common blocks from 2012
updated setup to also create DAMASK_marc2012.f90
This commit is contained in:
Franz Roters
parent
a5c27f22ca
commit
d3d0cfdab1
|
|
@ -0,0 +1,206 @@
|
||||||
|
! common block definition file taken from respective MSC.Marc release and reformated to free format
|
||||||
|
!***********************************************************************
|
||||||
|
!
|
||||||
|
! File: concom.cmn
|
||||||
|
!
|
||||||
|
! MSC.Marc include file
|
||||||
|
!
|
||||||
|
integer(pInt) &
|
||||||
|
iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva, idyn, idynt,&
|
||||||
|
ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,&
|
||||||
|
ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,&
|
||||||
|
ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,&
|
||||||
|
itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,&
|
||||||
|
lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,&
|
||||||
|
icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,&
|
||||||
|
isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,&
|
||||||
|
ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,&
|
||||||
|
ncycnt, marmen , idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,&
|
||||||
|
ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,&
|
||||||
|
imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,&
|
||||||
|
kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,&
|
||||||
|
iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,&
|
||||||
|
ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush, istream_input,&
|
||||||
|
iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,&
|
||||||
|
iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout, igena_meth,&
|
||||||
|
magf_meth, non_assumed, iredoboudry, ioffsz0
|
||||||
|
integer(pInt) num_concom
|
||||||
|
parameter(num_concom=233)
|
||||||
|
common/marc_concom/&
|
||||||
|
iacous, iasmbl, iautth, ibear, icompl, iconj, icreep, ideva(60), idyn, idynt,&
|
||||||
|
ielas, ielcma, ielect, iform, ifour, iharm, ihcps, iheat, iheatt, ihresp,&
|
||||||
|
ijoule, ilem, ilnmom, iloren, inc, incext, incsub, ipass, iplres, ipois,&
|
||||||
|
ipoist, irpflo, ismall, ismalt, isoil, ispect, ispnow, istore, iswep, ithcrp,&
|
||||||
|
itherm, iupblg, iupdat, jacflg, jel, jparks, largst, lfond, loadup, loaduq,&
|
||||||
|
lodcor, lovl, lsub, magnet, ncycle, newtnt, newton, noshr, linear, ivscpl,&
|
||||||
|
icrpim, iradrt, ipshft, itshr, iangin, iupmdr, iconjf, jincfl, jpermg, jhour,&
|
||||||
|
isolvr, jritz, jtable, jshell, jdoubl, jform, jcentr, imini, kautth, iautof,&
|
||||||
|
ibukty, iassum, icnstd, icnstt, kmakmas, imethvp, iradrte, iradrtp, iupdate, iupdatp,&
|
||||||
|
ncycnt, marmen, idynme, ihavca, ispf, kmini, imixex, largtt, kdoela, iautofg,&
|
||||||
|
ipshftp, idntrc, ipore, jtablm, jtablc, isnecma, itrnspo, imsdif, jtrnspo, mcnear,&
|
||||||
|
imech, imecht, ielcmat, ielectt, magnett, imsdift, noplas, jtabls, jactch, jtablth,&
|
||||||
|
kgmsto , jpzo, ifricsh, iremkin, iremfor, ishearp, jspf, machining, jlshell, icompsol,&
|
||||||
|
iupblgfo, jcondir, nstcrp, nactive, ipassref, nstspnt, ibeart, icheckmpc, noline, icuring,&
|
||||||
|
ishrink, ioffsflg, isetoff, ioffsetm,iharmt, inc_incdat, iautspc, ibrake, icbush , istream_input,&
|
||||||
|
iprsinp, ivlsinp, ifirst_time,ipin_m, jgnstr_glb, imarc_return,iqvcinp, nqvceid, istpnx, imicro1,&
|
||||||
|
iaxisymm, jbreakglue,iglstif, jfastasm,iwear, iwearcf, imixmeth, ielcmadyn, idinout,igena_meth,&
|
||||||
|
magf_meth, non_assumed, iredoboudry, ioffsz0
|
||||||
|
!
|
||||||
|
! comments of variables:
|
||||||
|
!
