Pratheek Shanthraj
60fec0e8ec
added code structure for non-schmid mechanics. work in progress…
2013-01-21 23:11:16 +00:00
Pratheek Shanthraj
fd94c786f0
moved stiffness tensor calculation to lattice
...
introduced 'isotropic' and 'orthorhombic' lattice types to use corresponding symmetries in stiffness tensor. intended to be used with non-crystal plasticity models (j2, constitutive_none with isotropic, cubic or orthotropic elasticity).
2013-01-21 21:57:26 +00:00
Martin Diehl
093cf92338
remove omp statements during initialization, "line" for reading in from material.config now has a default (empty) value to prevent conditional jump depend on this value
2013-01-08 22:11:59 +00:00
Christoph Kords
f14fd45ce1
new material parameter "egdejog": fraction of annihilated screw dipoles that forms edge jogs
2012-12-23 12:56:15 +00:00
Christoph Kords
03a88d4798
fixed timesyncing for special case of ip that synchronizes its time step, but does not have a neighbor
2012-12-11 13:38:36 +00:00
Christoph Kords
37028455e9
always use the current state for leaving flux calculation when no neighbor is present
2012-12-09 12:24:32 +00:00
Christoph Kords
149c747688
use non-corrected densities for rate check in dotState
2012-12-06 17:14:35 +00:00
Christoph Kords
1f5a30d6f0
corrected typo in random multiplication term
2012-12-06 14:04:18 +00:00
Christoph Kords
20f7053ad3
correction of interaction coefficients due to line tension effect only applies to coefficients 3, 4 and 5
2012-12-04 18:23:46 +00:00
Christoph Kords
9eb89b0050
made random multiplication switchable via material.config
2012-12-03 12:59:38 +00:00
Christoph Kords
62ddbf26df
slightly changed the multiplication term in the nonlocal model for the starvation case
2012-11-29 18:50:25 +00:00
Christoph Kords
f92d34dd22
removed some unused variables
2012-11-29 18:44:00 +00:00
Christoph Kords
29618df550
annihilate only part of the screw dipoles (specified by minimumDipoleHeight), not all; moved annihilation of screws from deltaState back to dotState
2012-11-28 12:09:48 +00:00
Christoph Kords
e10000a338
Introduced an alternative cutback scheme for the nonlocal model, that allows to keep the results of most of the ips that immediately converged, and only do cutbacks in regions where some ips are in big trouble. Only works for nonlocal model and state integrator 2.
2012-11-27 18:36:55 +00:00
Christoph Kords
4195d53d11
message of last commit was incomplete: moved annihilation of screw dipoles from dotstate to deltaState, since it is not a rate
2012-11-17 13:54:22 +00:00
Christoph Kords
467c186f0f
annihilation of screws
2012-11-17 13:50:20 +00:00
Philip Eisenlohr
d9a98417ca
switched element library to geomType based.
...
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-15 22:45:20 +00:00
Christoph Kords
5b6baa7c0d
introduced distinction between ip coordinates and cell center coordinates; the former can be globally calculated by subroutine mesh_build_ipCoordinates, the latter locally by the function mesh_cellCenterCoordinates; renamed mesh_ipCenterOfGravity to mesh_ipCordinates
2012-11-06 14:37:13 +00:00
Christoph Kords
55dc286be2
corrected limit for upper stable dipole distance; fixed a bug in the postResults where division by zero might happen
2012-10-29 13:02:01 +00:00
Christoph Kords
f666f8dcf3
added possibility to scale the plastic shearrate by the ratio of mobile to total density; keyword in material.config is "deadZone"
2012-10-29 12:49:28 +00:00
Christoph Kords
0980920b66
In crystallite: for state integrators 2 and 3 the deltaState always has to be done at the beginning of the integration, not at the end; otherwise the stiffness calculation can be completely wrong, when the state is changed after the stress integration for the central solution.
...
Also changed some debugging levels in crystallite and mainly in constitutive_nonlocal
2012-10-22 07:59:35 +00:00
Christoph Kords
3ecaa9e371
modified multiplication term in order to mimic a discrete distribution of dislocation sources; namely, at high resolution, when there is (on average) less than one source per integration point, a random generator decides whether there is a source in the finite volume or not; if there is one, then the multiplication turns independent of the density and depends only on the velocity/volume times a scalar factor; recovers density*velocity/lambda for large finite volumes
2012-10-19 11:40:17 +00:00
Christoph Kords
e4054c116d
fixed problem with gnu compiler: allocation of variables in constitutive_nonlocal_stateInit was not safe when not using any nonlocal constitution
...
