0503a80943
avoid the use of global variables
...
better to define variables where they are used
2019-03-25 15:54:51 +01:00
12723d7247
running test (hopefully)
2019-03-25 13:10:56 +01:00
010fd0b862
using config_numerics instead of global values
2019-03-25 09:36:59 +01:00
af611d7ca4
Merge branch 'Dislotwin-Names-as-in-paper' into 'development'
...
Dislotwin names as in paper
See merge request damask/DAMASK!66
2019-03-25 09:16:36 +01:00
29fff6b158
fixed reporting and restart
2019-03-25 08:09:09 +01:00
19af34e054
cleaned
...
- no Pint
- consistent indentation
2019-03-24 12:07:51 +01:00
293f869fe5
improved signal handling
...
- possibility to catch SIGTERM
- functions to set SIG(TERM/USR1/USR2) explicitly
2019-03-24 11:59:00 +01:00
728dac5a48
separate module for linked list
2019-03-24 11:40:05 +01:00
dada4e69b6
consistent use of 2 blanks, no pInt
2019-03-24 11:28:20 +01:00
320f39925a
modernized
...
- no pInt
- consistent indentation by 2 spaces
- no leftovers from old file parsing
2019-03-24 11:18:59 +01:00
0f2013e78a
modernized
...
- no pInt
- consistent 2-blank indentation
- use of parameter structure
2019-03-24 11:01:27 +01:00
c1d4b64b13
better use intrinsic F2003 features
2019-03-24 10:48:46 +01:00
2e164a1ddd
need to write out these tensors for restart
2019-03-24 09:51:47 +01:00
0fecac4f2a
load case rotation works for polarisation solver
2019-03-23 16:47:26 +01:00
a06be13d49
following structure of mech_spectral_basic
2019-03-23 15:39:28 +01:00
7ccb5c1fa3
enables load case rotation feature
2019-03-23 14:25:05 +01:00
5a3689770a
restart for grid mech FEM now working
2019-03-23 10:46:56 +01:00
d55a7da592
renaming "spectral" to "grid"
2019-03-23 09:27:58 +01:00
593fa24bad
remove global variables
2019-03-23 06:53:29 +01:00
798c5bb633
initial takeover from older branches
2019-03-23 06:21:18 +01:00
72476ae796
internal (private) functions at the end of the module
2019-03-22 16:02:00 +01:00
b8117d4057
LpAndItsTangent called kinetics_twip a second time instead of kinetic_trans
2019-03-22 15:31:29 +01:00
5050f21a6e
[skip ci] more renames for consistency
2019-03-22 12:28:53 +01:00
6966e68403
more renames (following DAMASK paper)
2019-03-22 11:40:52 +01:00
f50e6fe5ad
[skip ci] adjusting to disloUCLA
2019-03-22 11:32:55 +01:00
450a0565d3
internal variable names also adjusted
2019-03-22 11:06:08 +01:00
bd6b7e1854
correct signs (same behavior, but full math)
2019-03-22 10:58:54 +01:00
c9c9079076
fixed indentation
2019-03-22 10:55:17 +01:00
fa96042320
correct names for shear rates
2019-03-22 10:49:24 +01:00
f12b66b409
wrong keyword
2019-03-22 09:26:39 +01:00
28caf5ed4d
final rename (for the moment)
2019-03-22 06:57:32 +01:00
5dc5a25ab3
simplified dotState
2019-03-22 06:48:38 +01:00
ad563b99a8
Merge branch 'development' into DisloUCLA-Names-as-in-paper
2019-03-21 08:12:36 +01:00
17f955d3e8
still renaming
2019-03-21 08:07:09 +01:00
25f2d78656
final renames (for the moment)
2019-03-21 00:15:10 +01:00
9936b382fd
more renames
2019-03-20 21:51:52 +01:00
97f6566d98
more renames
2019-03-20 16:52:43 +01:00
facef25f8e
renaming to fit paper and/or disloUCLA
2019-03-20 09:46:49 +01:00
349acce9f2
more renames to follow dislotwin and/or paper
2019-03-20 09:38:38 +01:00
5f53147e96
wrong assignmen (scalar to vector)
2019-03-19 14:56:36 +01:00
8a07ff4617
fixed copy and paste errors
2019-03-19 14:17:06 +01:00
98d25ae48a
more name adjustments
2019-03-19 07:00:03 +01:00
1b53040f5e
intermediate results should not be stored
2019-03-19 06:52:06 +01:00
d22f41eeaa
better readable
2019-03-19 06:25:21 +01:00
d9e497bdd8
prefactors were not used/not mentioned in the paper
2019-03-19 06:21:40 +01:00
a12417a091
as in dislotwin
2019-03-19 05:46:47 +01:00
fc997554ba
Simplified tangent calculation, thx to Karo
2019-03-18 23:11:28 +01:00
f9e47a94aa
no pInt
2019-03-18 22:57:23 +01:00
fbc607e14d
no pInt
2019-03-18 22:53:24 +01:00
7d40d13b4c
simplifying
2019-03-18 22:44:54 +01:00
5f85a65fe6
shorter name, inline with the paper
2019-03-18 22:37:32 +01:00
3eb7f868bf
pInt not needed
2019-03-18 22:17:11 +01:00
76dee8cb81
renaming according to paper
2019-03-18 22:08:41 +01:00
66aa9399a7
don'r rely on halton sequence
...
