-of-bounds error when a=-1 it'll try to access b(-1)!
2013-06-11 20:16:40 +00:00
6f7740a243
made doxygen working for MSC.Marc again, small changes on the todo-statements for doxygen, they don't work on single lines of codes but only on module/variables
2013-06-11 16:35:04 +00:00
ce9f92a884
polishing output
2013-06-11 10:27:38 +00:00
1b53bad9a4
removed doubled equal sign in compiler name definition
2013-06-11 09:06:25 +00:00
a7b6093edc
fixed bug in include_linux64 for Marc 2012, tests should run again after updating the copy in /msc/....
...
polished two other versions of this file
unified output format for /echo/ in material.f90
2013-06-11 07:28:08 +00:00
55735b9580
grainrotation output now uses corrected rotation math
2013-06-07 09:35:00 +00:00
5d7f7f1bc5
reverted accidently commited changes to Makefile.
...
one public statement in math.f90 still prevented compilation of core module, fixed that
2013-06-07 07:27:12 +00:00
e6ca36c7d7
removed old DAMASK_marcXXXX.f90 source files.
...
If you just use one Marc version, simply select DAMASK_marc.f90, this matches for all releases.
DAMAKS_marc.marc compile with Marc 2010 does not work with Marc 2012. In case you need more than one Marc version in parallel, run symLink_Code.py in /code/setup to generate symlinks for Marc version 2010,2011,2012
2013-06-06 16:04:40 +00:00
06b977ff61
added public statements to fftw functions and constants after whole math module is private now
2013-06-06 09:25:27 +00:00
622e2dcf15
Fixed bug in math rotations: passive and active rotations were not clearly distinguished and partly mixed up; yet, luckily, only resulted in wrong output of euler angles.
...
Now fixed with following convention:
Rotation conversions do not switch implicitly from active to passive or vice versa EXCEPT when converting to or from any "Euler" type (Euler angles or Euler axis/angles). Those functions expect a passive rotation as input if converting to Euler type and return a passive rotation if converting from Euler type.
2013-06-05 19:10:37 +00:00
84c43741a6
reworked distribution of microstructure constituents. now each material point represents "as good as possible" the fractional content of constituents.
...
removed error for volume fractions not equalling 1.
implemented capability to rotate the texture given in material.config.
2013-05-29 17:23:49 +00:00
a21dd816c7
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
...
removed debug output of geom_fromEuclideanDistance.py
2013-05-28 17:31:55 +00:00
a6361738fb
(again!) fixed bug that was introduced in rev 2085: messed up indices of stiffness matrix in calculation of Poisson's ratio
2013-05-26 14:31:31 +00:00
ab997f19ac
fixed bug in nonlocal state init that was introduced in rev 2438 and used to reset states from other constitutions
2013-05-24 13:43:44 +00:00
c0539d2383
replaced all remaining occurrences of state indices
2013-05-24 11:48:34 +00:00
e2d970ce57
combined some state indices to an array with a more generic name
2013-05-24 09:02:30 +00:00
ad4a66cb4e
use named state variable indices in "deltaState"
2013-05-23 21:46:15 +00:00
332b207270
use named state variable indices in "kinetics" and "microstructure"
2013-05-23 21:40:00 +00:00
5900076d72
rename state variable index for critical resolved shear stress from "iTau" to "iTauF"
2013-05-23 21:32:36 +00:00
ad2a245cdf
use named state variable indices in "microstructure"
2013-05-23 21:28:45 +00:00
c02645c996
use named state variable indices in "aTolState"
2013-05-23 21:13:56 +00:00
f04a531e9b
use named state variable indices in "stateInit"
2013-05-23 21:10:31 +00:00
65524b7f84
corrected named indices for state variables; however, not yet used
2013-05-23 20:30:06 +00:00
e249366ded
introduced named indices for state variables; however, not yet used
2013-05-23 20:15:23 +00:00
72129cae00
removed prefix "constitutive_nonlocal_" from all private variables
2013-05-23 19:56:36 +00:00
b559666436
replaced FE_maxNipNeighbors with mesh_maxNipNeighbors, which is sufficient for memory allocation, since this gives the maximum of neighbors in all cp elements
2013-05-23 17:46:21 +00:00
77e9b80a16
bug fix for calculation of fluxdensity and slipnormal/direction in constitutive_nonlocal_postResults: indices for Fe were missing
2013-05-23 14:52:57 +00:00
41faa60323
fixed bug in backstress calculation for elements with periodic neighbors
2013-05-23 12:36:48 +00:00
3aaf60cffe
polishing
2013-05-23 12:25:56 +00:00
ec2503253e
added output of slip direction and slip normal
...
changed name of fluxdensity outputs
2013-05-23 08:19:36 +00:00
399a0218c7
bug fix on commit 2424 that caused compilation errors
2013-05-22 09:40:23 +00:00
e758ee32be
improved accuracy of accumulated shear output: take shear rate from LpAndItsTangent for time integration
2013-05-21 10:04:52 +00:00
882c3e155f
Adding two titles for accumulated shear due to "slip" and "twin"
2013-05-19 20:34:40 +00:00
a104fda3b9
Adding accumulated shear due to "slip" and "twin" as two outputs
2013-05-19 20:32:06 +00:00
3759024b42
forgot to set neighboring_rho (also reverting changes made in rev 2384)
2013-05-19 19:23:31 +00:00
871df5427d
Correction for shear_rate_twin in postresults: characteristic twin shear was missing
2013-05-19 15:45:34 +00:00
c7ba8a2a9b
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
4416efe89b
doxygen documentation for constitutive_none
2013-05-17 17:09:42 +00:00
7833f79f75
replaced numerics_unitlength with mesh_unitlength
2013-05-17 16:52:19 +00:00
0504fb3b21
reverted changes made in rev2384
2013-05-17 12:54:47 +00:00
57b591ff39
corrected PETSc debug and Capitalization
2013-05-16 08:55:10 +00:00
190a59b707
set Lib_VTK_IO-master.zip and related files back to initial version, new version is not working with MSC.Marc 2010
2013-05-15 16:43:18 +00:00
7ae786e802
fixed bug in mesh_spectral_build_ipneighborhood that was introduced in rev2390: loop counter were mixed up
2013-05-14 09:45:22 +00:00
364267afa2
fixed bug when having . at end of directory name, added check to see if the specified working directory exists
2013-05-13 14:10:48 +00:00
872f6a9d90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
...
Use keyword "f" for this behavior, don't use it as short name for freq any more!
2013-05-13 09:44:23 +00:00
6fac7c347c
fixed bug in constitutive_nonlocal_kinetics that was introduced in rev2088 along with the non-Schmid behavior: nonSchmid matrix of last slip system was used for all slip systems; led to extremely bad convergence due to flawed dLp_dT
2013-05-10 22:29:12 +00:00
b83b557af2
updated Lib_VTK_IO again. Contains small bug fix ans support for Base64 encoding
2013-05-10 12:57:00 +00:00
d9cc42daef
slight change in flux formulation: no flux to neighbor, not only if there is a sign change in the velocity, but also if the neighboring velocity is exactly zero
2013-05-10 08:42:42 +00:00
cfac73043d
some lines in crystallite.f90 exceeded limit of 132 characters
...
fixed bug in Lib_VTK_IO.f90 (informed author as well)
added zip file containing source of Lib_VTK_IO.f90
2013-05-08 17:48:00 +00:00
755e0e2440
vtk files are now correctly written to current working directory.
...
updated Lib_VTK_IO.f90
2013-05-08 16:10:21 +00:00
85d4a37d95
moved public data res,size and homog from mesh to DAMASK_spectral_utilities (as grid and geomSize)
2013-05-08 15:52:29 +00:00
3b788720e5
added crystallite output "neighboringelement" and "neighboringip"
...
some polishing in crystallite_postResults
2013-05-08 12:02:30 +00:00
b2a3c9235b
fixed some warnings issued by gfortran (type conversion, not needed use statements)
2013-05-08 09:23:47 +00:00
6e64b5c476
better not allow for deads to contribute to flux, since not clear at which interface they got stuck
2013-05-07 18:47:17 +00:00
1c2c9b8436
ip neighborhood was screwed up for spectral solver as of rev 2332 due to new "mesh_spectral_ipNeighborhood": used to have fastest index in z direction although it should be in x direction!
...
also removed output of node twins in "mesh_tell_statistics" when using spectral solver, since not allocated
2013-05-07 17:50:58 +00:00
fb5f94812f
corrected format strings in mesh_read_meshfile and mesh_write_meshfile
2013-05-07 13:27:51 +00:00
c7f987a3c1
"unitlength" parameter, which determines the physical size of the mesh, now available as a global mesh variable "mesh_unitlength" and written to the .mesh file during init.
...
Hence, it is available to the marc_deformedGeometry.py script via "mesh_init_postprocessing()" and "mesh_get_unitlength()", so no need for setting the scaling of the displacement vectors explicitly through an option; now displacements and nodal positions are always consistent
2013-05-07 13:06:29 +00:00
d2416abdb4
introduced new keyword 'rotation' to specify texture rotation
...
ATTENTION: so far it is read but NOT yet applied!!!
waiting for updated code for orientation assignement
2013-05-02 08:35:37 +00:00
b98ce3d22d
fixed out of range bug introduced with singleRun changes in rev. 2356
2013-04-30 12:14:07 +00:00
2a5dfbbfa0
removed #define Marc and substituted #ifdef Marc by #ifdef Marc4DAMASK which is defined by either the submit scripts or DAMASK_marcXXXX.f90
2013-04-30 09:49:30 +00:00
e912c74da5
added possibility to select "mapping" of multiple grains.
...
'average', 'avg', 'mean' --> result averaged over Ngrains.
'parallel', 'sum' --> result added up from Ngrains.
2013-04-30 09:40:06 +00:00
0d95d33646
use disk shape for twin also in initialization
2013-04-30 07:34:05 +00:00
533fcec96f
named some loops and made BUTCHER TABLEAUs parameters in crystallite_integrateStateRKCK45
2013-04-29 11:17:30 +00:00
cc72c0b17b
added two new scripts:
...
"marc_extractData" is a simple variant of the "postResult" script that extracts all data from a macro *.t16 file (quadratic elements not yet supported) and writes it into an asciitable
"addDataToGeometry" searches for corresponding *.txt and *.vtk file in a given directory and adds the data from the *.txt file as SCALARS to the *.vtk file
first script needed an additional function in mesh that returns the corresponding node of a given ip in a specific element
2013-04-28 20:56:17 +00:00
9fb6d8167b
simplified logic for single run, now not checking for extra arguments but simply checking if start and end elem/IP are the same
2013-04-26 13:23:36 +00:00
60739abb0d
corrected statistics reporting in case of cutback
2013-04-26 09:13:39 +00:00
f18c6c5903
fixed bug causing no fluctuation in case of using with 3Dvisualize
2013-04-25 14:43:20 +00:00
d05ebff400
introduce commented new output with stream (no markers at begin/end) and with grid/size instead of res/dim
2013-04-25 14:03:54 +00:00
6e1cbb427d
parallel execution currently doesn't work, now disabled for explicit
2013-04-24 12:32:25 +00:00
650b7ef4ac
added python script that produces vtk files with the (node based and ip based) deformed mesh from marc output file
2013-04-23 18:30:56 +00:00
51552b027d
fixed bug: initialize computation mode to zero, used to be unset for lovl=4 and not(timinc < theDelta .and. theInc == inc), which unpredictably caused trouble with marc
2013-04-23 14:42:22 +00:00
5837b25e27
accidently commited constitutive.f90 wasn't working, fixed now
2013-04-23 07:37:14 +00:00
d5e4a354e6
misplaced space corrected
2013-04-22 15:35:15 +00:00
b5b6bf56d4
reintroduced Calculation of forest projections for edge dislocations, got lost after rev.1908
2013-04-22 15:17:24 +00:00
8da7544978
marc doesn't need error prone setup_code any more, moved Marc includes from code/include to lib/includeMarc
...
