fd94c786f0
moved stiffness tensor calculation to lattice
...
introduced 'isotropic' and 'orthorhombic' lattice types to use corresponding symmetries in stiffness tensor. intended to be used with non-crystal plasticity models (j2, constitutive_none with isotropic, cubic or orthotropic elasticity).
2013-01-21 21:57:26 +00:00
c195f316e1
corrected calculation of twin stiffness matrix
2013-01-21 08:17:43 +00:00
9ee8108b6b
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 11:30:52 +00:00
c6a79d2b3d
divergence_correction for basic solver variants has now 3 possibilities:
...
0: uncorrected, slope per sidelength (physical dimension) e = res/dim
1: corrected by sidelength, slope per unitlength e = res/1
2: corrected such that distance between FPs e = 1
alway regarding the medium length of x,y,z direction
2013-01-16 10:40:53 +00:00
20bc97b7eb
added doxygen comments and unified naming scheme for ip, element and grain
2013-01-16 10:14:57 +00:00
8a45a90775
new crystallite output "grainrotationX", "grainrotationY", "grainrotationZ" that gives the deviation of the initial orientation in degrees around the sample reference x/y/z axis, while "grainrotation" still gives the same as axis angle pair in crystal coordinates
2013-01-16 08:45:41 +00:00
645b2605e1
corrected reporting to statistics file (*.sta)
2013-01-11 10:40:16 +00:00
4c145376a0
forgot some integers
2013-01-10 18:50:14 +00:00
6e3e06bed7
corrected PETSc macro expansion
2013-01-10 15:36:55 +00:00
563b1f5e4b
added some warning and explicit size of arrays
2013-01-10 13:33:43 +00:00
0d5e91ac87
corrected reporting of basic PETSc variant and unified reporting of all spectral solvers
...
improved warning and error in IO, now able to report correctly elements up to 9 digits
2013-01-09 22:19:32 +00:00
55b88e47b7
fixed wrong temperature when using spectral solver
2013-01-09 18:08:08 +00:00
00246ade4e
missing range in array fixed
2013-01-09 14:43:27 +00:00
093cf92338
remove omp statements during initialization, "line" for reading in from material.config now has a default (empty) value to prevent conditional jump depend on this value
2013-01-08 22:11:59 +00:00
4eaa97b33c
minor changes on buggy latest commit (wrong use statement)
2013-01-08 21:54:25 +00:00
19d86ca06a
removed unnecsessary omp statements, removed one transpose in constitutitve
2013-01-08 11:09:20 +00:00
ce7a0571fd
fixed bug in forwarding fields for AL solver
2013-01-08 10:12:03 +00:00
d90efef535
fixed bug in cutback scheme
2013-01-07 21:42:00 +00:00
738f363263
corrected small issues with PETSc debugging
2013-01-03 16:17:23 +00:00
7a43d1b6ad
added funtionality to specify working directory to spectral solver
2013-01-02 17:02:12 +00:00
766202bae9
corrected debug output of aged state: first reports for selected debug_el,debug_ip
2012-12-28 12:15:59 +00:00
f14fd45ce1
new material parameter "egdejog": fraction of annihilated screw dipoles that forms edge jogs
2012-12-23 12:56:15 +00:00
64d167fa90
loadcase rotation now working for AL solver
2012-12-17 10:18:39 +00:00
7dd1130e92
reset syncSubFrac flag when turning terminallyIll
2012-12-16 16:18:36 +00:00
92d2c83334
more debugging info for timesyncing
2012-12-16 11:30:19 +00:00
4f12073dcb
once again corrected parallelization statements
...
added some debugging writes for timesyncing
2012-12-16 10:54:13 +00:00
1baf8dea5d
load case rotation no working for Basic PETSc solver
2012-12-15 23:52:06 +00:00
5c0c7121e7
made PETSc silent by removing -snes_view from default options.
...
introduced PETSc option for debugging that introduces some debugging options into the petsc options and move PETSc initialization from numerics to DAMASK_spectral_utilities
2012-12-15 18:07:49 +00:00
566b680319
made new spectral solver the default (no need for SOLVER=NEW anymore) and added additional warnings switche to be used with gfortran >= 4.6
...
added comments
2012-12-15 16:21:10 +00:00
b1f28ba5e7
made restart working for all solvers and added corresponding test
...
corrected error handling for FFT based function in case of odd numbers etc.
2012-12-14 17:30:22 +00:00
7b87987751
introduced option for regridding to numerics.f90, working as follows:
...
first cut back is tried if material point model oder BVP solver does not converge.
If no regridding is enabled after max cut back, in case of non-converged material point the simulation stops and in case of non-converged BVP solver it continues.
set regridMode to 2 to enable regridding if BVP solver OR materialPoint model do not converge,
set regridMode to 1 to enable regridding if materialPoint model do not converge, non-converged BVP solver will be ignored as in the standard case.
For regridding, the load case need to have a restart freq set.
enabled restarting for Basic PETSc variant
2012-12-14 15:18:04 +00:00
64d9c70dc7
corrected nonconforming use of openmp parallelization
2012-12-14 14:30:08 +00:00
d559653722
small improvements on tests
2012-12-13 20:20:04 +00:00
2b4eb2a257
changed shell variable containing name of Workstation from $HOST to $HOSTNAME as this is also working on Ubuntu
2012-12-13 13:53:54 +00:00
f744fc1d47
fixed bug in parallelization: flushing of crystallite_todo was missing at a couple of places
2012-12-11 15:05:08 +00:00
6a9b19e4c0
fixed bug in timesyncing procedure: if any ip that synchronizes its time step did not converge, all nonlocals become terminally ill; before, this led to an infinite loop in crystallite
2012-12-11 13:42:22 +00:00
03a88d4798
fixed timesyncing for special case of ip that synchronizes its time step, but does not have a neighbor
2012-12-11 13:38:36 +00:00
35a0483507
fixed bug in last revision: FE_geomType was not in namespace
2012-12-10 17:22:16 +00:00
10ed848258
fixed 2 bugs: missing mapping with FE_geomtype(mesh_element(2,...))
2012-12-10 17:03:28 +00:00
37028455e9
always use the current state for leaving flux calculation when no neighbor is present
2012-12-09 12:24:32 +00:00
98d02dcffb
removed call to microstructure in stateJump function, since this is already done in the state integrator subroutine
2012-12-07 07:50:41 +00:00
149c747688
use non-corrected densities for rate check in dotState
2012-12-06 17:14:35 +00:00
1f5a30d6f0
corrected typo in random multiplication term
2012-12-06 14:04:18 +00:00
20f7053ad3
correction of interaction coefficients due to line tension effect only applies to coefficients 3, 4 and 5
2012-12-04 18:23:46 +00:00
0986a66449
accidentally also included some changes in crystallite_integrateStress in last commit; reverted these changes in this revision
2012-12-03 16:34:41 +00:00
f2dacb5f40
polished debugging output
2012-12-03 16:29:54 +00:00
9eb89b0050
made random multiplication switchable via material.config
2012-12-03 12:59:38 +00:00
62ddbf26df
slightly changed the multiplication term in the nonlocal model for the starvation case
2012-11-29 18:50:25 +00:00
f92d34dd22
removed some unused variables
2012-11-29 18:44:00 +00:00
57fed66a8e
simplified load case parsing
2012-11-29 13:26:17 +00:00
7358dd6679
fixed wrong index contraction in acoustic tensor calculation
...
(blew up calculations with zero Poisson ratio...)
2012-11-28 18:46:07 +00:00
6bb3a475ce
added output of current relative tolerance when reporting relative errors
2012-11-28 18:44:51 +00:00
5ea0139678
simplified the rate calculation interface in DAMASK_spectral_utilities.f90, corrected bug in rotation parsing and added debug option "rotation" to spectral solver options. This will show the current average stress and deformation additionally in lab coordinate system
2012-11-28 15:04:05 +00:00
07bec16268
corrected compilation exception for gfortran in case of compilername!=F90
2012-11-28 13:54:02 +00:00
29618df550
annihilate only part of the screw dipoles (specified by minimumDipoleHeight), not all; moved annihilation of screws from deltaState back to dotState
2012-11-28 12:09:48 +00:00
e10000a338
Introduced an alternative cutback scheme for the nonlocal model, that allows to keep the results of most of the ips that immediately converged, and only do cutbacks in regions where some ips are in big trouble. Only works for nonlocal model and state integrator 2.
2012-11-27 18:36:55 +00:00
e45e1316ba
removed auto detection of compilername, it only works if the file you're looking for (in our case "ifort") is in the same directory as the Makefile
2012-11-27 17:22:03 +00:00
1e32eb560e
corrected buggy calculation of Schmid matrix for twins introduced in rev1809.
...
(stress acting on twin systems was overestimated by factor of sqrt(3) due to that!!)
additional polishing.
2012-11-23 17:02:50 +00:00
11ed7fab86
corrected bug in curl calculation causing the output of transposed tensor (according to information stored in testing/9102/proof/Curl of Tensor - Physics Forums.pdf)
...
addCurl test is now done against analytical solution and working, added it to list of automated tests.
small improvements on test.py
2012-11-23 15:16:51 +00:00
e584c0e6e8
deleted space in front of preprocessor line
2012-11-22 20:04:33 +00:00
dbc26e5f25
corrected auto detection of ifort compiler
2012-11-22 13:17:54 +00:00
38ec462f4a
order of integration now same for all state integrators: first calculate the dotState and then the deltaState
2012-11-22 13:04:19 +00:00
7d196fbb25
polishing
2012-11-22 09:58:36 +00:00
23a0ca3b59
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0
...
serial calc now skips IPs when /elementhomogeneous/
for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 17:00:29 +00:00
ec8a84ded7
added output of element and ip to debug messages
2012-11-21 16:58:14 +00:00
d189a6a7a0
polishing
2012-11-21 16:57:57 +00:00
760af1fbbf
crystallite_requested now masked by execIP, now elemhomogeneous works again
2012-11-19 15:13:48 +00:00
d4a59541ad
removed write statements which were introduced for "debuging"
2012-11-19 15:12:11 +00:00
9fb94cd707
breaking crystallite loop in case of terminally ill (this functionality was probably lost since rev1886)
2012-11-19 08:39:48 +00:00
4195d53d11
message of last commit was incomplete: moved annihilation of screw dipoles from dotstate to deltaState, since it is not a rate
2012-11-17 13:54:22 +00:00
467c186f0f
annihilation of screws
2012-11-17 13:50:20 +00:00
dc5cd8a4c4
A modified twin-twin interaction matrix for BCC is introduced.
