8b06d97e84
Merge remote-tracking branch 'origin/T_ref300' into dynamic-C
2021-11-25 11:18:25 +01:00
e941867290
single source of truth
2021-11-25 06:23:26 +01:00
bc30248b95
0K is not a good reference
2021-11-25 06:12:55 +01:00
35f20811cb
thermal dependent C
2021-11-24 23:21:31 +01:00
da23c916ca
polish
2021-11-21 15:49:04 -05:00
28ff027b38
exploit symmetry for stress calculation
2021-11-20 22:36:01 +01:00
a857285e34
backward transformation for Voigt
2021-11-20 22:09:01 +01:00
f6440f7f17
need to check 'any', adjusted tolerance
2021-11-20 15:18:48 +01:00
87100d1dce
avoid conversion Voigt-6x6 to 3x3x3x3
2021-11-20 15:15:59 +01:00
a6c311f410
commented
2021-11-20 12:16:32 +01:00
021d614daf
using Voigt notation
...
This is a bugfix with a change of behavior
2021-11-19 20:44:30 +01:00
ff9fa1d4f7
using Voigt notation instead of proprietary scaled 6x6 notation
...
Note: This results in a change of behavior for the transformation
systems of dislotwin. I assume that this fixes a bug, but still need to
confirm where the equations in lattice_C66_trans come from
2021-11-19 07:33:59 +01:00
fa8218124a
avoid conversions
2021-11-18 22:02:19 +01:00
038dd1fc40
correct names
...
whether C66 is homogenized or not is a decision of the caller
2021-11-18 21:31:08 +01:00
dfe6d0a195
more support for Voigt notation
2021-11-18 21:06:38 +01:00
020ef64d7d
explicit conversions
2021-11-18 19:37:48 +01:00
8a8fdfc93c
use Voigt notation
...
there is no advantage of using the symmetrized conversions
2021-11-18 17:33:08 +01:00
4d29393ced
simplified
2021-11-18 16:59:23 +01:00
f7a42bdc1a
avoid conversion to 3333
2021-11-18 16:56:36 +01:00
8d64a1c2f2
mark compressed notation
2021-11-18 16:37:34 +01:00
72c07cfc17
'present' propagates
2021-11-18 16:33:21 +01:00
29771feaae
cleaning
2021-11-18 14:43:05 +01:00
eee455c0d3
polishing
2021-11-18 13:12:14 +01:00
0badba032b
Merge remote-tracking branch 'origin/development' into dynamic-C
2021-11-18 10:29:33 +01:00
55d6b1dd1a
preparing for temperature dependent C by calling it dynamically
2021-11-17 21:35:39 +01:00
262ff03b9f
more consistent formatting of loops
2021-11-17 09:11:30 +01:00
4ebf14317a
Merge branch 'development' into pretty-print-init
2021-11-16 12:56:38 -05:00
58410709b9
Merge branch '136-skip-plasticity-calculations-for-purely-elastic' into 'development'
...
reduce computation effort for plasticity==none
Closes #136
See merge request damask/DAMASK!452
2021-11-16 16:28:25 +00:00
43ae4983ed
fixed misaligned/too short "writing..." statements
2021-11-15 12:58:59 -05:00
69843d0833
Merge branch 'development' into pretty-print-init
2021-11-15 12:39:14 -05:00
da9fdf53d2
consistent indentation and line-spacings in reporting
2021-11-15 12:35:44 -05:00
64d70d9be3
user option to have no output
...
f_out = none
2021-11-15 14:39:29 +01:00
f7dbda31e8
style adjustments
...
- two empty lines after variables
- enddo, endif should have space
2021-11-14 06:46:01 +01:00
2408b74cac
reduce computation effort for plasticity==none
2021-11-14 06:45:37 +01:00
aa6efd21cd
Merge remote-tracking branch 'origin/development' into initial-eigenstrain
2021-11-12 08:46:50 +01:00
8138d3a180
style adjustments
2021-11-11 23:59:48 +01:00
ba31ff7263
do not rely on ML per default
2021-11-11 23:23:14 +01:00
b7ad5b3167
'standard' style
2021-11-10 20:53:20 +01:00
186b688b04
only look for opening part of <CellData> tag
2021-11-09 15:10:19 -05:00
0514ca7a56
Merge remote-tracking branch 'origin/development' into initial-eigenstrain
2021-11-08 18:49:41 +01:00
a041551b9f
Merge remote-tracking branch 'origin/development' into mesh-order
2021-11-03 07:57:59 +01:00
f4f0163d5e
Merge remote-tracking branch 'origin/development' into initial-eigenstrain
2021-11-02 13:22:47 +01:00
e0b6a28b48
better matching name
2021-10-31 22:13:36 +01:00
737eff9179
bugfix: change of behavior
...
v_0 was erroneously introduced
use tau = (tau_pos+tau_neg)/2
2021-10-31 18:59:51 +01:00
6d117882c5
use precalculated value
2021-10-31 17:29:35 +01:00
fbc4865c30
mathematically equivalent re-formulation
...
allows to disable contribution from grain size by setting it to a large
value
2021-10-31 15:42:18 +01:00
f5fe0b9dca
bugfix: change of behavior
...
negative values for the resolved stress do not make sense.
The paper does not take this into account (eq (14), Cereceda et. al
2016). According to my understanding, only the non-thermal contributions should be
substracted, so abs(tau_pos)/abs(tau_neg) would not be sufficient.
2021-10-31 09:53:58 +01:00
e20b705f54
following dislotwin
2021-10-30 23:02:51 +02:00
bff186051c
simplified
2021-10-30 22:54:02 +02:00
bb757cf82e
style adjustments
2021-10-30 13:15:03 +02:00
f0a33b452f
unifying style
2021-10-28 07:05:14 +02:00
b4ff89f304
improved test
2021-10-27 22:54:26 +02:00
a00c6743c3
symbolic notation in numerics.yaml
...
- p_i: integration order
- p_s: shape function order
ensure working combination (p_s = p_i: full integration, p_s = p_i+1:
reduced integration)
2021-10-26 11:51:08 +02:00
fc42665838
Merge branch 'modern-complex-components' into 'development'
...
better readable
See merge request damask/DAMASK!444
2021-10-22 10:48:40 +00:00
256c48831e
better readable
2021-10-19 23:08:21 +02:00
2e340d3489
forgotten rename
2021-10-15 22:19:58 +02:00
519bb857d7
save list of files used for compilation
...
helpful for debugging and creating automated documentation
2021-10-15 22:15:08 +02:00
c628c028dc
SYNTAXONLY for mesh, avoid code duplication
2021-10-15 22:14:37 +02:00
dd7549a381
seems to work without further changes
2021-10-06 07:50:42 +02:00
29431eb8c5
same reporting as in python
2021-09-12 21:55:14 +02:00
949eea1624
bugfix: did not work with VTK 8
2021-09-01 11:07:39 +02:00
566e0445fc
old url is not working anymore
2021-08-25 08:18:46 +02:00
129ff28692
Merge remote-tracking branch 'origin/master' into misc-improvements
2021-08-24 16:04:32 +02:00
9061297e6e
typo
2021-08-19 19:57:52 +02:00
caf9a29b73
useful information, especially in logs from bug reports
2021-08-19 07:10:00 +02:00
411f35272a
offset should have been taken into account (like earlier)
...
new changes should not break old functionality
2021-08-19 06:10:44 +02:00
49ccbf3eb8
still not perfect:
...
https://stackoverflow.com/questions/32411963
2021-08-18 22:20:30 +02:00
93d23fa6bb
Merge remote-tracking branch 'origin/development' into YAML-bug-fix
2021-08-17 18:57:14 +02:00
a1fd45bded
offset should have been taken into account (like earlier)
...
new changes should not break old functionality
2021-08-17 17:46:22 +02:00
4160c4fdb4
fix for parallel HDF5
...