DAMASK_marcXXXX.f90 now is not a copy any more but contains one definition and an include statement
setup_code of spectral solver is now replaced by the standard 1) configure 2) make 3) make install
2013-04-22 14:41:33 +00:00
a7706090d2
neighborhood relations were screwed up for some elementtypes as of version 2318, might have caused segmentation faults with nonlocal model, now fixed
2013-04-22 13:35:35 +00:00
49ef6d7193
spectral_build_neighborhood now "hidden" in spectral compile part. (should not interfere with Marc/Abaqus compile anymore)
2013-04-22 09:01:58 +00:00
ca99274a5d
fluxes now always periodic for spectral solver, no need to explicitly state this in the geom file by use of "periodic" keyword
2013-04-22 08:32:51 +00:00
60fa91be9a
calculation of cellnode positions now available in python via damask.core
...
first call damask.core.mesh.mesh_init_postprocessing(meshfilename) to initialize all necessary mesh variables
then damask.core.mesh.mesh_build_cellnodes(nodes) calculates the cellnode positions for a given list of node positions
the meshfile that is needed for the init is created automatically by mesh_init in DAMASK
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
For marc simulations, run
./code/setup/setup_code.sh
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2013-04-21 18:48:59 +00:00
d203e8dece
removed extra comma (might have caused issues?)
2013-04-19 16:05:13 +00:00
e8f238a413
added specialized ipNeighborhood calculation for spectral solver case
2013-04-19 16:04:20 +00:00
12760026a4
last version still did not compile: IO_write_jobFile was not used by mesh_init
2013-04-19 13:02:37 +00:00
55bc741d1d
last version did not compile: fixed small typo in mesh_init
2013-04-19 12:59:45 +00:00
4bc5e6717b
fixed small bug when calculating mesh_Ncells
2013-04-19 12:41:06 +00:00
103c770ee6
fixed bug in cell generation: "FE_Ncellnodes" was not correct for elem type 17 and 136
...
too much memory allocated for mesh_cell
2013-04-18 17:56:14 +00:00
6b46a9c338
introduced output of initial geometry (vtk file) to mesh
2013-04-18 16:40:49 +00:00
8b2d9d8155
further improvements on implementing the plain mode
2013-04-16 17:07:27 +00:00
2ba986be2a
introduced new dummy module "libs" for inclusion of further library sources. contains kdtree2 and Lib_VTK_IO at and is enabled for the spectral solver only at the moment
2013-04-16 12:45:12 +00:00
2a6ac44496
Major restructuring of mesh.f90 due to introduction of "cells". A cell is the volume (area in 2D elements) that surrounds an ip. It is described by up to 8 cell nodes and is used to calculate ip volume, area, and face normals. It can also be used to generate a mesh for e.g. paraview that contains ip output as cell centered data.
...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
For marc simulations, run
./code/setup/setup_code.sh
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2013-04-15 08:13:20 +00:00
eaccf88e12
fixed bug that was introduced in the element type mapping in version 2305
2013-04-10 13:22:02 +00:00
9b1fd579d4
corrected phase numbering in example material.config
2013-04-10 12:09:09 +00:00
ddcc795461
allowed arbitrary grid (formerly know as resolution), i.e. any integer>1 in each dimension is possible.
...
removed square root correction for divergence (doesn't make sense)
fixed FFT debug of spectral solver
2013-04-10 10:19:16 +00:00
4338cd13bc
- added element type 54 for macro (2d 8node 4ip reduced integration)
...
- automatically raising error for unknown element type inside mapping function
2013-04-10 09:38:40 +00:00
338e338c9a
- fixed bug in volume calculation of 2d elements
...
- subroutine "mesh_build_ipVolumes" uses openmp parallelization
2013-04-10 08:24:53 +00:00
d80d416c32
2d elements now have a volume corresponding to a thickness of 1; used to have zero volume
...
now also 2d elements can be used with nonlocal model
2013-04-09 18:07:30 +00:00
5b508b5ee4
no need to exclude any geometry type from usage of nonlocal model
2013-04-09 13:10:31 +00:00
924d943edc
simplified interface of CPFEM_general (removed P and F, made cs and dcs/dE optional)
...
commented and cleaned up the marc interface.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
For marc simulations, run
./code/setup/setup_code.sh
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2013-04-09 10:08:00 +00:00
7b5a202e8c
enabled alternative (and soon standard) keywords grid (resolution) and size (dimension).
...
removed errors for odd resolution
2013-04-08 14:22:32 +00:00
ad879ebcf9
forgot to delete all occurrences of obsolete "constitutive_nonlocal_ accumulatedShear" in last commit
2013-04-08 08:51:12 +00:00
10e50bf41d
improved accuracy of "accumulated shear": now added as a state variable, which facilitates integration (dotstate=shearrate); needs absolute tolerance value for state integration in material.config
2013-04-04 13:37:14 +00:00
3c25723139
- make sure that formerly blocked density is not able to move to neighbor until it is remobilized
...
- added some explicit indices instead of ":"
2013-04-03 16:29:48 +00:00
6d3f05b387
small changes in nonlocal constitutive model:
...
- make sure neighboring density is always greater equal zero
- no extra Bauschinger in postResults
2013-04-03 16:22:55 +00:00
5b8257a7f9
added debugging possibility for MSC.Marc, rename parameters to CAPITALS
2013-03-31 13:06:49 +00:00
2f76365ac8
fixed wrong string concatenation
2013-03-30 19:43:06 +00:00
965ab38217
corrected error bounds for spectral parameter "maxCutback"
2013-03-28 16:04:47 +00:00
d59e072209
general polishing
2013-03-28 13:50:20 +00:00
7f37f55904
added missing line continuation in numerics and explicit private statements in the other files
2013-03-28 10:37:00 +00:00
d2ae06015a
moved "Random is random" to output of random seed, cleaned up a little
2013-03-28 10:02:11 +00:00
745ca5a6a5
added "public" (and where possible "protected") statements to functions/subroutines/variables/parameters where needed
...
added -fmodule-private to compile options for gfortran, i.e. gfortran won't compile anymore if an entity is not explicitly declared as public but used in another module to ensure stronger encapsulation
2013-03-28 07:40:30 +00:00
b8f8d66f82
total density used in backstress calculation now based on average of neighborhood
...
fixed small bug in state_init: random distribution of density was probably not working correctly, as some variables were not properly initialized
2013-03-27 13:04:01 +00:00
39a70e8a19
fixed bug in coordinate calculation when no average F was given (scaled wrong by ncp_elems**2)
...
other changes: just polishing + some more comments
2013-03-27 12:28:55 +00:00
b6aecdac17
corrected debugging output of node twins
2013-03-27 10:25:37 +00:00
e25af5db04
added function for finding the (non-periodic) nearest neighbor
2013-03-27 10:14:44 +00:00
44eb771583
added crystallite output of current ip coordinates
2013-03-27 10:12:28 +00:00
15b6242585
set more appropriate default values for spectral solver tolerances (abs stress BC was at huge())
2013-03-26 16:36:52 +00:00
33dc8251c0
saved some memory not copying data within one function
2013-03-25 19:02:12 +00:00
97fe4400ff
corrected comment explaining structure of nBlock
2013-03-25 18:36:21 +00:00
e6f6c22a30
polished Abaqus Standard, changed inclusion of OMP functionality from "spectral style" (include) to "marc style" (use) to prevent explicit from crashing
2013-03-25 18:25:15 +00:00
966ad2826b
merged two-stepped subroutine call into one call, added comments and cleaned up.
...
working for small example (with and without openMP), don't know if the results make any sense
2013-03-25 17:45:58 +00:00
19655c2d92
significantRho check was flawed for dipole density
2013-03-25 17:36:04 +00:00
d55ba3e3e6
now using correct exit routine for Abaqus/Explicit
2013-03-25 13:52:22 +00:00
02f092492e
updated copyright header
2013-03-22 17:35:05 +00:00
5b96c1d62a
scaling of deformation gradient fluctuations now possible in x,y,z independently (give array).
2013-03-22 15:09:55 +00:00
be655ae536
Changed AL solver errors to absolute. Stress boundary error now max of relative and absolute error
2013-03-22 14:46:55 +00:00
2a6f66d504
Abaqus explicit now with correct interface, seems to work now
2013-03-21 17:24:58 +00:00
cee90bbdb3
simplified dislocation kinetics: dropped relativistic correction of velocity, since the infinite attack frequency already sets a limit for the velocity; dropped second; also dropped the correction term for backward jumps, since it was probably not meaningful
2013-03-21 12:52:29 +00:00
0b10c52b77
restore Jacoby after cutback, was lost during restructering
2013-03-15 06:27:04 +00:00
dd06d07e1c
set default number of iteration for spectral solver to 250 instead of 40, abaqus doxygen now does the correct inclusion (everything appeared twice before)
2013-03-14 23:10:02 +00:00
1779510dda
remove some unused variables, set default value for divergence calculation to 1.e-5 and made calculation independent of dim and res
2013-03-12 18:48:28 +00:00
3e2ecbe0a3
added time stamp to init of lattice
2013-03-07 22:45:00 +00:00
b9e0326240
added function to calculate the gradient, addGradient.py will follow
2013-03-07 07:58:42 +00:00
1ce6028ad3
simplified CurlFFT and DivergenceFFT functions, and did the last changes to Utilities related to the new structure of the spectral solver
2013-03-06 19:34:30 +00:00
60633ffd98
some doxygen corrections
2013-03-06 14:41:15 +00:00
1f4d7c2ca4
changed reference stiffness to min max avg from volume avg. using terminally ill information in convergence check
2013-03-06 14:31:13 +00:00
7e0ea5dd04
hickups in doxygen documentation fixed
2013-03-05 14:35:26 +00:00
5c1185a5d2
renamed F_lambda to F_tau for clarity. using stress tangent to precondition equations
2013-03-04 09:49:40 +00:00
ada2beb8b8
reorganized calculation modes for CPFEM, now having better readable and cleaner structure
2013-03-01 11:48:29 +00:00
33e75972cc
unified indices used for better understanding
2013-03-01 09:36:45 +00:00
72bc1df832
forgot in previous commit
2013-02-28 17:37:26 +00:00
0209a1d5a7
restructured AL solver to resemble polarization scheme and introduced alpha and beta parameters in numerics to determine what kind of solution you want. alpha = beta = 1 results in the AL scheme. alpha = beta = 2 results in the accelerated scheme. safe values are anything in between. changed the solver to use stress calculations on the campatible field which seems to result in faster convergence.
