d3d0cfdab1
common blocks from 2012
...
updated setup to also create DAMASK_marc2012.f90
2012-06-13 07:30:27 +00:00
a5c27f22ca
now uses unit 5 for file name inquiery (unit 6 points to stdout in 2012, might be a bug though)
2012-06-13 07:28:43 +00:00
5b7f2e122e
fixed usage of OpenMP function library
2012-06-12 09:44:05 +00:00
fc7b4d6471
new function stateJump, which takes care of immediate changes in the state (deltaState); this introduces discontinuities in the state evolution; therefore this is always and only once done after each integration step, so no evaluation of deltaState for intermediate steps of e.g. the Runge-Kutta integrator; otherwise integration becomes a pain without significant gain in accuracy
...
deltaState now successfully tested for nonlocal model; was not correct for integrators 1,4,5 before
2012-06-06 15:11:30 +00:00
fa7f9866df
removed phase contrast/preconditioning
...
added information on itmin in output, impoved output
set exit code to 0 on successful termination (seems to be unix standard)
exit codes:
0: successful termination
1: error (using IO_error)
2: require regrid
updated the AL solver, still VERY experimental
2012-06-05 16:34:20 +00:00
4b6800b89a
removed some unwanted open statements when writing out the sizeState
2012-06-05 13:13:33 +00:00
01522cf6f2
check for valid elasticity model
...
improved error message in case of unknown elaticity/plasticity model
2012-06-02 14:23:28 +00:00
3af9165b08
useless debugging inforomation (asking for elastic moduli output) is removed
2012-05-31 09:25:04 +00:00
145d971d7e
added some debug output
2012-05-30 08:05:36 +00:00
5cc73a15a9
small correction in debug output
2012-05-30 07:41:22 +00:00
0127828f70
corrected initialization order
2012-05-29 15:08:18 +00:00
e1c5671e1f
relaxed error message triggering such that purely elastic calculations and more than one constitutive instance using hex lattice are possible. no twinning possible if no slip system exists
2012-05-24 14:08:48 +00:00
1003cfa7f8
added missing space in makefile, made removing of old files in Makefile silent and updated files for tests to current versions
2012-05-23 18:08:34 +00:00
c607441717
(likely) fixed a bug in the FFT-based geometry reconstruction. For (hopefully) correct math see Appendix B in paper.
2012-05-22 18:35:15 +00:00
bbf790a0a5
Input parameter 'QedgePerSbSystem' which denotes activation energy for each shear band system is added
2012-05-22 16:10:28 +00:00
9201133913
activated keyword expansion
2012-05-22 12:45:37 +00:00
cec3357e8f
corrected bug causing wrong element construction when using spectral solver. Also improved error messages for invalid resolution, dimension, and homogenization.
2012-05-21 09:06:02 +00:00
20f203f799
allow minimum stable dipole height equal to zero; ensure that maximum stable dipole height is not smaller than the minimum value
2012-05-20 13:57:35 +00:00
5b02d4e8eb
dipole dissociation and formation by change in stress as new mechanism in deltaState; had to add dipole height to state variables, which is however updated by deltaState instead of microstructure; alternatively microstructure had to know the current stress state
2012-05-18 14:35:52 +00:00
4da6907648
moved remobilization of dead dislocations from dotState to deltaState
2012-05-18 13:35:44 +00:00
a5c1624648
check for invalid mesh type once in constitutive_init and not every time constitutive_nonlocal_dotState is called
2012-05-18 13:15:23 +00:00
8c849d62ee
small corrections for how to treat the new deltaState in FPI and euler integration; all integrators successfully tested with j2
2012-05-18 13:00:15 +00:00
abbae76c51
instantaneous jumps in the state by constitutive_deltaState are now incorporated for all state integrators. still they (should) not influence the result, since all constitutive laws simply return zero for the deltaState
2012-05-17 15:25:21 +00:00
351c2c6e65
deltaState depends on the current state, no the state at the beginning of the timestep
2012-05-17 12:18:30 +00:00
f6d5efeed3
removed arguments Fe and Fp from collectDeltaState function call
2012-05-17 11:04:22 +00:00
a54439e3b5
dotState does not have to be reset to zero. this is a remnant from older versions when the dotState for the nonlocal model used to be updated by the neighboring integration point
2012-05-16 15:35:14 +00:00
84d4652a07
all constitutive modules now contain a new function "deltaState", which in the future allows to have an instantaneous and incremental change of the state (additional to the rate based evolution with dotState).
2012-05-16 14:43:26 +00:00
df2d520630
stripping abaqus comments is now aware of damask comments
2012-05-15 14:59:26 +00:00
701cf2e71b
replaced duplicated math entry by missing mesh entry
2012-05-15 14:58:47 +00:00
0d745adfa0
corrected NaN in prec_single.f90 (was already silent but with typo), polished output and added switch in order to check range on all files except of prec.f90 (in which NaN is defined)
2012-05-11 12:46:17 +00:00
7ee368f324
check whether there is any constitutive output
2012-05-11 07:38:20 +00:00
f8f9c089d6
check for NaN in math_QuaternionInSST
2012-05-11 07:37:32 +00:00
babf2647fb
use non signaling version of NaN
2012-05-11 07:35:52 +00:00
ce83026965
corrected bug in fft based geometry reconstruction causing mirrored geometries
2012-05-09 14:56:25 +00:00
d11aa15a67
changed indices counting (fortran to python style, easier division to get rid of periodic copies)
...
corrected f2py pyf file
2012-05-09 10:09:56 +00:00
fbd075dc6e
corrected automatic determination of resolution
2012-05-08 15:12:43 +00:00
c752dd5474
regridding is now working, changed the subroutine into a function
...
changed order of arrays in nearest neighbor search to make it fortran fast
constitutive.f90 and homogenization.f90 write state size out during initialization
setup/setup_processing.py is using byterecl to be compatible with binary files written out by solver
2012-05-08 14:57:06 +00:00
a9a72cee97
fixed bug in nearest neighbor search, corrected error message for kdtree2.f90
2012-05-08 13:16:59 +00:00
eb8265b914
fixed potential division by zero error discovered by our American friends
2012-05-08 07:16:00 +00:00
bdc46a8828
using better measure (norm) of phase contrast for preconditioning
2012-05-07 08:12:13 +00:00
4b18278781
reworked neares neigbor search subroutine, now also works for voronoi tesselation (general nn search in periodic cell)
2012-05-04 13:07:37 +00:00
863f0c766e
removed line continuation causing trouble
2012-05-04 08:19:12 +00:00
b4775249e8
corrected standard check to make f2py working with gfortran
2012-05-03 17:12:36 +00:00
26c6063a2c
utf8 encoding output to screen now for all solvers using intel ifort>10 or any gfortran (old versions might not support it, but we don't use them anyway)
2012-04-28 10:46:41 +00:00
dbeac18df6
no more dropping of comments in Abaqus input file assembly
2012-04-27 14:33:39 +00:00
83e89fba3c
improved regridding, especially interfacing to python (also for nearest neighbor search)
2012-04-24 17:02:27 +00:00
e33c34d86b
corrected wrong integer arithmetics in calculation of coordinates in DAMASK_spectral.f90
2012-04-24 16:59:38 +00:00
83e22c00a2
added missing allocation of slopeLnRate array.
...
changed parsing to lowercase name.
2012-04-20 12:18:38 +00:00
d2c4874db3
several small corrections/polishing
2012-04-20 11:58:41 +00:00
c889d20ba0
added simple preconditioning to improve convergence for high phase contrast materials in standard algorithm
2012-04-20 09:42:57 +00:00
Franz Roters