common blocks from 2012

updated setup to also create DAMASK_marc2012.f90
This commit is contained in:
Franz Roters 2012-06-13 07:30:27 +00:00
parent a5c27f22ca
commit d3d0cfdab1
3 changed files with 235 additions and 1 deletions

206
code/include/concom2012 Normal file
View File

@ -0,0 +1,206 @@
! common block definition file taken from respective MSC.Marc release and reformated to free format
!***********************************************************************
!
! File: concom.cmn
!
! MSC.Marc include file
!
integer(pInt) &
iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva, idyn, idynt,&
ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,&
ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,&
ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,&
itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,&
lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,&
icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,&
isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,&
ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,&
ncycnt, marmen , idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,&
ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,&
imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,&
kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,&
iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,&
ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush, istream_input,&
iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,&
iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout, igena_meth,&
magf_meth, non_assumed, iredoboudry, ioffsz0
integer(pInt) num_concom
parameter(num_concom=233)
common/marc_concom/&
iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva(60), idyn, idynt,&
ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,&
ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,&
ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,&
itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,&
lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,&
icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,&
isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,&
ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,&
ncycnt, marmen, idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,&
ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,&
imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,&
kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,&
iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,&
ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush , istream_input,&
iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,&
iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout,igena_meth,&
magf_meth, non_assumed, iredoboudry, ioffsz0
!
! comments of variables:
!
! ideva(60) - debug print out flag
! 1 print element stiffness matrices, mass matrix
! 2 output matrices used in tying
! 3 force the solution of a nonpositive definite matrix
! 4 print info of connections to each node
! 5 info of gap convergence, internal heat generated, contact
! touching and separation
! 6 nodal value array during rezoning
! 7 tying info in CONRAD GAP option, fluid element numbers in
! CHANNEL option
! 8 output incremental displacements in local coord. system
! 9 latent heat output
! 10 stress-strain in local coord. system
! 11 additional info on interlaminar stress
! 12 output right hand side and solution vector
! 13 info of CPU resources used and memory available on NT
! 14 info of mesh adaption process, 2D outline information
! info of penetration checking for remeshing
! save .fem files after afmesh3d meshing
! 15 surface energy balance flag
! 16 print info regarding pyrolysis
! 17 print info of "streamline topology"
! 18 print mesh data changes after remeshing
! 19 print material flow stress data read in from *.mat file
! if unit flag is on, print out flow stress after conversion
! 20 print information on table input
! 21 print out information regarding kinematic boundary conditions
! 22 print out information regarding dist loads, point loads, film
! and foundations
! 23 print out information about automatic domain decomposition
! 24 print out iteration information in SuperForm status report file
! 25 print out information for ablation
! 26 print out information for films - Table input
! 27 print out the tying forces
! 28 print out for CASI solver, convection,
! 29 DDM single file debug printout
! 30 print out cavity debug info
! 31 print out welding related info
! 32 prints categorized DDM memory usage
! 33 print out the cutting info regarding machining feature
! 34 print out the list of quantities which can be defined via a table
! and for each quantity the supported independent variables
! 35 print out detailed coupling region info
! 36 print out solver debug info level 1 (Least Detailed)
! 37 print out solver debug info level 1 (Medium Detailed)
! 38 print out solver debug info level 1 (Very Detailed)
! 39 print detailed memory allocation info
! 40 print out marc-adams debug info
! 41 output rezone mapping post file for debugging
! 42 output post file after calling oprofos() for debugging
! 43 debug printout for vcct
! 44 debug printout for progressive failure
! 45 print out automatically generated midside node coordinates (arecrd)
! 46 print out message about routine and location, where the ibort is raised (ibort_inc)
! 47 print out summary message of element variables on a
! group-basis after all the automatic changes have been
! made (em_ellibp)
! 48 Automatically generate check results based on max and min vals.
! These vals are stored in the checkr file, which is inserted
! into the *dat file by the generate_check_results script from /marc/tools
! 49 Automatically generate check results based on the real calculated values
! at the sppecified check result locations.
! These vals are stored in the checkr file, which is inserted
! into the *dat file by the update_check_results script from /marc/tools
! 50 generate a file containing the resistance or capacity matrix;
! this file can be used to compare results with a reference file
! 51 print out detailed information for segment-to-segment contact
! 52 print out detailed relative displacement information
! for uniaxial sliding contact
! 53 print out detailed sliding direction information for
! uniaxial sliding contact
! 54 print out detailed information for edges attached to a curve
!
!
! irpflo global flag for rigid plastic flow analysis
! = 1 eularian formulation
! = 2 regular formulation; rigid material present in the analysis
!
! jactch = 1 or 2 if elements are activated or deactivated
! = 3 if elements are adaptively remeshed or rezoned
! = 0 normally / reset to 0 when assembly is done
! ifricsh = 0 call to fricsh in otest not needed
! = 1 call to fricsh (nodal friction) in otest needed
! iremkin = 0 remove deactivated kinematic boundary conditions
! immediately - only in new input format (this is default)
! = 1 remove deactivated kinematic boundary conditions
! gradually - only in new input format
! iremfor = 0 remove force boundary conditions immediately -
! only in new input format (this is default)
! = 1 remove force boundary conditions gradually -
! only in new input format (this is default)
! ishearp set to 1 if shear panel elements are present in the model
!
! jspf = 0 not in spf loadcase
! > 0 in spf loadcase (jspf=1 during first increment)
! machining = 1 if the metal cutting feature is used, for memory allocation purpose
! = 0 (default) if no metal cutting feature required
!
! jlshell = 1 if there is a shell element in the mesh
! icompsol = 1 if there is a composite solid element in the mesh
! iupblgfo = 1 if follower force for point loads
! jcondir = 1 if contact priority option is used
! nstcrp = 0 (default) steady state creep flag (undocumented feature.
! if not 0, turns off special ncycle = 0 code in radial.f)
! nactive = number of active passes, if =1 then it's not a coupled analysis
! ipassref = reference ipass, if not in a multiphysics pass ipass=ipassref
! icheckmpc = value of mpc-check parameter option
! noline = set to 1 in osolty if no line seacrh should be done in ogetst
! icuring = set to 1 if the curing is included for the heat transfer analysis.
! ishrink = set to 1 if shrinkage strain is included for mechancial analysis.
! ioffsflg = 1 for small displacement beam/shell offsets
! = 2 for large displacement beam/shell offsets
! isetoff = 0 - do not apply beam/shell offsets
! = 1 - apply beam/shell offsets
! ioffsetm = min. value of offset flag
! inc_incdat = flag to record increment number of a new loadcase in incdat.f
! iautspc = flag for AutoSPC option
! ibrake = brake squeal in this increment
! icbush = set to 1 if cbush elements present in model
! istream_input = set to 1 for streaming input calling Marc as library
! iprsinp = set to 1 if pressure input, introduced so other variables
! such as h could be a function of pressure
! ivlsinp = set to 1 if velocity input, introduced so other variables
! such as h could be a function of velocity
! ipin_m = # of beam element with PIN flag
! jgnstr_glb = global control over pre or fast integrated composite shells
! imarc_return = Marc return flag for streaming input control
! iqvcimp = if non-zero, then the number of QVECT boundary conditions
! nqvceid = number of QVECT boundary conditions, where emisivity/absorbtion id entered
! istpnx = 1 if to stop at end of increment
! imicro1 = 1 if micro1 interface is used
! iaxisymm = set to 1 if axisymmetric analysis
! jbreakglue = set to 1 if breaking glued option is used
! iglstif = 1 if ddm and global stiffness matrix formed (sgi solver 6 or solver9)
! jfastasm = 1 do fast assembly using SuperForm code
! iwear = set to 1 if wear model, set to 2 if wear model and coordinates updated
! iwearcf = set to 1 to store nodal coefficient of friction for wear calculation
! imixmeth = set=1 then use nonlinear mixture material - allocate memory
! ielcmadyn = flag for magnetodynamics
! 0 - electromagnetics using newmark beta
! 1 - transient magnetics using backward euler
! idinout = flag to control if inside out elements should be deactivated
! igena_meth = 0 - generalized alpha parameters depend on whether or not contact
! is flagged (dynamic,7)
! 10 - generalized alpha parameters are optimized for a contact
! analysis (dynamic,8)
! 11 - generalized alpha parameters are optimized for an analysis
! without contact (dynamic,8)
! magf_meth = - Method to compute force in magnetostatic - structural
! = 1 - Virtual work method
! = 2 - Maxwell stress tensor
! non_assumed = 1 no assumed strain formulation (forced)
! iredoboudry set to 1 if contact boundary needs to be recalculated
! ioffsz0 = 1 if composite are used with reference position.ne.0
!
!***********************************************************************