2013-02-28 17:35:02 +00:00
59da88460e
preparation for introduction of plain mode and restructuring of calc modes for CPFEM_general
2013-02-27 20:41:14 +00:00
875abcd06f
replaced some array assignments, which might have caused trouble when using the "timeSyncing" option, by parallelized loops of scalar value assignments
2013-02-27 16:36:12 +00:00
62e55483f7
fixed bug in lattice: line continuation character was missing
2013-02-27 10:49:23 +00:00
3736ab1d97
added shortcuts for two do loops in the "timesyncing" procedure
...
math_pDecomposition enclosed by omp critical statement; somehow, this subroutine is not thread safe, not clear what exactly the problem is
2013-02-27 10:32:37 +00:00
bac186c5b7
removed 2003 standard initialization expression not supported by ifort so far
2013-02-27 07:35:53 +00:00
0be6706483
some more detailed doxygen comments
2013-02-26 19:01:31 +00:00
04c2b22766
removed time information from interface routines, should work now
2013-02-26 12:49:07 +00:00
9ec87e8d1f
moved include statement of IO.f90 before corresponding use statement, still untested
2013-02-26 06:28:28 +00:00
72418f7b60
removed -c from options to compile_spectralSolver and added functionality to remove "-c" or "--compile" from command line arguments befor calling compile_spectralSolver
2013-02-25 18:46:36 +00:00
07ff1f7c93
reporting current time for most module inits
2013-02-25 16:34:59 +00:00
5b16f57727
added int vec pointer for more efficient memory allocation of homog and micro counting (elemsOfHomogMicro) in material.f90
2013-02-25 13:13:52 +00:00
8f2e164fd2
some more documentation, mainly on the exit codes
2013-02-23 00:24:30 +00:00
393c60565d
one line was beyond 132 characters
2013-02-22 05:38:02 +00:00
42b96354db
doxygen comments
2013-02-21 23:08:36 +00:00
1f86e098ba
doxygen documentation, enabled uncommented debug statement to be turned on by switches, minor polishing
2013-02-20 22:06:15 +00:00
a98be4e0cf
IO_error and IO_warning crashed for string of zero length (or only containing whitespaces), fixed now.
...
Also added BEGIN and END statement to numerics in case of non-presen DAMASK_NUM_THREADS, would prevent this error and is better for debugging
2013-02-20 21:56:59 +00:00
dfe34fd162
specified quit as external as it is not part of a module
2013-02-20 14:37:12 +00:00
ecbc15abd0
doxygen related changes: corrected arrows in material.f90 and replaced $REVISION$ by substitution key to be changed after test
2013-02-19 22:12:05 +00:00
d8da2f60d8
added core module function math_periodicNearestNeighborDistances
2013-02-19 14:56:26 +00:00
7461e13c1e
relocated spectral_quit() into driver code.
...
added (dummy) core_quit() for Python damask module.
2013-02-19 14:54:34 +00:00
b57d001e71
added hints on offending positions when parsing material.config
2013-02-15 08:26:38 +00:00
c1cf446774
parsing of material.config file now expects adequate number of (slip/twin) family entries according to given lattice type.
...
used to read up to maxN, but that caused unnecessary IO_warnings...
2013-02-14 22:24:55 +00:00
cd0325baf1
introduced atol_twinfrac for dislotwin
...
set values in material.config example
atol_rho 1.0,
atol_twinFrac 1.0e-7
2013-02-14 09:57:26 +00:00
77c0b32af9
removed possible (but not-working) output of schmid_factor_shearband from dislotwin
2013-02-14 08:53:17 +00:00
d715ec769b
removed debug statements from symlink_Code.py, added autodetection for fortran compiler and disabled compiling on default
2013-02-13 18:45:49 +00:00
1496c62258
updated doxygen config file for FEM solvers, replaced some external statements, removed debugging options from abaqus_v6.env causing Abaqus to crash (didn't detect the bug so far), added new homogenization test to automator, added more debug options + comments to Makefile
2013-02-13 17:54:56 +00:00
b78fafc3b5
corrected integer initialized to reals
2013-02-13 15:47:00 +00:00
12b81a2b75
moved second file extension (.pes) into DAMASK_abaqus_*.f
2013-02-13 10:56:50 +00:00
35346b70b5
fixed RGC homogenization in case dt==0
...
removed misplaced parameter statement in IO.f90
2013-02-13 09:36:06 +00:00
0856a7aa32
fixed bugs and simplified warning reporting when reading in int, float, and string values
2013-02-12 19:00:41 +00:00
59a265ec7f
forgot intent(in) statements needed for pure routines
2013-02-11 10:56:10 +00:00
f0b4281400
removed unused variables, added pure statements, and declared external functions as external (using gfortrans debug option)
2013-02-11 10:43:45 +00:00
c7c81a5ab5
removed unused variables and declared external functions as external
2013-02-11 09:44:17 +00:00
a89efaa4a6
added missing bracket and substituted one more forall by do loop
2013-02-09 08:23:47 +00:00
f928d0ca0f
some changes on the IKML libs, now using explicit linkin
2013-02-09 08:17:12 +00:00
e9f351c69b
forgot to commit
2013-02-08 15:56:58 +00:00
147cc8efca
removed debug statement
2013-02-08 15:56:24 +00:00
e644c6dbc5
improved reading in of values, now only warnings in case of problematic entries in material.config
...
divergence calculation sqrt scaling optionally introduced for basic scheme spectral solver
2013-02-08 15:55:53 +00:00
59e59c90c5
added Option DEBUG to Makefile to turn run time debugging on, compile tests use this option
2013-02-08 15:43:15 +00:00
32a416e298
fixed memory leak associated to accumulated shear storage.
2013-02-08 13:33:25 +00:00
c7740b41a5
added possible accumulated shear output request to example list of phenopowerlaw
2013-02-07 11:09:14 +00:00
eacf6f1196
now also fixed the abaqus part
2013-02-07 10:45:10 +00:00
a036f1eb3a
as some IO functions are no longer pure I changed some forall statements to ordinary do loops
2013-02-07 08:52:47 +00:00
722d5574fb
added output capabilities for accumulated shears on slip and twin systems.
2013-02-06 18:09:11 +00:00
362cbf3359
Made corresponding changes in the constitutive files and DAMASK_spectral_driver and interface files with respect to the changes made to IO.f90
2013-02-06 16:45:34 +00:00
b591dd5f33
made changes to string, int, float interpretations and added warnings.
2013-02-06 16:41:09 +00:00
c4b877d4f1
replaced missued family index by system index
2013-02-06 08:45:08 +00:00
037081831b
last commit did't compile, hope it's working as it should now
2013-02-05 20:07:25 +00:00
4997328de1
added use statements
2013-02-05 15:03:36 +00:00
865842b0ed
LpandTangent assumed to be called with deviatoric stress input.
...
Now calculates deviator internally...
(Might have led to non volume preserving deformation.)
2013-02-05 13:47:00 +00:00
79e7deca55
introduced dedicated calculation of interface normals in IP neighborhood. (2D elements did not work so far..!)
...
fixed definitions of some (2D) interface planes to have all normals pointing outward.
removed "int, private :: i" defined for spectral compilation.
2013-02-05 13:27:37 +00:00
cc9eb685fe
fixed wrong setting of coordinates in spectral solvers and removed old python scripts for setup of code and processing
2013-02-05 12:31:44 +00:00
45344cff6b
added check if nGrains==1 when non-local plasticity is used
2013-02-04 14:34:01 +00:00
01a7850517
in Abaqus there is a second input file ending (.pes), if this file exists it is to be preferred over the *.inp file (thanks Steffen)
2013-02-04 08:29:58 +00:00
7f5e9f70b2
added missing flags
2013-02-03 09:22:25 +00:00
6cd6172c0c
fixed bug in dotState causing strange hardening for certain parameters
2013-02-01 15:44:50 +00:00
b0263a8aab
added possibility to parse options for setup_code.sh and setup_processing.sh + other improvements in setup functionality
2013-02-01 12:21:56 +00:00
c2495d0d4a
changed misplaced private to public statement and renamed qsort to math_qsort
2013-02-01 07:26:21 +00:00
e74b5da19a
changed all remaining routines to fortran-fast arrays (geometry reconstruction etc.)
...
changed all remaining routines in f2py to more clever determination of array size (requires f2py >= 2.0)
enabled 3D visualize to work with odd resolution by switching to linear reconstruction
PLEASE NOTE: Redefinition of routines for f2py might cause trouble -> DELETE DAMASK_ROOT/lib/damask/core.so in this case
further changes: added pure statement where possible, polished, unified use of "Q" for "Quaternion" and reordered math to have similar routines together
2013-01-31 16:28:08 +00:00
04d48c79b9
symlink_Code.py split seperately from the previous setup_code.py
2013-01-29 15:31:01 +00:00
bbd7e72fe8
setup_Makefile split seperately from the previous setup_code.py
2013-01-29 15:30:28 +00:00
6dcea3f419
a simple shell script to run setup_Makefile.py,compile_SpectralSolvers.py and symlink_Code.py in the said order
2013-01-29 15:29:43 +00:00
c816d5ca74
compiling DAMASK_Spectral split seperately from setup_code.py
2013-01-29 15:28:21 +00:00
5228af627c
corrected calculation of gmod from c_66 (Voigt approximation for a random polycrystal)
...
approximate twin volume by a disk rather than an elipsoid
2013-01-29 14:59:26 +00:00
08a2aa79f7
doxygen comments for homogenization.f90, unified naming ip->i, el->e
2013-01-29 10:28:01 +00:00
1594a4bdf8
doxygen comments for isostrain, unified naming ip->i, el->e
2013-01-28 16:36:26 +00:00
3ffd6499b1
change bash-only "let" to "`expr`", abaqus_v6.env now suppresses warnings about long lines (there are only comments anyway)
2013-01-28 15:30:51 +00:00
ae9af9143d
in python never put import of standard library modules on the same import
...
line as own modules (here:damask)
- und die folgenden Zeilen werden ignoriert --
M setup_code.py
2013-01-24 14:45:23 +00:00
db12e6e0c8
removed forgotten debug write statements (thanks Franz!)
2013-01-24 13:20:57 +00:00
7a84209a14
bug fix in microstructure
...
-This line, and those below, will be ignored--
M constitutive_dislotwin.f90
2013-01-24 13:12:51 +00:00
6ce78cf806
gfortran now detects "call flush" statements, removed the last of them in mesh.f90
2013-01-23 21:50:01 +00:00
d1985e0bef
checked and improved on Franz' one call to CPFEM only improvement
2013-01-23 19:56:45 +00:00
96577b18fb
introduced error code for run_test.py
2013-01-23 18:33:46 +00:00
50e874f887
fixed bug in elasticity matrix calculation
2013-01-22 15:48:47 +00:00
652a8366fe
splitted lines > 132, added pure statements where suggested by gfortran 4.7
2013-01-22 13:02:23 +00:00
df089b94bd
line break in lines > 132
2013-01-22 11:06:39 +00:00
2b319f02e6
small corrections on changes related to non-schmid systems
2013-01-22 10:04:15 +00:00
f3bd920c23
added non-schmid structure
2013-01-21 23:50:28 +00:00
60fec0e8ec
added code structure for non-schmid mechanics. work in progress…
2013-01-21 23:11:16 +00:00
fd94c786f0
moved stiffness tensor calculation to lattice
...
introduced 'isotropic' and 'orthorhombic' lattice types to use corresponding symmetries in stiffness tensor. intended to be used with non-crystal plasticity models (j2, constitutive_none with isotropic, cubic or orthotropic elasticity).
2013-01-21 21:57:26 +00:00
c195f316e1
corrected calculation of twin stiffness matrix
2013-01-21 08:17:43 +00:00
9ee8108b6b
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 11:30:52 +00:00
c6a79d2b3d
divergence_correction for basic solver variants has now 3 possibilities:
...
