Commit Graph

199 Commits

Author SHA1 Message Date
Christoph Kords fc7b4d6471 new function stateJump, which takes care of immediate changes in the state (deltaState); this introduces discontinuities in the state evolution; therefore this is always and only once done after each integration step, so no evaluation of deltaState for intermediate steps of e.g. the Runge-Kutta integrator; otherwise integration becomes a pain without significant gain in accuracy
deltaState now successfully tested for nonlocal model; was not correct for integrators 1,4,5 before
2012-06-06 15:11:30 +00:00
Christoph Kords 8c849d62ee small corrections for how to treat the new deltaState in FPI and euler integration; all integrators successfully tested with j2 2012-05-18 13:00:15 +00:00
Christoph Kords abbae76c51 instantaneous jumps in the state by constitutive_deltaState are now incorporated for all state integrators. still they (should) not influence the result, since all constitutive laws simply return zero for the deltaState 2012-05-17 15:25:21 +00:00
Christoph Kords a54439e3b5 dotState does not have to be reset to zero. this is a remnant from older versions when the dotState for the nonlocal model used to be updated by the neighboring integration point 2012-05-16 15:35:14 +00:00
Franz Roters 7ee368f324 check whether there is any constitutive output 2012-05-11 07:38:20 +00:00
Christoph Kords 91a70b0fb3 before turning terminally ill report at which g,i,e crystallite did not converge 2012-03-30 13:16:45 +00:00
Pratheek Shanthraj 131c9ac93e dPdF calculations made consistent with constitutive_TandItsTangent 2012-03-21 15:00:36 +00:00
Franz Roters 8a2f2c5a95 stress iteration loop now uses generalized elasticity by calling TandItsTangent
the anlalytical tangent calculation should now be adopted to also use TandItsTangent
2012-03-21 10:57:27 +00:00
Pratheek Shanthraj c2f5cebacb simplified analytic jacobian calculation. removed Lpfrac, time_sensitive. introduced rate_sensitivity flag when calling crystallite_stressAndItsTangent that is currently set to .false. and is to be set according to which dPdF the FE solver is asking for 2012-03-14 13:56:50 +00:00
Franz Roters c9ed989dad replaced keyword constitution with plasticity in preparation of upcomming generalized elasticity 2012-03-12 14:09:37 +00:00
Martin Diehl bd9667bd4b added new, flexible debugging scheme.
now all modules have their own debug specification.
compiles and runs, I hope nothing is broken
did a lot of polishing
2012-03-08 20:25:28 +00:00
Pratheek Shanthraj 17e9698659 added time_sensitive flag to ignore or add time sensitive component to analytic jacobian (should be close to perturbed jacobian when ignored)
now uses sub_dt for analytic jacobian calculations
bug fixes
2012-03-01 19:42:43 +00:00
Nan Jia 211f66a728 added elastic stiffness matrix as crystallite output 2012-03-01 13:06:09 +00:00
Pratheek Shanthraj 040e244993 Added stress-order terms to analytic stiffness 2012-02-27 17:40:28 +00:00
Pratheek Shanthraj 99d6dcecb5 fixed bug in calculation of analytic jacobian (should work much better now). parallelized analytic jacobian calculation loop 2012-02-24 14:07:46 +00:00
Pratheek Shanthraj 28d654d61e forgot to remove some print statements in previous commit 2012-02-22 20:22:54 +00:00
Pratheek Shanthraj b9a82156c9 crystallite.f90: can now calculate analytic jacobian by setting analyticJaco = 1 in numerics.config
math.f90: added math_mul3333xx3333…

