a2169e338f
fixed type-casting problems (mainly with Lib_VTK_IO)
2013-09-26 17:21:46 +00:00
cb16b30409
set output order of spectral parameters to more reasonable one
2013-09-17 09:19:16 +00:00
7f3c24e1f1
fixed some buggy last minute changes in the last commit
2013-08-08 09:13:29 +00:00
ac92b90e0b
fixed al and pol solver, now checking for div(p) = curl(f) = 0
2013-08-07 17:20:05 +00:00
2dc985f558
set tolerances to useful values and renamed them.
...
allowed "keyword = value" in numerics.config (simply removing "=" from line)
2013-07-31 15:03:38 +00:00
81531097f1
changes on convergence tolerances of AL and Polarisation, switched back to immediate correction of stress bc but only when last two average stresses are close to each other (cosine decay)
2013-07-30 15:32:55 +00:00
98528f9a89
added possibility for multi-level inclusion of files in *.config and loadcase files.
...
include subfiles by stating
{path/to/include}
2013-06-26 19:19:00 +00:00
1c25403b5b
changed default values of AL spectral solver tolerances. should've been done along with commit 2254.
2013-06-12 10:06:04 +00:00
c7ba8a2a9b
introduced plain mode (no ping pong) again and added test for MSC.MArc 2012 as prove that its working
2013-05-17 17:52:46 +00:00
8b2d9d8155
further improvements on implementing the plain mode
2013-04-16 17:07:27 +00:00
ddcc795461
allowed arbitrary grid (formerly know as resolution), i.e. any integer>1 in each dimension is possible.
...
removed square root correction for divergence (doesn't make sense)
fixed FFT debug of spectral solver
2013-04-10 10:19:16 +00:00
965ab38217
corrected error bounds for spectral parameter "maxCutback"
2013-03-28 16:04:47 +00:00
7f37f55904
added missing line continuation in numerics and explicit private statements in the other files
2013-03-28 10:37:00 +00:00
d2ae06015a
moved "Random is random" to output of random seed, cleaned up a little
2013-03-28 10:02:11 +00:00
15b6242585
set more appropriate default values for spectral solver tolerances (abs stress BC was at huge())
2013-03-26 16:36:52 +00:00
e6f6c22a30
polished Abaqus Standard, changed inclusion of OMP functionality from "spectral style" (include) to "marc style" (use) to prevent explicit from crashing
2013-03-25 18:25:15 +00:00
02f092492e
updated copyright header
2013-03-22 17:35:05 +00:00
dd06d07e1c
set default number of iteration for spectral solver to 250 instead of 40, abaqus doxygen now does the correct inclusion (everything appeared twice before)
2013-03-14 23:10:02 +00:00
1779510dda
remove some unused variables, set default value for divergence calculation to 1.e-5 and made calculation independent of dim and res
2013-03-12 18:48:28 +00:00
0209a1d5a7
restructured AL solver to resemble polarization scheme and introduced alpha and beta parameters in numerics to determine what kind of solution you want. alpha = beta = 1 results in the AL scheme. alpha = beta = 2 results in the accelerated scheme. safe values are anything in between. changed the solver to use stress calculations on the campatible field which seems to result in faster convergence.
2013-02-28 17:35:02 +00:00
59da88460e
preparation for introduction of plain mode and restructuring of calc modes for CPFEM_general
2013-02-27 20:41:14 +00:00
07ff1f7c93
reporting current time for most module inits
2013-02-25 16:34:59 +00:00
a98be4e0cf
IO_error and IO_warning crashed for string of zero length (or only containing whitespaces), fixed now.
...
Also added BEGIN and END statement to numerics in case of non-presen DAMASK_NUM_THREADS, would prevent this error and is better for debugging
2013-02-20 21:56:59 +00:00
c7c81a5ab5
removed unused variables and declared external functions as external
2013-02-11 09:44:17 +00:00
e9f351c69b
forgot to commit
2013-02-08 15:56:58 +00:00
c6a79d2b3d
divergence_correction for basic solver variants has now 3 possibilities:
...
0: uncorrected, slope per sidelength (physical dimension) e = res/dim
1: corrected by sidelength, slope per unitlength e = res/1
2: corrected such that distance between FPs e = 1
alway regarding the medium length of x,y,z direction
2013-01-16 10:40:53 +00:00
0d5e91ac87
corrected reporting of basic PETSc variant and unified reporting of all spectral solvers
...
improved warning and error in IO, now able to report correctly elements up to 9 digits
2013-01-09 22:19:32 +00:00
738f363263
corrected small issues with PETSc debugging
2013-01-03 16:17:23 +00:00
5c0c7121e7
made PETSc silent by removing -snes_view from default options.