not really trustworthy as we saw some pattern for higher dimensional
data
2019-03-17 18:06:41 +01:00
6d268b7b37
some polishing
2019-03-17 17:59:01 +01:00
dac4f5cd22
syntax polishing
2019-03-17 17:02:08 +01:00
5f41d6d9b4
no pInt
2019-03-17 13:35:41 +01:00
d7739fa8f8
no derived quantities in postResults
...
preparing for HDF5 out
2019-03-17 13:29:58 +01:00
52b54ddf23
direct access to state variable
2019-03-17 12:36:15 +01:00
fa513778c0
array access was wrong
...
now using the rectified dislocation density from "getRho". This results
in a slightly more conservative sensitivity check
2019-03-17 11:51:26 +01:00
730e7d96c0
better readable
2019-03-16 21:58:30 +01:00
8f89827573
improved readability
2019-03-16 19:09:22 +01:00
f079e6f9c0
simpler logic for shortrange stress correction
2019-03-16 16:29:16 +01:00
117f4b9625
more functions relying on getRho
2019-03-16 15:46:39 +01:00
5da017e79f
using new funtionality to get rho
2019-03-16 15:08:50 +01:00
eb2646ca9c
improving readability
...
- arrays to access specific dislocation types
- function to access and clean rho
2019-03-16 13:13:48 +01:00
510c0da02c
more systematic names
2019-03-16 08:55:25 +01:00
a4d7ce48b3
Decided on one DAMASK logo
2019-03-13 22:23:09 +01:00
cba02d91b9
no need to import pInt
2019-03-13 07:00:20 +01:00
c7f33f4696
no pInt
2019-03-13 06:46:59 +01:00
81cfa31b31
[skip ci] with DAMASK ASCII art
2019-03-13 06:16:31 +01:00
fb6a6e9db5
[skip ci] corrected year
2019-03-12 22:56:09 +01:00
7d23b77ad0
Merge branch 'development' into MiscImprovements
2019-03-12 22:37:53 +01:00
7cb2203a38
pInt not needed anymore
2019-03-12 22:29:03 +01:00
40fda62efc
parsing material.config and debug.config
2019-03-12 22:27:45 +01:00
62694eddf8
clearer structure
2019-03-12 21:48:33 +01:00
9a38951725
finished renaming: spectral -> grid
2019-03-12 18:56:28 +01:00
fdc8a848a5
no pInt + same indentation everywhere
2019-03-12 11:36:18 +01:00
818338ca93
new label needs new tests, will be done later
2019-03-12 11:17:15 +01:00
1ece0a1dfd
better readable
2019-03-12 09:36:54 +01:00
1df8b22e23
clearer names
2019-03-12 09:28:06 +01:00
2353545779
using new names
2019-03-12 06:06:59 +01:00
c57bfd34e9
no need for long names
2019-03-12 05:53:12 +01:00
6495276b81
bugfix: rename from "solution" to "solution_vec" was incomplete
2019-03-12 05:52:13 +01:00
643ed89447
not needed anymore
2019-03-12 00:07:44 +01:00
2505c02c75
bugfix
2019-03-11 23:55:04 +01:00
94cf563141
new name
2019-03-11 23:51:04 +01:00
011af1f686
adjusting names
2019-03-11 23:37:06 +01:00