numerics.f90: to read in analyticJaco and Lp_frac
2012-02-22 20:11:09 +00:00
Martin Diehl d68a3d1869 added LF=UNIX to a bunch of files 2012-02-22 13:30:00 +00:00
Martin Diehl d8ffc29236 again: adding pInt, removing redundant use statments, chang in dble to real(,pReal) 2012-02-21 16:31:37 +00:00
Martin Diehl 6c0f9d163b polishing: removed variable names like 'unit' and 'data' that are keywords of fortran and ensured that integer and real precision matches independent of machine standard.
removed cut_off parameter for damask_spectral
removed outpot of derived divergence measures and added RMS output in brackets
added comments and options to the makefile
2012-02-15 18:58:38 +00:00
Christoph Kords c786336af3 reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore.
all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 17:41:27 +00:00
Krishna Komerla 94100e8d8e missing line break 2012-02-13 15:21:03 +00:00
Martin Diehl 156ec4582a polishing, adding _pInt etc. where applicable
post_results now handels zero increment different (like FEM, it is always there even if it is not counted)
2012-02-13 14:18:07 +00:00
Philip Eisenlohr fa32a00d56 changed symmetryID initialization to integer (instead of float) value 2012-02-10 17:46:43 +00:00
Christoph Kords e7d407c2f6 crystallite_Fp has to be initialized in crystallite_init, cause it is used by constitutive_microstructure 2012-02-03 14:52:09 +00:00
Martin Diehl c5128e94eb some f2008 standard related correction i didn't check in last time 2012-02-01 20:20:05 +00:00
Martin Diehl 800e291240 made code standard conform to Fortran 2008 (ignoring warning concerning comments beyond character 132). Basically, changing "x" format specifier to "Nx" ("1x") plus removing $ format specifier
added compiler switches for gfortran and ifort to check for standard conformity
old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
2012-01-31 19:18:55 +00:00
Martin Diehl 80583fefb5 added compilation_info.f90, to store compilation date,time and compiler info in each file
added #include statement at each init() routine
2012-01-31 14:54:49 +00:00
Christoph Kords 1330576a01 added new math function "math_deviatoric33" which returns the deviatoric part of a 3x3 tensor
renamed some math functions, so that we have a universal naming scheme: for matrix multiplications use an "x" (e.g. math_mul33x3); don't use the "x" to describe the shape of the tensor that the function is applied to (e.g. math_invert33 instead of math_invert3x3)
2012-01-26 13:50:00 +00:00
Christoph Kords 6fec57bbd7 replaced variable fraction by "timefraction" 2012-01-26 12:48:59 +00:00
Christoph Kords 4980f57fd5 added total Green-Lagrange strain to crystallite outputs 2012-01-20 10:25:35 +00:00
Christoph Kords 8739b9522e dislocation stress does not add to stress field anymore, but is only available as constitutive output for purposes of postprocessing. instead, we now use a backstress term (which is added to the resolved shear stress) that depends on the gradient of excess density on the same slip system. 2012-01-17 10:26:57 +00:00
Philip Eisenlohr a7d9d711f6 edited lines exceeding 132 chars (before any comment started) 2012-01-11 16:56:35 +00:00
Martin Diehl 5ebeb96e85 made DAMASK to work with gfortran:
-removed to long lines
-restructured f2py modules and merged make_DAMASK2Python into setup processing
-setup_code.py now sets library path in makefile and asks for compile switches for spectral code
-substituted \ in format strings with $

restructured DAMASK_spectral:
-more logical output and structure of code
-better input for spectral debug parameters
2011-12-06 16:58:17 +00:00
Christoph Kords 9d1bc584d0 corrected stress integration scheme: now use norm(Lpresiduum) as a target function for Armijo's rule instead of whole tensor Lp; also corrected the guess for the improvement in Lp 2011-11-04 12:57:12 +00:00
Christoph Kords ca3d21a3b6 Depending on which state integrator one uses for the stiffness calculation, the initial state has to be chosen accordingly: e.g. for FPI choose last converged state, but for explicit RK choose converged state from start of increment (in case of explicit euler no state integration at all, but only stress integration). For this purpose we also need to remember "Fe" which now follows the cutbacking procedure as it is used for "Fp". 2011-11-04 12:44:50 +00:00
Martin Diehl c35ea33f8e did a lot of polishing:
- removed unnecessary "return" before end of subroutine or function:
- changed undetermined array length (:) to (1:3)