...
An introduction of a third parameter at the interactionTwinTwin in the material.config for BCC-dislotwin materials is essential.
2012-11-16 13:39:08 +00:00
d9a98417ca
switched element library to geomType based.
...
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-15 22:45:20 +00:00
aec163941d
calculate ip coordinates only once when the first ip enters calculation mode
2012-11-15 12:31:39 +00:00
bdbc202c7e
corrected typos
2012-11-15 09:22:36 +00:00
c0a5a1dfd1
Formation of the Slip-Slip interaction matrix for BCC.
2012-11-14 17:35:33 +00:00
7e683ca7c3
removed coordinates from call to CPFEM_general and introduced direct storage of coordinates to mesh_ipCoordinates
2012-11-14 14:38:10 +00:00
1896c07c70
corrected some bugs in the last commits
2012-11-14 14:33:41 +00:00
c8be3a03bd
The twin system <111>{112} for BCC is introduced.
2012-11-14 13:43:59 +00:00
6b010b4a46
Twin-slip interaction matrix for BCC is set to 0.
2012-11-14 11:53:22 +00:00
b0464ad176
A modified slip-twin interaction matrices for FCC and BCC are introduced.
...
The shear twin value for BCC is corrected.
An introduction of a third parameter at the interactionSlipTwin in the material.config for dislotwin materials is essential.
2012-11-14 11:13:16 +00:00
fb2981b4c4
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second...
2012-11-14 10:27:23 +00:00
e4ce63d689
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second... (used to be transposed for memory efficiency)
2012-11-14 10:22:34 +00:00
789e6c7d83
dropped support of MSC.Marc/Mentat 2007 and 2008
2012-11-14 09:57:18 +00:00
ad9639f2f7
check for existence of files before sym-linking to them.
2012-11-14 09:40:45 +00:00
c3926efd93
introduced logic to use gfortran as default if ifort is not found
2012-11-13 19:12:00 +00:00
922042d8d5
now automatically using gfortran if no ifort is found
2012-11-13 18:40:14 +00:00
0c87fc16f4
renamed the keyword for the make options from make to options
2012-11-13 17:26:25 +00:00
70c4e11742
added comments and structured the code. Temperature is not longer stored for each point but only to simplify restart behavior as long as it is not fully supported by the constitutive models
2012-11-12 14:14:39 +00:00
3c53f3ec9a
last version contains buggy mesh.f90; corrected typo in initialization
2012-11-09 07:52:44 +00:00
366ac28694
parallelized mesh_build_subNodeCoords and mesh_build_ipCoordinates
2012-11-09 07:47:14 +00:00
b1c3c57412
some more finetuning, still not running on gfortran 4.5.0
2012-11-08 21:33:58 +00:00
c831716b26
reseting value vector when reading in for loadcase file, otherwise NaNs might be in there
2012-11-08 20:35:31 +00:00
11264f3fe4
forgot to check for convergence flag in FPI integrator
2012-11-08 20:15:19 +00:00
60438cdbcc
criterion for crystallite cutback loop changed from crystallite_subStep to crystallite_todo; this avoids problems when the last substep of the crystallite increment is below subStepMinCryst (which is allowed during last wind forward)
...
fixed bug in the adaptive Euler integrator and the RK4 integrator, which could not reach the stateJump function, because of erroneous check for converged flag; also corrected the state counter for the RK4 integrator
2012-11-08 20:00:29 +00:00
ee5903c767
replaced real 'guessmode' with logical 'guess', caused trouble on gfortran 6.3 with ultra optimization
2012-11-08 19:32:00 +00:00
6a86f36407
now having libraries from Makefile before PETSc Libraries in linker order
2012-11-08 18:26:10 +00:00
c775edaa6d
better avoid initialization of residuum_old with huge, since it posed problems in Abaqus
2012-11-08 13:26:22 +00:00
dad9922f54
fixed bug in crystallite_FPI: stateDamper always has to be defined for each grain
...
added some OMP FLUSH statements were necessary
replaced openmp do by forall construct where possible; this is much safer and perhaps even as fast for small loops
2012-11-07 15:43:29 +00:00
bbcffa668b
some small changes in including PETSc *.h90 files to prevent warnings.
...
It seems that a bug in old gfortran 4.5.0 causes the problems, at least with 4.7.3 it seems to work after fixing the bugs in IO.f90
2012-11-07 13:11:41 +00:00
9b99825ac6
preventing array index out of bounds in case of empty line, removed to goto statements
2012-11-07 09:31:46 +00:00
5214b93342
fixed bug when reading in geometry for spectral solver
2012-11-06 17:16:01 +00:00
3ada4897fb
reordered PETSc initialization (now first part done in interface, setting of parameters done in numerics), removed unnecessary includes for PETSc
...
still not running with gfortran, use at own risk!
2012-11-06 16:00:51 +00:00
a86d528a4a
replaced call flush(6) by flush(6), slightly improved formating for output of gfortran version
2012-11-06 15:50:20 +00:00
5b6baa7c0d
introduced distinction between ip coordinates and cell center coordinates; the former can be globally calculated by subroutine mesh_build_ipCoordinates, the latter locally by the function mesh_cellCenterCoordinates; renamed mesh_ipCenterOfGravity to mesh_ipCordinates
2012-11-06 14:37:13 +00:00
bb033c5fe7
Simplified algorithm of crystallite_integrateStress while preserving (almost) same functionality.
...
Removed "leapfrogging" (increase of step for next guess, when last guess was ok); Replaced Armijo rule testing for step size by simple check if the residuum got better, since the former virtually did not have any effect; consistently using the 2-norm of the residuum rather than infinity-norm for the convergence check throughout the function
2012-11-06 12:35:45 +00:00
639d6e0655
inserted missing flush(crystallite_todo) in parallel section; might have caused trouble in parallel calculations before
2012-11-05 14:45:52 +00:00
086fe138b1
substituted matrix inversion to solve equation by direct solution routine from LAPACK
2012-10-31 09:56:26 +00:00
55dc286be2
corrected limit for upper stable dipole distance; fixed a bug in the postResults where division by zero might happen
2012-10-29 13:02:01 +00:00
f666f8dcf3
added possibility to scale the plastic shearrate by the ratio of mobile to total density; keyword in material.config is "deadZone"
2012-10-29 12:49:28 +00:00
ca596bc7af
error messages are now printed, added svn properties
2012-10-25 09:16:17 +00:00
93cc466749
third entry in mesh_ipNeighborhood stores the neighbor_index that points from each neighbor back to the central ip; needed in nonlocal model
2012-10-24 14:03:02 +00:00
13b55275b1
documented utilities and structured, worked on the restart capabilities of the new basic solver
2012-10-24 11:31:40 +00:00
5ad0eda1b6
switched saturation behavior!!
...
was \dot s_alpha = (1-s_alpha/s_inf)^a h_alphabeta \dot gamma_beta
now \dot s_alpha = h_alphabeta (1-s_beta/s_inf)^a \dot gamma_beta
current form is consistent with the genmat implementation (and appears to make more physical sense). Kalidindi_etal1992 suggested this form, but altered it to the alpha-one in Bachu+Kalidindi1998... By now, it seems that some groups use alpha, others beta approach.
introduced two new absolute tolerance values for "shears" and "twinFrac" (default 1e-6).
2012-10-22 14:55:07 +00:00
2be331b74d
In crystallite for state integrators 2 and 3: now that "stateJump" is called before integrating dotState, we have to do state = state + dotState *dt instead of state = subState0 + dotState * dt; otherwise the deltaState is lost
2012-10-22 13:34:15 +00:00
0980920b66
In crystallite: for state integrators 2 and 3 the deltaState always has to be done at the beginning of the integration, not at the end; otherwise the stiffness calculation can be completely wrong, when the state is changed after the stress integration for the central solution.
...
Also changed some debugging levels in crystallite and mainly in constitutive_nonlocal
2012-10-22 07:59:35 +00:00
3ecaa9e371
modified multiplication term in order to mimic a discrete distribution of dislocation sources; namely, at high resolution, when there is (on average) less than one source per integration point, a random generator decides whether there is a source in the finite volume or not; if there is one, then the multiplication turns independent of the density and depends only on the velocity/volume times a scalar factor; recovers density*velocity/lambda for large finite volumes
2012-10-19 11:40:17 +00:00
36676029e1
for state integrator 2 (explicit euler) and 3 (adaptive 2nd order euler): don't do any state evolution during stiffness perturbation, but only stress integration, since for those cases the state is not restored after every perturbation step
2012-10-19 11:20:31 +00:00
b9f97ba5da
unified naming scheme, fixed a bug in the new basic scheme, and added a statistic file similar to abaqus to store the information on needed cut backs and iterations for each inc
2012-10-19 08:44:21 +00:00
6230dacbac
only first broken ip signals "terminally ill"
2012-10-18 13:48:06 +00:00
4a6e08bb69
changed keyword in spectral geometry file for multiplication of entries from "copies of" to "of"
2012-10-18 10:17:16 +00:00
dd5f453994
mainly cosmetics. added some comments. changed debug levels for some outputs. corrected (probably non-essential) check for NaN in FPI stressIntegrator.
2012-10-18 09:53:26 +00:00
79a5a30a90
removed now obsolete vectorproduct variables st, tt...
2012-10-18 07:25:49 +00:00
5f0440fde3
crystallite_integrateStress now raises an error if Fp becomes NaN
2012-10-17 16:19:42 +00:00
31f20e51da
just to be able to tell about the bug I found in the hex slip systems---which I actually forgot to mention during the last commit---I slipped in a syntax error that now is fixed, too...
2012-10-12 20:31:50 +00:00
05c5ea42d7
prepared loop distributions to hold "over shooters"
2012-10-12 18:00:55 +00:00
82a13af474
tidied up the Schmid matrix calculations.
...
added internal check against dilatation in Schmid matrices.
