From d3d0cfdab1910aa9a051995ebcb6a1024be2d33d Mon Sep 17 00:00:00 2001 From: Franz Roters Date: Wed, 13 Jun 2012 07:30:27 +0000 Subject: [PATCH] common blocks from 2012 updated setup to also create DAMASK_marc2012.f90 --- code/include/concom2012 | 206 +++++++++++++++++++++++++++++++++++++++ code/include/creeps2012 | 28 ++++++ code/setup/setup_code.py | 2 +- 3 files changed, 235 insertions(+), 1 deletion(-) create mode 100644 code/include/concom2012 create mode 100644 code/include/creeps2012 diff --git a/code/include/concom2012 b/code/include/concom2012 new file mode 100644 index 000000000..5f3983b38 --- /dev/null +++ b/code/include/concom2012 @@ -0,0 +1,206 @@ +! common block definition file taken from respective MSC.Marc release and reformated to free format +!*********************************************************************** +! +! File: concom.cmn +! +! MSC.Marc include file +! +integer(pInt) & + iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva, idyn, idynt,& + ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,& + ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,& + ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,& + itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,& + lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,& + icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,& + isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,& + ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,& + ncycnt, marmen , idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,& + ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,& + imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,& + kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,& + iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,& + ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush, istream_input,& + iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,& + iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout, igena_meth,& + magf_meth, non_assumed, iredoboudry, ioffsz0 +integer(pInt) num_concom +parameter(num_concom=233) +common/marc_concom/& + iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva(60), idyn, idynt,& + ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,& + ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,& + ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,& + itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,& + lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,& + icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,& + isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,& + ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,& + ncycnt, marmen, idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,& + ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,& + imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,& + kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,& + iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,& + ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush , istream_input,& + iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,& + iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout,igena_meth,& + magf_meth, non_assumed, iredoboudry, ioffsz0 +! +! comments of variables: +! +! ideva(60) - debug print out flag +! 1 print element stiffness matrices, mass matrix +! 2 output matrices used in tying +! 3 force the solution of a nonpositive definite matrix +! 4 print info of connections to each node +! 5 info of gap convergence, internal heat generated, contact +! touching and separation +! 6 nodal value array during rezoning +! 7 tying info in CONRAD GAP option, fluid element numbers in +! CHANNEL option +! 8 output incremental displacements in local coord. system +! 9 latent heat output +! 10 stress-strain in local coord. system +! 11 additional info on interlaminar stress +! 12 output right hand side and solution vector +! 13 info of CPU resources used and memory available on NT +! 14 info of mesh adaption process, 2D outline information +! info of penetration checking for remeshing +! save .fem files after afmesh3d meshing +! 15 surface energy balance flag +! 16 print info regarding pyrolysis +! 17 print info of "streamline topology" +! 18 print mesh data changes after remeshing +! 19 print material flow stress data read in from *.mat file +! if unit flag is on, print out flow stress after conversion +! 20 print information on table input +! 21 print out information regarding kinematic boundary conditions +! 22 print out information regarding dist loads, point loads, film +! and foundations +! 23 print out information about automatic domain decomposition +! 24 print out iteration information in SuperForm status report file +! 25 print out information for ablation +! 26 print out information for films - Table input +! 27 print out the tying forces +! 28 print out for CASI solver, convection, +! 29 DDM single file debug printout +! 30 print out cavity debug info +! 31 print out welding related info +! 32 prints categorized DDM memory usage +! 33 print out the cutting info regarding machining feature +! 34 print out the list of quantities which can be defined via a table +! and for each quantity the supported independent variables +! 35 print out detailed coupling region info +! 36 print out solver debug info level 1 (Least Detailed) +! 37 print out solver debug info level 1 (Medium Detailed) +! 38 print out solver debug info level 1 (Very Detailed) +! 39 print detailed memory allocation info +! 40 print out marc-adams debug info +! 41 output rezone mapping post file for debugging +! 42 output post file after calling oprofos() for debugging +! 43 debug printout for vcct +! 44 debug printout for progressive failure +! 45 print out automatically generated midside node coordinates (arecrd) +! 46 print out message about routine and location, where the ibort is raised (ibort_inc) +! 47 print out summary message of element variables on a +! group-basis after all the automatic changes have been +! made (em_ellibp) +! 48 Automatically generate check results based on max and min vals. +! These vals are stored in the checkr file, which is inserted +! into the *dat file by the generate_check_results script from /marc/tools +! 49 Automatically generate check results based on the real calculated values +! at the sppecified check result locations. +! These vals are stored in the checkr file, which is inserted +! into the *dat file by the update_check_results script from /marc/tools +! 50 generate a file containing the resistance or capacity matrix; +! this file can be used to compare results with a reference file +! 