|
||||||
|
! ideva(60) - debug print out flag
|
||||||
|
! 1 print element stiffness matrices, mass matrix
|
||||||
|
! 2 output matrices used in tying
|
||||||
|
! 3 force the solution of a nonpositive definite matrix
|
||||||
|
! 4 print info of connections to each node
|
||||||
|
! 5 info of gap convergence, internal heat generated, contact
|
||||||
|
! touching and separation
|
||||||
|
! 6 nodal value array during rezoning
|
||||||
|
! 7 tying info in CONRAD GAP option, fluid element numbers in
|
||||||
|
! CHANNEL option
|
||||||
|
! 8 output incremental displacements in local coord. system
|
||||||
|
! 9 latent heat output
|
||||||
|
! 10 stress-strain in local coord. system
|
||||||
|
! 11 additional info on interlaminar stress
|
||||||
|
! 12 output right hand side and solution vector
|
||||||
|
! 13 info of CPU resources used and memory available on NT
|
||||||
|
! 14 info of mesh adaption process, 2D outline information
|
||||||
|
! info of penetration checking for remeshing
|
||||||
|
! save .fem files after afmesh3d meshing
|
||||||
|
! 15 surface energy balance flag
|
||||||
|
! 16 print info regarding pyrolysis
|
||||||
|
! 17 print info of "streamline topology"
|
||||||
|
! 18 print mesh data changes after remeshing
|
||||||
|
! 19 print material flow stress data read in from *.mat file
|
||||||
|
! if unit flag is on, print out flow stress after conversion
|
||||||
|
! 20 print information on table input
|
||||||
|
! 21 print out information regarding kinematic boundary conditions
|
||||||
|
! 22 print out information regarding dist loads, point loads, film
|
||||||
|
! and foundations
|
||||||
|
! 23 print out information about automatic domain decomposition
|
||||||
|
! 24 print out iteration information in SuperForm status report file
|
||||||
|
! 25 print out information for ablation
|
||||||
|
! 26 print out information for films - Table input
|
||||||
|
! 27 print out the tying forces
|
||||||
|
! 28 print out for CASI solver, convection,
|
||||||
|
! 29 DDM single file debug printout
|
||||||
|
! 30 print out cavity debug info
|
||||||
|
! 31 print out welding related info
|
||||||
|
! 32 prints categorized DDM memory usage
|
||||||
|
! 33 print out the cutting info regarding machining feature
|
||||||
|
! 34 print out the list of quantities which can be defined via a table
|
||||||
|
! and for each quantity the supported independent variables
|
||||||
|
! 35 print out detailed coupling region info
|
||||||
|
! 36 print out solver debug info level 1 (Least Detailed)
|
||||||
|
! 37 print out solver debug info level 1 (Medium Detailed)
|
||||||
|
! 38 print out solver debug info level 1 (Very Detailed)
|
||||||
|
! 39 print detailed memory allocation info
|
||||||
|
! 40 print out marc-adams debug info
|
||||||
|
! 41 output rezone mapping post file for debugging
|
||||||
|
! 42 output post file after calling oprofos() for debugging
|
||||||
|
! 43 debug printout for vcct
|
||||||
|
! 44 debug printout for progressive failure
|
||||||
|
! 45 print out automatically generated midside node coordinates (arecrd)
|
||||||
|
! 46 print out message about routine and location, where the ibort is raised (ibort_inc)
|
||||||
|
! 47 print out summary message of element variables on a
|
||||||
|
! group-basis after all the automatic changes have been
|
||||||
|
! made (em_ellibp)
|
||||||
|
! 48 Automatically generate check results based on max and min vals.
|
||||||
|
! These vals are stored in the checkr file, which is inserted
|
||||||
|
! into the *dat file by the generate_check_results script from /marc/tools
|
||||||
|
! 49 Automatically generate check results based on the real calculated values
|
||||||
|
! at the sppecified check result locations.
|
||||||
|
! These vals are stored in the checkr file, which is inserted
|
||||||
|
! into the *dat file by the update_check_results script from /marc/tools
|
||||||
|
! 50 generate a file containing the resistance or capacity matrix;
|
||||||
|
! this file can be used to compare results with a reference file
|
||||||
|
! 51 print out detailed information for segment-to-segment contact
|
||||||
|
! 52 print out detailed relative displacement information
|
||||||
|
! for uniaxial sliding contact
|
||||||
|
! 53 print out detailed sliding direction information for
|
||||||
|
! uniaxial sliding contact
|
||||||
|
! 54 print out detailed information for edges attached to a curve
|
||||||
|
!
