Commit Graph

726 Commits

Author SHA1 Message Date
Denny Tjahjanto d114a600c3 fixed some errors in QuaternionToEuler, RToQuaternion to get the correct texture representation in the output. 2010-05-26 15:52:54 +00:00
Christoph Kords e5f0af638e fixed calculation of dislocation stress for elements with a single ip and no neighbors; used to get segmentation fault 2010-05-26 09:17:10 +00:00
Christoph Kords 0c5bc83469 in nonlocal_microstructure: at the model surface the excess density is now extrapolated from opposite neighbor instead of assuming zero density; this results in better modeling of the dislocation stress at the surface
restructured nonlocal_dotstate, to be able to easily switch on and off particular effects in the microstructure evolution
nonlocal_dotstate now enforces a cutback when single density runs the risk of becoming negative; in the case of a state already below the relevantState dotState is set to zero
introduced two new output variables: rho_dot_edge and rho_dot_screw
2010-05-21 08:51:15 +00:00
Christoph Kords dba4ae7ef1 new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context.
"defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 14:55:11 +00:00
Christoph Kords 3a23dc4bbd first call to hypela2 in inc 0 is done with computation mode 2 (=plain calc), but since rev. 539 the second call was done with computation mode 6 (=only return values) instead of 2. This doesnt work, because computation mode 2 might calculate stress and tangent for all materialpoints, but the mapping from lattice to current configuration is only done for the element/IP that triggers the call.
So switched back to the former order of calls which also works for marc2010:

el 1 IP 1		|	el 1 IP 2
			|
inc mode lovl	|	inc mode lovl
------------------	|	------------------
0       2       6	|	0	2	6
1       6	4	|	1	6	4
1	4	6	|	1	3	6
1	6	4	|	1	6	4
1	1	6	|	1	2	6

Still to be checked:
according to Franz the lovl order could be different in contact analysis (e.g. starting with lovl 4 instead of 6)
2010-05-20 09:14:59 +00:00
Christoph Kords 51da3b6242 sorry, in rev 568 some variables were not declared in crystallite_postResults 2010-05-18 12:36:09 +00:00
Christoph Kords 472684c30e make element type 8 (= hex8 reduced integration) available for nonlocal constitutive law 2010-05-18 08:13:23 +00:00
Christoph Kords 19b6fae88b added a missing exclamation mark in front of an $OMP directive 2010-05-18 08:07:55 +00:00
Christoph Kords d96780967b added some output variables in crystallite: F, Fe, Fp, Ee, P, S 2010-05-18 07:57:13 +00:00
Claudio Zambaldi 15328e51cf Like this Euler angles AND grain rotation should be OK. 2010-05-11 15:06:21 +00:00
Franz Roters 483584ceb3 improved version of general I/O functions
renamed module cpfem_interface to mpie_interface
2010-05-11 06:57:15 +00:00
Franz Roters e810e5cfa1 changed fileopen routines in IO.f90 to use solver dependant functions defined in the interface routines
DID NOT test ABAQUS versions yet, not shure whether (V)GETOUTDIR returns path with or without terminating slash
2010-05-10 15:02:59 +00:00
Philip Eisenlohr 0416c9a616 reworked build_ipNeighborhood
added C3D8R reduced integration hexahedral element
2010-05-10 14:54:59 +00:00
Claudio Zambaldi 2405a51042 crystallite:
- grainrotation calculation now is done with symmetryID 0, i.e. without symmetry reduction since we want the absolute misorientation.
- While math has everything in radians, post results eulerangles and axisangle are given in degrees.
And: grain rotation seems OK after the previous changes in math module.
2010-05-07 12:01:46 +00:00
Philip Eisenlohr 97f206d0bc new errors regarding Spectral method input file parsing
mesh setup from Spectral input file
$Id$ in FEsolving activated
2010-05-06 16:40:47 +00:00
Philip Eisenlohr 5a0963fb81 added variable working dir (if apply_script is called from somewhere else) and made the script executable
why using "comp_user?*" instead of "comp_user*" ?? (@Franz...)
2010-05-06 14:17:53 +00:00
Philip Eisenlohr e4067f2d26 debugged zoo of rotation operations and transformations
all angles now in radians