2012-10-12 17:59:50 +00:00
b20c612e25
added error "0" for internal (run time) checks failing
2012-10-12 17:55:23 +00:00
1b2edd7e7d
fixed error in _identity (wrong delta-function)
...
added _exp33 for matrix exponential
added trace33 for matrix trace
2012-10-12 17:54:20 +00:00
324dfda5a2
added comments (doxygen conform) to phenopowerlaw, added warning on specifying h0_sliptwin as it has no effect
2012-10-11 14:49:12 +00:00
e4054c116d
fixed problem with gnu compiler: allocation of variables in constitutive_nonlocal_stateInit was not safe when not using any nonlocal constitution
...
put header of debugging output in constitutive_init at the start of the function in order to make debugging easier
2012-10-09 12:34:57 +00:00
a84e0529c3
make correction of hardening coefficients thread safe
2012-10-05 16:05:51 +00:00
40a2e652e7
introduced material parameter "linetension", which indicates how strong the effect of the line tension on the hardening coefficients is
2012-10-05 14:42:41 +00:00
7cc6108a04
hardening coefficients for fcc are density dependent (line tension effect, Devincre, Kubin, Hoc; 2006; Physical analyses of crystal plasticity by DD simulations)
...
fixed bug with thermal annihilation producing negative density in case of very small dipole density and high climb velocity
2012-10-04 18:08:40 +00:00
80465c0b49
moved option for UTF-8 encoding to spectral interface as this is now called before prec init.
...
if UTF-8 encoding is needed for FEM solver (old compilers might not support it), add the same statement to the corresponding interface routine
2012-10-04 14:22:39 +00:00
e2ea3cdff6
again some changes regarding creation of NaN, ieee-conforming way is not in the complilers yet.
2012-10-02 16:53:03 +00:00
bce8012c89
random distribution of initial dislocation density now really independent of meshsize
2012-10-02 15:26:58 +00:00
d5ce49c471
numerics got some protected statements and is now reading in the new keywords for the solver selection in small letters.
...
spectral solver got cut back facilities + improved output to screen
2012-10-02 15:26:56 +00:00
91b7883c2a
random distribution of initial dislocation density now independent of mesh size
2012-10-02 13:35:34 +00:00
1502a71f0c
added possibility to start with an initial random distribution of dislocation segments with specific overall density
2012-10-02 12:57:24 +00:00
0bcb8f59db
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 12:53:25 +00:00
6301787df4
moved the the variable cutBack from FEsolving.f90 (where it was not used at all) to the interface routines to make responsibility of cut back control clear
...
PLEASE RUN setup_code.py IF YOU DO MARC SIMULATIONS, THE INTERFACE HAS CHANGED
2012-10-02 12:46:58 +00:00
c8b7da432c
set debug_level to be protected as it is read-only for other modules
2012-10-02 09:35:39 +00:00
4c7bcb8df9
modified formated integer output and added error number in case maximum number of cutbacks is reached
2012-10-02 09:30:13 +00:00
9fc46b4950
added /echo/ statements
2012-10-02 08:12:53 +00:00
b99a846503
new scaling feature in numerics (unitlength) did not scale the reference coordinates in the first place; now this is taken care of in mesh.f90, so scaling should work properly
2012-09-25 16:21:58 +00:00
d0fd3c03c5
forgot to check in; belongs to rev 1762
2012-09-24 16:22:25 +00:00
912277d1ed
substituted the call to the flush subroutine with the intrisic flush(6) function
2012-09-24 12:10:28 +00:00
8336d0705c
new numerics parameter "unitlength" that scales the model size in DAMASK; this enables to use very small models in marc without getting any numerical problems for example with contact which does not seem to work when using very small numbers
2012-09-24 06:13:26 +00:00
b587bffdd5
added some 'protected' statements to variables that shouldn't be changed by other modules
2012-09-22 16:49:41 +00:00
8ed69170c5
corrected wrong warning complaining about FFTW string when DAMASK_NUM_THREADS undefined
2012-09-14 16:39:42 +00:00
1cfc467705
added new cut back parameter for spectral solver and instrumented variables for use with doxygen
2012-09-13 09:48:38 +00:00
b9a2890665
fixed bug in loadcase rotation: when not specifying "deg" the rotation was reset to 0,0,0..!
2012-09-06 14:05:28 +00:00
29023cea3c
minor correction of debugging output
2012-09-05 11:19:46 +00:00
330d71864e
fixed bug with stress BC handling
2012-09-05 08:30:15 +00:00
f153866030
introduced factor to control edge contribution to multiplication;
...
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
22812c9a91
some minor improvement on precision detection: checking only once (in prec and no longer in math and crystallite), added one more 4/8 switch for LAPACK, as there is no single precision FFTW, stopping compilation for spectral method if FLOAT=4
...
new function in IO to print integers without leading zeros, implemented it at some places in the new spectral solver (reporting still needs some serious polishing)
updated preprocessing for documentation to handle precision correctly
2012-08-30 20:26:28 +00:00
299d9e6bc4
fixed bug in seed initialization that didn't allow to redo calculations that started with a random seed. Now the whole random seed array is set to one value, previously only the first one was reported and the remaining ones were random
...
removed old random function used by halton
2012-08-30 14:58:30 +00:00
d80b45c1d9
added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
...
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
8e3b547cbd
changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
...
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
84e3f94424
added flush for easier debugging
2012-08-29 15:23:43 +00:00
d83150be1b
now capturing "terminallyIll" for basic solution, should end in a automatic cutback of time steps for the spectral solver
2012-08-29 05:50:42 +00:00
3106b8ce0c
corrected definition of integer type for gfortran
2012-08-29 05:19:35 +00:00
d089c12947
abaqus seems to have similar problems with the openmp lib as marc (use module vs. include file), i hope this fixes the crashes
2012-08-28 19:48:38 +00:00
5e9e8497e6
new solver is now compiling without a PETSc installation, however only the plain basic solver is available then.
...
also removed reporting of PETSc related variables in the case it is not installed/found
2012-08-28 19:19:47 +00:00
0f64289d75
fixed bug causing trouble with ifort 11 (abaqus)
2012-08-28 19:10:54 +00:00
0959ff3299
substituted hand written matrix inversion by LAPACK version with precision selection.
...
also introduced check for inversion into DAMASK_spectral_Utilities.f90 for the stress BC calculation. This part is further improved by using 5% of the reference stiffness to avoid trouble in the fully plastic regime (where the stiffness is underestimated)
Test for Marc 2010 is updated because the new inversion give slightly different results near 0 (order of e-13)
2012-08-28 16:59:45 +00:00
73349d02f5
merged precision info into the file prec.f90 and removed prec_single.f90
...
precision information is now parsed as a makro, defined by the compiler, eg. -DFLOAT=8 for 8 byte long floats or -- in case no values is given -- for the FEM wrapper by the interface files.
Please don't forget to run setup_code.py !!!!!!!!!!!
abaqus_v6.env is adjusted to specify the standard precision (float=8, int=4) and got some extra compilation options, some deprecated warning supressors are removed
Optional Marc modification will follow that allow automatic selection of suitable precision
2012-08-28 16:08:17 +00:00
f3e7b3cec8
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:31 +00:00
aa380dcb08
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:22 +00:00
efd1b513cf
fixed bug in divergenceFDM
2012-08-27 15:43:17 +00:00
9214da4465
added missing labels to list of available outputs
2012-08-27 12:41:57 +00:00
96ba5ecae4
moved some more 'mesh related' functions for post processing from math.f90 to mesh.f90
...
f2py functions remaining in math.f90 now uses assumed size arrays in order to have simpler interfaces. This is only working with python 2.7!
changed python pre- and postprocessing scripts.
If you encounter any problems whith core modules, try to remove the old core.so in the lib/damask
2012-08-27 08:04:47 +00:00
55a5112f36
added comments for doxygen documentation
2012-08-25 11:46:36 +00:00
e335222bd0
added constitutive none to abaqus files
2012-08-24 19:21:39 +00:00
405c3765bd
fixed bug in fiber texture component caused non-even distribution by correctly getting numbers of the halton sequence
2012-08-24 13:27:55 +00:00
3cd5fa90e8
corrected dislocation multiplication term for special case of zero density
2012-08-24 11:36:46 +00:00
4f67d04c69
new parameter "significantRho" for nonlocal constitutive law ; density below this value will hardly contribute to dislocation glide or any dislocation reaction ; old parameter "absoluteToleranceRho" is now used only for its initial purpose, namely the absolute tolerance in the state integration
2012-08-23 05:48:21 +00:00
222aed9f60
derivative of velocity with respect to resolved stress was flawed; now much better convergence of stress integration for nonlocal constitutive law
2012-08-21 14:40:01 +00:00
ad7381cfdd
maximum relative step length in stress integration cannot decrease below 1
...
intermediate tensor "A" is calculated only once before the Lp loop in "integrateStress"
2012-08-21 08:53:36 +00:00
35dffd52c1
now using spectral_quit (like old spectal solver, needed because of f2py)
2012-08-20 13:22:34 +00:00
b96df9987e
fixed reading/writing of integer arrays with function for real arrays
2012-08-16 14:55:23 +00:00
453c6031a7
added functions for reading values of integer data type to binary file, corrected comment on old versions which are for real (pReal) only
2012-08-16 11:57:15 +00:00
b2aacf9ca4
rates in constitutive_results are taken directly from last converged step and not calculated again; added output of rates for annihilation of screws and deposition of edge jogs on collinear system
2012-08-16 11:03:22 +00:00
bd754dbefd
corrected debug output of evolution rates; added possibility to change the safety factor for the CFL flux condition via the material.config file; updated the example material.config due to recent changes in nonlocal constitutive
2012-08-16 09:13:38 +00:00
0434ef3daa
some comments to be seen in documentation
2012-08-15 13:38:38 +00:00
c2c31a0a59
added SolverBasicPETSC module to the new FFT solver (solves the basic scheme using PETSc when mysolver = basicpetsc in numerics.config)
...
some bug fixes
2012-08-14 16:58:23 +00:00
f5e7d576f1
introduced annihilation of screw dipoles; so far no thermal activation, but immediate annihilation; each annihilated screw dipole leaves behind an edge jog of same length as the dipole height on the collinear system
2012-08-14 12:26:20 +00:00
c1c5941733
stressAndItsTangent:
...
when winding forward to last substep in increment, also do the calculation if this substep is below "subStepMinCryst";
output of "wind forward" and "cutback" info only for crystallites that are still "todo"
integrateStress:
maximum component in Lp determines absolute convergence criterium:
aTol = max(maxLpComp * rTol_fromConfig , aTol_fromConfig)
this ensures that small values in Lp do not spoil the convergence, similar to the effect of the relevantStrain parameter before (not needed anymore in the stress integration)
2012-08-14 12:07:59 +00:00
eae9a34c6b
corrected debugging output: extreme values of returned stress and jacobian belong to cpfem debugging, not homogenization
2012-08-14 11:48:43 +00:00
259eb7850e
more work on array ordering in new solver. (now working but not tested)
2012-08-10 17:01:58 +00:00
cd0da03ebc
changed comments to doxygen style
2012-08-10 15:58:17 +00:00
08c7be7d15
adaptive regrid now working, updates F and F_lastInc based on mapping.