|
||||||
|
!
|
||||||
|
! irpflo global flag for rigid plastic flow analysis
|
||||||
|
! = 1 eularian formulation
|
||||||
|
! = 2 regular formulation; rigid material present in the analysis
|
||||||
|
!
|
||||||
|
! jactch = 1 or 2 if elements are activated or deactivated
|
||||||
|
! = 3 if elements are adaptively remeshed or rezoned
|
||||||
|
! = 0 normally / reset to 0 when assembly is done
|
||||||
|
! ifricsh = 0 call to fricsh in otest not needed
|
||||||
|
! = 1 call to fricsh (nodal friction) in otest needed
|
||||||
|
! iremkin = 0 remove deactivated kinematic boundary conditions
|
||||||
|
! immediately - only in new input format (this is default)
|
||||||
|
! = 1 remove deactivated kinematic boundary conditions
|
||||||
|
! gradually - only in new input format
|
||||||
|
! iremfor = 0 remove force boundary conditions immediately -
|
||||||
|
! only in new input format (this is default)
|
||||||
|
! = 1 remove force boundary conditions gradually -
|
||||||
|
! only in new input format (this is default)
|
||||||
|
! ishearp set to 1 if shear panel elements are present in the model
|
||||||
|
!
|
||||||
|
! jspf = 0 not in spf loadcase
|
||||||
|
! > 0 in spf loadcase (jspf=1 during first increment)
|
||||||
|
! machining = 1 if the metal cutting feature is used, for memory allocation purpose
|
||||||
|
! = 0 (default) if no metal cutting feature required
|
||||||
|
!
|
||||||
|
! jlshell = 1 if there is a shell element in the mesh
|
||||||
|
! icompsol = 1 if there is a composite solid element in the mesh
|
||||||
|
! iupblgfo = 1 if follower force for point loads
|
||||||
|
! jcondir = 1 if contact priority option is used
|
||||||
|
! nstcrp = 0 (default) steady state creep flag (undocumented feature.
|
||||||
|
! if not 0, turns off special ncycle = 0 code in radial.f)
|
||||||
|
! nactive = number of active passes, if =1 then it's not a coupled analysis
|
||||||
|
! ipassref = reference ipass, if not in a multiphysics pass ipass=ipassref
|
||||||
|
! icheckmpc = value of mpc-check parameter option
|
||||||
|
! noline = set to 1 in osolty if no line seacrh should be done in ogetst
|
||||||
|
! icuring = set to 1 if the curing is included for the heat transfer analysis.
|
||||||
|
! ishrink = set to 1 if shrinkage strain is included for mechancial analysis.
|
||||||
|
! ioffsflg = 1 for small displacement beam/shell offsets
|
||||||
|
! = 2 for large displacement beam/shell offsets
|
||||||
|
! isetoff = 0 - do not apply beam/shell offsets
|
||||||
|
! = 1 - apply beam/shell offsets
|
||||||
|
! ioffsetm = min. value of offset flag
|
||||||
|
! inc_incdat = flag to record increment number of a new loadcase in incdat.f
|
||||||
|
! iautspc = flag for AutoSPC option
|
||||||
|
! ibrake = brake squeal in this increment
|
||||||
|
! icbush = set to 1 if cbush elements present in model
|
||||||
|
! istream_input = set to 1 for streaming input calling Marc as library
|
||||||
|
! iprsinp = set to 1 if pressure input, introduced so other variables
|
||||||
|
! such as h could be a function of pressure
|
||||||
|
! ivlsinp = set to 1 if velocity input, introduced so other variables
|
||||||
|
! such as h could be a function of velocity
|
||||||
|
! ipin_m = # of beam element with PIN flag
|
||||||
|
! jgnstr_glb = global control over pre or fast integrated composite shells
|
||||||
|
! imarc_return = Marc return flag for streaming input control
|
||||||
|
! iqvcimp = if non-zero, then the number of QVECT boundary conditions
|
||||||
|
! nqvceid = number of QVECT boundary conditions, where emisivity/absorbtion id entered
|
||||||
|
! istpnx = 1 if to stop at end of increment
|
||||||
|
! imicro1 = 1 if micro1 interface is used
