1502a71f0c
added possibility to start with an initial random distribution of dislocation segments with specific overall density
2012-10-02 12:57:24 +00:00
0bcb8f59db
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 12:53:25 +00:00
6301787df4
moved the the variable cutBack from FEsolving.f90 (where it was not used at all) to the interface routines to make responsibility of cut back control clear
...
PLEASE RUN setup_code.py IF YOU DO MARC SIMULATIONS, THE INTERFACE HAS CHANGED
2012-10-02 12:46:58 +00:00
c8b7da432c
set debug_level to be protected as it is read-only for other modules
2012-10-02 09:35:39 +00:00
4c7bcb8df9
modified formated integer output and added error number in case maximum number of cutbacks is reached
2012-10-02 09:30:13 +00:00
9fc46b4950
added /echo/ statements
2012-10-02 08:12:53 +00:00
23fd3d6f6e
added svn properties and description
2012-09-28 21:57:57 +00:00
c8044fa9f9
added (long) test running abaqus example without fixed seed to see if it is always successful
2012-09-28 15:21:53 +00:00
d81b10d666
using old test with one run again (no failures with fixed seed)
2012-09-28 15:08:42 +00:00
0a961bef55
made test for spectral packing/unpacking working again, small fixes in the 2 scripts
2012-09-28 14:49:07 +00:00
6d97a92913
further improvements on the conversion, seems to work quite good for the 2D case now
2012-09-28 12:10:10 +00:00
6619717baf
improved the conversion of tables to ang files
2012-09-26 12:20:14 +00:00
b99a846503
new scaling feature in numerics (unitlength) did not scale the reference coordinates in the first place; now this is taken care of in mesh.f90, so scaling should work properly
2012-09-25 16:21:58 +00:00
d0fd3c03c5
forgot to check in; belongs to rev 1762
2012-09-24 16:22:25 +00:00
912277d1ed
substituted the call to the flush subroutine with the intrisic flush(6) function
2012-09-24 12:10:28 +00:00
8336d0705c
new numerics parameter "unitlength" that scales the model size in DAMASK; this enables to use very small models in marc without getting any numerical problems for example with contact which does not seem to work when using very small numbers
2012-09-24 06:13:26 +00:00
b587bffdd5
added some 'protected' statements to variables that shouldn't be changed by other modules
2012-09-22 16:49:41 +00:00
8ed69170c5
corrected wrong warning complaining about FFTW string when DAMASK_NUM_THREADS undefined
2012-09-14 16:39:42 +00:00
5dbbb56460
fixed bug in 2D output format alignment.
2012-09-13 12:28:21 +00:00
77b2eef269
corrected wrong compiler option for gfortran in setup and updated naming scheme
2012-09-13 12:20:00 +00:00
b76fee325b
script to shift (physical) origin of geometry file and/or shift microstructure indices by fixed amount and substitute individual indices by other ones.
2012-09-13 10:12:00 +00:00
66e38606f0
syntax errors in one file terminated the script. now continues with next input...
2012-09-13 10:09:54 +00:00
1c0649e17a
syntax errors in one file terminated the script. now continues with next input...
2012-09-13 10:08:57 +00:00
1cfc467705
added new cut back parameter for spectral solver and instrumented variables for use with doxygen
2012-09-13 09:48:38 +00:00
8078585ce8
removed two left-over debug statements
2012-09-13 08:46:18 +00:00
3d14c5b234
functionality now subsumed into geomCanvas
2012-09-13 07:58:29 +00:00
4263191423
functionality now subsumed into geomCanvas
2012-09-13 07:57:57 +00:00
1fe202fd90
added $ID and line endings.
2012-09-13 07:56:45 +00:00
1585fbe927
improved material.config writer class
...
includes example of usage
should replace material.py, after the tests
have been confirmed to work with it
mat=damask.Material()
m=mat.example_1()
m.write(file='material.config_<descriptive-label>')
2012-09-07 18:25:25 +00:00
b9a2890665
fixed bug in loadcase rotation: when not specifying "deg" the rotation was reset to 0,0,0..!
2012-09-06 14:05:28 +00:00
4f6e0eda32
splitter geom-file un/packing into two separate scripts.
2012-09-05 15:15:11 +00:00
dc55e30cf1
added "startingIncrement" to spectralOut result interpretation
2012-09-05 15:14:36 +00:00
29023cea3c
minor correction of debugging output
2012-09-05 11:19:46 +00:00
330d71864e
fixed bug with stress BC handling
2012-09-05 08:30:15 +00:00
3ed60e3880
Added report of SUCCESSFUL test for Revision 1742
2012-09-05 03:15:32 +00:00
f153866030
introduced factor to control edge contribution to multiplication;
...
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
0c5f9fedc7
Added report of SUCCESSFUL test for Revision 1740
2012-09-04 03:24:22 +00:00
c3375fe60b
Added report of SUCCESSFUL test for Revision 1739
2012-09-03 03:54:38 +00:00
8234e37060
Added report of SUCCESSFUL test for Revision 1738
2012-09-02 03:30:44 +00:00
1eca55a253
Added report of SUCCESSFUL test for Revision 1737
2012-09-01 03:36:58 +00:00
51043ec1af
Added report of SUCCESSFUL test for Revision 1736
2012-08-31 03:24:29 +00:00
22812c9a91
some minor improvement on precision detection: checking only once (in prec and no longer in math and crystallite), added one more 4/8 switch for LAPACK, as there is no single precision FFTW, stopping compilation for spectral method if FLOAT=4
...
new function in IO to print integers without leading zeros, implemented it at some places in the new spectral solver (reporting still needs some serious polishing)
updated preprocessing for documentation to handle precision correctly
2012-08-30 20:26:28 +00:00
b7dc9f9944
renamed spectral_buildElements.py to nodesFromCentroids.py and added first simple version of an ascii table to ang converter
2012-08-30 17:01:46 +00:00
299d9e6bc4
fixed bug in seed initialization that didn't allow to redo calculations that started with a random seed. Now the whole random seed array is set to one value, previously only the first one was reported and the remaining ones were random
...
removed old random function used by halton
2012-08-30 14:58:30 +00:00
d80b45c1d9
added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
...
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
801c0380b6
Added report of SUCCESSFUL test for Revision 1731
2012-08-30 03:25:17 +00:00
19089019a7
improved test (now doing 30 runs with fixed seed) for abaqus and simplified the shell scripts again
2012-08-29 22:17:16 +00:00
8e3b547cbd
changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
...
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
84e3f94424
added flush for easier debugging
2012-08-29 15:23:43 +00:00
d83150be1b
now capturing "terminallyIll" for basic solution, should end in a automatic cutback of time steps for the spectral solver
2012-08-29 05:50:42 +00:00
Christoph Kords