0: uncorrected, slope per sidelength (physical dimension) e = res/dim
1: corrected by sidelength, slope per unitlength e = res/1
2: corrected such that distance between FPs e = 1
alway regarding the medium length of x,y,z direction
2013-01-16 10:40:53 +00:00
20bc97b7eb
added doxygen comments and unified naming scheme for ip, element and grain
2013-01-16 10:14:57 +00:00
8a45a90775
new crystallite output "grainrotationX", "grainrotationY", "grainrotationZ" that gives the deviation of the initial orientation in degrees around the sample reference x/y/z axis, while "grainrotation" still gives the same as axis angle pair in crystal coordinates
2013-01-16 08:45:41 +00:00
645b2605e1
corrected reporting to statistics file (*.sta)
2013-01-11 10:40:16 +00:00
4c145376a0
forgot some integers
2013-01-10 18:50:14 +00:00
6e3e06bed7
corrected PETSc macro expansion
2013-01-10 15:36:55 +00:00
563b1f5e4b
added some warning and explicit size of arrays
2013-01-10 13:33:43 +00:00
0d5e91ac87
corrected reporting of basic PETSc variant and unified reporting of all spectral solvers
...
improved warning and error in IO, now able to report correctly elements up to 9 digits
2013-01-09 22:19:32 +00:00
55b88e47b7
fixed wrong temperature when using spectral solver
2013-01-09 18:08:08 +00:00
00246ade4e
missing range in array fixed
2013-01-09 14:43:27 +00:00
093cf92338
remove omp statements during initialization, "line" for reading in from material.config now has a default (empty) value to prevent conditional jump depend on this value
2013-01-08 22:11:59 +00:00
4eaa97b33c
minor changes on buggy latest commit (wrong use statement)
2013-01-08 21:54:25 +00:00
19d86ca06a
removed unnecsessary omp statements, removed one transpose in constitutitve
2013-01-08 11:09:20 +00:00
ce7a0571fd
fixed bug in forwarding fields for AL solver
2013-01-08 10:12:03 +00:00
d90efef535
fixed bug in cutback scheme
2013-01-07 21:42:00 +00:00
738f363263
corrected small issues with PETSc debugging
2013-01-03 16:17:23 +00:00
7a43d1b6ad
added funtionality to specify working directory to spectral solver
2013-01-02 17:02:12 +00:00
766202bae9
corrected debug output of aged state: first reports for selected debug_el,debug_ip
2012-12-28 12:15:59 +00:00
f14fd45ce1
new material parameter "egdejog": fraction of annihilated screw dipoles that forms edge jogs
2012-12-23 12:56:15 +00:00
64d167fa90
loadcase rotation now working for AL solver
2012-12-17 10:18:39 +00:00
7dd1130e92
reset syncSubFrac flag when turning terminallyIll
2012-12-16 16:18:36 +00:00
92d2c83334
more debugging info for timesyncing
2012-12-16 11:30:19 +00:00
4f12073dcb
once again corrected parallelization statements
...
added some debugging writes for timesyncing
2012-12-16 10:54:13 +00:00
1baf8dea5d
load case rotation no working for Basic PETSc solver
2012-12-15 23:52:06 +00:00
5c0c7121e7
made PETSc silent by removing -snes_view from default options.
...
introduced PETSc option for debugging that introduces some debugging options into the petsc options and move PETSc initialization from numerics to DAMASK_spectral_utilities
2012-12-15 18:07:49 +00:00
566b680319
made new spectral solver the default (no need for SOLVER=NEW anymore) and added additional warnings switche to be used with gfortran >= 4.6
...
added comments
2012-12-15 16:21:10 +00:00
b1f28ba5e7
made restart working for all solvers and added corresponding test
...
corrected error handling for FFT based function in case of odd numbers etc.
2012-12-14 17:30:22 +00:00
7b87987751
introduced option for regridding to numerics.f90, working as follows:
...
first cut back is tried if material point model oder BVP solver does not converge.
If no regridding is enabled after max cut back, in case of non-converged material point the simulation stops and in case of non-converged BVP solver it continues.
set regridMode to 2 to enable regridding if BVP solver OR materialPoint model do not converge,
set regridMode to 1 to enable regridding if materialPoint model do not converge, non-converged BVP solver will be ignored as in the standard case.
For regridding, the load case need to have a restart freq set.
enabled restarting for Basic PETSc variant
2012-12-14 15:18:04 +00:00
64d9c70dc7
corrected nonconforming use of openmp parallelization
2012-12-14 14:30:08 +00:00
d559653722
small improvements on tests
2012-12-13 20:20:04 +00:00
2b4eb2a257
changed shell variable containing name of Workstation from $HOST to $HOSTNAME as this is also working on Ubuntu
2012-12-13 13:53:54 +00:00
f744fc1d47
fixed bug in parallelization: flushing of crystallite_todo was missing at a couple of places
2012-12-11 15:05:08 +00:00
6a9b19e4c0
fixed bug in timesyncing procedure: if any ip that synchronizes its time step did not converge, all nonlocals become terminally ill; before, this led to an infinite loop in crystallite
2012-12-11 13:42:22 +00:00
03a88d4798
fixed timesyncing for special case of ip that synchronizes its time step, but does not have a neighbor
2012-12-11 13:38:36 +00:00
35a0483507
fixed bug in last revision: FE_geomType was not in namespace
2012-12-10 17:22:16 +00:00
10ed848258
fixed 2 bugs: missing mapping with FE_geomtype(mesh_element(2,...))
2012-12-10 17:03:28 +00:00
37028455e9
always use the current state for leaving flux calculation when no neighbor is present
2012-12-09 12:24:32 +00:00
98d02dcffb
removed call to microstructure in stateJump function, since this is already done in the state integrator subroutine
2012-12-07 07:50:41 +00:00
149c747688
use non-corrected densities for rate check in dotState
2012-12-06 17:14:35 +00:00
1f5a30d6f0
corrected typo in random multiplication term
2012-12-06 14:04:18 +00:00
20f7053ad3
correction of interaction coefficients due to line tension effect only applies to coefficients 3, 4 and 5
2012-12-04 18:23:46 +00:00
0986a66449
accidentally also included some changes in crystallite_integrateStress in last commit; reverted these changes in this revision
2012-12-03 16:34:41 +00:00
f2dacb5f40
polished debugging output
2012-12-03 16:29:54 +00:00
9eb89b0050
made random multiplication switchable via material.config
2012-12-03 12:59:38 +00:00
62ddbf26df
slightly changed the multiplication term in the nonlocal model for the starvation case
2012-11-29 18:50:25 +00:00
f92d34dd22
removed some unused variables
2012-11-29 18:44:00 +00:00
57fed66a8e
simplified load case parsing
2012-11-29 13:26:17 +00:00
7358dd6679
fixed wrong index contraction in acoustic tensor calculation
...
(blew up calculations with zero Poisson ratio...)
2012-11-28 18:46:07 +00:00
6bb3a475ce
added output of current relative tolerance when reporting relative errors
2012-11-28 18:44:51 +00:00
5ea0139678
simplified the rate calculation interface in DAMASK_spectral_utilities.f90, corrected bug in rotation parsing and added debug option "rotation" to spectral solver options. This will show the current average stress and deformation additionally in lab coordinate system
2012-11-28 15:04:05 +00:00
07bec16268
corrected compilation exception for gfortran in case of compilername!=F90
2012-11-28 13:54:02 +00:00
29618df550
annihilate only part of the screw dipoles (specified by minimumDipoleHeight), not all; moved annihilation of screws from deltaState back to dotState
2012-11-28 12:09:48 +00:00
e10000a338
Introduced an alternative cutback scheme for the nonlocal model, that allows to keep the results of most of the ips that immediately converged, and only do cutbacks in regions where some ips are in big trouble. Only works for nonlocal model and state integrator 2.
2012-11-27 18:36:55 +00:00
e45e1316ba
removed auto detection of compilername, it only works if the file you're looking for (in our case "ifort") is in the same directory as the Makefile
2012-11-27 17:22:03 +00:00
1e32eb560e
corrected buggy calculation of Schmid matrix for twins introduced in rev1809.
...
(stress acting on twin systems was overestimated by factor of sqrt(3) due to that!!)
additional polishing.
2012-11-23 17:02:50 +00:00
11ed7fab86
corrected bug in curl calculation causing the output of transposed tensor (according to information stored in testing/9102/proof/Curl of Tensor - Physics Forums.pdf)
...
addCurl test is now done against analytical solution and working, added it to list of automated tests.
small improvements on test.py
2012-11-23 15:16:51 +00:00
e584c0e6e8
deleted space in front of preprocessor line
2012-11-22 20:04:33 +00:00
dbc26e5f25
corrected auto detection of ifort compiler
2012-11-22 13:17:54 +00:00
38ec462f4a
order of integration now same for all state integrators: first calculate the dotState and then the deltaState
2012-11-22 13:04:19 +00:00
7d196fbb25
polishing
2012-11-22 09:58:36 +00:00
23a0ca3b59
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0
...
serial calc now skips IPs when /elementhomogeneous/
for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 17:00:29 +00:00
ec8a84ded7
added output of element and ip to debug messages
2012-11-21 16:58:14 +00:00
d189a6a7a0
polishing
2012-11-21 16:57:57 +00:00
760af1fbbf
crystallite_requested now masked by execIP, now elemhomogeneous works again
2012-11-19 15:13:48 +00:00
d4a59541ad
removed write statements which were introduced for "debuging"
2012-11-19 15:12:11 +00:00
9fb94cd707
breaking crystallite loop in case of terminally ill (this functionality was probably lost since rev1886)
2012-11-19 08:39:48 +00:00
4195d53d11
message of last commit was incomplete: moved annihilation of screw dipoles from dotstate to deltaState, since it is not a rate
2012-11-17 13:54:22 +00:00
467c186f0f
annihilation of screws
2012-11-17 13:50:20 +00:00
dc5cd8a4c4
A modified twin-twin interaction matrix for BCC is introduced.
...
An introduction of a third parameter at the interactionTwinTwin in the material.config for BCC-dislotwin materials is essential.
2012-11-16 13:39:08 +00:00
d9a98417ca
switched element library to geomType based.
...
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-15 22:45:20 +00:00
aec163941d
calculate ip coordinates only once when the first ip enters calculation mode
2012-11-15 12:31:39 +00:00
bdbc202c7e
corrected typos
2012-11-15 09:22:36 +00:00
c0a5a1dfd1
Formation of the Slip-Slip interaction matrix for BCC.
2012-11-14 17:35:33 +00:00
7e683ca7c3
removed coordinates from call to CPFEM_general and introduced direct storage of coordinates to mesh_ipCoordinates
2012-11-14 14:38:10 +00:00
1896c07c70
corrected some bugs in the last commits
2012-11-14 14:33:41 +00:00
c8be3a03bd
The twin system <111>{112} for BCC is introduced.
2012-11-14 13:43:59 +00:00
6b010b4a46
Twin-slip interaction matrix for BCC is set to 0.
2012-11-14 11:53:22 +00:00
b0464ad176
A modified slip-twin interaction matrices for FCC and BCC are introduced.
...
The shear twin value for BCC is corrected.
An introduction of a third parameter at the interactionSlipTwin in the material.config for dislotwin materials is essential.
2012-11-14 11:13:16 +00:00
fb2981b4c4
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second...
2012-11-14 10:27:23 +00:00
e4ce63d689
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second... (used to be transposed for memory efficiency)
2012-11-14 10:22:34 +00:00
789e6c7d83
dropped support of MSC.Marc/Mentat 2007 and 2008
2012-11-14 09:57:18 +00:00
ad9639f2f7
check for existence of files before sym-linking to them.
