Initial Commit

This commit is contained in:
Abhijit Kshirsagar Kshirsagar 2021-04-07 14:05:36 +05:30
parent e3ad08a3cf
commit 3d80aff565
5 changed files with 268 additions and 0 deletions

126
IITDH-ExamTemplate.tex Normal file
View File

@ -0,0 +1,126 @@
%\documentclass[addpoints]{exam}
\documentclass[addpoints, answers]{exam}
%& -job-name=XYZ
\usepackage[utf8]{inputenc}
\usepackage{amsmath}
\usepackage{cleveref}
\usepackage[siunitx, american]{circuitikz}
\usepackage{siunitx}
\usepackage{lastpage}
%\input{cedtcommands.tex}
\footer{}{\thepage/\pageref{LastPage}}{}
%\boxedpoints
\bracketedpoints
\pointsinrightmargin
%-------------------------------------------------------------
\begin{document}
%This code creates the text before the first question
%-------------------------------------------------------------------
\pagenumbering{arabic} \setcounter{page}{1}
\vspace{-10mm}
\begin{center}
\includegraphics[width=0.5\textwidth]{Logo-BW_-Wide.png}
\end{center}
\begin{center}\textbf{\LARGE{EE101 Spring 2021 Exam 1} }\end{center}
\begin{center}{Instructor: Dr. Abhijit Kshirsagar \\({username@domain.academic})}\end{center}
\small
\begin{center}
%Date and Time
March 16, 2020, 8am - 10am
\end{center}
\vspace{5mm}
\makebox[\textwidth]{\large Full Name (all caps):\hspace{2mm}\enspace\hrulefill}
\vspace{7mm}
\makebox[\textwidth]{\large Roll Number / ID (all caps):\enspace\hrulefill}
\vspace{5mm}
{
\large
\textbf{Instructions:}
\normalsize
\begin{enumerate}
\item Modify this text block to add all the instructions.
\item The front page is designed to have just the instructions - questions begin on the next page.
\item Put away all bags, books, notebooks, cellphones, laptops, tablets, smartwatches, etc.
\item Only ONE A4 or letter sized crib sheet for formulae or notes is allowed.
\item Scientific/programmable calculators are allowed.
\item Write your answers clearly and legibly in the space provided.
\item Points will be awarded for correct formulae, intermediate steps and working.
\item Use the provided paper for rough work if needed.
\item If any data are missing, make reasonable assumptions and state the same with justification.
\item This exam booklet has a total of {\numquestions}~questions on \pageref{LastPage} pages.
\item The exam consists of three sections worth 25 points, 25 points and 50 points respectively.
\item Points for each question are indicated in square brackets in the right margin.
\item For multiple choice questions, select the \textbf{best option} or \textbf{all correct answers}, as appropriate,
and write your response in the space below each question, e.g. \textbf{A} or \textbf{A,B,D}
\item For fill-in-the-blank questions write the answer in the corresponding blank space.
\end{enumerate}
}
\normalsize
\clearpage
%-------------------------------------------------------------------
%Here, the questions begin
\begin{questions}
\fullwidth{\Large \textbf{Section 1: \pointsinrange{grsec1} Points}}
\begingradingrange{grsec1}
\input{section1}
\endgradingrange{grsec1}
%\clearpage
\fullwidth{\Large \textbf{Section 2: \pointsinrange{grsec2} Points}}
\begingradingrange{grsec2}
\input{section2}
\endgradingrange{grsec2}
\clearpage
\fullwidth{\Large \textbf{Section 3: \pointsinrange{grsec3} Points}}
\begingradingrange{grsec3}
\input{section3}
\endgradingrange{grsec3}
\end{questions}
\clearpage
\begin{center}
\Large{\textbf{Do not write on this page.}}\\
\vspace{10mm}
\hrule
\vspace{0.25in}
\underline{Section 1}\\
\vspace{5mm}
\setlength{\doublerulesep}{0.25in}
\multirowpartialgradetable{2}{grsec1}[questions]
\vspace{0.25in}
%\hrule
\vspace{0.25in}
\underline{Section 2}\\
\vspace{5mm}
\multirowpartialgradetable{1}{grsec2}[questions]
\vspace{0.25in}
%\hrule
\vspace{0.25in}
\underline{Section 3}\\
\vspace{5mm}
\multirowpartialgradetable{1}{grsec3}[questions]
\end{center}
\cfoot{{\thepage/\pageref{LastPage}} \\ This exam was created with the `exam' class of \LaTeX}
\end{document}

BIN
Logo-BW_-Wide.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 37 KiB

45
section1.tex Normal file
View File

@ -0,0 +1,45 @@
%\fullwidth{
%Instructions:
%
%For multiple choice questions select the \textbf{best option} or \textbf{all correct answers}, as appropriate.
%and write your response in the space below each question, e.g. \textbf{A} or \textbf{A,B,D}
%\\For fill-in-the blank questions write the answer in the space provided.
%}
%
%\vspace{5mm}
%}
%Concept:
\question[1]This a multiple-choice question with a single answer. Which among the following is the largest integer?
\begin{choices}
\choice 1
\choice 2
\choice 3
\CorrectChoice 4
\end{choices}
\answerline
% \vspace{1mm}
\question[1]This is a True / False Question. Is two greater than one?:
\begin{choices}
\CorrectChoice True
\choice False
\end{choices}
\answerline
%\vspace{5mm}
\question[1] Multiple-choice questions can have more than one correct option also. Identify all the positive number from the following:
\begin{choices}
\CorrectChoice 1
\choice -1
\CorrectChoice 2
\choice -2
\end{choices}
\answerline
\vspace{5mm}
\question[1] This is a fill-the-blanks question. Complete the following series:
One, three, \fillin[five][1in], seven, \fillin[nine][1in], eleven.
%\begin{solutionbox}[2in]
%Acceptable answers: Transmission, Distribution, Protection or any other reasonable answer.
%\end{solutionbox}
\vspace{5mm}

8
section2.tex Normal file
View File

@ -0,0 +1,8 @@
\question[1]These are some examples of numerical problems. A 1\si{\kilo\watt} load runs continuously for one day. Find the total energy drawn in \si{\kilo\joule}.
\begin{solutionorbox}[2in]
Total Energy = Power x time\\
$=1\si{\kilo\watt}\times24\si{\hour}$\\
$=1000\si{\watt}\times24\times60\times60\si{\sec}$\\
$=86400\si{\kilo\joule}$
\end{solutionorbox}

89
section3.tex Normal file
View File

@ -0,0 +1,89 @@
\question[10] These are some ``long form" questions. A PV Panel is found to have a maximum power point of 34.1V and 9.83A when tested at STC (1kW/m\textsuperscript{2}), and has a stated efficiency of 19.6\%.
Estimate the active area of this panel (i.e. the area of semiconductor that light falls on) in \si{\meter\squared}.
\begin{solutionorbox}[7.75in]
At Standard test conditions, the incident radiant energy is 1kW/m\textsuperscript{2}.
Assume that the area of the panel is $A$. The radiant power falling on this panel, i.e. incident power, is therefore:
\begin{equation*}
P_\text{incident}= 1\text{kW}/m^2 * A
\end{equation*}
The output power is just the incident power times the efficiency:
\begin{equation*}
P_\text{output}= 1\text{kW}/m^2 * A * \eta
\end{equation*}
Where efficiency $\eta=(19.6/100)$.
The maximum output power can be determined from the maximum power point details:
Pout
\begin{equation*}
P_\text{out}= V_{oc}*I_{sc}.
\end{equation*}
Thus, equating the two values of P\textsubscript{out}, we can calculate $A$:
\begin{equation*}
A= (V_{oc}*I_{sc})/(\eta * 1kW/m^2) = 1.71 m^2 = 18\text{\ square feet}.
\end{equation*}
\end{solutionorbox}
\clearpage
\question[10] This is a question that requres a graph / plot as the response. The graph can be generated in \TeX. A PV Panel has a maximum power point of 34.1V and 9.83A when tested at STC (standard testing conditions) and a fill factor of 83.8\%. The open circuit voltage is found to be 40\si{\volt}. Compute the short circuit current for this panel and then sketch the VI curve, and label the maximum power point.
\fillwithgrid{8in}
\clearpage
\question This is an example of a complex, multi-part question with multiple types of sub-parts. A user wants to connect an inductive load (Z) with a rating of 10kW and a power factor of 0.5 to the utility supply, as shown in the figure below. The supply voltage is $v_g(t) = 170\sin({\omega t + 0^\circ})$ , with a frequency of 60Hz.
\begin{figure}[h]
\centering
\begin{circuitikz}[scale=0.7]
\draw
(0,0) to[sinusoidal voltage source, , v_<=$v_g(t)$] (0,4)
to[short,i=${i_g(t)}$] (5,4)
%(5,0) to[I, color=blue, *-*, l=$i_c(t)$] (5,4)
(5,4) -- (7,4)
to[european resistor, l=$Z$] (7,0) -- (0,0);
\end{circuitikz}
%\caption*{Problem 1}
\label{fig:prob1}
\end{figure}
\begin{parts}
\part[5] Calculate values of P, Q and S (with the appropriate units):
\begin{solutionorbox}[4in]
Given that P is 10kW and $cos\theta=0.5$ therefore current lags voltage by $60^\circ$.
Magnitude of apparent power is therefore P/$\cos60^\circ$=20kVA.
Therefore $Q=S\sin\theta=17.32\text{kVAR}$.
Since the load is inductive, Q has a positive value.
\end{solutionorbox}
\vspace{5mm}
P = \fillin[10kW][2in]
\vspace{2mm}
Q = \fillin[17.32kVAr][2in]
\vspace{2mm}
S = \fillin[20kVA][2in]
\part[5]Draw the power triangle for this load. You can change the spacing of the grid too:
\vspace{5mm}
\setlength{\gridsize}{\dimexpr.025\linewidth-41\gridlinewidth}
\fillwithgrid{3in}
\clearpage
\part[5] Calculate the net impedance now.
\begin{solutionorbox}[3.5in]
The net impedance is the parallel combination of the capacitor's impedance and the existing load.
We found that $Z=0.181 +0.313j$. The impedance of the newly added capacitor is:
\[X_C = \cfrac{1}{j\omega C} = -0.4171j \Omega \]
Therefore net impedance is:
\[ X_C || Z = \cfrac{ZX_C}{Z+X_C} = 0.7222 - 0.0027j\Omega \approx 0.7222\Omega \]
\end{solutionorbox}
\part[5] What is the power factor seen by the grid after the capacitor is installed?
\begin{solutionorbox}[2in]
The power factor is now nearly unity.
Phase angle is about 0.2 degrees which for all practical purposes is almost zero.
\end{solutionorbox}
\end{parts}