34de2e301b
DEBUGGING VERSION for calculation of Divergence (various methods implemented). DO NOT USE. Wait for next update coming in a few minutes
2011-08-10 16:02:13 +00:00
bb1ca2330b
added option to enable use of AMD math core library, added comments on the various parameters
2011-08-10 16:00:02 +00:00
31b60b8814
changed debug intensity so that the artificially high stress and stiffness values in collection cycles do not get printed out anymore...
2011-08-03 17:59:31 +00:00
4f1cb3a8af
exchanged forall with nested do loops... Bye, bye smatrix warning, will miss you!!
2011-08-03 17:58:16 +00:00
907965272b
added option to build DAMASK_spectral without openMP (make OPENMP=OFF)
...
fixed bug in bc_temperature assignment that was hitting memory.
Temperature is taken from the first loadcase and evolves from there in an adiabatic fashion for the moment. I.e. T-specifications from later loadcases are ignored...
2011-08-03 17:57:28 +00:00
b5abd6f203
adding new option OPTIMIZATION with values OFF, DEFENSIVE and AGGRESSIVE to makefile. Polishing of makefile and DAMASK_spectral.f90
2011-08-03 07:54:32 +00:00
64435b8a97
loadcase takes 'temperature' (or 'temp') as input. Previously it was hard-wired.
2011-08-02 13:58:28 +00:00
422d6d9c6c
slight correction of debugging output
2011-08-02 12:36:08 +00:00
ef7405fe21
Stress integration now uses Armijo rule to find an appropriate correction of Lp: decreases step in case that residuum does not improve significantly, accelerates as usual in case of good convergence. This turned out to improve convergence behavior.
2011-08-02 11:29:08 +00:00
6f859e99de
* internal stress calculation now considers dead dislocations always at the interface, not at the center of the IP volume; used to merge them together with "normal" dislocations for stress calculation.
...
* dislocation flux is blocked if we encounter a sign change in the resolved shear stress from the central ip to the neighbor
* do not set density to zero if below certain threshold; this creates an artificial sink term
2011-08-02 11:17:45 +00:00
0373fa64e4
have to initialize constitutive_state during constitutive_init, since the first call to constitutive_microstructure (where we already need the state) is done before the cutback scheme starts.
2011-08-02 11:10:41 +00:00
9116a1edcb
tried to find and execute mpie_cpfem_marc.f90. changed to new name DAMASK_...
2011-08-02 11:02:28 +00:00
75c67f53f7
introduced alternative location for material configuration.
...
If present, the >>>JOB.materialConfig<<< file takes precedence over the standard >>>material.config<<<
2011-08-02 10:14:16 +00:00
564eb5009f
shape mismatch in crystallite, invalid names for variables(pos, size) in homogenization corrected. polishing of DAMASK_spectral_interface and makefile
2011-08-01 18:10:55 +00:00
3adb7ab382
corrected makefile, now working again without giving standard values explicitly.
...
did some small modification in order to make it possible to compile with gfortran. Changed NaN=0.0/0.0 to bitwise representation (3 different ways)
2011-08-01 10:11:32 +00:00
06a4ac2565
fixed bug (segmentation fault) occurring for non-renumbered meshes: ipNeighborhood building did use FE IDs of twin nodes to address memory -- dangerous..!
2011-07-31 15:42:59 +00:00
fb121b1435
* boundary condition masking changed
...
* damper initialized with one
* inversion of Mandelized stiffness tensor does not work, have to use plain tensor
* new functions in math that allow for conversion between Mandel and Plain tensors
2011-07-29 15:57:39 +00:00
aa714a3d84
some textconstants were wider than specified in the format string, this might have caused Abaqus to crash due to an illegal memory reference (signal 11)
2011-07-29 14:54:26 +00:00
92d7dcb3f4
added modfiles for Marc/Mentat2010.2
...
Marc/Mentat2010.2 is installed on msuws1 only right now, please test!
simply start metat2010.2 instead of mentat2010
2011-07-28 07:27:39 +00:00
72d20875de
added some switches and variables to the makefile to make it more flexible
...
DAMASK_spectral.f90 is a "debug version" with a number of different criteria to determine divergence. will be removed later on.
2011-07-25 16:30:21 +00:00
a58158fc7c
bug fix related to hash key error when requesting --increments range
2011-07-25 12:53:54 +00:00
8cb8637d41
fixed running with default --range & using --separation options.
2011-07-22 11:59:03 +00:00
105a09f3df
only consider increments actually present in (spectral) result
...
added switch to change from range of positions to range of increments
polished help output
2011-07-21 15:45:41 +00:00
2e9c605571
somehow forgot to move the numerics.config into the config subdir...