2012-11-14 09:40:45 +00:00
c3926efd93
introduced logic to use gfortran as default if ifort is not found
2012-11-13 19:12:00 +00:00
922042d8d5
now automatically using gfortran if no ifort is found
2012-11-13 18:40:14 +00:00
0c87fc16f4
renamed the keyword for the make options from make to options
2012-11-13 17:26:25 +00:00
70c4e11742
added comments and structured the code. Temperature is not longer stored for each point but only to simplify restart behavior as long as it is not fully supported by the constitutive models
2012-11-12 14:14:39 +00:00
3c53f3ec9a
last version contains buggy mesh.f90; corrected typo in initialization
2012-11-09 07:52:44 +00:00
366ac28694
parallelized mesh_build_subNodeCoords and mesh_build_ipCoordinates
2012-11-09 07:47:14 +00:00
b1c3c57412
some more finetuning, still not running on gfortran 4.5.0
2012-11-08 21:33:58 +00:00
c831716b26
reseting value vector when reading in for loadcase file, otherwise NaNs might be in there
2012-11-08 20:35:31 +00:00
11264f3fe4
forgot to check for convergence flag in FPI integrator
2012-11-08 20:15:19 +00:00
60438cdbcc
criterion for crystallite cutback loop changed from crystallite_subStep to crystallite_todo; this avoids problems when the last substep of the crystallite increment is below subStepMinCryst (which is allowed during last wind forward)
...
fixed bug in the adaptive Euler integrator and the RK4 integrator, which could not reach the stateJump function, because of erroneous check for converged flag; also corrected the state counter for the RK4 integrator
2012-11-08 20:00:29 +00:00
ee5903c767
replaced real 'guessmode' with logical 'guess', caused trouble on gfortran 6.3 with ultra optimization
2012-11-08 19:32:00 +00:00
6a86f36407
now having libraries from Makefile before PETSc Libraries in linker order
2012-11-08 18:26:10 +00:00
c775edaa6d
better avoid initialization of residuum_old with huge, since it posed problems in Abaqus
2012-11-08 13:26:22 +00:00
dad9922f54
fixed bug in crystallite_FPI: stateDamper always has to be defined for each grain
...
added some OMP FLUSH statements were necessary
replaced openmp do by forall construct where possible; this is much safer and perhaps even as fast for small loops
2012-11-07 15:43:29 +00:00
bbcffa668b
some small changes in including PETSc *.h90 files to prevent warnings.
...
It seems that a bug in old gfortran 4.5.0 causes the problems, at least with 4.7.3 it seems to work after fixing the bugs in IO.f90
2012-11-07 13:11:41 +00:00
9b99825ac6
preventing array index out of bounds in case of empty line, removed to goto statements
2012-11-07 09:31:46 +00:00
5214b93342
fixed bug when reading in geometry for spectral solver
2012-11-06 17:16:01 +00:00
3ada4897fb
reordered PETSc initialization (now first part done in interface, setting of parameters done in numerics), removed unnecessary includes for PETSc
...
still not running with gfortran, use at own risk!
2012-11-06 16:00:51 +00:00
a86d528a4a
replaced call flush(6) by flush(6), slightly improved formating for output of gfortran version
2012-11-06 15:50:20 +00:00
5b6baa7c0d
introduced distinction between ip coordinates and cell center coordinates; the former can be globally calculated by subroutine mesh_build_ipCoordinates, the latter locally by the function mesh_cellCenterCoordinates; renamed mesh_ipCenterOfGravity to mesh_ipCordinates
2012-11-06 14:37:13 +00:00
bb033c5fe7
Simplified algorithm of crystallite_integrateStress while preserving (almost) same functionality.
...
Removed "leapfrogging" (increase of step for next guess, when last guess was ok); Replaced Armijo rule testing for step size by simple check if the residuum got better, since the former virtually did not have any effect; consistently using the 2-norm of the residuum rather than infinity-norm for the convergence check throughout the function
2012-11-06 12:35:45 +00:00
639d6e0655
inserted missing flush(crystallite_todo) in parallel section; might have caused trouble in parallel calculations before
2012-11-05 14:45:52 +00:00
086fe138b1
substituted matrix inversion to solve equation by direct solution routine from LAPACK
2012-10-31 09:56:26 +00:00
55dc286be2
corrected limit for upper stable dipole distance; fixed a bug in the postResults where division by zero might happen
2012-10-29 13:02:01 +00:00
f666f8dcf3
added possibility to scale the plastic shearrate by the ratio of mobile to total density; keyword in material.config is "deadZone"
2012-10-29 12:49:28 +00:00
ca596bc7af
error messages are now printed, added svn properties
2012-10-25 09:16:17 +00:00
93cc466749
third entry in mesh_ipNeighborhood stores the neighbor_index that points from each neighbor back to the central ip; needed in nonlocal model
2012-10-24 14:03:02 +00:00
13b55275b1
documented utilities and structured, worked on the restart capabilities of the new basic solver
2012-10-24 11:31:40 +00:00
5ad0eda1b6
switched saturation behavior!!
...
was \dot s_alpha = (1-s_alpha/s_inf)^a h_alphabeta \dot gamma_beta
now \dot s_alpha = h_alphabeta (1-s_beta/s_inf)^a \dot gamma_beta
current form is consistent with the genmat implementation (and appears to make more physical sense). Kalidindi_etal1992 suggested this form, but altered it to the alpha-one in Bachu+Kalidindi1998... By now, it seems that some groups use alpha, others beta approach.
introduced two new absolute tolerance values for "shears" and "twinFrac" (default 1e-6).
2012-10-22 14:55:07 +00:00
2be331b74d
In crystallite for state integrators 2 and 3: now that "stateJump" is called before integrating dotState, we have to do state = state + dotState *dt instead of state = subState0 + dotState * dt; otherwise the deltaState is lost
2012-10-22 13:34:15 +00:00
0980920b66
In crystallite: for state integrators 2 and 3 the deltaState always has to be done at the beginning of the integration, not at the end; otherwise the stiffness calculation can be completely wrong, when the state is changed after the stress integration for the central solution.
...
Also changed some debugging levels in crystallite and mainly in constitutive_nonlocal
2012-10-22 07:59:35 +00:00
3ecaa9e371
modified multiplication term in order to mimic a discrete distribution of dislocation sources; namely, at high resolution, when there is (on average) less than one source per integration point, a random generator decides whether there is a source in the finite volume or not; if there is one, then the multiplication turns independent of the density and depends only on the velocity/volume times a scalar factor; recovers density*velocity/lambda for large finite volumes
2012-10-19 11:40:17 +00:00
36676029e1
for state integrator 2 (explicit euler) and 3 (adaptive 2nd order euler): don't do any state evolution during stiffness perturbation, but only stress integration, since for those cases the state is not restored after every perturbation step
2012-10-19 11:20:31 +00:00
b9f97ba5da
unified naming scheme, fixed a bug in the new basic scheme, and added a statistic file similar to abaqus to store the information on needed cut backs and iterations for each inc
2012-10-19 08:44:21 +00:00
6230dacbac
only first broken ip signals "terminally ill"
2012-10-18 13:48:06 +00:00
4a6e08bb69
changed keyword in spectral geometry file for multiplication of entries from "copies of" to "of"
2012-10-18 10:17:16 +00:00
dd5f453994
mainly cosmetics. added some comments. changed debug levels for some outputs. corrected (probably non-essential) check for NaN in FPI stressIntegrator.
2012-10-18 09:53:26 +00:00
79a5a30a90
removed now obsolete vectorproduct variables st, tt...
2012-10-18 07:25:49 +00:00
5f0440fde3
crystallite_integrateStress now raises an error if Fp becomes NaN
2012-10-17 16:19:42 +00:00
31f20e51da
just to be able to tell about the bug I found in the hex slip systems---which I actually forgot to mention during the last commit---I slipped in a syntax error that now is fixed, too...
2012-10-12 20:31:50 +00:00
05c5ea42d7
prepared loop distributions to hold "over shooters"
2012-10-12 18:00:55 +00:00
82a13af474
tidied up the Schmid matrix calculations.
...
added internal check against dilatation in Schmid matrices.
2012-10-12 17:59:50 +00:00
b20c612e25
added error "0" for internal (run time) checks failing
2012-10-12 17:55:23 +00:00
1b2edd7e7d
fixed error in _identity (wrong delta-function)
...
added _exp33 for matrix exponential
added trace33 for matrix trace
2012-10-12 17:54:20 +00:00
324dfda5a2
added comments (doxygen conform) to phenopowerlaw, added warning on specifying h0_sliptwin as it has no effect
2012-10-11 14:49:12 +00:00
e4054c116d
fixed problem with gnu compiler: allocation of variables in constitutive_nonlocal_stateInit was not safe when not using any nonlocal constitution
...
put header of debugging output in constitutive_init at the start of the function in order to make debugging easier
2012-10-09 12:34:57 +00:00
a84e0529c3
make correction of hardening coefficients thread safe
2012-10-05 16:05:51 +00:00
40a2e652e7
introduced material parameter "linetension", which indicates how strong the effect of the line tension on the hardening coefficients is
2012-10-05 14:42:41 +00:00
7cc6108a04
hardening coefficients for fcc are density dependent (line tension effect, Devincre, Kubin, Hoc; 2006; Physical analyses of crystal plasticity by DD simulations)
...
fixed bug with thermal annihilation producing negative density in case of very small dipole density and high climb velocity
2012-10-04 18:08:40 +00:00
80465c0b49
moved option for UTF-8 encoding to spectral interface as this is now called before prec init.
...
if UTF-8 encoding is needed for FEM solver (old compilers might not support it), add the same statement to the corresponding interface routine
2012-10-04 14:22:39 +00:00
e2ea3cdff6
again some changes regarding creation of NaN, ieee-conforming way is not in the complilers yet.
2012-10-02 16:53:03 +00:00
bce8012c89
random distribution of initial dislocation density now really independent of meshsize
2012-10-02 15:26:58 +00:00
d5ce49c471
numerics got some protected statements and is now reading in the new keywords for the solver selection in small letters.
...
spectral solver got cut back facilities + improved output to screen
2012-10-02 15:26:56 +00:00
91b7883c2a
random distribution of initial dislocation density now independent of mesh size
2012-10-02 13:35:34 +00:00
1502a71f0c
added possibility to start with an initial random distribution of dislocation segments with specific overall density
2012-10-02 12:57:24 +00:00
0bcb8f59db
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 12:53:25 +00:00
6301787df4
moved the the variable cutBack from FEsolving.f90 (where it was not used at all) to the interface routines to make responsibility of cut back control clear
...
PLEASE RUN setup_code.py IF YOU DO MARC SIMULATIONS, THE INTERFACE HAS CHANGED
2012-10-02 12:46:58 +00:00
c8b7da432c
set debug_level to be protected as it is read-only for other modules
2012-10-02 09:35:39 +00:00
4c7bcb8df9
modified formated integer output and added error number in case maximum number of cutbacks is reached
2012-10-02 09:30:13 +00:00
9fc46b4950
added /echo/ statements
2012-10-02 08:12:53 +00:00
b99a846503
new scaling feature in numerics (unitlength) did not scale the reference coordinates in the first place; now this is taken care of in mesh.f90, so scaling should work properly
2012-09-25 16:21:58 +00:00
d0fd3c03c5
forgot to check in; belongs to rev 1762
2012-09-24 16:22:25 +00:00
912277d1ed
substituted the call to the flush subroutine with the intrisic flush(6) function
2012-09-24 12:10:28 +00:00
8336d0705c
new numerics parameter "unitlength" that scales the model size in DAMASK; this enables to use very small models in marc without getting any numerical problems for example with contact which does not seem to work when using very small numbers
2012-09-24 06:13:26 +00:00
b587bffdd5
added some 'protected' statements to variables that shouldn't be changed by other modules
2012-09-22 16:49:41 +00:00
8ed69170c5
corrected wrong warning complaining about FFTW string when DAMASK_NUM_THREADS undefined
2012-09-14 16:39:42 +00:00
1cfc467705
added new cut back parameter for spectral solver and instrumented variables for use with doxygen
2012-09-13 09:48:38 +00:00
b9a2890665
fixed bug in loadcase rotation: when not specifying "deg" the rotation was reset to 0,0,0..!
