Commit Graph

72 Commits

Author SHA1 Message Date
Martin Diehl de96e99bca corrected determination of restartRead from commandline (now done by FEsolving instead of DAMASK_spectral_interface)
recompiled fftw libraries with --enable-shared to make them work with f2py
added draft for compilation test of spectral solver
2011-11-07 18:25:10 +00:00
Krishna Komerla 49c0b8a3fd restructured restarting capabilities 2011-11-07 11:04:57 +00:00
Martin Diehl c2eac36b48 started to implement restart facilities for spectral solver.
restart write is on per default
restart read is switched on by using --restart or -r INT where INT gives step at which the calculation should restart
setting INT to a value <1 will turn restart write off
2011-11-03 19:32:11 +00:00
Martin Diehl 680ba9082f removed deadlock when calling IO_warning(33)
polished IO_error and IO_warning
checked OpenMP critical statements in DAMASK_spectral.f90
corrected writing of headed in DAMASK_spectral.f90
2011-11-02 14:38:42 +00:00
Martin Diehl c13aa2a829 first try of implementing a rotation of the loadcase coordinate system. Seems to work so far for one loadcase and homogeneous materials. 2011-10-24 18:26:34 +00:00
Krishna Komerla 0a46741a77 changing header to correct number of increments 2011-10-18 16:42:06 +00:00
Martin Diehl ea2ba1573c polishing
!incremental update, wait for commit of damask_spectral.f90 before checking out
2011-10-18 09:22:33 +00:00
Franz Roters 58917b5abe corrected error messages
you can now switch of shear banding by seting sb_velocity to zero
stacking fault energy parameters are now read from material.config
2011-09-26 09:55:08 +00:00
Martin Diehl c35ea33f8e did a lot of polishing:
- removed unnecessary "return" before end of subroutine or function:
- changed undetermined array length (:) to (1:3)

To prevent problems with some code analysing tools:
- "3D oneliner loops" (with ";) only for "do" and "enddo" at the same time
- removed line continuation in OMP statements

made the makefile more flexible, removed heap-arrays switch
2011-09-13 15:54:06 +00:00
Martin Diehl e8628996ff added IO error in case mixed BC that allow rotation are given 2011-09-02 13:50:05 +00:00
Martin Diehl 4fb1cb8f87 merged calcmodes, i.e. equilibrium and fulfilling of stress BC is done in one step,
made convergence independent of size and resolution,
polishing output in DAMASK_spectral.f90
added function to compute eigenvalues without eigenvectors and function to convert a 3x3 logical to a 9 vector in math.f90
removed obsolete variable in numerics.f90
2011-08-26 14:06:37 +00:00
Martin Diehl 75c67f53f7 introduced alternative location for material configuration.
If present, the >>>JOB.materialConfig<<< file takes precedence over the standard >>>material.config<<<
2011-08-02 10:14:16 +00:00
Franz Roters e92e5cae53 restarting now works with Abaqus (standard, cannot test explicit due to lack of license)
you have to specify the job you are restarting from in the job description (cae), if you prepare your input file by hand this is the first line after *Heading
example: if the first job was using Oldjob.inp the first entry in the job description needs to be Oldjob (without the .inp)
as for Marc restart works only from last converged increment, i.e. ther restart writing should be specified like this:
*retsart, write, frequency=1, overlay
Overlay is not essential but saves a lot of disk space and as stated before you can only restart from the last converged increment anyway
2011-07-18 09:15:20 +00:00
Philip Eisenlohr 8c65cb9ea6 small output polishing 2011-07-15 12:25:38 +00:00
Martin Diehl 09ba92c26e added and rearranged error messages, polished output and simplified calculation of f depending on fdot or L
guessing along former trajectory is now on per default, 'guessreset' and 'dropguessing' switch it off.
2011-07-14 09:37:31 +00:00
Martin Diehl a08eaecf4e polishing (names of variables, spaces, comments etc.)
renamed mpie to DAMASK in IO.f90 error message
2011-07-07 15:27:35 +00:00
Philip Eisenlohr 314adae1bb spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition.
example: ... time 1 incs 100 freq 10 will write output at times 0.0, 0.1, 0.2, ... , i.e., every ten increments only.
2011-06-15 17:48:14 +00:00
Christoph Kords 9a64f3dd85 * comments are now recognized by IO even when they do not appear at the beginning of the line
* no need for the zero entries in the material.config anymore
2011-05-30 09:09:19 +00:00
Franz Roters 08d39342e4 reworked restarting for compatibility with abaqus (not yet fully working)
added new orientation feature for direct simulation:
  component type (random) asigns random orientation to an entire grain
2011-05-28 09:44:43 +00:00
Philip Eisenlohr 808a6d6ad6 + error box + now tells error number (useful for Abaqus) 2011-05-13 16:55:13 +00:00
Philip Eisenlohr fa98133f8e renamed interface from "mpie_interface" to "DAMASK_interface" 2011-05-11 17:01:03 +00:00
Philip Eisenlohr 660c9212f8 introduced error 667 for out of bounds user result requesting 2011-05-04 16:02:18 +00:00
Franz Roters 7d84a0911e removed unused variables 2011-04-13 14:16:22 +00:00
Franz Roters c1b8391110 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
Franz Roters fcdb805225 added copyright text to all f90 (free) format files 2011-04-04 14:09:54 +00:00
Christoph Kords 31a570768b new error 237: singularity in internal stress calculation 2011-03-22 13:58:42 +00:00
Christoph Kords 235266b169 openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:

DON'T use implicit array subscripts:
example:    real, dimension(3,3) :: A,B
                  A(:,2) = B(:,1)               <--- DON'T USE
                  A(1:3,2) = B(1:3,1)       <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to  prevent memory leaks.

Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)

Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 10:46:17 +00:00
Martin Diehl 8dd1a694a3 extended IO to cope with different name for solverJob and Model
polishing, added error codes
added FFTW library files
2011-02-21 14:37:38 +00:00
Christoph Kords 24d33bf2ff * added a new material parameter "surfaceTransmissivity" (default value 1.0) which allows to change the transmissivity of the material surface between 0 and 1
* now complaining when encountering an unknown nonlocal parameter in material.config
* use same error ID for all material parameters out of bounds
* symmetric flux calculation in side dotState can now be omitted (because of new treatment of periodicity)
* switching back to "local flux balance" (add leaving and entering fluxes at central MP, don't touch neighbor) instead of "flux distribution" (subtract leaving fluxes from central MP and add them at neighboring MP). This has the advantage that there is almost no need for CRITICAL statements in parallelization, so hopefully this results in some speed up.
2011-02-16 16:35:38 +00:00
Christoph Kords faba13f7fd * now able to introduce some scatter in the initial single dislocation density (only for nonlocal model!) ; setting the parameter "rhoSglScatter" to a positive value generates a gauss distribution for the dislocation density with standard deviation equal to "rhoSglScatter"
* dislocation stress calculation is only done for nonlocal constitution ("/nonlocal/" keyword is present in material.config)
2011-02-04 15:41:32 +00:00
Martin Diehl fec2c14a4e removed hard-coded tolerances from mpie_spectral and put them to numerics/IO
removed storage of full cauchy stres field from mpie_spectral.f90, only average is stored now
added cauchy stress and von mises equivalent calculation to spectral post.
2011-01-31 17:07:42 +00:00
Christoph Kords 05d4d5fef2 * kinetics now according to Mohles; enables solid solution hardening
* changed example in material.config accordingly
2011-01-26 10:17:42 +00:00
Christoph Kords 062c6b3d54 * allow zero cutoff radius
* added missing error codes
2011-01-12 12:36:48 +00:00
Christoph Kords bca951325d * cpfem will now produce a warning if all components of the stiffness tensor are close to zero 2010-11-04 18:18:01 +00:00
Philip Eisenlohr 0dd99cb965 lattice: (re)introduced _symmetryType function to replace unsafe lookup array
numerics: polishing

mpie_cpfem_marc: polishing

..powerlaw: aware of symmetryType function

crystallite: aware of symmetryType function, smaller leapfrog acceleration

IO: new warning 101

CPFEM: range of odd stress is now -1e15...+1e15, H_sym is used for stiffness
2010-11-03 14:58:11 +00:00
Denny Tjahjanto 763c20b302 Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc.
Major changes:

CPFEM.f90 => 
1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change).
2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read).
3. Writing primary state variables into binary files (Marc flag: restart write).