if filters are applied, writing from one process does not work if the
file is opened for parallel write
2021-08-15 13:26:15 +02:00
497bf2c645
avoid errors for empty datasets
...
empty dataset cannot be chunked, but filters can only be applied to
chunked datasets
2021-08-14 20:44:59 +02:00
1963343cd8
avoid issues with empty files
...
optional files (numerics.yaml, debug.yaml) can be empty
2021-08-14 20:01:25 +02:00
30d9f57db0
also compress string datasets
...
results in different type (numpy string instead of numpy object), tests need to be adjusted
2021-08-14 16:28:51 +02:00
595cc4e59e
always chunk data
...
for small datasets:
- only one chunk
- no compression
2021-08-14 15:48:07 +02:00
01d5458611
correct line continuation
2021-08-11 14:32:21 +02:00
c2e86a2b2a
lessons learned from compilation with Intel 2021.3
2021-08-10 23:47:13 +02:00
b29b0ecd71
Merge branch 'development' into report-systems
2021-08-10 09:16:13 +02:00
f75235f6a9
Merge branch 'more-flexible-L' into 'development'
...
more flexibility for the L in the load case
See merge request damask/DAMASK!420
2021-08-09 21:27:13 +00:00
cf66b81e3a
avoid code duplication
2021-08-07 22:02:44 +02:00
5b4b1c1933
enforce correct shape
2021-08-05 20:32:58 +02:00
00a053c4c8
Merge remote-tracking branch 'origin/development' into initial-eigenstrain
2021-08-05 16:25:27 +02:00
2635bb012c
Merge remote-tracking branch 'origin/development' into YAML-improvements
2021-08-05 14:49:33 +02:00
68eb930bf0
Merge remote-tracking branch 'origin/development' into report-systems
2021-08-03 21:57:50 +02:00
4a8c836117
Merge branch 'store-sim-setup' into 'development'
...
store information on slip and twin systems
See merge request damask/DAMASK!422
2021-08-03 13:16:59 +00:00
100215edb6
Merge remote-tracking branch 'origin/development' into YAML-improvements
2021-08-02 16:57:07 +02:00
c5a80bc75d
more readable
2021-08-02 16:50:21 +02:00
e8312a49ed
polishing
2021-08-02 10:38:59 +02:00
044a048944
taking care of corner cases (e.g. restart)
...
adjusting tests to take care of new 'setup' group
2021-08-01 22:46:11 +02:00
e97757bd25
Merge remote-tracking branch 'origin/development' into report-systems
2021-07-30 15:49:42 +02:00
e89a03d456
Suggestion by @Franz
2021-07-28 18:04:52 +02:00
578ee2b214
Merge remote-tracking branch 'origin/development' into YAML-improvements
2021-07-28 12:15:09 +02:00
3d7f15c940
meaningful error message incase of mismatch in quotes
2021-07-28 12:14:00 +02:00
5d0c0f4283
outdated instructions
2021-07-27 16:44:52 +02:00
af714cfd5b
broken Intel compiler (do concurrent)
...
errors occur under unclear conditions, better avoid at the moment:
https://community.intel.com/t5/Intel-Fortran-Compiler/do-concurrent-broken-with-openmp/m-p/1301528#M156942
https://community.intel.com/t5/Intel-Fortran-Compiler/Bug-with-do-concurrent-and-openmp/m-p/1173473m
2021-07-27 16:44:13 +02:00
07fb7f8fdf
save information on slip systems for reproducibility
2021-07-27 15:39:21 +02:00
a6f7e4f1a6
play it safe
2021-07-27 10:18:55 +02:00
64d52dbbf4
store input deck, MSC.Marc now 100% reproducible
2021-07-27 09:46:51 +02:00
26ae352a4c
make setup data easily accessible to the user
2021-07-27 09:38:47 +02:00
b9d4eb23cc
only rank 0 reads file for MPI
2021-07-27 08:54:17 +02:00
812b0f07f5
read file only once (per process)
2021-07-27 08:35:52 +02:00
367c088b16
sorting according to dependency (no Makefile)
2021-07-27 08:00:24 +02:00
ddb0429a1d
store load case (full reproducibility for grid solver)
2021-07-27 07:57:04 +02:00
e01d271ee4
store geometry (for full reproducibility)
2021-07-27 07:43:35 +02:00
3b06498c2f
make results self-contained for reproducibility
...
ToDo: same functionality for load and geom
2021-07-27 07:40:55 +02:00
f20302e0ee
early initialization of results
...
need to be done before config if config writes to it
2021-07-27 07:27:18 +02:00
820d590b6b
write string to result
...
requires to open file without MPI support
2021-07-27 07:25:44 +02:00
58c1f5fdc1
write string, only from one MPI process
...
needed to store simulation setup. I don't see a situation where strings
are distributed over multiple processes
2021-07-27 07:23:02 +02:00
a891fe4281
keep it simple
2021-07-26 22:59:53 +02:00
558a643120
microstructure is now dependentState
2021-07-26 22:56:40 +02:00
b5dade2f70
Report slip system definition to result file
2021-07-26 22:49:19 +02:00
855186eb83
Merge remote-tracking branch 'origin/development' into report-systems
2021-07-26 20:29:23 +02:00
c7ed0e7934
Merge remote-tracking branch 'origin/development' into do-concurrent
2021-07-26 20:20:52 +02:00
012f09caa7
Merge branch 'plastic-name-behavior-fix' into 'development'
...
adjusted names and behavior of dislo(tungsten + twin) + kinehardening
See merge request damask/DAMASK!419
2021-07-26 14:51:20 +00:00
ac6d31b1f9
Merge branch 'polishing' into 'development'
...
Polishing
See merge request damask/DAMASK!418
2021-07-26 13:09:49 +00:00
f1f658bbd2
Merge remote-tracking branch 'origin/development' into plastic-name-behavior-fix
2021-07-26 15:07:53 +02:00
6a9c892d7b
Merge branch 'write_ipdisplacements' into 'development'
...
Write ip displacements
See merge request damask/DAMASK!414
2021-07-26 09:01:04 +00:00
e56f2e09a4
trivial and never used
...
even the more commoly used fucntions for 3x3 matrices are not all in use
2021-07-26 10:22:53 +02:00
d19ab4c4f6
co concurrent possible here
...
note: do concurrent cannot be used for the double loops for 66 to 3333!
2021-07-25 14:37:50 +02:00
61a3b33e71
output info about used slip/twin systems
2021-07-25 14:11:07 +02:00
31a4000655
no need for arbitrary dimension
...
not sure if correct, not used at all (even identity4th for 3 dim is not
used, but now at least tested)
2021-07-25 13:32:11 +02:00
3bb5ae3d9e
concurrent/parallel execution is possible here
2021-07-25 13:20:39 +02:00
d2b5a4b339
pointer voodoo for ifort
2021-07-25 10:30:44 +02:00
18b3424975
handle twin and slip systems
2021-07-25 10:12:01 +02:00
c388ab97c9
trying to make sense of HDF5 pointer magic
2021-07-25 09:43:52 +02:00
d9ef1ef5e4
write variable length string (as other, best compatibility with h5py)
2021-07-25 09:36:56 +02:00
26e1e979f5
length is known
2021-07-24 23:08:05 +02:00
71e17ba917
WIP: report active slip systems to DADF5
...
needs further work, currently an array of fixed length strings is
written while all single strings are of variable length type
2021-07-24 22:51:57 +02:00
a98ae267a0
option to initialize F_i
...
start simulation with eigenstrain. Works only for moderate
eigentstrains, reaching the plastic limit is most likely an issue.
2021-07-24 18:47:45 +02:00
b3f5e12232
using burgers vector of tw/tr system seems to make more sense here
...
otherwise twinning will not work in many cases.