2012-09-06 14:05:28 +00:00
29023cea3c
minor correction of debugging output
2012-09-05 11:19:46 +00:00
330d71864e
fixed bug with stress BC handling
2012-09-05 08:30:15 +00:00
f153866030
introduced factor to control edge contribution to multiplication;
...
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
22812c9a91
some minor improvement on precision detection: checking only once (in prec and no longer in math and crystallite), added one more 4/8 switch for LAPACK, as there is no single precision FFTW, stopping compilation for spectral method if FLOAT=4
...
new function in IO to print integers without leading zeros, implemented it at some places in the new spectral solver (reporting still needs some serious polishing)
updated preprocessing for documentation to handle precision correctly
2012-08-30 20:26:28 +00:00
299d9e6bc4
fixed bug in seed initialization that didn't allow to redo calculations that started with a random seed. Now the whole random seed array is set to one value, previously only the first one was reported and the remaining ones were random
...
removed old random function used by halton
2012-08-30 14:58:30 +00:00
d80b45c1d9
added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
...
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
8e3b547cbd
changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
...
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
84e3f94424
added flush for easier debugging
2012-08-29 15:23:43 +00:00
d83150be1b
now capturing "terminallyIll" for basic solution, should end in a automatic cutback of time steps for the spectral solver
2012-08-29 05:50:42 +00:00
3106b8ce0c
corrected definition of integer type for gfortran
2012-08-29 05:19:35 +00:00
d089c12947
abaqus seems to have similar problems with the openmp lib as marc (use module vs. include file), i hope this fixes the crashes
2012-08-28 19:48:38 +00:00
5e9e8497e6
new solver is now compiling without a PETSc installation, however only the plain basic solver is available then.
...
also removed reporting of PETSc related variables in the case it is not installed/found
2012-08-28 19:19:47 +00:00
0f64289d75
fixed bug causing trouble with ifort 11 (abaqus)
2012-08-28 19:10:54 +00:00
0959ff3299
substituted hand written matrix inversion by LAPACK version with precision selection.
...
also introduced check for inversion into DAMASK_spectral_Utilities.f90 for the stress BC calculation. This part is further improved by using 5% of the reference stiffness to avoid trouble in the fully plastic regime (where the stiffness is underestimated)
Test for Marc 2010 is updated because the new inversion give slightly different results near 0 (order of e-13)
2012-08-28 16:59:45 +00:00
73349d02f5
merged precision info into the file prec.f90 and removed prec_single.f90
...
precision information is now parsed as a makro, defined by the compiler, eg. -DFLOAT=8 for 8 byte long floats or -- in case no values is given -- for the FEM wrapper by the interface files.
Please don't forget to run setup_code.py !!!!!!!!!!!
abaqus_v6.env is adjusted to specify the standard precision (float=8, int=4) and got some extra compilation options, some deprecated warning supressors are removed
Optional Marc modification will follow that allow automatic selection of suitable precision
2012-08-28 16:08:17 +00:00
f3e7b3cec8
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:31 +00:00
aa380dcb08
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:22 +00:00
efd1b513cf
fixed bug in divergenceFDM
2012-08-27 15:43:17 +00:00
9214da4465
added missing labels to list of available outputs
2012-08-27 12:41:57 +00:00
96ba5ecae4
moved some more 'mesh related' functions for post processing from math.f90 to mesh.f90
...
f2py functions remaining in math.f90 now uses assumed size arrays in order to have simpler interfaces. This is only working with python 2.7!
changed python pre- and postprocessing scripts.
If you encounter any problems whith core modules, try to remove the old core.so in the lib/damask
2012-08-27 08:04:47 +00:00
55a5112f36
added comments for doxygen documentation
2012-08-25 11:46:36 +00:00
e335222bd0
added constitutive none to abaqus files
2012-08-24 19:21:39 +00:00
405c3765bd
fixed bug in fiber texture component caused non-even distribution by correctly getting numbers of the halton sequence
2012-08-24 13:27:55 +00:00
3cd5fa90e8
corrected dislocation multiplication term for special case of zero density
2012-08-24 11:36:46 +00:00
4f67d04c69
new parameter "significantRho" for nonlocal constitutive law ; density below this value will hardly contribute to dislocation glide or any dislocation reaction ; old parameter "absoluteToleranceRho" is now used only for its initial purpose, namely the absolute tolerance in the state integration
2012-08-23 05:48:21 +00:00
222aed9f60
derivative of velocity with respect to resolved stress was flawed; now much better convergence of stress integration for nonlocal constitutive law
2012-08-21 14:40:01 +00:00
ad7381cfdd
maximum relative step length in stress integration cannot decrease below 1
...
intermediate tensor "A" is calculated only once before the Lp loop in "integrateStress"
2012-08-21 08:53:36 +00:00
35dffd52c1
now using spectral_quit (like old spectal solver, needed because of f2py)
2012-08-20 13:22:34 +00:00
b96df9987e
fixed reading/writing of integer arrays with function for real arrays
2012-08-16 14:55:23 +00:00
453c6031a7
added functions for reading values of integer data type to binary file, corrected comment on old versions which are for real (pReal) only
2012-08-16 11:57:15 +00:00
b2aacf9ca4
rates in constitutive_results are taken directly from last converged step and not calculated again; added output of rates for annihilation of screws and deposition of edge jogs on collinear system
2012-08-16 11:03:22 +00:00
bd754dbefd
corrected debug output of evolution rates; added possibility to change the safety factor for the CFL flux condition via the material.config file; updated the example material.config due to recent changes in nonlocal constitutive
2012-08-16 09:13:38 +00:00
0434ef3daa
some comments to be seen in documentation
2012-08-15 13:38:38 +00:00
c2c31a0a59
added SolverBasicPETSC module to the new FFT solver (solves the basic scheme using PETSc when mysolver = basicpetsc in numerics.config)
...
some bug fixes
2012-08-14 16:58:23 +00:00
f5e7d576f1
introduced annihilation of screw dipoles; so far no thermal activation, but immediate annihilation; each annihilated screw dipole leaves behind an edge jog of same length as the dipole height on the collinear system
2012-08-14 12:26:20 +00:00
c1c5941733
stressAndItsTangent:
...
when winding forward to last substep in increment, also do the calculation if this substep is below "subStepMinCryst";
output of "wind forward" and "cutback" info only for crystallites that are still "todo"
integrateStress:
maximum component in Lp determines absolute convergence criterium:
aTol = max(maxLpComp * rTol_fromConfig , aTol_fromConfig)
this ensures that small values in Lp do not spoil the convergence, similar to the effect of the relevantStrain parameter before (not needed anymore in the stress integration)
2012-08-14 12:07:59 +00:00
eae9a34c6b
corrected debugging output: extreme values of returned stress and jacobian belong to cpfem debugging, not homogenization
2012-08-14 11:48:43 +00:00
259eb7850e
more work on array ordering in new solver. (now working but not tested)
2012-08-10 17:01:58 +00:00
cd0da03ebc
changed comments to doxygen style
2012-08-10 15:58:17 +00:00
08c7be7d15
adaptive regrid now working, updates F and F_lastInc based on mapping.
2012-08-10 15:48:27 +00:00
b324a98014
changed order of most arrays to fortran-fast, whole new solver still work in progress
2012-08-09 13:04:56 +00:00
fe4d4d9525
changed comments in prec and IO to be read by doxygen, fine tuned output of doxygen and added precompilation for documentation
2012-08-09 11:01:53 +00:00
d0933dad7b
added filter option to the spectral solver to mitigate spurious oscillations due to gibb's phenomenon. activate by setting myfilter in config file appropriately (currently only 'none' and 'cosine' options coded). more cleaning up of AL code
2012-08-07 17:23:13 +00:00
925915e30d
some cleaning up
2012-08-07 12:02:57 +00:00
32f8c9c6ea
moved petsc option string to numerics and added new numerics parameters to config file
2012-08-06 17:27:53 +00:00
93658c72db
set auto values back to auto
2012-08-06 12:44:07 +00:00
7e3a837640
moved calculation and output of geometry related data to mesh.f90, moved output of command line related information to DAMASK_spectral_interface.f90.
...
improved new solver structure (use with make SOLVER=NEW)
2012-08-06 12:43:05 +00:00
a48d180f8c
allow prefactor for self-diffusion to be equal to zero
2012-08-06 09:03:33 +00:00
e2a2621235
updates for AL version of spectral solver
2012-08-06 08:53:12 +00:00
e8df3678aa
added possibility to assign the transmissivity of grain boundaries a fixed value by use of the keyword "grainboundaryTransmissivity" in the material.config; grain boundaries are identified as interfaces between areas of different material_texture
2012-08-03 14:32:49 +00:00
948d9c03d0
new version of modular solver structure
2012-08-03 09:25:48 +00:00
3ffba037d4
Reading of euler angles from the loadcase corrected.
2012-08-02 17:52:07 +00:00
740357172a
Reading of Euler angles from the loadcase corrected.
2012-08-02 17:46:50 +00:00
ee1bde0cd7
enabling regridding more than once by introducing deallocation of arrays
...
added J2 test (stub from Taymour)
2012-07-31 15:37:49 +00:00
5a89c783d4
deallocating already allocated arrays in case of regridding/restarting (i.e. when calling init more than once)
2012-07-31 14:00:15 +00:00
991a7bbd2d
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 15:51:48 +00:00
d4163dd16f
further work on modularization, basic scheme is now calculating the same results as DAMASK_spectral.f90
2012-07-30 14:06:22 +00:00
c341ddd855
more modularization….
2012-07-26 13:58:47 +00:00
4ed68bb4ae
next round in modularization
2012-07-25 14:01:39 +00:00
e1faad8bcf
next round in modularizzation of solvers
2012-07-24 17:07:10 +00:00
882c44a61d
changed the majority of debugging output to level "extensive"
2012-07-24 15:29:23 +00:00
15c5131874
corrected formulation of maximum height of screw dislocation dipoles
2012-07-24 14:50:11 +00:00
9c0a161ec0
in case of regridding, undeformed configuration is written out correctly. Restart improve by reading in additional data from converged step.
2012-07-24 12:21:41 +00:00
c4c00f04f4
no dipole formation by stress decrease;
...
dipole dissociation rate proportional to "deltaDipoleLimit / oldDipoleLimit", not "deltaDipoleLimit / newDipoleLimit"
2012-07-24 06:57:37 +00:00
3d59fec305
further modularisation of spectral solver (only for basic scheme so far)
2012-07-23 10:12:31 +00:00
bd9e81fbec
intermediate, not working state of new solver structure
2012-07-20 15:33:13 +00:00
ad3f9d8050
removed old standalone AL solver and introduced new structure for solver zoo
2012-07-19 17:24:56 +00:00
7d4ff278cb
worked on the restart capabilities
2012-07-19 14:16:59 +00:00
13caf2d389
made linear shape reconstruction working again, pretty similar results like corrected FFT reconstruction
2012-07-18 18:39:59 +00:00
a22163c2ae
reverted unwanted commit of Makefile
2012-07-18 12:34:46 +00:00
95d292b286
2012-07-18 12:31:07 +00:00
7c6fc121fd
condensed error reporting for constitutive_XYZ_init
...
removed erroneous check for structure>3
2012-07-17 17:36:24 +00:00
0fdd43b54b
minor clarification of file content and its use
2012-07-05 10:02:20 +00:00
4d09ef0648
changed variable name "debug_what" to "debug_level"
2012-07-05 09:54:50 +00:00
b69f446caa
added constitutive_none
...
added wrongly deleted "endif" statements
removed tmglib and refblas from linker command for lapack (Koen??)
xxxROOT is changed by setup_code unless commented-out... So had to delete '#' again.