28
code/include/creeps2012 Normal file
View File

@ -0,0 +1,28 @@
! common block definition file taken from respective MSC.Marc release and reformated to free format
!***********************************************************************
!
! File: creeps.cmn
!
! MSC.Marc include file
!
real(pReal) cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept
integer(pInt) icptim,icfte,icfst,icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,&
icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa
real(pReal) time_beg_lcase,time_beg_inc,fractol,time_beg_pst
!
integer(pInt) num_creepsr,num_creepsi,num_creeps2r
parameter(num_creepsr=40)
parameter(num_creepsi=18)
parameter(num_creeps2r=4)
common/marc_creeps/cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept(33),icptim,icfte,icfst,&
icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa
common/marc_creeps2/time_beg_lcase,time_beg_inc,fractol,time_beg_pst
!
! time_beg_lcase time at the beginning of the current load case
! time_beg_inc time at the beginning of the current increment
! fractol fraction of loadcase or increment time when we
! consider it to be finished
! time_beg_pst time corresponding to first increment to be
! read in from thermal post file for auto step
!
!***********************************************************************

View File

@ -6,7 +6,7 @@ import os,sys,string,re,damask
architectures = {
'marc': {
'parent': 'DAMASK_marc.f90',
'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011'],
'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011','2012'],
},
}