223031012
/
DAMASK_EICMD
mirror of https://github.com/achalhp/DAMASK_EICMD.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
DAMASK_EICMD/code/CPFEM.f90

374 lines
19 KiB
Fortran
Raw Normal View History

added version information to all files do NOT edit text like this: $Id: constitutive_phenopowerlaw.f90 406 2009-08-31 14:13:10Z MPIE\f.roters $
2009-08-31 20:39:15 +05:30
!* $Id$
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!##############################################################
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
MODULE CPFEM
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!##############################################################
! *** CPFEM engine ***
!
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use prec, only: pReal, &
pInt
implicit none
real(pReal), parameter :: CPFEM_odd_stress = 1e15_pReal, &
CPFEM_odd_jacobian = 1e50_pReal
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
real(pReal), dimension (:,:,:), allocatable :: CPFEM_cs ! Cauchy stress
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE ! Cauchy stress tangent
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE_knownGood ! known good tangent
introduced racing condition breaker for the case of multithreaded CPFEM init.
2010-02-02 20:30:08 +05:30
logical :: CPFEM_init_done = .false., & ! remember whether init has been done already
CPFEM_init_inProgress = .false., & ! remember whether first IP is currently performing init
CPFEM_calc_done = .false. ! remember whether first IP has already calced the results
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CONTAINS
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!*********************************************************
!*** allocate the arrays defined in module CPFEM ***
!*** and initialize them ***
!*********************************************************
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
subroutine CPFEM_init()
use prec, only: pInt
use FEsolving, only: parallelExecution, &
symmetricSolver
use mesh, only: mesh_NcpElems, &
mesh_maxNips
implicit none
! initialize stress and jacobian to zero
allocate(CPFEM_cs(6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_cs = 0.0_pReal
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
allocate(CPFEM_dcsdE(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE = 0.0_pReal
allocate(CPFEM_dcsdE_knownGood(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE_knownGood = 0.0_pReal
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!$OMP CRITICAL (write2out)
write(6,*)
write(6,*) '<<<+- cpfem init -+>>>'
added version information to all files do NOT edit text like this: $Id: constitutive_phenopowerlaw.f90 406 2009-08-31 14:13:10Z MPIE\f.roters $
2009-08-31 20:39:15 +05:30
write(6,*) '$Id$'
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
write(6,*)
write(6,'(a32,x,6(i5,x))') 'CPFEM_cs: ', shape(CPFEM_cs)
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
write(6,'(a32,x,6(i5,x))') 'CPFEM_dcsdE: ', shape(CPFEM_dcsdE)
write(6,'(a32,x,6(i5,x))') 'CPFEM_dcsdE_knownGood: ', shape(CPFEM_dcsdE_knownGood)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
write(6,*)
write(6,*) 'parallelExecution: ', parallelExecution
write(6,*) 'symmetricSolver: ', symmetricSolver
call flush(6)
!$OMP END CRITICAL (write2out)
return
endsubroutine
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!***********************************************************************
!*** perform initialization at first call, update variables and ***
!*** call the actual material model ***
!***********************************************************************
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
subroutine CPFEM_general(mode, ffn, ffn1, Temperature, dt, element, IP, cauchyStress, jacobian)
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
! note: cauchyStress = Cauchy stress cs(6) and jacobian = Consistent tangent dcs/dE
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** variables and functions from other modules ***!
use prec, only: pReal, &
forgot to "use" the new init-routines
2009-08-31 20:51:15 +05:30
pInt, &
prec_init
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use numerics, only: numerics_init, &
relevantStrain, &
iJacoStiffness
constitutive_nonlocal: - reworked contribution of immobile dislocation density for rate equations - flux is now calculated on the basis of interpolated velocities and densities at the interface; both incoming and outgoing fluxes are considered, so every material point only changes his own dotState - dislocation velocity is now globally defined and calculated by subroutine constitutive_nonlocal_kinetics; the subroutine is called inside _LpAndItsTangent as well as _microstructure; therefore, microstructure now needs Tstar_v as additional input; in the future one should perhaps create a subroutine constitutive_kinetics that calls constitutive_nonlocal_kinetics separately, to clearly distinguish between microstructural and kinetic variables - better use flux density vector as output variable instead of scalar flux values for each interface - added output variables internal and external resolved stress crystallite: - added flag to force local stiffness calculation in case of nonlocal model - misorientation angle is explicitly set to zero when no neighbor can be found debug: - added flag "selectiveDebugger" that is used when debugging statements should only affect a specific element, ip and grain; these are specified with the new variables debug_e, debug_i and debug_g - debugger can now be used in its original sense
2010-02-17 18:51:36 +05:30
use debug, only: debug_init, &
debug_g, &
debug_i, &
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
debug_e, &
debugger, &
verboseDebugger
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use FEsolving, only: FE_init, &
parallelExecution, &
outdatedFFN1, &
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
terminallyIll, &
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
cycleCounter, &
theInc, &
theTime, &
FEsolving_execElem, &
FEsolving_execIP
use math, only: math_init, &
math_identity2nd, &
math_mul33x33, &
math_det3x3, &
math_I3, &
math_Mandel3333to66, &
math_Mandel33to6
use mesh, only: mesh_init, &
mesh_FEasCP, &
mesh_NcpElems, &
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
mesh_maxNips
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use lattice, only: lattice_init
use material, only: material_init, &
the latest RGC model + corrections for "element homogeneous" feature
2010-03-24 18:50:12 +05:30
homogenization_maxNgrains, &
microstructure_elemhomo
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use constitutive, only: constitutive_init,&
constitutive_state0,constitutive_state
use crystallite, only: crystallite_init, &
crystallite_F0, &
the latest RGC model + corrections for "element homogeneous" feature
2010-03-24 18:50:12 +05:30
crystallite_rexParm, &
crystallite_critVal, &
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
crystallite_partionedF, &
crystallite_Fp0, &
crystallite_Fp, &
crystallite_Lp0, &
constitutive_nonlocal: - dipole dislocations with evolution crystallite.f90: - collect state uses subdt and subTstar0_v - in nonlocal modus: set all crystallites to broken if one is not on track anymore after either stress integration or state update - constitutive_microstructure is now called inside state update and not in integrate_stress anymore material.config: - new parameter for nonlocal constitution CPFEM.f90: - age Tstar after increment was finished
2009-08-28 19:20:47 +05:30
crystallite_Lp, &
crystallite_Tstar0_v, &
crystallite_Tstar_v
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use homogenization, only: homogenization_init, &
homogenization_sizeState, &
homogenization_state, &
homogenization_state0, &
materialpoint_F, &
materialpoint_F0, &
materialpoint_P, &
materialpoint_dPdF, &
the latest RGC model + corrections for "element homogeneous" feature
2010-03-24 18:50:12 +05:30
materialpoint_results, &
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
materialpoint_Temperature, &
materialpoint_stressAndItsTangent, &
materialpoint_postResults
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
use IO, only: IO_init
use cpfem_interface
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
implicit none
!*** input variables ***!
integer(pInt), intent(in) :: element, & ! FE element number
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
IP ! FE integration point number
Major Update: all modules are now correctly submitted
2009-07-01 16:25:31 +05:30
real(pReal), intent(inout) :: Temperature ! temperature
real(pReal), intent(in) :: dt ! time increment
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
real(pReal), dimension (3,3), intent(in) :: ffn, & ! deformation gradient for t=t0
ffn1 ! deformation gradient for t=t1
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
integer(pInt), intent(in) :: mode ! computation mode 1: regular computation plus aging of results
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! 2: regular computation
! 3: collection of FEM data
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
! 4: backup tangent from former converged inc
! 5: restore tangent from former converged inc
! 6: recycling of former results (MARC speciality)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** output variables ***!
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
real(pReal), dimension(6), intent(out) :: cauchyStress ! stress vector in Mandel notation
real(pReal), dimension(6,6), intent(out) :: jacobian ! jacobian in Mandel notation
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** local variables ***!
Introduce a randomness in the odd stress, using pre-factor rnd.
2009-12-09 16:03:00 +05:30
real(pReal) J_inverse, & ! inverse of Jacobian
rnd
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
real(pReal), dimension (3,3) :: Kirchhoff
real(pReal), dimension (3,3,3,3) :: H, &
H_sym
integer(pInt) cp_en, & ! crystal plasticity element number
i, &
j, &
k, &
l, &
m, &
n
logical updateJaco ! flag indicating if JAcobian has to be updated
!*** global variables ***!
! CPFEM_cs, &
! CPFEM_dcsdE, &
! CPFEM_dcsdE_knownGood, &
! CPFEM_init_done, &
! CPFEM_calc_done, &
! CPFEM_odd_stress, &
! CPFEM_odd_jacobian
! initialization step (three dimensional stress state check missing?)
if (.not. CPFEM_init_done) then
introduced racing condition breaker for the case of multithreaded CPFEM init.
2010-02-02 20:30:08 +05:30
call random_number(rnd)
do i=1,int(256.0*rnd)
n = n+1_pInt ! wasting random amount of time...
enddo ! ...to break potential race in multithreading
n = n+1_pInt
if (.not. CPFEM_init_inProgress) then ! yes my thread won!
CPFEM_init_inProgress = .true.
call prec_init()
call IO_init()
call numerics_init()
call debug_init()
call math_init()
call FE_init()
call mesh_init(IP, element) ! pass on coordinates to alter calcMode of first ip
call lattice_init()
call material_init()
call constitutive_init()
call crystallite_init(Temperature) ! (have to) use temperature of first IP for whole model
call homogenization_init(Temperature)
call CPFEM_init()
call mpie_cpfem_init()
CPFEM_init_done = .true.
CPFEM_init_inProgress = .false.
else ! loser, loser...
do while (CPFEM_init_inProgress)
end do
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
endif
cp_en = mesh_FEasCP('elem',element)
if (cp_en == 1 .and. IP == 1) then
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
if (debugger) then
!$OMP CRITICAL (write2out)
write(6,*)
write(6,*) '#####################################'
write(6,'(a10,x,f8.4,x,a10,x,f8.4,x,a10,x,i6,x,a10,x,i3,x,a16,x,i2,x,a16,x,i2)') &
'theTime',theTime,'theDelta',theDelta,'theInc',theInc,'cycleCounter',cycleCounter,'computationMode',mode
write(6,*) '#####################################'
call flush (6)
!$OMP END CRITICAL (write2out)
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
endif
! according to our "mode" we decide what to do
select case (mode)
! --+>> REGULAR COMPUTATION (WITH AGING OF RESULTS IF MODE == 1) <<+--
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (1,2,8,9)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! age results if mode == 1
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
if (mode == 1 .or. mode == 8) then
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
crystallite_F0 = crystallite_partionedF ! crystallite deformation (_subF is perturbed...)
crystallite_Fp0 = crystallite_Fp ! crystallite plastic deformation
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
crystallite_Lp0 = crystallite_Lp ! crystallite plastic velocity
constitutive_nonlocal: - dipole dislocations with evolution crystallite.f90: - collect state uses subdt and subTstar0_v - in nonlocal modus: set all crystallites to broken if one is not on track anymore after either stress integration or state update - constitutive_microstructure is now called inside state update and not in integrate_stress anymore material.config: - new parameter for nonlocal constitution CPFEM.f90: - age Tstar after increment was finished
2009-08-28 19:20:47 +05:30
crystallite_Tstar0_v = crystallite_Tstar_v ! crystallite 2nd Piola Kirchhoff stress
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
forall ( i = 1:homogenization_maxNgrains, &
j = 1:mesh_maxNips, &
k = 1:mesh_NcpElems ) &
constitutive_state0(i,j,k)%p = constitutive_state(i,j,k)%p ! microstructure of crystallites
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
if (debugger) then
!$OMP CRITICAL (write2out)
write(6,'(a,3(x,i4),/,4(3(e20.8,x),/))') 'aged state at', debug_g, debug_i, debug_e, &
constitutive_nonlocal: - reworked contribution of immobile dislocation density for rate equations - flux is now calculated on the basis of interpolated velocities and densities at the interface; both incoming and outgoing fluxes are considered, so every material point only changes his own dotState - dislocation velocity is now globally defined and calculated by subroutine constitutive_nonlocal_kinetics; the subroutine is called inside _LpAndItsTangent as well as _microstructure; therefore, microstructure now needs Tstar_v as additional input; in the future one should perhaps create a subroutine constitutive_kinetics that calls constitutive_nonlocal_kinetics separately, to clearly distinguish between microstructural and kinetic variables - better use flux density vector as output variable instead of scalar flux values for each interface - added output variables internal and external resolved stress crystallite: - added flag to force local stiffness calculation in case of nonlocal model - misorientation angle is explicitly set to zero when no neighbor can be found debug: - added flag "selectiveDebugger" that is used when debugging statements should only affect a specific element, ip and grain; these are specified with the new variables debug_e, debug_i and debug_g - debugger can now be used in its original sense
2010-02-17 18:51:36 +05:30
constitutive_state(debug_g,debug_i,debug_e)%p
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
!$OMP END CRITICAL (write2out)
endif
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
do k = 1,mesh_NcpElems
do j = 1,mesh_maxNips
if (homogenization_sizeState(j,k) > 0_pInt) &
homogenization_state0(j,k)%p = homogenization_state(j,k)%p ! internal state of homogenization scheme
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
enddo
enddo
endif
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
if (mode == 8 .or. mode == 9) then ! Abaqus explicit skips collect
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(:,:,IP,cp_en) = ffn
materialpoint_F(:,:,IP,cp_en) = ffn1
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! deformation gradient outdated or any actual deformation gradient differs more than relevantStrain from the stored one
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
if (terminallyIll .or. outdatedFFN1 .or. any(abs(ffn1 - materialpoint_F(:,:,IP,cp_en)) > relevantStrain)) then
if (.not. terminallyIll .and. .not. outdatedFFN1) then
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
if (debugger) then
!$OMP CRITICAL (write2out)
write(6,'(a11,x,i5,x,i2,x,a10,/,3(3(f10.6,x),/))') 'outdated at',cp_en,IP,'FFN1 now:',ffn1(:,1),ffn1(:,2),ffn1(:,3)
!$OMP END CRITICAL (write2out)
endif
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
outdatedFFN1 = .true.
endif
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
CPFEM_cs(:,IP,cp_en) = CPFEM_odd_stress
CPFEM_dcsde(:,:,IP,cp_en) = CPFEM_odd_jacobian*math_identity2nd(6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! deformation gradient is not outdated
else
! set flag for Jacobian update
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
updateJaco = mod(cycleCounter,iJacoStiffness) == 0
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! no parallel computation
if (.not. parallelExecution) then
! we just take one single element and IP
FEsolving_execElem(1) = cp_en
FEsolving_execElem(2) = cp_en
FEsolving_execIP(1,cp_en) = IP
FEsolving_execIP(2,cp_en) = IP
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent
call materialpoint_postResults(dt) ! post results
! parallel computation and calulation not yet done
elseif (.not. CPFEM_calc_done) then
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent (parallel execution inside)
call materialpoint_postResults(dt) ! post results
the latest RGC model + corrections for "element homogeneous" feature
2010-03-24 18:50:12 +05:30
do e = FEsolving_execElem(1),FEsolving_execElem(2) ! loop over all parallely processed elements
if (microstructure_elemhomo(mesh_element(4,e))) then ! dealing with homogeneous element?
forall (i = 2:FE_Nips(mesh_element(2,e))) ! copy results of first IP to all others
materialpoint_P(:,:,i,e) = materialpoint_P(:,:,1,e)
materialpoint_F(:,:,i,e) = materialpoint_F(:,:,1,e)
materialpoint_dPdF(:,:,:,:,i,e) = materialpoint_dPdF(:,:,:,:,1,e)
materialpoint_results(:,i,e) = materialpoint_results(:,1,e)
end forall
endif
enddo
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CPFEM_calc_done = .true.
endif
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
if (terminallyIll) then
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
CPFEM_cs(:,IP,cp_en) = CPFEM_odd_stress
CPFEM_dcsde(:,:,IP,cp_en) = CPFEM_odd_jacobian*math_identity2nd(6)
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
else
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! translate from P to CS
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
Kirchhoff = math_mul33x33(materialpoint_P(:,:,IP, cp_en),transpose(materialpoint_F(:,:,IP, cp_en)))
J_inverse = 1.0_pReal/math_det3x3(materialpoint_F(:,:,IP, cp_en))
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
CPFEM_cs(:,IP,cp_en) = math_Mandel33to6(J_inverse*Kirchhoff)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! translate from dP/dF to dCS/dE
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
H = 0.0_pReal
forall(i=1:3,j=1:3,k=1:3,l=1:3,m=1:3,n=1:3) &
H(i,j,k,l) = H(i,j,k,l) + &
materialpoint_F(j,m,IP,cp_en) * &
materialpoint_F(l,n,IP,cp_en) * &
materialpoint_dPdF(i,m,k,n,IP,cp_en) - &
math_I3(j,l)*materialpoint_F(i,m,IP,cp_en)*materialpoint_P(k,m,IP,cp_en) + &
0.5_pReal*(math_I3(i,k)*Kirchhoff(j,l) + math_I3(j,l)*Kirchhoff(i,k) + &
math_I3(i,l)*Kirchhoff(j,k) + math_I3(j,k)*Kirchhoff(i,l))
forall(i=1:3,j=1:3,k=1:3,l=1:3) &
H_sym(i,j,k,l)= 0.25_pReal*(H(i,j,k,l)+H(j,i,k,l)+H(i,j,l,k)+H(j,i,l,k)) ! where to use the symmetric version??
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
CPFEM_dcsde(:,:,IP,cp_en) = math_Mandel3333to66(J_inverse*H)
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
endif
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
! --+>> COLLECTION OF FEM INPUT WITH RETURNING OF ODD STRESS AND JACOBIAN <<+--
case (3,4,5)
if (mode == 4) then
CPFEM_dcsde_knownGood = CPFEM_dcsde ! --+>> BACKUP JACOBIAN FROM FORMER CONVERGED INC
else if (mode == 5) then
CPFEM_dcsde = CPFEM_dcsde_knownGood ! --+>> RESTORE CONSISTENT JACOBIAN FROM FORMER CONVERGED INC
end if
the latest RGC model + corrections for "element homogeneous" feature
2010-03-24 18:50:12 +05:30
call random_number(rnd)
if (rnd < 0.5_pReal) rnd = 1.0_pReal - rnd
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(:,:,IP,cp_en) = ffn
materialpoint_F(:,:,IP,cp_en) = ffn1
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
CPFEM_cs(:,IP,cp_en) = rnd*CPFEM_odd_stress
CPFEM_dcsde(:,:,IP,cp_en) = CPFEM_odd_jacobian*math_identity2nd(6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CPFEM_calc_done = .false.
! --+>> RECYCLING OF FORMER RESULTS (MARC SPECIALTY) <<+--
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! do nothing
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (7)
CPFEM_dcsde = CPFEM_dcsde_knownGood ! --+>> RESTORE CONSISTENT JACOBIAN FROM FORMER CONVERGED INC
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
end select
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! return the local stress and the jacobian from storage
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
cauchyStress(:) = CPFEM_cs(:,IP,cp_en)
jacobian(:,:) = CPFEM_dcsdE(:,:,IP,cp_en)
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
if (IP == 1 .and. cp_en == 1) then
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
if (debugger) then
!$OMP CRITICAL (write2out)
write(6,'(a,/,6(6(f10.3,x)/))') 'jacobian/GPa at ip 1 el 1',jacobian/1e9
call flush(6)
!$OMP END CRITICAL (write2out)
endif
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
endif
Major update: corrected treatment of temperature
2009-07-01 15:59:35 +05:30
! return temperature
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
if (theTime > 0.0_pReal) Temperature = materialpoint_Temperature(IP,cp_en) ! homogenized result except for potentially non-isothermal starting condition.
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
return
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
major restructuring of code. homogenization as well as constitutive are now free to choose. the runtime got somewhat longer (25% on simple tests) compared to a hardcoded isostrain homogenization. this might be a point of further optimization at a later stage... please use homogenization_isostrain.f90 as starting point / example for future developments of homog-schemes. the homogenization scheme now can additionally output certain results. hence, the userdata structure at each integration point now looks like this: - sizeHomogPostResults - block of that size containing homogPostResults then for each grain: - sizeGrainPostResults - block of that size containing crystallitePostResults, which consist of: + phaseID + volFrac + Eulers (3) + any constitutive post results requested
2009-05-07 21:57:36 +05:30
end subroutine
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
END MODULE CPFEM