2012-07-03 13:59:38 +00:00
aeb1e18268
passing of multiple make options possible now
2012-07-03 13:57:05 +00:00
7f10ab0996
corrected to consistent naming: "IMKL"
...
restored xxxROOT to commented-out auto entries.
commented-out currently unused PETSC parts.
added "refblas" and "tmglib" to LAPACK library inclusion (seems to be necessary since 3.2.1).
2012-07-03 12:36:54 +00:00
823013d485
new plasticity: none
...
see material.config for necessary parameters (lattice_structure, elastic constants)
2012-07-03 11:16:38 +00:00
b4103b205d
parts of the material.config can now be set to echo their content back into the log-file (i.e. STDOUT / unit 6)
...
use keyword "/echo/" before first section in the respective parts that you want to see echoed back into the log file.
2012-06-26 10:24:54 +00:00
767842acbf
now real time monitoring of DAMASK_spectral output to screen
...
working with GNU Fortran as well (new checking for return code)
2012-06-25 09:03:19 +00:00
0606845f15
reordered calculation of current stiffness to enable restarting with different resolution
2012-06-22 09:20:23 +00:00
bd462d12c6
fixed some bugs in the regridding routine
2012-06-20 18:33:20 +00:00
d650972904
corrected some bugs concerning the regridding
...
prevented FEsolving from potentially write to a none existing file
started to introduce petsc into the make chain (nothing happens if PETSC_DIR is not set)
2012-06-20 12:49:46 +00:00
f5eb8fcb25
fixed bug caused by the inconsistent sequence of slip and twin systems
2012-06-19 16:06:25 +00:00
481268c8c2
fixed closing of file (unit 222) statement in FEsolving.f90
...
added missing keyword in mesh.f90 with ifndef Spectral statement (needed for Marc and Abaqus)
2012-06-19 14:33:24 +00:00
06be437bc9
added minRes to regridding function and writing out of new geometry file
...
updated f2py wrapper to enable the use of init functions.
added 2 new error messages to io
2012-06-19 13:31:15 +00:00
8537e87b7e
added shell scripts to run tests from crontab, improved numbering in spectral compile tests and added some first files for testing restart capabilities of spectral solver.
...
added configuration file for generation of code documentation using doxygen
restart of spectral solver is fixed and seem to work now also for restart at significant deformation.
spectral solver now gives exit code 2 if some increments did not converge
2012-06-18 15:27:01 +00:00
d9c6f9e134
switch on restartRead logical when requested by "--restart" cmdline switch
2012-06-18 09:27:36 +00:00
380f40561b
first calculation of Tstar still used hard coded Hooke, now usese constitutive_TandItsTangent(...)
2012-06-18 07:26:34 +00:00
b2fd3e1180
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only.
...
Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver.
Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile.
Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 16:10:21 +00:00
eb39d332bd
ULTRA OPTIMIZATION wasnt working anymore, seems to be related to Bertholds update of ws12 and ws13. had to remove -static from optimization string to be able to link again. Added some support for IKLM, but this didn't solve the problem
2012-06-13 17:19:16 +00:00
3ef17c208b
set default lapack to lapack instead of acml, added definition of makro for spectral solver for later use in preprocessor
2012-06-13 13:45:58 +00:00
052b526bde
made compilation of spectral code a command line switch and removed interactive question
2012-06-13 13:42:00 +00:00
7754416b35
now both getSolverJobName and getSolverWorkingDirectoryName use unit 5!
2012-06-13 09:58:06 +00:00
d3d0cfdab1
common blocks from 2012
...
updated setup to also create DAMASK_marc2012.f90
2012-06-13 07:30:27 +00:00
a5c27f22ca
now uses unit 5 for file name inquiery (unit 6 points to stdout in 2012, might be a bug though)
2012-06-13 07:28:43 +00:00
5b7f2e122e
fixed usage of OpenMP function library
2012-06-12 09:44:05 +00:00
fc7b4d6471
new function stateJump, which takes care of immediate changes in the state (deltaState); this introduces discontinuities in the state evolution; therefore this is always and only once done after each integration step, so no evaluation of deltaState for intermediate steps of e.g. the Runge-Kutta integrator; otherwise integration becomes a pain without significant gain in accuracy
...
deltaState now successfully tested for nonlocal model; was not correct for integrators 1,4,5 before
2012-06-06 15:11:30 +00:00
fa7f9866df
removed phase contrast/preconditioning
...
added information on itmin in output, impoved output
set exit code to 0 on successful termination (seems to be unix standard)
exit codes:
0: successful termination
1: error (using IO_error)
2: require regrid
updated the AL solver, still VERY experimental
2012-06-05 16:34:20 +00:00
4b6800b89a
removed some unwanted open statements when writing out the sizeState
2012-06-05 13:13:33 +00:00
01522cf6f2
check for valid elasticity model
...
improved error message in case of unknown elaticity/plasticity model
2012-06-02 14:23:28 +00:00
3af9165b08
useless debugging inforomation (asking for elastic moduli output) is removed
2012-05-31 09:25:04 +00:00
145d971d7e
added some debug output
2012-05-30 08:05:36 +00:00
5cc73a15a9
small correction in debug output
2012-05-30 07:41:22 +00:00
0127828f70
corrected initialization order
2012-05-29 15:08:18 +00:00
e1c5671e1f
relaxed error message triggering such that purely elastic calculations and more than one constitutive instance using hex lattice are possible. no twinning possible if no slip system exists
2012-05-24 14:08:48 +00:00
1003cfa7f8
added missing space in makefile, made removing of old files in Makefile silent and updated files for tests to current versions
2012-05-23 18:08:34 +00:00
c607441717
(likely) fixed a bug in the FFT-based geometry reconstruction. For (hopefully) correct math see Appendix B in paper.
2012-05-22 18:35:15 +00:00
bbf790a0a5
Input parameter 'QedgePerSbSystem' which denotes activation energy for each shear band system is added
2012-05-22 16:10:28 +00:00
9201133913
activated keyword expansion
2012-05-22 12:45:37 +00:00
cec3357e8f
corrected bug causing wrong element construction when using spectral solver. Also improved error messages for invalid resolution, dimension, and homogenization.
2012-05-21 09:06:02 +00:00
20f203f799
allow minimum stable dipole height equal to zero; ensure that maximum stable dipole height is not smaller than the minimum value
2012-05-20 13:57:35 +00:00
5b02d4e8eb
dipole dissociation and formation by change in stress as new mechanism in deltaState; had to add dipole height to state variables, which is however updated by deltaState instead of microstructure; alternatively microstructure had to know the current stress state
2012-05-18 14:35:52 +00:00
4da6907648
moved remobilization of dead dislocations from dotState to deltaState
2012-05-18 13:35:44 +00:00
a5c1624648
check for invalid mesh type once in constitutive_init and not every time constitutive_nonlocal_dotState is called
2012-05-18 13:15:23 +00:00
8c849d62ee
small corrections for how to treat the new deltaState in FPI and euler integration; all integrators successfully tested with j2
2012-05-18 13:00:15 +00:00
abbae76c51
instantaneous jumps in the state by constitutive_deltaState are now incorporated for all state integrators. still they (should) not influence the result, since all constitutive laws simply return zero for the deltaState
2012-05-17 15:25:21 +00:00
351c2c6e65
deltaState depends on the current state, no the state at the beginning of the timestep
2012-05-17 12:18:30 +00:00
f6d5efeed3
removed arguments Fe and Fp from collectDeltaState function call
2012-05-17 11:04:22 +00:00
a54439e3b5
dotState does not have to be reset to zero. this is a remnant from older versions when the dotState for the nonlocal model used to be updated by the neighboring integration point
2012-05-16 15:35:14 +00:00
84d4652a07
all constitutive modules now contain a new function "deltaState", which in the future allows to have an instantaneous and incremental change of the state (additional to the rate based evolution with dotState).
2012-05-16 14:43:26 +00:00
df2d520630
stripping abaqus comments is now aware of damask comments
2012-05-15 14:59:26 +00:00
701cf2e71b
replaced duplicated math entry by missing mesh entry
2012-05-15 14:58:47 +00:00
0d745adfa0
corrected NaN in prec_single.f90 (was already silent but with typo), polished output and added switch in order to check range on all files except of prec.f90 (in which NaN is defined)
2012-05-11 12:46:17 +00:00
7ee368f324
check whether there is any constitutive output
2012-05-11 07:38:20 +00:00
f8f9c089d6
check for NaN in math_QuaternionInSST
2012-05-11 07:37:32 +00:00
babf2647fb
use non signaling version of NaN
2012-05-11 07:35:52 +00:00
ce83026965
corrected bug in fft based geometry reconstruction causing mirrored geometries
2012-05-09 14:56:25 +00:00
d11aa15a67
changed indices counting (fortran to python style, easier division to get rid of periodic copies)
...
corrected f2py pyf file
2012-05-09 10:09:56 +00:00
fbd075dc6e
corrected automatic determination of resolution
2012-05-08 15:12:43 +00:00
c752dd5474
regridding is now working, changed the subroutine into a function
...
changed order of arrays in nearest neighbor search to make it fortran fast
constitutive.f90 and homogenization.f90 write state size out during initialization
setup/setup_processing.py is using byterecl to be compatible with binary files written out by solver
2012-05-08 14:57:06 +00:00
a9a72cee97
fixed bug in nearest neighbor search, corrected error message for kdtree2.f90
2012-05-08 13:16:59 +00:00
eb8265b914
fixed potential division by zero error discovered by our American friends
2012-05-08 07:16:00 +00:00
bdc46a8828
using better measure (norm) of phase contrast for preconditioning
2012-05-07 08:12:13 +00:00
4b18278781
reworked neares neigbor search subroutine, now also works for voronoi tesselation (general nn search in periodic cell)
2012-05-04 13:07:37 +00:00
863f0c766e
removed line continuation causing trouble
2012-05-04 08:19:12 +00:00
b4775249e8
corrected standard check to make f2py working with gfortran
2012-05-03 17:12:36 +00:00
26c6063a2c
utf8 encoding output to screen now for all solvers using intel ifort>10 or any gfortran (old versions might not support it, but we don't use them anyway)
2012-04-28 10:46:41 +00:00
dbeac18df6
no more dropping of comments in Abaqus input file assembly
2012-04-27 14:33:39 +00:00
83e89fba3c
improved regridding, especially interfacing to python (also for nearest neighbor search)
2012-04-24 17:02:27 +00:00
e33c34d86b
corrected wrong integer arithmetics in calculation of coordinates in DAMASK_spectral.f90
2012-04-24 16:59:38 +00:00
83e22c00a2
added missing allocation of slopeLnRate array.
...
changed parsing to lowercase name.
2012-04-20 12:18:38 +00:00
d2c4874db3
several small corrections/polishing
2012-04-20 11:58:41 +00:00
c889d20ba0
added simple preconditioning to improve convergence for high phase contrast materials in standard algorithm
2012-04-20 09:42:57 +00:00
caff3124fd
changed multiplier keyword from "times" to "copies of" to prevent ambiguity.
2012-04-17 10:05:49 +00:00
dbc5a3a3ce
subnodeparent check is now running only over actual number (not max) of parent nodes...
2012-04-17 09:19:44 +00:00
f905a97cdf
fixed bug (causing sigsev) concerning new functions mesh_spectral_get***
2012-04-12 08:03:08 +00:00
8c559cbdc9
fixed bug concerning file handling.
2012-04-11 18:46:36 +00:00
37fa6c2e14
merged code for python and spectral solver interfacing (shared most of it anyway).