To prevent problems with some code analysing tools:
- "3D oneliner loops" (with ";) only for "do" and "enddo" at the same time
- removed line continuation in OMP statements

made the makefile more flexible, removed heap-arrays switch
2011-09-13 15:54:06 +00:00
Christoph Kords b300cc7faa ip volume is now based on the determinant of F. "mesh_ipVolume" represents the initial volume and is multiplied with det(F) wherever the current volume is needed. Since this works for all solver types, the "volume" output in crystallite is now also correct for spectral method and abaqus. 2011-08-19 11:18:56 +00:00
Christoph Kords 1ffb59a96a Calculation of current ip volumes now working. Crystallite output also reflects current grain volume, not reference volume. However, this is only available for Marc. Abaqus and spectral method still return the reference ip volume. The ip coordinates though are correctly updated for all solver types. 2011-08-10 16:37:17 +00:00
Christoph Kords ef7405fe21 Stress integration now uses Armijo rule to find an appropriate correction of Lp: decreases step in case that residuum does not improve significantly, accelerates as usual in case of good convergence. This turned out to improve convergence behavior. 2011-08-02 11:29:08 +00:00
Martin Diehl 75c67f53f7 introduced alternative location for material configuration.
If present, the >>>JOB.materialConfig<<< file takes precedence over the standard >>>material.config<<<
2011-08-02 10:14:16 +00:00
Martin Diehl 564eb5009f shape mismatch in crystallite, invalid names for variables(pos, size) in homogenization corrected. polishing of DAMASK_spectral_interface and makefile 2011-08-01 18:10:55 +00:00
Philip Eisenlohr a26d9c844b max size of crystallite result is now based on actual use within the mesh, not just picking the largest chunk from the material.config file... 2011-06-08 09:16:48 +00:00
Philip Eisenlohr 8041587a72 changed internal debug verbosity in accord with debug.config listing. 2011-06-06 15:27:35 +00:00
Philip Eisenlohr e5a2d829b0 new substructure with 'include' and 'config' directories
renaming of mpie_... to DAMASK for main usersubroutines

extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 16:38:45 +00:00
Philip Eisenlohr affd383ef8 simplified disorientation calculation. performed FEM check that "grainrotation" reflects the *active* rotation from the starting orientation to the current one with respect to the lab coord system (as expected). 2011-04-14 19:09:44 +00:00
Christoph Kords 5814262f55 moved some write statements within stateIntegrationEuler 2011-04-14 09:35:56 +00:00
Philip Eisenlohr 349f022100 reinstantiated calculation of grainrotation (still needs check for correctness, i.e. active or passive rotation output) 2011-04-13 16:08:52 +00:00
Franz Roters 7d84a0911e removed unused variables 2011-04-13 14:16:22 +00:00
Franz Roters c1b8391110 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
Franz Roters fcdb805225 added copyright text to all f90 (free) format files 2011-04-04 14:09:54 +00:00
Christoph Kords 790dbed1e4 * removed last remnants of old debugger
* replaced "dble" intrinsic function by "real" with pReal kind in constitutive_nonlocal.f90
* removed useless line breaks in output of state in CPFEM.f90
2011-04-04 08:34:52 +00:00
Christoph Kords 314ca3fe7f Internal stress calculation in nonlocal model: instead of integration of excess gradients (->Bayley) we now sum up contributions from adjacent superdislocations within a certain radius R. When periodicity is used, also periodic images are considered in stress evaluation. 2011-03-29 07:34:33 +00:00
Christoph Kords 3d51dd36fa * Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization.
* Also added some more openmp directives to increase percentage of parallelized code.

