deb2bd7dca
added option to only process ip or node based geometry/data
2013-05-13 10:06:40 +00:00
872f6a9d90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
...
Use keyword "f" for this behavior, don't use it as short name for freq any more!
2013-05-13 09:44:23 +00:00
7f7cd0732d
improved visualization of script results
2013-05-13 09:36:19 +00:00
6fac7c347c
fixed bug in constitutive_nonlocal_kinetics that was introduced in rev2088 along with the non-Schmid behavior: nonSchmid matrix of last slip system was used for all slip systems; led to extremely bad convergence due to flawed dLp_dT
2013-05-10 22:29:12 +00:00
b83b557af2
updated Lib_VTK_IO again. Contains small bug fix ans support for Base64 encoding
2013-05-10 12:57:00 +00:00
d9cc42daef
slight change in flux formulation: no flux to neighbor, not only if there is a sign change in the velocity, but also if the neighboring velocity is exactly zero
2013-05-10 08:42:42 +00:00
193c77f526
corrected prediction of computation time
2013-05-09 11:33:40 +00:00
ed1674ee1c
changed default value of eulerangles label
2013-05-09 11:32:34 +00:00
cfac73043d
some lines in crystallite.f90 exceeded limit of 132 characters
...
fixed bug in Lib_VTK_IO.f90 (informed author as well)
added zip file containing source of Lib_VTK_IO.f90
2013-05-08 17:48:00 +00:00
755e0e2440
vtk files are now correctly written to current working directory.
...
updated Lib_VTK_IO.f90
2013-05-08 16:10:21 +00:00
2d4cb6d128
first point on slice always starts at (0,0)
...
added option to visualize results
2013-05-08 15:59:51 +00:00
bd33169118
mistakenly committed table2ang in rev 2380, instead of vtk2ang. reverted changes in table2ang
2013-05-08 15:58:17 +00:00
85d4a37d95
moved public data res,size and homog from mesh to DAMASK_spectral_utilities (as grid and geomSize)
2013-05-08 15:52:29 +00:00
7ef0ba688a
renaming of reference output file
2013-05-08 12:11:22 +00:00
36988f8d5c
added test of ip neighborhood for spectral solver
2013-05-08 12:05:14 +00:00
3b788720e5
added crystallite output "neighboringelement" and "neighboringip"
...
some polishing in crystallite_postResults
2013-05-08 12:02:30 +00:00
b2a3c9235b
fixed some warnings issued by gfortran (type conversion, not needed use statements)
2013-05-08 09:23:47 +00:00
a345fc2e19
added test for conservation of dislocation line length for all five state integrators
2013-05-07 18:50:50 +00:00
6e64b5c476
better not allow for deads to contribute to flux, since not clear at which interface they got stuck
2013-05-07 18:47:17 +00:00
1c2c9b8436
ip neighborhood was screwed up for spectral solver as of rev 2332 due to new "mesh_spectral_ipNeighborhood": used to have fastest index in z direction although it should be in x direction!
...
also removed output of node twins in "mesh_tell_statistics" when using spectral solver, since not allocated
2013-05-07 17:50:58 +00:00
ed9413a008
added simple output about progress
2013-05-07 14:32:38 +00:00
fb5f94812f
corrected format strings in mesh_read_meshfile and mesh_write_meshfile
2013-05-07 13:27:51 +00:00
543cbf3a14
first point on slice always starts at (0,0)
2013-05-07 13:18:26 +00:00
c7f987a3c1
"unitlength" parameter, which determines the physical size of the mesh, now available as a global mesh variable "mesh_unitlength" and written to the .mesh file during init.
...
Hence, it is available to the marc_deformedGeometry.py script via "mesh_init_postprocessing()" and "mesh_get_unitlength()", so no need for setting the scaling of the displacement vectors explicitly through an option; now displacements and nodal positions are always consistent
2013-05-07 13:06:29 +00:00
9656d06fcc
- all length in nag file in micrometer
...
- "size" option replaced by "scale": uniform scaling of all length
- default normal in negative z-direction
- more output in verbose mode
- ang file numbering starts with 1
- positions in ang file in TSL, not lab frame
2013-05-07 12:57:34 +00:00
278198121d
only import vtk classes that were used
2013-05-06 16:55:44 +00:00
2371bd9f57
correct extension ".py" for "table2ang" and "vtk2ang"
2013-05-06 16:43:05 +00:00
f5482ffbf4
new script that generates ang files for slices through vtk data set
2013-05-06 16:37:54 +00:00
5a8b4515fd
Added report of SUCCESSFUL test for Revision 2373
2013-05-03 00:23:24 +00:00
d2416abdb4
introduced new keyword 'rotation' to specify texture rotation
...
ATTENTION: so far it is read but NOT yet applied!!!
waiting for updated code for orientation assignement
2013-05-02 08:35:37 +00:00
294428e01b
Added report of SUCCESSFUL test for Revision 2371
2013-05-01 00:22:23 +00:00
c436e9747c
Added report of SUCCESSFUL test for Revision 2368
2013-04-30 16:36:46 +00:00
43647fc5e6
use datatype double instead of float for ouputs
2013-04-30 14:45:29 +00:00
c934a6f358
needed make clean when after new configure/make/make install setup
2013-04-30 14:41:30 +00:00
b98ce3d22d
fixed out of range bug introduced with singleRun changes in rev. 2356
2013-04-30 12:14:07 +00:00
2a5dfbbfa0
removed #define Marc and substituted #ifdef Marc by #ifdef Marc4DAMASK which is defined by either the submit scripts or DAMASK_marcXXXX.f90
2013-04-30 09:49:30 +00:00
e912c74da5
added possibility to select "mapping" of multiple grains.
...
'average', 'avg', 'mean' --> result averaged over Ngrains.
'parallel', 'sum' --> result added up from Ngrains.
2013-04-30 09:40:06 +00:00
0d95d33646
use disk shape for twin also in initialization
2013-04-30 07:34:05 +00:00
3f9d642d87
corrected error message when complaining about uncompiled core module
2013-04-29 16:30:08 +00:00
12ca2c1931
added scaling option for displacements
2013-04-29 16:02:30 +00:00
6b7a69fea6
Layout compromise between classic and new Mentat
2013-04-29 14:27:25 +00:00
533fcec96f
named some loops and made BUTCHER TABLEAUs parameters in crystallite_integrateStateRKCK45
2013-04-29 11:17:30 +00:00
9afaa9f4d0
set "line breaks" and "keywords" property
2013-04-29 09:24:07 +00:00
fbb8353bba
check if data set attribute is already present
2013-04-29 09:23:16 +00:00
cc72c0b17b
added two new scripts:
...
"marc_extractData" is a simple variant of the "postResult" script that extracts all data from a macro *.t16 file (quadratic elements not yet supported) and writes it into an asciitable
"addDataToGeometry" searches for corresponding *.txt and *.vtk file in a given directory and adds the data from the *.txt file as SCALARS to the *.vtk file
first script needed an additional function in mesh that returns the corresponding node of a given ip in a specific element
2013-04-28 20:56:17 +00:00
29a6d4f901
new Mentat integration; thre is a DAMASK menu now in jobs/run
...
our installations will be updated one by one, so watch out for the new menu!
2013-04-26 13:43:10 +00:00
9fb6d8167b
simplified logic for single run, now not checking for extra arguments but simply checking if start and end elem/IP are the same
2013-04-26 13:23:36 +00:00
60739abb0d
corrected statistics reporting in case of cutback
2013-04-26 09:13:39 +00:00
c86d9c9faf
corrected typo in filename
2013-04-26 08:29:11 +00:00
44cbde053a
added test for element library of MSC.Marc VTK files look good, stress-strain behavior needs to be examined
2013-04-26 07:58:15 +00:00
Christoph Kords