23043da98c
more sensible names
2019-03-11 23:10:40 +01:00
6a82a0a33e
proper indentation
2019-03-11 23:04:00 +01:00
1fb1032127
no pInt
2019-03-11 22:58:11 +01:00
18fe8c34ee
fortran fast storage of interaction matrices
2019-03-11 22:41:59 +01:00
0cdcc4de11
no pInt any more
2019-03-11 17:35:08 +01:00
f203add899
not needed
2019-03-10 12:58:07 +01:00
340617ab65
unifying notation
2019-03-10 12:05:52 +01:00
550b6510a5
better name
2019-03-10 12:05:52 +01:00
c8f426a875
use variables from mesh object
2019-03-10 12:05:52 +01:00
927f947c2a
better readable
2019-03-10 10:05:47 +01:00
8661d6e82f
PGI complaines, forall is deprecated anyway
2019-03-10 10:05:47 +01:00
11662033c3
seems to cause problems with PGI as well
2019-03-10 10:05:47 +01:00
60f4f9f39c
norm2 for PGI
2019-03-10 10:05:47 +01:00
05b4dd1973
correct type casting
2019-03-10 10:05:47 +01:00
714c9b1ecb
PGI does not no "do concurrent" (yet)
2019-03-10 10:05:47 +01:00
388e661433
use explicitly pReal
2019-03-10 10:05:47 +01:00
0118fefe6e
wrong type
2019-03-10 10:05:47 +01:00
96c4599dc7
norm2 is (yet) not available in PGI
2019-03-10 10:05:47 +01:00
34660599a1
dummy HDF5 output for all plasticity laws
2019-03-09 20:43:31 +01:00
7643d66654
bugfix, avoid error
2019-03-09 16:22:57 +00:00
55d55a156b
following numpy syntax
2019-03-09 16:19:56 +00:00
121bafd989
required for HDF5 output
2019-03-09 15:55:25 +00:00
22a3596561
simplified, trying to get rid of all public variables
2019-03-09 15:12:59 +01:00
c74f453486
public variables not needed anymore
2019-03-09 15:12:59 +01:00
1bf31598c5
avoid usage of lattice variables
2019-03-09 15:12:59 +01:00
eba763cf38
not needed anymore
2019-03-09 15:12:59 +01:00
f0d03a41ba
fracture modes are calculated differently
2019-03-09 15:12:59 +01:00
7bfd7a42ea
empty file needs special case for Ifort
2019-03-09 13:43:56 +01:00
383e1befd5
polishing and extending citations
2019-03-09 11:11:40 +01:00
1ba27cf62d
same reporting style, more error checks
2019-03-09 11:11:40 +01:00
6f3771f6c4
Allreduce better suited than Bcast
2019-03-09 11:11:40 +01:00
66e6a6ec68
cleaning
2019-03-09 11:11:40 +01:00
0d08659b2a
general cleaning
2019-03-09 11:11:40 +01:00
2394880741
Tstar renamed to S (following the DAMASK paper)
2019-03-09 11:11:40 +01:00
02c7b1056a
use central functionality
...
IO function reads numerics.config and debug.config
2019-03-09 11:11:40 +01:00
ae5ea87ab1
cleaning
2019-03-09 11:11:40 +01:00
2621689843
correct initialization
2019-03-09 08:01:20 +01:00
af707c671c
improved IO functionality
...