introduced a rudimentary check in math_init to complain (IO_error) about broken transformations (e.g. quat --> R --> quat)
2010-05-06 14:07:21 +00:00
Franz Roters 4954228b3a forgot to change this file accordingly (main.msb revmoved) 2010-05-06 13:19:45 +00:00
Franz Roters f1950cacc9 corrected apply script
removed binary menu file, it is now created by the apply script
2010-05-06 13:17:28 +00:00
Franz Roters f23b4d16d1 updated section with dislotwin paramters 2010-05-06 09:01:54 +00:00
Franz Roters 383a36b226 added comment on reformating to common block files
added modifications necessary for running the subroutine with Marc/Mentat2010
2010-05-06 08:50:54 +00:00
Alankar Alankar 393a67e587 now stating instance when sanity checks run into trouble 2010-05-05 13:36:59 +00:00
Claudio Zambaldi 1ee5df41fd Sorry, that was the wrong file, now the correct one... 2010-05-04 17:34:51 +00:00
Claudio Zambaldi 48c554811b A simple one-element model that you can use to try out changed code before commits. Hopefully, the start of a testing suite. 2010-05-04 17:32:17 +00:00
Christoph Kords 0a36527f61 fixed bugs in math_quaternionDisorientation
though running, there still seem to be some problems with the quaternion functions, since crystallite_grainRotation gives some dubious results!
2010-05-04 16:02:05 +00:00
Philip Eisenlohr ba48e5d3ab fixed syntax errors in last commit -- hopefully no further ones... 2010-05-04 13:03:35 +00:00
Philip Eisenlohr cecffffe2b disorientation with symmetryType == 0 returns plain misorientation
complain about unknown symmetryType
2010-05-04 12:54:13 +00:00
Claudio Zambaldi adaeb0e1ef rotation axis is undefined for small angles and therefore gets a NaN 2010-05-03 18:27:19 +00:00
Philip Eisenlohr 9a257fb68b moved "UserOutput" into figures of Manual 2010-04-29 15:31:40 +00:00
Philip Eisenlohr 2494da8f51 moved Manual to its own folder.
set up include sub-structure.

based on KOMA-script book class and heavily borrowing from Wiley book recently written.
2010-04-29 15:28:29 +00:00
Christoph Kords ea718573ef return 180° disorientation about 100 for neighbors with different phases 2010-04-29 12:28:51 +00:00
Christoph Kords 8ab101da50 safe use of acos function in math_QuaternionToAxisAngle 2010-04-29 10:33:39 +00:00
Philip Eisenlohr 15e5dcf8f2 math_QuaternionToAxisAngle now safe for small or close to 2pi rotations. 2010-04-29 10:01:09 +00:00
Franz Roters e8719cb6b8 Table driven input works wirh 2010!
That leaves DDM to do for tomorrow ;-)
2010-04-29 09:43:31 +00:00
Claudio Zambaldi b7b2b4e9c3 small bug fix. 2010-04-29 09:42:50 +00:00
Claudio Zambaldi 9e2396ffc8 Documentation now with all files 2010-04-29 09:12:20 +00:00
Claudio Zambaldi c744c01ec9 Here is a suggestion for a manual to the CPFEM code. Please remember to add any solved problems to the troubleshooting section... 2010-04-29 09:10:47 +00:00
Franz Roters aaf1bf0edf fixed (first) problem with Marc2010 single job with old style input and extended precision should work now! 2010-04-29 08:15:29 +00:00
Christoph Kords c34c07a6ff statedamper has to be local (specific for each e,i,g); with a global damping we may produce spurious convergence 2010-04-29 07:41:29 +00:00
Christoph Kords 77dc16d15f print aged state of 1 1 1, which always exists, to avoid segmentation fault 2010-04-29 07:34:20 +00:00
Claudio Zambaldi 79f286f24c small typo 2010-04-28 17:45:30 +00:00
Claudio Zambaldi 0b83fa0fb2 corrected (?) disorientation calc and introduced some new assisting functions 2010-04-28 17:19:58 +00:00
Claudio Zambaldi 35cebfb132 extended output string length for init msg 2010-04-28 17:19:06 +00:00
Franz Roters a36951a6ac changed common block files to release version 2010-04-28 07:28:12 +00:00
Claudio Zambaldi e8ab495a6c Introduced new parameter NaN, not a number. It should be assigned for invalid results, such as currently for misorientation of unknown crystal symmetry. 2010-04-19 13:40:22 +00:00
Claudio Zambaldi cab2261693 New array crystallite_symmetryID(i,g,e) is now filled during initialization run with 1 for bcc and fcc phase and 2 for hexagonal phase. The values are needed for misorientation calculations to apply the correct symmetry operators for cubic and hexagonal phases. 2010-04-19 10:03:34 +00:00
Claudio Zambaldi 249042c2d3 New output can be requested from crystallite:
(output) grainrotation
it gives the deviation from the initial grain orientation 
in axis-angle representation with the angle in degrees.
2010-04-12 11:14:36 +00:00
Claudio Zambaldi 653837046e new: math_QuaternionToAxisAngle 2010-04-12 11:07:25 +00:00
Christoph Kords adf6206b71 corrected symmetry operations for hex. 2010-04-12 08:04:26 +00:00
Claudio Zambaldi fc3f35cf3b debugger = .false. 2010-04-08 09:30:25 +00:00