mesh:
elemType identification based on lower case
Abaqus now reports more errors
IO:
new function to inquire whether inputfile contains "parts"
new function to assemble multiply included inputfile into a flat one
awareness of range generation in element numbers
error reporting
started to commend Ricardos code, layoutet loops and removed some redundant variables.
until now, no error calculation is done. at the moment calculations are in an infinite loop
rather perturb all components at once (and optionally decrease the frequency of the Jacobian update with the iJaco parameter) than perturbing only a single component per cycle
restructured nonlocal_dotstate, to be able to easily switch on and off particular effects in the microstructure evolution
nonlocal_dotstate now enforces a cutback when single density runs the risk of becoming negative; in the case of a state already below the relevantState dotState is set to zero
introduced two new output variables: rho_dot_edge and rho_dot_screw
So switched back to the former order of calls which also works for marc2010:
el 1 IP 1 | el 1 IP 2
|
inc mode lovl | inc mode lovl
------------------ | ------------------
0 2 6 | 0 2 6
1 6 4 | 1 6 4
1 4 6 | 1 3 6
1 6 4 | 1 6 4
1 1 6 | 1 2 6
Still to be checked:
according to Franz the lovl order could be different in contact analysis (e.g. starting with lovl 4 instead of 6)
- grainrotation calculation now is done with symmetryID 0, i.e. without symmetry reduction since we want the absolute misorientation.
- While math has everything in radians, post results eulerangles and axisangle are given in degrees.
And: grain rotation seems OK after the previous changes in math module.
beware that crystallite output "orientation" now by default returns the orientation as quaternion. if you want euler angles instead, you have to add "eulerangles" as a crystallite output in your material.config file (see material.config template).
for input of orientations in the texture block of the material.config you still have to specify the rotation in terms of euler angles, quaternions are not yet supported for input.
- nonlocal stiffness calculation: we perturb all material points at the same time, so instead of N^2 loops we just need N
- set "forceLocalStiffnessCalculation" to false as standard
- flux density interpolation now depends on the position of the interface between ttwo neighboring material points
- simplified flux calculation scheme
- introduced sanity check for dislocation velocity to ensure v*dt< cellsize
--> new "crystallite" part in config file
--> new "crystallite" option for microstructures
--> new output file "...job.outputCrystallite" to be used in conjunction with marc_addUserOutput for meaningful naming of User Defined Vars.
- reworked contribution of immobile dislocation density for rate equations
- flux is now calculated on the basis of interpolated velocities and densities at the interface; both incoming and outgoing fluxes are considered, so every material point only changes his own dotState
- dislocation velocity is now globally defined and calculated by subroutine constitutive_nonlocal_kinetics; the subroutine is called inside _LpAndItsTangent as well as _microstructure; therefore, microstructure now needs Tstar_v as additional input; in the future one should perhaps create a subroutine constitutive_kinetics that calls constitutive_nonlocal_kinetics separately, to clearly distinguish between microstructural and kinetic variables
- better use flux density vector as output variable instead of scalar flux values for each interface
- added output variables internal and external resolved stress
crystallite:
- added flag to force local stiffness calculation in case of nonlocal model
- misorientation angle is explicitly set to zero when no neighbor can be found
debug:
- added flag "selectiveDebugger" that is used when debugging statements should only affect a specific element, ip and grain; these are specified with the new variables debug_e, debug_i and debug_g
- debugger can now be used in its original sense
- remobilization of immobile singles immediately increases the mobile single dislocation density and therefore directly affects all other mechanisms in dotState
- changed nomenclature (rho -> rhoSgl) to distinguish precisely between single dislocation density and total dislocation density
- changed material.config accordingly
The calculation of the misorientation is now done once in crystallite init and at the end of every FE increment. This saves a lot of time compared to doing it in dotState for every crystallite subinc.
- corrected flux term
- multiplication is now aware of dislocation type
- corrected change rate for "dipole size" dupper
- corrected term for dipole dissociation by stress change
- added transmissivity term in fluxes which accounts for misorientation between two neighboring grains (yet hardcoded transmissivity according to misorientation angle)
- added more output variables
constitutive:
- 2 additional variables "previousDotState" and "previousDotState2", which are used to store the previous and second previous dotState (used in crystallite for acceleration/stabilization of state integration)
- timer for dotState now measures the time for calls to constitutive_ collectState (used to reside in crystallite_updateState, which is not critical in terms of calculation time anymore)
crystallite:
- convergence check for nonlocal elments is now done at end of crystallite loop, not at the beginning; we simple set all elements to not converged if there is at least one nonlocal element that did not converge
- need call to microstructure before first call to collect dotState for dependent states
- stiffness calculation (jacobian): if there are nonlocal elements, we also have to consider changes in our neighborhood's states; so for every perturbed component in a single ip, we have to loop over all elements; since this is extremely time-consuming, we just perturb one component per cycle, starting with the one that changes the most during regular time step.
- updateState gets a damping prefactor for our dotState that helps to improve convergence; prefactor is calculated according to change of dotState
IO:
- additional warning message for unknown crystal symmetry
- new subroutine "math_misorientation" which calculates misorientations (based on old subroutine "misorientation", which was not used previously)
- rendered some functions pure
previously was:
if (the_sum /= 1.0_pReal) then (error 170)
this condition is too strict. it may give problem with some numerical truncation error.
now becomes:
if (abs(the_sum - 1.0_pReal) >= 1.0e-10_pReal) then (error 170)
(1) subStepSizeHomog and subStepSizeCryst := size of substep when cut-back is applied (initially was hard-coded).
