2011-04-07 12:50:28 +05:30
! Copyright 2011 Max-Planck-Institut für Eisenforschung GmbH
2011-04-04 19:39:54 +05:30
!
! This file is part of DAMASK,
2011-04-07 12:50:28 +05:30
! the Düsseldorf Advanced MAterial Simulation Kit.
2011-04-04 19:39:54 +05:30
!
! DAMASK is free software: you can redistribute it and/or modify
! it under the terms of the GNU General Public License as published by
! the Free Software Foundation, either version 3 of the License, or
! (at your option) any later version.
!
! DAMASK is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License
! along with DAMASK. If not, see <http://www.gnu.org/licenses/>.
!
!##############################################################
2009-08-31 20:39:15 +05:30
!* $Id$
2010-10-26 19:19:58 +05:30
!************************************
2009-08-11 22:01:57 +05:30
!* Module: CONSTITUTIVE_NONLOCAL *
!************************************
!* contains: *
!* - constitutive equations *
!* - parameters definition *
!************************************
MODULE constitutive_nonlocal
!* Include other modules
use prec , only : pReal , pInt
implicit none
!* Definition of parameters
character ( len = * ) , parameter :: constitutive_nonlocal_label = 'nonlocal'
2010-02-17 18:51:36 +05:30
character ( len = 22 ) , dimension ( 10 ) , parameter :: constitutive_nonlocal_listBasicStates = ( / 'rhoSglEdgePosMobile ' , &
'rhoSglEdgeNegMobile ' , &
'rhoSglScrewPosMobile ' , &
'rhoSglScrewNegMobile ' , &
'rhoSglEdgePosImmobile ' , &
'rhoSglEdgeNegImmobile ' , &
'rhoSglScrewPosImmobile' , &
'rhoSglScrewNegImmobile' , &
'rhoDipEdge ' , &
'rhoDipScrew ' / ) ! list of "basic" microstructural state variables that are independent from other state variables
2011-11-09 14:52:52 +05:30
character ( len = 16 ) , dimension ( 3 ) , parameter :: constitutive_nonlocal_listDependentStates = ( / 'rhoForest ' , &
'tauThreshold ' , &
2012-01-17 15:56:57 +05:30
'tauBack ' / ) ! list of microstructural state variables that depend on other state variables
2012-01-25 22:34:37 +05:30
character ( len = 16 ) , dimension ( 4 ) , parameter :: constitutive_nonlocal_listOtherStates = ( / 'velocityEdgePos ' , &
'velocityEdgeNeg ' , &
'velocityScrewPos' , &
'velocityScrewNeg' / ) ! list of other dependent state variables that are not updated by microstructure
2009-09-18 21:07:14 +05:30
real ( pReal ) , parameter :: kB = 1.38e-23_pReal ! Physical parameter, Boltzmann constant in J/Kelvin
2009-08-11 22:01:57 +05:30
!* Definition of global variables
2011-11-04 18:42:17 +05:30
integer ( pInt ) , dimension ( : ) , allocatable :: constitutive_nonlocal_sizeDotState , & ! number of dotStates = number of basic state variables
constitutive_nonlocal_sizeDependentState , & ! number of dependent state variables
constitutive_nonlocal_sizeState , & ! total number of state variables
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_sizePostResults ! cumulative size of post results
integer ( pInt ) , dimension ( : , : ) , allocatable , target :: constitutive_nonlocal_sizePostResult ! size of each post result output
character ( len = 64 ) , dimension ( : , : ) , allocatable , target :: constitutive_nonlocal_output ! name of each post result output
character ( len = 32 ) , dimension ( : ) , allocatable :: constitutive_nonlocal_structureName ! name of the lattice structure
integer ( pInt ) , dimension ( : ) , allocatable :: constitutive_nonlocal_structure , & ! number representing the kind of lattice structure
constitutive_nonlocal_totalNslip ! total number of active slip systems for each instance
integer ( pInt ) , dimension ( : , : ) , allocatable :: constitutive_nonlocal_Nslip , & ! number of active slip systems for each family and instance
constitutive_nonlocal_slipFamily , & ! lookup table relating active slip system to slip family for each instance
constitutive_nonlocal_slipSystemLattice ! lookup table relating active slip system index to lattice slip system index for each instance
real ( pReal ) , dimension ( : ) , allocatable :: constitutive_nonlocal_CoverA , & ! c/a ratio for hex type lattice
constitutive_nonlocal_C11 , & ! C11 element in elasticity matrix
constitutive_nonlocal_C12 , & ! C12 element in elasticity matrix
constitutive_nonlocal_C13 , & ! C13 element in elasticity matrix
constitutive_nonlocal_C33 , & ! C33 element in elasticity matrix
constitutive_nonlocal_C44 , & ! C44 element in elasticity matrix
constitutive_nonlocal_Gmod , & ! shear modulus
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_nu , & ! poisson's ratio
constitutive_nonlocal_atomicVolume , & ! atomic volume
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_Dsd0 , & ! prefactor for self-diffusion coefficient
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
constitutive_nonlocal_Qsd , & ! activation enthalpy for diffusion
2010-10-26 18:46:37 +05:30
constitutive_nonlocal_aTolRho , & ! absolute tolerance for dislocation density in state integration
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_R , & ! cutoff radius for dislocation stress
2012-02-03 18:20:54 +05:30
constitutive_nonlocal_doublekinkwidth , & ! width of a doubkle kink in multiples of the burgers vector length b
constitutive_nonlocal_solidSolutionEnergy , & ! activation energy for solid solution in J
constitutive_nonlocal_solidSolutionSize , & ! solid solution obstacle size in multiples of the burgers vector length
constitutive_nonlocal_solidSolutionConcentration , & ! concentration of solid solution in atomic parts
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_p , & ! parameter for kinetic law (Kocks,Argon,Ashby)
constitutive_nonlocal_q , & ! parameter for kinetic law (Kocks,Argon,Ashby)
constitutive_nonlocal_viscosity , & ! viscosity for dislocation glide in Pa s
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_fattack , & ! attack frequency in Hz
2011-02-16 22:05:38 +05:30
constitutive_nonlocal_rhoSglScatter , & ! standard deviation of scatter in initial dislocation density
constitutive_nonlocal_surfaceTransmissivity ! transmissivity at free surface
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( : , : , : ) , allocatable :: constitutive_nonlocal_Cslip_66 ! elasticity matrix in Mandel notation for each instance
real ( pReal ) , dimension ( : , : , : , : , : ) , allocatable :: constitutive_nonlocal_Cslip_3333 ! elasticity matrix for each instance
2010-01-05 21:37:24 +05:30
real ( pReal ) , dimension ( : , : ) , allocatable :: constitutive_nonlocal_rhoSglEdgePos0 , & ! initial edge_pos dislocation density per slip system for each family and instance
constitutive_nonlocal_rhoSglEdgeNeg0 , & ! initial edge_neg dislocation density per slip system for each family and instance
constitutive_nonlocal_rhoSglScrewPos0 , & ! initial screw_pos dislocation density per slip system for each family and instance
constitutive_nonlocal_rhoSglScrewNeg0 , & ! initial screw_neg dislocation density per slip system for each family and instance
constitutive_nonlocal_rhoDipEdge0 , & ! initial edge dipole dislocation density per slip system for each family and instance
constitutive_nonlocal_rhoDipScrew0 , & ! initial screw dipole dislocation density per slip system for each family and instance
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_lambda0PerSlipFamily , & ! mean free path prefactor for each family and instance
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_lambda0 , & ! mean free path prefactor for each slip system and instance
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_burgersPerSlipFamily , & ! absolute length of burgers vector [m] for each family and instance
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_burgers , & ! absolute length of burgers vector [m] for each slip system and instance
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_interactionSlipSlip ! coefficients for slip-slip interaction for each interaction type and instance
2012-01-25 22:34:37 +05:30
real ( pReal ) , dimension ( : , : , : ) , allocatable :: constitutive_nonlocal_minimumDipoleHeightPerSlipFamily , & ! minimum stable edge/screw dipole height for each family and instance
constitutive_nonlocal_minimumDipoleHeight , & ! minimum stable edge/screw dipole height for each slip system and instance
constitutive_nonlocal_peierlsStressPerSlipFamily , & ! Peierls stress (edge and screw)
2012-02-03 18:20:54 +05:30
constitutive_nonlocal_peierlsStress ! Peierls stress (edge and screw)
2011-11-04 18:42:17 +05:30
real ( pReal ) , dimension ( : , : , : , : , : ) , allocatable :: constitutive_nonlocal_rhoDotFlux ! dislocation convection term
2010-10-15 18:49:26 +05:30
real ( pReal ) , dimension ( : , : , : , : , : , : ) , allocatable :: constitutive_nonlocal_compatibility ! slip system compatibility between me and my neighbors
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( : , : , : ) , allocatable :: constitutive_nonlocal_forestProjectionEdge , & ! matrix of forest projections of edge dislocations for each instance
constitutive_nonlocal_forestProjectionScrew , & ! matrix of forest projections of screw dislocations for each instance
2010-05-21 14:21:15 +05:30
constitutive_nonlocal_interactionMatrixSlipSlip ! interaction matrix of the different slip systems for each instance
2011-11-09 14:52:52 +05:30
real ( pReal ) , dimension ( : , : , : , : ) , allocatable :: constitutive_nonlocal_lattice2slip , & ! orthogonal transformation matrix from lattice coordinate system to slip coordinate system (passive rotation !!!)
constitutive_nonlocal_accumulatedShear ! accumulated shear per slip system up to the start of the FE increment
2011-08-02 16:47:45 +05:30
2009-08-11 22:01:57 +05:30
CONTAINS
!****************************************
2012-01-17 15:56:57 +05:30
!* - constitutive_nonlocal_init
!* - constitutive_nonlocal_stateInit
!* - constitutive_nonlocal_aTolState
!* - constitutive_nonlocal_homogenizedC
!* - constitutive_nonlocal_microstructure
!* - constitutive_nonlocal_kinetics
!* - constitutive_nonlocal_LpAndItsTangent
!* - constitutive_nonlocal_dotState
!* - constitutive_nonlocal_dotTemperature
!* - constitutive_nonlocal_updateCompatibility
!* - constitutive_nonlocal_postResults
2009-08-11 22:01:57 +05:30
!****************************************
!**************************************
!* Module initialization *
!**************************************
subroutine constitutive_nonlocal_init ( file )
2012-02-13 19:48:07 +05:30
use , intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
2009-08-11 22:01:57 +05:30
use prec , only : pInt , pReal
use math , only : math_Mandel3333to66 , &
math_Voigt66to3333 , &
2011-08-02 16:47:45 +05:30
math_mul3x3 , &
2012-01-26 19:20:00 +05:30
math_transpose33
2009-08-11 22:01:57 +05:30
use IO , only : IO_lc , &
IO_getTag , &
IO_isBlank , &
IO_stringPos , &
IO_stringValue , &
IO_floatValue , &
IO_intValue , &
IO_error
2011-03-21 16:01:17 +05:30
use debug , only : debug_verbosity
2010-02-17 18:51:36 +05:30
use mesh , only : mesh_NcpElems , &
2010-10-12 18:38:54 +05:30
mesh_maxNips , &
FE_maxNipNeighbors
2010-02-17 18:51:36 +05:30
use material , only : homogenization_maxNgrains , &
phase_constitution , &
2009-08-11 22:01:57 +05:30
phase_constitutionInstance , &
phase_Noutput
use lattice , only : lattice_maxNslipFamily , &
lattice_maxNtwinFamily , &
lattice_maxNslip , &
lattice_maxNtwin , &
lattice_maxNinteraction , &
lattice_NslipSystem , &
lattice_NtwinSystem , &
lattice_initializeStructure , &
lattice_Qtwin , &
lattice_sd , &
lattice_sn , &
lattice_st , &
lattice_interactionSlipSlip
!*** output variables
!*** input variables
integer ( pInt ) , intent ( in ) :: file
!*** local variables
integer ( pInt ) , parameter :: maxNchunks = 21
integer ( pInt ) , dimension ( 1 + 2 * maxNchunks ) :: positions
integer ( pInt ) section , &
maxNinstance , &
maxTotalNslip , &
myStructure , &
f , & ! index of my slip family
i , & ! index of my instance of this constitution
j , &
k , &
l , &
2009-09-18 21:07:14 +05:30
ns , & ! short notation for total number of active slip systems for the current instance
2009-08-11 22:01:57 +05:30
o , & ! index of my output
s , & ! index of my slip system
s1 , & ! index of my slip system
s2 , & ! index of my slip system
2009-08-24 13:46:01 +05:30
it , & ! index of my interaction type
2009-08-11 22:01:57 +05:30
output , &
mySize
character ( len = 64 ) tag
character ( len = 1024 ) line
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
!$OMP CRITICAL (write2out)
write ( 6 , * )
2011-08-26 19:27:29 +05:30
write ( 6 , * ) '<<<+- constitutive_' , trim ( constitutive_nonlocal_label ) , ' init -+>>>'
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
write ( 6 , * ) '$Id$'
2012-02-01 00:48:55 +05:30
#include "compilation_info.f90"
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
!$OMP END CRITICAL (write2out)
2009-08-11 22:01:57 +05:30
maxNinstance = count ( phase_constitution == constitutive_nonlocal_label )
if ( maxNinstance == 0 ) return ! we don't have to do anything if there's no instance for this constitutive law
2011-03-21 16:01:17 +05:30
if ( debug_verbosity > 0 ) then
!$OMP CRITICAL (write2out)
2012-02-01 00:48:55 +05:30
write ( 6 , '(a16,1x,i5)' ) '# instances:' , maxNinstance
2011-03-21 16:01:17 +05:30
!$OMP END CRITICAL (write2out)
endif
2009-08-11 22:01:57 +05:30
!*** space allocation for global variables
2009-08-28 19:20:47 +05:30
allocate ( constitutive_nonlocal_sizeDotState ( maxNinstance ) )
2011-11-04 18:42:17 +05:30
allocate ( constitutive_nonlocal_sizeDependentState ( maxNinstance ) )
2009-08-28 19:20:47 +05:30
allocate ( constitutive_nonlocal_sizeState ( maxNinstance ) )
allocate ( constitutive_nonlocal_sizePostResults ( maxNinstance ) )
allocate ( constitutive_nonlocal_sizePostResult ( maxval ( phase_Noutput ) , maxNinstance ) )
allocate ( constitutive_nonlocal_output ( maxval ( phase_Noutput ) , maxNinstance ) )
constitutive_nonlocal_sizeDotState = 0_pInt
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_sizeDependentState = 0_pInt
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_sizeState = 0_pInt
constitutive_nonlocal_sizePostResults = 0_pInt
constitutive_nonlocal_sizePostResult = 0_pInt
constitutive_nonlocal_output = ''
allocate ( constitutive_nonlocal_structureName ( maxNinstance ) )
allocate ( constitutive_nonlocal_structure ( maxNinstance ) )
allocate ( constitutive_nonlocal_Nslip ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_slipFamily ( lattice_maxNslip , maxNinstance ) )
allocate ( constitutive_nonlocal_slipSystemLattice ( lattice_maxNslip , maxNinstance ) )
allocate ( constitutive_nonlocal_totalNslip ( maxNinstance ) )
constitutive_nonlocal_structureName = ''
constitutive_nonlocal_structure = 0_pInt
constitutive_nonlocal_Nslip = 0_pInt
constitutive_nonlocal_slipFamily = 0_pInt
constitutive_nonlocal_slipSystemLattice = 0_pInt
constitutive_nonlocal_totalNslip = 0_pInt
allocate ( constitutive_nonlocal_CoverA ( maxNinstance ) )
allocate ( constitutive_nonlocal_C11 ( maxNinstance ) )
allocate ( constitutive_nonlocal_C12 ( maxNinstance ) )
allocate ( constitutive_nonlocal_C13 ( maxNinstance ) )
allocate ( constitutive_nonlocal_C33 ( maxNinstance ) )
allocate ( constitutive_nonlocal_C44 ( maxNinstance ) )
allocate ( constitutive_nonlocal_Gmod ( maxNinstance ) )
allocate ( constitutive_nonlocal_nu ( maxNinstance ) )
allocate ( constitutive_nonlocal_atomicVolume ( maxNinstance ) )
2011-01-26 15:47:42 +05:30
allocate ( constitutive_nonlocal_Dsd0 ( maxNinstance ) )
2009-08-28 19:20:47 +05:30
allocate ( constitutive_nonlocal_Qsd ( maxNinstance ) )
2010-10-26 18:46:37 +05:30
allocate ( constitutive_nonlocal_aTolRho ( maxNinstance ) )
2009-08-28 19:20:47 +05:30
allocate ( constitutive_nonlocal_Cslip_66 ( 6 , 6 , maxNinstance ) )
allocate ( constitutive_nonlocal_Cslip_3333 ( 3 , 3 , 3 , 3 , maxNinstance ) )
2010-06-07 20:02:23 +05:30
allocate ( constitutive_nonlocal_R ( maxNinstance ) )
2012-02-03 18:20:54 +05:30
allocate ( constitutive_nonlocal_doublekinkwidth ( maxNinstance ) )
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_solidSolutionEnergy ( maxNinstance ) )
2012-02-03 18:20:54 +05:30
allocate ( constitutive_nonlocal_solidSolutionSize ( maxNinstance ) )
allocate ( constitutive_nonlocal_solidSolutionConcentration ( maxNinstance ) )
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_p ( maxNinstance ) )
allocate ( constitutive_nonlocal_q ( maxNinstance ) )
allocate ( constitutive_nonlocal_viscosity ( maxNinstance ) )
2011-01-26 15:47:42 +05:30
allocate ( constitutive_nonlocal_fattack ( maxNinstance ) )
2011-02-04 21:11:32 +05:30
allocate ( constitutive_nonlocal_rhoSglScatter ( maxNinstance ) )
2011-02-16 22:05:38 +05:30
allocate ( constitutive_nonlocal_surfaceTransmissivity ( maxNinstance ) )
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_CoverA = 0.0_pReal
constitutive_nonlocal_C11 = 0.0_pReal
constitutive_nonlocal_C12 = 0.0_pReal
constitutive_nonlocal_C13 = 0.0_pReal
constitutive_nonlocal_C33 = 0.0_pReal
constitutive_nonlocal_C44 = 0.0_pReal
constitutive_nonlocal_Gmod = 0.0_pReal
constitutive_nonlocal_atomicVolume = 0.0_pReal
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_Dsd0 = 0.0_pReal
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_Qsd = 0.0_pReal
2010-10-26 18:46:37 +05:30
constitutive_nonlocal_aTolRho = 0.0_pReal
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_nu = 0.0_pReal
constitutive_nonlocal_Cslip_66 = 0.0_pReal
constitutive_nonlocal_Cslip_3333 = 0.0_pReal
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_R = - 1.0_pReal
2012-02-03 18:20:54 +05:30
constitutive_nonlocal_doublekinkwidth = 0.0_pReal
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_solidSolutionEnergy = 0.0_pReal
2012-02-03 18:20:54 +05:30
constitutive_nonlocal_solidSolutionSize = 0.0_pReal
constitutive_nonlocal_solidSolutionConcentration = 0.0_pReal
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_p = 1.0_pReal
constitutive_nonlocal_q = 1.0_pReal
constitutive_nonlocal_viscosity = 0.0_pReal
2011-01-26 15:47:42 +05:30
constitutive_nonlocal_fattack = 0.0_pReal
2011-02-04 21:11:32 +05:30
constitutive_nonlocal_rhoSglScatter = 0.0_pReal
2011-02-16 22:05:38 +05:30
constitutive_nonlocal_surfaceTransmissivity = 1.0_pReal
2009-08-28 19:20:47 +05:30
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_rhoSglEdgePos0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_rhoSglEdgeNeg0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_rhoSglScrewPos0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_rhoSglScrewNeg0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_rhoDipEdge0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_rhoDipScrew0 ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_burgersPerSlipFamily ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_Lambda0PerSlipFamily ( lattice_maxNslipFamily , maxNinstance ) )
allocate ( constitutive_nonlocal_interactionSlipSlip ( lattice_maxNinteraction , maxNinstance ) )
2010-06-07 20:02:23 +05:30
constitutive_nonlocal_rhoSglEdgePos0 = - 1.0_pReal
constitutive_nonlocal_rhoSglEdgeNeg0 = - 1.0_pReal
constitutive_nonlocal_rhoSglScrewPos0 = - 1.0_pReal
constitutive_nonlocal_rhoSglScrewNeg0 = - 1.0_pReal
constitutive_nonlocal_rhoDipEdge0 = - 1.0_pReal
constitutive_nonlocal_rhoDipScrew0 = - 1.0_pReal
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_burgersPerSlipFamily = 0.0_pReal
constitutive_nonlocal_lambda0PerSlipFamily = 0.0_pReal
constitutive_nonlocal_interactionSlipSlip = 0.0_pReal
2009-08-11 22:01:57 +05:30
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( lattice_maxNslipFamily , 2 , maxNinstance ) )
allocate ( constitutive_nonlocal_peierlsStressPerSlipFamily ( lattice_maxNslipFamily , 2 , maxNinstance ) )
constitutive_nonlocal_minimumDipoleHeightPerSlipFamily = 0.0_pReal
constitutive_nonlocal_peierlsStressPerSlipFamily = 0.0_pReal
2011-03-29 12:57:19 +05:30
2009-08-11 22:01:57 +05:30
!*** readout data from material.config file
rewind ( file )
line = ''
2012-02-13 19:48:07 +05:30
section = 0_pInt
2009-08-11 22:01:57 +05:30
do while ( IO_lc ( IO_getTag ( line , '<' , '>' ) ) / = 'phase' ) ! wind forward to <phase>
read ( file , '(a1024)' , END = 100 ) line
enddo
do ! read thru sections of phase part
read ( file , '(a1024)' , END = 100 ) line
if ( IO_isBlank ( line ) ) cycle ! skip empty lines
if ( IO_getTag ( line , '<' , '>' ) / = '' ) exit ! stop at next part
if ( IO_getTag ( line , '[' , ']' ) / = '' ) then ! next section
2012-02-13 19:48:07 +05:30
section = section + 1_pInt
output = 0_pInt ! reset output counter
2011-02-16 22:05:38 +05:30
cycle
2009-08-11 22:01:57 +05:30
endif
2012-02-13 19:48:07 +05:30
if ( section > 0_pInt . and . phase_constitution ( section ) == constitutive_nonlocal_label ) then ! one of my sections
2009-08-11 22:01:57 +05:30
i = phase_constitutionInstance ( section ) ! which instance of my constitution is present phase
positions = IO_stringPos ( line , maxNchunks )
2012-02-13 19:48:07 +05:30
tag = IO_lc ( IO_stringValue ( line , positions , 1_pInt ) ) ! extract key
2009-08-11 22:01:57 +05:30
select case ( tag )
2011-02-16 22:05:38 +05:30
case ( 'constitution' , '/nonlocal/' )
cycle
2009-08-11 22:01:57 +05:30
case ( '(output)' )
2012-02-13 19:48:07 +05:30
output = output + 1_pInt
constitutive_nonlocal_output ( output , i ) = IO_lc ( IO_stringValue ( line , positions , 2_pInt ) )
2009-08-11 22:01:57 +05:30
case ( 'lattice_structure' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_structureName ( i ) = IO_lc ( IO_stringValue ( line , positions , 2_pInt ) )
2012-01-25 22:34:37 +05:30
case ( 'c/a_ratio' , 'covera_ratio' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_CoverA ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'c11' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_C11 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'c12' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_C12 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'c13' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_C13 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'c33' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_C33 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'c44' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_C44 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'nslip' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_Nslip ( f , i ) &
= IO_intValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhosgledgepos0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoSglEdgePos0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhosgledgeneg0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoSglEdgeNeg0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhosglscrewpos0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoSglScrewPos0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhosglscrewneg0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoSglScrewNeg0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhodipedge0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoDipEdge0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2010-01-05 21:37:24 +05:30
case ( 'rhodipscrew0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_rhoDipScrew0 ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2009-08-12 16:52:02 +05:30
case ( 'lambda0' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_lambda0PerSlipFamily ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2009-08-11 22:01:57 +05:30
case ( 'burgers' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_burgersPerSlipFamily ( f , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2012-01-25 22:34:37 +05:30
case ( 'cutoffradius' , 'r' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_R ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'minimumdipoleheightedge' , 'ddipminedge' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( f , 1_pInt , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2012-01-25 22:34:37 +05:30
case ( 'minimumdipoleheightscrew' , 'ddipminscrew' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( f , 2_pInt , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2009-08-28 19:20:47 +05:30
case ( 'atomicvolume' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_atomicVolume ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'selfdiffusionprefactor' , 'dsd0' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_Dsd0 ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'selfdiffusionenergy' , 'qsd' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_Qsd ( i ) = IO_floatValue ( line , positions , 2_pInt )
2010-10-26 18:46:37 +05:30
case ( 'atol_rho' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_aTolRho ( i ) = IO_floatValue ( line , positions , 2_pInt )
2009-08-11 22:01:57 +05:30
case ( 'interaction_slipslip' )
2012-02-13 19:48:07 +05:30
forall ( it = 1_pInt : lattice_maxNinteraction ) constitutive_nonlocal_interactionSlipSlip ( it , i ) &
= IO_floatValue ( line , positions , 1_pInt + it )
2012-01-26 18:20:04 +05:30
case ( 'peierlsstressedge' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_peierlsStressPerSlipFamily ( f , 1_pInt , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2012-01-26 18:20:04 +05:30
case ( 'peierlsstressscrew' )
2012-02-13 19:48:07 +05:30
forall ( f = 1_pInt : lattice_maxNslipFamily ) constitutive_nonlocal_peierlsStressPerSlipFamily ( f , 2_pInt , i ) &
= IO_floatValue ( line , positions , 1_pInt + f )
2012-02-03 18:20:54 +05:30
case ( 'doublekinkwidth' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_doublekinkwidth ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'solidsolutionenergy' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_solidSolutionEnergy ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-02-03 18:20:54 +05:30
case ( 'solidsolutionsize' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_solidSolutionSize ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-02-03 18:20:54 +05:30
case ( 'solidsolutionconcentration' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_solidSolutionConcentration ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'p' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_p ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'q' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_q ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'viscosity' , 'glideviscosity' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_viscosity ( i ) = IO_floatValue ( line , positions , 2_pInt )
2012-01-25 22:34:37 +05:30
case ( 'attackfrequency' , 'fattack' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_fattack ( i ) = IO_floatValue ( line , positions , 2_pInt )
2011-02-04 21:11:32 +05:30
case ( 'rhosglscatter' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_rhoSglScatter ( i ) = IO_floatValue ( line , positions , 2_pInt )
2011-02-16 22:05:38 +05:30
case ( 'surfacetransmissivity' )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_surfaceTransmissivity ( i ) = IO_floatValue ( line , positions , 2_pInt )
2011-02-16 22:05:38 +05:30
case default
2012-02-13 19:48:07 +05:30
call IO_error ( 236_pInt , ext_msg = tag )
2009-08-11 22:01:57 +05:30
end select
endif
enddo
100 do i = 1 , maxNinstance
constitutive_nonlocal_structure ( i ) = &
lattice_initializeStructure ( constitutive_nonlocal_structureName ( i ) , constitutive_nonlocal_CoverA ( i ) ) ! our lattice structure is defined in the material.config file by the structureName (and the c/a ratio)
2009-09-18 21:07:14 +05:30
myStructure = constitutive_nonlocal_structure ( i )
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
!*** sanity checks
2009-08-11 22:01:57 +05:30
2012-02-10 13:28:33 +05:30
if ( myStructure < 1 . or . myStructure > 3 ) call IO_error ( 205_pInt )
if ( sum ( constitutive_nonlocal_Nslip ( : , i ) ) < = 0_pInt ) call IO_error ( 235_pInt , ext_msg = 'Nslip' )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
do o = 1 , maxval ( phase_Noutput )
2012-02-10 13:28:33 +05:30
if ( len ( constitutive_nonlocal_output ( o , i ) ) > 64 ) call IO_error ( 666_pInt )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
enddo
2009-08-12 16:52:02 +05:30
do f = 1 , lattice_maxNslipFamily
2009-09-18 21:07:14 +05:30
if ( constitutive_nonlocal_Nslip ( f , i ) > 0_pInt ) then
2012-02-10 13:28:33 +05:30
if ( constitutive_nonlocal_rhoSglEdgePos0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoSglEdgePos0' )
if ( constitutive_nonlocal_rhoSglEdgeNeg0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoSglEdgeNeg0' )
if ( constitutive_nonlocal_rhoSglScrewPos0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoSglScrewPos0' )
if ( constitutive_nonlocal_rhoSglScrewNeg0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoSglScrewNeg0' )
if ( constitutive_nonlocal_rhoDipEdge0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoDipEdge0' )
if ( constitutive_nonlocal_rhoDipScrew0 ( f , i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoDipScrew0' )
if ( constitutive_nonlocal_burgersPerSlipFamily ( f , i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'burgers' )
if ( constitutive_nonlocal_lambda0PerSlipFamily ( f , i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'lambda0' )
2012-02-10 13:20:29 +05:30
if ( constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( f , 1 , i ) < = 0.0_pReal ) &
2012-02-10 13:28:33 +05:30
call IO_error ( 235_pInt , ext_msg = 'minimumDipoleHeightEdge' )
2012-02-10 13:20:29 +05:30
if ( constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( f , 2 , i ) < = 0.0_pReal ) &
2012-02-10 13:28:33 +05:30
call IO_error ( 235_pInt , ext_msg = 'minimumDipoleHeightScrew' )
if ( constitutive_nonlocal_peierlsStressPerSlipFamily ( f , 1 , i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'peierlsStressEdge' )
if ( constitutive_nonlocal_peierlsStressPerSlipFamily ( f , 2 , i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'peierlsStressScrew' )
2009-08-12 16:52:02 +05:30
endif
enddo
2012-02-10 13:20:29 +05:30
if ( any ( constitutive_nonlocal_interactionSlipSlip ( 1 : maxval ( lattice_interactionSlipSlip ( : , : , myStructure ) ) , i ) < 0.0_pReal ) ) &
2012-02-10 13:28:33 +05:30
call IO_error ( 235_pInt , ext_msg = 'interaction_SlipSlip' )
if ( constitutive_nonlocal_R ( i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'r' )
if ( constitutive_nonlocal_atomicVolume ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'atomicVolume' )
if ( constitutive_nonlocal_Dsd0 ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'selfDiffusionPrefactor' )
if ( constitutive_nonlocal_Qsd ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'selfDiffusionEnergy' )
if ( constitutive_nonlocal_aTolRho ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'aTol_rho' )
if ( constitutive_nonlocal_doublekinkwidth ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'doublekinkwidth' )
if ( constitutive_nonlocal_solidSolutionEnergy ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'solidSolutionEnergy' )
if ( constitutive_nonlocal_solidSolutionSize ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'solidSolutionSize' )
if ( constitutive_nonlocal_solidSolutionConcentration ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'solidSolutionConcentration' )
if ( constitutive_nonlocal_p ( i ) < = 0.0_pReal . or . constitutive_nonlocal_p ( i ) > 1.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'p' )
if ( constitutive_nonlocal_q ( i ) < 1.0_pReal . or . constitutive_nonlocal_q ( i ) > 2.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'q' )
if ( constitutive_nonlocal_viscosity ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'viscosity' )
if ( constitutive_nonlocal_fattack ( i ) < = 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'attackFrequency' )
if ( constitutive_nonlocal_rhoSglScatter ( i ) < 0.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'rhoSglScatter' )
2012-02-10 13:20:29 +05:30
if ( constitutive_nonlocal_surfaceTransmissivity ( i ) < 0.0_pReal &
2012-02-10 13:28:33 +05:30
. or . constitutive_nonlocal_surfaceTransmissivity ( i ) > 1.0_pReal ) call IO_error ( 235_pInt , ext_msg = 'surfaceTransmissivity' )
2011-01-26 15:47:42 +05:30
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
!*** determine total number of active slip systems
2009-08-11 22:01:57 +05:30
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_Nslip ( 1 : lattice_maxNslipFamily , i ) = min ( lattice_NslipSystem ( 1 : lattice_maxNslipFamily , myStructure ) , &
constitutive_nonlocal_Nslip ( 1 : lattice_maxNslipFamily , i ) ) ! we can't use more slip systems per family than specified in lattice
constitutive_nonlocal_totalNslip ( i ) = sum ( constitutive_nonlocal_Nslip ( 1 : lattice_maxNslipFamily , i ) )
2009-08-11 22:01:57 +05:30
enddo
!*** allocation of variables whose size depends on the total number of active slip systems
maxTotalNslip = maxval ( constitutive_nonlocal_totalNslip )
2009-08-28 19:20:47 +05:30
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_burgers ( maxTotalNslip , maxNinstance ) )
constitutive_nonlocal_burgers = 0.0_pReal
2009-08-28 19:20:47 +05:30
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_lambda0 ( maxTotalNslip , maxNinstance ) )
constitutive_nonlocal_lambda0 = 0.0_pReal
2009-08-28 19:20:47 +05:30
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_minimumDipoleHeight ( maxTotalNslip , 2 , maxNinstance ) )
constitutive_nonlocal_minimumDipoleHeight = 0.0_pReal
2011-01-26 15:47:42 +05:30
2009-08-11 22:01:57 +05:30
allocate ( constitutive_nonlocal_forestProjectionEdge ( maxTotalNslip , maxTotalNslip , maxNinstance ) )
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_forestProjectionEdge = 0.0_pReal
2009-08-11 22:01:57 +05:30
allocate ( constitutive_nonlocal_forestProjectionScrew ( maxTotalNslip , maxTotalNslip , maxNinstance ) )
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_forestProjectionScrew = 0.0_pReal
2009-08-11 22:01:57 +05:30
allocate ( constitutive_nonlocal_interactionMatrixSlipSlip ( maxTotalNslip , maxTotalNslip , maxNinstance ) )
2009-08-28 19:20:47 +05:30
constitutive_nonlocal_interactionMatrixSlipSlip = 0.0_pReal
2011-08-02 16:47:45 +05:30
allocate ( constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , maxTotalNslip , maxNinstance ) )
constitutive_nonlocal_lattice2slip = 0.0_pReal
2011-11-09 14:52:52 +05:30
allocate ( constitutive_nonlocal_accumulatedShear ( maxTotalNslip , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) )
constitutive_nonlocal_accumulatedShear = 0.0_pReal
2011-02-09 13:58:47 +05:30
allocate ( constitutive_nonlocal_rhoDotFlux ( maxTotalNslip , 10 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) )
2010-03-10 15:19:40 +05:30
constitutive_nonlocal_rhoDotFlux = 0.0_pReal
2010-10-15 18:49:26 +05:30
allocate ( constitutive_nonlocal_compatibility ( 2 , maxTotalNslip , maxTotalNslip , FE_maxNipNeighbors , mesh_maxNips , mesh_NcpElems ) )
2010-10-12 18:38:54 +05:30
constitutive_nonlocal_compatibility = 0.0_pReal
2012-01-25 22:34:37 +05:30
allocate ( constitutive_nonlocal_peierlsStress ( maxTotalNslip , 2 , maxNinstance ) )
constitutive_nonlocal_peierlsStress = 0.0_pReal
2009-08-11 22:01:57 +05:30
do i = 1 , maxNinstance
myStructure = constitutive_nonlocal_structure ( i ) ! lattice structure of this instance
2011-03-29 12:57:19 +05:30
!*** Inverse lookup of my slip system family and the slip system in lattice
2009-08-11 22:01:57 +05:30
l = 0_pInt
do f = 1 , lattice_maxNslipFamily
do s = 1 , constitutive_nonlocal_Nslip ( f , i )
l = l + 1
constitutive_nonlocal_slipFamily ( l , i ) = f
constitutive_nonlocal_slipSystemLattice ( l , i ) = sum ( lattice_NslipSystem ( 1 : f - 1 , myStructure ) ) + s
enddo ; enddo
2011-03-29 12:57:19 +05:30
!*** determine size of state array
2009-08-11 22:01:57 +05:30
2009-09-18 21:07:14 +05:30
ns = constitutive_nonlocal_totalNslip ( i )
constitutive_nonlocal_sizeDotState ( i ) = size ( constitutive_nonlocal_listBasicStates ) * ns
2012-01-17 15:56:57 +05:30
constitutive_nonlocal_sizeDependentState ( i ) = size ( constitutive_nonlocal_listDependentStates ) * ns
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_sizeState ( i ) = constitutive_nonlocal_sizeDotState ( i ) &
+ constitutive_nonlocal_sizeDependentState ( i ) &
+ size ( constitutive_nonlocal_listOtherStates ) * ns
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
!*** determine size of postResults array
2009-08-11 22:01:57 +05:30
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
do o = 1 , maxval ( phase_Noutput )
2009-08-11 22:01:57 +05:30
select case ( constitutive_nonlocal_output ( o , i ) )
2009-08-24 13:46:01 +05:30
case ( 'rho' , &
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
'delta' , &
2009-08-24 13:46:01 +05:30
'rho_edge' , &
'rho_screw' , &
2010-01-05 21:37:24 +05:30
'rho_sgl' , &
'delta_sgl' , &
'rho_sgl_edge' , &
'rho_sgl_edge_pos' , &
'rho_sgl_edge_neg' , &
'rho_sgl_screw' , &
'rho_sgl_screw_pos' , &
'rho_sgl_screw_neg' , &
'rho_sgl_mobile' , &
'rho_sgl_edge_mobile' , &
'rho_sgl_edge_pos_mobile' , &
'rho_sgl_edge_neg_mobile' , &
'rho_sgl_screw_mobile' , &
'rho_sgl_screw_pos_mobile' , &
'rho_sgl_screw_neg_mobile' , &
'rho_sgl_immobile' , &
'rho_sgl_edge_immobile' , &
'rho_sgl_edge_pos_immobile' , &
'rho_sgl_edge_neg_immobile' , &
'rho_sgl_screw_immobile' , &
'rho_sgl_screw_pos_immobile' , &
'rho_sgl_screw_neg_immobile' , &
'rho_dip' , &
'delta_dip' , &
'rho_dip_edge' , &
'rho_dip_screw' , &
2009-08-28 19:20:47 +05:30
'excess_rho' , &
2009-08-24 13:46:01 +05:30
'excess_rho_edge' , &
'excess_rho_screw' , &
'rho_forest' , &
'shearrate' , &
'resolvedstress' , &
2010-02-17 18:51:36 +05:30
'resolvedstress_external' , &
2012-01-17 15:56:57 +05:30
'resolvedstress_back' , &
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
'resistance' , &
'rho_dot' , &
2010-01-05 21:37:24 +05:30
'rho_dot_sgl' , &
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
'rho_dot_dip' , &
'rho_dot_gen' , &
2010-01-05 21:37:24 +05:30
'rho_dot_gen_edge' , &
'rho_dot_gen_screw' , &
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
'rho_dot_sgl2dip' , &
'rho_dot_ann_ath' , &
'rho_dot_ann_the' , &
2010-03-10 15:19:40 +05:30
'rho_dot_flux' , &
2010-05-21 14:21:15 +05:30
'rho_dot_flux_edge' , &
'rho_dot_flux_screw' , &
2012-01-26 13:13:36 +05:30
'velocity_edge_pos' , &
'velocity_edge_neg' , &
'velocity_screw_pos' , &
'velocity_screw_neg' , &
2010-02-17 18:51:36 +05:30
'fluxdensity_edge_pos_x' , &
'fluxdensity_edge_pos_y' , &
'fluxdensity_edge_pos_z' , &
'fluxdensity_edge_neg_x' , &
'fluxdensity_edge_neg_y' , &
'fluxdensity_edge_neg_z' , &
'fluxdensity_screw_pos_x' , &
'fluxdensity_screw_pos_y' , &
'fluxdensity_screw_pos_z' , &
'fluxdensity_screw_neg_x' , &
'fluxdensity_screw_neg_y' , &
'fluxdensity_screw_neg_z' , &
2012-01-26 18:20:04 +05:30
'maximumdipoleheight_edge' , &
'maximumdipoleheight_screw' , &
2011-11-09 14:52:52 +05:30
'accumulatedshear' )
2009-08-11 22:01:57 +05:30
mySize = constitutive_nonlocal_totalNslip ( i )
2012-01-17 15:56:57 +05:30
case ( 'dislocationstress' )
2011-09-07 17:00:28 +05:30
mySize = 6_pInt
2009-08-11 22:01:57 +05:30
case default
2012-01-25 22:34:37 +05:30
call IO_error ( 237 , ext_msg = constitutive_nonlocal_output ( o , i ) )
2009-08-11 22:01:57 +05:30
end select
if ( mySize > 0_pInt ) then ! any meaningful output found
constitutive_nonlocal_sizePostResult ( o , i ) = mySize
constitutive_nonlocal_sizePostResults ( i ) = constitutive_nonlocal_sizePostResults ( i ) + mySize
endif
enddo
2011-03-29 12:57:19 +05:30
!*** elasticity matrix and shear modulus according to material.config
2009-08-11 22:01:57 +05:30
select case ( myStructure )
2012-02-13 19:48:07 +05:30
case ( 1_pInt : 2_pInt ) ! cubic(s)
forall ( k = 1_pInt : 3_pInt )
forall ( j = 1_pInt : 3_pInt ) constitutive_nonlocal_Cslip_66 ( k , j , i ) = constitutive_nonlocal_C12 ( i )
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_Cslip_66 ( k , k , i ) = constitutive_nonlocal_C11 ( i )
2012-02-13 19:48:07 +05:30
constitutive_nonlocal_Cslip_66 ( k + 3_pInt , k + 3_pInt , i ) = constitutive_nonlocal_C44 ( i )
2009-08-11 22:01:57 +05:30
end forall
2012-02-13 19:48:07 +05:30
case ( 3_pInt : ) ! all hex
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_Cslip_66 ( 1 , 1 , i ) = constitutive_nonlocal_C11 ( i )
constitutive_nonlocal_Cslip_66 ( 2 , 2 , i ) = constitutive_nonlocal_C11 ( i )
constitutive_nonlocal_Cslip_66 ( 3 , 3 , i ) = constitutive_nonlocal_C33 ( i )
constitutive_nonlocal_Cslip_66 ( 1 , 2 , i ) = constitutive_nonlocal_C12 ( i )
constitutive_nonlocal_Cslip_66 ( 2 , 1 , i ) = constitutive_nonlocal_C12 ( i )
constitutive_nonlocal_Cslip_66 ( 1 , 3 , i ) = constitutive_nonlocal_C13 ( i )
constitutive_nonlocal_Cslip_66 ( 3 , 1 , i ) = constitutive_nonlocal_C13 ( i )
constitutive_nonlocal_Cslip_66 ( 2 , 3 , i ) = constitutive_nonlocal_C13 ( i )
constitutive_nonlocal_Cslip_66 ( 3 , 2 , i ) = constitutive_nonlocal_C13 ( i )
constitutive_nonlocal_Cslip_66 ( 4 , 4 , i ) = constitutive_nonlocal_C44 ( i )
constitutive_nonlocal_Cslip_66 ( 5 , 5 , i ) = constitutive_nonlocal_C44 ( i )
constitutive_nonlocal_Cslip_66 ( 6 , 6 , i ) = 0.5_pReal * ( constitutive_nonlocal_C11 ( i ) - constitutive_nonlocal_C12 ( i ) )
end select
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_Cslip_66 ( 1 : 6 , 1 : 6 , i ) = math_Mandel3333to66 ( math_Voigt66to3333 ( constitutive_nonlocal_Cslip_66 ( 1 : 6 , 1 : 6 , i ) ) )
constitutive_nonlocal_Cslip_3333 ( 1 : 3 , 1 : 3 , 1 : 3 , 1 : 3 , i ) = math_Voigt66to3333 ( constitutive_nonlocal_Cslip_66 ( 1 : 6 , 1 : 6 , i ) )
2009-08-11 22:01:57 +05:30
2010-06-07 20:02:23 +05:30
constitutive_nonlocal_Gmod ( i ) = 0.2_pReal * ( constitutive_nonlocal_C11 ( i ) - constitutive_nonlocal_C12 ( i ) &
+ 3.0_pReal * constitutive_nonlocal_C44 ( i ) ) ! (C11iso-C12iso)/2 with C11iso=(3*C11+2*C12+4*C44)/5 and C12iso=(C11+4*C12-2*C44)/5
constitutive_nonlocal_nu ( i ) = ( constitutive_nonlocal_C11 ( i ) + 4.0_pReal * constitutive_nonlocal_C12 ( i ) &
- 2.0_pReal * constitutive_nonlocal_C44 ( i ) ) &
/ ( 4.0_pReal * constitutive_nonlocal_C11 ( i ) + 6.0_pReal * constitutive_nonlocal_C12 ( i ) &
+ 2.0_pReal * constitutive_nonlocal_C44 ( i ) ) ! C12iso/(C11iso+C12iso) with C11iso=(3*C11+2*C12+4*C44)/5 and C12iso=(C11+4*C12-2*C44)/5
2009-08-11 22:01:57 +05:30
2012-02-13 19:48:07 +05:30
do s1 = 1_pInt , ns
2009-10-07 21:01:52 +05:30
f = constitutive_nonlocal_slipFamily ( s1 , i )
2009-08-12 16:52:02 +05:30
2011-03-29 12:57:19 +05:30
!*** burgers vector, mean free path prefactor and minimum dipole distance for each slip system
2009-08-11 22:01:57 +05:30
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_burgers ( s1 , i ) = constitutive_nonlocal_burgersPerSlipFamily ( f , i )
constitutive_nonlocal_lambda0 ( s1 , i ) = constitutive_nonlocal_lambda0PerSlipFamily ( f , i )
constitutive_nonlocal_minimumDipoleHeight ( s1 , 1 : 2 , i ) = constitutive_nonlocal_minimumDipoleHeightPerSlipFamily ( f , 1 : 2 , i )
constitutive_nonlocal_peierlsStress ( s1 , 1 : 2 , i ) = constitutive_nonlocal_peierlsStressPerSlipFamily ( f , 1 : 2 , i )
2009-10-07 21:01:52 +05:30
do s2 = 1 , ns
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
!*** calculation of forest projections for edge and screw dislocations. s2 acts as forest for s1
2009-10-07 21:01:52 +05:30
2011-03-29 12:57:19 +05:30
constitutive_nonlocal_forestProjectionEdge ( s1 , s2 , i ) &
= abs ( math_mul3x3 ( lattice_sn ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s1 , i ) , myStructure ) , &
lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s2 , i ) , myStructure ) ) ) ! forest projection of edge dislocations is the projection of (t = b x n) onto the slip normal of the respective slip plane
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
constitutive_nonlocal_forestProjectionScrew ( s1 , s2 , i ) &
= abs ( math_mul3x3 ( lattice_sn ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s1 , i ) , myStructure ) , &
lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s2 , i ) , myStructure ) ) ) ! forest projection of screw dislocations is the projection of b onto the slip normal of the respective splip plane
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
!*** calculation of interaction matrices
2009-10-07 21:01:52 +05:30
2011-03-29 12:57:19 +05:30
constitutive_nonlocal_interactionMatrixSlipSlip ( s1 , s2 , i ) &
= constitutive_nonlocal_interactionSlipSlip ( lattice_interactionSlipSlip ( constitutive_nonlocal_slipSystemLattice ( s1 , i ) , &
constitutive_nonlocal_slipSystemLattice ( s2 , i ) , &
2012-02-13 19:48:07 +05:30
myStructure ) , i )
2011-03-29 12:57:19 +05:30
enddo
2011-08-02 16:47:45 +05:30
!*** rotation matrix from lattice configuration to slip system
constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s1 , i ) &
2012-02-13 19:48:07 +05:30
= math_transpose33 ( reshape ( [ lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s1 , i ) , myStructure ) , &
2012-01-26 19:20:00 +05:30
- lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s1 , i ) , myStructure ) , &
2012-02-13 19:48:07 +05:30
lattice_sn ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( s1 , i ) , myStructure ) ] , [ 3 , 3 ] ) )
2011-03-29 12:57:19 +05:30
enddo
2009-08-11 22:01:57 +05:30
enddo
endsubroutine
!*********************************************************************
!* initial microstructural state (just the "basic" states) *
!*********************************************************************
2011-02-04 21:11:32 +05:30
function constitutive_nonlocal_stateInit ( myInstance )
2009-08-11 22:01:57 +05:30
use prec , only : pReal , &
pInt
use lattice , only : lattice_maxNslipFamily
2011-02-04 21:11:32 +05:30
use math , only : math_sampleGaussVar
2009-08-11 22:01:57 +05:30
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: myInstance ! number specifying the current instance of the constitution
!*** output variables
real ( pReal ) , dimension ( constitutive_nonlocal_sizeState ( myInstance ) ) :: &
constitutive_nonlocal_stateInit
!*** local variables
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( myInstance ) ) :: &
2010-01-05 21:37:24 +05:30
rhoSglEdgePos , & ! positive edge dislocation density
rhoSglEdgeNeg , & ! negative edge dislocation density
rhoSglScrewPos , & ! positive screw dislocation density
rhoSglScrewNeg , & ! negative screw dislocation density
rhoSglEdgePosUsed , & ! used positive edge dislocation density
rhoSglEdgeNegUsed , & ! used negative edge dislocation density
rhoSglScrewPosUsed , & ! used positive screw dislocation density
rhoSglScrewNegUsed , & ! used negative screw dislocation density
rhoDipEdge , & ! edge dipole dislocation density
2011-04-13 19:46:22 +05:30
rhoDipScrew ! screw dipole dislocation density
2009-08-11 22:01:57 +05:30
integer ( pInt ) ns , & ! short notation for total number of active slip systems
f , & ! index of lattice family
2009-10-07 21:01:52 +05:30
from , &
upto , &
2011-02-04 21:11:32 +05:30
s , & ! index of slip system
i
real ( pReal ) , dimension ( 2 ) :: noise
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_stateInit = 0.0_pReal
ns = constitutive_nonlocal_totalNslip ( myInstance )
!*** set the basic state variables
do f = 1 , lattice_maxNslipFamily
2011-02-04 21:11:32 +05:30
from = 1 + sum ( constitutive_nonlocal_Nslip ( 1 : f - 1 , myInstance ) )
2009-10-07 21:01:52 +05:30
upto = sum ( constitutive_nonlocal_Nslip ( 1 : f , myInstance ) )
2011-02-04 21:11:32 +05:30
do s = from , upto
do i = 1 , 2
noise ( i ) = math_sampleGaussVar ( 0.0_pReal , constitutive_nonlocal_rhoSglScatter ( myInstance ) )
enddo
rhoSglEdgePos ( s ) = constitutive_nonlocal_rhoSglEdgePos0 ( f , myInstance ) + noise ( 1 )
rhoSglEdgeNeg ( s ) = constitutive_nonlocal_rhoSglEdgeNeg0 ( f , myInstance ) + noise ( 1 )
rhoSglScrewPos ( s ) = constitutive_nonlocal_rhoSglScrewPos0 ( f , myInstance ) + noise ( 2 )
rhoSglScrewNeg ( s ) = constitutive_nonlocal_rhoSglScrewNeg0 ( f , myInstance ) + noise ( 2 )
enddo
2010-01-05 21:37:24 +05:30
rhoSglEdgePosUsed ( from : upto ) = 0.0_pReal
rhoSglEdgeNegUsed ( from : upto ) = 0.0_pReal
rhoSglScrewPosUsed ( from : upto ) = 0.0_pReal
rhoSglScrewNegUsed ( from : upto ) = 0.0_pReal
rhoDipEdge ( from : upto ) = constitutive_nonlocal_rhoDipEdge0 ( f , myInstance )
rhoDipScrew ( from : upto ) = constitutive_nonlocal_rhoDipScrew0 ( f , myInstance )
2009-08-28 19:20:47 +05:30
enddo
2009-08-11 22:01:57 +05:30
!*** put everything together and in right order
2010-01-05 21:37:24 +05:30
constitutive_nonlocal_stateInit ( 1 : ns ) = rhoSglEdgePos
constitutive_nonlocal_stateInit ( ns + 1 : 2 * ns ) = rhoSglEdgeNeg
constitutive_nonlocal_stateInit ( 2 * ns + 1 : 3 * ns ) = rhoSglScrewPos
constitutive_nonlocal_stateInit ( 3 * ns + 1 : 4 * ns ) = rhoSglScrewNeg
constitutive_nonlocal_stateInit ( 4 * ns + 1 : 5 * ns ) = rhoSglEdgePosUsed
constitutive_nonlocal_stateInit ( 5 * ns + 1 : 6 * ns ) = rhoSglEdgeNegUsed
constitutive_nonlocal_stateInit ( 6 * ns + 1 : 7 * ns ) = rhoSglScrewPosUsed
constitutive_nonlocal_stateInit ( 7 * ns + 1 : 8 * ns ) = rhoSglScrewNegUsed
constitutive_nonlocal_stateInit ( 8 * ns + 1 : 9 * ns ) = rhoDipEdge
constitutive_nonlocal_stateInit ( 9 * ns + 1 : 10 * ns ) = rhoDipScrew
2009-08-11 22:01:57 +05:30
endfunction
2009-09-18 21:07:14 +05:30
!*********************************************************************
2010-10-26 18:46:37 +05:30
!* absolute state tolerance *
2009-09-18 21:07:14 +05:30
!*********************************************************************
2010-10-26 18:46:37 +05:30
pure function constitutive_nonlocal_aTolState ( myInstance )
2009-09-18 21:07:14 +05:30
use prec , only : pReal , &
pInt
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: myInstance ! number specifying the current instance of the constitution
!*** output variables
real ( pReal ) , dimension ( constitutive_nonlocal_sizeState ( myInstance ) ) :: &
2010-10-26 18:46:37 +05:30
constitutive_nonlocal_aTolState ! absolute state tolerance for the current instance of this constitution
2009-09-18 21:07:14 +05:30
!*** local variables
2010-10-26 18:46:37 +05:30
constitutive_nonlocal_aTolState = constitutive_nonlocal_aTolRho ( myInstance )
2009-09-18 21:07:14 +05:30
endfunction
2009-08-11 22:01:57 +05:30
!*********************************************************************
!* calculates homogenized elacticity matrix *
!*********************************************************************
pure function constitutive_nonlocal_homogenizedC ( state , g , ip , el )
use prec , only : pReal , &
pInt , &
p_vec
use mesh , only : mesh_NcpElems , &
mesh_maxNips
use material , only : homogenization_maxNgrains , &
material_phase , &
phase_constitutionInstance
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain ID
ip , & ! current integration point
el ! current element
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: state ! microstructural state
!*** output variables
real ( pReal ) , dimension ( 6 , 6 ) :: constitutive_nonlocal_homogenizedC ! homogenized elasticity matrix
!*** local variables
integer ( pInt ) myInstance ! current instance of this constitution
myInstance = phase_constitutionInstance ( material_phase ( g , ip , el ) )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_homogenizedC = constitutive_nonlocal_Cslip_66 ( 1 : 6 , 1 : 6 , myInstance )
2009-08-11 22:01:57 +05:30
endfunction
!*********************************************************************
!* calculates quantities characterizing the microstructure *
!*********************************************************************
2012-01-17 15:56:57 +05:30
subroutine constitutive_nonlocal_microstructure ( state , Temperature , Fe , Fp , g , ip , el )
2009-08-11 22:01:57 +05:30
use prec , only : pReal , &
pInt , &
p_vec
2011-03-29 13:04:33 +05:30
use IO , only : IO_error
use math , only : math_Mandel33to6 , &
2009-08-11 22:01:57 +05:30
math_mul33x33 , &
math_mul33x3 , &
2012-01-17 15:56:57 +05:30
math_mul3x3 , &
math_norm3 , &
2012-01-26 19:20:00 +05:30
math_inv33 , &
math_invert33 , &
math_transpose33 , &
2009-08-11 22:01:57 +05:30
pi
2011-03-21 16:01:17 +05:30
use debug , only : debug_verbosity , &
debug_selectiveDebugger , &
debug_g , &
debug_i , &
debug_e
2009-08-11 22:01:57 +05:30
use mesh , only : mesh_NcpElems , &
mesh_maxNips , &
mesh_element , &
2012-01-17 15:56:57 +05:30
FE_NipNeighbors , &
FE_maxNipNeighbors , &
mesh_ipNeighborhood , &
2011-02-25 13:40:11 +05:30
mesh_ipCenterOfGravity , &
2011-03-29 13:04:33 +05:30
mesh_ipVolume , &
2012-01-17 15:56:57 +05:30
mesh_ipAreaNormal
2009-08-11 22:01:57 +05:30
use material , only : homogenization_maxNgrains , &
material_phase , &
2010-10-12 18:38:54 +05:30
phase_localConstitution , &
2009-08-11 22:01:57 +05:30
phase_constitutionInstance
2011-03-29 13:04:33 +05:30
use lattice , only : lattice_sd , &
2009-08-11 22:01:57 +05:30
lattice_st
implicit none
!*** input variables
2011-03-29 13:04:33 +05:30
integer ( pInt ) , intent ( in ) :: g , & ! current grain ID
ip , & ! current integration point
el ! current element
real ( pReal ) , intent ( in ) :: Temperature ! temperature
2012-01-17 15:56:57 +05:30
real ( pReal ) , dimension ( 3 , 3 ) , intent ( in ) :: &
Fe , & ! elastic deformation gradient
Fp ! elastic deformation gradient
2009-08-11 22:01:57 +05:30
2011-11-04 18:42:17 +05:30
!*** input/output variables
2009-08-11 22:01:57 +05:30
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( inout ) :: &
2011-03-29 13:04:33 +05:30
state ! microstructural state
2011-11-04 18:42:17 +05:30
!*** output variables
2011-03-29 13:04:33 +05:30
2011-11-04 18:42:17 +05:30
!*** local variables
2011-03-29 13:04:33 +05:30
integer ( pInt ) neighboring_el , & ! element number of neighboring material point
neighboring_ip , & ! integration point of neighboring material point
instance , & ! my instance of this constitution
neighboring_instance , & ! instance of this constitution of neighboring material point
latticeStruct , & ! my lattice structure
neighboring_latticeStruct , & ! lattice structure of neighboring material point
phase , &
neighboring_phase , &
ns , & ! total number of active slip systems at my material point
neighboring_ns , & ! total number of active slip systems at neighboring material point
c , & ! index of dilsocation character (edge, screw)
s , & ! slip system index
t , & ! index of dilsocation type (e+, e-, s+, s-, used e+, used e-, used s+, used s-)
dir , &
2011-08-02 16:47:45 +05:30
side , &
2012-01-17 15:56:57 +05:30
n
integer ( pInt ) , dimension ( 2 ) :: neighbor
2011-03-29 13:04:33 +05:30
real ( pReal ) nu , & ! poisson's ratio
2012-01-17 15:56:57 +05:30
mu , &
b , &
detFe , &
detFp , &
FVsize , &
rhoExcessGradient
real ( pReal ) , dimension ( 2 ) :: rhoExcessGradient_over_rho , &
gradient , &
gradientDeads , &
gradientInter , &
gradientDistance , &
gradientDistanceDeads , &
gradientDistanceInter , &
rhoExcessAtSampledPoint
real ( pReal ) , dimension ( 3 ) :: ipCoords , &
2011-03-29 13:04:33 +05:30
neighboring_ipCoords
2012-01-17 15:56:57 +05:30
real ( pReal ) , dimension ( FE_maxNipNeighbors ) :: &
distance ! length of connection vector
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2011-03-29 13:04:33 +05:30
rhoForest , & ! forest dislocation density
2012-01-17 15:56:57 +05:30
tauBack , & ! back stress from pileup on same slip system
2011-04-13 19:46:22 +05:30
tauThreshold ! threshold shear stress
2012-01-17 15:56:57 +05:30
real ( pReal ) , dimension ( 3 , 2 ) :: rhoExcessDifferences , &
sampledPoint
real ( pReal ) , dimension ( 3 , 3 ) :: invFe , & ! inverse of elastic deformation gradient
invFp ! inverse of plastic deformation gradient
real ( pReal ) , dimension ( 3 , FE_maxNipNeighbors ) :: &
connection_latticeConf , &
areaNormal_latticeConf
real ( pReal ) , dimension ( 2 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
rhoExcess
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 2 ) :: &
rhoDip ! dipole dislocation density (edge, screw)
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 8 ) :: &
rhoSgl ! single dislocation density (edge+, edge-, screw+, screw-, used edge+, used edge-, used screw+, used screw-)
real ( pReal ) , dimension ( 3 , 3 , 2 ) :: connections
real ( pReal ) , dimension ( 2 , maxval ( constitutive_nonlocal_totalNslip ) , FE_maxNipNeighbors ) :: &
neighboring_rhoExcess ! excess density at neighboring material point
real ( pReal ) , dimension ( 3 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 2 ) :: &
m ! direction of dislocation motion
2011-09-07 17:00:28 +05:30
logical inversionError
2011-03-29 13:04:33 +05:30
2012-01-17 15:56:57 +05:30
2011-03-29 13:04:33 +05:30
phase = material_phase ( g , ip , el )
instance = phase_constitutionInstance ( phase )
latticeStruct = constitutive_nonlocal_structure ( instance )
ns = constitutive_nonlocal_totalNslip ( instance )
2009-08-11 22:01:57 +05:30
!*** get basic states
2011-09-07 17:00:28 +05:30
forall ( s = 1 : ns , t = 1 : 4 ) &
rhoSgl ( s , t ) = max ( state ( g , ip , el ) % p ( ( t - 1 ) * ns + s ) , 0.0_pReal ) ! ensure positive single mobile densities
forall ( t = 5 : 8 ) &
rhoSgl ( 1 : ns , t ) = state ( g , ip , el ) % p ( ( t - 1 ) * ns + 1 : t * ns )
forall ( s = 1 : ns , c = 1 : 2 ) &
rhoDip ( s , c ) = max ( state ( g , ip , el ) % p ( ( 7 + c ) * ns + s ) , 0.0_pReal ) ! ensure positive dipole densities
2009-08-11 22:01:57 +05:30
!*** calculate the forest dislocation density
2011-03-29 13:04:33 +05:30
!*** (= projection of screw and edge dislocations)
2009-08-11 22:01:57 +05:30
forall ( s = 1 : ns ) &
2011-03-29 13:04:33 +05:30
rhoForest ( s ) = dot_product ( ( sum ( abs ( rhoSgl ( 1 : ns , ( / 1 , 2 , 5 , 6 / ) ) ) , 2 ) + rhoDip ( 1 : ns , 1 ) ) , &
constitutive_nonlocal_forestProjectionEdge ( s , 1 : ns , instance ) ) &
+ dot_product ( ( sum ( abs ( rhoSgl ( 1 : ns , ( / 3 , 4 , 7 , 8 / ) ) ) , 2 ) + rhoDip ( 1 : ns , 2 ) ) , &
constitutive_nonlocal_forestProjectionScrew ( s , 1 : ns , instance ) )
2009-08-11 22:01:57 +05:30
2009-10-07 21:01:52 +05:30
2009-08-11 22:01:57 +05:30
!*** calculate the threshold shear stress for dislocation slip
forall ( s = 1 : ns ) &
2012-01-25 22:34:37 +05:30
tauThreshold ( s ) = constitutive_nonlocal_Gmod ( instance ) * constitutive_nonlocal_burgers ( s , instance ) &
2011-03-29 13:04:33 +05:30
* sqrt ( dot_product ( ( sum ( abs ( rhoSgl ) , 2 ) + sum ( abs ( rhoDip ) , 2 ) ) , &
constitutive_nonlocal_interactionMatrixSlipSlip ( s , 1 : ns , instance ) ) )
2009-08-28 19:20:47 +05:30
2009-08-11 22:01:57 +05:30
2009-08-28 19:20:47 +05:30
!*** calculate the dislocation stress of the neighboring excess dislocation densities
2011-03-29 13:04:33 +05:30
!*** zero for material points of local constitution
2012-01-17 15:56:57 +05:30
tauBack = 0.0_pReal
2009-08-11 22:01:57 +05:30
2011-03-29 13:04:33 +05:30
if ( . not . phase_localConstitution ( phase ) ) then
2012-01-26 19:20:00 +05:30
call math_invert33 ( Fe , invFe , detFe , inversionError )
call math_invert33 ( Fp , invFp , detFp , inversionError )
2011-03-29 13:04:33 +05:30
ipCoords = mesh_ipCenterOfGravity ( 1 : 3 , ip , el )
2012-01-17 15:56:57 +05:30
rhoExcess ( 1 , 1 : ns ) = rhoSgl ( 1 : ns , 1 ) - rhoSgl ( 1 : ns , 2 )
rhoExcess ( 2 , 1 : ns ) = rhoSgl ( 1 : ns , 3 ) - rhoSgl ( 1 : ns , 4 )
FVsize = mesh_ipVolume ( ip , el ) ** ( 1.0_pReal / 3.0_pReal )
nu = constitutive_nonlocal_nu ( instance )
mu = constitutive_nonlocal_Gmod ( instance )
2011-02-04 21:11:32 +05:30
2012-01-17 15:56:57 +05:30
!* loop through my neighborhood and get the connection vectors (in lattice frame) and the excess densities
do n = 1 , FE_NipNeighbors ( mesh_element ( 2 , el ) )
neighboring_el = mesh_ipNeighborhood ( 1 , n , ip , el )
neighboring_ip = mesh_ipNeighborhood ( 2 , n , ip , el )
2012-01-26 19:20:00 +05:30
areaNormal_latticeConf ( 1 : 3 , n ) = detFp * math_mul33x3 ( math_transpose33 ( invFp ) , mesh_ipAreaNormal ( 1 : 3 , n , ip , el ) ) ! calculate the normal of the interface in lattice configuration
2012-01-17 15:56:57 +05:30
areaNormal_latticeConf ( 1 : 3 , n ) = areaNormal_latticeConf ( 1 : 3 , n ) / math_norm3 ( areaNormal_latticeConf ( 1 : 3 , n ) ) ! normalize the surface normal to unit length
if ( neighboring_el > 0 . and . neighboring_ip > 0 ) then
2011-03-29 13:04:33 +05:30
neighboring_phase = material_phase ( g , neighboring_ip , neighboring_el )
neighboring_instance = phase_constitutionInstance ( neighboring_phase )
neighboring_latticeStruct = constitutive_nonlocal_structure ( neighboring_instance )
neighboring_ns = constitutive_nonlocal_totalNslip ( neighboring_instance )
2012-01-17 15:56:57 +05:30
neighboring_ipCoords = mesh_ipCenterOfGravity ( 1 : 3 , neighboring_ip , neighboring_el )
if ( . not . phase_localConstitution ( neighboring_phase ) &
. and . neighboring_latticeStruct == latticeStruct &
. and . neighboring_instance == instance ) then
if ( neighboring_ns == ns ) then
if ( neighboring_el / = el . or . neighboring_ip / = ip ) then
connection_latticeConf ( 1 : 3 , n ) = math_mul33x3 ( invFe , neighboring_ipCoords - ipCoords )
2012-02-13 19:48:07 +05:30
forall ( s = 1_pInt : ns , c = 1_pInt : 2_pInt ) &
neighboring_rhoExcess ( c , s , n ) = state ( g , neighboring_ip , neighboring_el ) % p ( ( 2_pInt * c - 2_pInt ) * ns + s ) & ! positive mobiles
- state ( g , neighboring_ip , neighboring_el ) % p ( ( 2_pInt * c - 1_pInt ) * ns + s ) ! negative mobiles
2012-01-17 15:56:57 +05:30
else
! thats myself! probably using periodic images
connection_latticeConf ( 1 : 3 , n ) = areaNormal_latticeConf ( 1 : 3 , n ) * FVsize
neighboring_rhoExcess ( 1 : 2 , 1 : ns , n ) = rhoExcess
endif
else
! different number of active slip systems
2012-02-13 19:48:07 +05:30
call IO_error ( - 1_pInt , ext_msg = 'different number of active slip systems in neighboring IPs of same crystal structure' )
2012-01-17 15:56:57 +05:30
endif
else
! local neighbor or different lattice structure or different constitution instance
connection_latticeConf ( 1 : 3 , n ) = math_mul33x3 ( invFe , neighboring_ipCoords - ipCoords )
neighboring_rhoExcess ( 1 : 2 , 1 : ns , n ) = rhoExcess
endif
else
! free surface
connection_latticeConf ( 1 : 3 , n ) = areaNormal_latticeConf ( 1 : 3 , n ) * FVsize
neighboring_rhoExcess ( 1 : 2 , 1 : ns , n ) = rhoExcess
endif
distance ( n ) = math_norm3 ( connection_latticeConf ( 1 : 3 , n ) )
enddo
!* loop through the slip systems
!* calculate the dislocation gradient in both directions of m with two different methods:
!* 1. gradient between central excess density and dead dislocations in central ip
!* 2. interpolate gradient from excess density in three neighboring ips
!* take the heigher gradient in both directions and do a weighted sum with weights according to the distance
m ( 1 : 3 , 1 : ns , 1 ) = lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , instance ) , latticeStruct )
m ( 1 : 3 , 1 : ns , 2 ) = - lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , instance ) , latticeStruct )
2011-03-29 13:04:33 +05:30
2012-01-17 15:56:57 +05:30
do s = 1 , ns
rhoExcessGradient_over_rho = 0.0_pReal
do c = 1 , 2
if ( rhoSgl ( s , 2 * c - 1 ) + rhoSgl ( s , 2 * c ) < 1.0_pReal ) then
cycle ! no siginificant density
endif
!* gradient from dead dislocations
2011-03-29 13:04:33 +05:30
2012-01-17 15:56:57 +05:30
gradientDeads = 0.0_pReal
if ( rhoSgl ( s , 2 * c + 3 ) > 0.0_pReal ) then ! positive deads
gradientDeads ( 1 ) = + 2.0_pReal * rhoSgl ( s , 2 * c + 3 ) / FVsize ! on positive side
else
gradientDeads ( 2 ) = - 2.0_pReal * rhoSgl ( s , 2 * c + 3 ) / FVsize ! on negative side
endif
if ( rhoSgl ( s , 2 * c + 4 ) > 0.0_pReal ) then ! negative deads
gradientDeads ( 2 ) = gradientDeads ( 2 ) + 2.0_pReal * rhoSgl ( s , 2 * c + 4 ) / FVsize ! on negative side
else
gradientDeads ( 1 ) = gradientDeads ( 1 ) - 2.0_pReal * rhoSgl ( s , 2 * c + 4 ) / FVsize ! on positive side
endif
gradientDistanceDeads ( 1 : 2 ) = 0.5_pReal * FVsize
2011-03-29 13:04:33 +05:30
2012-01-17 15:56:57 +05:30
!* gradient from interpolation
gradientInter = 0.0_pReal
rhoExcessDifferences = 0.0_pReal
connections = 0.0_pReal
gradientDistanceInter = 0.0_pReal
do dir = 1 , 3
if ( math_mul3x3 ( areaNormal_latticeConf ( 1 : 3 , 2 * dir - 1 ) , m ( 1 : 3 , s , c ) ) > 0.0_pReal ) then ! on positive side
neighbor ( 1 ) = 2 * dir - 1
neighbor ( 2 ) = 2 * dir
else ! on negative side
neighbor ( 1 ) = 2 * dir
neighbor ( 2 ) = 2 * dir - 1
endif
do side = 1 , 2
n = neighbor ( side )
rhoExcessDifferences ( dir , side ) = neighboring_rhoExcess ( c , s , n ) - rhoExcess ( c , s )
connections ( dir , 1 : 3 , side ) = connection_latticeConf ( 1 : 3 , n )
gradientDistanceInter ( side ) = gradientDistanceInter ( side ) &
+ ( math_mul3x3 ( connection_latticeConf ( 1 : 3 , n ) , m ( 1 : 3 , s , c ) ) ) ** 2.0_pReal / distance ( n )
enddo
enddo
sampledPoint ( 1 : 3 , 1 ) = + gradientDistanceInter ( 1 ) * m ( 1 : 3 , s , c )
sampledPoint ( 1 : 3 , 2 ) = - gradientDistanceInter ( 2 ) * m ( 1 : 3 , s , c )
do side = 1 , 2
2012-01-26 19:20:00 +05:30
rhoExcessAtSampledPoint ( side ) = math_mul3x3 ( math_mul33x3 ( math_inv33 ( connections ( 1 : 3 , 1 : 3 , side ) ) , &
2012-01-17 15:56:57 +05:30
rhoExcessDifferences ( 1 : 3 , side ) ) , &
sampledPoint ( 1 : 3 , side ) ) &
+ rhoExcess ( c , s )
enddo
gradientInter ( 1 ) = ( rhoExcessAtSampledPoint ( 1 ) - rhoExcess ( c , s ) ) / gradientDistanceInter ( 1 )
gradientInter ( 2 ) = ( rhoExcess ( c , s ) - rhoExcessAtSampledPoint ( 2 ) ) / gradientDistanceInter ( 2 )
!* take maximum of both gradients and mix contributions from both sides according to weighted distances
do dir = 1 , 2
if ( abs ( gradientDeads ( dir ) ) > abs ( gradientInter ( dir ) ) ) then
gradient ( dir ) = gradientDeads ( dir )
gradientDistance ( dir ) = gradientDistanceDeads ( dir )
else
gradient ( dir ) = gradientInter ( dir )
gradientDistance ( dir ) = gradientDistanceInter ( dir )
endif
enddo
rhoExcessGradient = ( gradient ( 1 ) * gradientDistance ( 2 ) + gradient ( 2 ) * gradientDistance ( 1 ) ) &
/ ( gradientDistance ( 1 ) + gradientDistance ( 2 ) )
!* excess gradient over density: in case of vanishing central total density we take the distance squared instead!!!
2011-08-02 16:47:45 +05:30
2012-01-17 15:56:57 +05:30
rhoExcessGradient_over_rho ( c ) = rhoExcessGradient / ( rhoSgl ( s , 2 * c - 1 ) + rhoSgl ( s , 2 * c ) )
enddo
2012-01-25 22:34:37 +05:30
b = constitutive_nonlocal_burgers ( s , instance )
2012-01-17 15:56:57 +05:30
tauBack ( s ) = - mu * b / ( 2.0_pReal * pi ) * ( rhoExcessGradient_over_rho ( 1 ) / ( 1.0_pReal - nu ) + rhoExcessGradient_over_rho ( 2 ) )
2011-03-29 13:04:33 +05:30
2012-01-17 15:56:57 +05:30
enddo
endif
2011-03-29 13:04:33 +05:30
2011-05-26 15:05:42 +05:30
2012-01-17 15:56:57 +05:30
!*** set dependent states
2009-08-11 22:01:57 +05:30
2010-01-05 21:37:24 +05:30
state ( g , ip , el ) % p ( 10 * ns + 1 : 11 * ns ) = rhoForest
2010-02-17 18:51:36 +05:30
state ( g , ip , el ) % p ( 11 * ns + 1 : 12 * ns ) = tauThreshold
2012-01-17 15:56:57 +05:30
state ( g , ip , el ) % p ( 12 * ns + 1 : 13 * ns ) = tauBack
2009-08-11 22:01:57 +05:30
2011-03-29 12:57:19 +05:30
#ifndef _OPENMP
if ( debug_verbosity > 6 . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,i8,1x,i2,1x,i1)' ) '<< CONST >> nonlocal_microstructure at el ip g' , el , ip , g
2011-03-29 12:57:19 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,12x,12(e10.3,1x))' ) '<< CONST >> rhoForest' , rhoForest
write ( 6 , '(a,/,12x,12(f10.5,1x))' ) '<< CONST >> tauThreshold / MPa' , tauThreshold / 1e6
write ( 6 , '(a,/,12x,12(f10.5,1x))' ) '<< CONST >> tauBack / MPa' , tauBack / 1e6
2011-03-29 12:57:19 +05:30
endif
#endif
2010-02-17 18:51:36 +05:30
endsubroutine
!*********************************************************************
!* calculates kinetics *
!*********************************************************************
2012-01-25 22:34:37 +05:30
subroutine constitutive_nonlocal_kinetics ( v , tau , c , Temperature , state , g , ip , el , dv_dtau )
2010-02-17 18:51:36 +05:30
use prec , only : pReal , &
pInt , &
p_vec
2011-03-21 16:01:17 +05:30
use debug , only : debug_verbosity , &
debug_selectiveDebugger , &
2010-11-03 22:52:48 +05:30
debug_g , &
debug_i , &
debug_e
2010-02-17 18:51:36 +05:30
use mesh , only : mesh_NcpElems , &
mesh_maxNips
use material , only : homogenization_maxNgrains , &
material_phase , &
phase_constitutionInstance
use lattice , only : lattice_Sslip , &
lattice_Sslip_v
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain number
ip , & ! current integration point
2012-01-25 22:34:37 +05:30
el , & ! current element number
c ! dislocation character (1:edge, 2:screw)
2010-02-17 18:51:36 +05:30
real ( pReal ) , intent ( in ) :: Temperature ! temperature
2012-01-25 22:34:37 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) , &
intent ( in ) :: tau ! resolved external shear stress (for bcc this already contains non Schmid effects)
type ( p_vec ) , intent ( in ) :: state ! microstructural state
2010-02-17 18:51:36 +05:30
2011-11-04 18:42:17 +05:30
!*** input/output variables
2010-02-17 18:51:36 +05:30
!*** output variables
2012-01-25 22:34:37 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) , &
2011-11-04 18:42:17 +05:30
intent ( out ) :: v ! velocity
2012-01-25 22:34:37 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) , &
2010-10-01 17:48:49 +05:30
intent ( out ) , optional :: dv_dtau ! velocity derivative with respect to resolved shear stress
2010-02-17 18:51:36 +05:30
!*** local variables
2012-02-03 18:20:54 +05:30
integer ( pInt ) instance , & ! current instance of this constitution
2010-02-17 18:51:36 +05:30
ns , & ! short notation for the total number of active slip systems
2012-01-25 22:34:37 +05:30
s ! index of my current slip system
2010-02-17 18:51:36 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2012-02-03 18:20:54 +05:30
tauThreshold ! threshold shear stress
real ( pReal ) tauRel_P , &
tauRel_S , &
2012-01-25 22:34:37 +05:30
tPeierls , & ! waiting time in front of a peierls barriers
2012-02-03 18:20:54 +05:30
tSolidSolution , & ! waiting time in front of a solid solution obstacle
vViscous , & ! viscous glide velocity
2012-01-25 22:34:37 +05:30
dtPeierls_dtau , & ! derivative with respect to resolved shear stress
2012-02-03 18:20:54 +05:30
dtSolidSolution_dtau , & ! derivative with respect to resolved shear stress
2012-01-25 22:34:37 +05:30
p , & ! shortcut to Kocks,Argon,Ashby parameter p
2012-02-03 18:20:54 +05:30
q , & ! shortcut to Kocks,Argon,Ashby parameter q
meanfreepath_S , & ! mean free travel distance for dislocations between two solid solution obstacles
meanfreepath_P , & ! mean free travel distance for dislocations between two Peierls barriers
jumpWidth_P , & ! depth of activated area
jumpWidth_S , & ! depth of activated area
activationLength_P , & ! length of activated dislocation line
activationLength_S , & ! length of activated dislocation line
activationVolume_P , & ! volume that needs to be activated to overcome barrier
activationVolume_S , & ! volume that needs to be activated to overcome barrier
activationEnergy_P , & ! energy that is needed to overcome barrier
activationEnergy_S , & ! energy that is needed to overcome barrier
criticalStress_P , & ! maximum obstacle strength
criticalStress_S , & ! maximum obstacle strength
mobility ! dislocation mobility
instance = phase_constitutionInstance ( material_phase ( g , ip , el ) )
ns = constitutive_nonlocal_totalNslip ( instance )
2010-02-17 18:51:36 +05:30
2010-10-26 19:12:18 +05:30
tauThreshold = state % p ( 11 * ns + 1 : 12 * ns )
2012-01-25 22:34:37 +05:30
2012-02-03 18:20:54 +05:30
p = constitutive_nonlocal_p ( instance )
q = constitutive_nonlocal_q ( instance )
2010-02-17 18:51:36 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
v = 0.0_pReal
2010-10-01 17:48:49 +05:30
if ( present ( dv_dtau ) ) dv_dtau = 0.0_pReal
2010-02-17 18:51:36 +05:30
2011-01-26 15:47:42 +05:30
if ( Temperature > 0.0_pReal ) then
2010-10-01 17:48:49 +05:30
do s = 1 , ns
2012-01-25 22:34:37 +05:30
if ( abs ( tau ( s ) ) > tauThreshold ( s ) ) then
2010-10-26 19:12:18 +05:30
2012-01-25 22:34:37 +05:30
!* Peierls contribution
!* The derivative only gives absolute values; the correct sign is taken care of in the formula for the derivative of the velocity
2012-02-03 18:20:54 +05:30
meanfreepath_P = constitutive_nonlocal_burgers ( s , instance )
jumpWidth_P = constitutive_nonlocal_burgers ( s , instance )
activationLength_P = constitutive_nonlocal_doublekinkwidth ( instance ) * constitutive_nonlocal_burgers ( s , instance )
activationVolume_P = activationLength_P * jumpWidth_P * constitutive_nonlocal_burgers ( s , instance )
criticalStress_P = constitutive_nonlocal_peierlsStress ( s , c , instance )
activationEnergy_P = criticalStress_P * activationVolume_P
tauRel_P = ( abs ( tau ( s ) ) - tauThreshold ( s ) ) / criticalStress_P
tPeierls = 1.0_pReal / constitutive_nonlocal_fattack ( instance ) &
* exp ( activationEnergy_P / ( kB * Temperature ) * ( 1.0_pReal - tauRel_P ** p ) ** q )
2011-01-26 15:47:42 +05:30
if ( present ( dv_dtau ) ) then
2012-02-03 18:20:54 +05:30
dtPeierls_dtau = tPeierls * p * q * activationVolume_P / ( kB * Temperature ) &
* ( 1.0_pReal - tauRel_P ** p ) ** ( q - 1.0_pReal ) * tauRel_P ** ( p - 1.0_pReal )
2011-01-26 15:47:42 +05:30
endif
2012-01-25 22:34:37 +05:30
!* Contribution from solid solution strengthening
!* The derivative only gives absolute values; the correct sign is taken care of in the formula for the derivative of the velocity
2012-02-03 18:20:54 +05:30
meanfreepath_S = constitutive_nonlocal_burgers ( s , instance ) / sqrt ( constitutive_nonlocal_solidSolutionConcentration ( instance ) )
jumpWidth_S = constitutive_nonlocal_solidSolutionSize ( instance ) * constitutive_nonlocal_burgers ( s , instance )
activationLength_S = constitutive_nonlocal_burgers ( s , instance ) &
/ sqrt ( constitutive_nonlocal_solidSolutionConcentration ( instance ) )
activationVolume_S = activationLength_S * jumpWidth_S * constitutive_nonlocal_burgers ( s , instance )
activationEnergy_S = constitutive_nonlocal_solidSolutionEnergy ( instance )
criticalStress_S = activationEnergy_S / activationVolume_S
tauRel_S = ( abs ( tau ( s ) ) - tauThreshold ( s ) ) / criticalStress_S
tSolidSolution = 1.0_pReal / constitutive_nonlocal_fattack ( instance ) &
* exp ( activationEnergy_S / ( kB * Temperature ) * ( 1.0_pReal - tauRel_S ** p ) ** q )
2012-01-25 22:34:37 +05:30
if ( present ( dv_dtau ) ) then
2012-02-03 18:20:54 +05:30
dtSolidSolution_dtau = tSolidSolution * p * q * activationVolume_S / ( kB * Temperature ) &
* ( 1.0_pReal - tauRel_S ** p ) ** ( q - 1.0_pReal ) * tauRel_S ** ( p - 1.0_pReal )
2012-01-25 22:34:37 +05:30
endif
2012-02-03 18:20:54 +05:30
!* viscous glide velocity
2012-01-25 22:34:37 +05:30
2012-02-03 18:20:54 +05:30
mobility = constitutive_nonlocal_burgers ( s , instance ) / constitutive_nonlocal_viscosity ( instance )
vViscous = mobility * abs ( tau ( s ) )
2012-01-25 22:34:37 +05:30
2012-02-03 18:20:54 +05:30
!* Mean velocity results from waiting time at peierls barriers and solid solution obstacles with respective meanfreepath of
!* free flight at glide velocity in between. Backward jumps at low stresses are considered only at peierls barriers,
!* since those have the smallest activation volume, thus are decisive.
2012-01-25 22:34:37 +05:30
2012-02-03 18:20:54 +05:30
v ( s ) = 1.0_pReal / ( tPeierls / meanfreepath_P + tSolidSolution / meanfreepath_S + 1.0_pReal / vViscous ) &
* ( 1.0_pReal - exp ( - ( abs ( tau ( s ) ) - tauThreshold ( s ) ) * activationVolume_P / ( kB * Temperature ) ) )
2012-01-25 22:34:37 +05:30
v ( s ) = sign ( v ( s ) , tau ( s ) )
if ( present ( dv_dtau ) ) then
2012-02-03 18:20:54 +05:30
dv_dtau ( s ) = 1.0_pReal / ( tPeierls / meanfreepath_P + tSolidSolution / meanfreepath_S + 1.0_pReal / vViscous ) &
* ( abs ( v ( s ) ) * ( dtPeierls_dtau + dtSolidSolution_dtau + 1.0_pReal / ( mobility * tau ( s ) * tau ( s ) ) ) &
+ activationVolume_P / ( kB * Temperature ) * exp ( - ( abs ( tau ( s ) ) - tauThreshold ( s ) ) * activationVolume_P &
/ ( kB * Temperature ) ) )
2012-01-25 22:34:37 +05:30
endif
2010-10-01 17:48:49 +05:30
endif
enddo
endif
2012-01-25 22:34:37 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2011-03-29 12:57:19 +05:30
#ifndef _OPENMP
if ( debug_verbosity > 6 . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
2011-03-21 16:01:17 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,i8,1x,i2,1x,i1)' ) '<< CONST >> nonlocal_kinetics at el ip g' , el , ip , g
2011-03-21 16:01:17 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,12x,12(f12.5,1x))' ) '<< CONST >> tau / MPa' , tau / 1e6_pReal
2012-02-03 18:20:54 +05:30
write ( 6 , '(a,/,12x,12(f12.5,1x))' ) '<< CONST >> v / 1e-3m/s' , v * 1e3
2011-03-29 12:57:19 +05:30
endif
#endif
2010-02-17 18:51:36 +05:30
2009-08-11 22:01:57 +05:30
endsubroutine
!*********************************************************************
!* calculates plastic velocity gradient and its tangent *
!*********************************************************************
2010-10-26 18:46:37 +05:30
subroutine constitutive_nonlocal_LpAndItsTangent ( Lp , dLp_dTstar99 , Tstar_v , Temperature , state , g , ip , el )
2009-08-11 22:01:57 +05:30
use prec , only : pReal , &
pInt , &
p_vec
use math , only : math_Plain3333to99 , &
2012-01-26 19:20:00 +05:30
math_mul6x6
2011-03-21 16:01:17 +05:30
use debug , only : debug_verbosity , &
debug_selectiveDebugger , &
2010-11-03 22:52:48 +05:30
debug_g , &
debug_i , &
debug_e
2009-08-11 22:01:57 +05:30
use mesh , only : mesh_NcpElems , &
mesh_maxNips
use material , only : homogenization_maxNgrains , &
material_phase , &
phase_constitutionInstance
use lattice , only : lattice_Sslip , &
lattice_Sslip_v
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain number
ip , & ! current integration point
el ! current element number
real ( pReal ) , intent ( in ) :: Temperature ! temperature
real ( pReal ) , dimension ( 6 ) , intent ( in ) :: Tstar_v ! 2nd Piola-Kirchhoff stress in Mandel notation
2011-11-04 18:42:17 +05:30
!*** input/output variables
type ( p_vec ) , intent ( inout ) :: state ! microstructural state
2009-08-11 22:01:57 +05:30
!*** output variables
real ( pReal ) , dimension ( 3 , 3 ) , intent ( out ) :: Lp ! plastic velocity gradient
real ( pReal ) , dimension ( 9 , 9 ) , intent ( out ) :: dLp_dTstar99 ! derivative of Lp with respect to Tstar (9x9 matrix)
!*** local variables
integer ( pInt ) myInstance , & ! current instance of this constitution
myStructure , & ! current lattice structure
ns , & ! short notation for the total number of active slip systems
2012-01-25 22:34:37 +05:30
c , &
2009-08-11 22:01:57 +05:30
i , &
j , &
k , &
l , &
t , & ! dislocation type
s , & ! index of my current slip system
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
sLattice ! index of my current slip system according to lattice order
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( 3 , 3 , 3 , 3 ) :: dLp_dTstar3333 ! derivative of Lp with respect to Tstar (3x3x3x3 matrix)
2010-02-17 18:51:36 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 4 ) :: &
2011-09-07 17:00:28 +05:30
rhoSgl , & ! single dislocation densities (including used)
2011-11-04 18:42:17 +05:30
v , & ! velocity
2011-09-07 17:00:28 +05:30
dv_dtau ! velocity derivative with respect to the shear stress
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2012-01-25 22:34:37 +05:30
tau , & ! resolved shear stress including non Schmid and backstress terms
2010-02-17 18:51:36 +05:30
gdotTotal , & ! shear rate
2012-01-25 22:34:37 +05:30
dgdotTotal_dtau , & ! derivative of the shear rate with respect to the shear stress
tauBack ! back stress from dislocation gradients on same slip system
2009-08-11 22:01:57 +05:30
!*** initialize local variables
Lp = 0.0_pReal
dLp_dTstar3333 = 0.0_pReal
myInstance = phase_constitutionInstance ( material_phase ( g , ip , el ) )
myStructure = constitutive_nonlocal_structure ( myInstance )
ns = constitutive_nonlocal_totalNslip ( myInstance )
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-11 22:01:57 +05:30
!*** shortcut to state variables
2011-09-07 17:00:28 +05:30
forall ( s = 1 : ns , t = 1 : 4 ) &
2011-11-04 18:42:17 +05:30
rhoSgl ( s , t ) = max ( state % p ( ( t - 1 ) * ns + s ) , 0.0_pReal )
2012-01-25 22:34:37 +05:30
tauBack = state % p ( 12 * ns + 1 : 13 * ns )
!*** get effective resolved shear stress
do s = 1 , ns
tau ( s ) = math_mul6x6 ( Tstar_v , lattice_Sslip_v ( : , constitutive_nonlocal_slipSystemLattice ( s , myInstance ) , myStructure ) ) &
+ tauBack ( s )
enddo
!*** get dislocation velocity and its tangent and store the velocity in the state array
2012-01-26 13:13:36 +05:30
if ( myStructure == 1_pInt ) then ! for fcc all velcities are equal
2012-02-13 19:48:07 +05:30
call constitutive_nonlocal_kinetics ( v ( 1 : ns , 1 ) , tau , 1_pInt , Temperature , state , g , ip , el , dv_dtau ( 1 : ns , 1 ) )
do t = 1_pInt , 4_pInt
2012-01-26 13:13:36 +05:30
v ( 1 : ns , t ) = v ( 1 : ns , 1 )
dv_dtau ( 1 : ns , t ) = dv_dtau ( 1 : ns , 1 )
2012-02-13 19:48:07 +05:30
state % p ( ( 12_pInt + t ) * ns + 1 : ( 13_pInt + t ) * ns ) = v ( 1 : ns , 1 )
2012-01-26 13:13:36 +05:30
enddo
else ! for all other lattice structures the velcities may vary with character and sign
2012-02-13 19:48:07 +05:30
do t = 1_pInt , 4_pInt
c = ( t - 1_pInt ) / 2_pInt + 1_pInt
2012-01-26 13:13:36 +05:30
call constitutive_nonlocal_kinetics ( v ( 1 : ns , t ) , tau , c , Temperature , state , g , ip , el , dv_dtau ( 1 : ns , t ) )
state % p ( ( 12 + t ) * ns + 1 : ( 13 + t ) * ns ) = v ( 1 : ns , t )
enddo
endif
2012-01-25 22:34:37 +05:30
!*** Bauschinger effect
2012-02-13 19:48:07 +05:30
forall ( s = 1_pInt : ns , t = 5_pInt : 8_pInt , state % p ( ( t - 1 ) * ns + s ) * v ( s , t - 4_pInt ) < 0.0_pReal ) &
rhoSgl ( s , t - 4_pInt ) = rhoSgl ( s , t - 4_pInt ) + abs ( state % p ( ( t - 1_pInt ) * ns + s ) )
2009-08-28 19:20:47 +05:30
!*** Calculation of gdot and its tangent
2012-01-25 22:34:37 +05:30
gdotTotal = sum ( rhoSgl * v , 2 ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance )
dgdotTotal_dtau = sum ( rhoSgl * dv_dtau , 2 ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance )
2009-08-28 19:20:47 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-28 19:20:47 +05:30
!*** Calculation of Lp and its tangent
2009-08-24 13:46:01 +05:30
do s = 1 , ns
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
sLattice = constitutive_nonlocal_slipSystemLattice ( s , myInstance )
2011-02-09 18:42:46 +05:30
Lp = Lp + gdotTotal ( s ) * lattice_Sslip ( 1 : 3 , 1 : 3 , sLattice , myStructure )
2009-08-11 22:01:57 +05:30
forall ( i = 1 : 3 , j = 1 : 3 , k = 1 : 3 , l = 1 : 3 ) &
2010-02-17 18:51:36 +05:30
dLp_dTstar3333 ( i , j , k , l ) = dLp_dTstar3333 ( i , j , k , l ) + dgdotTotal_dtau ( s ) * lattice_Sslip ( i , j , sLattice , myStructure ) &
* lattice_Sslip ( k , l , sLattice , myStructure )
2009-08-11 22:01:57 +05:30
enddo
2009-08-12 16:52:02 +05:30
dLp_dTstar99 = math_Plain3333to99 ( dLp_dTstar3333 )
2012-01-25 22:34:37 +05:30
2011-03-29 12:57:19 +05:30
#ifndef _OPENMP
if ( debug_verbosity > 6 . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
2011-03-21 16:01:17 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,i8,1x,i2,1x,i1)' ) '<< CONST >> nonlocal_LpandItsTangent at el ip g ' , el , ip , g
2011-03-21 16:01:17 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,12x,12(f12.5,1x))' ) '<< CONST >> gdot total / 1e-3' , gdotTotal * 1e3_pReal
write ( 6 , '(a,/,3(12x,3(f12.7,1x),/))' ) '<< CONST >> Lp' , Lp
2011-03-29 12:57:19 +05:30
endif
#endif
2009-08-11 22:01:57 +05:30
endsubroutine
!*********************************************************************
!* rate of change of microstructure *
!*********************************************************************
2011-02-25 15:23:20 +05:30
subroutine constitutive_nonlocal_dotState ( dotState , Tstar_v , Fe , Fp , Temperature , state , aTolState , timestep , orientation , g , ip , el )
2009-08-11 22:01:57 +05:30
use prec , only : pReal , &
pInt , &
2011-10-20 22:16:11 +05:30
p_vec , &
DAMASK_NaN
2011-02-24 15:31:41 +05:30
use numerics , only : numerics_integrationMode
2010-03-04 22:44:47 +05:30
use IO , only : IO_error
2011-03-21 16:01:17 +05:30
use debug , only : debug_verbosity , &
debug_selectiveDebugger , &
2010-11-03 22:52:48 +05:30
debug_g , &
debug_i , &
2011-03-21 16:01:17 +05:30
debug_e
2009-08-11 22:01:57 +05:30
use math , only : math_norm3 , &
math_mul6x6 , &
math_mul3x3 , &
math_mul33x3 , &
2009-10-07 21:01:52 +05:30
math_mul33x33 , &
2012-01-26 19:20:00 +05:30
math_inv33 , &
math_det33 , &
math_transpose33 , &
2011-10-20 22:16:11 +05:30
pi
2009-08-11 22:01:57 +05:30
use mesh , only : mesh_NcpElems , &
mesh_maxNips , &
2009-12-18 21:16:33 +05:30
mesh_maxNipNeighbors , &
2009-08-11 22:01:57 +05:30
mesh_element , &
FE_NipNeighbors , &
mesh_ipNeighborhood , &
mesh_ipVolume , &
mesh_ipArea , &
2010-03-04 22:44:47 +05:30
mesh_ipAreaNormal , &
mesh_ipCenterOfGravity
2009-08-11 22:01:57 +05:30
use material , only : homogenization_maxNgrains , &
material_phase , &
2010-03-04 22:44:47 +05:30
phase_constitutionInstance , &
2011-09-07 17:00:28 +05:30
phase_localConstitution , &
phase_constitution
2009-08-11 22:01:57 +05:30
use lattice , only : lattice_Sslip , &
lattice_Sslip_v , &
lattice_sd , &
lattice_sn , &
lattice_st , &
lattice_maxNslipFamily , &
2010-10-01 17:48:49 +05:30
lattice_NslipSystem
2010-10-26 19:12:18 +05:30
use FEsolving , only : theInc , &
FEsolving_execElem , &
FEsolving_execIP
2009-08-11 22:01:57 +05:30
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain number
ip , & ! current integration point
el ! current element number
2009-08-28 19:20:47 +05:30
real ( pReal ) , intent ( in ) :: Temperature , & ! temperature
2011-02-25 15:23:20 +05:30
timestep ! substepped crystallite time increment
real ( pReal ) , dimension ( 6 ) , intent ( in ) :: Tstar_v ! current 2nd Piola-Kirchhoff stress in Mandel notation
2009-10-07 21:01:52 +05:30
real ( pReal ) , dimension ( 3 , 3 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
Fe , & ! elastic deformation gradient
Fp ! plastic deformation gradient
2010-10-15 18:49:26 +05:30
real ( pReal ) , dimension ( 4 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
orientation ! crystal lattice orientation
2009-08-11 22:01:57 +05:30
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
2009-08-28 19:20:47 +05:30
state , & ! current microstructural state
2010-10-26 18:46:37 +05:30
aTolState ! absolute state tolerance
2009-08-11 22:01:57 +05:30
!*** input/output variables
2011-03-21 20:48:09 +05:30
type ( p_vec ) , intent ( inout ) :: dotState ! evolution of state variables / microstructure
2009-08-11 22:01:57 +05:30
!*** output variables
!*** local variables
integer ( pInt ) myInstance , & ! current instance of this constitution
myStructure , & ! current lattice structure
ns , & ! short notation for the total number of active slip systems
2009-08-28 19:20:47 +05:30
c , & ! character of dislocation
2009-08-11 22:01:57 +05:30
n , & ! index of my current neighbor
2010-10-26 19:12:18 +05:30
neighboring_el , & ! element number of my neighbor
neighboring_ip , & ! integration point of my neighbor
2011-02-16 22:05:38 +05:30
neighboring_n , & ! neighbor index pointing to me when looking from my neighbor
2010-03-24 21:53:21 +05:30
opposite_n , & ! index of my opposite neighbor
opposite_ip , & ! ip of my opposite neighbor
opposite_el , & ! element index of my opposite neighbor
2009-08-11 22:01:57 +05:30
t , & ! type of dislocation
2010-10-12 18:38:54 +05:30
topp , & ! type of dislocation with opposite sign to t
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
s , & ! index of my current slip system
2011-04-13 19:46:22 +05:30
sLattice ! index of my current slip system according to lattice order
2010-05-21 14:21:15 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 10 ) :: &
2011-02-16 22:05:38 +05:30
rhoDot , & ! density evolution
rhoDotRemobilization , & ! density evolution by remobilization
rhoDotMultiplication , & ! density evolution by multiplication
rhoDotFlux , & ! density evolution by flux
rhoDotSingle2DipoleGlide , & ! density evolution by dipole formation (by glide)
2010-05-21 14:21:15 +05:30
rhoDotAthermalAnnihilation , & ! density evolution by athermal annihilation
2011-02-25 15:23:20 +05:30
rhoDotThermalAnnihilation ! density evolution by thermal annihilation
2010-03-24 21:53:21 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 8 ) :: &
2011-02-25 15:23:20 +05:30
rhoSgl ! current single dislocation densities (positive/negative screw and edge without dipoles)
2009-08-28 19:20:47 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 4 ) :: &
2011-11-04 18:42:17 +05:30
v , & ! dislocation glide velocity
2011-02-16 22:05:38 +05:30
fluxdensity , & ! flux density at central material point
neighboring_fluxdensity , & ! flux density at neighboring material point
gdot ! shear rates
2009-08-11 22:01:57 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2011-02-16 22:05:38 +05:30
rhoForest , & ! forest dislocation density
tauThreshold , & ! threshold shear stress
tau , & ! current resolved shear stress
2012-01-17 15:56:57 +05:30
tauBack , & ! current back stress from pileups on same slip system
2011-02-16 22:05:38 +05:30
vClimb ! climb velocity of edge dipoles
2009-08-28 19:20:47 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 2 ) :: &
2011-02-16 22:05:38 +05:30
rhoDip , & ! current dipole dislocation densities (screw and edge dipoles)
dLower , & ! minimum stable dipole distance for edges and screws
2011-02-25 15:23:20 +05:30
dUpper ! current maximum stable dipole distance for edges and screws
2009-08-28 19:20:47 +05:30
real ( pReal ) , dimension ( 3 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 4 ) :: &
2011-02-16 22:05:38 +05:30
m ! direction of dislocation motion
real ( pReal ) , dimension ( 3 , 3 ) :: my_F , & ! my total deformation gradient
neighboring_F , & ! total deformation gradient of my neighbor
my_Fe , & ! my elastic deformation gradient
neighboring_Fe , & ! elastic deformation gradient of my neighbor
Favg ! average total deformation gradient of me and my neighbor
real ( pReal ) , dimension ( 3 ) :: normal_neighbor2me , & ! interface normal pointing from my neighbor to me in neighbor's lattice configuration
normal_neighbor2me_defConf , & ! interface normal pointing from my neighbor to me in shared deformed configuration
normal_me2neighbor , & ! interface normal pointing from me to my neighbor in my lattice configuration
normal_me2neighbor_defConf ! interface normal pointing from me to my neighbor in shared deformed configuration
real ( pReal ) area , & ! area of the current interface
transmissivity , & ! overall transmissivity of dislocation flux to neighboring material point
lineLength , & ! dislocation line length leaving the current interface
2011-04-13 19:46:22 +05:30
D ! self diffusion
2011-02-16 22:05:38 +05:30
logical considerEnteringFlux , &
considerLeavingFlux
2010-03-04 22:44:47 +05:30
2011-03-29 12:57:19 +05:30
#ifndef _OPENMP
2012-02-13 19:48:07 +05:30
if ( debug_verbosity > 6_pInt . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
2011-03-21 16:01:17 +05:30
write ( 6 , * )
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,i8,1x,i2,1x,i1)' ) '<< CONST >> nonlocal_dotState at el ip g ' , el , ip , g
2010-03-04 22:44:47 +05:30
write ( 6 , * )
2011-03-29 12:57:19 +05:30
endif
#endif
2009-12-15 13:50:31 +05:30
2010-08-20 04:30:26 +05:30
select case ( mesh_element ( 2 , el ) )
2012-02-13 19:48:07 +05:30
case ( 1_pInt , 6_pInt , 7_pInt , 8_pInt , 9_pInt )
2010-08-20 04:30:26 +05:30
! all fine
case default
2012-02-13 19:48:07 +05:30
call IO_error ( - 1_pInt , el , ip , g , 'element type not supported for nonlocal constitution' )
2010-08-20 04:30:26 +05:30
end select
2009-08-11 22:01:57 +05:30
myInstance = phase_constitutionInstance ( material_phase ( g , ip , el ) )
myStructure = constitutive_nonlocal_structure ( myInstance )
ns = constitutive_nonlocal_totalNslip ( myInstance )
2010-02-17 18:51:36 +05:30
tau = 0.0_pReal
2009-08-12 16:52:02 +05:30
gdot = 0.0_pReal
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
dLower = 0.0_pReal
dUpper = 0.0_pReal
2009-08-11 22:01:57 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-11 22:01:57 +05:30
!*** shortcut to state variables
2012-02-13 19:48:07 +05:30
forall ( s = 1_pInt : ns , t = 1_pInt : 4_pInt ) &
rhoSgl ( s , t ) = max ( state ( g , ip , el ) % p ( ( t - 1_pInt ) * ns + s ) , 0.0_pReal )
forall ( s = 1_pInt : ns , t = 5_pInt : 8_pInt ) &
rhoSgl ( s , t ) = state ( g , ip , el ) % p ( ( t - 1_pInt ) * ns + s )
forall ( s = 1_pInt : ns , c = 1_pInt : 2_pInt ) &
rhoDip ( s , c ) = max ( state ( g , ip , el ) % p ( ( 7_pInt + c ) * ns + s ) , 0.0_pReal )
rhoForest = state ( g , ip , el ) % p ( 10_pInt * ns + 1 : 11_pInt * ns )
tauThreshold = state ( g , ip , el ) % p ( 11_pInt * ns + 1_pInt : 12_pInt * ns )
tauBack = state ( g , ip , el ) % p ( 12_pInt * ns + 1 : 13_pInt * ns )
forall ( t = 1_pInt : 4_pInt ) &
v ( 1_pInt : ns , t ) = state ( g , ip , el ) % p ( ( 12_pInt + t ) * ns + 1_pInt : ( 13_pInt + t ) * ns )
2009-08-11 22:01:57 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2010-03-04 22:44:47 +05:30
!*** sanity check for timestep
if ( timestep < = 0.0_pReal ) then ! if illegal timestep...
2011-03-21 20:48:09 +05:30
dotState % p = 0.0_pReal ! ...return without doing anything (-> zero dotState)
2010-03-04 22:44:47 +05:30
return
endif
2009-08-11 22:01:57 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-12 16:52:02 +05:30
!****************************************************************************
!*** Calculate shear rate
2012-02-13 19:48:07 +05:30
forall ( t = 1_pInt : 4_pInt ) &
gdot ( 1_pInt : ns , t ) = rhoSgl ( 1_pInt : ns , t ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance ) * v ( 1 : ns , t )
forall ( s = 1_pInt : ns , t = 1_pInt : 4_pInt , rhoSgl ( s , t + 4_pInt ) * v ( s , t ) < 0.0_pReal ) & ! contribution of used rho for changing sign of v
2012-01-25 22:34:37 +05:30
gdot ( s , t ) = gdot ( s , t ) + abs ( rhoSgl ( s , t + 4 ) ) * constitutive_nonlocal_burgers ( s , myInstance ) * v ( s , t )
2010-01-05 21:37:24 +05:30
2011-03-29 12:57:19 +05:30
#ifndef _OPENMP
2012-02-13 19:48:07 +05:30
if ( debug_verbosity > 6_pInt . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,10(12x,12(e12.5,1x),/))' ) '<< CONST >> rho / 1/m^2' , rhoSgl , rhoDip
write ( 6 , '(a,/,4(12x,12(e12.5,1x),/))' ) '<< CONST >> gdot / 1/s' , gdot
2011-03-29 12:57:19 +05:30
endif
#endif
2010-10-26 19:12:18 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2011-04-06 14:37:36 +05:30
!****************************************************************************
2012-01-17 15:56:57 +05:30
!*** check LFC condition for flux
2011-04-06 14:37:36 +05:30
2012-01-17 15:56:57 +05:30
if ( any ( abs ( gdot ) > 0.0_pReal . and . 2.0_pReal * v * timestep > mesh_ipVolume ( ip , el ) / maxval ( mesh_ipArea ( : , ip , el ) ) ) ) then ! safety factor 2.0 (we use the reference volume and are for simplicity here)
2011-09-07 17:00:28 +05:30
#ifndef _OPENMP
if ( debug_verbosity > 6 ) then
2012-01-17 15:56:57 +05:30
write ( 6 , '(a,i5,a,i2)' ) '<< CONST >> LFC condition not fullfilled at el ' , el , ' ip ' , ip
2011-09-07 17:00:28 +05:30
endif
#endif
2011-10-20 22:16:11 +05:30
dotState % p = DAMASK_NaN
2011-04-06 14:37:36 +05:30
return
endif
2009-08-12 16:52:02 +05:30
!****************************************************************************
2011-02-25 15:23:20 +05:30
!*** calculate limits for stable dipole height
2010-02-17 18:51:36 +05:30
do s = 1 , ns ! loop over slip systems
2011-02-25 15:23:20 +05:30
sLattice = constitutive_nonlocal_slipSystemLattice ( s , myInstance )
2012-01-17 15:56:57 +05:30
tau ( s ) = math_mul6x6 ( Tstar_v , lattice_Sslip_v ( 1 : 6 , sLattice , myStructure ) ) + tauBack ( s )
2010-02-17 18:51:36 +05:30
enddo
2012-01-25 22:34:37 +05:30
dLower = constitutive_nonlocal_minimumDipoleHeight ( 1 : ns , 1 : 2 , myInstance )
2011-02-09 18:42:46 +05:30
dUpper ( 1 : ns , 2 ) = min ( 1.0_pReal / sqrt ( sum ( abs ( rhoSgl ) , 2 ) + sum ( rhoDip , 2 ) ) , &
2012-01-25 22:34:37 +05:30
constitutive_nonlocal_Gmod ( myInstance ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
/ ( 8.0_pReal * pi * abs ( tau ) ) )
dUpper ( 1 : ns , 1 ) = dUpper ( 1 : ns , 2 ) / ( 1.0_pReal - constitutive_nonlocal_nu ( myInstance ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2011-04-06 14:37:36 +05:30
2010-01-05 21:37:24 +05:30
!****************************************************************************
2010-01-06 15:24:00 +05:30
!*** dislocation remobilization (bauschinger effect)
2010-01-05 21:37:24 +05:30
2010-05-21 14:21:15 +05:30
rhoDotRemobilization = 0.0_pReal
2010-01-05 21:37:24 +05:30
if ( timestep > 0.0_pReal ) then
do t = 1 , 4
do s = 1 , ns
2011-11-04 18:42:17 +05:30
if ( rhoSgl ( s , t + 4 ) * v ( s , t ) < 0.0_pReal ) then
2010-05-21 14:21:15 +05:30
rhoDotRemobilization ( s , t ) = abs ( rhoSgl ( s , t + 4 ) ) / timestep
2010-01-06 15:24:00 +05:30
rhoSgl ( s , t ) = rhoSgl ( s , t ) + abs ( rhoSgl ( s , t + 4 ) )
2010-05-21 14:21:15 +05:30
rhoDotRemobilization ( s , t + 4 ) = - rhoSgl ( s , t + 4 ) / timestep
2010-01-06 15:24:00 +05:30
rhoSgl ( s , t + 4 ) = 0.0_pReal
2010-01-05 21:37:24 +05:30
endif
enddo
enddo
endif
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
!****************************************************************************
!*** calculate dislocation multiplication
2009-10-07 21:01:52 +05:30
2010-10-26 19:12:18 +05:30
rhoDotMultiplication = 0.0_pReal
2011-02-09 18:42:46 +05:30
where ( rhoSgl ( 1 : ns , 3 : 4 ) > 0.0_pReal ) &
rhoDotMultiplication ( 1 : ns , 1 : 2 ) = spread ( 0.5_pReal * sum ( abs ( gdot ( 1 : ns , 3 : 4 ) ) , 2 ) * sqrt ( rhoForest ) &
2012-01-25 22:34:37 +05:30
/ constitutive_nonlocal_lambda0 ( 1 : ns , myInstance ) &
/ constitutive_nonlocal_burgers ( 1 : ns , myInstance ) , 2 , 2 )
2011-02-09 18:42:46 +05:30
where ( rhoSgl ( 1 : ns , 1 : 2 ) > 0.0_pReal ) &
rhoDotMultiplication ( 1 : ns , 3 : 4 ) = spread ( 0.5_pReal * sum ( abs ( gdot ( 1 : ns , 1 : 2 ) ) , 2 ) * sqrt ( rhoForest ) &
2012-01-25 22:34:37 +05:30
/ constitutive_nonlocal_lambda0 ( 1 : ns , myInstance ) &
/ constitutive_nonlocal_burgers ( 1 : ns , myInstance ) , 2 , 2 )
2009-08-11 22:01:57 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-12 16:52:02 +05:30
!****************************************************************************
2011-01-11 20:25:36 +05:30
!*** calculate dislocation fluxes (only for nonlocal constitution)
2009-08-12 16:52:02 +05:30
2010-05-21 14:21:15 +05:30
rhoDotFlux = 0.0_pReal
2009-10-07 21:01:52 +05:30
2011-01-11 20:25:36 +05:30
if ( . not . phase_localConstitution ( material_phase ( g , ip , el ) ) ) then ! only for nonlocal constitution
2011-02-23 13:38:06 +05:30
!*** take care of the definition of lattice_st = lattice_sd x lattice_sn !!!
!*** opposite sign to our p vector in the (s,p,n) triplet !!!
2011-02-09 18:42:46 +05:30
m ( 1 : 3 , 1 : ns , 1 ) = lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
m ( 1 : 3 , 1 : ns , 2 ) = - lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
2011-02-23 13:38:06 +05:30
m ( 1 : 3 , 1 : ns , 3 ) = - lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
m ( 1 : 3 , 1 : ns , 4 ) = lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
2010-10-15 18:49:26 +05:30
2011-02-16 22:05:38 +05:30
my_Fe = Fe ( 1 : 3 , 1 : 3 , g , ip , el )
my_F = math_mul33x33 ( my_Fe , Fp ( 1 : 3 , 1 : 3 , g , ip , el ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2011-11-04 18:42:17 +05:30
fluxdensity = rhoSgl ( 1 : ns , 1 : 4 ) * v
2011-01-11 20:25:36 +05:30
do n = 1 , FE_NipNeighbors ( mesh_element ( 2 , el ) ) ! loop through my neighbors
neighboring_el = mesh_ipNeighborhood ( 1 , n , ip , el )
neighboring_ip = mesh_ipNeighborhood ( 2 , n , ip , el )
2011-02-16 22:05:38 +05:30
if ( neighboring_el > 0_pInt . and . neighboring_ip > 0_pInt ) then ! if neighbor exists ...
do neighboring_n = 1 , FE_NipNeighbors ( mesh_element ( 2 , neighboring_el ) ) ! find neighboring index that points from my neighbor to myself
if ( el == mesh_ipNeighborhood ( 1 , neighboring_n , neighboring_ip , neighboring_el ) &
2011-02-24 15:31:41 +05:30
. and . ip == mesh_ipNeighborhood ( 2 , neighboring_n , neighboring_ip , neighboring_el ) ) then ! possible candidate
if ( math_mul3x3 ( mesh_ipAreaNormal ( 1 : 3 , n , ip , el ) , &
mesh_ipAreaNormal ( 1 : 3 , neighboring_n , neighboring_ip , neighboring_el ) ) < 0.0_pReal ) then ! area normals have opposite orientation (we have to check that because of special case for single element with two ips and periodicity. In this case the neighbor is identical in two different directions.)
exit
endif
endif
2011-02-16 22:05:38 +05:30
enddo
endif
2012-02-13 19:48:07 +05:30
opposite_n = n + mod ( n , 2_pInt ) - mod ( n + 1_pInt , 2_pInt )
2011-01-11 20:25:36 +05:30
opposite_el = mesh_ipNeighborhood ( 1 , opposite_n , ip , el )
opposite_ip = mesh_ipNeighborhood ( 2 , opposite_n , ip , el )
2011-02-16 22:05:38 +05:30
if ( neighboring_el > 0_pInt . and . neighboring_ip > 0_pInt ) then ! if neighbor exists, average deformation gradient
neighboring_Fe = Fe ( 1 : 3 , 1 : 3 , g , neighboring_ip , neighboring_el )
neighboring_F = math_mul33x33 ( neighboring_Fe , Fp ( 1 : 3 , 1 : 3 , g , neighboring_ip , neighboring_el ) )
Favg = 0.5_pReal * ( my_F + neighboring_F )
2011-01-11 20:25:36 +05:30
else ! if no neighbor, take my value as average
2011-02-16 22:05:38 +05:30
Favg = my_F
2011-01-11 20:25:36 +05:30
endif
2011-02-16 22:05:38 +05:30
!* FLUX FROM MY NEIGHBOR TO ME
2011-09-07 17:00:28 +05:30
!* This is only considered, if I have a neighbor of nonlocal constitution (also nonlocal constitutive law with local properties) that is at least a little bit compatible.
2011-02-16 22:05:38 +05:30
!* If it's not at all compatible, no flux is arriving, because everything is dammed in front of my neighbor's interface.
!* The entering flux from my neighbor will be distributed on my slip systems according to the compatibility
considerEnteringFlux = . false .
2011-08-02 16:47:45 +05:30
neighboring_fluxdensity = 0.0_pReal ! needed for check of sign change in flux density below
2011-02-16 22:05:38 +05:30
if ( neighboring_el > 0_pInt . or . neighboring_ip > 0_pInt ) then
2011-09-07 17:00:28 +05:30
if ( phase_constitution ( material_phase ( 1 , neighboring_ip , neighboring_el ) ) == constitutive_nonlocal_label &
2011-02-16 22:05:38 +05:30
. and . any ( constitutive_nonlocal_compatibility ( : , : , : , n , ip , el ) > 0.0_pReal ) ) &
2011-08-02 16:47:45 +05:30
considerEnteringFlux = . true .
2011-02-16 22:05:38 +05:30
endif
if ( considerEnteringFlux ) then
2012-01-26 13:13:36 +05:30
forall ( t = 1 : 4 ) &
neighboring_fluxdensity ( 1 : ns , t ) = state ( g , neighboring_ip , neighboring_el ) % p ( ( t - 1 ) * ns + 1 : t * ns ) &
* state ( g , neighboring_ip , neighboring_el ) % p ( ( 12 + t ) * ns + 1 : ( 13 + t ) * ns )
2012-01-26 19:20:00 +05:30
normal_neighbor2me_defConf = math_det33 ( Favg ) &
* math_mul33x3 ( math_inv33 ( transpose ( Favg ) ) , mesh_ipAreaNormal ( 1 : 3 , neighboring_n , neighboring_ip , neighboring_el ) ) ! calculate the normal of the interface in (average) deformed configuration (now pointing from my neighbor to me!!!)
normal_neighbor2me = math_mul33x3 ( transpose ( neighboring_Fe ) , normal_neighbor2me_defConf ) / math_det33 ( neighboring_Fe ) ! interface normal in the lattice configuration of my neighbor
2011-02-16 22:05:38 +05:30
area = mesh_ipArea ( neighboring_n , neighboring_ip , neighboring_el ) * math_norm3 ( normal_neighbor2me )
normal_neighbor2me = normal_neighbor2me / math_norm3 ( normal_neighbor2me ) ! normalize the surface normal to unit length
do s = 1 , ns
do t = 1 , 4
c = ( t + 1 ) / 2
topp = t + mod ( t , 2 ) - mod ( t + 1 , 2 )
2011-08-02 16:47:45 +05:30
if ( neighboring_fluxdensity ( s , t ) * math_mul3x3 ( m ( 1 : 3 , s , t ) , normal_neighbor2me ) > 0.0_pReal & ! flux from my neighbor to me == entering flux for me
. and . fluxdensity ( s , t ) * neighboring_fluxdensity ( s , t ) > = 0.0_pReal ) then ! ... only if no sign change in flux density
2011-02-16 22:05:38 +05:30
lineLength = neighboring_fluxdensity ( s , t ) * math_mul3x3 ( m ( 1 : 3 , s , t ) , normal_neighbor2me ) * area ! positive line length that wants to enter through this interface
where ( constitutive_nonlocal_compatibility ( c , 1 : ns , s , n , ip , el ) > 0.0_pReal ) & ! positive compatibility...
rhoDotFlux ( 1 : ns , t ) = rhoDotFlux ( 1 : ns , t ) + lineLength / mesh_ipVolume ( ip , el ) & ! ... transferring to equally signed dislocation type
* constitutive_nonlocal_compatibility ( c , 1 : ns , s , n , ip , el ) ** 2.0_pReal
where ( constitutive_nonlocal_compatibility ( c , 1 : ns , s , n , ip , el ) < 0.0_pReal ) & ! ..negative compatibility...
rhoDotFlux ( 1 : ns , topp ) = rhoDotFlux ( 1 : ns , topp ) + lineLength / mesh_ipVolume ( ip , el ) & ! ... transferring to opposite signed dislocation type
2011-02-23 13:59:51 +05:30
* constitutive_nonlocal_compatibility ( c , 1 : ns , s , n , ip , el ) ** 2.0_pReal
2011-01-11 20:25:36 +05:30
endif
2011-02-16 22:05:38 +05:30
enddo
enddo
2011-01-11 20:25:36 +05:30
endif
2011-08-02 16:47:45 +05:30
!* FLUX FROM ME TO MY NEIGHBOR
2011-09-07 17:00:28 +05:30
!* This is not considered, if my opposite neighbor has a different constitutive law than nonlocal (still considered for nonlocal law with lcal properties).
2011-08-02 16:47:45 +05:30
!* Then, we assume, that the opposite(!) neighbor sends an equal amount of dislocations to me.
!* So the net flux in the direction of my neighbor is equal to zero:
!* leaving flux to neighbor == entering flux from opposite neighbor
!* In case of reduced transmissivity, part of the leaving flux is stored as dead dislocation density.
!* That means for an interface of zero transmissivity the leaving flux is fully converted to dead dislocations.
considerLeavingFlux = . true .
if ( opposite_el > 0 . and . opposite_ip > 0 ) then
2011-09-07 17:00:28 +05:30
if ( phase_constitution ( material_phase ( 1 , opposite_ip , opposite_el ) ) / = constitutive_nonlocal_label ) &
2011-08-02 16:47:45 +05:30
considerLeavingFlux = . false .
endif
if ( considerLeavingFlux ) then
2012-02-03 18:20:54 +05:30
normal_me2neighbor_defConf = math_det33 ( Favg ) * math_mul33x3 ( math_inv33 ( math_transpose33 ( Favg ) ) , &
mesh_ipAreaNormal ( 1 : 3 , n , ip , el ) ) ! calculate the normal of the interface in (average) deformed configuration (pointing from me to my neighbor!!!)
2012-01-30 19:22:41 +05:30
normal_me2neighbor = math_mul33x3 ( math_transpose33 ( my_Fe ) , normal_me2neighbor_defConf ) / math_det33 ( my_Fe ) ! interface normal in my lattice configuration
2011-08-02 16:47:45 +05:30
area = mesh_ipArea ( n , ip , el ) * math_norm3 ( normal_me2neighbor )
normal_me2neighbor = normal_me2neighbor / math_norm3 ( normal_me2neighbor ) ! normalize the surface normal to unit length
do s = 1 , ns
do t = 1 , 4
c = ( t + 1 ) / 2
if ( fluxdensity ( s , t ) * math_mul3x3 ( m ( 1 : 3 , s , t ) , normal_me2neighbor ) > 0.0_pReal ) then ! flux from me to my neighbor == leaving flux for me (might also be a pure flux from my mobile density to dead density if interface not at all transmissive)
lineLength = fluxdensity ( s , t ) * math_mul3x3 ( m ( 1 : 3 , s , t ) , normal_me2neighbor ) * area ! positive line length that wants to leave through this interface
if ( fluxdensity ( s , t ) * neighboring_fluxdensity ( s , t ) > = 0.0_pReal ) then ! no sign change in flux density
transmissivity = sum ( constitutive_nonlocal_compatibility ( c , 1 : ns , s , n , ip , el ) ** 2.0_pReal ) ! overall transmissivity from this slip system to my neighbor
else ! sign change in flux density means sign change in stress which does not allow for dislocations to arive at the neighbor
transmissivity = 0.0_pReal
endif
rhoDotFlux ( s , t ) = rhoDotFlux ( s , t ) - lineLength / mesh_ipVolume ( ip , el ) ! subtract dislocation flux from current mobile type
rhoDotFlux ( s , t + 4 ) = rhoDotFlux ( s , t + 4 ) + lineLength / mesh_ipVolume ( ip , el ) * ( 1.0_pReal - transmissivity ) &
* sign ( 1.0_pReal , fluxdensity ( s , t ) ) ! dislocation flux that is not able to leave through interface (because of low transmissivity) will remain as immobile single density at the material point
endif
enddo
enddo
endif
2011-02-16 22:05:38 +05:30
2011-02-24 15:31:41 +05:30
enddo ! neighbor loop
2010-10-26 19:12:18 +05:30
endif
2009-08-28 19:20:47 +05:30
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
if ( numerics_integrationMode == 1_pInt ) then
2011-02-24 15:31:41 +05:30
constitutive_nonlocal_rhoDotFlux ( 1 : ns , 1 : 10 , g , ip , el ) = rhoDotFlux ( 1 : ns , 1 : 10 ) ! save flux calculation for output (if in central integration mode)
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
endif
2009-08-28 19:20:47 +05:30
!****************************************************************************
!*** calculate dipole formation and annihilation
!*** formation by glide
2010-01-05 21:37:24 +05:30
do c = 1 , 2
2010-02-17 18:51:36 +05:30
2012-01-25 22:34:37 +05:30
rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c - 1 ) = - 2.0_pReal * dUpper ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* ( rhoSgl ( 1 : ns , 2 * c - 1 ) * abs ( gdot ( 1 : ns , 2 * c ) ) & ! negative mobile --> positive mobile
+ rhoSgl ( 1 : ns , 2 * c ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) & ! positive mobile --> negative mobile
+ abs ( rhoSgl ( 1 : ns , 2 * c + 4 ) ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) ! positive mobile --> negative immobile
2010-02-17 18:51:36 +05:30
2012-01-25 22:34:37 +05:30
rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c ) = - 2.0_pReal * dUpper ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* ( rhoSgl ( 1 : ns , 2 * c - 1 ) * abs ( gdot ( 1 : ns , 2 * c ) ) & ! negative mobile --> positive mobile
+ rhoSgl ( 1 : ns , 2 * c ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) & ! positive mobile --> negative mobile
+ abs ( rhoSgl ( 1 : ns , 2 * c + 3 ) ) * abs ( gdot ( 1 : ns , 2 * c ) ) ) ! negative mobile --> positive immobile
2010-02-17 18:51:36 +05:30
2012-01-25 22:34:37 +05:30
rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c + 3 ) = - 2.0_pReal * dUpper ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* rhoSgl ( 1 : ns , 2 * c + 3 ) * abs ( gdot ( 1 : ns , 2 * c ) ) ! negative mobile --> positive immobile
2010-02-17 18:51:36 +05:30
2012-01-25 22:34:37 +05:30
rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c + 4 ) = - 2.0_pReal * dUpper ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* rhoSgl ( 1 : ns , 2 * c + 4 ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ! positive mobile --> negative immobile
2010-02-17 18:51:36 +05:30
2011-02-09 18:42:46 +05:30
rhoDotSingle2DipoleGlide ( 1 : ns , c + 8 ) = - rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c - 1 ) - rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c ) &
+ abs ( rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c + 3 ) ) + abs ( rhoDotSingle2DipoleGlide ( 1 : ns , 2 * c + 4 ) )
2010-01-05 21:37:24 +05:30
enddo
2009-10-07 21:01:52 +05:30
2009-08-28 19:20:47 +05:30
!*** athermal annihilation
2010-05-21 14:21:15 +05:30
rhoDotAthermalAnnihilation = 0.0_pReal
2009-08-28 19:20:47 +05:30
forall ( c = 1 : 2 ) &
2012-01-25 22:34:37 +05:30
rhoDotAthermalAnnihilation ( 1 : ns , c + 8 ) = - 2.0_pReal * dLower ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* ( 2.0_pReal * ( rhoSgl ( 1 : ns , 2 * c - 1 ) * abs ( gdot ( 1 : ns , 2 * c ) ) + rhoSgl ( 1 : ns , 2 * c ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) & ! was single hitting single
+ 2.0_pReal * ( abs ( rhoSgl ( 1 : ns , 2 * c + 3 ) ) * abs ( gdot ( 1 : ns , 2 * c ) ) + abs ( rhoSgl ( 1 : ns , 2 * c + 4 ) ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) & ! was single hitting immobile single or was immobile single hit by single
+ rhoDip ( 1 : ns , c ) * ( abs ( gdot ( 1 : ns , 2 * c - 1 ) ) + abs ( gdot ( 1 : ns , 2 * c ) ) ) ) ! single knocks dipole constituent
2009-08-28 19:20:47 +05:30
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
!*** thermally activated annihilation of dipoles
2009-10-07 21:01:52 +05:30
2010-05-21 14:21:15 +05:30
rhoDotThermalAnnihilation = 0.0_pReal
2011-01-26 15:47:42 +05:30
D = constitutive_nonlocal_Dsd0 ( myInstance ) * exp ( - constitutive_nonlocal_Qsd ( myInstance ) / ( kB * Temperature ) )
2009-08-28 19:20:47 +05:30
vClimb = constitutive_nonlocal_atomicVolume ( myInstance ) * D / ( kB * Temperature ) &
* constitutive_nonlocal_Gmod ( myInstance ) / ( 2.0_pReal * pi * ( 1.0_pReal - constitutive_nonlocal_nu ( myInstance ) ) ) &
2011-02-09 18:42:46 +05:30
* 2.0_pReal / ( dUpper ( 1 : ns , 1 ) + dLower ( 1 : ns , 1 ) )
2009-08-28 19:20:47 +05:30
2011-02-09 18:42:46 +05:30
rhoDotThermalAnnihilation ( 1 : ns , 9 ) = - 4.0_pReal * rhoDip ( 1 : ns , 1 ) * vClimb / ( dUpper ( 1 : ns , 1 ) - dLower ( 1 : ns , 1 ) ) ! edge climb
rhoDotThermalAnnihilation ( 1 : ns , 10 ) = 0.0_pReal !!! cross slipping still has to be implemented !!!
2009-08-28 19:20:47 +05:30
!****************************************************************************
!*** assign the rates of dislocation densities to my dotState
2010-05-21 14:21:15 +05:30
rhoDot = 0.0_pReal
2011-08-02 16:47:45 +05:30
rhoDot = rhoDotFlux &
+ rhoDotMultiplication &
+ rhoDotRemobilization &
+ rhoDotSingle2DipoleGlide &
+ rhoDotAthermalAnnihilation &
+ rhoDotThermalAnnihilation
2010-05-21 14:21:15 +05:30
2011-03-29 12:57:19 +05:30
dotState % p ( 1 : 10 * ns ) = dotState % p ( 1 : 10 * ns ) + reshape ( rhoDot , ( / 10 * ns / ) )
#ifndef _OPENMP
if ( debug_verbosity > 6 . and . ( ( debug_e == el . and . debug_i == ip . and . debug_g == g ) . or . . not . debug_selectiveDebugger ) ) then
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,8(12x,12(e12.5,1x),/))' ) '<< CONST >> dislocation remobilization' , rhoDotRemobilization ( 1 : ns , 1 : 8 ) * timestep
write ( 6 , '(a,/,4(12x,12(e12.5,1x),/))' ) '<< CONST >> dislocation multiplication' , rhoDotMultiplication ( 1 : ns , 1 : 4 ) * timestep
write ( 6 , '(a,/,8(12x,12(e12.5,1x),/))' ) '<< CONST >> dislocation flux' , rhoDotFlux ( 1 : ns , 1 : 8 ) * timestep
write ( 6 , '(a,/,10(12x,12(e12.5,1x),/))' ) '<< CONST >> dipole formation by glide' , rhoDotSingle2DipoleGlide * timestep
write ( 6 , '(a,/,2(12x,12(e12.5,1x),/))' ) '<< CONST >> athermal dipole annihilation' , &
2011-03-21 16:01:17 +05:30
rhoDotAthermalAnnihilation ( 1 : ns , 1 : 2 ) * timestep
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,2(12x,12(e12.5,1x),/))' ) '<< CONST >> thermally activated dipole annihilation' , &
2011-03-21 16:01:17 +05:30
rhoDotThermalAnnihilation ( 1 : ns , 9 : 10 ) * timestep
2012-02-02 01:50:05 +05:30
write ( 6 , '(a,/,10(12x,12(e12.5,1x),/))' ) '<< CONST >> total density change' , rhoDot * timestep
write ( 6 , '(a,/,10(12x,12(f12.7,1x),/))' ) '<< CONST >> relative density change' , &
2011-03-21 16:01:17 +05:30
rhoDot ( 1 : ns , 1 : 8 ) * timestep / ( abs ( rhoSgl ) + 1.0e-10 ) , &
rhoDot ( 1 : ns , 9 : 10 ) * timestep / ( rhoDip + 1.0e-10 )
2012-01-17 15:56:57 +05:30
write ( 6 , * )
2011-03-29 12:57:19 +05:30
endif
#endif
2010-10-26 19:12:18 +05:30
2009-08-11 22:01:57 +05:30
endsubroutine
2009-12-15 13:50:31 +05:30
!*********************************************************************
2010-10-15 18:49:26 +05:30
!* COMPATIBILITY UPDATE *
!* Compatibility is defined as normalized product of signed cosine *
!* of the angle between the slip plane normals and signed cosine of *
!* the angle between the slip directions. Only the largest values *
!* that sum up to a total of 1 are considered, all others are set to *
!* zero. *
2009-12-15 13:50:31 +05:30
!*********************************************************************
2010-10-12 18:38:54 +05:30
subroutine constitutive_nonlocal_updateCompatibility ( orientation , i , e )
use prec , only : pReal , &
pInt
use math , only : math_QuaternionDisorientation , &
math_mul3x3 , &
math_qRot
use material , only : material_phase , &
phase_constitution , &
phase_localConstitution , &
phase_constitutionInstance , &
homogenization_maxNgrains
use mesh , only : mesh_element , &
mesh_ipNeighborhood , &
FE_NipNeighbors , &
2011-02-16 22:08:18 +05:30
FE_maxNipNeighbors , &
2010-10-12 18:38:54 +05:30
mesh_maxNips , &
mesh_NcpElems
use lattice , only : lattice_sn , &
lattice_sd , &
2010-10-15 18:49:26 +05:30
lattice_st
2009-12-18 21:16:33 +05:30
2009-12-15 13:50:31 +05:30
implicit none
!* input variables
2010-10-12 18:38:54 +05:30
integer ( pInt ) , intent ( in ) :: i , & ! ip index
e ! element index
real ( pReal ) , dimension ( 4 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
orientation ! crystal orientation in quaternions
2009-12-15 13:50:31 +05:30
!* output variables
!* local variables
2011-02-16 22:08:18 +05:30
integer ( pInt ) Nneighbors , & ! number of neighbors
n , & ! neighbor index
2010-10-12 18:38:54 +05:30
neighboring_e , & ! element index of my neighbor
neighboring_i , & ! integration point index of my neighbor
2011-02-16 22:08:18 +05:30
my_phase , &
neighboring_phase , &
my_structure , & ! lattice structure
my_instance , & ! instance of constitution
ns , & ! number of active slip systems
2010-10-12 18:38:54 +05:30
s1 , & ! slip system index (me)
s2 ! slip system index (my neighbor)
real ( pReal ) , dimension ( 4 ) :: absoluteMisorientation ! absolute misorientation (without symmetry) between me and my neighbor
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
real ( pReal ) , dimension ( 2 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( 1 , i , e ) ) ) , &
constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( 1 , i , e ) ) ) , &
FE_NipNeighbors ( mesh_element ( 2 , e ) ) ) :: &
compatibility ! compatibility for current element and ip
2011-02-16 22:08:18 +05:30
real ( pReal ) , dimension ( 3 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( 1 , i , e ) ) ) ) :: &
slipNormal , &
slipDirection
2010-10-15 18:49:26 +05:30
real ( pReal ) compatibilitySum , &
2011-02-16 22:08:18 +05:30
thresholdValue , &
nThresholdValues
logical , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( 1 , i , e ) ) ) ) :: &
belowThreshold
2010-10-12 18:38:54 +05:30
2011-02-16 22:08:18 +05:30
Nneighbors = FE_NipNeighbors ( mesh_element ( 2 , e ) )
my_phase = material_phase ( 1 , i , e )
my_instance = phase_constitutionInstance ( my_phase )
my_structure = constitutive_nonlocal_structure ( my_instance )
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
ns = constitutive_nonlocal_totalNslip ( my_instance )
2011-02-16 22:08:18 +05:30
slipNormal ( 1 : 3 , 1 : ns ) = lattice_sn ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , my_instance ) , my_structure )
slipDirection ( 1 : 3 , 1 : ns ) = lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , my_instance ) , my_structure )
!*** start out fully compatible
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
compatibility = 0.0_pReal
forall ( s1 = 1 : ns ) &
compatibility ( 1 : 2 , s1 , s1 , 1 : Nneighbors ) = 1.0_pReal
2011-02-16 22:08:18 +05:30
2012-01-17 15:56:57 +05:30
!*** Loop thrugh neighbors and check whether there is any compatibility.
do n = 1 , Nneighbors
neighboring_e = mesh_ipNeighborhood ( 1 , n , i , e )
neighboring_i = mesh_ipNeighborhood ( 2 , n , i , e )
!* FREE SURFACE
!* Set surface transmissivity to the value specified in the material.config
if ( neighboring_e < = 0 . or . neighboring_i < = 0 ) then
forall ( s1 = 1 : ns ) &
compatibility ( 1 : 2 , s1 , s1 , n ) = sqrt ( constitutive_nonlocal_surfaceTransmissivity ( my_instance ) )
cycle
endif
!* PHASE BOUNDARY
!* If we encounter a different nonlocal "cpfem" phase at the neighbor,
!* we consider this to be a real "physical" phase boundary, so completely incompatible.
!* If the neighboring "cpfem" phase has a local constitution,
!* we do not consider this to be a phase boundary, so completely compatible.
neighboring_phase = material_phase ( 1 , neighboring_i , neighboring_e )
if ( neighboring_phase / = my_phase ) then
if ( . not . phase_localConstitution ( neighboring_phase ) ) then
forall ( s1 = 1 : ns ) &
compatibility ( 1 : 2 , s1 , s1 , n ) = 0.0_pReal ! = sqrt(0.0)
endif
cycle
endif
!* GRAIN BOUNDARY ?
!* The compatibility value is defined as the product of the slip normal projection and the slip direction projection.
!* Its sign is always positive for screws, for edges it has the same sign as the slip normal projection.
!* Since the sum for each slip system can easily exceed one (which would result in a transmissivity larger than one),
!* only values above or equal to a certain threshold value are considered. This threshold value is chosen, such that
!* the number of compatible slip systems is minimized with the sum of the original compatibility values exceeding one.
!* Finally the smallest compatibility value is decreased until the sum is exactly equal to one.
!* All values below the threshold are set to zero.
absoluteMisorientation = math_QuaternionDisorientation ( orientation ( 1 : 4 , 1 , i , e ) , &
orientation ( 1 : 4 , 1 , neighboring_i , neighboring_e ) , &
0_pInt ) ! no symmetry
do s1 = 1 , ns ! my slip systems
do s2 = 1 , ns ! my neighbor's slip systems
compatibility ( 1 , s2 , s1 , n ) = math_mul3x3 ( slipNormal ( 1 : 3 , s1 ) , math_qRot ( absoluteMisorientation , slipNormal ( 1 : 3 , s2 ) ) ) &
* abs ( math_mul3x3 ( slipDirection ( 1 : 3 , s1 ) , math_qRot ( absoluteMisorientation , slipDirection ( 1 : 3 , s2 ) ) ) )
compatibility ( 2 , s2 , s1 , n ) = abs ( math_mul3x3 ( slipNormal ( 1 : 3 , s1 ) , math_qRot ( absoluteMisorientation , slipNormal ( 1 : 3 , s2 ) ) ) ) &
* abs ( math_mul3x3 ( slipDirection ( 1 : 3 , s1 ) , math_qRot ( absoluteMisorientation , slipDirection ( 1 : 3 , s2 ) ) ) )
enddo
compatibilitySum = 0.0_pReal
belowThreshold = . true .
do while ( compatibilitySum < 1.0_pReal . and . any ( belowThreshold ( 1 : ns ) ) )
thresholdValue = maxval ( compatibility ( 2 , 1 : ns , s1 , n ) , belowThreshold ( 1 : ns ) ) ! screws always positive
nThresholdValues = real ( count ( compatibility ( 2 , 1 : ns , s1 , n ) == thresholdValue ) , pReal )
where ( compatibility ( 2 , 1 : ns , s1 , n ) > = thresholdValue ) &
belowThreshold ( 1 : ns ) = . false .
if ( compatibilitySum + thresholdValue * nThresholdValues > 1.0_pReal ) &
where ( abs ( compatibility ( 1 : 2 , 1 : ns , s1 , n ) ) == thresholdValue ) &
compatibility ( 1 : 2 , 1 : ns , s1 , n ) = sign ( ( 1.0_pReal - compatibilitySum ) / nThresholdValues , compatibility ( 1 : 2 , 1 : ns , s1 , n ) )
compatibilitySum = compatibilitySum + nThresholdValues * thresholdValue
enddo
where ( belowThreshold ( 1 : ns ) ) compatibility ( 1 , 1 : ns , s1 , n ) = 0.0_pReal
where ( belowThreshold ( 1 : ns ) ) compatibility ( 2 , 1 : ns , s1 , n ) = 0.0_pReal
enddo ! my slip systems cycle
enddo ! neighbor cycle
constitutive_nonlocal_compatibility ( 1 : 2 , 1 : ns , 1 : ns , 1 : Nneighbors , i , e ) = compatibility
endsubroutine
!*********************************************************************
!* rate of change of temperature *
!*********************************************************************
pure function constitutive_nonlocal_dotTemperature ( Tstar_v , Temperature , state , g , ip , el )
use prec , only : pReal , &
pInt , &
p_vec
use mesh , only : mesh_NcpElems , &
mesh_maxNips
use material , only : homogenization_maxNgrains
implicit none
!* input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain ID
ip , & ! current integration point
el ! current element
real ( pReal ) , intent ( in ) :: Temperature ! temperature
real ( pReal ) , dimension ( 6 ) , intent ( in ) :: Tstar_v ! 2nd Piola-Kirchhoff stress in Mandel notation
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
state ! microstructural state
!* output variables
real ( pReal ) constitutive_nonlocal_dotTemperature ! evolution of Temperature
!* local variables
constitutive_nonlocal_dotTemperature = 0.0_pReal
endfunction
!*********************************************************************
!* calculates quantities characterizing the microstructure *
!*********************************************************************
function constitutive_nonlocal_dislocationstress ( state , Fe , g , ip , el )
use prec , only : pReal , &
pInt , &
p_vec
use math , only : math_mul33x33 , &
math_mul33x3 , &
2012-01-26 19:20:00 +05:30
math_invert33 , &
math_transpose33 , &
2012-01-17 15:56:57 +05:30
pi
use mesh , only : mesh_NcpElems , &
mesh_maxNips , &
mesh_element , &
mesh_node0 , &
FE_Nips , &
mesh_ipCenterOfGravity , &
mesh_ipVolume , &
mesh_periodicSurface
use material , only : homogenization_maxNgrains , &
material_phase , &
phase_localConstitution , &
phase_constitutionInstance
implicit none
!*** input variables
integer ( pInt ) , intent ( in ) :: g , & ! current grain ID
ip , & ! current integration point
el ! current element
real ( pReal ) , dimension ( 3 , 3 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
Fe ! elastic deformation gradient
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
state ! microstructural state
!*** input/output variables
!*** output variables
real ( pReal ) , dimension ( 3 , 3 ) :: constitutive_nonlocal_dislocationstress
!*** local variables
integer ( pInt ) neighboring_el , & ! element number of neighboring material point
neighboring_ip , & ! integration point of neighboring material point
instance , & ! my instance of this constitution
neighboring_instance , & ! instance of this constitution of neighboring material point
latticeStruct , & ! my lattice structure
neighboring_latticeStruct , & ! lattice structure of neighboring material point
phase , &
neighboring_phase , &
ns , & ! total number of active slip systems at my material point
neighboring_ns , & ! total number of active slip systems at neighboring material point
c , & ! index of dilsocation character (edge, screw)
s , & ! slip system index
t , & ! index of dilsocation type (e+, e-, s+, s-, used e+, used e-, used s+, used s-)
dir , &
deltaX , deltaY , deltaZ , &
side , &
j
integer ( pInt ) , dimension ( 2 , 3 ) :: periodicImages
real ( pReal ) nu , & ! poisson's ratio
x , y , z , & ! coordinates of connection vector in neighboring lattice frame
xsquare , ysquare , zsquare , & ! squares of respective coordinates
distance , & ! length of connection vector
segmentLength , & ! segment length of dislocations
lambda , &
R , Rsquare , Rcube , &
denominator , &
flipSign , &
neighboring_ipVolumeSideLength , &
detFe
real ( pReal ) , dimension ( 3 ) :: connection , & ! connection vector between me and my neighbor in the deformed configuration
connection_neighboringLattice , & ! connection vector between me and my neighbor in the lattice configuration of my neighbor
connection_neighboringSlip , & ! connection vector between me and my neighbor in the slip system frame of my neighbor
maxCoord , minCoord , &
meshSize , &
ipCoords , &
neighboring_ipCoords
real ( pReal ) , dimension ( 3 , 3 ) :: sigma , & ! dislocation stress for one slip system in neighboring material point's slip system frame
Tdislo_neighboringLattice , & ! dislocation stress as 2nd Piola-Kirchhoff stress at neighboring material point
Tdislo , & ! dislocation stress as 2nd Piola-Kirchhoff stress at my material point
invFe , & ! inverse of my elastic deformation gradient
neighboring_invFe , &
neighboringLattice2myLattice ! mapping from neighboring MPs lattice configuration to my lattice configuration
real ( pReal ) , dimension ( 2 , 2 , maxval ( constitutive_nonlocal_totalNslip ) ) :: &
neighboring_rhoExcess ! excess density at neighboring material point (edge/screw,mobile/dead,slipsystem)
real ( pReal ) , dimension ( 2 , maxval ( constitutive_nonlocal_totalNslip ) ) :: &
rhoExcessDead
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 8 ) :: &
rhoSgl ! single dislocation density (edge+, edge-, screw+, screw-, used edge+, used edge-, used screw+, used screw-)
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
rhoForest , & ! forest dislocation density
tauThreshold ! threshold shear stress
logical inversionError
phase = material_phase ( g , ip , el )
instance = phase_constitutionInstance ( phase )
latticeStruct = constitutive_nonlocal_structure ( instance )
ns = constitutive_nonlocal_totalNslip ( instance )
!*** get basic states
forall ( s = 1 : ns , t = 1 : 4 ) &
rhoSgl ( s , t ) = max ( state ( g , ip , el ) % p ( ( t - 1 ) * ns + s ) , 0.0_pReal ) ! ensure positive single mobile densities
forall ( t = 5 : 8 ) &
rhoSgl ( 1 : ns , t ) = state ( g , ip , el ) % p ( ( t - 1 ) * ns + 1 : t * ns )
!*** calculate the dislocation stress of the neighboring excess dislocation densities
!*** zero for material points of local constitution
constitutive_nonlocal_dislocationstress = 0.0_pReal
if ( . not . phase_localConstitution ( phase ) ) then
2012-02-03 18:20:54 +05:30
call math_invert33 ( Fe ( 1 : 3 , 1 : 3 , g , ip , el ) , invFe , detFe , inversionError )
2012-01-17 15:56:57 +05:30
! if (inversionError) then
! return
! endif
!* in case of periodic surfaces we have to find out how many periodic images in each direction we need
do dir = 1 , 3
maxCoord ( dir ) = maxval ( mesh_node0 ( dir , : ) )
minCoord ( dir ) = minval ( mesh_node0 ( dir , : ) )
enddo
meshSize = maxCoord - minCoord
ipCoords = mesh_ipCenterOfGravity ( 1 : 3 , ip , el )
periodicImages = 0_pInt
do dir = 1 , 3
if ( mesh_periodicSurface ( dir ) ) then
periodicImages ( 1 , dir ) = floor ( ( ipCoords ( dir ) - constitutive_nonlocal_R ( instance ) - minCoord ( dir ) ) / meshSize ( dir ) , pInt )
periodicImages ( 2 , dir ) = ceiling ( ( ipCoords ( dir ) + constitutive_nonlocal_R ( instance ) - maxCoord ( dir ) ) / meshSize ( dir ) , pInt )
endif
enddo
!* loop through all material points (also through their periodic images if present),
!* but only consider nonlocal neighbors within a certain cutoff radius R
do neighboring_el = 1 , mesh_NcpElems
ipLoop : do neighboring_ip = 1 , FE_Nips ( mesh_element ( 2 , neighboring_el ) )
neighboring_phase = material_phase ( g , neighboring_ip , neighboring_el )
if ( phase_localConstitution ( neighboring_phase ) ) then
cycle
endif
neighboring_instance = phase_constitutionInstance ( neighboring_phase )
neighboring_latticeStruct = constitutive_nonlocal_structure ( neighboring_instance )
neighboring_ns = constitutive_nonlocal_totalNslip ( neighboring_instance )
2012-01-26 19:20:00 +05:30
call math_invert33 ( Fe ( 1 : 3 , 1 : 3 , 1 , neighboring_ip , neighboring_el ) , neighboring_invFe , detFe , inversionError )
2012-01-17 15:56:57 +05:30
! if (inversionError) then
! return
! endif
neighboring_ipVolumeSideLength = mesh_ipVolume ( neighboring_ip , neighboring_el ) ** ( 1.0_pReal / 3.0_pReal ) ! reference volume used here
forall ( s = 1 : neighboring_ns , c = 1 : 2 ) &
neighboring_rhoExcess ( c , 1 , s ) = state ( g , neighboring_ip , neighboring_el ) % p ( ( 2 * c - 2 ) * neighboring_ns + s ) & ! positive mobiles
- state ( g , neighboring_ip , neighboring_el ) % p ( ( 2 * c - 1 ) * neighboring_ns + s ) ! negative mobiles
forall ( s = 1 : neighboring_ns , c = 1 : 2 ) &
neighboring_rhoExcess ( c , 2 , s ) = abs ( state ( g , neighboring_ip , neighboring_el ) % p ( ( 2 * c + 2 ) * neighboring_ns + s ) ) & ! positive deads
- abs ( state ( g , neighboring_ip , neighboring_el ) % p ( ( 2 * c + 3 ) * neighboring_ns + s ) ) ! negative deads
nu = constitutive_nonlocal_nu ( neighboring_instance )
Tdislo_neighboringLattice = 0.0_pReal
do deltaX = periodicImages ( 1 , 1 ) , periodicImages ( 2 , 1 )
do deltaY = periodicImages ( 1 , 2 ) , periodicImages ( 2 , 2 )
do deltaZ = periodicImages ( 1 , 3 ) , periodicImages ( 2 , 3 )
!* regular case
if ( neighboring_el / = el . or . neighboring_ip / = ip &
. or . deltaX / = 0_pInt . or . deltaY / = 0_pInt . or . deltaZ / = 0_pInt ) then
neighboring_ipCoords = mesh_ipCenterOfGravity ( 1 : 3 , neighboring_ip , neighboring_el ) &
+ ( / real ( deltaX , pReal ) , real ( deltaY , pReal ) , real ( deltaZ , pReal ) / ) * meshSize
connection = neighboring_ipCoords - ipCoords
distance = sqrt ( sum ( connection * connection ) )
if ( distance > constitutive_nonlocal_R ( instance ) ) then
cycle
endif
!* the segment length is the minimum of the third root of the control volume and the ip distance
!* this ensures, that the central MP never sits on a neighboring dislocation segment
connection_neighboringLattice = math_mul33x3 ( neighboring_invFe , connection )
segmentLength = min ( neighboring_ipVolumeSideLength , distance )
2010-10-12 18:38:54 +05:30
2012-01-17 15:56:57 +05:30
!* loop through all slip systems of the neighboring material point
!* and add up the stress contributions from egde and screw excess on these slip systems (if significant)
do s = 1 , neighboring_ns
if ( all ( abs ( neighboring_rhoExcess ( : , : , s ) ) < constitutive_nonlocal_aTolRho ( instance ) ) ) then
cycle ! not significant
endif
!* map the connection vector from the lattice into the slip system frame
connection_neighboringSlip = math_mul33x3 ( constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s , neighboring_instance ) , &
connection_neighboringLattice )
!* edge contribution to stress
sigma = 0.0_pReal
x = connection_neighboringSlip ( 1 )
y = connection_neighboringSlip ( 2 )
z = connection_neighboringSlip ( 3 )
xsquare = x * x
ysquare = y * y
zsquare = z * z
do j = 1 , 2
if ( abs ( neighboring_rhoExcess ( 1 , j , s ) ) < constitutive_nonlocal_aTolRho ( instance ) ) then
cycle
elseif ( j > 1 ) then
x = connection_neighboringSlip ( 1 ) + sign ( 0.5_pReal * segmentLength , &
state ( g , neighboring_ip , neighboring_el ) % p ( 4 * neighboring_ns + s ) &
- state ( g , neighboring_ip , neighboring_el ) % p ( 5 * neighboring_ns + s ) )
xsquare = x * x
endif
flipSign = sign ( 1.0_pReal , - y )
do side = 1 , - 1 , - 2
lambda = real ( side , pReal ) * 0.5_pReal * segmentLength - y
R = sqrt ( xsquare + zsquare + lambda * lambda )
Rsquare = R * R
Rcube = Rsquare * R
denominator = R * ( R + flipSign * lambda )
if ( denominator == 0.0_pReal ) then
exit ipLoop
endif
sigma ( 1 , 1 ) = sigma ( 1 , 1 ) - real ( side , pReal ) * flipSign * z / denominator &
* ( 1.0_pReal + xsquare / Rsquare + xsquare / denominator ) &
* neighboring_rhoExcess ( 1 , j , s )
sigma ( 2 , 2 ) = sigma ( 2 , 2 ) - real ( side , pReal ) * ( flipSign * 2.0_pReal * nu * z / denominator + z * lambda / Rcube ) &
* neighboring_rhoExcess ( 1 , j , s )
sigma ( 3 , 3 ) = sigma ( 3 , 3 ) + real ( side , pReal ) * flipSign * z / denominator &
* ( 1.0_pReal - zsquare / Rsquare - zsquare / denominator ) &
* neighboring_rhoExcess ( 1 , j , s )
sigma ( 1 , 2 ) = sigma ( 1 , 2 ) + real ( side , pReal ) * x * z / Rcube * neighboring_rhoExcess ( 1 , j , s )
sigma ( 1 , 3 ) = sigma ( 1 , 3 ) + real ( side , pReal ) * flipSign * x / denominator &
* ( 1.0_pReal - zsquare / Rsquare - zsquare / denominator ) &
* neighboring_rhoExcess ( 1 , j , s )
sigma ( 2 , 3 ) = sigma ( 2 , 3 ) - real ( side , pReal ) * ( nu / R - zsquare / Rcube ) * neighboring_rhoExcess ( 1 , j , s )
enddo
enddo
!* screw contribution to stress
x = connection_neighboringSlip ( 1 ) ! have to restore this value, because position might have been adapted for edge deads before
do j = 1 , 2
if ( abs ( neighboring_rhoExcess ( 2 , j , s ) ) < constitutive_nonlocal_aTolRho ( instance ) ) then
cycle
elseif ( j > 1 ) then
y = connection_neighboringSlip ( 2 ) + sign ( 0.5_pReal * segmentLength , &
state ( g , neighboring_ip , neighboring_el ) % p ( 6 * neighboring_ns + s ) &
- state ( g , neighboring_ip , neighboring_el ) % p ( 7 * neighboring_ns + s ) )
ysquare = y * y
endif
2010-03-18 17:53:17 +05:30
2012-01-17 15:56:57 +05:30
flipSign = sign ( 1.0_pReal , x )
do side = 1 , - 1 , - 2
lambda = x + real ( side , pReal ) * 0.5_pReal * segmentLength
R = sqrt ( ysquare + zsquare + lambda * lambda )
Rsquare = R * R
Rcube = Rsquare * R
denominator = R * ( R + flipSign * lambda )
if ( denominator == 0.0_pReal ) then
exit ipLoop
endif
sigma ( 1 , 2 ) = sigma ( 1 , 2 ) - real ( side , pReal ) * flipSign * z * ( 1.0_pReal - nu ) / denominator &
* neighboring_rhoExcess ( 2 , j , s )
sigma ( 1 , 3 ) = sigma ( 1 , 3 ) + real ( side , pReal ) * flipSign * y * ( 1.0_pReal - nu ) / denominator &
* neighboring_rhoExcess ( 2 , j , s )
enddo
enddo
if ( all ( abs ( sigma ) < 1.0e-10_pReal ) ) then ! SIGMA IS NOT A REAL STRESS, THATS WHY WE NEED A REALLY SMALL VALUE HERE
cycle
endif
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2012-01-17 15:56:57 +05:30
!* copy symmetric parts
sigma ( 2 , 1 ) = sigma ( 1 , 2 )
sigma ( 3 , 1 ) = sigma ( 1 , 3 )
sigma ( 3 , 2 ) = sigma ( 2 , 3 )
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2012-01-17 15:56:57 +05:30
!* scale stresses and map them into the neighboring material point's lattice configuration
sigma = sigma * constitutive_nonlocal_Gmod ( neighboring_instance ) &
2012-01-25 22:34:37 +05:30
* constitutive_nonlocal_burgers ( s , neighboring_instance ) &
2012-01-17 15:56:57 +05:30
/ ( 4.0_pReal * pi * ( 1.0_pReal - nu ) ) &
* mesh_ipVolume ( neighboring_ip , neighboring_el ) / segmentLength ! reference volume is used here (according to the segment length calculation)
Tdislo_neighboringLattice = Tdislo_neighboringLattice &
2012-01-26 19:20:00 +05:30
+ math_mul33x33 ( math_transpose33 ( constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s , neighboring_instance ) ) , &
2012-01-17 15:56:57 +05:30
math_mul33x33 ( sigma , constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s , neighboring_instance ) ) )
enddo ! slip system loop
2009-12-15 13:50:31 +05:30
2012-01-17 15:56:57 +05:30
!* special case of central ip volume
!* only consider dead dislocations
!* we assume that they all sit at a distance equal to half the third root of V
!* in direction of the according slip direction
else
forall ( s = 1 : ns , c = 1 : 2 ) &
rhoExcessDead ( c , s ) = state ( g , ip , el ) % p ( ( 2 * c + 2 ) * ns + s ) & ! positive deads (here we use symmetry: if this has negative sign it is treated as negative density at positive position instead of positive density at negative position)
+ state ( g , ip , el ) % p ( ( 2 * c + 3 ) * ns + s ) ! negative deads (here we use symmetry: if this has negative sign it is treated as positive density at positive position instead of negative density at negative position)
do s = 1 , ns
if ( all ( abs ( rhoExcessDead ( : , s ) ) < constitutive_nonlocal_aTolRho ( instance ) ) ) then
cycle ! not significant
endif
sigma = 0.0_pReal ! all components except for sigma13 are zero
sigma ( 1 , 3 ) = - ( rhoExcessDead ( 1 , s ) + rhoExcessDead ( 2 , s ) * ( 1.0_pReal - nu ) ) * neighboring_ipVolumeSideLength &
2012-01-25 22:34:37 +05:30
* constitutive_nonlocal_Gmod ( instance ) * constitutive_nonlocal_burgers ( s , instance ) &
2012-01-17 15:56:57 +05:30
/ ( sqrt ( 2.0_pReal ) * pi * ( 1.0_pReal - nu ) )
sigma ( 3 , 1 ) = sigma ( 1 , 3 )
Tdislo_neighboringLattice = Tdislo_neighboringLattice &
2012-01-26 19:20:00 +05:30
+ math_mul33x33 ( math_transpose33 ( constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s , instance ) ) , &
2012-01-17 15:56:57 +05:30
math_mul33x33 ( sigma , constitutive_nonlocal_lattice2slip ( 1 : 3 , 1 : 3 , s , instance ) ) )
enddo ! slip system loop
2009-12-15 13:50:31 +05:30
2012-01-17 15:56:57 +05:30
endif
2009-08-11 22:01:57 +05:30
2012-01-17 15:56:57 +05:30
enddo ! deltaZ loop
enddo ! deltaY loop
enddo ! deltaX loop
2009-08-11 22:01:57 +05:30
2012-01-17 15:56:57 +05:30
!* map the stress from the neighboring MP's lattice configuration into the deformed configuration
!* and back into my lattice configuration
2009-08-11 22:01:57 +05:30
2012-01-17 15:56:57 +05:30
neighboringLattice2myLattice = math_mul33x33 ( invFe , Fe ( 1 : 3 , 1 : 3 , 1 , neighboring_ip , neighboring_el ) )
constitutive_nonlocal_dislocationstress = constitutive_nonlocal_dislocationstress &
+ math_mul33x33 ( neighboringLattice2myLattice , &
math_mul33x33 ( Tdislo_neighboringLattice , &
2012-01-26 19:20:00 +05:30
math_transpose33 ( neighboringLattice2myLattice ) ) )
2012-01-17 15:56:57 +05:30
enddo ipLoop
enddo ! element loop
endif
2009-08-11 22:01:57 +05:30
endfunction
!*********************************************************************
!* return array of constitutive results *
!*********************************************************************
2011-02-25 15:23:20 +05:30
function constitutive_nonlocal_postResults ( Tstar_v , Fe , Temperature , dt , state , dotState , g , ip , el )
2009-08-11 22:01:57 +05:30
2009-08-24 13:46:01 +05:30
use prec , only : pReal , &
pInt , &
p_vec
2012-01-26 19:20:00 +05:30
use math , only : math_mul6x6 , &
2009-12-15 13:50:31 +05:30
math_mul33x3 , &
math_mul33x33 , &
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
pi
2009-08-24 13:46:01 +05:30
use mesh , only : mesh_NcpElems , &
2009-12-15 13:50:31 +05:30
mesh_maxNips , &
2011-02-25 15:23:20 +05:30
mesh_element
2009-08-24 13:46:01 +05:30
use material , only : homogenization_maxNgrains , &
material_phase , &
phase_constitutionInstance , &
phase_Noutput
2009-12-15 13:50:31 +05:30
use lattice , only : lattice_Sslip , &
lattice_Sslip_v , &
lattice_sd , &
lattice_st , &
2012-01-17 15:56:57 +05:30
lattice_maxNslipFamily
2009-08-11 22:01:57 +05:30
implicit none
2009-08-24 13:46:01 +05:30
!*** input variables
2009-12-15 13:50:31 +05:30
integer ( pInt ) , intent ( in ) :: g , & ! current grain number
ip , & ! current integration point
el ! current element number
real ( pReal ) , intent ( in ) :: Temperature , & ! temperature
2011-02-25 15:23:20 +05:30
dt ! time increment
real ( pReal ) , dimension ( 6 ) , intent ( in ) :: Tstar_v ! current 2nd Piola-Kirchhoff stress in Mandel notation
2012-01-17 15:56:57 +05:30
real ( pReal ) , dimension ( 3 , 3 , homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
Fe ! elastic deformation gradient
2009-12-15 13:50:31 +05:30
type ( p_vec ) , dimension ( homogenization_maxNgrains , mesh_maxNips , mesh_NcpElems ) , intent ( in ) :: &
2012-01-17 15:56:57 +05:30
state ! current microstructural state
type ( p_vec ) , intent ( in ) :: dotState ! evolution rate of microstructural state
2009-08-24 13:46:01 +05:30
!*** output variables
real ( pReal ) , dimension ( constitutive_nonlocal_sizePostResults ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2009-12-18 21:16:33 +05:30
constitutive_nonlocal_postResults
2009-08-11 22:01:57 +05:30
2009-08-24 13:46:01 +05:30
!*** local variables
2009-12-15 13:50:31 +05:30
integer ( pInt ) myInstance , & ! current instance of this constitution
myStructure , & ! current lattice structure
ns , & ! short notation for the total number of active slip systems
c , & ! character of dislocation
cs , & ! constitutive result index
o , & ! index of current output
t , & ! type of dislocation
s , & ! index of my current slip system
sLattice ! index of my current slip system according to lattice order
2010-01-05 21:37:24 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 8 ) :: &
rhoSgl , & ! current single dislocation densities (positive/negative screw and edge without dipoles)
rhoDotSgl ! evolution rate of single dislocation densities (positive/negative screw and edge without dipoles)
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 4 ) :: &
2011-11-04 18:42:17 +05:30
gdot , & ! shear rates
v ! velocities
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) ) :: &
2009-12-15 13:50:31 +05:30
rhoForest , & ! forest dislocation density
2010-02-17 18:51:36 +05:30
tauThreshold , & ! threshold shear stress
tau , & ! current resolved shear stress
2012-01-17 15:56:57 +05:30
tauBack , & ! back stress from pileups on same slip system
2009-12-15 13:50:31 +05:30
vClimb ! climb velocity of edge dipoles
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
real ( pReal ) , dimension ( constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 2 ) :: &
2009-12-15 13:50:31 +05:30
rhoDip , & ! current dipole dislocation densities (screw and edge dipoles)
2010-01-05 21:37:24 +05:30
rhoDotDip , & ! evolution rate of dipole dislocation densities (screw and edge dipoles)
2009-12-15 13:50:31 +05:30
dLower , & ! minimum stable dipole distance for edges and screws
2011-02-25 15:23:20 +05:30
dUpper ! current maximum stable dipole distance for edges and screws
2010-02-17 18:51:36 +05:30
real ( pReal ) , dimension ( 3 , constitutive_nonlocal_totalNslip ( phase_constitutionInstance ( material_phase ( g , ip , el ) ) ) , 2 ) :: &
m , & ! direction of dislocation motion for edge and screw (unit vector)
m_currentconf ! direction of dislocation motion for edge and screw (unit vector) in current configuration
2011-02-25 15:23:20 +05:30
real ( pReal ) D ! self diffusion
2011-09-07 17:00:28 +05:30
real ( pReal ) , dimension ( 3 , 3 ) :: sigma
2009-08-24 13:46:01 +05:30
myInstance = phase_constitutionInstance ( material_phase ( g , ip , el ) )
myStructure = constitutive_nonlocal_structure ( myInstance )
ns = constitutive_nonlocal_totalNslip ( myInstance )
2009-08-11 22:01:57 +05:30
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = 0_pInt
2009-08-11 22:01:57 +05:30
constitutive_nonlocal_postResults = 0.0_pReal
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2010-01-06 15:24:00 +05:30
!* short hand notations for state variables
2011-02-09 18:42:46 +05:30
forall ( t = 1 : 8 ) rhoSgl ( 1 : ns , t ) = state ( g , ip , el ) % p ( ( t - 1 ) * ns + 1 : t * ns )
forall ( c = 1 : 2 ) rhoDip ( 1 : ns , c ) = state ( g , ip , el ) % p ( ( 7 + c ) * ns + 1 : ( 8 + c ) * ns )
2010-01-05 21:37:24 +05:30
rhoForest = state ( g , ip , el ) % p ( 10 * ns + 1 : 11 * ns )
2010-02-17 18:51:36 +05:30
tauThreshold = state ( g , ip , el ) % p ( 11 * ns + 1 : 12 * ns )
2012-01-17 15:56:57 +05:30
tauBack = state ( g , ip , el ) % p ( 12 * ns + 1 : 13 * ns )
forall ( t = 1 : 8 ) rhoDotSgl ( 1 : ns , t ) = dotState % p ( ( t - 1 ) * ns + 1 : t * ns )
forall ( c = 1 : 2 ) rhoDotDip ( 1 : ns , c ) = dotState % p ( ( 7 + c ) * ns + 1 : ( 8 + c ) * ns )
2012-01-26 13:13:36 +05:30
forall ( t = 1 : 4 ) v ( 1 : ns , t ) = state ( g , ip , el ) % p ( ( 12 + t ) * ns + 1 : ( 13 + t ) * ns )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2010-01-06 15:24:00 +05:30
!* Calculate shear rate
do t = 1 , 4
do s = 1 , ns
2011-11-04 18:42:17 +05:30
if ( rhoSgl ( s , t + 4 ) * v ( s , t ) < 0.0_pReal ) then
2010-01-06 15:24:00 +05:30
rhoSgl ( s , t ) = rhoSgl ( s , t ) + abs ( rhoSgl ( s , t + 4 ) ) ! remobilization of immobile singles for changing sign of v (bauschinger effect)
rhoSgl ( s , t + 4 ) = 0.0_pReal ! remobilization of immobile singles for changing sign of v (bauschinger effect)
endif
enddo
enddo
2010-10-15 18:49:26 +05:30
2010-10-26 18:46:37 +05:30
forall ( t = 1 : 4 ) &
2012-01-25 22:34:37 +05:30
gdot ( 1 : ns , t ) = rhoSgl ( 1 : ns , t ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance ) * v ( 1 : ns , t )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2011-11-04 18:42:17 +05:30
2011-02-25 15:23:20 +05:30
!* calculate limits for stable dipole height
2010-01-06 15:24:00 +05:30
2010-02-17 18:51:36 +05:30
do s = 1 , ns
sLattice = constitutive_nonlocal_slipSystemLattice ( s , myInstance )
2012-01-17 15:56:57 +05:30
tau ( s ) = math_mul6x6 ( Tstar_v , lattice_Sslip_v ( 1 : 6 , sLattice , myStructure ) ) + tauBack ( s )
2010-02-17 18:51:36 +05:30
enddo
2012-01-25 22:34:37 +05:30
dLower = constitutive_nonlocal_minimumDipoleHeight ( 1 : ns , 1 : 2 , myInstance )
dUpper ( 1 : ns , 2 ) = min ( constitutive_nonlocal_Gmod ( myInstance ) * constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
/ ( 8.0_pReal * pi * abs ( tau ) ) , &
1.0_pReal / sqrt ( sum ( abs ( rhoSgl ) , 2 ) + sum ( rhoDip , 2 ) ) )
dUpper ( 1 : ns , 1 ) = dUpper ( 1 : ns , 2 ) / ( 1.0_pReal - constitutive_nonlocal_nu ( myInstance ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2009-12-15 13:50:31 +05:30
2010-02-17 18:51:36 +05:30
!*** dislocation motion
2009-12-15 13:50:31 +05:30
2011-02-09 18:42:46 +05:30
m ( 1 : 3 , 1 : ns , 1 ) = lattice_sd ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
2011-02-23 13:38:06 +05:30
m ( 1 : 3 , 1 : ns , 2 ) = - lattice_st ( 1 : 3 , constitutive_nonlocal_slipSystemLattice ( 1 : ns , myInstance ) , myStructure )
2010-02-17 18:51:36 +05:30
forall ( c = 1 : 2 , s = 1 : ns ) &
2011-02-25 15:23:20 +05:30
m_currentconf ( 1 : 3 , s , c ) = math_mul33x3 ( Fe , m ( 1 : 3 , s , c ) )
2009-12-15 13:50:31 +05:30
2009-08-24 13:46:01 +05:30
do o = 1 , phase_Noutput ( material_phase ( g , ip , el ) )
select case ( constitutive_nonlocal_output ( o , myInstance ) )
case ( 'rho' )
2010-01-05 21:37:24 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ) , 2 ) + sum ( rhoDip , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2010-01-05 21:37:24 +05:30
case ( 'rho_sgl' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ) , 2 )
cs = cs + ns
case ( 'rho_sgl_mobile' )
2012-01-17 15:56:57 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ( 1 : ns , 1 : 4 ) ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoSgl ( 1 : ns , 5 : 8 ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_dip' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoDip , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'rho_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ( 1 : ns , ( / 1 , 2 , 5 , 6 / ) ) ) , 2 ) + rhoDip ( 1 : ns , 1 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ( 1 : ns , ( / 1 , 2 , 5 , 6 / ) ) ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoSgl ( 1 : ns , 1 : 2 ) , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
2010-01-05 21:37:24 +05:30
case ( 'rho_sgl_edge_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoSgl ( 1 : ns , 5 : 6 ) , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-01-05 21:37:24 +05:30
case ( 'rho_sgl_edge_pos' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 1 ) + abs ( rhoSgl ( 1 : ns , 5 ) )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_pos_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 1 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_pos_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 5 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_neg' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 2 ) + abs ( rhoSgl ( 1 : ns , 6 ) )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_neg_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_edge_neg_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 6 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_dip_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoDip ( 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'rho_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ( 1 : ns , ( / 3 , 4 , 7 , 8 / ) ) ) , 2 ) + rhoDip ( 1 : ns , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( rhoSgl ( 1 : ns , ( / 3 , 4 , 7 , 8 / ) ) ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoSgl ( 1 : ns , 3 : 4 ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoSgl ( 1 : ns , 7 : 8 ) , 2 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_pos' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 3 ) + abs ( rhoSgl ( 1 : ns , 7 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
2010-01-05 21:37:24 +05:30
case ( 'rho_sgl_screw_pos_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 3 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-01-05 21:37:24 +05:30
case ( 'rho_sgl_screw_pos_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 7 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_neg' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 4 ) + abs ( rhoSgl ( 1 : ns , 8 ) )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_neg_mobile' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 4 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_sgl_screw_neg_immobile' )
2011-11-07 21:16:40 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 8 )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_dip_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoDip ( 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2009-08-28 19:20:47 +05:30
case ( 'excess_rho' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = ( rhoSgl ( 1 : ns , 1 ) + abs ( rhoSgl ( 1 : ns , 5 ) ) ) &
- ( rhoSgl ( 1 : ns , 2 ) + abs ( rhoSgl ( 1 : ns , 6 ) ) ) &
+ ( rhoSgl ( 1 : ns , 3 ) + abs ( rhoSgl ( 1 : ns , 7 ) ) ) &
- ( rhoSgl ( 1 : ns , 4 ) + abs ( rhoSgl ( 1 : ns , 8 ) ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-28 19:20:47 +05:30
2010-05-21 14:21:15 +05:30
case ( 'excess_rho_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = ( rhoSgl ( 1 : ns , 1 ) + abs ( rhoSgl ( 1 : ns , 5 ) ) ) &
- ( rhoSgl ( 1 : ns , 2 ) + abs ( rhoSgl ( 1 : ns , 6 ) ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
2010-05-21 14:21:15 +05:30
case ( 'excess_rho_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = ( rhoSgl ( 1 : ns , 3 ) + abs ( rhoSgl ( 1 : ns , 7 ) ) ) &
- ( rhoSgl ( 1 : ns , 4 ) + abs ( rhoSgl ( 1 : ns , 8 ) ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'rho_forest' )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoForest
cs = cs + ns
2009-08-28 19:20:47 +05:30
2010-01-05 21:37:24 +05:30
case ( 'delta' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = 1.0_pReal / sqrt ( sum ( abs ( rhoSgl ) , 2 ) + sum ( rhoDip , 2 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2010-01-05 21:37:24 +05:30
case ( 'delta_sgl' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = 1.0_pReal / sqrt ( sum ( abs ( rhoSgl ) , 2 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-28 19:20:47 +05:30
2010-01-05 21:37:24 +05:30
case ( 'delta_dip' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = 1.0_pReal / sqrt ( sum ( rhoDip , 2 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'shearrate' )
2011-02-11 15:49:41 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( gdot , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'resolvedstress' )
2012-01-17 15:56:57 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = tau
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2009-08-24 13:46:01 +05:30
2012-01-17 15:56:57 +05:30
case ( 'resolvedstress_back' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = tauBack
2010-02-17 18:51:36 +05:30
cs = cs + ns
case ( 'resolvedstress_external' )
do s = 1 , ns
sLattice = constitutive_nonlocal_slipSystemLattice ( s , myInstance )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + s ) = math_mul6x6 ( Tstar_v , lattice_Sslip_v ( 1 : 6 , sLattice , myStructure ) )
2010-02-17 18:51:36 +05:30
enddo
cs = cs + ns
2009-08-24 13:46:01 +05:30
case ( 'resistance' )
2010-02-17 18:51:36 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = tauThreshold
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
case ( 'rho_dot' )
2010-01-05 21:37:24 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoDotSgl , 2 ) + sum ( rhoDotDip , 2 )
cs = cs + ns
case ( 'rho_dot_sgl' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoDotSgl , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
case ( 'rho_dot_dip' )
2010-01-05 21:37:24 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( rhoDotDip , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
case ( 'rho_dot_gen' )
2010-01-05 21:37:24 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( gdot ) , 2 ) * sqrt ( rhoForest ) &
2012-01-25 22:34:37 +05:30
/ constitutive_nonlocal_lambda0 ( 1 : ns , myInstance ) &
/ constitutive_nonlocal_burgers ( 1 : ns , myInstance )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_dot_gen_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( gdot ( 1 : ns , 3 : 4 ) ) , 2 ) * sqrt ( rhoForest ) &
2012-01-25 22:34:37 +05:30
/ constitutive_nonlocal_lambda0 ( 1 : ns , myInstance ) &
/ constitutive_nonlocal_burgers ( 1 : ns , myInstance )
2010-01-05 21:37:24 +05:30
cs = cs + ns
case ( 'rho_dot_gen_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( abs ( gdot ( 1 : ns , 1 : 2 ) ) , 2 ) * sqrt ( rhoForest ) &
2012-01-25 22:34:37 +05:30
/ constitutive_nonlocal_lambda0 ( 1 : ns , myInstance ) &
/ constitutive_nonlocal_burgers ( 1 : ns , myInstance )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
case ( 'rho_dot_sgl2dip' )
2011-02-09 18:42:46 +05:30
do c = 1 , 2 ! dipole formation by glide
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) + &
2012-01-25 22:34:37 +05:30
2.0_pReal * dUpper ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* ( 2.0_pReal * ( rhoSgl ( 1 : ns , 2 * c - 1 ) * abs ( gdot ( 1 : ns , 2 * c ) ) &
+ rhoSgl ( 1 : ns , 2 * c ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) & ! was single hitting single
+ 2.0_pReal * ( abs ( rhoSgl ( 1 : ns , 2 * c + 3 ) ) * abs ( gdot ( 1 : ns , 2 * c ) ) &
+ abs ( rhoSgl ( 1 : ns , 2 * c + 4 ) ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) ) ! was single hitting immobile/used single
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
enddo
cs = cs + ns
case ( 'rho_dot_ann_ath' )
do c = 1 , 2
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) + &
2012-01-25 22:34:37 +05:30
2.0_pReal * dLower ( 1 : ns , c ) / constitutive_nonlocal_burgers ( 1 : ns , myInstance ) &
2011-02-09 18:42:46 +05:30
* ( 2.0_pReal * ( rhoSgl ( 1 : ns , 2 * c - 1 ) * abs ( gdot ( 1 : ns , 2 * c ) ) &
+ rhoSgl ( 1 : ns , 2 * c ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) & ! was single hitting single
+ 2.0_pReal * ( abs ( rhoSgl ( 1 : ns , 2 * c + 3 ) ) * abs ( gdot ( 1 : ns , 2 * c ) ) &
+ abs ( rhoSgl ( 1 : ns , 2 * c + 4 ) ) * abs ( gdot ( 1 : ns , 2 * c - 1 ) ) ) & ! was single hitting immobile/used single
+ rhoDip ( 1 : ns , c ) * ( abs ( gdot ( 1 : ns , 2 * c - 1 ) ) + abs ( gdot ( 1 : ns , 2 * c ) ) ) ) ! single knocks dipole constituent
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
enddo
cs = cs + ns
case ( 'rho_dot_ann_the' )
2011-01-26 15:47:42 +05:30
D = constitutive_nonlocal_Dsd0 ( myInstance ) * exp ( - constitutive_nonlocal_Qsd ( myInstance ) / ( kB * Temperature ) )
2009-08-11 22:01:57 +05:30
2011-02-09 18:42:46 +05:30
vClimb = constitutive_nonlocal_atomicVolume ( myInstance ) * D / ( kB * Temperature ) &
* constitutive_nonlocal_Gmod ( myInstance ) / ( 2.0_pReal * pi * ( 1.0_pReal - constitutive_nonlocal_nu ( myInstance ) ) ) &
* 2.0_pReal / ( dUpper ( 1 : ns , 1 ) + dLower ( 1 : ns , 1 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = 4.0_pReal * rhoDip ( 1 : ns , 1 ) * vClimb / ( dUpper ( 1 : ns , 1 ) - dLower ( 1 : ns , 1 ) )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
! !!! cross-slip of screws missing !!!
cs = cs + ns
2010-02-23 22:53:07 +05:30
2010-03-10 15:19:40 +05:30
case ( 'rho_dot_flux' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 1 : 4 , g , ip , el ) , 2 ) &
+ sum ( abs ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 5 : 8 , g , ip , el ) ) , 2 )
2010-03-10 15:19:40 +05:30
cs = cs + ns
2010-05-21 14:21:15 +05:30
case ( 'rho_dot_flux_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 1 : 2 , g , ip , el ) , 2 ) &
+ sum ( abs ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 5 : 6 , g , ip , el ) ) , 2 )
2010-05-21 14:21:15 +05:30
cs = cs + ns
2010-03-10 15:19:40 +05:30
2010-05-21 14:21:15 +05:30
case ( 'rho_dot_flux_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = sum ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 3 : 4 , g , ip , el ) , 2 ) &
+ sum ( abs ( constitutive_nonlocal_rhoDotFlux ( 1 : ns , 7 : 8 , g , ip , el ) ) , 2 )
2010-05-21 14:21:15 +05:30
cs = cs + ns
2012-01-26 13:13:36 +05:30
case ( 'velocity_edge_pos' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = v ( 1 : ns , 1 )
2010-02-23 22:53:07 +05:30
cs = cs + ns
2012-01-26 13:13:36 +05:30
case ( 'velocity_edge_neg' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = v ( 1 : ns , 2 )
cs = cs + ns
case ( 'velocity_screw_pos' )
2011-11-09 14:52:52 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = v ( 1 : ns , 3 )
cs = cs + ns
2012-01-26 13:13:36 +05:30
case ( 'velocity_screw_neg' )
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = v ( 1 : ns , 4 )
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_pos_x' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 1 ) * v ( 1 : ns , 1 ) * m_currentconf ( 1 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_pos_y' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 1 ) * v ( 1 : ns , 1 ) * m_currentconf ( 2 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_pos_z' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 1 ) * v ( 1 : ns , 1 ) * m_currentconf ( 3 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_neg_x' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 2 ) * v ( 1 : ns , 2 ) * m_currentconf ( 1 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_neg_y' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 2 ) * v ( 1 : ns , 2 ) * m_currentconf ( 2 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_edge_neg_z' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 2 ) * v ( 1 : ns , 2 ) * m_currentconf ( 3 , 1 : ns , 1 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_pos_x' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 3 ) * v ( 1 : ns , 3 ) * m_currentconf ( 1 , 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_pos_y' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 3 ) * v ( 1 : ns , 3 ) * m_currentconf ( 2 , 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_pos_z' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = rhoSgl ( 1 : ns , 3 ) * v ( 1 : ns , 3 ) * m_currentconf ( 3 , 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_neg_x' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 4 ) * v ( 1 : ns , 4 ) * m_currentconf ( 1 , 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_neg_y' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 4 ) * v ( 1 : ns , 4 ) * m_currentconf ( 2 , 1 : ns , 2 )
2009-12-15 13:50:31 +05:30
cs = cs + ns
2010-02-17 18:51:36 +05:30
case ( 'fluxdensity_screw_neg_z' )
2011-11-04 18:42:17 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = - rhoSgl ( 1 : ns , 4 ) * v ( 1 : ns , 4 ) * m_currentconf ( 3 , 1 : ns , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2012-01-25 22:34:37 +05:30
case ( 'maximumdipoleheight_edge' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = dUpper ( 1 : ns , 1 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2012-01-25 22:34:37 +05:30
case ( 'maximumdipoleheight_screw' )
2011-02-09 18:42:46 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = dUpper ( 1 : ns , 2 )
constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal.
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase
constitutive:
- passing of arguments is adapted for constitutive_nonlocal model
crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults
IO:
- changed error message 229
material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal
all:
- added some flush statements
2009-10-20 20:06:03 +05:30
cs = cs + ns
2011-09-07 17:00:28 +05:30
2012-01-17 15:56:57 +05:30
case ( 'dislocationstress' )
sigma = constitutive_nonlocal_dislocationstress ( state , Fe , g , ip , el )
2011-09-07 17:00:28 +05:30
constitutive_nonlocal_postResults ( cs + 1 ) = sigma ( 1 , 1 )
constitutive_nonlocal_postResults ( cs + 2 ) = sigma ( 2 , 2 )
constitutive_nonlocal_postResults ( cs + 3 ) = sigma ( 3 , 3 )
constitutive_nonlocal_postResults ( cs + 4 ) = sigma ( 1 , 2 )
constitutive_nonlocal_postResults ( cs + 5 ) = sigma ( 2 , 3 )
constitutive_nonlocal_postResults ( cs + 6 ) = sigma ( 3 , 1 )
cs = cs + 6_pInt
2011-11-09 14:52:52 +05:30
case ( 'accumulatedshear' )
2012-01-17 15:56:57 +05:30
constitutive_nonlocal_accumulatedShear ( 1 : ns , g , ip , el ) = constitutive_nonlocal_accumulatedShear ( 1 : ns , g , ip , el ) + sum ( gdot , 2 ) * dt
2011-11-09 14:52:52 +05:30
constitutive_nonlocal_postResults ( cs + 1 : cs + ns ) = constitutive_nonlocal_accumulatedShear ( 1 : ns , g , ip , el )
cs = cs + ns
2009-08-11 22:01:57 +05:30
end select
enddo
endfunction
openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:
DON'T use implicit array subscripts:
example: real, dimension(3,3) :: A,B
A(:,2) = B(:,1) <--- DON'T USE
A(1:3,2) = B(1:3,1) <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks.
Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)
Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
2009-08-28 19:20:47 +05:30
END MODULE