renamed some parameters, now exponents (p,q) for slip are per family, shear band got own ones. exponent for twin (r) now per family
fixed bugs in lattice ("empty" interactions should be 1 not zero)
see both Phase examples to check what is needed
removed structure type for hex, fcc, bcc, now defining slip/twin systems for each phase found in material.config
constitutive modules will only be initialized if needed
homogenizedC function is only needed for models incorporating twinning in a physical way (titanmod and dislotwin)
temperature is stored in crystallite, but homogeneous on one IP (not an component (grain) quantity and an input value parsed in by the BVP solver.
introduced heat, a component (grain) quantity which is homogenized before returned to the heat transfer solver.
went ahead with removal of dummy functions in homogenization and constitutive, this time mainly reduced function signatures to reflect actually needed quantities.
remove potentially dangerous short circuiting in homogenization files
added doxygen comment for nonlocal (giving the functions a name)
fixed wrong definition of maxnchungs introcuded into dislotwin with last commit, causes trouble with hex
DAMASK_marcXXXX.f90 now is not a copy any more but contains one definition and an include statement
setup_code of spectral solver is now replaced by the standard 1) configure 2) make 3) make install
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
added some OMP FLUSH statements were necessary
replaced openmp do by forall construct where possible; this is much safer and perhaps even as fast for small loops
changed order of arrays in nearest neighbor search to make it fortran fast
constitutive.f90 and homogenization.f90 write state size out during initialization
setup/setup_processing.py is using byterecl to be compatible with binary files written out by solver
added compiler switches for gfortran and ifort to check for standard conformity
old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
dislocation velocities are stored in the state, so we actually now have three "parts" of the state, the basic states that are updated by "constitutive_dotState" come first, then the dependent states that are calculated by "constitutive_microstructure" follow, and finally we have a last part reserved for other variables that just use the memory reserved by the state array and are updated somewhere else.
constitutive:
LpAndItsTangent does not need the full state, but only the local state, so changed that at least for the nonlocal constitutive law
* Also added some more openmp directives to increase percentage of parallelized code.
* "implicit none" was missing in two subroutines of homogenization and constitutive.
0 : only version infos and all from "hypela2"/"umat"
1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info
2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines
3 : basic outputs from "homogenization.f90"
4 : extensive outputs from "homogenization.f90"
5 : basic outputs from "crystallite.f90"
6 : extensive outputs from "crystallite.f90"
7 : basic outputs from the constitutive files
8 : extensive outputs from the constitutive files
If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
* removed input variables in constitutive_collectDotState and constitutive_postResults that are not needed anymore (because of recent changes in constitutive_nonlocal)
* also put a call to constitutive_microstructure at the start of each crystallite_integration subroutine like it was before. need that for nonlocal model in case of crystallite cutback
* now remembering stiffness similar to how we do it for Lp etc.; avoids undefined stiffness values for nonconverged stiffness calculation
* non-local stuff:
* changed non-local kinetics (Gilman2002)
* enforce zero shearrate for overall carrrier density below relevant density
* enforce zero density for those states that become negative and were below relevant density before
* dislocation velocity is not limited by V^(1/3) / dt anymore
restructured nonlocal_dotstate, to be able to easily switch on and off particular effects in the microstructure evolution
nonlocal_dotstate now enforces a cutback when single density runs the risk of becoming negative; in the case of a state already below the relevantState dotState is set to zero
introduced two new output variables: rho_dot_edge and rho_dot_screw
--> new "crystallite" part in config file
--> new "crystallite" option for microstructures
--> new output file "...job.outputCrystallite" to be used in conjunction with marc_addUserOutput for meaningful naming of User Defined Vars.