- naming for file opening follows python
- damage modules do not read from file any more
2019-03-08 23:16:56 +01:00
48cfc35996
polishing
2019-03-08 23:16:35 +01:00
09a7427193
temporarly disabled restart
2019-03-08 23:16:08 +01:00
363a95d5b7
not needed
2019-03-08 19:07:19 +01:00
67dcb6d2d6
not needed
2019-03-08 19:07:19 +01:00
622372bd64
where within forall does not work with PGI
2019-03-08 19:07:19 +01:00
0f6bf38299
unused functionality
2019-03-08 19:07:19 +01:00
ce0e84f418
was not used anymore
2019-03-08 19:07:19 +01:00
de330517eb
rank not supported by older compiler/older dialects
2019-03-08 07:42:13 +01:00
3b1328163c
cleaned
2019-03-07 23:19:39 +01:00
de6fd605ee
is not used anywhere else
2019-03-07 22:47:45 +01:00
a4cdbab7cf
not needed
2019-03-07 22:44:33 +01:00
4a636dbd99
not used at all
2019-03-07 22:41:07 +01:00
8224797e75
simplified
2019-03-07 22:31:54 +01:00
f0eeb3d9b4
using naming convention of numpy
2019-03-07 22:22:49 +01:00
9e05b2fcf0
using new name
2019-03-07 22:20:38 +01:00
b03208bc69
unused function
2019-03-07 22:19:08 +01:00
3b8b83fbd9
FLOAT is not defined anymore
2019-03-07 22:18:29 +01:00
a80b57c96b
forgotten during removal of vacancy/porosity/hydrogen
2019-03-07 20:51:14 +01:00
215598ade9
consistent formatting: always indent by 2 spaces
2019-03-07 20:39:33 +01:00
81b971374b
no need to use pInt
2019-03-07 19:34:27 +01:00
98843587e5
Merge branch 'FWBW-default-2' into development
2019-03-07 18:37:58 +01:00
d17c1a6d17
comment was wrong
2019-03-07 18:37:22 +01:00
7a083c4098
[skip ci] more general names and procedure
2019-03-07 11:02:27 +01:00
4ee484b6e7
correct scaling for fluctuations
2019-03-07 07:14:45 +01:00
21bbba1575
cleaning
2019-03-07 07:09:00 +01:00
ae3de821b4
bugfix: synchronizatopm of dPdF_min and dPdF_max was not correct
...
-before: using componenwise min/max among different processors
-now: identify the processor that holds the minimum/maximum of the
norm
2019-03-07 07:01:09 +01:00
ccb62da24a
kind-ID does not need to coincide with the number of bytes
2019-03-06 16:33:39 +01:00
a965c46025
improved functions for floating point comparison
...
- less stric tolerance for comparison to zero
- better readable
- avoid "merge" on optional arguments (not safe)
- "equal" and "notEqual" are now symmetric (assignment of <= and < is
arbitrary)
2019-03-06 15:57:42 +01:00
51f8b1961f
simplify integer precision handling
...
essentially, it should be ok to always use the default integer (which is
32 bit unless using MSC.Marc) and use 64 bit integer only for special cases where an overflow
could happen
2019-03-06 15:52:52 +01:00
05eb80d38c
pLongInt was not used
2019-03-06 15:49:31 +01:00
c9e7311b42
no need to use pInt here
2019-03-06 15:47:48 +01:00
977f61452b
compiler-independent defintion of real and integer kinds
...
real(8) does not neccessarily mean a real with 8 byte (but for gfortran
and ifort it does)
2019-03-06 15:25:47 +01:00
19da2b911d
flux subroutine for Abaqus
...
related comments
2019-02-27 09:23:05 +01:00
b7ee4318b7
copy and paste error
2019-02-27 07:22:59 +01:00
6e9b745ca1
shorterned line to avoid compile time truncation warning
2019-02-26 21:22:14 -05:00
ff5ac56cfb
shortened too long lines
2019-02-26 15:31:47 -05:00
cfb2770b93
merged and added correction to FreeSurface.config example
2019-02-26 13:56:49 -05:00
cb9543dff7
more elaborate debug labelling
2019-02-26 13:47:46 -05:00
56e2c1264b
Merge branch 'development' into New-Thermal
2019-02-26 07:54:45 +01:00
6fab99bca5
Merge branch 'development' of magit1.mpie.de:damask/DAMASK into development
2019-02-25 20:10:38 +01:00
d83847446d
Merge branch '32_NewStyleNonlocal-4' into development
2019-02-25 20:06:20 +01:00
7115382729
not used anymore
2019-02-24 10:08:09 +01:00
7903e2b65f
dependencies got mixed up
2019-02-23 11:31:53 +01:00
93ae5cbd07
Merge remote-tracking branch 'origin/development' into 10-consistent-orientation-conversions-3
2019-02-22 23:05:36 +01:00
b1bb68d523
cleaning
2019-02-22 21:07:00 +01:00
ad0ed4fdec
bugfix: wrong state was allocated
2019-02-22 21:06:37 +01:00
194824fd0f
WIP: cleaned
...
no file reading
getting rid of a number of obsolete dependencies
2019-02-22 20:37:41 +01:00
e7268ce109
simpler structure:
...