...
put functionality for getting header information (dimension, homogenization, resolution) in functions in mesh.f90
2012-04-11 17:28:08 +00:00
a18e5e48dc
added 'times' keyword in function for continuous int values: "4 times 1 => 1 1 1 1", mainly for geom files of spectral solver.
...
corrected name for contin"U"ousIntValues functions
2012-04-11 17:24:50 +00:00
91cfd21c88
corrected some copy and paste errors
2012-04-11 14:12:30 +00:00
9a92d343dc
added Onurs modified description for tausat in j2 law.
...
Polishing phenopowerlaw
2012-04-11 14:01:02 +00:00
f2da887899
added missing ":" in mesh.f90, introduced absolute stress tolerance for spectral solver in numerics.config/numerics.f90
2012-04-11 12:57:25 +00:00
f20cecd421
integrated subroutine for regridding into mesh.f90 and made it available for python
2012-04-10 15:15:46 +00:00
d638c563af
reworked python - fortran interfacing
2012-04-10 13:30:34 +00:00
b17740c9c3
corrected misplaced line for linear guessing
2012-04-06 14:23:06 +00:00
79592d2f0f
get debug info for spectral solver as well
2012-04-05 09:17:09 +00:00
990f547091
improved AL solver, now using guesses for P(x) to improve performance. Changes (and whole solver) still experimental
2012-03-31 12:41:46 +00:00
91a70b0fb3
before turning terminally ill report at which g,i,e crystallite did not converge
2012-03-30 13:16:45 +00:00
c29ae95af7
new version of AL spectral solver (seems to work, but still experimental)
...
new concept of DAMASK for Python: Now using also IO.f90, debug.f90 etc. instead of mimicing their necessary function. This needs DAMASK_python.f90 and DAMASK_python_interface.f90 (At the moment more or less copies of respective spectral files).
polished and renamed the scripts for converging ang files
renamed voronoi_randomSeeding.py to spectral_randomSeeding.py
2012-03-29 19:54:31 +00:00
17826d7c98
now initializing planner flag for fftw with useful value even if init wasn't executed
2012-03-26 10:03:39 +00:00
7947ae36b3
changed default value of err_div_tol
2012-03-22 10:33:54 +00:00
00de182873
corrected if statement to check assembly of input files
2012-03-22 07:44:46 +00:00
44d8282863
corrected reading in of ABAQUS debug modes and made numbering scheme for debugging depending on variables hoping to prevent these errors in debug.f90
...
Put all (now public) logicals in FEsolving.f90 again into one specification statement
2012-03-21 18:04:52 +00:00
15dd860de9
new switch "SOLVER", set it to SOLVER=AL to compile the Augmented Lagrange version of the spectral solver
2012-03-21 18:01:25 +00:00
131c9ac93e
dPdF calculations made consistent with constitutive_TandItsTangent
2012-03-21 15:00:36 +00:00
8a2f2c5a95
stress iteration loop now uses generalized elasticity by calling TandItsTangent
...
the anlalytical tangent calculation should now be adopted to also use TandItsTangent
2012-03-21 10:57:27 +00:00
8d8a8103eb
lastIncConverged, outdatedByNewInc, and cutBack need to be public as well!
...
please keep in mind the FEM interfaces which also need to work!!!
2012-03-21 07:51:07 +00:00
dbdc7ddfa2
debug.config, debug.f90, DAMASK_abaqus_exp.f, DAMASK_abaqus_std.f: changed to new debug scheme (wasn't working)
...
lattice.f90, FEsolving.f90: explicitly defined public functions and variables, all others are now private
numerics.f90: changed output format of real numbers, now instead of 0.1eX 1.0e(X-1) is printed to screen
Makefile: now using correct Optimization flags for OPTIMIZATION=AGGRESSIVE
DAMASK_spectral_AL.f90: improved, but still testing. Stress BCs now seem to be handled correctly
2012-03-20 18:01:31 +00:00
04d83ec9cd
added "-assume byterecl" in Makefile for ifortran to specify with "recl=" the size of the file in bytes instead of 4byte chunk when opening files. (same as in gfortran per default).
...
no important changes in other files
2012-03-20 12:26:21 +00:00
012d568cf8
slightly restructured divergence debug output
2012-03-19 16:41:55 +00:00
632d57cc31
corrected div calculation regarding dimension and resolution
2012-03-19 13:19:15 +00:00
5263366615
adding switch in material.config for short range stress correction
2012-03-15 14:58:12 +00:00
7330031579
corrected special treatment of periodic images in calculation of stress correction
2012-03-15 10:08:08 +00:00
d4463fe56a
shifted location of elasticity part closer to plasticity... (constitutive has been shaken back and forth quite a bit today ;-] )
2012-03-15 09:51:33 +00:00
ea634d978a
adapted comments to recent change
2012-03-15 09:47:32 +00:00
b7fc4fe6e4
fixed one last typo, now it finally compiles, sorry for this!
2012-03-15 09:42:33 +00:00
4d90d90886
last comment also holds for this one
2012-03-15 09:25:15 +00:00
70a44fbbdd
constitutive models need to skip new keyword elasticity when reading their arameters
2012-03-15 09:22:24 +00:00
503f6ed040
i think it's elasticity not elaticity, right?
2012-03-15 08:46:51 +00:00
36edb4dd9f
introduced keyword elasticity in material.config
...
added constitutive_TandItsTangent and special version constitutive_hooke_TandItsTangent
those are however not yet used and need to be tested
2012-03-14 16:16:11 +00:00
9cbbb7cab5
Dead dislocations are treated the same as mobile dislocations for the flux part though they do not contribute to slip. By that the pileup of dead dislocations is able to diminish with time (kinetics are the same as for the glide part; this is not correct but gives valuable results). Also remobilization of dead dislocations at neighbor is taken into account for flux.
2012-03-14 15:32:50 +00:00
6bca2150f2
local stress correction of gradient in dead dislocations and neighboring excess density is additive
2012-03-14 15:24:19 +00:00
06c93435f2
viscosity term in kinetics law proportional to resolvedstress minus forest term
2012-03-14 15:18:36 +00:00
c2f5cebacb
simplified analytic jacobian calculation. removed Lpfrac, time_sensitive. introduced rate_sensitivity flag when calling crystallite_stressAndItsTangent that is currently set to .false. and is to be set according to which dPdF the FE solver is asking for
2012-03-14 13:56:50 +00:00
2b5ed4ab93
corrected name of makefile (first letter upper case)
2012-03-14 11:58:05 +00:00
d2652cae47
multiplication only controlled by screws
2012-03-13 14:19:36 +00:00
433d8a338c
missed several occurences of constitution
2012-03-12 14:43:19 +00:00
c9ed989dad
replaced keyword constitution with plasticity in preparation of upcomming generalized elasticity
2012-03-12 14:09:37 +00:00
efd653fb00
removed old *.output* and *.spectralOut as they are not updated anyway from reference.
...
introduced a numbering scheme for variants
calculated new reference results due to slight changes
2012-03-09 16:30:42 +00:00
ac5dd14c5f
removed some small bugs in IO.f90 (related to initialization of variables)
...
DAMASK_spectral.f90 adopted to new debug scheme, substituted print with write statements
2012-03-09 15:22:52 +00:00
bd9667bd4b
added new, flexible debugging scheme.
...
now all modules have their own debug specification.
compiles and runs, I hope nothing is broken
did a lot of polishing
2012-03-08 20:25:28 +00:00
dec9451b1e
first draft of the Augmented Lagrangian based algorithm, still experimental
2012-03-07 17:37:40 +00:00
2a7888c7e1
removed (in IO.f90) a dangerous initialization statement.
...
Please read http://www.cs.rpi.edu/~szymansk/OOF90/bugs.html#4
for more details.
Other files are just a little bit polished
2012-03-07 10:07:29 +00:00
d00c3c9e19
added error for to IO to substitute stop statement in kdtree2
...
explicitly defined all functions in as either public or private in the modules to have a quick overview on all functions and parameters that are available
2012-03-06 14:52:48 +00:00
17e9698659
added time_sensitive flag to ignore or add time sensitive component to analytic jacobian (should be close to perturbed jacobian when ignored)
...
now uses sub_dt for analytic jacobian calculations
bug fixes
2012-03-01 19:42:43 +00:00
df03dee91c
improved readability, removed archive statements. With new option FASTBUILD=YES build without any warnings etc
2012-03-01 19:34:42 +00:00
211f66a728
added elastic stiffness matrix as crystallite output
2012-03-01 13:06:09 +00:00
040e244993
Added stress-order terms to analytic stiffness
2012-02-27 17:40:28 +00:00
99d6dcecb5
fixed bug in calculation of analytic jacobian (should work much better now). parallelized analytic jacobian calculation loop
2012-02-24 14:07:46 +00:00
f2ee67d03d
disabled multi file optimization when setting OPTIMIZATION=OFF and improved comments on compiler switches
2012-02-24 13:38:15 +00:00
1042ac018f
output values used for Lp_frac and analyticJaco
...
improved comment for Lp_frac on numerics.config
2012-02-24 08:21:18 +00:00
478a6d110c
mixed things up, did not want to commit constitutive_nonlocal.f90 but rather DAMASK_spectral.f90!!!!
...
did a lot of polishing on constitutive_nonlocal.f90 (mostly checked in at last commit), for changes on DAMASK_spectral.f90 see previous message
2012-02-23 17:20:57 +00:00
a98832100f
introduced itmin parameter for spectral code for defining minimum number of cycles
...
removed simplified_algorthim flag because the basic scheme using the polarization field will not be implemented
introduced divergence_correction flag for making divergence criterion resolution-independent (still experimental and not set by default)
corrected output and restart frequency (now modulo on incs of current load case)
2012-02-23 16:43:17 +00:00
989a2b2d39
added default entries for Lp_frac and analyticJaco
2012-02-23 10:53:15 +00:00
28d654d61e
forgot to remove some print statements in previous commit
2012-02-22 20:22:54 +00:00
b9a82156c9
crystallite.f90: can now calculate analytic jacobian by setting analyticJaco = 1 in numerics.config
...
math.f90: added math_mul3333xx3333…
numerics.f90: to read in analyticJaco and Lp_frac
2012-02-22 20:11:09 +00:00
9bf5b9dc86
dotState=NaN enforces cutback, if evolution rates lead to negative densities
2012-02-22 16:08:22 +00:00
21db79ce25
automated copyright information seems to be very complicated, not working yet
2012-02-22 14:06:28 +00:00
e25f605838
still trying to add copyright information by keyword via svn
2012-02-22 13:56:03 +00:00
20fdd302d7
trying to add copyright information by keyword via svn
2012-02-22 13:47:39 +00:00
ca401292e7
2012-02-22 13:46:33 +00:00
ca59c9936f
trying to add copyright information by keyword via svn
2012-02-22 13:43:35 +00:00
b0e2707a94
trying to add copyright information by keyword via svn
2012-02-22 13:40:03 +00:00
d68a3d1869
added LF=UNIX to a bunch of files
2012-02-22 13:30:00 +00:00
d8ffc29236
again: adding pInt, removing redundant use statments, chang in dble to real(,pReal)
2012-02-21 16:31:37 +00:00
9dc730dea4
now getting path separator by counting slashes and backslashes in $PATH environment variable
2012-02-21 16:04:16 +00:00
79663a7f76
polishing: adding pInt, removing unused use-statements etc
2012-02-21 16:00:00 +00:00
23cda48709
cleaning up, removing includes not needed
2012-02-21 15:42:47 +00:00
87a83d82b7
changed assumed arrays (:) to properly defined ones (gfortran 4.7 was complaining) and remove use statements that are not needed
2012-02-21 15:39:36 +00:00
Martin Diehl