Commit Graph

843 Commits

Author SHA1 Message Date
Christoph Kords 4a6e08bb69 changed keyword in spectral geometry file for multiplication of entries from "copies of" to "of" 2012-10-18 10:17:16 +00:00
Philip Eisenlohr dd5f453994 mainly cosmetics. added some comments. changed debug levels for some outputs. corrected (probably non-essential) check for NaN in FPI stressIntegrator. 2012-10-18 09:53:26 +00:00
Philip Eisenlohr 79a5a30a90 removed now obsolete vectorproduct variables st, tt... 2012-10-18 07:25:49 +00:00
Christoph Kords 5f0440fde3 crystallite_integrateStress now raises an error if Fp becomes NaN 2012-10-17 16:19:42 +00:00
Philip Eisenlohr 31f20e51da just to be able to tell about the bug I found in the hex slip systems---which I actually forgot to mention during the last commit---I slipped in a syntax error that now is fixed, too... 2012-10-12 20:31:50 +00:00
Philip Eisenlohr 05c5ea42d7 prepared loop distributions to hold "over shooters" 2012-10-12 18:00:55 +00:00
Philip Eisenlohr 82a13af474 tidied up the Schmid matrix calculations.
added internal check against dilatation in Schmid matrices.
2012-10-12 17:59:50 +00:00
Philip Eisenlohr b20c612e25 added error "0" for internal (run time) checks failing 2012-10-12 17:55:23 +00:00
Philip Eisenlohr 1b2edd7e7d fixed error in _identity (wrong delta-function)
added _exp33 for matrix exponential
added trace33 for matrix trace
2012-10-12 17:54:20 +00:00
Martin Diehl 324dfda5a2 added comments (doxygen conform) to phenopowerlaw, added warning on specifying h0_sliptwin as it has no effect 2012-10-11 14:49:12 +00:00
Christoph Kords e4054c116d fixed problem with gnu compiler: allocation of variables in constitutive_nonlocal_stateInit was not safe when not using any nonlocal constitution
put header of debugging output in constitutive_init at the start of the function in order to make debugging easier
2012-10-09 12:34:57 +00:00
Christoph Kords a84e0529c3 make correction of hardening coefficients thread safe 2012-10-05 16:05:51 +00:00
Christoph Kords 40a2e652e7 introduced material parameter "linetension", which indicates how strong the effect of the line tension on the hardening coefficients is 2012-10-05 14:42:41 +00:00
Christoph Kords 7cc6108a04 hardening coefficients for fcc are density dependent (line tension effect, Devincre, Kubin, Hoc; 2006; Physical analyses of crystal plasticity by DD simulations)
fixed bug with thermal annihilation producing negative density in case of very small dipole density and high climb velocity
2012-10-04 18:08:40 +00:00
Martin Diehl 80465c0b49 moved option for UTF-8 encoding to spectral interface as this is now called before prec init.
if UTF-8 encoding is needed for FEM solver (old compilers might not support it), add the same statement to the corresponding interface routine
2012-10-04 14:22:39 +00:00
Martin Diehl e2ea3cdff6 again some changes regarding creation of NaN, ieee-conforming way is not in the complilers yet. 2012-10-02 16:53:03 +00:00
Christoph Kords bce8012c89 random distribution of initial dislocation density now really independent of meshsize 2012-10-02 15:26:58 +00:00
Martin Diehl d5ce49c471 numerics got some protected statements and is now reading in the new keywords for the solver selection in small letters.
spectral solver got cut back facilities + improved output to screen
2012-10-02 15:26:56 +00:00
Christoph Kords 91b7883c2a random distribution of initial dislocation density now independent of mesh size 2012-10-02 13:35:34 +00:00
Christoph Kords 1502a71f0c added possibility to start with an initial random distribution of dislocation segments with specific overall density 2012-10-02 12:57:24 +00:00
Martin Diehl 0bcb8f59db added doxygen comments, some polishing, added "protected" statements where applicable 2012-10-02 12:53:25 +00:00
Martin Diehl 6301787df4 moved the the variable cutBack from FEsolving.f90 (where it was not used at all) to the interface routines to make responsibility of cut back control clear
PLEASE RUN setup_code.py IF YOU DO MARC SIMULATIONS, THE INTERFACE HAS CHANGED
2012-10-02 12:46:58 +00:00
Martin Diehl c8b7da432c set debug_level to be protected as it is read-only for other modules 2012-10-02 09:35:39 +00:00
Martin Diehl 4c7bcb8df9 modified formated integer output and added error number in case maximum number of cutbacks is reached 2012-10-02 09:30:13 +00:00
Franz Roters 9fc46b4950 added /echo/ statements 2012-10-02 08:12:53 +00:00
Christoph Kords b99a846503 new scaling feature in numerics (unitlength) did not scale the reference coordinates in the first place; now this is taken care of in mesh.f90, so scaling should work properly 2012-09-25 16:21:58 +00:00