- do not read file
- use function for allocation
- do not constantly convert (3,3) <-> (6)
2019-02-22 15:37:42 +01:00
af4ea76006
using central allocation facilities
2019-02-22 15:21:48 +01:00
aa2bd4fc4c
Merge branch 'development' into New-Thermal
2019-02-22 10:17:34 +01:00
db9016d146
avoid repeated loops
2019-02-22 10:02:43 +01:00
4d45038358
better readable
2019-02-22 09:21:04 +01:00
5e369aa220
avoid use of new variables in deprecated code
2019-02-22 08:32:12 +01:00
beb73c7882
not needed
2019-02-22 07:37:08 +01:00
da8a1d5973
leaner interface
2019-02-21 21:32:22 +01:00
6938864c4b
pointers allow easier access to state variables
2019-02-21 20:37:49 +01:00
d686384d17
let lattice.f90 do the job
2019-02-21 19:18:06 +01:00
21d0ef2fb5
use microstructure/dependent state
...
introduced only partly, otherwise the uncommon calling sequence in nonlocal leads
to a change in behavior
2019-02-21 05:55:03 +01:00
cb2d2b02dc
re-ordered and cleaned
2019-02-21 00:24:35 +01:00
3fa699ad22
indices were mixed up
2019-02-20 20:17:55 +01:00
2d51c0595b
don't parse material.config any more
2019-02-20 19:03:20 +01:00
6f135ea632
no random-multiplication anymore
...
from our current understanding, the implementation of random nucleation
was strongly dependent on the numerical method and the time stepping
2019-02-20 17:58:11 +01:00
871ba90654
initialization can be done internally
2019-02-20 17:50:26 +01:00
eb394b3139
same name in all models
2019-02-20 14:54:26 +01:00
838faca819
using structure for output
...
avoids waste of memory in case of multiple instances
avoids explicit dependence on ip and el
2019-02-20 13:32:08 +01:00
e6e019e48a
transition to param structure
2019-02-20 09:13:50 +01:00
d29b37f517
provide slip system components as functions
2019-02-20 07:53:34 +01:00
a896ed91f8
simplified/not needed
2019-02-20 07:33:19 +01:00
d0b0e3be3b
simplified
2019-02-20 00:41:44 +01:00
649750a1c9
let lattice to the work
2019-02-19 23:55:59 +01:00
e8ac2d0d97
limiting inter-module dependencies
2019-02-19 10:47:12 +01:00
41899f6d33
using more parameters from smart structure
2019-02-19 10:31:14 +01:00
6bcd4a77d2
complex pointer structure for state
2019-02-19 09:43:48 +01:00
1a5711e246
using more parameters from parameter structure
2019-02-18 22:55:31 +01:00
ae9d8e4e8d
cleaning
2019-02-18 10:28:08 +01:00
435dce220c
move stress conversion one level up
...
should be totally avoided
2019-02-18 07:24:56 +01:00
8a30441a52
Merge branch 'development' into 32_NewStyleNonlocal-3
2019-02-18 07:14:11 +01:00
690fef6f06
avoid publicly avaialbe data, rather provide setters and getters
2019-02-17 20:38:57 +01:00
44e41465d0
use functions from lattice to calculate slip systems
...
don't rely on internal coding for collinear systems
2019-02-17 17:56:01 +01:00
c4b3ac3afb
slip system definition for bcc still needed
2019-02-17 17:04:26 +01:00
d3e6430b94
only used internally
2019-02-17 14:30:58 +01:00
553b1c7743
stress tensor was accidentally still converted
2019-02-17 13:16:00 +01:00
7ad866b90f
not needed any more
2019-02-17 12:16:12 +01:00
cf32e7d1f5
use parameter structure and avoid conversion 33<->6
2019-02-17 12:15:46 +01:00
530f4f2804
Merge branch 'New-Damage' into 'development'
...
New damage
See merge request damask/DAMASK!59
2019-02-17 10:09:46 +01:00
db9d5c898a
[skip ci] typo
2019-02-17 10:08:02 +01:00
0f319e2cf6
fixed state size and output size
2019-02-16 23:18:53 +01:00
c7abe55944
was not needed
2019-02-16 22:09:06 +01:00
2584f85760
parameters are stored in parameter structure
2019-02-16 18:38:13 +01:00
0ba8ebff1e
Merge remote-tracking branch 'origin/development' into 32_NewStyleNonlocal-3
2019-02-16 18:12:38 +01:00
63e2ea7d8f
was not use (anymore)
2019-02-16 12:49:28 +01:00
77d60be127
avoid superfluous reporting
2019-02-16 11:30:56 +01:00
efe9823e62
clearer logic for preprocessor statements
2019-02-16 10:43:02 +01:00
af83427e8c
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-02-16 10:25:42 +01:00
61032b5fd8
wrong jump position
...
