Commit Graph

140 Commits

Author SHA1 Message Date
Pratheek Shanthraj b54782046d increased size of petsc_options string 2014-10-21 16:25:53 +00:00
Martin Diehl d095c2484d simplified multi processor (MPI) reporting 2014-10-10 13:08:34 +00:00
Pratheek Shanthraj c8929b47d3 only output from the root processor for parallel runs 2014-10-09 20:23:06 +00:00
Martin Diehl baa08d8155 made analytic tangent default for spectral solver
removed possibility to compile without PETSc (a lot of effort for little/no use)
2014-10-01 12:29:12 +00:00
Pratheek Shanthraj 3da023a1ba thermo-mechanical example 2014-09-29 12:40:57 +00:00
Pratheek Shanthraj cc7064d025 changed default petsc_options for FEM and removed unused variables 2014-09-16 10:02:37 +00:00
Philip Eisenlohr 6612603a23 changed naming convention (keeping backward compatibility in numerics.config):
myspectralsolver --> spectral_solver (called "spectralsolver")
myfilter --> spectral_filter (called "spectralfilter")
2014-09-03 19:59:47 +00:00
Martin Diehl 977392cfe7 compiler for spectral solver is now the version provided by petsc (similar to linking)
added option to compile FEM solver with same Makefile
2014-08-24 22:07:53 +00:00
Pratheek Shanthraj 47707f86b6 fixed typo 2014-08-11 21:28:15 +00:00
Pratheek Shanthraj b36b38d7c3 introduced non-zero residual damage to prevent stiffness matrix from being ill-conditioned 2014-08-11 17:13:06 +00:00
Pratheek Shanthraj d594996e7c added mesh dependent characteristic length as a numerical parameter needed for gradient and phase field problems on unstructured meshes 2014-06-24 23:18:07 +00:00
Pratheek Shanthraj 01a0a0d0bb reverted some changes from previous commit 2014-06-06 08:57:24 +00:00
Pratheek Shanthraj 639ca89133 DAMASK (except nonlocal) now sees and interacts with FEM solver 2014-06-06 00:38:29 +00:00
Martin Diehl e62c5fdc05 added consistency check in material.f90: Microstructure index in geometry must not exceed number of sections in material.config
better error messages in case of recursive file input in IO.f90. also supports absolute path now
2014-05-15 09:40:43 +00:00
Martin Diehl 01416b7ab6 set num threads back and forth between abaqus and DAMASK (like marc) 2014-04-29 16:11:13 +00:00
Martin Diehl 84ce6e429a changed handling of non-converged BVP solution: By default, exit if no solution is found to prevent "user errors"
Removed ambiguous "regridMode" keyword which was used to trigger this behavior in favor of  "continueCalculation", Set this to 1 to get back old behavior, e.g. report non-converged increments.
2014-03-31 10:04:11 +00:00
Martin Diehl 4bb5439994 removed copyright from *.f90 and *.f files, will be added using the deployMe script for release/nightly build. Now based on presence of svn:keywords property set (usually "Id"). Similar thing will be done for .py, .sh, and .config files but more involved because they might be executable 2014-03-29 08:20:36 +00:00
Martin Diehl b9722b866c improved error handling when getting number of threads 2014-02-28 10:30:07 +00:00
Martin Diehl bc4cc20c55 slightly polished makefile and numerics, recompile fftw with icc; still not running with ifort 14.01 2014-02-06 10:41:34 +00:00
Martin Diehl 7885ebaf8f added 'reset' flag for recursive function IO_read, need to reset stack when stopping exectution (will be used by constitutive and homogenization) 2013-12-11 16:49:20 +00:00
Martin Diehl dc95c82d4a removed temperature integration and corresponding data structures and debugging options
temperature is stored in crystallite, but homogeneous on one IP (not an component (grain) quantity and an input value parsed in by the BVP solver.
introduced heat, a component (grain) quantity which is homogenized before returned to the heat transfer solver.
went ahead with removal of dummy functions in homogenization and constitutive, this time mainly reduced function signatures to reflect actually needed quantities.
2013-10-16 13:04:59 +00:00
Philip Eisenlohr a2169e338f fixed type-casting problems (mainly with Lib_VTK_IO) 2013-09-26 17:21:46 +00:00
Martin Diehl cb16b30409 set output order of spectral parameters to more reasonable one 2013-09-17 09:19:16 +00:00
Martin Diehl 7f3c24e1f1 fixed some buggy last minute changes in the last commit 2013-08-08 09:13:29 +00:00
Martin Diehl ac92b90e0b fixed al and pol solver, now checking for div(p) = curl(f) = 0 2013-08-07 17:20:05 +00:00
Martin Diehl 2dc985f558 set tolerances to useful values and renamed them.
allowed "keyword = value" in numerics.config (simply removing "=" from line)
2013-07-31 15:03:38 +00:00
Martin Diehl 81531097f1 changes on convergence tolerances of AL and Polarisation, switched back to immediate correction of stress bc but only when last two average stresses are close to each other (cosine decay) 2013-07-30 15:32:55 +00:00
Philip Eisenlohr 98528f9a89 added possibility for multi-level inclusion of files in *.config and loadcase files.
include subfiles by stating