51 print out detailed information for segment-to-segment contact +! 52 print out detailed relative displacement information +! for uniaxial sliding contact +! 53 print out detailed sliding direction information for +! uniaxial sliding contact +! 54 print out detailed information for edges attached to a curve +! +! +! irpflo global flag for rigid plastic flow analysis +! = 1 eularian formulation +! = 2 regular formulation; rigid material present in the analysis +! +! jactch = 1 or 2 if elements are activated or deactivated +! = 3 if elements are adaptively remeshed or rezoned +! = 0 normally / reset to 0 when assembly is done +! ifricsh = 0 call to fricsh in otest not needed +! = 1 call to fricsh (nodal friction) in otest needed +! iremkin = 0 remove deactivated kinematic boundary conditions +! immediately - only in new input format (this is default) +! = 1 remove deactivated kinematic boundary conditions +! gradually - only in new input format +! iremfor = 0 remove force boundary conditions immediately - +! only in new input format (this is default) +! = 1 remove force boundary conditions gradually - +! only in new input format (this is default) +! ishearp set to 1 if shear panel elements are present in the model +! +! jspf = 0 not in spf loadcase +! > 0 in spf loadcase (jspf=1 during first increment) +! machining = 1 if the metal cutting feature is used, for memory allocation purpose +! = 0 (default) if no metal cutting feature required +! +! jlshell = 1 if there is a shell element in the mesh +! icompsol = 1 if there is a composite solid element in the mesh +! iupblgfo = 1 if follower force for point loads +! jcondir = 1 if contact priority option is used +! nstcrp = 0 (default) steady state creep flag (undocumented feature. +! if not 0, turns off special ncycle = 0 code in radial.f) +! nactive = number of active passes, if =1 then it's not a coupled analysis +! ipassref = reference ipass, if not in a multiphysics pass ipass=ipassref +! icheckmpc = value of mpc-check parameter option +! noline = set to 1 in osolty if no line seacrh should be done in ogetst +! icuring = set to 1 if the curing is included for the heat transfer analysis. +! ishrink = set to 1 if shrinkage strain is included for mechancial analysis. +! ioffsflg = 1 for small displacement beam/shell offsets +! = 2 for large displacement beam/shell offsets +! isetoff = 0 - do not apply beam/shell offsets +! = 1 - apply beam/shell offsets +! ioffsetm = min. value of offset flag +! inc_incdat = flag to record increment number of a new loadcase in incdat.f +! iautspc = flag for AutoSPC option +! ibrake = brake squeal in this increment +! icbush = set to 1 if cbush elements present in model +! istream_input = set to 1 for streaming input calling Marc as library +! iprsinp = set to 1 if pressure input, introduced so other variables +! such as h could be a function of pressure +! ivlsinp = set to 1 if velocity input, introduced so other variables +! such as h could be a function of velocity +! ipin_m = # of beam element with PIN flag +! jgnstr_glb = global control over pre or fast integrated composite shells +! imarc_return = Marc return flag for streaming input control +! iqvcimp = if non-zero, then the number of QVECT boundary conditions +! nqvceid = number of QVECT boundary conditions, where emisivity/absorbtion id entered +! istpnx = 1 if to stop at end of increment +! imicro1 = 1 if micro1 interface is used +! iaxisymm = set to 1 if axisymmetric analysis +! jbreakglue = set to 1 if breaking glued option is used +! iglstif = 1 if ddm and global stiffness matrix formed (sgi solver 6 or solver9) +! jfastasm = 1 do fast assembly using SuperForm code +! iwear = set to 1 if wear model, set to 2 if wear model and coordinates updated +! iwearcf = set to 1 to store nodal coefficient of friction for wear calculation +! imixmeth = set=1 then use nonlinear mixture material - allocate memory +! ielcmadyn = flag for magnetodynamics +! 0 - electromagnetics using newmark beta +! 1 - transient magnetics using backward euler +! idinout = flag to control if inside out elements should be deactivated +! igena_meth = 0 - generalized alpha parameters depend on whether or not contact +! is flagged (dynamic,7) +! 10 - generalized alpha parameters are optimized for a contact +! analysis (dynamic,8) +! 11 - generalized alpha parameters are optimized for an analysis +! without contact (dynamic,8) +! magf_meth = - Method to compute force in magnetostatic - structural +! = 1 - Virtual work method +! = 2 - Maxwell stress tensor +! non_assumed = 1 no assumed strain formulation (forced) +! iredoboudry set to 1 if contact boundary needs to be recalculated +! ioffsz0 = 1 if composite are used with reference position.ne.0 +! +!*********************************************************************** diff --git a/code/include/creeps2012 b/code/include/creeps2012 new file mode 100644 index 000000000..56cca4975 --- /dev/null +++ b/code/include/creeps2012 @@ -0,0 +1,28 @@ +! common block definition file taken from respective MSC.Marc release and reformated to free format +!*********************************************************************** +! +! File: creeps.cmn +! +! MSC.Marc include file +! +real(pReal) cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept +integer(pInt) icptim,icfte,icfst,icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,& + icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa +real(pReal) time_beg_lcase,time_beg_inc,fractol,time_beg_pst +! +integer(pInt) num_creepsr,num_creepsi,num_creeps2r +parameter(num_creepsr=40) +parameter(num_creepsi=18) +parameter(num_creeps2r=4) +common/marc_creeps/cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept(33),icptim,icfte,icfst,& + icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa +common/marc_creeps2/time_beg_lcase,time_beg_inc,fractol,time_beg_pst +! +! time_beg_lcase time at the beginning of the current load case +! time_beg_inc time at the beginning of the current increment +! fractol fraction of loadcase or increment time when we +! consider it to be finished +! time_beg_pst time corresponding to first increment to be +! read in from thermal post file for auto step +! +!*********************************************************************** diff --git a/code/setup/setup_code.py b/code/setup/setup_code.py index 86d3b79b0..c19e2f8e7 100755 --- a/code/setup/setup_code.py +++ b/code/setup/setup_code.py @@ -6,7 +6,7 @@ import os,sys,string,re,damask architectures = { 'marc': { 'parent': 'DAMASK_marc.f90', - 'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011'], + 'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011','2012'], }, }