2012-08-10 15:48:27 +00:00
b324a98014
changed order of most arrays to fortran-fast, whole new solver still work in progress
2012-08-09 13:04:56 +00:00
fe4d4d9525
changed comments in prec and IO to be read by doxygen, fine tuned output of doxygen and added precompilation for documentation
2012-08-09 11:01:53 +00:00
d0933dad7b
added filter option to the spectral solver to mitigate spurious oscillations due to gibb's phenomenon. activate by setting myfilter in config file appropriately (currently only 'none' and 'cosine' options coded). more cleaning up of AL code
2012-08-07 17:23:13 +00:00
925915e30d
some cleaning up
2012-08-07 12:02:57 +00:00
32f8c9c6ea
moved petsc option string to numerics and added new numerics parameters to config file
2012-08-06 17:27:53 +00:00
93658c72db
set auto values back to auto
2012-08-06 12:44:07 +00:00
7e3a837640
moved calculation and output of geometry related data to mesh.f90, moved output of command line related information to DAMASK_spectral_interface.f90.
...
improved new solver structure (use with make SOLVER=NEW)
2012-08-06 12:43:05 +00:00
a48d180f8c
allow prefactor for self-diffusion to be equal to zero
2012-08-06 09:03:33 +00:00
e2a2621235
updates for AL version of spectral solver
2012-08-06 08:53:12 +00:00
e8df3678aa
added possibility to assign the transmissivity of grain boundaries a fixed value by use of the keyword "grainboundaryTransmissivity" in the material.config; grain boundaries are identified as interfaces between areas of different material_texture
2012-08-03 14:32:49 +00:00
948d9c03d0
new version of modular solver structure
2012-08-03 09:25:48 +00:00
3ffba037d4
Reading of euler angles from the loadcase corrected.
2012-08-02 17:52:07 +00:00
740357172a
Reading of Euler angles from the loadcase corrected.
2012-08-02 17:46:50 +00:00
ee1bde0cd7
enabling regridding more than once by introducing deallocation of arrays
...
added J2 test (stub from Taymour)
2012-07-31 15:37:49 +00:00
5a89c783d4
deallocating already allocated arrays in case of regridding/restarting (i.e. when calling init more than once)
2012-07-31 14:00:15 +00:00
991a7bbd2d
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 15:51:48 +00:00
d4163dd16f
further work on modularization, basic scheme is now calculating the same results as DAMASK_spectral.f90
2012-07-30 14:06:22 +00:00
c341ddd855
more modularization….
2012-07-26 13:58:47 +00:00
4ed68bb4ae
next round in modularization
2012-07-25 14:01:39 +00:00
e1faad8bcf
next round in modularizzation of solvers
2012-07-24 17:07:10 +00:00
882c44a61d
changed the majority of debugging output to level "extensive"
2012-07-24 15:29:23 +00:00
15c5131874
corrected formulation of maximum height of screw dislocation dipoles
2012-07-24 14:50:11 +00:00
9c0a161ec0
in case of regridding, undeformed configuration is written out correctly. Restart improve by reading in additional data from converged step.
2012-07-24 12:21:41 +00:00
c4c00f04f4
no dipole formation by stress decrease;
...
dipole dissociation rate proportional to "deltaDipoleLimit / oldDipoleLimit", not "deltaDipoleLimit / newDipoleLimit"
2012-07-24 06:57:37 +00:00
3d59fec305
further modularisation of spectral solver (only for basic scheme so far)
2012-07-23 10:12:31 +00:00
bd9e81fbec
intermediate, not working state of new solver structure
2012-07-20 15:33:13 +00:00
ad3f9d8050
removed old standalone AL solver and introduced new structure for solver zoo
2012-07-19 17:24:56 +00:00
7d4ff278cb
worked on the restart capabilities
2012-07-19 14:16:59 +00:00
13caf2d389
made linear shape reconstruction working again, pretty similar results like corrected FFT reconstruction
2012-07-18 18:39:59 +00:00
a22163c2ae
reverted unwanted commit of Makefile
2012-07-18 12:34:46 +00:00
95d292b286
2012-07-18 12:31:07 +00:00
7c6fc121fd
condensed error reporting for constitutive_XYZ_init
...
removed erroneous check for structure>3
2012-07-17 17:36:24 +00:00
0fdd43b54b
minor clarification of file content and its use
2012-07-05 10:02:20 +00:00
4d09ef0648
changed variable name "debug_what" to "debug_level"
2012-07-05 09:54:50 +00:00
b69f446caa
added constitutive_none
...
added wrongly deleted "endif" statements
removed tmglib and refblas from linker command for lapack (Koen??)
xxxROOT is changed by setup_code unless commented-out... So had to delete '#' again.
2012-07-03 13:59:38 +00:00
aeb1e18268
passing of multiple make options possible now
2012-07-03 13:57:05 +00:00
7f10ab0996
corrected to consistent naming: "IMKL"
...
restored xxxROOT to commented-out auto entries.
commented-out currently unused PETSC parts.
added "refblas" and "tmglib" to LAPACK library inclusion (seems to be necessary since 3.2.1).
2012-07-03 12:36:54 +00:00
823013d485
new plasticity: none
...
see material.config for necessary parameters (lattice_structure, elastic constants)
2012-07-03 11:16:38 +00:00
b4103b205d
parts of the material.config can now be set to echo their content back into the log-file (i.e. STDOUT / unit 6)
...
use keyword "/echo/" before first section in the respective parts that you want to see echoed back into the log file.
2012-06-26 10:24:54 +00:00
767842acbf
now real time monitoring of DAMASK_spectral output to screen
...
working with GNU Fortran as well (new checking for return code)
2012-06-25 09:03:19 +00:00
0606845f15
reordered calculation of current stiffness to enable restarting with different resolution
2012-06-22 09:20:23 +00:00
bd462d12c6
fixed some bugs in the regridding routine
2012-06-20 18:33:20 +00:00
d650972904
corrected some bugs concerning the regridding
...
prevented FEsolving from potentially write to a none existing file
started to introduce petsc into the make chain (nothing happens if PETSC_DIR is not set)
2012-06-20 12:49:46 +00:00
f5eb8fcb25
fixed bug caused by the inconsistent sequence of slip and twin systems
2012-06-19 16:06:25 +00:00
481268c8c2
fixed closing of file (unit 222) statement in FEsolving.f90
...
added missing keyword in mesh.f90 with ifndef Spectral statement (needed for Marc and Abaqus)
2012-06-19 14:33:24 +00:00
06be437bc9
added minRes to regridding function and writing out of new geometry file
...
updated f2py wrapper to enable the use of init functions.
added 2 new error messages to io
2012-06-19 13:31:15 +00:00
8537e87b7e
added shell scripts to run tests from crontab, improved numbering in spectral compile tests and added some first files for testing restart capabilities of spectral solver.
...
added configuration file for generation of code documentation using doxygen
restart of spectral solver is fixed and seem to work now also for restart at significant deformation.
spectral solver now gives exit code 2 if some increments did not converge
2012-06-18 15:27:01 +00:00
d9c6f9e134
switch on restartRead logical when requested by "--restart" cmdline switch
2012-06-18 09:27:36 +00:00
380f40561b
first calculation of Tstar still used hard coded Hooke, now usese constitutive_TandItsTangent(...)
2012-06-18 07:26:34 +00:00
b2fd3e1180
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only.
...
Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver.
Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile.
Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 16:10:21 +00:00
eb39d332bd
ULTRA OPTIMIZATION wasnt working anymore, seems to be related to Bertholds update of ws12 and ws13. had to remove -static from optimization string to be able to link again. Added some support for IKLM, but this didn't solve the problem
2012-06-13 17:19:16 +00:00
3ef17c208b
set default lapack to lapack instead of acml, added definition of makro for spectral solver for later use in preprocessor
2012-06-13 13:45:58 +00:00
052b526bde
made compilation of spectral code a command line switch and removed interactive question
2012-06-13 13:42:00 +00:00
7754416b35
now both getSolverJobName and getSolverWorkingDirectoryName use unit 5!
2012-06-13 09:58:06 +00:00
d3d0cfdab1
common blocks from 2012
...
updated setup to also create DAMASK_marc2012.f90
2012-06-13 07:30:27 +00:00
a5c27f22ca
now uses unit 5 for file name inquiery (unit 6 points to stdout in 2012, might be a bug though)
2012-06-13 07:28:43 +00:00
5b7f2e122e
fixed usage of OpenMP function library
2012-06-12 09:44:05 +00:00
fc7b4d6471
new function stateJump, which takes care of immediate changes in the state (deltaState); this introduces discontinuities in the state evolution; therefore this is always and only once done after each integration step, so no evaluation of deltaState for intermediate steps of e.g. the Runge-Kutta integrator; otherwise integration becomes a pain without significant gain in accuracy
...
deltaState now successfully tested for nonlocal model; was not correct for integrators 1,4,5 before
2012-06-06 15:11:30 +00:00
fa7f9866df
removed phase contrast/preconditioning
...
added information on itmin in output, impoved output
set exit code to 0 on successful termination (seems to be unix standard)
exit codes:
0: successful termination
1: error (using IO_error)
2: require regrid
updated the AL solver, still VERY experimental
2012-06-05 16:34:20 +00:00
4b6800b89a
removed some unwanted open statements when writing out the sizeState
2012-06-05 13:13:33 +00:00
01522cf6f2
check for valid elasticity model
...
improved error message in case of unknown elaticity/plasticity model
2012-06-02 14:23:28 +00:00
3af9165b08
useless debugging inforomation (asking for elastic moduli output) is removed
2012-05-31 09:25:04 +00:00
145d971d7e
added some debug output
2012-05-30 08:05:36 +00:00
5cc73a15a9
small correction in debug output
2012-05-30 07:41:22 +00:00
0127828f70
corrected initialization order
2012-05-29 15:08:18 +00:00
e1c5671e1f
relaxed error message triggering such that purely elastic calculations and more than one constitutive instance using hex lattice are possible. no twinning possible if no slip system exists
2012-05-24 14:08:48 +00:00
1003cfa7f8
added missing space in makefile, made removing of old files in Makefile silent and updated files for tests to current versions
2012-05-23 18:08:34 +00:00
c607441717
(likely) fixed a bug in the FFT-based geometry reconstruction. For (hopefully) correct math see Appendix B in paper.