probably a copy and paste error
2019-02-16 10:24:12 +01:00
9a3921ea84
ifdef statements grouped together
...
unless they belong to a group of functions, like opening files or
interpreting lines
2019-02-16 10:20:53 +01:00
0fd5476883
doxygen interprets comment as doc string
2019-02-16 06:42:08 +01:00
afdaac47af
avoid disturbing reporting
2019-02-15 22:54:38 +01:00
d78bf18483
simplified output
2019-02-15 07:25:25 +01:00
1567b0ee94
was not used
2019-02-15 07:03:52 +01:00
bc0bc06aea
polishing
2019-02-13 10:16:06 +01:00
5b0cdf294d
delta state is needed
...
not sure if the offset handling is correct
2019-02-13 10:11:25 +01:00
dc6f18c3f8
cleaning
2019-02-13 10:03:28 +01:00
d366651873
file reading not required anymore
2019-02-13 09:57:12 +01:00
47a9d88a15
read vector-parameters
2019-02-13 09:19:37 +01:00
3ca34c8f80
simplified
2019-02-13 09:09:30 +01:00
a421525d15
preparing storage of output parameters
2019-02-13 08:06:22 +01:00
f34c10a477
sdot_0 already available as parameter
2019-02-13 07:36:36 +01:00
b3e705e628
polishing, fixed typo
2019-02-13 07:34:16 +01:00
aa8d218ce7
was never used
2019-02-13 07:28:28 +01:00
6a0d739d48
use parameters from param structure
2019-02-13 07:24:48 +01:00
61baa66c38
avoid code duplication
2019-02-13 07:22:37 +01:00
9574dfae2d
avoiding repeated reading of material.config
2019-02-13 07:04:13 +01:00
55cef533f1
conversion 3x3-matrix <-> 6-vector not helpful
2019-02-13 00:00:07 +01:00
01fe7a9731
Merge branch 'development' into New-Damage
2019-02-12 23:37:39 +01:00
c9fc7ea982
cleaning
...
trying to find logic with less dependencies on the various
mappings
2019-02-12 23:35:22 +01:00
69d53ed869
determining output size was overly complicated
...
general cleaning
2019-02-12 23:20:24 +01:00
be7f740e65
Merge branch 'development' into New-Thermal
2019-02-12 22:52:21 +01:00
1a471bcd8a
signal handling implemented
...
allows to trigger action in running simulation, i.e. writing restart or results
2019-02-11 18:46:14 +01:00
87f3e3f621
more flexible and user friendly
2019-02-11 10:08:34 +01:00
af28e9cdd9
not needed anymore
2019-02-09 17:23:56 +01:00
c4eef520fc
initialize all variables
2019-02-09 17:21:11 +01:00
09859f1b12
wrong variable rename (was forgotten)
2019-02-09 16:53:05 +01:00
de26e41684
some first steps to support debugging with the PGI compiler
...
norm2 and sum for initialization are not supported yet, need fixes
2019-02-09 15:02:07 +00:00
8167f09ec6
using functions as far as possible
2019-02-09 12:01:31 +01:00
5d9c3fcf27
finalize for write
2019-02-09 09:44:41 +01:00
73749dd788
merged also finalization
2019-02-09 09:38:49 +01:00
d934f2b141
also modularize write
2019-02-09 09:03:31 +01:00
c668260c37
avoiding code duplication
2019-02-09 08:05:29 +01:00
36662f8419
more generic formulation (works for all dimensions)
2019-02-09 07:50:33 +01:00
542ab946cc
[skip ci] not needed
2019-02-04 19:05:02 +01:00
3f61c97ded
don't support non-DAMASK materials
2019-02-04 18:58:36 +01:00
453f4556e5
bracket was missing
2019-02-04 00:12:27 +01:00
5320803842
bugfix: valid range for unit quaternion range is [-1,+1]
2019-02-04 00:06:38 +01:00
a57aa7985a
wrong name
2019-02-03 18:11:16 +01:00
59dd9b16e1
cleaning
2019-02-03 16:40:15 +01:00
b0b1ea3b84
input argument not needed any more
2019-02-03 14:23:32 +01:00
ec23fca057
it's a property of the element, not of the mesh
2019-02-03 14:22:06 +01:00
2d0c74d7d9
implicit dependencies made explicit
2019-02-03 14:22:06 +01:00
2aba6faf40
cleaning and making dependencies clear
2019-02-03 14:22:06 +01:00
91992debf2
Marc now works also with the module
...