Matching number is only required for nucleation of tw/tr
2021-07-24 18:37:25 +02:00
ae49920256
support single and double quotes in key value pairs also
...
escape characters not supported in double quotes
2021-07-24 17:40:27 +02:00
59d09d708e
string array support for attributes
2021-07-24 17:18:31 +02:00
eef7b8f0a9
nothing to select anymore
2021-07-24 15:16:30 +02:00
d87b10bfe7
symbolic names
2021-07-24 15:03:26 +02:00
db07ee2113
supported by recent compilers
2021-07-24 14:35:17 +02:00
f22f30e05d
same functionality as for 1D
2021-07-24 14:27:00 +02:00
d6ce721a25
need to check type of leaf
...
otherwise, using a [list] where a scalar is expected results in a crash,
not in a meaningful error message
2021-07-24 12:10:59 +02:00
931dc99557
not used
...
climb formulation was updated a while ago
2021-07-24 11:21:07 +02:00
d4ffc778c2
easier to read
...
removed comment regarding use of dot_state in kinetics_t(w/r). Data stored
in dotState is not reliable, FPI integrator for writes to it and Runge-Kutta
calls the dot state function at different time steps
2021-07-24 07:11:31 +02:00
527fd306e2
change of behavior
...
- gamma (state) increases monotoneously
- region of spontaneous annihilation is ignored in dipole formation
2021-07-23 22:25:06 +02:00
2a78174547
standard names in source code
2021-07-23 22:17:00 +02:00
c46813657f
better to understand
2021-07-23 21:56:34 +02:00
f96b0371ac
proper output name/format
2021-07-23 21:48:40 +02:00
6936ecb091
sl is the subscript for slip
2021-07-23 21:36:26 +02:00
a5c4e7232c
probably not needed
...
We remove blank spaces while converting to flow YAML.
2021-07-23 18:37:45 +02:00
c347688410
Merge remote-tracking branch 'origin/development' into YAML-improvements
2021-07-23 17:55:03 +02:00
ca8775e0d4
allow " " in YAML, follow yamllint.
2021-07-23 17:45:10 +02:00
d216e77ca6
default values for p/q are dangerous
2021-07-23 09:07:39 +02:00
2cc8612572
consistent variable names
2021-07-23 07:16:08 +02:00
f6378790f1
following python
...
we might want to rename the whole module from 'lattice' to 'crystal'
2021-07-23 06:46:17 +02:00
f5af352644
whitespace adjustments
2021-07-23 00:09:51 +02:00
d682b477dd
following paper
2021-07-22 23:22:45 +02:00
85fd2e3fad
not needed
2021-07-22 23:15:20 +02:00
3f7043de74
standard name
2021-07-22 23:15:20 +02:00
7e27baacfe
missing conversion
2021-07-22 21:39:05 +02:00
bd9cae11a5
allow multi line scalar list items.
...
If a scalar list item has ',', the parser would consider it as a separator and not a part of the string
For the moment, this scalar item is enclosed with double quotes ""
In the next step, the flow parser should be able to use this quotes as an indicator for strings
2021-07-22 15:51:33 +02:00
a03aa97970
default name
2021-07-22 15:41:09 +02:00
4fab078d18
multinomial tested+simplified
2021-07-22 15:31:30 +02:00
d9aa638ad7
shorter
2021-07-22 15:11:38 +02:00
5ac592eb9e
initialize L_(i/p), L_(i,p)0
2021-07-22 12:31:10 +02:00
69cc0b528b
do calculation for initialization
2021-07-22 11:38:03 +02:00
aa03e59306
same statement, different syntax but silences gfortran runtime warning
...
with automated LHS, compiling in DEBUG mode (tested for mesh solver)
gives:
home/m/DAMASK/src/phase_mechanical.f90:1010:43: runtime error: signed integer overflow:
-9223372036854775808 - 1 cannot be represented in type 'integer(kind=8)'
2021-07-22 11:24:10 +02:00
5b66db8a39
only mechanics at the moment
...
will be extended, but most likely differently
2021-07-22 10:12:43 +02:00
eb834b635d
unify notation with grid
...
consistent style: Symbols, not descriptions.
also removed untested/unused loginc functionality. Once load cases are
written in YAML, we can introduce the scaling as in DAMASK_grid
2021-07-22 08:48:44 +02:00
173a5f8e55
less public/unneeded variables
2021-07-22 07:48:01 +02:00
574cfd7034
Merge remote-tracking branch 'origin/development' into more-flexible-L
2021-07-22 00:20:33 +02:00
de7ef43095
documenting/silencing gfortran
2021-07-21 23:49:24 +02:00
aace5d25a8
initialization needed
2021-07-21 23:19:41 +02:00
58a7921966
no need for temp, pack instead of reshape for 1D array
2021-07-21 22:45:04 +02:00
b817c620a3
let the computer count
2021-07-21 21:25:33 +02:00
23077fd58c
testing coordinates
...
I don't understand why this pattern exists (with w(2) = 3, w(3) = 2),
but it exists
2021-07-21 19:42:53 +02:00
5a04a1d661
let the computer do the counting
2021-07-21 19:41:14 +02:00
c56979e2ad
single source of truth
2021-07-21 18:47:19 +02:00
000007ba59
better test automatically
2021-07-21 18:06:37 +02:00
b1ba64e6af
understanding floating point precision
...
double can use 16 or 17 significant figures
- if the leading number is high (above 5 or so), only 16 figures are
significant.
- a trailing 1 is never significant
2021-07-21 18:04:50 +02:00
76572e4ca9
standard notation
2021-07-21 16:34:33 +02:00
e3e9dfdc60
following paper
2021-07-21 16:29:57 +02:00
8feeda6f05
phase_mechanical_elastic should store data related to elasticity
2021-07-21 16:23:21 +02:00
fc5237fa80
using central values
2021-07-21 15:46:38 +02:00
8259cb3cdc
notation as in paper
2021-07-21 15:03:28 +02:00
b2e94974ca
short names
2021-07-21 14:52:37 +02:00
f25dee4c3a
quad points updated and rounded based on literature values
2021-07-21 14:34:18 +02:00
df1fe39dc2
Merge remote-tracking branch 'origin/development' into write_ipdisplacements
2021-07-21 13:30:12 +02:00
9d349f8a7c
symbolic notation
2021-07-21 06:50:28 +02:00
b5bf1d525e
Merge remote-tracking branch 'origin/development' into more-flexible-L
2021-07-21 06:36:05 +02:00
6f19113072
L, P, F, etc. are second order tensors
2021-07-21 06:19:04 +02:00
b98819a36c
adjusting names
2021-07-20 18:29:21 +02:00
a919ac0aea
Merge branch 'write_ipdisplacements' of git.damask.mpie.de:damask/DAMASK into write_ipdisplacements
2021-07-20 15:35:48 +02:00
86d918367f
Round quadrature points
2021-07-20 15:34:13 +02:00
85735605f8
more flexibility for the L in the load case
...
Note that mixed boundary conditions for L introduce an ambiguity.
Consider:
L = [[1.0, x, x],
[ 0, 0, 0],
[ 0, 0, 0]]
P = [[x, 0, 0],
[x, x, x],
[x, x, x]]
What we need is F^(n+1)=F_dot^(n+1) x Delta_t, where F_dot^(n+1) is
F_dot^(n+1)_ij = L_ik F^n_kj.
So component F_11 has contributions from L_12 and L_13. We first assume
L_12=L_13=0 and then choose F^(n+1)_12 and F^(n+1)_13 to get
P_12=P_13=0. This implicitly gives a solution for L_12 and L_13, which
is however only one out of infinitely many.
2021-07-20 07:10:28 +02:00
03b7532cc5
numpy.MaskedArray behavior
2021-07-19 23:27:10 +02:00
1c1dc9383e
symbolic names
2021-07-19 22:30:20 +02:00
4a2e62fdb2
Merge branch 'development' into 'write_ipdisplacements'
...