FEsolving.f90 =>
1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job).
2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme

homogenization_RGC.f90 =>
1. Just syntax polishing.

IO.f90 =>
1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose.

mpie_cpfem_marc.f90

1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 14:39:18 +00:00
Martin Diehl 3c502561ee added matrix multiplication 3333x33 to math.f90
added some parameters for spectral method to numerics.f90 (tolerance)
changed error message concerning spectral method in IO.f90
corrected calculation of stress BC in mpie_spectral.f90
2010-10-13 16:04:44 +00:00
Christoph Kords fce7590c17 * now able to choose method for state integration (integrator and integratorStiffness in numerics.config); standard is "Fixed Point Iteration", which is basically the same as before; others available are "Explicit Euler", "AdaptiveEuler", "Classical Runge-Kutta" and "Runge-Kutta Cash-Karp"
* now remembering stiffness similar to how we do it for Lp etc.; avoids undefined stiffness values for nonconverged stiffness calculation

* non-local stuff:
   * changed non-local kinetics (Gilman2002)
   * enforce zero shearrate for overall carrrier density below relevant density
   * enforce zero density for those states that become negative and were below relevant density before
   * dislocation velocity is not limited by V^(1/3) / dt anymore
2010-10-01 12:18:49 +00:00
Philip Eisenlohr 298cecbfec corrected syntax errors (long lines, line continuation by \) and logical mistake in mpie_cpfem_marc / abq_std which went unnoticed in ifort. Using SunStudio f90 surfaced those... 2010-08-03 23:47:00 +00:00
Philip Eisenlohr 4d110126da adopted improvements done by Arun Prakash.
mesh:
elemType identification based on lower case
Abaqus now reports more errors

IO:
new function to inquire whether inputfile contains "parts"
new function to assemble multiply included inputfile into a flat one
awareness of range generation in element numbers
error reporting
2010-07-13 10:26:07 +00:00
Philip Eisenlohr 8ea52ac495 mpie_spectral now can read loadcase data
adapted error codes
2010-06-10 14:51:10 +00:00
Denny Tjahjanto 9932c90c73 restoring the crystallite.f90, IO.f90 and material.f90 to the version 575. the version 576 of these files contain some uncleared debugging statements. 2010-05-26 16:34:44 +00:00
Denny Tjahjanto d114a600c3 fixed some errors in QuaternionToEuler, RToQuaternion to get the correct texture representation in the output. 2010-05-26 15:52:54 +00:00
Christoph Kords dba4ae7ef1 new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context.
"defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 14:55:11 +00:00
Franz Roters 483584ceb3 improved version of general I/O functions
renamed module cpfem_interface to mpie_interface
2010-05-11 06:57:15 +00:00
Franz Roters e810e5cfa1 changed fileopen routines in IO.f90 to use solver dependant functions defined in the interface routines
DID NOT test ABAQUS versions yet, not shure whether (V)GETOUTDIR returns path with or without terminating slash
2010-05-10 15:02:59 +00:00
Philip Eisenlohr 97f206d0bc new errors regarding Spectral method input file parsing
mesh setup from Spectral input file
$Id$ in FEsolving activated
2010-05-06 16:40:47 +00:00
Philip Eisenlohr e4067f2d26 debugged zoo of rotation operations and transformations
all angles now in radians

introduced a rudimentary check in math_init to complain (IO_error) about broken transformations (e.g. quat --> R --> quat)
2010-05-06 14:07:21 +00:00
Philip Eisenlohr cecffffe2b disorientation with symmetryType == 0 returns plain misorientation
complain about unknown symmetryType
2010-05-04 12:54:13 +00:00
Philip Eisenlohr 9b5047c828 corrected two OMP CRITICAL terminations 2010-04-06 06:47:15 +00:00