2012-05-22 18:35:15 +00:00
bbf790a0a5
Input parameter 'QedgePerSbSystem' which denotes activation energy for each shear band system is added
2012-05-22 16:10:28 +00:00
9201133913
activated keyword expansion
2012-05-22 12:45:37 +00:00
cec3357e8f
corrected bug causing wrong element construction when using spectral solver. Also improved error messages for invalid resolution, dimension, and homogenization.
2012-05-21 09:06:02 +00:00
20f203f799
allow minimum stable dipole height equal to zero; ensure that maximum stable dipole height is not smaller than the minimum value
2012-05-20 13:57:35 +00:00
5b02d4e8eb
dipole dissociation and formation by change in stress as new mechanism in deltaState; had to add dipole height to state variables, which is however updated by deltaState instead of microstructure; alternatively microstructure had to know the current stress state
2012-05-18 14:35:52 +00:00
4da6907648
moved remobilization of dead dislocations from dotState to deltaState
2012-05-18 13:35:44 +00:00
a5c1624648
check for invalid mesh type once in constitutive_init and not every time constitutive_nonlocal_dotState is called
2012-05-18 13:15:23 +00:00
8c849d62ee
small corrections for how to treat the new deltaState in FPI and euler integration; all integrators successfully tested with j2
2012-05-18 13:00:15 +00:00
abbae76c51
instantaneous jumps in the state by constitutive_deltaState are now incorporated for all state integrators. still they (should) not influence the result, since all constitutive laws simply return zero for the deltaState
2012-05-17 15:25:21 +00:00
351c2c6e65
deltaState depends on the current state, no the state at the beginning of the timestep
2012-05-17 12:18:30 +00:00
f6d5efeed3
removed arguments Fe and Fp from collectDeltaState function call
2012-05-17 11:04:22 +00:00
a54439e3b5
dotState does not have to be reset to zero. this is a remnant from older versions when the dotState for the nonlocal model used to be updated by the neighboring integration point
2012-05-16 15:35:14 +00:00
84d4652a07
all constitutive modules now contain a new function "deltaState", which in the future allows to have an instantaneous and incremental change of the state (additional to the rate based evolution with dotState).
2012-05-16 14:43:26 +00:00
df2d520630
stripping abaqus comments is now aware of damask comments
2012-05-15 14:59:26 +00:00
701cf2e71b
replaced duplicated math entry by missing mesh entry
2012-05-15 14:58:47 +00:00
0d745adfa0
corrected NaN in prec_single.f90 (was already silent but with typo), polished output and added switch in order to check range on all files except of prec.f90 (in which NaN is defined)
2012-05-11 12:46:17 +00:00
7ee368f324
check whether there is any constitutive output
2012-05-11 07:38:20 +00:00
f8f9c089d6
check for NaN in math_QuaternionInSST
2012-05-11 07:37:32 +00:00
babf2647fb
use non signaling version of NaN
2012-05-11 07:35:52 +00:00
ce83026965
corrected bug in fft based geometry reconstruction causing mirrored geometries
2012-05-09 14:56:25 +00:00
d11aa15a67
changed indices counting (fortran to python style, easier division to get rid of periodic copies)
...
corrected f2py pyf file
2012-05-09 10:09:56 +00:00
fbd075dc6e
corrected automatic determination of resolution
2012-05-08 15:12:43 +00:00
c752dd5474
regridding is now working, changed the subroutine into a function
...
changed order of arrays in nearest neighbor search to make it fortran fast
constitutive.f90 and homogenization.f90 write state size out during initialization
setup/setup_processing.py is using byterecl to be compatible with binary files written out by solver
2012-05-08 14:57:06 +00:00
a9a72cee97
fixed bug in nearest neighbor search, corrected error message for kdtree2.f90
2012-05-08 13:16:59 +00:00
eb8265b914
fixed potential division by zero error discovered by our American friends
2012-05-08 07:16:00 +00:00
bdc46a8828
using better measure (norm) of phase contrast for preconditioning
2012-05-07 08:12:13 +00:00
4b18278781
reworked neares neigbor search subroutine, now also works for voronoi tesselation (general nn search in periodic cell)
2012-05-04 13:07:37 +00:00
863f0c766e
removed line continuation causing trouble
2012-05-04 08:19:12 +00:00
b4775249e8
corrected standard check to make f2py working with gfortran
2012-05-03 17:12:36 +00:00
26c6063a2c
utf8 encoding output to screen now for all solvers using intel ifort>10 or any gfortran (old versions might not support it, but we don't use them anyway)
2012-04-28 10:46:41 +00:00
dbeac18df6
no more dropping of comments in Abaqus input file assembly
2012-04-27 14:33:39 +00:00
83e89fba3c
improved regridding, especially interfacing to python (also for nearest neighbor search)
2012-04-24 17:02:27 +00:00
e33c34d86b
corrected wrong integer arithmetics in calculation of coordinates in DAMASK_spectral.f90
2012-04-24 16:59:38 +00:00
83e22c00a2
added missing allocation of slopeLnRate array.
...
changed parsing to lowercase name.
2012-04-20 12:18:38 +00:00
d2c4874db3
several small corrections/polishing
2012-04-20 11:58:41 +00:00
c889d20ba0
added simple preconditioning to improve convergence for high phase contrast materials in standard algorithm
2012-04-20 09:42:57 +00:00
caff3124fd
changed multiplier keyword from "times" to "copies of" to prevent ambiguity.
2012-04-17 10:05:49 +00:00
dbc5a3a3ce
subnodeparent check is now running only over actual number (not max) of parent nodes...
2012-04-17 09:19:44 +00:00
f905a97cdf
fixed bug (causing sigsev) concerning new functions mesh_spectral_get***
2012-04-12 08:03:08 +00:00
8c559cbdc9
fixed bug concerning file handling.
2012-04-11 18:46:36 +00:00
37fa6c2e14
merged code for python and spectral solver interfacing (shared most of it anyway).
...
put functionality for getting header information (dimension, homogenization, resolution) in functions in mesh.f90
2012-04-11 17:28:08 +00:00
a18e5e48dc
added 'times' keyword in function for continuous int values: "4 times 1 => 1 1 1 1", mainly for geom files of spectral solver.
...
corrected name for contin"U"ousIntValues functions
2012-04-11 17:24:50 +00:00
91cfd21c88
corrected some copy and paste errors
2012-04-11 14:12:30 +00:00
9a92d343dc
added Onurs modified description for tausat in j2 law.
...
Polishing phenopowerlaw
2012-04-11 14:01:02 +00:00
f2da887899
added missing ":" in mesh.f90, introduced absolute stress tolerance for spectral solver in numerics.config/numerics.f90
2012-04-11 12:57:25 +00:00
f20cecd421
integrated subroutine for regridding into mesh.f90 and made it available for python
2012-04-10 15:15:46 +00:00
d638c563af
reworked python - fortran interfacing
2012-04-10 13:30:34 +00:00
b17740c9c3
corrected misplaced line for linear guessing
2012-04-06 14:23:06 +00:00
79592d2f0f
get debug info for spectral solver as well
2012-04-05 09:17:09 +00:00
990f547091
improved AL solver, now using guesses for P(x) to improve performance. Changes (and whole solver) still experimental
2012-03-31 12:41:46 +00:00
91a70b0fb3
before turning terminally ill report at which g,i,e crystallite did not converge
2012-03-30 13:16:45 +00:00
c29ae95af7
new version of AL spectral solver (seems to work, but still experimental)
...
new concept of DAMASK for Python: Now using also IO.f90, debug.f90 etc. instead of mimicing their necessary function. This needs DAMASK_python.f90 and DAMASK_python_interface.f90 (At the moment more or less copies of respective spectral files).
polished and renamed the scripts for converging ang files
renamed voronoi_randomSeeding.py to spectral_randomSeeding.py
2012-03-29 19:54:31 +00:00
17826d7c98
now initializing planner flag for fftw with useful value even if init wasn't executed
2012-03-26 10:03:39 +00:00
7947ae36b3
changed default value of err_div_tol
2012-03-22 10:33:54 +00:00
00de182873
corrected if statement to check assembly of input files
2012-03-22 07:44:46 +00:00
44d8282863
corrected reading in of ABAQUS debug modes and made numbering scheme for debugging depending on variables hoping to prevent these errors in debug.f90
...
Put all (now public) logicals in FEsolving.f90 again into one specification statement
2012-03-21 18:04:52 +00:00
15dd860de9
new switch "SOLVER", set it to SOLVER=AL to compile the Augmented Lagrange version of the spectral solver
2012-03-21 18:01:25 +00:00
131c9ac93e
dPdF calculations made consistent with constitutive_TandItsTangent
2012-03-21 15:00:36 +00:00
8a2f2c5a95
stress iteration loop now uses generalized elasticity by calling TandItsTangent
...
the anlalytical tangent calculation should now be adopted to also use TandItsTangent
2012-03-21 10:57:27 +00:00
8d8a8103eb
lastIncConverged, outdatedByNewInc, and cutBack need to be public as well!
...
please keep in mind the FEM interfaces which also need to work!!!
