..
config
added output of slip direction and slip normal
2013-05-23 08:19:36 +00:00
setup
removed old DAMASK_marcXXXX.f90 source files.
2013-06-06 16:04:40 +00:00
CPFEM.f90
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
DAMASK_abaqus_exp.f
replaced numerics_unitlength with mesh_unitlength
2013-05-17 16:52:19 +00:00
DAMASK_abaqus_std.f
replaced numerics_unitlength with mesh_unitlength
2013-05-17 16:52:19 +00:00
DAMASK_marc.f90
removed #define Marc and substituted #ifdef Marc by #ifdef Marc4DAMASK which is defined by either the submit scripts or DAMASK_marcXXXX.f90
2013-04-30 09:49:30 +00:00
DAMASK_run.py
error messages are now printed, added svn properties
2012-10-25 09:16:17 +00:00
DAMASK_spectral_driver.f90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
2013-05-13 09:44:23 +00:00
DAMASK_spectral_interface.f90
fixed bug when having . at end of directory name, added check to see if the specified working directory exists
2013-05-13 14:10:48 +00:00
DAMASK_spectral_solverAL.f90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
2013-05-13 09:44:23 +00:00
DAMASK_spectral_solverBasic.f90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
2013-05-13 09:44:23 +00:00
DAMASK_spectral_solverBasicPETSc.f90
introduced possibility so specify deformation gradient aim at end of load case, rate will be calculated using difference between start of load case and aim. Needed for cyclic loading.
2013-05-13 09:44:23 +00:00
DAMASK_spectral_utilities.f90
corrected PETSc debug and Capitalization
2013-05-16 08:55:10 +00:00
FEsolving.f90
removed #define Marc and substituted #ifdef Marc by #ifdef Marc4DAMASK which is defined by either the submit scripts or DAMASK_marcXXXX.f90
2013-04-30 09:49:30 +00:00
IO.f90
Fixed bug in math rotations: passive and active rotations were not clearly distinguished and partly mixed up; yet, luckily, only resulted in wrong output of euler angles.
2013-06-05 19:10:37 +00:00
Makefile
removed old DAMASK_marcXXXX.f90 source files.
2013-06-06 16:04:40 +00:00
compilation_info.f90
updated copyright header
2013-03-22 17:35:05 +00:00
configure
misplaced space corrected
2013-04-22 15:35:15 +00:00
constitutive.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
constitutive_dislotwin.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
constitutive_j2.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
constitutive_none.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
constitutive_nonlocal.f90
(again!) fixed bug that was introduced in rev 2085: messed up indices of stiffness matrix in calculation of Poisson's ratio
2013-05-26 14:31:31 +00:00
constitutive_phenopowerlaw.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
constitutive_titanmod.f90
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
2013-05-28 17:31:55 +00:00
core_quit.f90
updated copyright header
2013-03-22 17:35:05 +00:00
crystallite.f90
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
damask.core.pyf
"unitlength" parameter, which determines the physical size of the mesh, now available as a global mesh variable "mesh_unitlength" and written to the .mesh file during init.
2013-05-07 13:06:29 +00:00
debug.f90
simplified interface of CPFEM_general (removed P and F, made cs and dcs/dE optional)
2013-04-09 10:08:00 +00:00
homogenization.f90
simplified logic for single run, now not checking for extra arguments but simply checking if start and end elem/IP are the same
2013-04-26 13:23:36 +00:00
homogenization_RGC.f90
updated copyright header
2013-03-22 17:35:05 +00:00
homogenization_isostrain.f90
added possibility to select "mapping" of multiple grains.
2013-04-30 09:40:06 +00:00
lattice.f90
moved public data res,size and homog from mesh to DAMASK_spectral_utilities (as grid and geomSize)
2013-05-08 15:52:29 +00:00
libs.f90
set Lib_VTK_IO-master.zip and related files back to initial version, new version is not working with MSC.Marc 2010
2013-05-15 16:43:18 +00:00
material.f90
reworked distribution of microstructure constituents. now each material point represents "as good as possible" the fractional content of constituents.
2013-05-29 17:23:49 +00:00
math.f90
added public statements to fftw functions and constants after whole math module is private now
2013-06-06 09:25:27 +00:00
mesh.f90
replaced numerics_unitlength with mesh_unitlength
2013-05-17 16:52:19 +00:00
numerics.f90
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
prec.f90
added debugging possibility for MSC.Marc, rename parameters to CAPITALS
2013-03-31 13:06:49 +00:00
e6ca36c7d7