9544fe55a6
FEM solver for vacancy diffusion
2014-11-07 20:40:54 +00:00
0ad917dceb
nicer FEM parameters
2014-11-03 10:36:07 +00:00
261bffa745
switched to smoother traction separation law for better convergence. anisotropic brittle now working.
...
lowered default max iterations for FEM
2014-11-01 17:51:35 +00:00
b54782046d
increased size of petsc_options string
2014-10-21 16:25:53 +00:00
d095c2484d
simplified multi processor (MPI) reporting
2014-10-10 13:08:34 +00:00
c8929b47d3
only output from the root processor for parallel runs
2014-10-09 20:23:06 +00:00
baa08d8155
made analytic tangent default for spectral solver
...
removed possibility to compile without PETSc (a lot of effort for little/no use)
2014-10-01 12:29:12 +00:00
3da023a1ba
thermo-mechanical example
2014-09-29 12:40:57 +00:00
cc7064d025
changed default petsc_options for FEM and removed unused variables
2014-09-16 10:02:37 +00:00
6612603a23
changed naming convention (keeping backward compatibility in numerics.config):
...
myspectralsolver --> spectral_solver (called "spectralsolver")
myfilter --> spectral_filter (called "spectralfilter")
2014-09-03 19:59:47 +00:00
977392cfe7
compiler for spectral solver is now the version provided by petsc (similar to linking)
...
added option to compile FEM solver with same Makefile
2014-08-24 22:07:53 +00:00
47707f86b6
fixed typo
2014-08-11 21:28:15 +00:00
b36b38d7c3
introduced non-zero residual damage to prevent stiffness matrix from being ill-conditioned
2014-08-11 17:13:06 +00:00
d594996e7c
added mesh dependent characteristic length as a numerical parameter needed for gradient and phase field problems on unstructured meshes
2014-06-24 23:18:07 +00:00
01a0a0d0bb
reverted some changes from previous commit
2014-06-06 08:57:24 +00:00
639ca89133
DAMASK (except nonlocal) now sees and interacts with FEM solver
2014-06-06 00:38:29 +00:00
e62c5fdc05
added consistency check in material.f90: Microstructure index in geometry must not exceed number of sections in material.config
...
better error messages in case of recursive file input in IO.f90. also supports absolute path now
2014-05-15 09:40:43 +00:00
01416b7ab6
set num threads back and forth between abaqus and DAMASK (like marc)
2014-04-29 16:11:13 +00:00
84ce6e429a
changed handling of non-converged BVP solution: By default, exit if no solution is found to prevent "user errors"
...
Removed ambiguous "regridMode" keyword which was used to trigger this behavior in favor of "continueCalculation", Set this to 1 to get back old behavior, e.g. report non-converged increments.
2014-03-31 10:04:11 +00:00
4bb5439994
removed copyright from *.f90 and *.f files, will be added using the deployMe script for release/nightly build. Now based on presence of svn:keywords property set (usually "Id"). Similar thing will be done for .py, .sh, and .config files but more involved because they might be executable
2014-03-29 08:20:36 +00:00
b9722b866c
improved error handling when getting number of threads
2014-02-28 10:30:07 +00:00
bc4cc20c55
slightly polished makefile and numerics, recompile fftw with icc; still not running with ifort 14.01
2014-02-06 10:41:34 +00:00
7885ebaf8f
added 'reset' flag for recursive function IO_read, need to reset stack when stopping exectution (will be used by constitutive and homogenization)
2013-12-11 16:49:20 +00:00
dc95c82d4a
removed temperature integration and corresponding data structures and debugging options
...
temperature is stored in crystallite, but homogeneous on one IP (not an component (grain) quantity and an input value parsed in by the BVP solver.
introduced heat, a component (grain) quantity which is homogenized before returned to the heat transfer solver.
went ahead with removal of dummy functions in homogenization and constitutive, this time mainly reduced function signatures to reflect actually needed quantities.
2013-10-16 13:04:59 +00:00
a2169e338f
fixed type-casting problems (mainly with Lib_VTK_IO)
2013-09-26 17:21:46 +00:00
cb16b30409
set output order of spectral parameters to more reasonable one
2013-09-17 09:19:16 +00:00
7f3c24e1f1
fixed some buggy last minute changes in the last commit
2013-08-08 09:13:29 +00:00
ac92b90e0b
fixed al and pol solver, now checking for div(p) = curl(f) = 0
2013-08-07 17:20:05 +00:00
2dc985f558
set tolerances to useful values and renamed them.
...
allowed "keyword = value" in numerics.config (simply removing "=" from line)
2013-07-31 15:03:38 +00:00
81531097f1
changes on convergence tolerances of AL and Polarisation, switched back to immediate correction of stress bc but only when last two average stresses are close to each other (cosine decay)
2013-07-30 15:32:55 +00:00
98528f9a89
added possibility for multi-level inclusion of files in *.config and loadcase files.
...
include subfiles by stating
{path/to/include}
2013-06-26 19:19:00 +00:00
1c25403b5b
changed default values of AL spectral solver tolerances. should've been done along with commit 2254.
2013-06-12 10:06:04 +00:00
c7ba8a2a9b
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
8b2d9d8155
further improvements on implementing the plain mode
2013-04-16 17:07:27 +00:00
ddcc795461
allowed arbitrary grid (formerly know as resolution), i.e. any integer>1 in each dimension is possible.
...
removed square root correction for divergence (doesn't make sense)
fixed FFT debug of spectral solver
2013-04-10 10:19:16 +00:00
965ab38217
corrected error bounds for spectral parameter "maxCutback"
2013-03-28 16:04:47 +00:00
7f37f55904
added missing line continuation in numerics and explicit private statements in the other files
2013-03-28 10:37:00 +00:00
d2ae06015a
moved "Random is random" to output of random seed, cleaned up a little
2013-03-28 10:02:11 +00:00
15b6242585
set more appropriate default values for spectral solver tolerances (abs stress BC was at huge())
2013-03-26 16:36:52 +00:00
e6f6c22a30
polished Abaqus Standard, changed inclusion of OMP functionality from "spectral style" (include) to "marc style" (use) to prevent explicit from crashing
2013-03-25 18:25:15 +00:00
02f092492e
updated copyright header
2013-03-22 17:35:05 +00:00
dd06d07e1c
set default number of iteration for spectral solver to 250 instead of 40, abaqus doxygen now does the correct inclusion (everything appeared twice before)
2013-03-14 23:10:02 +00:00
1779510dda
remove some unused variables, set default value for divergence calculation to 1.e-5 and made calculation independent of dim and res
2013-03-12 18:48:28 +00:00
0209a1d5a7
restructured AL solver to resemble polarization scheme and introduced alpha and beta parameters in numerics to determine what kind of solution you want. alpha = beta = 1 results in the AL scheme. alpha = beta = 2 results in the accelerated scheme. safe values are anything in between. changed the solver to use stress calculations on the campatible field which seems to result in faster convergence.
2013-02-28 17:35:02 +00:00
59da88460e
preparation for introduction of plain mode and restructuring of calc modes for CPFEM_general
2013-02-27 20:41:14 +00:00
07ff1f7c93
reporting current time for most module inits
2013-02-25 16:34:59 +00:00
a98be4e0cf
IO_error and IO_warning crashed for string of zero length (or only containing whitespaces), fixed now.
...
Also added BEGIN and END statement to numerics in case of non-presen DAMASK_NUM_THREADS, would prevent this error and is better for debugging
2013-02-20 21:56:59 +00:00
c7c81a5ab5
removed unused variables and declared external functions as external
2013-02-11 09:44:17 +00:00
e9f351c69b
forgot to commit
2013-02-08 15:56:58 +00:00
c6a79d2b3d
divergence_correction for basic solver variants has now 3 possibilities:
...
0: uncorrected, slope per sidelength (physical dimension) e = res/dim
1: corrected by sidelength, slope per unitlength e = res/1
2: corrected such that distance between FPs e = 1
alway regarding the medium length of x,y,z direction
2013-01-16 10:40:53 +00:00
Pratheek Shanthraj