(2) stepIncreaseHomog and stepIncreaseCryst := step increase when calculation for substep converge (was also hardcoded).
introduced a possibility to choose different finite difference scheme, i.e., forward-, backward- and central-difference, for computing grain numerical tangent. note that central-difference scheme will slow down the computation significantly. please use it only if necessary.
parameters to set these new features have been included in numerics.f90 and numerics.config, whereas corresponding error messages have been introduced in the IO.f90
in constitutive_nonlocal.f90:
Derivatives of shear rates w.r.t. resolved shear stress HAVE to be positive.
Computation of dgdot_dtauslip is now correct.
cleaning up of twin system nomenclature
introduced lookup mechanism to calculate the twinning shears depending on the c/a ratio of the present structure (was [wrongly!!] hardcoded to Titanium)
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
crystallite does not accelerate anymore, since, typically, longer step immediately fails and uses resources in vain. (future: remember number of successful steps to increase step size after x of those...)
# IO has some additional functionality for Abaqus parsing
# ping pong scheme in FE interface now similar (and more human understandable) in both versions
# mesh has better splitting of different tasks, plus operation on database whenever possible
# FEsolver as new global var to indicate FEM solver type
# computation mode reshuffling: 6 is now Marc special case of recycling...
- take orientation gradients into account when calculating dislocation stress and dislocation fluxes
- hard coded value for nu
- changed kinetics (parameter G0 is currently defined as a parameter, needs to be read from material.config)
- added some output statements
constitutive:
- some functions and subroutines needed additional input variables for passing to constitutive_nonlocal
crystallite:
- some functions and subroutines needed additional input variables for passing to constitutive
- call microstructure with current temperature, Fp, Fe, not "sub0" values
- show number of IPs, that are "onTrack" instead of those not "onTrack"
- calculate Fe at beginning of substep, since we need it for state preguess
(state < relevant state) or (residuum < relative tolerance * state)
since the relevant value for the state variables depend on their nature and can vary by large scales (e.g. volume fraction: 1e-10, dislocation density: 1e5) it is not possible to set a unique value. instead the constitutive law has to decide what is relevant. therefore, all constitutive laws now read in parameters from the material.config that determine the values for relevantState [@luc: in dislobased law relevant State is for the moment generally set to 1e-200, so no additional parameters necessary in material.config. if you also want this feature, we can still implement it, no big deal]
- added sanity checks in constitutive_nonlocal.f90
- corrected coordinate transformation for backstress calculation in constitutive_nonlocal.f90
- corrected equations for evolution of dipole dislocation densities (athermal annihilation and formation by glide)
<< correction for a very stupid mistake. replacing stress P with the absolute value of stress abs(P) during convergence check. it should work upon deep-drawing.
homogenization.f90 and crystallite.f90 >>> Correction in the algorithm to count the iteration distribution (for better statistics).
material.config and numerics.config >>> more collection of parameters.
- dipole dislocations with evolution
crystallite.f90:
- collect state uses subdt and subTstar0_v
- in nonlocal modus: set all crystallites to broken if one is not on track anymore after either stress integration or state update
- constitutive_microstructure is now called inside state update and not in integrate_stress anymore
material.config:
- new parameter for nonlocal constitution
CPFEM.f90:
- age Tstar after increment was finished
IO.f90 >>> adding "inRad" instead of using inRad from math.f90 module, since math.f90 module is now below IO.f90.
numerics.f90 >>> now can read the parameter "fixed_seed" from numerics.config. this parameter is used to set a pseudo-random number generator/fixed seeding. default value is 0 (zero), which will give fully random number.
math.f90 >> adding a possibility to fix the seeding (i.e., pseudo random number)
numerics.config >>> add a new parameter: "fixed_seed"
constitutive_phenopowerlaw.f90 >>> adding new parameter: constitutive_phenopowerlaw_w0_slip, i.e., the hardening rate exponent.
homogenization.f90 >>> most important change is to add an if-else statement (line 379-380) to switch crystallite_requeted = .false. for already converged material point iteration (el/ip). the rest of the changes are cosmetics and debugging stuffs.
crystallite.f90 >>> similar to homogenization.f90, the most important change is to add additional if-else statement (line 574) in the jacobian (perturbation) loop. now the jacobian calculation will only be performed when crystallite_requested = .true.. the rest is only cosmetic.
- completed postResults output function
- connecting vector of neighboring material points is mapped to intermediate configuration of my neighbor
crystallite.f90
- zero out dotState only when crystallite is non-finished
- set nonfinished flag to false if crystallite is not on Track after state update
- in updateState: set onTrack flag to false if encounter NaN
- removed some old debugging outputs and added others
homogenization.f90
- in debugging mode now telling when a cutback happens
formerly, if the number of orientations requested was (far) less than the number of nonzero bins in the texture representation, you only got a subset of low phi1 values..! (that is the top corner in Euler space -- Hi Bing ;-) )
debugging memory leak closed
debugging counters corrected
center of gravity stored in mesh
state updated is now split into a collecting loop and an execution
updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged
added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math
non-converged crystallite triggers materialpoint cutback (used to respond elastically)
non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
# non-greedy memory allocation
# generation of outputConstitutive to allow for script-based T16 extraction
# exchange of phenomenological by more general phenopowerlaw
# lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.)
# nicer debugging output
# changed some error/warning codes
# plus potentially some minor additional brushes here and there
The different blocks required for the twinning model are now implemented (I guess correctly...)
Keywords in the material.config are changed. Since the flow rule for twin systems remains under investigation, this part is susceptible to further changes.
Philip Eisenlohr