{path/to/include}
2013-06-26 19:19:00 +00:00
Pratheek Shanthraj 1c25403b5b changed default values of AL spectral solver tolerances. should've been done along with commit 2254. 2013-06-12 10:06:04 +00:00
Martin Diehl c7ba8a2a9b introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working 2013-05-17 17:52:46 +00:00
Martin Diehl 8b2d9d8155 further improvements on implementing the plain mode 2013-04-16 17:07:27 +00:00
Martin Diehl ddcc795461 allowed arbitrary grid (formerly know as resolution), i.e. any integer>1 in each dimension is possible.
removed square root correction for divergence (doesn't make sense)
fixed FFT debug of spectral solver
2013-04-10 10:19:16 +00:00
Christoph Kords 965ab38217 corrected error bounds for spectral parameter "maxCutback" 2013-03-28 16:04:47 +00:00
Martin Diehl 7f37f55904 added missing line continuation in numerics and explicit private statements in the other files 2013-03-28 10:37:00 +00:00
Martin Diehl d2ae06015a moved "Random is random" to output of random seed, cleaned up a little 2013-03-28 10:02:11 +00:00
Martin Diehl 15b6242585 set more appropriate default values for spectral solver tolerances (abs stress BC was at huge()) 2013-03-26 16:36:52 +00:00
Martin Diehl e6f6c22a30 polished Abaqus Standard, changed inclusion of OMP functionality from "spectral style" (include) to "marc style" (use) to prevent explicit from crashing 2013-03-25 18:25:15 +00:00
Franz Roters 02f092492e updated copyright header 2013-03-22 17:35:05 +00:00
Martin Diehl dd06d07e1c set default number of iteration for spectral solver to 250 instead of 40, abaqus doxygen now does the correct inclusion (everything appeared twice before) 2013-03-14 23:10:02 +00:00
Martin Diehl 1779510dda remove some unused variables, set default value for divergence calculation to 1.e-5 and made calculation independent of dim and res 2013-03-12 18:48:28 +00:00
Pratheek Shanthraj 0209a1d5a7 restructured AL solver to resemble polarization scheme and introduced alpha and beta parameters in numerics to determine what kind of solution you want. alpha = beta = 1 results in the AL scheme. alpha = beta = 2 results in the accelerated scheme. safe values are anything in between. changed the solver to use stress calculations on the campatible field which seems to result in faster convergence. 2013-02-28 17:35:02 +00:00
Martin Diehl 59da88460e preparation for introduction of plain mode and restructuring of calc modes for CPFEM_general 2013-02-27 20:41:14 +00:00
Pratheek Shanthraj 07ff1f7c93 reporting current time for most module inits 2013-02-25 16:34:59 +00:00
Martin Diehl a98be4e0cf IO_error and IO_warning crashed for string of zero length (or only containing whitespaces), fixed now.
Also added BEGIN and END statement to numerics in case of non-presen DAMASK_NUM_THREADS, would prevent this error and is better for debugging
2013-02-20 21:56:59 +00:00
Martin Diehl c7c81a5ab5 removed unused variables and declared external functions as external 2013-02-11 09:44:17 +00:00
Martin Diehl e9f351c69b forgot to commit 2013-02-08 15:56:58 +00:00
Martin Diehl c6a79d2b3d divergence_correction for basic solver variants has now 3 possibilities:
0: uncorrected, slope per sidelength (physical dimension) e = res/dim
1: corrected by sidelength, slope per unitlength          e = res/1
2: corrected such that distance between FPs               e = 1

alway regarding the medium length of x,y,z direction
2013-01-16 10:40:53 +00:00
Martin Diehl 0d5e91ac87 corrected reporting of basic PETSc variant and unified reporting of all spectral solvers
improved warning and error in IO, now able to report correctly elements up to 9 digits
2013-01-09 22:19:32 +00:00
Martin Diehl 738f363263 corrected small issues with PETSc debugging 2013-01-03 16:17:23 +00:00
Martin Diehl 5c0c7121e7 made PETSc silent by removing -snes_view from default options.
introduced PETSc option for debugging that introduces some debugging options into the petsc options and move PETSc initialization from numerics to DAMASK_spectral_utilities
2012-12-15 18:07:49 +00:00