2012-03-21 07:51:07 +00:00
dbdc7ddfa2
debug.config, debug.f90, DAMASK_abaqus_exp.f, DAMASK_abaqus_std.f: changed to new debug scheme (wasn't working)
...
lattice.f90, FEsolving.f90: explicitly defined public functions and variables, all others are now private
numerics.f90: changed output format of real numbers, now instead of 0.1eX 1.0e(X-1) is printed to screen
Makefile: now using correct Optimization flags for OPTIMIZATION=AGGRESSIVE
DAMASK_spectral_AL.f90: improved, but still testing. Stress BCs now seem to be handled correctly
2012-03-20 18:01:31 +00:00
04d83ec9cd
added "-assume byterecl" in Makefile for ifortran to specify with "recl=" the size of the file in bytes instead of 4byte chunk when opening files. (same as in gfortran per default).
...
no important changes in other files
2012-03-20 12:26:21 +00:00
012d568cf8
slightly restructured divergence debug output
2012-03-19 16:41:55 +00:00
632d57cc31
corrected div calculation regarding dimension and resolution
2012-03-19 13:19:15 +00:00
5263366615
adding switch in material.config for short range stress correction
2012-03-15 14:58:12 +00:00
7330031579
corrected special treatment of periodic images in calculation of stress correction
2012-03-15 10:08:08 +00:00
d4463fe56a
shifted location of elasticity part closer to plasticity... (constitutive has been shaken back and forth quite a bit today ;-] )
2012-03-15 09:51:33 +00:00
ea634d978a
adapted comments to recent change
2012-03-15 09:47:32 +00:00
b7fc4fe6e4
fixed one last typo, now it finally compiles, sorry for this!
2012-03-15 09:42:33 +00:00
4d90d90886
last comment also holds for this one
2012-03-15 09:25:15 +00:00
70a44fbbdd
constitutive models need to skip new keyword elasticity when reading their arameters
2012-03-15 09:22:24 +00:00
503f6ed040
i think it's elasticity not elaticity, right?
2012-03-15 08:46:51 +00:00
36edb4dd9f
introduced keyword elasticity in material.config
...
added constitutive_TandItsTangent and special version constitutive_hooke_TandItsTangent
those are however not yet used and need to be tested
2012-03-14 16:16:11 +00:00
9cbbb7cab5
Dead dislocations are treated the same as mobile dislocations for the flux part though they do not contribute to slip. By that the pileup of dead dislocations is able to diminish with time (kinetics are the same as for the glide part; this is not correct but gives valuable results). Also remobilization of dead dislocations at neighbor is taken into account for flux.
2012-03-14 15:32:50 +00:00
6bca2150f2
local stress correction of gradient in dead dislocations and neighboring excess density is additive
2012-03-14 15:24:19 +00:00
06c93435f2
viscosity term in kinetics law proportional to resolvedstress minus forest term
2012-03-14 15:18:36 +00:00
c2f5cebacb
simplified analytic jacobian calculation. removed Lpfrac, time_sensitive. introduced rate_sensitivity flag when calling crystallite_stressAndItsTangent that is currently set to .false. and is to be set according to which dPdF the FE solver is asking for
2012-03-14 13:56:50 +00:00
2b5ed4ab93
corrected name of makefile (first letter upper case)
2012-03-14 11:58:05 +00:00
d2652cae47
multiplication only controlled by screws
2012-03-13 14:19:36 +00:00
433d8a338c
missed several occurences of constitution
2012-03-12 14:43:19 +00:00
c9ed989dad
replaced keyword constitution with plasticity in preparation of upcomming generalized elasticity
2012-03-12 14:09:37 +00:00
efd653fb00
removed old *.output* and *.spectralOut as they are not updated anyway from reference.
...
introduced a numbering scheme for variants
calculated new reference results due to slight changes
2012-03-09 16:30:42 +00:00
ac5dd14c5f
removed some small bugs in IO.f90 (related to initialization of variables)
...
DAMASK_spectral.f90 adopted to new debug scheme, substituted print with write statements
2012-03-09 15:22:52 +00:00
bd9667bd4b
added new, flexible debugging scheme.
...
now all modules have their own debug specification.
compiles and runs, I hope nothing is broken
did a lot of polishing
2012-03-08 20:25:28 +00:00
dec9451b1e
first draft of the Augmented Lagrangian based algorithm, still experimental
2012-03-07 17:37:40 +00:00
2a7888c7e1
removed (in IO.f90) a dangerous initialization statement.
...
Please read http://www.cs.rpi.edu/~szymansk/OOF90/bugs.html#4
for more details.
Other files are just a little bit polished
2012-03-07 10:07:29 +00:00
d00c3c9e19
added error for to IO to substitute stop statement in kdtree2
...
explicitly defined all functions in as either public or private in the modules to have a quick overview on all functions and parameters that are available
2012-03-06 14:52:48 +00:00
17e9698659
added time_sensitive flag to ignore or add time sensitive component to analytic jacobian (should be close to perturbed jacobian when ignored)
...
now uses sub_dt for analytic jacobian calculations
bug fixes
2012-03-01 19:42:43 +00:00
df03dee91c
improved readability, removed archive statements. With new option FASTBUILD=YES build without any warnings etc
2012-03-01 19:34:42 +00:00
211f66a728
added elastic stiffness matrix as crystallite output
2012-03-01 13:06:09 +00:00
040e244993
Added stress-order terms to analytic stiffness
2012-02-27 17:40:28 +00:00
99d6dcecb5
fixed bug in calculation of analytic jacobian (should work much better now). parallelized analytic jacobian calculation loop
2012-02-24 14:07:46 +00:00
f2ee67d03d
disabled multi file optimization when setting OPTIMIZATION=OFF and improved comments on compiler switches
2012-02-24 13:38:15 +00:00
1042ac018f
output values used for Lp_frac and analyticJaco
...
improved comment for Lp_frac on numerics.config
2012-02-24 08:21:18 +00:00
478a6d110c
mixed things up, did not want to commit constitutive_nonlocal.f90 but rather DAMASK_spectral.f90!!!!
...
did a lot of polishing on constitutive_nonlocal.f90 (mostly checked in at last commit), for changes on DAMASK_spectral.f90 see previous message
2012-02-23 17:20:57 +00:00
a98832100f
introduced itmin parameter for spectral code for defining minimum number of cycles
...
removed simplified_algorthim flag because the basic scheme using the polarization field will not be implemented
introduced divergence_correction flag for making divergence criterion resolution-independent (still experimental and not set by default)
corrected output and restart frequency (now modulo on incs of current load case)
2012-02-23 16:43:17 +00:00
989a2b2d39
added default entries for Lp_frac and analyticJaco
2012-02-23 10:53:15 +00:00
28d654d61e
forgot to remove some print statements in previous commit
2012-02-22 20:22:54 +00:00
b9a82156c9
crystallite.f90: can now calculate analytic jacobian by setting analyticJaco = 1 in numerics.config
...
math.f90: added math_mul3333xx3333…
numerics.f90: to read in analyticJaco and Lp_frac
2012-02-22 20:11:09 +00:00
9bf5b9dc86
dotState=NaN enforces cutback, if evolution rates lead to negative densities
2012-02-22 16:08:22 +00:00
21db79ce25
automated copyright information seems to be very complicated, not working yet
2012-02-22 14:06:28 +00:00
e25f605838
still trying to add copyright information by keyword via svn
2012-02-22 13:56:03 +00:00
20fdd302d7
trying to add copyright information by keyword via svn
2012-02-22 13:47:39 +00:00
ca401292e7
2012-02-22 13:46:33 +00:00
ca59c9936f
trying to add copyright information by keyword via svn
2012-02-22 13:43:35 +00:00
b0e2707a94
trying to add copyright information by keyword via svn
2012-02-22 13:40:03 +00:00
d68a3d1869
added LF=UNIX to a bunch of files
2012-02-22 13:30:00 +00:00
d8ffc29236
again: adding pInt, removing redundant use statments, chang in dble to real(,pReal)
2012-02-21 16:31:37 +00:00
9dc730dea4
now getting path separator by counting slashes and backslashes in $PATH environment variable
2012-02-21 16:04:16 +00:00
79663a7f76
polishing: adding pInt, removing unused use-statements etc
2012-02-21 16:00:00 +00:00
23cda48709
cleaning up, removing includes not needed
2012-02-21 15:42:47 +00:00
87a83d82b7
changed assumed arrays (:) to properly defined ones (gfortran 4.7 was complaining) and remove use statements that are not needed
2012-02-21 15:39:36 +00:00
8dc6e256c0
choose textures and phases of example materials according to what the labels suggest
2012-02-21 13:16:59 +00:00
97b2240fe9
take absolute dislocation velocities when testing Courant-Friedrichs-Lewy condition
2012-02-21 13:11:47 +00:00
6c0f9d163b
polishing: removed variable names like 'unit' and 'data' that are keywords of fortran and ensured that integer and real precision matches independent of machine standard.
...
removed cut_off parameter for damask_spectral
removed outpot of derived divergence measures and added RMS output in brackets
added comments and options to the makefile
2012-02-15 18:58:38 +00:00
db06c797cd
store number of outputs for each instance of the constitution in constitutive_[j2/titanmod/...]_Nouput and use this value to loop over all valid outputs when determining the size of the outputs array
2012-02-14 15:19:59 +00:00
49a964aeda
removed public statement in derived data type causing trouble on older compilers
2012-02-14 13:56:35 +00:00
8f22d5a324
corrected geometry reconstruction (fluctuations were scaled wrong) and translated some comments from german to english
2012-02-14 13:43:36 +00:00
d9522bf588
minor changes, substituting implicit type conversions with explicit ones
2012-02-14 12:17:47 +00:00
30c55c3142
added check for unknown keywords again (in agreement with Philip ;-)
...
indeed 'constitution' and '/nonlocal/' are the only keywords which have to be ignored, since they are parsed elsewhere
2012-02-14 09:22:37 +00:00
9b73cb3c65
removed parameter check complaining about unknown keyword as default case. there are just too many keywords that do not trigger a variable assignment to cope with them (e.g. /nonlocal/, constitution, etc.)
...
I suggest to kill similar logic from other files if present somewhere...
2012-02-13 23:30:59 +00:00
c786336af3
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore.