* "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 07:27:19 +00:00
Nan Jia 7be2edb10e added "texture
" as possible crystallite output => reports ID for later discrimination...
2011-03-22 13:40:27 +00:00
Christoph Kords 462eda6736 split parallel region in integrateStateFPI into two 2011-03-21 14:30:10 +00:00
Christoph Kords 5ee73dee72 age dotState before resetting it to zero, otherwise the statedamping does not work. 2011-03-21 13:06:11 +00:00
Christoph Kords fc6f2ae68f No need to call constitutive_microstructure at the beginning of each crystallite step, since it's already been done at the end of the previous step. Just do it once after initialization to start with correct values for the dependent state variables. 2011-03-21 10:35:42 +00:00
Christoph Kords 11138e3ee2 debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output)
0 : only version infos and all from "hypela2"/"umat"
1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info
2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines
3 : basic outputs from "homogenization.f90"
4 : extensive outputs from "homogenization.f90"
5 : basic outputs from "crystallite.f90"
6 : extensive outputs from "crystallite.f90"
7 : basic outputs from the constitutive files 
8 : extensive outputs from the constitutive files

If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 10:31:17 +00:00
Christoph Kords 235266b169 openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:

DON'T use implicit array subscripts:
example:    real, dimension(3,3) :: A,B
                  A(:,2) = B(:,1)               <--- DON'T USE
                  A(1:3,2) = B(1:3,1)       <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to  prevent memory leaks.

Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)

Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 10:46:17 +00:00
Franz Roters 97a0146672 deactivated one debug statement at the end of crystallite_updateState(g,i,e) as it leads to division by zero if constitutive_state(g,i,e)%p(1:mySize) contains zero values
statement should be changed to check for zero values
2011-03-11 10:05:30 +00:00
Christoph Kords ad4706673b * removed calculations for dipole formation/dissociation by stress change, since it is not used anyways; also removed associated constitutive outputs from material.config
* removed input variables in constitutive_collectDotState and constitutive_postResults that are not needed anymore (because of recent changes in constitutive_nonlocal)
2011-02-25 09:53:20 +00:00
Christoph Kords 2f503f5cdb added "Lp" as crystallite output 2011-02-25 08:15:26 +00:00
Christoph Kords 96d3682d5e * new global integer variable "numerics_integrationMode" (1 indicating integration of central solution, 2 indicating integration of perturbed state)
* combined "integrator" and "integratorStiffness" in new global variable "numerics_integrator"
2011-02-23 08:29:51 +00:00
Christoph Kords 466ced911e * check convergence for nonlocals also in stiffness calculation mode 2011-02-09 08:39:07 +00:00
Philip Eisenlohr c00a42a9a4 fixed last remaining tensor outputs to their transposed versions 2011-01-27 14:29:06 +00:00
Philip Eisenlohr 6ac06af517 sorry, forgot to alter the most important part: post_results..! eventually, the t16 has defgrads and friends in correct format: du_i/dx_j is listed as linear array (1,1),(1,2),(1,3),(2,1),... 2011-01-24 16:23:37 +00:00
Philip Eisenlohr 4ee40df5ba transposed writing into t16 file (and screen/debug) did not work with just stating array(1:3,:)...
fixed by using math_transpose3x3 (and similar) instead.
2011-01-24 15:02:19 +00:00
Philip Eisenlohr 794aeb253b crystallite and CPFEM now print/output tensors in ij notation (used to be, particularly in the t16, ji, i.e. transposed...)
math reports random seed used for rnd() generation
2011-01-20 19:25:45 +00:00
Christoph Kords b9b226548c * enclose wall time measurement for LpAndItsTangent and count of leapfrogbreaks by CRITICAL construct
* better use SINGLE (having an implicit barrier at the end) instead of MASTER construct
* deleted all explicit BARRIERs after do loops since parallel loop construct implies barrier at the end
2010-11-19 17:29:29 +00:00
Christoph Kords 4f267f4375 parallelization now works properly (not yet tested extensively though):
* had to add some BARRIER constructs
* only the master thread is allowed to increase the state counter