put header of debugging output in constitutive_init at the start of the function in order to make debugging easier
2012-10-09 12:34:57 +00:00
Christoph Kords
a84e0529c3
make correction of hardening coefficients thread safe
2012-10-05 16:05:51 +00:00
Christoph Kords
40a2e652e7
introduced material parameter "linetension", which indicates how strong the effect of the line tension on the hardening coefficients is
2012-10-05 14:42:41 +00:00
Christoph Kords
7cc6108a04
hardening coefficients for fcc are density dependent (line tension effect, Devincre, Kubin, Hoc; 2006; Physical analyses of crystal plasticity by DD simulations)
...
fixed bug with thermal annihilation producing negative density in case of very small dipole density and high climb velocity
2012-10-04 18:08:40 +00:00
Christoph Kords
bce8012c89
random distribution of initial dislocation density now really independent of meshsize
2012-10-02 15:26:58 +00:00
Christoph Kords
91b7883c2a
random distribution of initial dislocation density now independent of mesh size
2012-10-02 13:35:34 +00:00
Christoph Kords
1502a71f0c
added possibility to start with an initial random distribution of dislocation segments with specific overall density
2012-10-02 12:57:24 +00:00
Christoph Kords
29023cea3c
minor correction of debugging output
2012-09-05 11:19:46 +00:00
Christoph Kords
f153866030
introduced factor to control edge contribution to multiplication;
...
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
Christoph Kords
d80b45c1d9
added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
...
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
Christoph Kords
f3e7b3cec8
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:31 +00:00
Christoph Kords
9214da4465
added missing labels to list of available outputs
2012-08-27 12:41:57 +00:00
Christoph Kords
3cd5fa90e8
corrected dislocation multiplication term for special case of zero density
2012-08-24 11:36:46 +00:00
Christoph Kords
4f67d04c69
new parameter "significantRho" for nonlocal constitutive law ; density below this value will hardly contribute to dislocation glide or any dislocation reaction ; old parameter "absoluteToleranceRho" is now used only for its initial purpose, namely the absolute tolerance in the state integration
2012-08-23 05:48:21 +00:00
Christoph Kords
222aed9f60
derivative of velocity with respect to resolved stress was flawed; now much better convergence of stress integration for nonlocal constitutive law
2012-08-21 14:40:01 +00:00
Christoph Kords
b2aacf9ca4
rates in constitutive_results are taken directly from last converged step and not calculated again; added output of rates for annihilation of screws and deposition of edge jogs on collinear system
2012-08-16 11:03:22 +00:00
Christoph Kords
bd754dbefd
corrected debug output of evolution rates; added possibility to change the safety factor for the CFL flux condition via the material.config file; updated the example material.config due to recent changes in nonlocal constitutive
2012-08-16 09:13:38 +00:00
Christoph Kords
f5e7d576f1
introduced annihilation of screw dipoles; so far no thermal activation, but immediate annihilation; each annihilated screw dipole leaves behind an edge jog of same length as the dipole height on the collinear system
2012-08-14 12:26:20 +00:00
Christoph Kords
a48d180f8c
allow prefactor for self-diffusion to be equal to zero
2012-08-06 09:03:33 +00:00
Christoph Kords
e8df3678aa
added possibility to assign the transmissivity of grain boundaries a fixed value by use of the keyword "grainboundaryTransmissivity" in the material.config; grain boundaries are identified as interfaces between areas of different material_texture
2012-08-03 14:32:49 +00:00
Christoph Kords
15c5131874
corrected formulation of maximum height of screw dislocation dipoles
2012-07-24 14:50:11 +00:00
Christoph Kords
c4c00f04f4
no dipole formation by stress decrease;
...
dipole dissociation rate proportional to "deltaDipoleLimit / oldDipoleLimit", not "deltaDipoleLimit / newDipoleLimit"
2012-07-24 06:57:37 +00:00
Philip Eisenlohr
7c6fc121fd
condensed error reporting for constitutive_XYZ_init
...
removed erroneous check for structure>3
2012-07-17 17:36:24 +00:00
Philip Eisenlohr
4d09ef0648
changed variable name "debug_what" to "debug_level"
2012-07-05 09:54:50 +00:00
Christoph Kords
145d971d7e
added some debug output
2012-05-30 08:05:36 +00:00
Christoph Kords
5cc73a15a9
small correction in debug output
2012-05-30 07:41:22 +00:00
Christoph Kords
20f203f799
allow minimum stable dipole height equal to zero; ensure that maximum stable dipole height is not smaller than the minimum value
2012-05-20 13:57:35 +00:00
Christoph Kords
5b02d4e8eb
dipole dissociation and formation by change in stress as new mechanism in deltaState; had to add dipole height to state variables, which is however updated by deltaState instead of microstructure; alternatively microstructure had to know the current stress state
2012-05-18 14:35:52 +00:00