# Conflicts:
# src/mesh/mesh_mech_FEM.f90
2021-07-19 17:19:40 +00:00
a654cd4fb1
To avoid fortran double variable truncation for quadrature points
2021-07-19 17:07:43 +02:00
97203ff551
document and keep definitions together
2021-07-18 23:30:30 +02:00
53b7aab29d
use ph,en access pattern
2021-07-18 09:48:49 +02:00
6ad6158bfb
(en)try is the name used in the DADF5 file
2021-07-18 09:44:52 +02:00
57ad308a7f
readable
2021-07-18 09:22:12 +02:00
d068f45aa0
avoid superflouos damage calculations
2021-07-17 15:25:00 +02:00
c109d5a37b
better have different physics separated
2021-07-17 14:06:48 +02:00
f9edeb40a5
descriptive names
2021-07-17 11:50:21 +02:00
e6d25294d3
separating functionality
2021-07-16 23:32:08 +02:00
fc735d6391
substate0 only needed for staggered state-stress integration
2021-07-16 23:19:48 +02:00
777620b800
polishing
2021-07-16 22:41:38 +02:00
594ad2c310
semi-separate handling of damage
2021-07-16 22:22:41 +02:00
2b24224c7e
more meaningful name
2021-07-16 20:52:41 +02:00
ed6b1be352
solver handles terminally ill
2021-07-16 20:43:08 +02:00
2a84aa7ae4
obvious, no need for comment
2021-07-16 20:32:21 +02:00
5f78f1753c
split up thermal
...
only for grid at the moment
2021-07-16 18:03:38 +02:00
3f0eafd640
first step towards separating of mechanics, thermal, and damage
2021-07-16 17:53:11 +02:00
013c4c0a92
common variable names
2021-07-16 10:31:40 +02:00
2f1fa8292b
unify style to majority of occurences
2021-07-16 10:30:45 +02:00
3830492791
Merge remote-tracking branch 'origin/development' into write_ipdisplacements
2021-07-15 17:34:44 +02:00
4d6a9a51ed
correct logic
2021-07-15 17:32:41 +02:00
94843becda
writing ip displacements (algorithm contain bugs)
2021-07-14 19:33:54 +02:00
766db0524f
Merge remote-tracking branch 'origin/Marc-start-material-at-0' into marc2021.2
2021-07-14 18:06:57 +02:00
05b319fbfb
easier to read
2021-07-14 06:33:04 +02:00
2ffa6cac70
Merge remote-tracking branch 'origin/development' into Marc-start-material-at-0
2021-07-14 06:15:46 +02:00
ce3b4d2a2a
Merge branch 'development' into YAML-fixes
2021-07-13 20:27:21 +02:00
45abca90c5
stricter
...
example of invalid YAML--> mechanical:{type: pass}
2021-07-12 22:17:02 +02:00
d2560ebb39
function should return either 'true' or 'false' and not bear the responsibility to throw errors
...
We were forcing every colon to indicate either key or key: value
2021-07-12 21:42:51 +02:00
df9a94422f
0-based indexing in MSC.Marc
...
inline with Python library and grid, still need to decide on mesh (neper
is 1-based)
2021-07-10 09:49:29 +02:00
136a4b1377
PETSc defines are rather complicated
...
now mpi_f08 can be used on newer PETSc installations if old MPI modules
are not exposed
2021-07-09 18:48:25 +02:00
637f78bd52
old name (for PETSc < 3.15)
2021-07-09 14:50:29 +02:00
3870a70a4e
HDF5 seems to use MPI (F90 style)
2021-07-09 12:37:39 +02:00
8e75e87ad9
Merge branch 'MPI_F08' into polishing-for-beta
2021-07-09 11:32:32 +02:00
c3e94cf1fe
Marc2021.2 is out!
2021-07-09 08:59:04 +02:00
f54bd8f3a9
correct capitalization
2021-07-08 17:56:49 +02:00
139f2c177a
use MPI_f08 if possible
...
most PETSc installations provide outdated MPI (f90 version)
MPI_COMM_WORLD is now of derived type (Fortran 08 style)
PETSC_COMM_WORLD is the plain integer (f90 style) alias.
Note that HDF5 is assumed to have f90 interfaces
2021-07-08 16:27:37 +02:00
4c3ff4bef4
consistent capitalization
2021-07-08 15:05:01 +02:00
58bc6e2ba6
avoid chained inclusions
2021-07-08 14:27:04 +02:00
69415d2e05
not needed
2021-07-08 12:30:00 +02:00
3c6c5d77e8
following paper
2021-07-06 22:58:18 +02:00
a13e02da44
easier to follow
2021-07-06 22:33:12 +02:00
cd9d704aae
bug fixes:
...
invalid material.yaml, detect such errors in future
2021-07-05 11:30:52 +02:00
f0a75d8d62
consistent capitalization
...
Capitals for pre processor macros to avoid clashes
2021-07-04 17:43:19 +02:00
6dc70fa4e7
not used anywhere
...
was only required for ductile damage
2021-07-04 08:51:53 +02:00
7daef03e65
new multiphyics notation
2021-07-03 22:50:14 +02:00
8acecc1306
preparing standard multiphysics notation
2021-07-03 22:41:34 +02:00
f69f61dcb7
avoid duplication
2021-07-03 22:30:06 +02:00
a0ffbc5f17
little polishing
...
- same names as for grid
- 'local' naming misleading here (probably for x_local etc also not a
good choice)
- following names in PETSc notation (https://www.mcs.anl.gov/petsc/petsc-current/docs/manualpages/DMPLEX/DMPlexGetPointLocal.html )
- using allocation with bounds to simplify access
- NOTE: The nodal coordinates are not what damask.Result expects except
for simple, 1 IP elements!
2021-07-02 23:49:06 +02:00
1516ded71b
Merge remote-tracking branch 'origin/development' into write_displacements
2021-07-02 23:07:51 +02:00
7745640393
consistently use prefix as modifier
2021-06-28 23:41:50 +02:00
f2a359bea1
relaxing tolerances
...
allowed for simplified cases (no temperature dependency/friction)
2021-06-28 23:28:41 +02:00
5973ef5b13
Merge remote-tracking branch 'origin/nonlocal-examples' into preparing-alpha4
2021-06-28 23:22:16 +02:00
6651656903
isoductile is not working
2021-06-28 23:13:56 +02:00
b1f4c06f9c
takeover from Christophs thesis
2021-06-26 13:25:13 +02:00
b322ed3e03
feauture to write nodal displacements to hdf5 file added
2021-06-25 20:46:21 +02:00
ab0e65c6bc
systematic names and sensible defaults
2021-06-25 15:12:54 +02:00
06e76c1a81
consistent default absolute tolerances
...
better use conservative values, users can easily relax if needed
2021-06-25 10:13:03 +02:00
a9f5dcfbf1
avoid allocate based on random value in sum_N_sl
2021-06-24 23:35:14 +02:00
106fec92d7
C is the common symbol
2021-06-24 19:14:19 +02:00
8f5a370388
bugfix: update compatibility for nonlocal
...
intent(out) resulted in setting nonlocal = .false.
now using plasticState%nonlocal consistently
2021-06-24 18:59:52 +02:00
f42157c076
consistent names
2021-06-24 16:31:07 +02:00
f834a1534e
simplified
2021-06-24 16:07:54 +02:00
12ca7428cf
cleaning
2021-06-24 15:25:43 +02:00
ae9a48c124
polishing
2021-06-24 15:23:24 +02:00
b4265149c8
simplified
2021-06-24 15:08:31 +02:00
95c9434a21
bugfix: enable local simulations
2021-06-24 15:01:32 +02:00
8c06e7a4ff
generic and extendable multiphysics notation
2021-06-24 14:49:09 +02:00
c49ba5419b
sign-transfer done right
2021-06-21 23:26:17 +02:00
4b82cb4c14
extra parameter needed
...
Hardening parameters determine rate of hardening in phenopowerlaw.
This flexibility is also needed in J2.
