Lab8/main.c

#include <stdint.h>
#include <stdbool.h>
#include "tm4c123gh6pm.h"


void UART7_init(void);
void UART7_write(char data);
char UART7_read(void);
void PortE_init(void);
void LED_Control(char);


int main(void)
{
    char recievedchar;

    UART7_init(); // UART 7 Initialization
    PortE_Init(); // PORT E Initialization

    while(1)
        {
        recievedchar = UART7_read(); // Read a character from the UART

        UART0_Write(receivedChar); // Give the character back to UART

        LED_Control(receivedChar); // LED Control based on UART input
        }

}


void UART7_init(void)
    {
    SYSCTL_RCGCUART_R |= 0x80;   // Enable clock to UART7
    SYSCTL_RCGCGPIO_R |= 0x10  // Enable clock to Port E for UART7

    // UART7 TX/RX on PE1/PE0
    GPIO_PORTE_AFSEL_R |= 0x03;  // Enable alt function on PE0, PE1
    GPIO_PORTE_DEN_R |= 0x03;    // Enable digital on PE0, PE1
    GPIO_PORTE_PCTL_R |= 0x11;   // Configure PE0 and PE1 for UART
    GPIO_PORTE_AMSEL_R &= ~0x03; // Disable analog on PE0, PE1


    // UART7 initialization
    UART0_CTL_R &= ~0x01;        // Disable UART0
    UART0_IBRD_R = 104;          // Baud rate = 9600, Integer Baud Rate Divisor
    UART0_FBRD_R = 11;           // Fractional Baud Rate Divisor
    UART0_LCRH_R = 0x70;         // 8-bit, no parity, 1-stop bit, enable FIFOs
    UART0_CTL_R |= 0x301;        // Enable UART0, TX, RX

    }