yet parallelization seems not to give a significant decrease in calculation time with nonlocal model (because of too many CRITICAL statements?)
2010-11-11 16:16:05 +00:00
Christoph Kords 14594dc9e2 * OpenMP does not like unbounded array subscripts in function calls
* some write statements were still not enclosed by CRITICAL construct, some needed a MASTER construct
2010-11-11 13:14:53 +00:00
Christoph Kords 405d5529e7 * checked and corrected parallelization of code. compiles now successfully, but simply aborts computation with first parallel directive without any comment :-(((
* also put a call to constitutive_microstructure at the start of each crystallite_integration subroutine like it was before. need that for nonlocal model in case of crystallite cutback
2010-11-03 17:22:48 +00:00
Philip Eisenlohr 0dd99cb965 lattice: (re)introduced _symmetryType function to replace unsafe lookup array
numerics: polishing

mpie_cpfem_marc: polishing

..powerlaw: aware of symmetryType function

crystallite: aware of symmetryType function, smaller leapfrog acceleration

IO: new warning 101

CPFEM: range of odd stress is now -1e15...+1e15, H_sym is used for stiffness
2010-11-03 14:58:11 +00:00
Christoph Kords 4c20daa00d state loop count was wrong for adaptive euler integration 2010-10-28 12:22:17 +00:00
Christoph Kords 9320d48305 in RKCK45 state integration: dotState was not saved in last Runge-Kutta step 2010-10-27 08:48:04 +00:00
Christoph Kords f5f3ef5ecc * have to reset dotState to zero before call to collectDotState (only important for nonlocal calculation)
* in Fixed Point Iteration: update dependent states after state preguess was missing; on the other hand, the first call to constitutive_microstructure was obsolete
2010-10-26 14:04:33 +00:00
Christoph Kords 366d52bd71 * former "relevantRho" and "relevantResistance" is renamed to "atol_rho" and "atol_resistance" and now used as an absolute tolerance for the state residuum. before it was used rather as significant state, so whenever the state dropped below that value it was considered converged. (In dislotwin and titanmod constitutive law there is only one value atol_rho which is used for all the states, though the state array consists not only of densities. We need further parameters here!)
* somewhat simplified convergence check for adaptive euler and runge-kutta
2010-10-26 13:16:37 +00:00
Christoph Kords e49de75fe3 stiffness calculation now only needs a single function call to the respective integrator method instead of one call per grain (which seems to heavily slow down the computation). also no special treatment for non-local material points anymore. 2010-10-15 14:57:13 +00:00
Christoph Kords fffe731447 * had to correct nonlocal slip system compatibility and flux calculation. last update gave wrong results. 2010-10-15 13:19:26 +00:00
Christoph Kords 724960686f * in nonlocal model: dislocation flux now with valid description also for large angle grain boundaries; transfer of dislocations from one slip system to the other according to new variable "constitutive_nonlocal_compatibility" which depends on the angle between slip plane normals and slip directions and is updated once per cycle in function "crystallite_orientations"
* reactivated debugging functionality for "non-standard" integration methods
2010-10-12 13:08:54 +00:00
Christoph Kords fce7590c17 * now able to choose method for state integration (integrator and integratorStiffness in numerics.config); standard is "Fixed Point Iteration", which is basically the same as before; others available are "Explicit Euler", "AdaptiveEuler", "Classical Runge-Kutta" and "Runge-Kutta Cash-Karp"
* now remembering stiffness similar to how we do it for Lp etc.; avoids undefined stiffness values for nonconverged stiffness calculation