2021-06-21 23:22:51 +02:00
27431bd60c
avoid division by M gives better agreement with phenopowerlaw
2021-06-21 23:11:09 +02:00
ea4867770f
avoid error due to limited floating point accurary
2021-06-21 16:15:40 +02:00
38e4802867
3.15.1 works (3.15.0 has a bug)
2021-06-21 06:53:17 +02:00
0a22916aba
not a double subscript
2021-06-19 15:13:27 +02:00
8bba021fe1
Merge remote-tracking branch 'origin/development' into mesh_test
2021-06-18 19:23:20 +02:00
36bf68b336
Out of plane coordinates for 2D elements are updated with dummy values
2021-06-17 20:26:37 +02:00
b9d4217d86
permutationStar111 for 4th order integration is updataed
2021-06-16 14:58:26 +02:00
1bfbd30ae2
polishing
2021-06-15 19:53:05 +02:00
218e6a79a8
VTK image data is the appropriate type, not VTK rectilinear grid
...
FFTs require constant spacing in all three directions, this is
guaranteed by the vtkImageData but not by vtkRectilinearGrid
2021-06-15 19:02:26 +02:00
e10701b32a
easier to understand
2021-06-14 15:21:10 +02:00
5f01b076d2
This change makes the test work for GNU too
...
Probably something was uninitialized and GNU was accessing unallocated memory
2021-06-14 14:58:14 +02:00
c64f9eb805
hardcoding '3' is an issue for 2d simulations
2021-06-11 20:42:31 +02:00
3705f1d3a2
F,P, ... in loadcase are 2nd order tensors
2021-06-03 08:21:16 +02:00
6cd0d79c61
old merge not reflected
2021-06-02 14:08:12 +02:00
39c2506b8d
Merge branch 'Fortran-cleaning' into 'development'
...
Separating functionality
See merge request damask/DAMASK!396
2021-06-02 09:24:47 +00:00
fada9a7f6c
more meaningful order
2021-06-01 17:05:13 +02:00
5d0fc4fca3
more meaningful order
...
and intent(out) variables for read are at the front
2021-06-01 16:46:24 +02:00
569b1fc563
not needed (duplicated code)
2021-06-01 11:09:02 +02:00
6f9e521cdb
Merge branch 'HDFgeometryupdate' into 'development'
...
HDF geometry update
See merge request damask/DAMASK!395
2021-06-01 08:01:53 +00:00
431416b5ba
Separating functionality
...
lattice should become a module with static data and functions
2021-06-01 07:56:55 +02:00
91015fd07c
write out undeformed configuration
2021-05-31 19:41:22 +02:00
650fbd7509
Initial nodal and ip coordinates added to the HDF5 output file
2021-05-31 15:01:42 +02:00
718880f177
Initial nodal and ip coordinates added to the HDF5 output file
2021-05-31 14:09:11 +02:00
d1a6607782
Merge branch 'load2Dtensor' into 'development'
...
support for 2D tensor in load case
See merge request damask/DAMASK!391
2021-05-29 13:21:47 +00:00
77a0d5999b
not needed
2021-05-28 19:24:38 +02:00
4669c289c7
Merge remote-tracking branch 'origin/development' into Fortran-cleaning
2021-05-28 15:00:06 +02:00
0240bec5b3
consistent reporting
2021-05-27 08:25:48 +02:00
bdb4029fb5
tI symmetry of 2nd order tensor is equivalent to hP
2021-05-26 22:49:53 +02:00
16128c257a
Merge branch 'development' into fix-thermalexpansion
2021-05-26 22:49:39 +02:00
95f7f3c6ed
Merge remote-tracking branch 'origin/development' into simplify-cmake
2021-05-26 19:11:20 +02:00
adb1e51e24
support for 2D tensor in load case
...
currently optional, but should become mandatory after a transition
period
2021-05-26 08:04:14 +02:00
019159d328
WIP
2021-05-26 06:31:11 +02:00
24e862105c
ensuring correct lattice symmetries
2021-05-25 06:05:51 +02:00
299c47fd6f
prepare for varying C66
...
- check structure centrally
- pure function with guaranteed return/no stop
2021-05-24 20:33:50 +02:00
f525999f52
updated tests
2021-05-24 20:12:34 +02:00
f44edb31fc
polishing
2021-05-24 17:20:33 +02:00
fe281f4592
only Hooke as model
...
and this model should take care of the elastic constants, not lattice
2021-05-24 17:19:38 +02:00
0d0bc188eb
potentially less error prone (and easier to read)
2021-05-24 17:17:27 +02:00
40698740aa
fixed symmetry handling
...
- ort not tested, no examples, no documentation => removed
- aP is the opposite of isotropic => removed
isostropic materials can be easily specified as cI or cF, using C_44 =
1/2 * (C_11 - C_12). Acceptable extra effort for special use case
orthorhombic can be easily implemented if needed, but needs test,
documentation, and examples
2021-05-24 15:45:25 +02:00
ab070a3c13
data for thermal expansion
2021-05-24 10:31:56 +02:00
b0f4ea45a4
Merge branch 'simplify-cmake' into fix-thermalexpansion
2021-05-23 22:07:58 +02:00
4d889e0b1b
Merge remote-tracking branch 'origin/development' into Fortran-cleaning
2021-05-23 21:24:53 +02:00
78799f9794
fix for openMP
2021-05-23 18:44:24 +02:00
7afb1d28cc
easier to read
2021-05-23 15:04:55 +02:00
4713e0e85d
new names and mappings
2021-05-23 13:14:57 +02:00
62c9761a05
Merge remote-tracking branch 'origin/development' into simplify-cmake
2021-05-23 12:31:42 +02:00
c4d1969150
easier to read
...
and faster for multiphase materials
2021-05-23 09:15:03 +02:00
8dcf4354e1
more logical structure
2021-05-23 08:19:43 +02:00
72ab936ec3
cleaning
2021-05-23 00:12:55 +02:00
af9fa9e9a1
using current naming scheme
2021-05-23 00:04:12 +02:00
ee80efd705
using new mappings
2021-05-22 22:52:05 +02:00
0b80252d97
Merge remote-tracking branch 'origin/123_bccSlipSystem' into development
2021-05-22 22:40:33 +02:00
d41f3a5490
consistent data structure
2021-05-22 21:53:39 +02:00
6d31f77deb
natural data structure
2021-05-22 17:54:42 +02:00
212c4296cf
need to loop over ip, el
2021-05-22 16:45:49 +02:00
cc9a0e4865
Merge branch 'development' into fix-Intel2021
2021-05-22 14:51:25 +02:00
fc4bdfb374
simplified
2021-05-22 12:03:13 +02:00
d2855913b5
new mappings
2021-05-22 11:48:42 +02:00
7440cc32a0
Merge branch 'internal-restructure' into 'development'
...
Internal restructure
See merge request damask/DAMASK!384
2021-05-22 09:38:33 +00:00
77d1ed465e
divide and test
2021-05-22 11:09:50 +02:00
00fcf069fb
clearer names and reporting
2021-05-22 09:33:58 +02:00
37d511062d
simplified (using new mapping)
2021-05-22 09:33:33 +02:00
e79c17ecbc
Merge branch 'fix_typo_dislotungsten' into 'development'
...
fixed typo
See merge request damask/DAMASK!385
2021-05-21 20:29:21 +00:00
801e9f512b
simplified state initialization
...