2011-07-21 08:40:45 +00:00
e92e5cae53
restarting now works with Abaqus (standard, cannot test explicit due to lack of license)
...
you have to specify the job you are restarting from in the job description (cae), if you prepare your input file by hand this is the first line after *Heading
example: if the first job was using Oldjob.inp the first entry in the job description needs to be Oldjob (without the .inp)
as for Marc restart works only from last converged increment, i.e. ther restart writing should be specified like this:
*retsart, write, frequency=1, overlay
Overlay is not essential but saves a lot of disk space and as stated before you can only restart from the last converged increment anyway
2011-07-18 09:15:20 +00:00
8c65cb9ea6
small output polishing
2011-07-15 12:25:38 +00:00
cb96559d99
mappings should rather be called "sumabs" and "avgabs" than "abssum" and "absavg"
2011-07-15 11:27:47 +00:00
63451f6edf
added "absavg" (=average of the absolute values) to the predefined mappings
2011-07-15 08:07:33 +00:00
09ba92c26e
added and rearranged error messages, polished output and simplified calculation of f depending on fdot or L
...
guessing along former trajectory is now on per default, 'guessreset' and 'dropguessing' switch it off.
2011-07-14 09:37:31 +00:00
56340fd487
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase.
...
changed back to use the compliance of initial linear material behavior.
added counter of non-converged steps
renamed compiler flags in makefile
2011-07-13 16:33:12 +00:00
8153cd50b4
added spectral numeric parameters to numerics.config, changed values for spectral numeric parameters in numerics.f90 to more suitable values for new method for determination of divergence in Fourier space
2011-07-11 14:28:56 +00:00
a08eaecf4e
polishing (names of variables, spaces, comments etc.)
...
renamed mpie to DAMASK in IO.f90 error message
2011-07-07 15:27:35 +00:00
a561ef1cf5
corrected calculation of divergence in Fourier space, removed normalization of normdyad (was useless), now using correct compliance for calculation of stress BC.
2011-07-07 10:03:55 +00:00
18a5841bc5
keyword freq for frequency of output writing was not evaluated when reading loadcase file
2011-07-07 09:18:05 +00:00
e889b69bec
Ability to define loglinear time increments by using 'logincs' or 'logsteps' instead of 'incs' in loadcase file is added.
2011-07-06 13:10:18 +00:00
0add06bdfe
slight polishing of documentation for phenopowerlaw
2011-06-21 17:48:32 +00:00
b252b467e8
moved useful ASCII post processing scripts from my Code repository into the DAMASK post-proc.
2011-06-21 16:25:48 +00:00
daa45306f2
fixed a nasty bug in reading the header of spectral files
...
file type is guessed from extension
script tries to gracefully continue when data is missing but not crucial
ASCII file splitting now has correct increment (not position) in its name: poop_inc123.txt refers to true increment 123 not to position 123 in the result file anymore...
2011-06-21 12:38:58 +00:00
b6b02f6cf9
now reports over all loadcases present in the output file, not just a selected one...
2011-06-15 18:14:05 +00:00
dd11ef3072
added capability to deal with (Marc, spectral) output files that have less than every increment stored.
2011-06-15 17:49:59 +00:00
314adae1bb
spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition.
...
example: ... time 1 incs 100 freq 10 will write output at times 0.0, 0.1, 0.2, ... , i.e., every ten increments only.
2011-06-15 17:48:14 +00:00
3985a98da7
changed default to "no clean". if clean-up required, use '--clean' option!
2011-06-15 16:40:34 +00:00
480021e788
added '--noclean' option
2011-06-14 14:56:10 +00:00
1877026d86
sorry, dangling "endif"...
2011-06-14 14:35:55 +00:00
cc925cadee
changed output/debug-level relation for two statements
2011-06-14 14:08:13 +00:00
bb9e55a46d
forget to delete the original filenames with to many characters
2011-06-14 09:21:02 +00:00
9a212aa5fb
filename might be too long.
2011-06-14 08:17:35 +00:00
4d2f6782e7
removed "error" msg about missing /msc directory. if not present, now silently ignored (together with any requests for Mentat interaction).
2011-06-09 12:52:54 +00:00
d52fb1666e
"step" header is modified to "inc" to be consistent with postResults outputs.
2011-06-09 12:39:08 +00:00
a72a97f0ba
added nodalScalar capability.
...
--ns 'elements' reports the nodal connectivity (list of elements touching a node)
--prefix allows to prefix the output filename
2011-06-08 16:54:46 +00:00
Martin Diehl