...
introduced PETSc option for debugging that introduces some debugging options into the petsc options and move PETSc initialization from numerics to DAMASK_spectral_utilities
2012-12-15 18:07:49 +00:00
566b680319
made new spectral solver the default (no need for SOLVER=NEW anymore) and added additional warnings switche to be used with gfortran >= 4.6
...
added comments
2012-12-15 16:21:10 +00:00
b1f28ba5e7
made restart working for all solvers and added corresponding test
...
corrected error handling for FFT based function in case of odd numbers etc.
2012-12-14 17:30:22 +00:00
7b87987751
introduced option for regridding to numerics.f90, working as follows:
...
first cut back is tried if material point model oder BVP solver does not converge.
If no regridding is enabled after max cut back, in case of non-converged material point the simulation stops and in case of non-converged BVP solver it continues.
set regridMode to 2 to enable regridding if BVP solver OR materialPoint model do not converge,
set regridMode to 1 to enable regridding if materialPoint model do not converge, non-converged BVP solver will be ignored as in the standard case.
For regridding, the load case need to have a restart freq set.
enabled restarting for Basic PETSc variant
2012-12-14 15:18:04 +00:00
e10000a338
Introduced an alternative cutback scheme for the nonlocal model, that allows to keep the results of most of the ips that immediately converged, and only do cutbacks in regions where some ips are in big trouble. Only works for nonlocal model and state integrator 2.
2012-11-27 18:36:55 +00:00
3ada4897fb
reordered PETSc initialization (now first part done in interface, setting of parameters done in numerics), removed unnecessary includes for PETSc
...
still not running with gfortran, use at own risk!
2012-11-06 16:00:51 +00:00
d5ce49c471
numerics got some protected statements and is now reading in the new keywords for the solver selection in small letters.
...
spectral solver got cut back facilities + improved output to screen
2012-10-02 15:26:56 +00:00
d0fd3c03c5
forgot to check in; belongs to rev 1762
2012-09-24 16:22:25 +00:00
8ed69170c5
corrected wrong warning complaining about FFTW string when DAMASK_NUM_THREADS undefined
2012-09-14 16:39:42 +00:00
1cfc467705
added new cut back parameter for spectral solver and instrumented variables for use with doxygen
2012-09-13 09:48:38 +00:00
8e3b547cbd
changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
...
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
d089c12947
abaqus seems to have similar problems with the openmp lib as marc (use module vs. include file), i hope this fixes the crashes
2012-08-28 19:48:38 +00:00
5e9e8497e6
new solver is now compiling without a PETSc installation, however only the plain basic solver is available then.
...
also removed reporting of PETSc related variables in the case it is not installed/found
2012-08-28 19:19:47 +00:00
c2c31a0a59
added SolverBasicPETSC module to the new FFT solver (solves the basic scheme using PETSc when mysolver = basicpetsc in numerics.config)
...
some bug fixes
2012-08-14 16:58:23 +00:00
d0933dad7b
added filter option to the spectral solver to mitigate spurious oscillations due to gibb's phenomenon. activate by setting myfilter in config file appropriately (currently only 'none' and 'cosine' options coded). more cleaning up of AL code
2012-08-07 17:23:13 +00:00
32f8c9c6ea
moved petsc option string to numerics and added new numerics parameters to config file
2012-08-06 17:27:53 +00:00
7e3a837640
moved calculation and output of geometry related data to mesh.f90, moved output of command line related information to DAMASK_spectral_interface.f90.
...
improved new solver structure (use with make SOLVER=NEW)
2012-08-06 12:43:05 +00:00
e2a2621235
updates for AL version of spectral solver
2012-08-06 08:53:12 +00:00
4ed68bb4ae
next round in modularization
2012-07-25 14:01:39 +00:00
9c0a161ec0
in case of regridding, undeformed configuration is written out correctly. Restart improve by reading in additional data from converged step.
2012-07-24 12:21:41 +00:00
b2fd3e1180
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only.
...
Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver.
Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile.
Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 16:10:21 +00:00
5b7f2e122e
fixed usage of OpenMP function library
2012-06-12 09:44:05 +00:00
Philip Eisenlohr