- not needed for damage (is an intial value problem, will trickle down)
- plastic initializes state, copy to state0 (centrally)
2021-05-21 22:07:55 +02:00
2aa78a710b
correct capitalization
2021-05-21 22:05:09 +02:00
47e69019b6
matching name
2021-05-21 21:53:37 +02:00
fa3b077b72
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-05-21 12:32:59 +02:00
3ee22cfc59
circumvent bug in Intel compiler 2021.2
...
explicit "result" looks anyways better
thanks to Jonathan from University of Alabama for reporting
2021-05-21 07:15:46 +02:00
10c6070873
added {123} slips systems of bcc
2021-05-20 18:45:15 +02:00
798a0ef73f
fixed typo
2021-05-20 11:58:42 -04:00
125e8fb9e2
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-05-20 10:41:59 +02:00
106f687e97
not needed
2021-05-19 22:43:21 +02:00
c24d41ac4d
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-05-19 22:26:38 +02:00
67352d9ec7
location depends on PETSC_ARCH (if set)
2021-05-19 19:22:06 +02:00
49d51e196c
no hope for GPI
...
flang will hopefully work in the near future
2021-05-19 13:42:14 +02:00
2648464525
relax tolerances for quaternion initialization
...
we read in ASCII/YAML files, 1e-8 must be enough
2021-05-19 09:46:02 +02:00
9a37b6ddbe
support windows line endings
...
if first line ends with CRLF, convert all CR to ' ' (trailing spaces
will cause no harm)
2021-05-19 09:08:41 +02:00
e3506576e7
isobrittle handles stiffness degradation implicitly
2021-05-10 14:37:09 +02:00
053c427509
adjusting to new interaction matrices
2021-05-09 14:50:55 +02:00
c9c8631e7b
including documentation from damask.mpie.de
2021-05-09 10:58:43 +02:00
693c2f4e3f
Merge remote-tracking branch 'origin/development' into MatrixInteraction_clean
2021-05-09 08:04:15 +02:00
43db3bd8d3
Merge branch 'improved-thermal-solver-options' into 'development'
...
better numerical parameters for thermal solver/PETSc
See merge request damask/DAMASK!379
2021-05-07 14:16:22 +00:00
7774ca7211
Merge remote-tracking branch 'origin/internal-restructure' into development
2021-05-07 12:42:12 +02:00
8277d88799
new interaction matrix for bcc from Madec2017
2021-05-07 10:42:47 +02:00
cc855be822
new interaction matrix for FCC, 1,2,3,4 are unchanged, 5 can now be 5 or 6, old 6-12 are add +1 and now are 7-13
2021-05-07 10:32:31 +02:00
d64ad82ce0
use negative numbers to have unique names for the {112} slip system in BCC
2021-05-07 10:24:04 +02:00
1eb1e54f78
adjustment to new structure/names was missing
...
reason: test missing/not good
2021-05-06 08:47:30 +02:00
c8cdd7e622
better numerical parameters for thermal solver/PETSc
...
works for realistic values for thermal problems
parameters copied from spectral_damage
2021-05-05 18:14:53 +02:00
b353f8ed92
workaround for HDF5: https://forum.hdfgroup.org/t/6186
...
writing chunked/compressed data can cause problems with MPI. Even though not 100%
clear from the reference, it seems that the issue only appears for HDF5
< 1.12.
Of special importance for Ubuntu since the Debian package is still at 1.10.6
2021-05-03 18:19:06 +02:00
6c92e8d2cc
belongs to elastic submodule
2021-04-29 16:16:51 +02:00
e795e72df7
new names
2021-04-29 14:24:19 +02:00
7e9133621a
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-04-28 23:24:02 +02:00
e9cfb2f968
Merge branch 'drop-old-DADF5-support' into 'development'
...
Improvements to damask.Result
See merge request damask/DAMASK!373
2021-04-27 00:33:41 +00:00
55333f7e3e
Merge branch 'no-shell-variables' into 'development'
...
KISS: no shell variables
See merge request damask/DAMASK!370
2021-04-26 15:48:58 +00:00
478665b7cd
polishing
2021-04-26 15:10:45 +02:00
62c987badf
add tracer to vtk files
2021-04-25 23:54:33 +02:00
d0b86f54fb
consistent with new naming scheme
2021-04-25 08:16:26 +02:00
74dd9bf589
use sensible defaults if shell NUM_THREADS is not given
2021-04-22 08:04:02 +02:00
d83c746a17
polishing
2021-04-15 12:07:33 +02:00
34dc4fda13
needs rework
2021-04-14 19:58:58 +02:00
285889b48e
merge evaluates both expression, can lead to division by zero
2021-04-13 23:23:39 +02:00
1762245b69
merge not needed
2021-04-13 19:26:35 +02:00
248bc539cc
new mappings
2021-04-13 12:40:58 +02:00
74548d5f51
new names (as in HDF5 out)
2021-04-12 21:29:04 +02:00
887524bcc1
polishing
2021-04-11 16:09:29 +02:00
f655a6fe5c
store data locally
2021-04-11 14:30:10 +02:00
b2292986f4
distributing responsibilities
2021-04-11 13:42:50 +02:00
8ec2d3a9ce
bugfix: mixed up order
2021-04-11 12:49:28 +02:00
9d90ed525e
YAML structure allows more than one mechanism
2021-04-11 12:42:57 +02:00
081d51f224
multiple damage mechanisms currently not supported
2021-04-11 12:37:46 +02:00
071c1a5ad4
avoid repetition
2021-04-11 12:18:26 +02:00
8b7f777186
probably not needed
2021-04-11 11:17:52 +02:00
b67e837548
needs broadcast, otherwise rank>0 fail
2021-04-11 09:58:40 +02:00
547f2ffa69
cleaning
2021-04-11 09:46:11 +02:00
b55e721ec4
standard name
2021-04-11 09:25:45 +02:00
34bb4c65a9
distributing responsibility
2021-04-11 08:58:40 +02:00
4b89e2f40c
sorted and documented
2021-04-11 08:32:13 +02:00
a386b82f74
distributing responsibility
2021-04-11 08:14:39 +02:00
d488f1708a
consistent naming
2021-04-11 07:41:59 +02:00
97d426718a
following renames and access pattern
2021-04-10 21:16:57 +02:00
690777ac88
base access on cell numbers
...
DAMASK does not care about elem, IP, etc..
2021-04-10 21:16:10 +02:00
4d9949547c
more systematic name
2021-04-10 21:04:33 +02:00
80dd16ed55
Merge branch 'development' into Fortran-cleaning
2021-04-10 14:18:09 +02:00
73b07eda4a
Merge branch 'Results.read-.place' into 'development'
...
simplified handling of Result class
See merge request damask/DAMASK!363
2021-04-09 22:47:05 +00:00
5f608ed572
only 2 and 3 dimension can be 1
2021-04-09 08:25:30 +02:00
1b89032086
names as in DAMASK paper
2021-04-08 23:45:26 +02:00
c4765d3742
following paper
2021-04-08 13:31:21 +02:00
d59051f576
systematic names
2021-04-07 22:42:10 +02:00
0fc7f66ef8
consistent names
2021-04-07 21:25:11 +02:00
c4b4ea8c21
avoid invalid access in case of no damage
2021-04-07 20:52:25 +02:00
bbb292d093
polishing
2021-04-07 20:39:29 +02:00
1851b66cb4
use new data container
2021-04-07 14:56:11 +02:00
c4942e3f82
part of damage init
2021-04-07 13:22:22 +02:00
16f7af4c27
consistent interface
2021-04-07 13:02:42 +02:00
5eb44969cc
no need to do this globally
2021-04-07 11:48:04 +02:00
cdae867beb
simplified
...
damage currently works only for single constituent
2021-04-07 09:11:40 +02:00
c53927ad6f
not needed
2021-04-07 08:47:46 +02:00
1fbf14c148
encapsulation and namespace-like names
2021-04-07 07:53:24 +02:00
cb6b7a5fb9
standardized names
2021-04-07 07:26:54 +02:00
5a361c12f8
bugfix: corrected name
2021-04-06 15:53:06 +02:00
c80774f3d2
Merge branch 'development' into Fortran-cleaning
2021-04-06 15:40:51 +02:00
0d974648f0
part of damage, not of eigen
2021-04-06 12:18:48 +02:00
d56f1acf36
shorter names
...
need to prefix 'pass' to avoid name clashes that result in errors during
compilation
2021-04-06 12:05:47 +02:00
49804c6e44
preparing split
2021-04-06 11:55:30 +02:00
330803881b
variable 'damage' is not occupied anymore
2021-04-06 11:41:45 +02:00
869976c7a0
new names
2021-04-06 11:38:44 +02:00
39f4efa55a
Merge branch 'cleaning' into 'development'
...
