4c20daa00d
state loop count was wrong for adaptive euler integration
2010-10-28 12:22:17 +00:00
17812c1f9e
added raw output, gmsh output is still included
2010-10-27 17:15:49 +00:00
9320d48305
in RKCK45 state integration: dotState was not saved in last Runge-Kutta step
2010-10-27 08:48:04 +00:00
f5f3ef5ecc
* have to reset dotState to zero before call to collectDotState (only important for nonlocal calculation)
...
* in Fixed Point Iteration: update dependent states after state preguess was missing; on the other hand, the first call to constitutive_microstructure was obsolete
2010-10-26 14:04:33 +00:00
4439282239
no change to previous version, just forget to mention one important change of the last revision:
...
* fluxes are now again calculated and distributed only! by the originating material point. this means that the central MP might change the dotState of its neighbor. have to see whether locks slow down parallel computation
2010-10-26 13:49:58 +00:00
62d06001ea
* corrected compatibility for screws (always positive)
...
* detection of grain boundary in constitutive_nonlocal_microstructure with the help of transmissivity
* enforce positive densities in constitutive_nonlocal_microstructure (needed because dotState does not create cutbacks for negative densities anymore)
* reset single mobile densities below certain threshold to zero (also done in constitutive_nonlocal_microstructure)
* constitutive_nonlocal_kinetics only gets local state variable as input, no need for the entire array here
* dv_dtau is always positive
* multiplication is only active when there is already some initial density of the respective type
2010-10-26 13:42:18 +00:00
366d52bd71
* former "relevantRho" and "relevantResistance" is renamed to "atol_rho" and "atol_resistance" and now used as an absolute tolerance for the state residuum. before it was used rather as significant state, so whenever the state dropped below that value it was considered converged. (In dislotwin and titanmod constitutive law there is only one value atol_rho which is used for all the states, though the state array consists not only of densities. We need further parameters here!)
...
* somewhat simplified convergence check for adaptive euler and runge-kutta
2010-10-26 13:16:37 +00:00
26cb618b6d
changed calculation to small strain/cauchy stress
2010-10-20 11:27:10 +00:00
da35eaa8a1
changed spectral algorithm to version proposed by Ricardo 2001 (using tau_field instead of stress_field).
...
Still using largestrain-formulation
2010-10-20 09:27:47 +00:00
3837dad51e
fixed bug in mpie_spectral.f90 concerning spectral method (now deltaF hat get the right value)
...
added mpie_spectral2.f90, a version that should get the new algorithm proposed in 2010. until now, it is the same as mpie_spectral.f90 (large strain formulation by suquet et al) but with c2c, c2c FFT
2010-10-20 08:59:00 +00:00
e49de75fe3
stiffness calculation now only needs a single function call to the respective integrator method instead of one call per grain (which seems to heavily slow down the computation). also no special treatment for non-local material points anymore.
2010-10-15 14:57:13 +00:00
fffe731447
* had to correct nonlocal slip system compatibility and flux calculation. last update gave wrong results.
2010-10-15 13:19:26 +00:00
61f8a5fcbe
corrected UpperCase "SolidSolutionStrength" in config file parsing.
2010-10-15 12:59:00 +00:00
3c502561ee
added matrix multiplication 3333x33 to math.f90
...
added some parameters for spectral method to numerics.f90 (tolerance)
changed error message concerning spectral method in IO.f90
corrected calculation of stress BC in mpie_spectral.f90
2010-10-13 16:04:44 +00:00
724960686f
* in nonlocal model: dislocation flux now with valid description also for large angle grain boundaries; transfer of dislocations from one slip system to the other according to new variable "constitutive_nonlocal_compatibility" which depends on the angle between slip plane normals and slip directions and is updated once per cycle in function "crystallite_orientations"
...
* reactivated debugging functionality for "non-standard" integration methods
2010-10-12 13:08:54 +00:00
efd92d9b51
allocation of special state variables for "non-standard integration" was erroneous. used to produce segmentation fault for integration method 4 and 5.
2010-10-12 12:11:24 +00:00
fce7590c17
* now able to choose method for state integration (integrator and integratorStiffness in numerics.config); standard is "Fixed Point Iteration", which is basically the same as before; others available are "Explicit Euler", "AdaptiveEuler", "Classical Runge-Kutta" and "Runge-Kutta Cash-Karp"
...
* now remembering stiffness similar to how we do it for Lp etc.; avoids undefined stiffness values for nonconverged stiffness calculation
* non-local stuff:
* changed non-local kinetics (Gilman2002)
* enforce zero shearrate for overall carrrier density below relevant density
* enforce zero density for those states that become negative and were below relevant density before
* dislocation velocity is not limited by V^(1/3) / dt anymore
2010-10-01 12:18:49 +00:00
9927cd7adb
changed format of resolution. instead of reading exponent of two, now the number given equals directly to the number of FPs. Allows us to use arbitrary number of FPs.
...
example:
OLD: reading 5 results in 2^5=32 FPs
NEW: reading 33 results in 33 FPs
2010-10-01 10:42:15 +00:00
2cc7bc38d7
Fixed a missing ','. Assigned plane and direction names.
2010-10-01 06:32:44 +00:00
1ae252c1ce
altered hexagonal slip systems
...
(needs comparison to former set, which is potentially wrong)
2010-09-30 17:31:19 +00:00
b85f9b0770
material.config: changed texture of microstructure 1 from 1 to 3, because 1 needs a ODF file which is not in the repository and makes the one_element_model.proc complain.
2010-09-30 12:55:38 +00:00
a8dfdc6487
added _mul33xx33 double contraction: A_ij * B_ij = scalar
2010-09-30 09:32:49 +00:00
cb4b4afc88
corrected header for math_qRot
2010-09-30 08:46:58 +00:00
b259fbd9c6
1) added distribution of leapfrog breaks
...
2) lattice_symmetryType is now a function (former lookup array was buggy)
3) stricter check of state var values (>0!) and memory deallocation done
2010-09-30 07:31:53 +00:00
e562df35a9
Added more state dependent variables in post results.
2010-09-29 06:35:08 +00:00
5a51082977
polishing, changed calculation of stress BC.
...
prevent updating of gamma hat in case of perfect plasticity
2010-09-24 13:27:53 +00:00
d94236b2d6
Declaration of filename etc. was missing. Fixed now.
2010-09-23 09:13:46 +00:00
83a921eec2
crystallite: polishing
...
rest: added "$ID" and line ending settings...
2010-09-23 08:05:50 +00:00
a467fb4ae3
forgot "$ID" and setting line endings...
2010-09-23 08:03:00 +00:00
89136afade
debug now has config file, too
2010-09-23 08:01:41 +00:00
6ea8623f65
added functions math_mul33x3_complex math_Plain99to3333 to math.f90.
...
mpie_spectral.f90 uses both functions
math_Plain99to3333 is used for inversion of c0
math_mul33x3_complex is used for equilibrium check in fourier space
also did some cleaning up on mpie_spectral.f90
2010-09-22 12:04:43 +00:00
80618c9814
Cleaned-up, rearranged state variables
2010-09-22 09:00:40 +00:00
7548858ffa
Some useful changes in damper for quicker convergence.
2010-09-22 08:54:36 +00:00
604992a9e1
fixes bugs in screen output, changed gmsh output, now the deformed mesh is written out
2010-09-22 08:51:34 +00:00
6920d8d939
cleaning up, added new output to gmsh and to screen, prepared calculation of deformed mesh
...
new convergence criteria: divergence of stressfield (in fourier space)
2010-09-21 15:38:25 +00:00
8488cafe3a
now consistent with numerics.f90 values
2010-09-21 14:37:52 +00:00
18c86ca0b1
Updated corresponding files for titanmod constitutive
2010-09-13 09:29:03 +00:00
9a20f742ea
leaner memory requirement to store states and their rates when calculating the crystallite stiffness
2010-09-13 09:13:25 +00:00
1693bfca47
changed calculation of defgrad from cauchy-stress to pk-stress, now working in large-strain-formulation.
...
output of msh-file changed to deformed configuration, removed output of defgrad as a field
2010-09-07 16:37:55 +00:00
3c5f38643d
Brushed up accountability of twinning to Lp
2010-09-07 14:44:37 +00:00
7d4c7f7fa7
corrected bug in debug: stressloop info was erroneous
...
mesh init now showing much more ip statistics in verbose mode
2010-09-07 09:06:02 +00:00
a3c92061f9
1) terminallyIll was reset before FE did cutback --> useless extra calculations of same problem over and over...
...
2) local stiffness calculation is now standard for non-local grains
3) stressLoopDistribution discriminates between (a) central solution and (b) stiffness perturbation
4) debugger is switched on as standard... (but verboseDebugger not!)
2010-09-06 16:06:41 +00:00
00922705eb
now using current average stiffness for reference material stiffness
2010-09-06 10:00:59 +00:00
c19524f264
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization
...
2) brushed up the output to be more easily readable/understandable
2010-09-01 21:04:02 +00:00
4f29e8c2fe
Introduced twinning. Twinning based on accumulated shear on twin systems. No slip-twin interactions yet.
2010-09-01 10:07:52 +00:00
a5c228fd02
changed back transform to complex-to-real, removed redundant variables, reduced size of arrays where possible
2010-09-01 08:05:11 +00:00
85febf0803
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile
...
changes on mpie_spectral.f90:
new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange.
ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 16:39:38 +00:00
05568ef73b
calculation of state damper was erroneous for use with nonlocal and other constitution at the same time
2010-08-26 12:54:31 +00:00
197d7ea8d9
rearranged output statements in crystallite init for better readability in output file
2010-08-26 09:52:40 +00:00
ec4269bdd8
Added 'dislocation-type' dependent interactions. Ideal for hexagonal and BCC structures.
2010-08-23 11:36:51 +00:00
Christoph Kords