...
all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 17:41:27 +00:00
dd51e1da81
changed calculation of gamma_hat back to (working, but theoretically wrong) order
2012-02-13 17:15:02 +00:00
94100e8d8e
missing line break
2012-02-13 15:21:03 +00:00
156ec4582a
polishing, adding _pInt etc. where applicable
...
post_results now handels zero increment different (like FEM, it is always there even if it is not counted)
2012-02-13 14:18:07 +00:00
f03e7c459c
small polishing, exchanged stops in math.f90 with calls to IO_error
2012-02-13 14:08:07 +00:00
a6864bf599
added missing 'dotF'
2012-02-13 12:41:44 +00:00
df07299f78
fixed bug concerning calculation of gamma operator and improved output to screen
2012-02-13 12:38:46 +00:00
fa32a00d56
changed symmetryID initialization to integer (instead of float) value
2012-02-10 17:46:43 +00:00
b211c13487
added "dotF" synonym to load case parsing.
2012-02-10 17:45:45 +00:00
1cc2315954
restructured algorithm, initialization now not longer within increments, lot of small improvements/polishing
...
makefile now calls compiler with lot of warning flags
2012-02-10 11:59:59 +00:00
37ac7bf1b4
fixing inconsistencies in variable assignments
2012-02-10 11:56:05 +00:00
cff66b5cc3
removed implicit type castings
2012-02-10 11:24:53 +00:00
26b4f886ba
whoops, accidentally removed _pInt in the IO_error calls which where previously added by Martin
2012-02-10 07:58:33 +00:00
ff53b9754b
somewhat better readable format without as much linebreaks
2012-02-10 07:50:29 +00:00
7a23833a39
removed line>132 characters, added _pInt when calling IO_error
2012-02-09 17:28:55 +00:00
0e2894f2b1
corrected handling of highest frequencies, polished and checked for standard compliance
2012-02-09 15:58:15 +00:00
724ec040a2
added pInts and pReals
2012-02-09 15:55:04 +00:00
dced3f9430
changed FFT reporting of dimension and resolution to one line each.
2012-02-09 13:18:59 +00:00
195491aaaa
added missing pInts
2012-02-09 12:35:55 +00:00
a26456f9c0
now handling capitals in restart argument correctly
2012-02-09 12:20:14 +00:00
e7d407c2f6
crystallite_Fp has to be initialized in crystallite_init, cause it is used by constitutive_microstructure
2012-02-03 14:52:09 +00:00
5ddade27fc
changed Peierls stress to more realistic values for fcc
2012-02-03 13:12:45 +00:00
d62eddc0cd
corrected kinetics law and changed parameters. For solid solution hardening there are 3 parameters: the activation energy, the concentration of obstacles that determines the activation length and meanfreepath, and the obstacle size that determines the activation volume. For the Peierls mechanism there is: the width of doublekinks that determines the activation volume and the Peierls stress for edge and screw.
...
Still testing needed to check whether the current formulation makes sense or not.
2012-02-03 12:50:54 +00:00
bbf4f25898
renamed subroutine "mesh_marc_get_mpieOptions" to "mesh_get_damaskOptions" which is now also used for abaqus and spectral input files. The only available option so far is "periodic", which allows for periodic fluxes in the specified direction. Examples for usage (add the following lines to the respective input file, in case of spectral file this goes into the header):
...
- periodicity in x and z direction for marc:
$damask periodic x z
- periodicity in y direction for abaqus:
**damask periodic y
- periodicity in x and y direction for spectral:
periodic y x
2012-02-03 12:37:52 +00:00
7e23f84d2c
new subroutine find_nearest_neigbor, basically a wrapper function for our purpose to kdtree2
...
split up kdtree2.f90 again from math.f90 to make the files better accessible
2012-02-02 15:57:22 +00:00
72aeb2113a
minor improvement on the still not working long (polarization field based) algorithm
2012-02-02 13:20:09 +00:00
faed4ec232
added deallocation of arrays (fftw_free)
2012-02-02 13:19:35 +00:00
2e4f2f3d9c
added _pInt where appropriate
2012-02-02 13:19:02 +00:00
683384681a
doing average correction now in Fourier space, now sure that the constant term is correct.
...
changed order of stress BC calculation/spectral method to avoid average calculation of stress in real space
2012-02-01 20:30:27 +00:00
c6fb2122be
added some comments for further debuggin/compliance with standard checking
2012-02-01 20:28:58 +00:00
c5128e94eb
some f2008 standard related correction i didn't check in last time
2012-02-01 20:20:05 +00:00
800e291240
made code standard conform to Fortran 2008 (ignoring warning concerning comments beyond character 132). Basically, changing "x" format specifier to "Nx" ("1x") plus removing $ format specifier
...
added compiler switches for gfortran and ifort to check for standard conformity
old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
2012-01-31 19:18:55 +00:00
80583fefb5
added compilation_info.f90, to store compilation date,time and compiler info in each file
...
added #include statement at each init() routine
2012-01-31 14:54:49 +00:00
8cf67e1be6
corrected weighting of difference divergence measures, added some additional output and introduced exit code 0 for successful termination.
2012-01-30 20:25:04 +00:00
9464937db7
merge declaration and initialization with standard values
...
corrected handling of $DAMASK_NUM_THREADS
2012-01-30 20:16:19 +00:00
eeda357710
N^2 initialization loop (former spectralPictureMode) rewritten in material.f90
...
additional output in DAMASK_spectral_interface.f90
132 character cut off in constitutive_nonlocal.f90
rounding error in math.f90 complex number initialization (1.0_pReal)*2.0_pReal*pi
new $DAMASK_NUM_THREADS warning in numerics.f90 / IO.f90
polishing in DAMASK_spectral.f90
2012-01-30 13:52:41 +00:00
4edd824d8c
forgot homogenization.f90 in last commit
2012-01-26 13:51:01 +00:00
1330576a01
added new math function "math_deviatoric33" which returns the deviatoric part of a 3x3 tensor
...
renamed some math functions, so that we have a universal naming scheme: for matrix multiplications use an "x" (e.g. math_mul33x3); don't use the "x" to describe the shape of the tensor that the function is applied to (e.g. math_invert33 instead of math_invert3x3)
2012-01-26 13:50:00 +00:00
df931890e0
corrected typos
2012-01-26 12:50:04 +00:00
6fec57bbd7
replaced variable fraction by "timefraction"
2012-01-26 12:48:59 +00:00
5a658d1b82
dislocation velocity output for each dislocation type (edge+,edge-,screw+,screw-)
...
for fcc constitutive_nonlocal_kinetics is called only once and the result is used for each dislocation type, for all other lattice structures we have one call for each dislocation type
2012-01-26 07:43:36 +00:00
e5407894b5
Reworked kinetics. Now there is a universal law which can be used for both fcc and bcc (and probably even hcp). It mainly consists of an athermal forest cutting part , solid solution and peierls as thermally activated processes, and viscous glide. Therefore, lots of new parameters in the material.config. Not sure yet if the values make sense though.
...
Also renamed some of the old parameters.
Unknown constitutive output raises error.
2012-01-25 17:04:37 +00:00
e6495c986b
corrected order of arguments for calling functions from python, small polishing in math.f90 (substituting manual summation by sum() )
2012-01-25 14:31:21 +00:00
fa372523a8
added and restructured comments
...
debugGeneral = .true. now enables the additional output
restructured the debug options
started to implement the long algorithm (with fluctuation field), not working at the moment, can be enabled via simplified_algorithm <1 in numerics.config
corrected calculation of RMS of divergence, now measures in real and fourier space match
2012-01-25 14:27:26 +00:00
884249aba8
removed hint how to patch fftw, added flag for gfortran to check if maximum length of source files do not exceed 132 characters
2012-01-25 14:24:08 +00:00
bd48620de2
improved Curl_fft, corrected Divergence_fft and added math_skew3x3
2012-01-25 10:30:39 +00:00
e7ac99eeca
for spectral solver, --restart XX sets restartReadInc to XX-1, meaning restartReadInc is the step to read and XX the step at which the calculation begins
2012-01-25 09:05:38 +00:00
656d7a68d2
one new error message for spectral solver
2012-01-25 09:00:40 +00:00
3e521e32a6
indroduced 3 more flags for fine control of spectral algorithm
2012-01-25 08:56:46 +00:00
52a43c3b32
improved help output and corrected triggering (-h, --help) of help
2012-01-25 08:54:37 +00:00
0cb90d4926
corrected debug_verbosity glitch (missed ">0" in logical expression)
2012-01-23 13:32:37 +00:00
4980f57fd5
added total Green-Lagrange strain to crystallite outputs
2012-01-20 10:25:35 +00:00
43bd667f78
switched array indices of curl_fft in accordance with math.f90
2012-01-19 20:39:33 +00:00
a13aeb045f
corrected curl_fft subroutine
2012-01-19 20:38:52 +00:00
1032ff3d47
corrected definition of element base node, which was still flawed
2012-01-19 14:15:26 +00:00
6c2a61e489
corrected node coordinates and sorting for spectral method
2012-01-17 16:53:56 +00:00
8739b9522e
dislocation stress does not add to stress field anymore, but is only available as constitutive output for purposes of postprocessing. instead, we now use a backstress term (which is added to the resolved shear stress) that depends on the gradient of excess density on the same slip system.
2012-01-17 10:26:57 +00:00
ab7b9247c7
final merge with edits dropped intermediately from rev 1190.
2012-01-16 15:10:16 +00:00
3a22bf7e27
changed fftw from legacy fortran to new (2003) fortran (calling c routines directly)
...
renamed "steps" consequently to "incs"
moved kdtree2 to math.f90, put original source to private folder
2012-01-13 16:18:16 +00:00
c644b2c24d
corrected rectifyPath function (did not work in case of more than one /../..)
2012-01-13 15:22:42 +00:00
2259f44cb1
added parameter for debugging of FFTW in spectral method
2012-01-13 15:21:24 +00:00
07186e0751
added output of precision to init
2012-01-13 15:20:29 +00:00
f3bb2271c9
parsing of spectral geom file now accepts two-dimensional microstructure definition (plus range indications by 'x to y')
...
For instance:
1 2 3 4
5 6 7 8
9 10 11 12
...
2012-01-12 17:01:24 +00:00
11c71aae86
bugfix release
2012-01-12 16:31:23 +00:00
83ff05c8e8
fixed bugs (sorry...)