- reworked contribution of immobile dislocation density for rate equations
- flux is now calculated on the basis of interpolated velocities and densities at the interface; both incoming and outgoing fluxes are considered, so every material point only changes his own dotState
- dislocation velocity is now globally defined and calculated by subroutine constitutive_nonlocal_kinetics; the subroutine is called inside _LpAndItsTangent as well as _microstructure; therefore, microstructure now needs Tstar_v as additional input; in the future one should perhaps create a subroutine constitutive_kinetics that calls constitutive_nonlocal_kinetics separately, to clearly distinguish between microstructural and kinetic variables
- better use flux density vector as output variable instead of scalar flux values for each interface
- added output variables internal and external resolved stress
crystallite:
- added flag to force local stiffness calculation in case of nonlocal model
- misorientation angle is explicitly set to zero when no neighbor can be found
debug:
- added flag "selectiveDebugger" that is used when debugging statements should only affect a specific element, ip and grain; these are specified with the new variables debug_e, debug_i and debug_g
- debugger can now be used in its original sense
The calculation of the misorientation is now done once in crystallite init and at the end of every FE increment. This saves a lot of time compared to doing it in dotState for every crystallite subinc.
- corrected flux term
- multiplication is now aware of dislocation type
- corrected change rate for "dipole size" dupper
- corrected term for dipole dissociation by stress change
- added transmissivity term in fluxes which accounts for misorientation between two neighboring grains (yet hardcoded transmissivity according to misorientation angle)
- added more output variables
constitutive:
- 2 additional variables "previousDotState" and "previousDotState2", which are used to store the previous and second previous dotState (used in crystallite for acceleration/stabilization of state integration)
- timer for dotState now measures the time for calls to constitutive_ collectState (used to reside in crystallite_updateState, which is not critical in terms of calculation time anymore)
crystallite:
- convergence check for nonlocal elments is now done at end of crystallite loop, not at the beginning; we simple set all elements to not converged if there is at least one nonlocal element that did not converge
- need call to microstructure before first call to collect dotState for dependent states
- stiffness calculation (jacobian): if there are nonlocal elements, we also have to consider changes in our neighborhood's states; so for every perturbed component in a single ip, we have to loop over all elements; since this is extremely time-consuming, we just perturb one component per cycle, starting with the one that changes the most during regular time step.
- updateState gets a damping prefactor for our dotState that helps to improve convergence; prefactor is calculated according to change of dotState
IO:
- additional warning message for unknown crystal symmetry
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
- take orientation gradients into account when calculating dislocation stress and dislocation fluxes
- hard coded value for nu
- changed kinetics (parameter G0 is currently defined as a parameter, needs to be read from material.config)
- added some output statements
constitutive:
- some functions and subroutines needed additional input variables for passing to constitutive_nonlocal
crystallite:
- some functions and subroutines needed additional input variables for passing to constitutive
- call microstructure with current temperature, Fp, Fe, not "sub0" values
- show number of IPs, that are "onTrack" instead of those not "onTrack"
- calculate Fe at beginning of substep, since we need it for state preguess
(state < relevant state) or (residuum < relative tolerance * state)
since the relevant value for the state variables depend on their nature and can vary by large scales (e.g. volume fraction: 1e-10, dislocation density: 1e5) it is not possible to set a unique value. instead the constitutive law has to decide what is relevant. therefore, all constitutive laws now read in parameters from the material.config that determine the values for relevantState [@luc: in dislobased law relevant State is for the moment generally set to 1e-200, so no additional parameters necessary in material.config. if you also want this feature, we can still implement it, no big deal]
- added sanity checks in constitutive_nonlocal.f90
- corrected coordinate transformation for backstress calculation in constitutive_nonlocal.f90
- corrected equations for evolution of dipole dislocation densities (athermal annihilation and formation by glide)
- dipole dislocations with evolution
crystallite.f90:
- collect state uses subdt and subTstar0_v
- in nonlocal modus: set all crystallites to broken if one is not on track anymore after either stress integration or state update
- constitutive_microstructure is now called inside state update and not in integrate_stress anymore
material.config:
- new parameter for nonlocal constitution
CPFEM.f90:
- age Tstar after increment was finished
debugging memory leak closed
debugging counters corrected
center of gravity stored in mesh
state updated is now split into a collecting loop and an execution
updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged
added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math
non-converged crystallite triggers materialpoint cutback (used to respond elastically)
non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
# non-greedy memory allocation
# generation of outputConstitutive to allow for script-based T16 extraction
# exchange of phenomenological by more general phenopowerlaw
# lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.)
# nicer debugging output
# changed some error/warning codes
# plus potentially some minor additional brushes here and there
Martin Diehl