24 lines
1.0 KiB
Markdown
24 lines
1.0 KiB
Markdown
# Group21_Project
|
|
|
|
Problem Statement :
|
|
|
|
Implementation of a Speed Limit Indication System Using a GPS Module
|
|
|
|
Objectives:
|
|
|
|
1. The LED system on the microcontroller should indicate the vehicle's speed range using different colors for specific speed intervals.
|
|
2. The LED should remain off when the vehicle speed is equal to 0 km/hr.
|
|
3. The Green LED should turn on when the vehicle speed is greater than 0 km/hr and below 15 km/hr.
|
|
4. The Yellow LED should turn on when the vehicle speed is greater than or equal to 15 km/hr and below 30 km/hr.
|
|
5. The Red LED should turn on when the vehicle speed is greater than or equal to 30 km/hr and below 40 km/hr.
|
|
6. The Red LED should blink rapidly when the vehicle speed is greater than 40 km/hr.
|
|
|
|
|
|
Tasks :
|
|
1. Initalize UART for receiving data - Completed
|
|
2. Add Read data function - Completed
|
|
3. LED indication configuration - Completed
|
|
4. Initialize buffer to store data - Pending
|
|
5. Add received data to the buffer - Pending
|
|
6. Use received data to meet objectives - Pending
|