2012-01-12 15:08:44 +00:00
2ea3c68d3f
removed spectralPicturemode
2012-01-12 10:36:17 +00:00
7103a44d45
renamed debug variables, plus additional "beautification".
...
renamed "logscale" header info to "log scales" in accordance with plural versions of similar variables.
2012-01-12 10:23:05 +00:00
a7d9d711f6
edited lines exceeding 132 chars (before any comment started)
2012-01-11 16:56:35 +00:00
c54600fd1f
added kdtree2 source and changed makefile to compile it.
...
started to implement the nearest neighbor search for regridding
corrected calculation of divergence in real space.
corrected handling of maximum stress deviation (removed mask)
2012-01-04 17:43:26 +00:00
ee401520d7
corrected divergence calculation. Still some open questions, but improved understanding a lot
2011-12-23 12:30:35 +00:00
6dee2616f5
added help info how to use the executable
2011-12-23 12:29:04 +00:00
99fa0e0be8
corrected calculation of curl (last version was more a dummy function)
2011-12-23 12:23:13 +00:00
e62d083f7a
removed (virtually) dead single-precision branch of the spectral solver.
2011-12-22 13:19:27 +00:00
35bd460e39
added "core" package capability to processing
...
(renamed former f2py modules)
reverted pathinfo...
2011-12-22 10:36:59 +00:00
f463c2da70
added addCurl.py, not sure if it works correctly. still in old (eq. to addDivergence.py) style
2011-12-21 17:25:31 +00:00
b0ba5f7ba3
code setup now takes BLAS in order of precedence from IKML, ACML, and LAPACK.
...
Leave pathinfo blank for BLAS-options that are not available (like IKML typically)
2011-12-20 10:58:51 +00:00
c4a4c5cdca
corrected error in apply_DAMASK_modifications
...
added support for Marc/Mentat2011 (classic)
2011-12-19 16:06:03 +00:00
739c524848
makefile substitution now based on regexp match.
...
condensed makefile syntax.
can now use a system-defined LAPACK instead of ACML (required for OS X...).
fixed bug that 'ULTRA' was not using -O3 for most of the compiling...
2011-12-16 09:11:03 +00:00
a8dece8694
adopted use of general damask package ("import damask" instead of "damask_tools")
2011-12-15 08:52:41 +00:00
b2547e0117
Math inversion used to return zero (math_inv3x3) or error (math_invert3x3) for negative determinant. Now checking whether the absolute(!) value of the determinant is close to zero to avoid singularities, negative determinants are very well allowed.
2011-12-14 08:55:24 +00:00
031a00237f
improved makefile, no directly linking to files of acml
...
corrected default pathinfo
improved test for intel compiler
2011-12-09 16:34:53 +00:00
7d1d2b6229
corrected small mistake in setup_code and makefile
...
test no. 1500, spectral compile test with intel compiler is now working. adjusted run_test and tamask_test
2011-12-09 15:13:27 +00:00
2ceb78c337
introduced new damask_tools method "relPath" and adopted it in setup_processing.py and setup_code.py
2011-12-06 18:38:03 +00:00
ea0fe7b406
corrected 3D visualize (math.f90 part was not working)
...
small polishing of voronoi_tessellation.f90
2011-12-06 17:46:33 +00:00
5ebeb96e85
made DAMASK to work with gfortran:
...
-removed to long lines
-restructured f2py modules and merged make_DAMASK2Python into setup processing
-setup_code.py now sets library path in makefile and asks for compile switches for spectral code
-substituted \ in format strings with $
restructured DAMASK_spectral:
-more logical output and structure of code
-better input for spectral debug parameters
2011-12-06 16:58:17 +00:00
efadf9f728
mainly fixed error in output of spectral results (1:N,…) instead of (N,…)
...
rearranged some logic here and there.
(hopefully) improved readability of debug/standard output.
restarting logic would need some discussion with Martin/Krishna still…
2011-12-04 10:01:32 +00:00
ace6851389
moved all routines from postprocessingMath to math.90, renamed the module to DAMASK, changed scripts and interfaces accordingly.
...
polished math.f90 (mainly added _pInt/_pReal and intent(in/out))
curl_fft is still a dummy function
2011-12-01 12:01:13 +00:00
e738bee1e3
moved todolist to private tree
2011-11-28 08:18:07 +00:00
515986c4d6
renamed w0 and w0_slip to a and a_slip
2011-11-23 14:48:39 +00:00
f685bbba0e
exchanged location of "graincount" in user block.
...
now matches wiki entry:
1. homogenization block
2. grain block
(grain count
sub-block[s] of crystallite and constitutive)
2011-11-23 09:09:00 +00:00
5a1e73b53d
added set_timelimit functionality to fortran-wrapper of FFTW and introcudec it to DAMASK_spectral.f90
2011-11-21 18:48:38 +00:00
566f16b6e9
implemented calculation of divergence in real space, polished spectral debugging
2011-11-21 18:12:40 +00:00
dc6c29a910
important bugfix for reading in results in case of restart
2011-11-17 22:11:05 +00:00
5ef73e164a
restructured algorithm: moved into loop to reallocate fields and replan FFTW in case resolution changes during runtime ==> regridding
...
introduced parameters for selective debugging of spectral code and partly introduced the advanced divergence calculation again which is controlled by debug.config
added switch in numerics to control divergence behavior (uncorrected and corrected by phenomenological factor)
added precision directive to all values I found
2011-11-15 17:54:18 +00:00
60c9293baf
restarting seems to work, spectral solver writes own defgrad to disk.
...
step counting rectified
added additional output of deformation gradient volume min and max
2011-11-11 14:17:43 +00:00
860594d9a4
forgot to multiply shearrate with timestep in order to get accumulated shear
2011-11-09 10:26:00 +00:00
6dc8a4d530
check for LFC only if there is any slip activity at all; also increased safety factor from 1.2 to 1.5
2011-11-09 09:55:39 +00:00
7033e84fc7
new outputs "accumulatedshear", "velocity_edge", and "velocity_screw" (the latter two replace the output "dislocationvelocity")
2011-11-09 09:22:52 +00:00
de96e99bca
corrected determination of restartRead from commandline (now done by FEsolving instead of DAMASK_spectral_interface)
...
recompiled fftw libraries with --enable-shared to make them work with f2py
added draft for compilation test of spectral solver
2011-11-07 18:25:10 +00:00
8bc39fcd48
immobile density output keeps its sign
2011-11-07 15:46:40 +00:00
34adec74e8
corrected wrong indices into state array for velocity
2011-11-07 15:17:58 +00:00
49c0b8a3fd
restructured restarting capabilities
2011-11-07 11:04:57 +00:00
7dfb96a3da
constitutive_nonlocal:
...
dislocation velocities are stored in the state, so we actually now have three "parts" of the state, the basic states that are updated by "constitutive_dotState" come first, then the dependent states that are calculated by "constitutive_microstructure" follow, and finally we have a last part reserved for other variables that just use the memory reserved by the state array and are updated somewhere else.
constitutive:
LpAndItsTangent does not need the full state, but only the local state, so changed that at least for the nonlocal constitutive law
2011-11-04 13:12:17 +00:00
9d1bc584d0
corrected stress integration scheme: now use norm(Lpresiduum) as a target function for Armijo's rule instead of whole tensor Lp; also corrected the guess for the improvement in Lp
2011-11-04 12:57:12 +00:00
ca3d21a3b6
Depending on which state integrator one uses for the stiffness calculation, the initial state has to be chosen accordingly: e.g. for FPI choose last converged state, but for explicit RK choose converged state from start of increment (in case of explicit euler no state integration at all, but only stress integration). For this purpose we also need to remember "Fe" which now follows the cutbacking procedure as it is used for "Fp".
2011-11-04 12:44:50 +00:00
ee7022d8cf
correctet random seed generation to work with gfortran.
2011-11-04 10:29:35 +00:00
c2eac36b48
started to implement restart facilities for spectral solver.
...
restart write is on per default
restart read is switched on by using --restart or -r INT where INT gives step at which the calculation should restart
setting INT to a value <1 will turn restart write off
2011-11-03 19:32:11 +00:00
b9647b2584
moved parts into new "lib" folder
2011-11-03 13:21:11 +00:00
680ba9082f
removed deadlock when calling IO_warning(33)
...
polished IO_error and IO_warning
checked OpenMP critical statements in DAMASK_spectral.f90
corrected writing of headed in DAMASK_spectral.f90
2011-11-02 14:38:42 +00:00
447e69019c
Introduced environment variable DAMASK_ROOT.
...
It is set in the DAMASK root folder by running damask_env.sh
Much needed in the testing routines so far (try ./testing/run_tests.py)
damask_env.sh could also trigger other scripts to get to a working setup after fresh checkout. For example it could run
./processing/setup/setup_processing.py
./code/setup/setup_code.py
if it finds that we have a fresh checkout.
2011-10-27 17:55:42 +00:00
15c356c3a7
some small improvements regarding the rotation of the loadcase frame
2011-10-25 13:38:24 +00:00
c13aa2a829
first try of implementing a rotation of the loadcase coordinate system. Seems to work so far for one loadcase and homogeneous materials.
2011-10-24 18:26:34 +00:00
0f34d14bee
again edited the makefile, no there is more flexibility in defining the libraries (FFTW and ACML)
...
added the source of fftw-3.3.tar.gz to fulfill the GPL
set_python_env.py was forgotten during last commit (for testing)
2011-10-24 16:57:51 +00:00
8ac1891b3c
moved DAMASK_NaN to prec.f90 respectively prec_single.f90 as it is precision dependent
2011-10-20 16:46:11 +00:00
ac342ad682
worked on the updating on increments, does not work properly until now
2011-10-19 09:05:02 +00:00
0a46741a77
changing header to correct number of increments
2011-10-18 16:42:06 +00:00
9d3f74ce5f
polishing
2011-10-18 14:46:07 +00:00
7746390688
using keywords to indicate geometry and loadcase
...
enabled finetuning of FFTW
added some debugging options
reading in rotation of boundary conditions
using header in geometry file
corrected error in calculating tolerance for stress BC
polishing of output, variable declaration, and variable names
2011-10-18 14:45:32 +00:00
Pratheek Shanthraj