reason, why it did NOT work earlier still not clear
2019-02-03 13:30:04 +01:00
b9f93d5460
is now a subfunction
2019-02-03 11:22:23 +01:00
d605adc92e
avoid the use of global variables to make dependencies clear
2019-02-03 11:12:23 +01:00
f45ba0ff5b
functions specific for MSC.Marc and/or Abaqus
...
these functions are very specific for the input files and might be
better located in the respective mesh module
2019-02-03 08:27:20 +01:00
2c7553653b
only used by MSC.Marc
2019-02-03 08:11:19 +01:00
40ad1aef2f
was not used
2019-02-03 08:07:58 +01:00
a92937a7e3
grid does reading in of geometry independently
2019-02-03 08:06:53 +01:00
1eb30f3ae7
re-ordered according to calling sequence
2019-02-02 20:49:15 +01:00
bb135463c4
using data from theMesh instead of local variables
2019-02-02 20:45:19 +01:00
35c37ef9dc
forgotten format specifier
2019-02-02 17:39:31 +01:00
abedb5c3db
ordered according to calling sequence
2019-02-02 17:24:18 +01:00
16cb9ebed9
no need to read homogenization info extra
...
but currently, it is not very elegant
2019-02-02 17:24:18 +01:00
d51a379376
avoid jump labels
2019-02-02 17:24:18 +01:00
819ec40b44
clearer order:
...
1) parse file
2) set up element
3) set up mesh
2019-02-02 17:24:18 +01:00
07cca77fce
left over jump marks
2019-02-02 17:19:12 +01:00
3edbfc1cb5
bugfix:
...
infinite loop for geom file without new line at end
also, a lot of cleaning
2019-02-02 15:10:35 +01:00
933136ec1e
nNodes form element is used already
2019-02-02 13:10:21 +01:00
b514bf78a5
avoiding duplicated variables
2019-02-02 12:31:07 +01:00
4f2a3d7f55
unused variables
2019-02-02 12:23:53 +01:00
dcd16dda70
variables from mesh object
2019-02-02 12:15:05 +01:00
326cbd0398
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-02-02 11:52:06 +01:00
8962635136
use new elem/mesh variables
2019-02-02 11:50:07 +01:00
94a24e45ee
bugfixes:
...
theMesh%Nelems need to be set (using an intermediate function until a
routine does that)
spectral.geom file can have "N+n to N" (backwards counting)
2019-02-02 11:46:38 +01:00
3a5a50cb03
use variables from theMesh
2019-02-02 10:53:55 +01:00
7a8d98d135
using theMesh (object oriented mesh description)
2019-02-02 10:35:10 +01:00
f0b5b9fd59
unused variable
2019-02-02 10:34:38 +01:00
e17278a926
using new mesh structure (initial test)
2019-02-02 10:11:18 +01:00
9975048f29
better avoid jump marks: Abaqus, Part 2
2019-02-02 09:56:11 +01:00
5810dce618
better avoid jump marks
2019-02-02 09:29:58 +01:00
4a28284058
only parse geom file once
2019-02-02 09:18:01 +01:00
3d750e7933
overwriting of init did not work
2019-02-01 21:56:38 +01:00
9a4e9e62b6
using new rotation class
2019-02-01 20:28:51 +01:00
08009079ff
avoiding numerical errors (if quaternion norm is > 1.)
...
use consistently "self" instead of "this"
function for misorientation
2019-02-01 20:27:29 +01:00
feb87c7db8
same name as in the python module
2019-02-01 19:09:17 +01:00
407f94082f
no need for orientation class at the moment
...
implement only if we need symmetry aware operations
2019-02-01 16:52:42 +01:00
8e0556fe3e
[skip ci] nicer reporting
2019-02-01 12:43:14 +01:00
614a8d694c
re-implement mesh reporting later on in mesh_base
2019-02-01 12:28:18 +01:00
5f8b110f63
initialize mesh and element
2019-02-01 12:24:23 +01:00
b87a09a466
not needed
2019-02-01 11:22:06 +01:00
06f67ce500
orientations module was not compiled but is needed now
2019-02-01 10:24:10 +01:00
11a509970b
some comments
2019-02-01 10:17:20 +01:00
9d25d677e6
using new orientation class
...
not sure if transpose is needed for initialization
2019-02-01 10:11:46 +01:00
53a95ea84f
cleaned and documented
2019-02-01 10:01:54 +01:00
17a682e883
P/epsijk parameter has nothing to do with precision
2019-02-01 08:53:57 +01:00
8a2689da0a
documentation was for a lot of things that are not in here
...
setting constants without truncation
2019-02-01 08:52:38 +01:00
a260bd2d2b
Merge branch 'development' into 10-consistent-orientation-conversions
2019-02-01 07:33:52 +01:00
721af0a9a9
plastic_nonlocal still has confusing state handling
2019-02-01 07:06:19 +01:00
b9c834f86a
missing use from IO
2019-01-31 17:01:26 +01:00
ccb320fa6e
central function for less depencies
2019-01-31 14:00:26 +01:00
a3e61c82dc
Merge branch 'development' into 32_NewStyleNonlocal-3
2019-01-31 12:42:35 +01:00
bcd9908a88
all variables/functions were not used
2019-01-31 12:23:23 +01:00
fbd8912237
Merge branch 'development' into 53-separate-mesh-for-different-solvers-3
2019-01-31 11:41:45 +01:00
6b66563be7
Merge branch '46-simplification-of-crystallite-f90-NEW5' into development
2019-01-31 11:40:23 +01:00
615b166992
removed unused stuff
2019-01-31 11:39:28 +01:00
beb0ca01eb
define functions where needed
...
only use solver specific element names
2019-01-31 11:29:56 +01:00
aabd98bee9
no need to repeat the same code
2019-01-31 09:14:02 +01:00
cbeb3dcff0
use the same formulation for convergence every where
2019-01-31 09:12:44 +01:00
5eaeb37ea4
just polishing
2019-01-31 06:04:49 +01:00
3b13a1af63
calculated convergence criteria wrongly
2019-01-30 17:04:58 +01:00
e1c2747393
logic error for nonlocal
2019-01-30 16:06:14 +01:00
fe88e5bf9c
[skip ci] cleaning
2019-01-30 14:52:12 +01:00
1d88057ce4
avoid superflous variables
2019-01-30 13:24:35 +01:00
64b89484d2
logic better visible
2019-01-30 13:19:05 +01:00
39e766bba0
improved readability
2019-01-30 12:36:02 +01:00
3dd21177a0
no need to store relative residual pointwise
2019-01-30 11:28:41 +01:00
fd069a96cd
unifying name
2019-01-30 10:51:24 +01:00
4ec0fd70a2
only one variable needed
2019-01-30 10:48:59 +01:00
0876787e3c
avoid loops
2019-01-30 10:46:53 +01:00
72c4f2b25f
same names everywhere if possible
2019-01-30 10:37:18 +01:00
0745d7ebc2
convergence flag is set only later
2019-01-30 10:33:57 +01:00
46be595ea8
no need to store relative residual for all points
2019-01-30 10:28:47 +01:00
31906e3ebd
no need for 2 loops
2019-01-30 09:21:50 +01:00
df6ec59f76
use "s" for source
2019-01-30 09:21:50 +01:00
ca7c105f36
only one loop needed
2019-01-30 09:21:50 +01:00
462b1b7c18
sorted according to importance
2019-01-30 06:47:36 +01:00
5908e3fd34
wrong tolerance selection
2019-01-30 06:44:26 +01:00
370b23d5da
Merge branch '46-simplification-of-crystallite-f90-NEW5' into development
2019-01-30 06:29:41 +01:00
77f1f45c23
just figured out that RK4 integrator is totally broken
...
readable code helps ;)
2019-01-30 00:17:04 +01:00
a09036ff48
on-the-fly initialization
2019-01-30 00:11:10 +01:00
1a66f976b7
common variable name
2019-01-30 00:01:40 +01:00
6a3dac1df2
still improving readability
2019-01-29 23:45:41 +01:00
bdd193fbd7
now readable (kind of)
2019-01-29 23:31:26 +01:00
eade54a68f
consistent variable names
2019-01-29 23:04:50 +01:00
1408d66c0c
s is used for source
2019-01-29 23:02:59 +01:00
Martin Diehl