Superfluous F_e calculation
See merge request damask/DAMASK!361
2021-04-06 08:35:51 +00:00
2b798589ce
modularizing
2021-04-06 10:22:47 +02:00
b797d9d76b
not needed
2021-04-06 10:14:52 +02:00
65b03aeb2d
Merge remote-tracking branch 'origin/development' into Results.read-.place
2021-04-05 10:22:49 +02:00
2bfed863ba
line was to long
...
macro was changed in PETSc 3.15
2021-04-05 09:04:44 +02:00
445e934102
Merge branch 'development' into spring-cleaning
2021-04-03 23:28:59 +02:00
857a990a0e
avoid long lines
2021-04-03 20:39:07 +02:00
09beb8f38c
white space adjustments
2021-04-03 18:00:41 +02:00
8ac4850dd3
more consistent error messages
2021-03-31 10:55:25 -04:00
7e8f630a62
consistent
2021-03-29 21:44:37 +02:00
c8e48090a2
Merge remote-tracking branch 'origin/development' into YAML-error-message
2021-03-29 21:38:35 +02:00
295c036644
not required (checking)
2021-03-29 20:10:57 +02:00
aa5cd76d33
function not needed
2021-03-29 13:47:23 +02:00
2e96fcf768
Merge branch 'development' into spring-cleaning
2021-03-29 07:26:17 +02:00
5bf4553882
following naming of interaction coefficients
2021-03-29 07:25:55 +02:00
b44864355d
no need for subscript, following dislotwin
2021-03-29 07:20:06 +02:00
e6143f6eec
source not needed here
...
I don't think 'shape' is possible without full inspection of the stored
data structure
2021-03-29 06:40:33 +02:00
710f5b74b2
Merge remote-tracking branch 'origin/development' into 2d-table-yaml
2021-03-29 00:00:39 +02:00
ecf5639360
Merge remote-tracking branch 'origin/development' into YAML-error-message
2021-03-28 21:59:08 +02:00
84e383964b
polishing/fixing tests
2021-03-27 23:58:49 +01:00
0072ebfa64
polishing
2021-03-27 23:17:04 +01:00
20c9549198
polishing
...
thread sanitizer throws warnings, probably because off 'terminallyIll'
2021-03-27 18:00:13 +01:00
7072ab0984
non-converging simulation is an error
2021-03-27 17:07:36 +01:00
7c96d49b08
remove extra lines
2021-03-27 13:44:29 +01:00
f909aee835
Merge remote-tracking branch 'origin/output-rename' into internal-restructure
2021-03-27 13:40:15 +01:00
4d046e4e16
no plastic model as default
2021-03-27 06:06:27 +01:00
ac310ee760
elastic constants with source
2021-03-26 20:12:30 +01:00
3b6c97edb0
adjusting names
2021-03-26 17:39:21 +01:00
949c37c4d0
bugfix
...
incorrect handling of NonSchmid behavior
2021-03-26 13:51:09 +01:00
d74c1534ed
bug fixes
2021-03-26 12:48:20 +01:00
cb0d407ce4
not used
2021-03-26 12:40:01 +01:00
6a2c107723
consistent names for debugging
2021-03-26 12:34:16 +01:00
51ae66f573
Marc improvements
...
- fix for 2020
- drop support for versions using old compiler
- consistent capitalization
2021-03-26 11:40:24 +01:00
3e8bcd3225
cleaning examples, using consistent names
...
- examples in repository should only show the most basic steps
- MSC.Marc, marc => Marc
2021-03-26 09:27:49 +01:00
4cc0dedf9f
Merge branch 'avoid_data_copy_restart_MPI' into spring-cleaning
2021-03-26 08:58:44 +01:00
7320120c5d
Merge branch 'development' into avoid_data_copy_restart_MPI
2021-03-26 08:58:03 +01:00
35c854b549
guide the user
2021-03-26 06:45:39 +01:00
8b2281af98
missing reference polishing
2021-03-25 21:03:46 +01:00
a72e2db678
Merge branch 'development' into output-rename
2021-03-25 21:03:20 +01:00
3b392281e4
consistent naming in HDF5 output
2021-03-25 19:22:59 +01:00
b1cca4f5bd
polishing
2021-03-24 15:50:39 +01:00
95fe007369
Merge remote-tracking branch 'origin/development' into citation-style
2021-03-19 10:42:49 +01:00
fc172921fb
unified citation style continued
2021-03-19 10:41:47 +01:00
cec6589b26
polishing
2021-03-18 17:43:20 +01:00
9896a01ea4
easier to read
2021-03-18 08:07:10 +01:00
b174473373
no need to duplicated check
2021-03-18 08:03:56 +01:00
52a0f0aaa9
hickup
2021-03-18 08:02:12 +01:00
07d79ef4ba
unifying style
2021-03-17 11:25:21 +01:00
0e18f31e31
Merge branch 'development' into avoid_data_copy_restart_MPI
2021-03-17 10:46:50 +01:00
ef792a578b
separate elastic submodule
2021-03-16 20:35:29 +01:00
b67724e3f0
Merge branch 'development' into fix_homogenization_restart
2021-03-15 12:46:38 +01:00
4912342b1b
added missing arguments
2021-03-15 11:46:30 +01:00
a59af55f1a
read data by one process and broadcast it
2021-03-15 10:58:59 +01:00
ce91537b0f
get_asXXs --> get_as1dXX
2021-03-11 18:40:16 +01:00
158afac5b9
Merge remote-tracking branch 'origin/development' into 2d-table-yaml
2021-03-11 16:56:27 +01:00
f3558f19b6
standardizing
...
1) don't start with capital letters
2) mechanics -> mechanical, plasticity -> plastic, elasticity -> plastic
3) store results per top level group (no plasticity, only mechanics)
2021-03-10 22:38:29 +01:00
adcb24d2e1
write data of average quantities non parallel
2021-03-10 16:33:02 +01:00
0a2810230e
Merge commit 'fd24c9c2a193972ea17e94ba848d87d2aeb43028' into YAML-error-message
...
changes made by @p.eisenlohr in another branch
2021-03-08 20:58:30 +01:00
15517c4d4f
default name
...
and output of optional physics only if active
2021-03-07 23:52:40 +01:00
6a191a7338
avoid repetition
2021-03-07 23:34:06 +01:00
fb8f12ad70
standard names, no initial capitals
2021-03-07 22:59:06 +01:00
5cd68dbddb
fixed stray homogenization_Nmembers --> _Nconstituents
2021-03-04 15:36:36 -05:00
a7e2ed40dd
rename Nconstituents --> Nmembers
2021-03-04 15:16:36 -05:00
e1f0d2e0a3
polishing of indentation and whitespaces; thermal_homogenize only once after all constituents
2021-03-04 15:15:40 -05:00
e4271537c5
syntax polishing; use of YAML defaults to avoid if%contains
2021-03-04 15:14:16 -05:00
438167804c
if( polishing
2021-03-04 15:11:39 -05:00
5d51da11e5
trying new structure to have better yaml error messages
2021-03-04 20:06:32 +01:00
357fd81be4
read in 2d float arrays in yaml
...
test added too
2021-03-04 19:08:41 +01:00
f3a2c49b39
read in 2d arrays in yaml
2021-03-01 19:03:50 +01:00
4cd72b36ad
Merge remote-tracking branch 'origin/development' into initial-temp
2021-03-01 06:16:50 +01:00
2f68c43755
new style configuration for damage
2021-03-01 06:16:16 +01:00
8af0c8dbc3
using initial temperature from load case file
2021-02-28 21:51:07 +01:00
0cde43198f
modernizing:
...