|
||||||
|
! iaxisymm = set to 1 if axisymmetric analysis
|
||||||
|
! jbreakglue = set to 1 if breaking glued option is used
|
||||||
|
! iglstif = 1 if ddm and global stiffness matrix formed (sgi solver 6 or solver9)
|
||||||
|
! jfastasm = 1 do fast assembly using SuperForm code
|
||||||
|
! iwear = set to 1 if wear model, set to 2 if wear model and coordinates updated
|
||||||
|
! iwearcf = set to 1 to store nodal coefficient of friction for wear calculation
|
||||||
|
! imixmeth = set=1 then use nonlinear mixture material - allocate memory
|
||||||
|
! ielcmadyn = flag for magnetodynamics
|
||||||
|
! 0 - electromagnetics using newmark beta
|
||||||
|
! 1 - transient magnetics using backward euler
|
||||||
|
! idinout = flag to control if inside out elements should be deactivated
|
||||||
|
! igena_meth = 0 - generalized alpha parameters depend on whether or not contact
|
||||||
|
! is flagged (dynamic,7)
|
||||||
|
! 10 - generalized alpha parameters are optimized for a contact
|
||||||
|
! analysis (dynamic,8)
|
||||||
|
! 11 - generalized alpha parameters are optimized for an analysis
|
||||||
|
! without contact (dynamic,8)
|
||||||
|
! magf_meth = - Method to compute force in magnetostatic - structural
|
||||||
|
! = 1 - Virtual work method
|
||||||
|
! = 2 - Maxwell stress tensor
|
||||||
|
! non_assumed = 1 no assumed strain formulation (forced)
|
||||||
|
! iredoboudry set to 1 if contact boundary needs to be recalculated
|
||||||
|
! ioffsz0 = 1 if composite are used with reference position.ne.0
|
||||||
|
!
|
||||||
|
!***********************************************************************
|
||||||
|
|
@ -0,0 +1,28 @@
|
||||||
|
! common block definition file taken from respective MSC.Marc release and reformated to free format
|
||||||
|
!***********************************************************************
|
||||||
|
!
|
||||||
|
! File: creeps.cmn
|
||||||
|
!
|
||||||
|
! MSC.Marc include file
|
||||||
|
!
|
||||||
|
real(pReal) cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept
|
||||||
|
integer(pInt) icptim,icfte,icfst,icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,&
|
||||||
|
icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa
|
||||||
|
real(pReal) time_beg_lcase,time_beg_inc,fractol,time_beg_pst
|
||||||
|
!
|
||||||
|
integer(pInt) num_creepsr,num_creepsi,num_creeps2r
|
||||||
|
parameter(num_creepsr=40)
|
||||||
|
parameter(num_creepsi=18)
|
||||||
|
parameter(num_creeps2r=4)
|
||||||
|
common/marc_creeps/cptim,timinc,timinc_p,timinc_s,timincm,timinc_a,timinc_b,creept(33),icptim,icfte,icfst,&
|
||||||
|
icfeq,icftm,icetem,mcreep,jcreep,icpa,icftmp,icfstr,icfqcp,icfcpm,icrppr,icrcha,icpb,iicpmt,iicpa
|
||||||
|
common/marc_creeps2/time_beg_lcase,time_beg_inc,fractol,time_beg_pst
|
||||||
|
!
|
||||||
|
! time_beg_lcase time at the beginning of the current load case
|
||||||
|
! time_beg_inc time at the beginning of the current increment
|
||||||
|
! fractol fraction of loadcase or increment time when we
|
||||||
|
! consider it to be finished
|
||||||
|
! time_beg_pst time corresponding to first increment to be
|
||||||
|
! read in from thermal post file for auto step
|
||||||
|
!
|
||||||
|
!***********************************************************************
|
||||||
|
|
@ -6,7 +6,7 @@ import os,sys,string,re,damask
|
||||||
architectures = {
|
architectures = {
|
||||||
'marc': {
|
'marc': {
|
||||||
'parent': 'DAMASK_marc.f90',
|
'parent': 'DAMASK_marc.f90',
|
||||||
'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011'],
|
'versions' : ['%%MARCVERSION%%','2007r1','2008r1','2010','2011','2012'],
|
||||||
},
|
},
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue