DAMASK_EICMD/code/DAMASK_spectral.f90

885 lines
50 KiB
Fortran
Raw Normal View History

! Copyright 2011 Max-Planck-Institut für Eisenforschung GmbH
!
! This file is part of DAMASK,
! the Düsseldorf Advanced MAterial Simulation Kit.
!
! DAMASK is free software: you can redistribute it and/or modify
! it under the terms of the GNU General Public License as published by
! the Free Software Foundation, either version 3 of the License, or
! (at your option) any later version.
!
! DAMASK is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License
! along with DAMASK. If not, see <http://www.gnu.org/licenses/>.
!
!##############################################################
!* $Id$
2010-06-08 15:38:15 +05:30
!********************************************************************
! Material subroutine for BVP solution using spectral method
!
! written by P. Eisenlohr,
! F. Roters,
! L. Hantcherli,
! W.A. Counts,
! D.D. Tjahjanto,
! C. Kords,
! M. Diehl,
2010-06-08 15:38:15 +05:30
! R. Lebensohn
!
! MPI fuer Eisenforschung, Duesseldorf
!
!********************************************************************
! Usage:
! - start program with DAMASK_spectral PathToGeomFile/NameOfGeom.geom
2010-06-08 15:38:15 +05:30
! PathToLoadFile/NameOfLoadFile.load
! - PathToGeomFile will be the working directory
2010-06-08 15:38:15 +05:30
! - make sure the file "material.config" exists in the working
! directory. For further configuration use "numerics.config"
!********************************************************************
program DAMASK_spectral
!********************************************************************
2010-06-08 15:38:15 +05:30
use DAMASK_interface
use prec, only: pInt, pReal
use IO
use math
2011-05-26 14:53:13 +05:30
use mesh, only: mesh_ipCenterOfGravity
use CPFEM, only: CPFEM_general, CPFEM_initAll
use numerics, only: err_div_tol, err_stress_tol, err_stress_tolrel, err_defgrad_tol,&
relevantStrain,itmax, memory_efficient, DAMASK_NumThreadsInt
use homogenization, only: materialpoint_sizeResults, materialpoint_results
!$ use OMP_LIB ! the openMP function library
2010-06-08 15:38:15 +05:30
implicit none
include 'include/fftw3.f' ! header file for fftw3 (declaring variables). Library files are also needed
! compile FFTW 3.2.2 with ./configure --enable-threads
! variables to read from loadcase and geom file
real(pReal), dimension(9) :: valuevector ! stores information temporarily from loadcase file
integer(pInt), parameter :: maxNchunksInput = 26 ! 5 identifiers, 18 values for the matrices and 3 scalars
integer(pInt), dimension (1+maxNchunksInput*2) :: posInput
integer(pInt), parameter :: maxNchunksGeom = 7 ! 4 identifiers, 3 values
integer(pInt), dimension (1+2*maxNchunksGeom) :: posGeom
integer(pInt) unit, N_l, N_s, N_t, N_n, N_freq, N_Fdot ! numbers of identifiers
character(len=1024) path, line
logical gotResolution,gotDimension,gotHomogenization
logical, dimension(9) :: bc_maskvector
! variables storing information from loadcase file
real(pReal) time, time0, timeinc ! elapsed time, begin of interval, time interval
real(pReal), dimension (:,:,:), allocatable :: bc_deformation, & ! applied velocity gradient or time derivative of deformation gradient
bc_stress ! stress BC (if applicable)
real(pReal), dimension(:), allocatable :: bc_timeIncrement ! length of increment
integer(pInt) N_Loadcases, step ! ToDo: rename?
integer(pInt), dimension(:), allocatable :: bc_steps, & ! number of steps
bc_frequency, & ! frequency of result writes
bc_logscale ! linear/logaritmic time step flag
logical, dimension(:), allocatable :: followFormerTrajectory,& ! follow trajectory of former loadcase
velGradApplied ! decide wether velocity gradient or fdot is given
logical, dimension(:,:,:,:), allocatable :: bc_mask ! mask of boundary conditions
! variables storing information from geom file
real(pReal) wgt
real(pReal), dimension(3) :: geomdimension
integer(pInt) homog
integer(pInt), dimension(3) :: resolution
! stress etc.
real(pReal), dimension(3,3) :: ones, zeroes, temp33_Real, damper,&
pstress, pstress_av, cstress_av, defgrad_av,&
defgradAim, defgradAimOld, defgradAimCorr, defgradAimCorrPrev,&
mask_stress, mask_defgrad, deltaF
real(pReal), dimension(3,3,3,3) :: dPdF, c0, s0 !, c0_temp ! ToDo
real(pReal), dimension(6) :: cstress ! cauchy stress in Mandel notation
real(pReal), dimension(6,6) :: dsde, c066, s066 ! Mandel notation of 4th order tensors
real(pReal), dimension(:,:,:,:,:), allocatable :: workfft, defgrad, defgradold
real(pReal), dimension(:,:,:,:), allocatable :: coordinates
! variables storing information for spectral method
complex(pReal) :: img
complex(pReal), dimension(3,3) :: temp33_Complex
real(pReal), dimension(3,3) :: xiDyad
real(pReal), dimension(:,:,:,:,:,:,:), allocatable :: gamma_hat
real(pReal), dimension(:,:,:,:), allocatable :: xi
integer(pInt), dimension(3) :: k_s
integer*8, dimension(2) :: plan_fft
! loop variables, convergence etc.
real(pReal) guessmode, err_div, err_stress, err_defgrad, p_hat_avg
integer(pInt) i, j, k, l, m, n, p
integer(pInt) loadcase, ielem, iter, calcmode, CPFEM_mode, ierr, not_converged_counter
logical errmatinv
real(pReal) temperature ! not used, but needed for call to CPFEM_general
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
integer*8 plan_div(3)
real(pReal), dimension(:,:,:,:), allocatable :: divergence
complex(pReal), dimension(:,:,:,:), allocatable :: divergence_hat
complex(pReal), dimension(:,:,:,:,:), allocatable :: pstress_field_hat, pstress_field
real(pReal) ev1, ev2, ev3
real(pReal), dimension(3,3) :: evb1, evb2, evb3
real(pReal) p_hat_avg_inf, p_hat_avg_two, p_real_avg_inf, p_real_avg_two, &
err_div_avg_inf, err_div_avg_two, err_div_max_inf, err_div_max_two, &
err_div_avg_inf2, err_div_avg_two2, err_div_max_two2, err_div_max_inf2, &
err_real_div_avg_inf, err_real_div_avg_two, err_real_div_max_inf, err_real_div_max_two, &
rho
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
!Initializing
!$ call omp_set_num_threads(DAMASK_NumThreadsInt) ! set number of threads for parallel execution set by DAMASK_NUM_THREADS
bc_maskvector = .false.
unit = 234_pInt
ones = 1.0_pReal; zeroes = 0.0_pReal
img = cmplx(0.0,1.0)
N_l = 0_pInt
N_s = 0_pInt
N_t = 0_pInt
time = 0.0_pReal
N_n = 0_pInt
N_freq = 0_pInt
N_Fdot = 0_pInt
not_converged_counter = 0_pInt
gotResolution =.false.; gotDimension =.false.; gotHomogenization = .false.
resolution = 1_pInt
geomdimension = 0.0_pReal
temperature = 300.0_pReal
if (IargC() /= 2) call IO_error(102) ! check for correct number of given arguments
! Reading the loadcase file and assign variables
path = getLoadcaseName()
print '(a,/,a)', 'Loadcase: ',trim(path)
print '(a,/,a)', 'Workingdir: ',trim(getSolverWorkingDirectoryName())
print '(a,/,a)', 'SolverJobName: ',trim(getSolverJobName())
if (.not. IO_open_file(unit,path)) call IO_error(30,ext_msg = path)
rewind(unit)
do
read(unit,'(a1024)',END = 101) line
if (IO_isBlank(line)) cycle ! skip empty lines
posInput = IO_stringPos(line,maxNchunksInput)
do i = 1, maxNchunksInput, 1
select case (IO_lc(IO_stringValue(line,posInput,i)))
case('l', 'velocitygrad')
N_l = N_l+1
case('fdot')
N_Fdot = N_Fdot+1
case('s', 'stress', 'pk1', 'piolakirchhoff')
N_s = N_s+1
case('t', 'time', 'delta')
N_t = N_t+1
case('n', 'incs', 'increments', 'steps', 'logincs', 'logsteps')
N_n = N_n+1
case('f', 'freq', 'frequency')
N_freq = N_freq+1
end select
enddo ! count all identifiers to allocate memory and do sanity check
enddo
101 N_Loadcases = N_n
if ((N_l + N_Fdot /= N_n).or.(N_n /= N_t)) & ! sanity check
call IO_error(31,ext_msg = path) ! error message for incomplete inp !ToDo:change message
! allocate memory depending on lines in input file
allocate (bc_deformation(3,3,N_Loadcases)); bc_deformation = 0.0_pReal
allocate (bc_stress(3,3,N_Loadcases)); bc_stress = 0.0_pReal
allocate (bc_mask(3,3,2,N_Loadcases)); bc_mask = .false.
allocate (velGradApplied(N_Loadcases)); velGradApplied = .false.
allocate (bc_timeIncrement(N_Loadcases)); bc_timeIncrement = 0.0_pReal
allocate (bc_steps(N_Loadcases)); bc_steps = 0_pInt
allocate (bc_logscale(N_Loadcases)); bc_logscale = 0_pInt
allocate (bc_frequency(N_Loadcases)); bc_frequency = 1_pInt
allocate (followFormerTrajectory(N_Loadcases)); followFormerTrajectory = .true.
rewind(unit)
loadcase = 0_pInt
do
read(unit,'(a1024)',END = 200) line
if (IO_isBlank(line)) cycle ! skip empty lines
loadcase = loadcase + 1
posInput = IO_stringPos(line,maxNchunksInput)
do j = 1,maxNchunksInput,2
select case (IO_lc(IO_stringValue(line,posInput,j)))
case('fdot') ! assign values for the deformation BC matrix (in case of given fdot)
valuevector = 0.0_pReal
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '*'
do k = 1,9
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k)
enddo
bc_mask(:,:,1,loadcase) = transpose(reshape(bc_maskvector,(/3,3/)))
bc_deformation(:,:,loadcase) = math_transpose3x3(reshape(valuevector,(/3,3/)))
case('l','velocitygrad') ! assign values for the deformation BC matrix (in case of given L)
velGradApplied(loadcase) = .true. ! in case of given L, set flag to true
valuevector = 0.0_pReal
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '*'
do k = 1,9
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k)
enddo
bc_mask(:,:,1,loadcase) = transpose(reshape(bc_maskvector,(/3,3/)))
bc_deformation(:,:,loadcase) = math_transpose3x3(reshape(valuevector,(/3,3/)))
case('s', 'stress', 'pk1', 'piolakirchhoff')
valuevector = 0.0_pReal
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '*'
do k = 1,9
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k) ! assign values for the bc_stress matrix
enddo
bc_mask(:,:,2,loadcase) = transpose(reshape(bc_maskvector,(/3,3/)))
bc_stress(:,:,loadcase) = math_transpose3x3(reshape(valuevector,(/3,3/)))
case('t','time','delta') ! increment time
bc_timeIncrement(loadcase) = IO_floatValue(line,posInput,j+1)
case('n','incs','increments','steps') ! bc_steps
bc_steps(loadcase) = IO_intValue(line,posInput,j+1)
case('logincs','logsteps') ! true, if log scale
bc_steps(loadcase) = IO_intValue(line,posInput,j+1)
bc_logscale(loadcase) = 1_pInt
case('f','freq','frequency') ! frequency of result writings
bc_frequency(loadcase) = IO_intValue(line,posInput,j+1)
case('guessreset','dropguessing')
followFormerTrajectory(loadcase) = .false. ! do not continue to predict deformation along former trajectory
end select
enddo; enddo
200 close(unit)
if (followFormerTrajectory(1)) then
call IO_warning(33) ! cannot guess along trajectory for first step of first loadcase
followFormerTrajectory(1) = .false.
endif
do loadcase = 1, N_Loadcases ! consistency checks and output
print *, '------------------------------------------------------'
print '(a,i5)', 'Loadcase:', loadcase
if (.not. followFormerTrajectory(loadcase)) &
print '(a)', 'drop guessing along trajectory'
if (any(bc_mask(:,:,1,loadcase) .and. bc_mask(:,:,2,loadcase)))& ! check whther stress and strain is prescribed simultaneously
call IO_error(31,loadcase)
if (velGradApplied(loadcase)) then
do j = 1, 3
if (any(bc_mask(j,:,1,loadcase) .eqv. .true.) .and.&
any(bc_mask(j,:,1,loadcase) .eqv. .false.)) call IO_error(32,loadcase) ! each line should be either fully or not at all defined
enddo
print '(a,/,3(3(f12.6,x)/))','L:' ,math_transpose3x3(bc_deformation(:,:,loadcase))
print '(a,/,3(3(l,x)/))', 'bc_mask for L:',transpose(bc_mask(:,:,1,loadcase))
else
print '(a,/,3(3(f12.6,x)/))','Fdot:' ,math_transpose3x3(bc_deformation(:,:,loadcase))
print '(a,/,3(3(l,x)/))', 'bc_mask for Fdot:',transpose(bc_mask(:,:,1,loadcase))
endif
print '(a,/,3(3(f12.6,x)/))','bc_stress/MPa:',math_transpose3x3(bc_stress(:,:,loadcase))*1e-6
print '(a,/,3(3(l,x)/))', 'bc_mask for stress:' ,transpose(bc_mask(:,:,2,loadcase))
if (bc_timeIncrement(loadcase) < 0.0_pReal) call IO_error(34,loadcase) ! negative time increment
print '(a,f12.6)','time: ',bc_timeIncrement(loadcase)
if (bc_steps(loadcase) < 1_pInt) call IO_error(35,loadcase) ! non-positive increment count
print '(a,i6)','incs: ',bc_steps(loadcase)
if (bc_frequency(loadcase) < 1_pInt) call IO_error(36,loadcase) ! non-positive result frequency
print '(a,i6)','freq: ',bc_frequency(loadcase)
enddo
!read header of geom file to get the information needed before the complete geom file is intepretated by mesh.f90
path = getModelName()
print *, '------------------------------------------------------'
print '(a,a)', 'GeomName: ',trim(path)
if (.not. IO_open_file(unit,trim(path)//InputFileExtension)) call IO_error(101,ext_msg = trim(path)//InputFileExtension)
rewind(unit)
do
read(unit,'(a1024)',END = 100) line
if (IO_isBlank(line)) cycle ! skip empty lines
posGeom = IO_stringPos(line,maxNchunksGeom)
select case ( IO_lc(IO_StringValue(line,posGeom,1)) )
case ('dimension')
gotDimension = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posGeom,i)))
case('x')
geomdimension(1) = IO_floatValue(line,posGeom,i+1)
case('y')
geomdimension(2) = IO_floatValue(line,posGeom,i+1)
case('z')
geomdimension(3) = IO_floatValue(line,posGeom,i+1)
end select
enddo
case ('homogenization')
gotHomogenization = .true.
homog = IO_intValue(line,posGeom,2)
case ('resolution')
gotResolution = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posGeom,i)))
case('a')
resolution(1) = IO_intValue(line,posGeom,i+1)
case('b')
resolution(2) = IO_intValue(line,posGeom,i+1)
case('c')
resolution(3) = IO_intValue(line,posGeom,i+1)
end select
enddo
end select
if (gotDimension .and. gotHomogenization .and. gotResolution) exit
enddo
100 close(unit)
if(mod(resolution(1),2_pInt)/=0_pInt .or.&
mod(resolution(2),2_pInt)/=0_pInt .or.&
(mod(resolution(3),2_pInt)/=0_pInt .and. resolution(3)/= 1_pInt)) call IO_error(103)
print '(a,/,i4,i4,i4)','resolution a b c:', resolution
print '(a,/,f8.4,f8.5,f8.5)','dimension x y z:', geomdimension
print '(a,i4)','homogenization: ',homog
allocate (defgrad (resolution(1), resolution(2),resolution(3),3,3)); defgrad = 0.0_pReal
allocate (defgradold(resolution(1), resolution(2),resolution(3),3,3)); defgradold = 0.0_pReal
allocate (coordinates(3,resolution(1), resolution(2),resolution(3))); coordinates = 0.0_pReal
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
!allocate (xi (3,resolution(1)/2+1,resolution(2),resolution(3))); xi = 0.0_pReal
allocate (xi (3,resolution(1),resolution(2),resolution(3))); xi = 0.0_pReal
allocate (divergence (resolution(1) ,resolution(2),resolution(3),3)); divergence = 0.0_pReal
allocate (divergence_hat (resolution(1)/2+1,resolution(2),resolution(3),3)); divergence_hat = 0.0_pReal
allocate (pstress_field_hat(resolution(1),resolution(2),resolution(3),3,3)); pstress_field_hat = 0.0_pReal
allocate (pstress_field (resolution(1),resolution(2),resolution(3),3,3)); pstress_field = 0.0_pReal
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
wgt = 1.0_pReal/real(resolution(1)*resolution(2)*resolution(3), pReal)
defgradAim = math_I3
defgradAimOld = math_I3
defgrad_av = math_I3
! Initialization of CPFEM_general (= constitutive law) and of deformation gradient field
call CPFEM_initAll(temperature,1_pInt,1_pInt)
ielem = 0_pInt
c066 = 0.0_pReal
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
defgradold(i,j,k,:,:) = math_I3 ! no deformation at the beginning
defgrad(i,j,k,:,:) = math_I3
ielem = ielem +1
coordinates(1:3,i,j,k) = mesh_ipCenterOfGravity(1:3,1,ielem) ! set to initial coordinates ToDo: SHOULD BE UPDATED TO CURRENT POSITION IN FUTURE REVISIONS!!!
call CPFEM_general(2,coordinates(1:3,i,j,k),math_I3,math_I3,temperature,0.0_pReal,ielem,1_pInt,cstress,dsde,pstress,dPdF)
c066 = c066 + dsde
enddo; enddo; enddo
c066 = c066 * wgt
c0 = math_mandel66to3333(c066) ! linear reference material stiffness
call math_invert(6, math_Mandel66toPlain66(c066), s066,i, errmatinv) ! ToDo
if(errmatinv) call IO_error(800) ! Matrix inversion error ToDo
s0 = math_mandel66to3333(math_Plain66toMandel66(s066)) ! ToDo
do k = 1, resolution(3) ! calculation of discrete angular frequencies, ordered as in FFTW (wrap around)
k_s(3) = k-1
if(k > resolution(3)/2+1) k_s(3) = k_s(3)-resolution(3)
do j = 1, resolution(2)
k_s(2) = j-1
if(j > resolution(2)/2+1) k_s(2) = k_s(2)-resolution(2)
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
!do i = 1, resolution(1)/2+1
! k_s(1) = i-1
do i = 1, resolution(1) !defining full xi vector field (no conjugate complex symmetry)
k_s(1) = i-1
if(i > resolution(1)/2+1) k_s(1) = k_s(1)-resolution(1)
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
xi(3,i,j,k) = 0.0_pReal ! 2D case
if(resolution(3) > 1) xi(3,i,j,k) = real(k_s(3), pReal)/geomdimension(3) ! 3D case
xi(2,i,j,k) = real(k_s(2), pReal)/geomdimension(2)
xi(1,i,j,k) = real(k_s(1), pReal)/geomdimension(1)
enddo; enddo; enddo
if(memory_efficient) then ! allocate just single fourth order tensor
allocate (gamma_hat(1,1,1,3,3,3,3)); gamma_hat = 0.0_pReal
else ! precalculation of gamma_hat field
allocate (gamma_hat(resolution(1)/2+1,resolution(2),resolution(3),3,3,3,3)); gamma_hat = 0.0_pReal
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)/2+1
if (any(xi(:,i,j,k) /= 0.0_pReal)) then
do l = 1,3; do m = 1,3
xiDyad(l,m) = xi(l,i,j,k)*xi(m,i,j,k)
enddo; enddo
temp33_Real = math_inv3x3(math_mul3333xx33(c0, xiDyad))
else
xiDyad = 0.0_pReal
temp33_Real = 0.0_pReal
endif
do l=1,3; do m=1,3; do n=1,3; do p=1,3
gamma_hat(i,j,k, l,m,n,p) = - 0.25*(temp33_Real(l,n)+temp33_Real(n,l)) *&
(xiDyad(m,p)+xiDyad(p,m))
enddo; enddo; enddo; enddo
enddo; enddo; enddo
endif
allocate (workfft(resolution(1)+2,resolution(2),resolution(3),3,3)); workfft = 0.0_pReal
! Initialization of fftw (see manual on fftw.org for more details)
call dfftw_init_threads(ierr)
if(ierr == 0_pInt) call IO_error(104,ierr)
call dfftw_plan_with_nthreads(DAMASK_NumThreadsInt)
call dfftw_plan_many_dft_r2c(plan_fft(1),3,(/resolution(1),resolution(2),resolution(3)/),9,&
workfft,(/resolution(1) +2,resolution(2),resolution(3)/),1,(resolution(1) +2)*resolution(2)*resolution(3),&
workfft,(/resolution(1)/2+1,resolution(2),resolution(3)/),1,(resolution(1)/2+1)*resolution(2)*resolution(3),FFTW_PATIENT)
call dfftw_plan_many_dft_c2r(plan_fft(2),3,(/resolution(1),resolution(2),resolution(3)/),9,&
workfft,(/resolution(1)/2+1,resolution(2),resolution(3)/),1,(resolution(1)/2+1)*resolution(2)*resolution(3),&
workfft,(/resolution(1) +2,resolution(2),resolution(3)/),1,(resolution(1) +2)*resolution(2)*resolution(3),FFTW_PATIENT)
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
call dfftw_plan_many_dft(plan_div(1),3,(/resolution(1),resolution(2),resolution(3)/),9,&
pstress_field,(/resolution(1),resolution(2),resolution(3)/),1,(resolution(1)*resolution(2)*resolution(3)),&
pstress_field_hat, (/resolution(1),resolution(2),resolution(3)/),1,(resolution(1)*resolution(2)*resolution(3)),&
FFTW_FORWARD,FFTW_PATIENT)
call dfftw_plan_many_dft_c2r(plan_div(2),3,(/resolution(1),resolution(2),resolution(3)/),3/3,&
divergence_hat, (/resolution(1)/2+1,resolution(2),resolution(3)/),1,(resolution(1)/2+1)*resolution(2)*resolution(3),&
divergence ,(/resolution(1), resolution(2),resolution(3)/),1, resolution(1)* resolution(2)*resolution(3),&
FFTW_PATIENT)
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
! write header of output file
open(538,file=trim(getSolverWorkingDirectoryName())//trim(getSolverJobName())&
//'.spectralOut',form='UNFORMATTED')
write(538), 'load', trim(getLoadcaseName())
write(538), 'workingdir', trim(getSolverWorkingDirectoryName())
write(538), 'geometry', trim(getSolverJobName())//InputFileExtension
write(538), 'resolution', resolution
write(538), 'dimension', geomdimension
write(538), 'materialpoint_sizeResults', materialpoint_sizeResults
write(538), 'loadcases', N_Loadcases
write(538), 'logscale', bc_logscale ! one entry per loadcase (0: linear, 1: log)
write(538), 'frequencies', bc_frequency ! one entry per loadcase
write(538), 'times', bc_timeIncrement ! one entry per loadcase
bc_steps(1) = bc_steps(1)+1 ! +1 to store initial situation
write(538), 'increments', bc_steps ! one entry per loadcase
bc_steps(1) = bc_steps(1)-1 ! re-adjust for correct looping
write(538), 'eoh' ! end of header
write(538) materialpoint_results(:,1,:) ! initial (non-deformed) results
! Initialization done
!*************************************************************
! Loop over loadcases defined in the loadcase file
do loadcase = 1, N_Loadcases
!*************************************************************
time0 = time ! loadcase start time
if (followFormerTrajectory(loadcase)) then
guessmode = 1.0_pReal
else
guessmode = 0.0_pReal ! change of load case, homogeneous guess for the first step
damper = 1.0_pReal
endif
mask_defgrad = merge(ones,zeroes,bc_mask(:,:,1,loadcase))
mask_stress = merge(ones,zeroes,bc_mask(:,:,2,loadcase))
deltaF = bc_deformation(:,:,loadcase) ! only valid for given fDot. will be overwritten later in case L is given
!*************************************************************
! loop oper steps defined in input file for current loadcase
do step = 1, bc_steps(loadcase)
!*************************************************************
if (bc_logscale(loadcase) == 1_pInt) then ! loglinear scale
if (loadcase == 1_pInt) then ! 1st loadcase of loglinear scale
if (step == 1_pInt) then ! 1st step of 1st loadcase of loglinear scale
timeinc = bc_timeIncrement(1)*(2.0**(1 - bc_steps(1))) ! assume 1st step is equal to 2nd
else ! not-1st step of 1st loadcase of loglinear scale
timeinc = bc_timeIncrement(1)*(2.0**(step - (1 + bc_steps(1))))
endif
else ! not-1st loadcase of loglinear scale
timeinc = time0 * ( ((1.0+bc_timeIncrement(loadcase)/time0)**( step *1.0/(bc_steps(loadcase)))) &
- ((1.0+bc_timeIncrement(loadcase)/time0)**((step-1)*1.0/(bc_steps(loadcase)))) )
endif
else ! linear scale
timeinc = bc_timeIncrement(loadcase)/bc_steps(loadcase)
endif
time = time + timeinc
! update macroscopic deformation gradient (defgrad BC)
if (velGradApplied(loadcase)) & ! calculate deltaF from given L and current F
deltaF = math_mul33x33(bc_deformation(:,:,loadcase), defgradAim)
temp33_Real = defgradAim
defgradAim = defgradAim &
+ guessmode * mask_stress * (defgradAim - defgradAimOld) &
+ mask_defgrad * deltaF * timeinc
defgradAimOld = temp33_Real
! update local deformation gradient
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
temp33_Real = defgrad(i,j,k,:,:)
if (velGradApplied(loadcase)) & ! using velocity gradient to calculate new deformation gradient (if not guessing)
deltaF = math_mul33x33(bc_deformation(:,:,loadcase),defgradold(i,j,k,:,:))
defgrad(i,j,k,:,:) = defgrad(i,j,k,:,:) & ! decide if guessing along former trajectory or apply homogeneous addon (addon only for applied deformation)
+ guessmode * (defgrad(i,j,k,:,:) - defgradold(i,j,k,:,:))&
+ (1.0_pReal-guessmode) * mask_defgrad * deltaF *timeinc
defgradold(i,j,k,:,:) = temp33_Real
enddo; enddo; enddo
guessmode = 1.0_pReal ! keep guessing along former trajectory during same loadcase
if (all(bc_mask(:,:,1,loadcase))) then
calcmode = 1_pInt ! if no stress BC is given (calmode 0 is not needed)
else
calcmode = 0_pInt ! start calculation of BC fulfillment
endif
CPFEM_mode = 1_pInt ! winding forward
iter = 0_pInt
err_div= 2.0_pReal * err_div_tol ! go into loop
defgradAimCorr = 0.0_pReal ! reset damping calculation
!*************************************************************
! convergence loop
do while(iter < itmax .and. &
(err_div > err_div_tol .or. &
err_stress > err_stress_tol .or. &
err_defgrad > err_defgrad_tol))
iter = iter + 1_pInt
if (iter == itmax) not_converged_counter = not_converged_counter + 1
print*, ' '
print '(3(A,I5.5,tr2))', ' Loadcase = ',loadcase, ' Step = ',step, ' Iteration = ',iter
cstress_av = 0.0_pReal
workfft = 0.0_pReal ! needed because of the padding for FFTW
!*************************************************************
! adjust defgrad to fulfill BCs
select case (calcmode)
case (0)
print *, 'Update Stress Field (constitutive evaluation P(F))'
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
call CPFEM_general(3,& ! collect cycle
coordinates(1:3,i,j,k), defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
enddo; enddo; enddo
! c0_temp = 0.0_pReal !for calculation of s0 ToDo
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1_pInt
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
2011-05-26 14:53:13 +05:30
coordinates(1:3,i,j,k),&
defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),& ! others get 2 (saves winding forward effort)
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
CPFEM_mode = 2_pInt
! c0_temp = c0_temp + dPdF ToDo
workfft(i,j,k,:,:) = pstress ! build up average P-K stress
cstress_av = cstress_av + math_mandel6to33(cstress) ! build up average Cauchy stress
enddo; enddo; enddo
! call math_invert(9, math_plain3333to99(c0_temp),s099,i,errmatinv) ToDo
! if(errmatinv) call IO_error(800,ext_msg = "problem in c0 inversion") ToDo
! s0 = math_plain99to3333(s099) *real(resolution(1)*resolution(2)*resolution(3), pReal) ! average s0 for calculation of BC ToDo
cstress_av = cstress_av * wgt
do n = 1,3; do m = 1,3
pstress_av(m,n) = sum(workfft(1:resolution(1),1:resolution(2),1:resolution(3),m,n)) * wgt
defgrad_av(m,n) = sum(defgrad(1:resolution(1),1:resolution(2),1:resolution(3),m,n)) * wgt
enddo; enddo
err_stress = maxval(abs(mask_stress * (pstress_av - bc_stress(:,:,loadcase))))
err_stress_tol = maxval(abs(pstress_av))*0.8*err_stress_tolrel
print*, 'Correcting deformation gradient to fullfill BCs'
defgradAimCorrPrev = defgradAimCorr
defgradAimCorr = - (1.0_pReal - mask_defgrad) & ! allow alteration of all non-fixed defgrad components
* math_mul3333xx33(s0, (mask_stress*(pstress_av - bc_stress(:,:,loadcase)))) ! residual on given stress components
do m=1,3; do n =1,3 ! calculate damper (correction is far too strong) !ToDo: Check for better values
if (defgradAimCorr(m,n) * defgradAimCorrPrev(m,n) < -relevantStrain ** 2.0_pReal) then ! insignificant within relevantstrain around zero
damper(m,n) = max(0.01_pReal,damper(m,n)*0.8)
else
damper(m,n) = min(1.0_pReal,damper(m,n) *1.2)
endif
enddo; enddo
defgradAimCorr = damper * defgradAimCorr
defgradAim = defgradAim + defgradAimCorr
do m = 1,3; do n = 1,3
defgrad(:,:,:,m,n) = defgrad(:,:,:,m,n) + (defgradAim(m,n) - defgrad_av(m,n)) ! anticipated target minus current state
enddo; enddo
err_div = 2.0_pReal * err_div_tol
err_defgrad = maxval(abs(mask_defgrad * (defgrad_av - defgradAim)))
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient:',math_transpose3x3(defgrad_av)
print '(a,/,3(3(f10.4,x)/))', ' Piola-Kirchhoff Stress / MPa: ',math_transpose3x3(pstress_av)/1.e6
print '(2(a,E8.2))', ' error stress: ',err_stress, ' Tol. = ', err_stress_tol
print '(2(a,E8.2))', ' error deformation gradient: ',err_defgrad,' Tol. = ', err_defgrad_tol
if(err_stress < err_stress_tol) then
calcmode = 1_pInt
endif
! Using the spectral method to calculate the change of deformation gradient, check divergence of stress field in fourier space
case (1)
print *, 'Update Stress Field (constitutive evaluation P(F))'
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1_pInt
call CPFEM_general(3, coordinates(1:3,i,j,k), defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
enddo; enddo; enddo
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1_pInt
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
2011-05-26 14:53:13 +05:30
coordinates(1:3,i,j,k),&
defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
CPFEM_mode = 2_pInt
workfft(i,j,k,:,:) = pstress
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
pstress_field(i,j,k,:,:) = pstress
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
cstress_av = cstress_av + math_mandel6to33(cstress)
enddo; enddo; enddo
cstress_av = cstress_av * wgt
do n = 1,3; do m = 1,3
pstress_av(m,n) = sum(workfft(1:resolution(1),1:resolution(2),1:resolution(3),m,n)) * wgt
enddo; enddo
print *, 'Calculating equilibrium using spectral method'
err_div = 0.0_pReal
p_hat_avg = 0.0_pReal
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
p_hat_avg_inf = 0.0_pReal
p_hat_avg_two = 0.0_pReal
p_real_avg_inf = 0.0_pReal
p_real_avg_two = 0.0_pReal
err_div_avg_inf = 0.0_pReal
err_div_avg_inf2 = 0.0_pReal
err_div_avg_two = 0.0_pReal
err_div_avg_two2 = 0.0_pReal
err_div_max_inf = 0.0_pReal
err_div_max_inf2 = 0.0_pReal
err_div_max_two = 0.0_pReal
err_div_max_two2 = 0.0_pReal
err_real_div_avg_inf = 0.0_pReal
err_real_div_avg_two = 0.0_pReal
err_real_div_max_inf = 0.0_pReal
err_real_div_max_two = 0.0_pReal
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
call dfftw_execute_dft_r2c(plan_fft(1),workfft,workfft) ! FFT of pstress
do m = 1,3 ! L infinity norm of stress tensor
p_hat_avg = max(p_hat_avg, sum(abs(workfft(1,1,1,:,m)))) ! ignore imaginary part as it is always zero (Nyquist freq for real only input)
enddo
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
call dfftw_execute_dft(plan_div(1),pstress_field,pstress_field_hat)
p_hat_avg_inf = p_hat_avg ! using L inf norm as criterion
! L2 matrix norm, NuMI Skript, LNM, TU Muenchen p. 47, again ignore imaginary part
call math_spectral1(math_mul33x33(workfft(1,1,1,:,:),math_transpose3x3(workfft(1,1,1,:,:))),ev1,ev2,ev3,evb1,evb2,evb3)
rho = max (ev1,ev2,ev3)
p_hat_avg_two = sqrt(rho)
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)/2+1
err_div = max(err_div, maxval(abs(math_mul33x3_complex(workfft(i*2-1,j,k,:,:)+& ! maximum of L infinity norm of div(stress), Suquet 2001
workfft(i*2, j,k,:,:)*img,xi(:,i,j,k)*minval(geomdimension)))))
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
err_div_max_two = max(err_div_max_two,abs(sqrt(sum(math_mul33x3_complex(workfft(i*2-1,j,k,:,:)+& ! maximum of L two norm of div(stress), Suquet 2001
workfft(i*2, j,k,:,:)*img,xi(:,i,j,k)*minval(geomdimension)))**2.0)))
err_div_avg_inf = err_div_avg_inf + (maxval(abs(math_mul33x3_complex(workfft(i*2-1,j,k,:,:)+& ! sum of squared L infinity norm of div(stress), Suquet 1998
workfft(i*2, j,k,:,:)*img,xi(:,i,j,k)*minval(geomdimension)))))**2.0
err_div_avg_two = err_div_avg_two + abs(sum((math_mul33x3_complex(workfft(i*2-1,j,k,:,:)+& ! sum of squared L2 norm of div(stress) ((sqrt())**2 missing), Suquet 1998
workfft(i*2, j,k,:,:)*img,xi(:,i,j,k)*minval(geomdimension)))**2.0))
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
enddo; enddo; enddo
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
do i = 0, resolution(1)/2-2 ! reconstruct data of conjugated complex (symmetric) part in Fourier space
m = 1
do k = 1, resolution(3)
n = 1
do j = 1, resolution(2)
err_div_avg_inf = err_div_avg_inf + (maxval(abs(math_mul33x3_complex&
(workfft(3+2*i,n,m,:,:)+workfft(4+i*2,n,m,:,:)*img,xi(:,resolution(1)-i,j,k)*minval(geomdimension)))))**2.0
err_div_avg_two = err_div_avg_two + abs(sum((math_mul33x3_complex(workfft(3+2*i,n,m,:,:)+workfft(4+i*2,n,m,:,:)*img,&
xi(:,resolution(1)-i,j,k)*minval(geomdimension)))**2.0))
! workfft(resolution(1)-i,j,k,:,:) = conjg(workfft(2+i,n,m,:,:)) original code for complex array, above little bit confusing because compley data is stored in real array
if(n == 1) n = resolution(2) +1
n = n-1
enddo
if(m == 1) m = resolution(3) +1
m = m -1
enddo; enddo
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1) !calculating divergence criteria for full field (no complex symmetry)
err_div_max_two2 = max(err_div_max_two,abs(sqrt(sum(math_mul33x3_complex(pstress_field_hat(i,j,k,:,:),xi(:,i,j,k)*&
minval(geomdimension)))**2.0)))
err_div_max_inf2 = max(err_div_max_inf2 , (maxval(abs(math_mul33x3_complex(pstress_field_hat(i,j,k,:,:),xi(:,i,j,k)*&
minval(geomdimension))))))
err_div_avg_inf2 = err_div_avg_inf2 + (maxval(abs(math_mul33x3_complex(pstress_field_hat(i,j,k,:,:),&
xi(:,i,j,k)*minval(geomdimension)))))**2.0
err_div_avg_two2 = err_div_avg_two2 + abs(sum((math_mul33x3_complex(pstress_field_hat(i,j,k,:,:),&
xi(:,i,j,k)*minval(geomdimension)))**2.0))
enddo; enddo; enddo
err_div_max_inf = err_div ! using L inf norm as criterion, others will be just printed on screen
err_div_max_inf = err_div_max_inf/p_hat_avg_inf
err_div_max_inf2 = err_div_max_inf2/p_hat_avg_inf
err_div_max_two = err_div_max_two/p_hat_avg_two
err_div_max_two2 = err_div_max_two2/p_hat_avg_two
err_div_avg_inf = sqrt(err_div_avg_inf*wgt)/p_hat_avg_inf
err_div_avg_two = sqrt(err_div_avg_two*wgt)/p_hat_avg_two
err_div_avg_inf2 = sqrt(err_div_avg_inf2*wgt)/p_hat_avg_inf
err_div_avg_two2 = sqrt(err_div_avg_two2*wgt)/p_hat_avg_two
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
err_div = err_div/p_hat_avg !weigthting of error by average stress (L infinity norm)
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
!divergence in real space
do k = 1, resolution(3) ! calculation of discrete angular frequencies, ordered as in FFTW (wrap around)
k_s(3) = k-1
if(k > resolution(3)/2+1) k_s(3) = k_s(3)-resolution(3)
do j = 1, resolution(2)
k_s(2) = j-1
if(j > resolution(2)/2+1) k_s(2) = k_s(2)-resolution(2)
do i = 1, resolution(1)/2+1
k_s(1) = i-1
divergence_hat(i,j,k,1) = (workfft(i*2-1,j,k,1,1)+ workfft(i*2,j,k,1,1)*img)*(real(k_s(1))*img*pi*2.0)/geomdimension(1)&
+ (workfft(i*2-1,j,k,2,1)+ workfft(i*2,j,k,2,1)*img)*(real(k_s(2))*img*pi*2.0)/geomdimension(2)&
+ (workfft(i*2-1,j,k,3,1)+ workfft(i*2,j,k,3,1)*img)*(real(k_s(3))*img*pi*2.0)/geomdimension(3)
divergence_hat(i,j,k,2) = (workfft(i*2-1,j,k,1,2)+ workfft(i*2,j,k,1,2)*img)*(real(k_s(1))*img*pi*2.0)/geomdimension(1)&
+ (workfft(i*2-1,j,k,2,2)+ workfft(i*2,j,k,2,2)*img)*(real(k_s(2))*img*pi*2.0)/geomdimension(2)&
+ (workfft(i*2-1,j,k,3,2)+ workfft(i*2,j,k,3,2)*img)*(real(k_s(3))*img*pi*2.0)/geomdimension(3)
divergence_hat(i,j,k,3) = (workfft(i*2-1,j,k,1,3)+ workfft(i*2,j,k,1,3)*img)*(real(k_s(1))*img*pi*2.0)/geomdimension(1)&
+ (workfft(i*2-1,j,k,2,3)+ workfft(i*2,j,k,2,3)*img)*(real(k_s(2))*img*pi*2.0)/geomdimension(2)&
+ (workfft(i*2-1,j,k,3,3)+ workfft(i*2,j,k,3,3)*img)*(real(k_s(3))*img*pi*2.0)/geomdimension(3)
enddo; enddo; enddo
call dfftw_execute_dft_c2r(plan_div(2), divergence_hat, divergence)
divergence = divergence*wgt
do m = 1,3 ! L infinity norm of stress tensor
p_real_avg_inf = max(p_real_avg_inf, sum(abs(pstress_av(:,m))))
enddo
call math_spectral1(math_mul33x33(pstress_av,math_transpose3x3(pstress_av)),ev1,ev2,ev3,evb1,evb2,evb3)
rho = max (ev1,ev2,ev3)
p_real_avg_two = sqrt(rho)
do k = 1, resolution(3); do j = 1, resolution(2) ;do i = 1, resolution(1)
err_real_div_max_inf = max(err_real_div_max_inf, maxval(divergence(i,j,k,:)))
err_real_div_max_two = max(err_real_div_max_two, sqrt(sum(divergence(i,j,k,:)**2.0)))
err_real_div_avg_inf = err_real_div_avg_inf + (maxval(divergence(i,j,k,:)))**2.0
err_real_div_avg_two = err_real_div_avg_two + sum(divergence(i,j,k,:)**2.0) ! don't take square root just to square it again
enddo; enddo; enddo
err_real_div_max_inf = err_real_div_max_inf/p_real_avg_inf
err_real_div_max_two = err_real_div_max_two/p_real_avg_two
err_real_div_avg_inf = sqrt(err_real_div_avg_inf*wgt)/p_real_avg_inf
err_real_div_avg_two = sqrt(err_real_div_avg_two*wgt)/p_real_avg_two
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
if(memory_efficient) then ! memory saving version, on-the-fly calculation of gamma_hat
do k = 1, resolution(3); do j = 1, resolution(2) ;do i = 1, resolution(1)/2+1
if (any(xi(:,i,j,k) /= 0.0_pReal)) then
do l = 1,3; do m = 1,3
xiDyad(l,m) = xi(l,i,j,k)*xi(m,i,j,k)
enddo; enddo
temp33_Real = math_inv3x3(math_mul3333xx33(c0, xiDyad))
else
xiDyad = 0.0_pReal
temp33_Real = 0.0_pReal
endif
do l=1,3; do m=1,3; do n=1,3; do p=1,3
gamma_hat(1,1,1, l,m,n,p) = - 0.25_pReal*(temp33_Real(l,n)+temp33_Real(n,l))*&
(xiDyad(m,p) +xiDyad(p,m))
enddo; enddo; enddo; enddo
do m = 1,3; do n = 1,3
temp33_Complex(m,n) = sum(gamma_hat(1,1,1,m,n,:,:) *(workfft(i*2-1,j,k,:,:)&
+workfft(i*2 ,j,k,:,:)*img))
enddo; enddo
workfft(i*2-1,j,k,:,:) = real (temp33_Complex) ! change of average strain
workfft(i*2 ,j,k,:,:) = aimag(temp33_Complex)
enddo; enddo; enddo
else ! use precalculated gamma-operator
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)/2+1
do m = 1,3; do n = 1,3
temp33_Complex(m,n) = sum(gamma_hat(i,j,k, m,n,:,:) *(workfft(i*2-1,j,k,:,:)&
+ workfft(i*2 ,j,k,:,:)*img))
enddo; enddo
workfft(i*2-1,j,k,:,:) = real (temp33_Complex) ! change of average strain
workfft(i*2 ,j,k,:,:) = aimag(temp33_Complex)
enddo; enddo; enddo
endif
workfft(1,1,1,:,:) = defgrad_av - math_I3 ! zero frequency (real part)
workfft(2,1,1,:,:) = 0.0_pReal ! zero frequency (imaginary part)
call dfftw_execute_dft_c2r(plan_fft(2),workfft,workfft)
defgrad = defgrad + workfft(1:resolution(1),:,:,:,:)*wgt
do m = 1,3; do n = 1,3
defgrad_av(m,n) = sum(defgrad(:,:,:,m,n))*wgt
defgrad(:,:,:,m,n) = defgrad(:,:,:,m,n) + mask_defgrad(m,n)*(defgradAim(m,n) - defgrad_av(m,n)) ! anticipated target minus current state on components with prescribed deformation
enddo; enddo
err_stress = maxval(abs(mask_stress * (pstress_av - bc_stress(:,:,loadcase))))
err_stress_tol = maxval(abs(pstress_av))*err_stress_tolrel ! accecpt relative error specified
err_defgrad = maxval(abs(mask_defgrad * (defgrad_av - defgradAim)))
print '(2(a,E8.2))', ' error divergence: ',err_div, ' Tol. = ', err_div_tol
!!!!!!!!!!!!!!!!!!!!!!!! start divergence debugging
print '((a,E12.7))', ' error divergence FT (max,inf): ',err_div_max_inf
print '((a,E12.7))', ' error divergence FT (max,inf2): ',err_div_max_inf2
print '((a,E12.7))', ' error divergence FT (max,two): ',err_div_max_two
print '((a,E12.7))', ' error divergence FT (max,two2): ',err_div_max_two2
print '((a,E12.6))', ' error divergence FT (avg,inf): ',err_div_avg_inf
print '((a,E12.6))', ' error divergence FT (avg,inf2): ',err_div_avg_inf2
print '((a,E12.7))', ' error divergence FT (avg,two): ',err_div_avg_two
print '((a,E12.7))', ' error divergence FT (avg,two2): ',err_div_avg_two2
print '((a,E8.2))', ' error divergence Real (max,inf): ',err_real_div_max_inf
print '((a,E8.2))', ' error divergence Real (max,two): ',err_real_div_max_two
print '((a,E8.2))', ' error divergence Real (avg,inf): ',err_real_div_avg_inf
print '((a,E8.2))', ' error divergence Real (avg,two): ',err_real_div_avg_two
!!!!!!!!!!!!!!!!!!!!!!!! end divergence debugging
print '(2(a,E8.2))', ' error stress: ',err_stress, ' Tol. = ', err_stress_tol
print '(2(a,E8.2))', ' error deformation gradient: ',err_defgrad,' Tol. = ', err_defgrad_tol
if((err_stress > err_stress_tol .or. err_defgrad > err_defgrad_tol) .and. err_div < err_div_tol) then ! change to calculation of BCs, reset damper etc.
calcmode = 0_pInt
defgradAimCorr = 0.0_pReal
damper = damper * 0.9_pReal
endif
end select
enddo ! end looping when convergency is achieved
if (mod(step,bc_frequency(loadcase)) == 0_pInt) & ! at output frequency
write(538) materialpoint_results(:,1,:) ! write result to file
print '(A)', '------------------------------------------------------------'
print '(a,x,f12.7)' , ' Determinant of Deformation Aim: ', math_det3x3(defgradAim)
print '(a,/,3(3(f12.7,x)/))', ' Deformation Aim: ',math_transpose3x3(defgradAim)
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient:',math_transpose3x3(defgrad_av)
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress / MPa: ',math_transpose3x3(cstress_av)/1.e6
print '(a,/,3(3(f10.4,x)/))', ' Piola-Kirchhoff Stress / MPa: ',math_transpose3x3(pstress_av)/1.e6
print '(A)', '************************************************************'
enddo ! end looping over steps in current loadcase
enddo ! end looping over loadcases
print '(a,i10,a)', 'A Total of ', not_converged_counter, ' Steps did not converge!'
close(538)
call dfftw_destroy_plan(plan_fft(1)); call dfftw_destroy_plan(plan_fft(2))
end program DAMASK_spectral
!********************************************************************
! quit subroutine to satisfy IO_error
!
!********************************************************************
2010-06-08 15:38:15 +05:30
subroutine quit(id)
use prec
implicit none
integer(pInt) id
stop
end subroutine