- 'pass' for dummy thermal homogenization
- setting temperature in load case
2021-02-28 20:49:51 +01:00
7b89cb41f9
Merge branch 'dislotwin-correction' into 'development'
...
dislotwin-correction
See merge request damask/DAMASK!347
2021-02-28 19:45:34 +00:00
ae57ba9707
got random errors 'O not found'
...
might be related to use of pointers in openMP. Not nice, but openMP
during initialization is not really required
2021-02-28 20:10:12 +01:00
ef543a5b49
thermal solver is defined in load case
...
not in numerics.yaml
2021-02-28 20:09:08 +01:00
b2fea6b149
solver not specific to load case number
2021-02-28 19:24:44 +01:00
4dd99d4c39
solver is selected in load case, not numerics.yaml
2021-02-28 19:13:20 +01:00
c483dc609f
common name
2021-02-28 11:47:27 +01:00
fd24c9c2a1
simplified tNode_get_byKey_asIndex and tNode_getKey_byIndex==>get_byIndex_asKey; syntax polishing
2021-02-27 13:22:46 -05:00
c0620037a1
simplified tNode_get_byKey_asIndex and tNode_getKey_byIndex; syntax polishing
2021-02-27 13:14:53 -05:00
d92393ab70
avoid accessing uninitialized data
2021-02-27 10:11:43 +01:00
657d43308f
standardized names
2021-02-27 10:04:08 +01:00
4edf8e1c6c
better yaml error description for type mismatch
2021-02-26 22:33:22 +01:00
8b9b0e30b1
read in correct values
2021-02-26 07:09:04 +01:00
2ca3a824a4
better fail immediately
2021-02-25 23:11:36 +01:00
be0e393e1d
cleaning homogenization
2021-02-25 21:55:15 +01:00
988e584d7d
merge simplifies conditional assignment
2021-02-25 16:44:52 +01:00
59b7565961
multiple clips throws NAN, back to sequential way of clipping
2021-02-25 15:46:59 +01:00
0d0aaa0df6
Merge branch 'development' into fix_homogenization_restart
2021-02-25 09:50:38 +01:00
f8bc2bf0c2
renamed "no_dipole_formation" flag to "omit_dipoles"; shortened dipole dotState logic
2021-02-24 14:25:05 -05:00
7d90404e17
we read state0 after restart
2021-02-24 18:13:48 +01:00
9a9d287aed
tau_0 should be per slip family
2021-02-24 13:18:42 +01:00
9679c5403e
continue with cell based map (solver + homog)
2021-02-23 15:44:58 +01:00
d8112cc2e1
storing by instance just complicates the code
2021-02-23 13:45:06 +01:00
89858543fa
more cleaning; use 'ce', 'ph', 'me' wherever applicable
...
hide ip,el
2021-02-23 11:47:29 +01:00
286f59ed8c
fix for OpenMP
2021-02-23 10:47:04 +01:00
e929da24e8
consistent naming
2021-02-23 10:30:40 +01:00
8d57252a54
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-02-23 09:03:57 +01:00
e249168189
modifying storing of orientations;
...
needed for nonlocal, and also to remove the use if ip,el at homogenization level.
ip, el should be used only for looping eventually.
2021-02-22 20:38:49 +01:00
2f9d891fdd
instance less; use cell mapping
2021-02-22 16:17:32 +01:00
5348305ac8
restart key part of loadstep and not time discretization
2021-02-22 14:42:54 +01:00
4d5e5cfb70
Merge branch 'fix-IntelMPI' into 'development'
...
Bugfix for access of unallocated variable
See merge request damask/DAMASK!342
2021-02-22 12:40:37 +00:00
d54e49e3bc
restore functionality to write non-parallel
...
not needed at the moment, but in general useful. If PETSc = parallel
should always hold, we can simplify much more
2021-02-22 13:37:21 +01:00
68d8aecb2b
Merge branch 'development' into fix_homogenization_restart
2021-02-22 10:41:01 +01:00
db25bc947d
Merge remote-tracking branch 'origin/development' into internal-restructure
2021-02-19 15:19:42 +01:00
6c7201610e
Bugfix for access of unallocated variable
...
IntelMPI seems to access sendbuf for root!=0 in MPI_Scatterv
2021-02-17 17:56:39 +01:00
53bab41b47
consistent name 'ph' and cleaning
2021-02-16 16:06:09 +01:00
9f78e27724
use cell mapping
2021-02-15 18:43:51 +01:00
341e8ddd6a
storing per instance does not add any value
2021-02-14 18:34:48 +01:00
f46d212e47
simplified access pattern
2021-02-14 17:35:39 +01:00
4026881e5a
clean interface
...
still need to get rid of internal converstion to instance and el,ip
arguments
2021-02-14 15:29:10 +01:00
5a1ca012f8
more suitable data structure
...
no need to know (ip,el) at the constitutive level
2021-02-14 14:36:56 +01:00
18971d7d8b
separation by instance does not add any value
2021-02-14 10:26:33 +01:00
c09c2a6c8e
easier to read without instance
2021-02-14 00:50:42 +01:00
5126370934
cleavageopening+anisobrittle are strongly coupled
2021-02-13 19:20:52 +01:00
9481b16878
missing renames
2021-02-13 19:10:13 +01:00
8dc53344ec
'kinematics'=>'eigen', now part of 'mechanics'
2021-02-13 18:52:37 +01:00
22a0aff488
separting thermal and damage sources
2021-02-13 18:41:30 +01:00
72c099dbbe
store data separetly
2021-02-13 15:06:27 +01:00
595ee7a35a
copy and paste error
2021-02-13 14:38:53 +01:00
b3231bf0a8
avoid undefined return
2021-02-13 14:15:41 +01:00
ab202b8e73
less verbose reporting
2021-02-13 13:07:35 +01:00
570086c814
hard code at max 1 damage mechanism
2021-02-13 13:07:12 +01:00
d9699b0f2e
simplified access pattern
2021-02-13 11:01:08 +01:00
775a51faa1
explicit instance mapping not needed
2021-02-13 10:11:39 +01:00
b3dde6d722
only one damage mechanism per phase
...
material.yaml specification is designed to allow more than one, but that
requires to have two phase fields etc.
For the moment, keep it as simple as possible.
2021-02-13 09:55:17 +01:00
6e3515982d
not needed outside of thermal
2021-02-13 07:55:32 +01:00
f95e3bc08d
simplified access pattern
2021-02-13 07:25:48 +01:00
c790c82a42
separating by instance just complicates things
2021-02-13 06:59:18 +01:00
2b0b1aeffe
jobname.yaml not supported anymore
2021-02-13 06:31:06 +01:00
830d00fa67
simplified structure
...
choice of damage model triggers eigendeformation, no repeated variables
This implementation is the most ugly hack I could imagine. I just serves
the purpose of having a stable material.yaml
2021-02-12 22:46:26 +01:00
4eb2a981ca
keeping variables local
2021-02-12 15:31:43 +01:00
a09989fe0b
homogenized damage only needed in homogenization
2021-02-12 12:35:50 +01:00
7bec3e0363
use partitioned damage
2021-02-12 11:24:04 +01:00
462ca1a30b
not needed
2021-02-12 08:10:25 +01:00
f6be3fe0b7
no need for pointer
2021-02-12 07:58:00 +01:00
4515920b69
not needed
2021-02-11 23:54:43 +01:00
958936c449
Merge branch 'development' into polishing-for-release
2021-02-11 21:59:59 +01:00
e855083964
systematic names
2021-02-11 14:19:04 +01:00
ef45e856a1
don't scan the whole file in case of proper line endings
...
might lead to strange behavior if people randomly distribute CRs in
their file. But that actually deserves to get strange behavior
+ Test
2021-02-10 09:08:57 +01:00
5b8e199627
avoid errors related to CRLF (windows) file endings
2021-02-10 00:02:38 +01:00
8048d69a97
[skip ci] logic inverted
2021-02-05 16:59:28 +01:00
Sharan Roongta