* non-local stuff:
   * changed non-local kinetics (Gilman2002)
   * enforce zero shearrate for overall carrrier density below relevant density
   * enforce zero density for those states that become negative and were below relevant density before
   * dislocation velocity is not limited by V^(1/3) / dt anymore
2010-10-01 12:18:49 +00:00
Philip Eisenlohr b259fbd9c6 1) added distribution of leapfrog breaks
2) lattice_symmetryType is now a function (former lookup array was buggy)
3) stricter check of state var values (>0!) and memory deallocation done
2010-09-30 07:31:53 +00:00
Philip Eisenlohr 83a921eec2 crystallite: polishing
rest: added "$ID" and line ending settings...
2010-09-23 08:05:50 +00:00
Alankar Alankar 7548858ffa Some useful changes in damper for quicker convergence. 2010-09-22 08:54:36 +00:00
Alankar Alankar 18c86ca0b1 Updated corresponding files for titanmod constitutive 2010-09-13 09:29:03 +00:00
Philip Eisenlohr 9a20f742ea leaner memory requirement to store states and their rates when calculating the crystallite stiffness 2010-09-13 09:13:25 +00:00
Philip Eisenlohr a3c92061f9 1) terminallyIll was reset before FE did cutback --> useless extra calculations of same problem over and over...
2) local stiffness calculation is now standard for non-local grains
3) stressLoopDistribution discriminates between (a) central solution and (b) stiffness perturbation
4) debugger is switched on as standard... (but verboseDebugger not!)
2010-09-06 16:06:41 +00:00
Christoph Kords 05568ef73b calculation of state damper was erroneous for use with nonlocal and other constitution at the same time 2010-08-26 12:54:31 +00:00
Christoph Kords 197d7ea8d9 rearranged output statements in crystallite init for better readability in output file 2010-08-26 09:52:40 +00:00
Philip Eisenlohr c352146fe6 exchanged forall (warning causers) to nested do loops
deleted (currently unused) symmetrization of H tensor in CPFEM.f90 --> Denny pls advise?
2010-08-19 21:35:38 +00:00
Philip Eisenlohr 298cecbfec corrected syntax errors (long lines, line continuation by \) and logical mistake in mpie_cpfem_marc / abq_std which went unnoticed in ifort. Using SunStudio f90 surfaced those... 2010-08-03 23:47:00 +00:00
Christoph Kords 6d874e2c1f nonlocal stiffness calculation:
rather perturb all components at once (and optionally decrease the frequency of the Jacobian update with the iJaco parameter) than perturbing only a single component per cycle
2010-06-17 06:32:56 +00:00
Christoph Kords 3ce1882d29 when calculating dislocation stress at grain boundaries, densities are now extrapolated similarly to like it was already done at free surfaces 2010-06-07 16:01:37 +00:00
Denny Tjahjanto 9932c90c73 restoring the crystallite.f90, IO.f90 and material.f90 to the version 575. the version 576 of these files contain some uncleared debugging statements. 2010-05-26 16:34:44 +00:00
Denny Tjahjanto d114a600c3 fixed some errors in QuaternionToEuler, RToQuaternion to get the correct texture representation in the output. 2010-05-26 15:52:54 +00:00
Christoph Kords 51da3b6242 sorry, in rev 568 some variables were not declared in crystallite_postResults 2010-05-18 12:36:09 +00:00
Christoph Kords d96780967b added some output variables in crystallite: F, Fe, Fp, Ee, P, S 2010-05-18 07:57:13 +00:00
Claudio Zambaldi 15328e51cf Like this Euler angles AND grain rotation should be OK. 2010-05-11 15:06:21 +00:00
Claudio Zambaldi 2405a51042 crystallite:
- grainrotation calculation now is done with symmetryID 0, i.e. without symmetry reduction since we want the absolute misorientation.
- While math has everything in radians, post results eulerangles and axisangle are given in degrees.
And: grain rotation seems OK after the previous changes in math module.
2010-05-07 12:01:46 +00:00