Christoph Kords d0fd3c03c5 forgot to check in; belongs to rev 1762 2012-09-24 16:22:25 +00:00
Martin Diehl 912277d1ed substituted the call to the flush subroutine with the intrisic flush(6) function 2012-09-24 12:10:28 +00:00
Christoph Kords 8336d0705c new numerics parameter "unitlength" that scales the model size in DAMASK; this enables to use very small models in marc without getting any numerical problems for example with contact which does not seem to work when using very small numbers 2012-09-24 06:13:26 +00:00
Martin Diehl b587bffdd5 added some 'protected' statements to variables that shouldn't be changed by other modules 2012-09-22 16:49:41 +00:00
Krishna Komerla 8ed69170c5 corrected wrong warning complaining about FFTW string when DAMASK_NUM_THREADS undefined 2012-09-14 16:39:42 +00:00
Martin Diehl 1cfc467705 added new cut back parameter for spectral solver and instrumented variables for use with doxygen 2012-09-13 09:48:38 +00:00
Duancheng Ma b9a2890665 fixed bug in loadcase rotation: when not specifying "deg" the rotation was reset to 0,0,0..! 2012-09-06 14:05:28 +00:00
Christoph Kords 29023cea3c minor correction of debugging output 2012-09-05 11:19:46 +00:00
Pratheek Shanthraj 330d71864e fixed bug with stress BC handling 2012-09-05 08:30:15 +00:00
Christoph Kords f153866030 introduced factor to control edge contribution to multiplication;
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
Martin Diehl 22812c9a91 some minor improvement on precision detection: checking only once (in prec and no longer in math and crystallite), added one more 4/8 switch for LAPACK, as there is no single precision FFTW, stopping compilation for spectral method if FLOAT=4
new function in IO to print integers without leading zeros, implemented it at some places in the new spectral solver (reporting still needs some serious polishing)
updated preprocessing for documentation to handle precision correctly
2012-08-30 20:26:28 +00:00
Martin Diehl 299d9e6bc4 fixed bug in seed initialization that didn't allow to redo calculations that started with a random seed. Now the whole random seed array is set to one value, previously only the first one was reported and the remaining ones were random
removed old random function used by halton
2012-08-30 14:58:30 +00:00
Christoph Kords d80b45c1d9 added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
Martin Diehl 8e3b547cbd changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
Martin Diehl 84e3f94424 added flush for easier debugging 2012-08-29 15:23:43 +00:00
Martin Diehl d83150be1b now capturing "terminallyIll" for basic solution, should end in a automatic cutback of time steps for the spectral solver 2012-08-29 05:50:42 +00:00
Martin Diehl 3106b8ce0c corrected definition of integer type for gfortran 2012-08-29 05:19:35 +00:00
Martin Diehl d089c12947 abaqus seems to have similar problems with the openmp lib as marc (use module vs. include file), i hope this fixes the crashes 2012-08-28 19:48:38 +00:00
Martin Diehl 5e9e8497e6 new solver is now compiling without a PETSc installation, however only the plain basic solver is available then.
also removed reporting of PETSc related variables in the case it is not installed/found
2012-08-28 19:19:47 +00:00
Martin Diehl 0f64289d75 fixed bug causing trouble with ifort 11 (abaqus) 2012-08-28 19:10:54 +00:00
Martin Diehl 0959ff3299 substituted hand written matrix inversion by LAPACK version with precision selection.
also introduced check for inversion into DAMASK_spectral_Utilities.f90 for the stress BC calculation. This part is further improved by using 5% of the reference stiffness to avoid trouble in the fully plastic regime (where the stiffness is underestimated)

Test for Marc 2010 is updated because the new inversion give slightly different results near 0 (order of e-13)
2012-08-28 16:59:45 +00:00
Martin Diehl 73349d02f5 merged precision info into the file prec.f90 and removed prec_single.f90
precision information is now parsed as a makro, defined by the compiler, eg. -DFLOAT=8 for 8 byte long floats or -- in case no values is given -- for the FEM wrapper by the interface files.

Please don't forget to run setup_code.py  !!!!!!!!!!!

abaqus_v6.env is adjusted to specify the standard precision (float=8, int=4) and got some extra compilation options, some deprecated warning supressors are removed

Optional Marc modification will follow that allow automatic selection of suitable precision
2012-08-28 16:08:17 +00:00
Christoph Kords f3e7b3cec8 added separate output of dipole formation rate for edge and screw 2012-08-27 15:57:31 +00:00
Christoph Kords aa380dcb08 added separate output of dipole formation rate for edge and screw 2012-08-27 15:57:22 +00:00