From c8a891b513c0468660f39a41f5d18a53a0d65395 Mon Sep 17 00:00:00 2001 From: Abhijit Kshirsagar Date: Fri, 1 Sep 2023 17:32:58 +0530 Subject: [PATCH] Add base code --- Blink/main.c | 61 + Blink/tm4c123gh6pm.cmd | 45 + Blink/tm4c123gh6pm.h | 12867 +++++++++++++++++++++++++++++ Blink/tm4c123gh6pm_startup_ccs.c | 300 + 4 files changed, 13273 insertions(+) create mode 100644 Blink/main.c create mode 100644 Blink/tm4c123gh6pm.cmd create mode 100644 Blink/tm4c123gh6pm.h create mode 100644 Blink/tm4c123gh6pm_startup_ccs.c diff --git a/Blink/main.c b/Blink/main.c new file mode 100644 index 0000000..7f76bdb --- /dev/null +++ b/Blink/main.c @@ -0,0 +1,61 @@ +#include +#include "tm4c123gh6pm.h" + +#define ZERO_DEF 0 + +/** + * main.c + */ + +void counter_loop (void); + +int main(void) + +/* + * GPIODATA ->> 0xE + * GPIODIR ->> COnfigure each pin as I/P or O/P >> <0000 1110> = 0xE + * GPIOPCTL + GPIOSLR -- Slew Rate Control +x GPIOPUR -- Pull Up Enable -- 0x11 +x GPIOPDR -- Pull Down Enable +x GPIOODR -- OpenDrain +x GPIODEN -- GPIO Digital Enable -- 0x00011111 >> 0x1F + */ + + + +{ + + register uint32_t x = ZERO_DEF; + + SYSCTL_RCGC2_R |= SYSCTL_RCGC2_GPIOF; + GPIO_PORTF_DEN_R = 0x1F; + GPIO_PORTF_PUR_R = 0x11; + GPIO_PORTF_DIR_R = 0x0E; + GPIO_PORTF_DATA_R = 0xE; + while(1) + { + GPIO_PORTF_DATA_R = 0x0; + GPIO_PORTF_DATA_R = 0x2; + GPIO_PORTF_DATA_R = 0x4; + GPIO_PORTF_DATA_R = 0x8; + GPIO_PORTF_DATA_R = 0xE; + } + + + + while (1) + { + x++; + counter_loop(); + } +} + + +void counter_loop (void) +{ + register uint32_t count=10; + while(count>0) + count--; + +} diff --git a/Blink/tm4c123gh6pm.cmd b/Blink/tm4c123gh6pm.cmd new file mode 100644 index 0000000..8f6aca9 --- /dev/null +++ b/Blink/tm4c123gh6pm.cmd @@ -0,0 +1,45 @@ +/****************************************************************************** + * + * Default Linker Command file for the Texas Instruments TM4C123GH6PM + * + * This is derived from revision 15071 of the TivaWare Library. + * + *****************************************************************************/ + +--retain=g_pfnVectors + +MEMORY +{ + FLASH (RX) : origin = 0x00000000, length = 0x00040000 + SRAM (RWX) : origin = 0x20000000, length = 0x00008000 +} + +/* The following command line options are set as part of the CCS project. */ +/* If you are building using the command line, or for some reason want to */ +/* define them here, you can uncomment and modify these lines as needed. */ +/* If you are using CCS for building, it is probably better to make any such */ +/* modifications in your CCS project and leave this file alone. */ +/* */ +/* --heap_size=0 */ +/* --stack_size=256 */ +/* --library=rtsv7M4_T_le_eabi.lib */ + +/* Section allocation in memory */ + +SECTIONS +{ + .intvecs: > 0x00000000 + .text : > FLASH + .const : > FLASH + .cinit : > FLASH + .pinit : > FLASH + .init_array : > FLASH + + .vtable : > 0x20000000 + .data : > SRAM + .bss : > SRAM + .sysmem : > SRAM + .stack : > SRAM +} + +__STACK_TOP = __stack + 512; diff --git a/Blink/tm4c123gh6pm.h b/Blink/tm4c123gh6pm.h new file mode 100644 index 0000000..fe4b536 --- /dev/null +++ b/Blink/tm4c123gh6pm.h @@ -0,0 +1,12867 @@ +//***************************************************************************** +// +// tm4c123gh6pm.h - TM4C123GH6PM Register Definitions +// +// Copyright (c) 2013-2017 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __TM4C123GH6PM_H__ +#define __TM4C123GH6PM_H__ + +//***************************************************************************** +// +// Interrupt assignments +// +//***************************************************************************** +#define INT_GPIOA 16 // GPIO Port A +#define INT_GPIOB 17 // GPIO Port B +#define INT_GPIOC 18 // GPIO Port C +#define INT_GPIOD 19 // GPIO Port D +#define INT_GPIOE 20 // GPIO Port E +#define INT_UART0 21 // UART0 +#define INT_UART1 22 // UART1 +#define INT_SSI0 23 // SSI0 +#define INT_I2C0 24 // I2C0 +#define INT_PWM0_FAULT 25 // PWM0 Fault +#define INT_PWM0_0 26 // PWM0 Generator 0 +#define INT_PWM0_1 27 // PWM0 Generator 1 +#define INT_PWM0_2 28 // PWM0 Generator 2 +#define INT_QEI0 29 // QEI0 +#define INT_ADC0SS0 30 // ADC0 Sequence 0 +#define INT_ADC0SS1 31 // ADC0 Sequence 1 +#define INT_ADC0SS2 32 // ADC0 Sequence 2 +#define INT_ADC0SS3 33 // ADC0 Sequence 3 +#define INT_WATCHDOG 34 // Watchdog Timers 0 and 1 +#define INT_TIMER0A 35 // 16/32-Bit Timer 0A +#define INT_TIMER0B 36 // 16/32-Bit Timer 0B +#define INT_TIMER1A 37 // 16/32-Bit Timer 1A +#define INT_TIMER1B 38 // 16/32-Bit Timer 1B +#define INT_TIMER2A 39 // 16/32-Bit Timer 2A +#define INT_TIMER2B 40 // 16/32-Bit Timer 2B +#define INT_COMP0 41 // Analog Comparator 0 +#define INT_COMP1 42 // Analog Comparator 1 +#define INT_SYSCTL 44 // System Control +#define INT_FLASH 45 // Flash Memory Control and EEPROM + // Control +#define INT_GPIOF 46 // GPIO Port F +#define INT_UART2 49 // UART2 +#define INT_SSI1 50 // SSI1 +#define INT_TIMER3A 51 // 16/32-Bit Timer 3A +#define INT_TIMER3B 52 // Timer 3B +#define INT_I2C1 53 // I2C1 +#define INT_QEI1 54 // QEI1 +#define INT_CAN0 55 // CAN0 +#define INT_CAN1 56 // CAN1 +#define INT_HIBERNATE 59 // Hibernation Module +#define INT_USB0 60 // USB +#define INT_PWM0_3 61 // PWM Generator 3 +#define INT_UDMA 62 // uDMA Software +#define INT_UDMAERR 63 // uDMA Error +#define INT_ADC1SS0 64 // ADC1 Sequence 0 +#define INT_ADC1SS1 65 // ADC1 Sequence 1 +#define INT_ADC1SS2 66 // ADC1 Sequence 2 +#define INT_ADC1SS3 67 // ADC1 Sequence 3 +#define INT_SSI2 73 // SSI2 +#define INT_SSI3 74 // SSI3 +#define INT_UART3 75 // UART3 +#define INT_UART4 76 // UART4 +#define INT_UART5 77 // UART5 +#define INT_UART6 78 // UART6 +#define INT_UART7 79 // UART7 +#define INT_I2C2 84 // I2C2 +#define INT_I2C3 85 // I2C3 +#define INT_TIMER4A 86 // 16/32-Bit Timer 4A +#define INT_TIMER4B 87 // 16/32-Bit Timer 4B +#define INT_TIMER5A 108 // 16/32-Bit Timer 5A +#define INT_TIMER5B 109 // 16/32-Bit Timer 5B +#define INT_WTIMER0A 110 // 32/64-Bit Timer 0A +#define INT_WTIMER0B 111 // 32/64-Bit Timer 0B +#define INT_WTIMER1A 112 // 32/64-Bit Timer 1A +#define INT_WTIMER1B 113 // 32/64-Bit Timer 1B +#define INT_WTIMER2A 114 // 32/64-Bit Timer 2A +#define INT_WTIMER2B 115 // 32/64-Bit Timer 2B +#define INT_WTIMER3A 116 // 32/64-Bit Timer 3A +#define INT_WTIMER3B 117 // 32/64-Bit Timer 3B +#define INT_WTIMER4A 118 // 32/64-Bit Timer 4A +#define INT_WTIMER4B 119 // 32/64-Bit Timer 4B +#define INT_WTIMER5A 120 // 32/64-Bit Timer 5A +#define INT_WTIMER5B 121 // 32/64-Bit Timer 5B +#define INT_SYSEXC 122 // System Exception (imprecise) +#define INT_PWM1_0 150 // PWM1 Generator 0 +#define INT_PWM1_1 151 // PWM1 Generator 1 +#define INT_PWM1_2 152 // PWM1 Generator 2 +#define INT_PWM1_3 153 // PWM1 Generator 3 +#define INT_PWM1_FAULT 154 // PWM1 Fault + +//***************************************************************************** +// +// Watchdog Timer registers (WATCHDOG0) +// +//***************************************************************************** +#define WATCHDOG0_LOAD_R (*((volatile uint32_t *)0x40000000)) +#define WATCHDOG0_VALUE_R (*((volatile uint32_t *)0x40000004)) +#define WATCHDOG0_CTL_R (*((volatile uint32_t *)0x40000008)) +#define WATCHDOG0_ICR_R (*((volatile uint32_t *)0x4000000C)) +#define WATCHDOG0_RIS_R (*((volatile uint32_t *)0x40000010)) +#define WATCHDOG0_MIS_R (*((volatile uint32_t *)0x40000014)) +#define WATCHDOG0_TEST_R (*((volatile uint32_t *)0x40000418)) +#define WATCHDOG0_LOCK_R (*((volatile uint32_t *)0x40000C00)) + +//***************************************************************************** +// +// Watchdog Timer registers (WATCHDOG1) +// +//***************************************************************************** +#define WATCHDOG1_LOAD_R (*((volatile uint32_t *)0x40001000)) +#define WATCHDOG1_VALUE_R (*((volatile uint32_t *)0x40001004)) +#define WATCHDOG1_CTL_R (*((volatile uint32_t *)0x40001008)) +#define WATCHDOG1_ICR_R (*((volatile uint32_t *)0x4000100C)) +#define WATCHDOG1_RIS_R (*((volatile uint32_t *)0x40001010)) +#define WATCHDOG1_MIS_R (*((volatile uint32_t *)0x40001014)) +#define WATCHDOG1_TEST_R (*((volatile uint32_t *)0x40001418)) +#define WATCHDOG1_LOCK_R (*((volatile uint32_t *)0x40001C00)) + +//***************************************************************************** +// +// GPIO registers (PORTA) +// +//***************************************************************************** +#define GPIO_PORTA_DATA_BITS_R ((volatile uint32_t *)0x40004000) +#define GPIO_PORTA_DATA_R (*((volatile uint32_t *)0x400043FC)) +#define GPIO_PORTA_DIR_R (*((volatile uint32_t *)0x40004400)) +#define GPIO_PORTA_IS_R (*((volatile uint32_t *)0x40004404)) +#define GPIO_PORTA_IBE_R (*((volatile uint32_t *)0x40004408)) +#define GPIO_PORTA_IEV_R (*((volatile uint32_t *)0x4000440C)) +#define GPIO_PORTA_IM_R (*((volatile uint32_t *)0x40004410)) +#define GPIO_PORTA_RIS_R (*((volatile uint32_t *)0x40004414)) +#define GPIO_PORTA_MIS_R (*((volatile uint32_t *)0x40004418)) +#define GPIO_PORTA_ICR_R (*((volatile uint32_t *)0x4000441C)) +#define GPIO_PORTA_AFSEL_R (*((volatile uint32_t *)0x40004420)) +#define GPIO_PORTA_DR2R_R (*((volatile uint32_t *)0x40004500)) +#define GPIO_PORTA_DR4R_R (*((volatile uint32_t *)0x40004504)) +#define GPIO_PORTA_DR8R_R (*((volatile uint32_t *)0x40004508)) +#define GPIO_PORTA_ODR_R (*((volatile uint32_t *)0x4000450C)) +#define GPIO_PORTA_PUR_R (*((volatile uint32_t *)0x40004510)) +#define GPIO_PORTA_PDR_R (*((volatile uint32_t *)0x40004514)) +#define GPIO_PORTA_SLR_R (*((volatile uint32_t *)0x40004518)) +#define GPIO_PORTA_DEN_R (*((volatile uint32_t *)0x4000451C)) +#define GPIO_PORTA_LOCK_R (*((volatile uint32_t *)0x40004520)) +#define GPIO_PORTA_CR_R (*((volatile uint32_t *)0x40004524)) +#define GPIO_PORTA_AMSEL_R (*((volatile uint32_t *)0x40004528)) +#define GPIO_PORTA_PCTL_R (*((volatile uint32_t *)0x4000452C)) +#define GPIO_PORTA_ADCCTL_R (*((volatile uint32_t *)0x40004530)) +#define GPIO_PORTA_DMACTL_R (*((volatile uint32_t *)0x40004534)) + +//***************************************************************************** +// +// GPIO registers (PORTB) +// +//***************************************************************************** +#define GPIO_PORTB_DATA_BITS_R ((volatile uint32_t *)0x40005000) +#define GPIO_PORTB_DATA_R (*((volatile uint32_t *)0x400053FC)) +#define GPIO_PORTB_DIR_R (*((volatile uint32_t *)0x40005400)) +#define GPIO_PORTB_IS_R (*((volatile uint32_t *)0x40005404)) +#define GPIO_PORTB_IBE_R (*((volatile uint32_t *)0x40005408)) +#define GPIO_PORTB_IEV_R (*((volatile uint32_t *)0x4000540C)) +#define GPIO_PORTB_IM_R (*((volatile uint32_t *)0x40005410)) +#define GPIO_PORTB_RIS_R (*((volatile uint32_t *)0x40005414)) +#define GPIO_PORTB_MIS_R (*((volatile uint32_t *)0x40005418)) +#define GPIO_PORTB_ICR_R (*((volatile uint32_t *)0x4000541C)) +#define GPIO_PORTB_AFSEL_R (*((volatile uint32_t *)0x40005420)) +#define GPIO_PORTB_DR2R_R (*((volatile uint32_t *)0x40005500)) +#define GPIO_PORTB_DR4R_R (*((volatile uint32_t *)0x40005504)) +#define GPIO_PORTB_DR8R_R (*((volatile uint32_t *)0x40005508)) +#define GPIO_PORTB_ODR_R (*((volatile uint32_t *)0x4000550C)) +#define GPIO_PORTB_PUR_R (*((volatile uint32_t *)0x40005510)) +#define GPIO_PORTB_PDR_R (*((volatile uint32_t *)0x40005514)) +#define GPIO_PORTB_SLR_R (*((volatile uint32_t *)0x40005518)) +#define GPIO_PORTB_DEN_R (*((volatile uint32_t *)0x4000551C)) +#define GPIO_PORTB_LOCK_R (*((volatile uint32_t *)0x40005520)) +#define GPIO_PORTB_CR_R (*((volatile uint32_t *)0x40005524)) +#define GPIO_PORTB_AMSEL_R (*((volatile uint32_t *)0x40005528)) +#define GPIO_PORTB_PCTL_R (*((volatile uint32_t *)0x4000552C)) +#define GPIO_PORTB_ADCCTL_R (*((volatile uint32_t *)0x40005530)) +#define GPIO_PORTB_DMACTL_R (*((volatile uint32_t *)0x40005534)) + +//***************************************************************************** +// +// GPIO registers (PORTC) +// +//***************************************************************************** +#define GPIO_PORTC_DATA_BITS_R ((volatile uint32_t *)0x40006000) +#define GPIO_PORTC_DATA_R (*((volatile uint32_t *)0x400063FC)) +#define GPIO_PORTC_DIR_R (*((volatile uint32_t *)0x40006400)) +#define GPIO_PORTC_IS_R (*((volatile uint32_t *)0x40006404)) +#define GPIO_PORTC_IBE_R (*((volatile uint32_t *)0x40006408)) +#define GPIO_PORTC_IEV_R (*((volatile uint32_t *)0x4000640C)) +#define GPIO_PORTC_IM_R (*((volatile uint32_t *)0x40006410)) +#define GPIO_PORTC_RIS_R (*((volatile uint32_t *)0x40006414)) +#define GPIO_PORTC_MIS_R (*((volatile uint32_t *)0x40006418)) +#define GPIO_PORTC_ICR_R (*((volatile uint32_t *)0x4000641C)) +#define GPIO_PORTC_AFSEL_R (*((volatile uint32_t *)0x40006420)) +#define GPIO_PORTC_DR2R_R (*((volatile uint32_t *)0x40006500)) +#define GPIO_PORTC_DR4R_R (*((volatile uint32_t *)0x40006504)) +#define GPIO_PORTC_DR8R_R (*((volatile uint32_t *)0x40006508)) +#define GPIO_PORTC_ODR_R (*((volatile uint32_t *)0x4000650C)) +#define GPIO_PORTC_PUR_R (*((volatile uint32_t *)0x40006510)) +#define GPIO_PORTC_PDR_R (*((volatile uint32_t *)0x40006514)) +#define GPIO_PORTC_SLR_R (*((volatile uint32_t *)0x40006518)) +#define GPIO_PORTC_DEN_R (*((volatile uint32_t *)0x4000651C)) +#define GPIO_PORTC_LOCK_R (*((volatile uint32_t *)0x40006520)) +#define GPIO_PORTC_CR_R (*((volatile uint32_t *)0x40006524)) +#define GPIO_PORTC_AMSEL_R (*((volatile uint32_t *)0x40006528)) +#define GPIO_PORTC_PCTL_R (*((volatile uint32_t *)0x4000652C)) +#define GPIO_PORTC_ADCCTL_R (*((volatile uint32_t *)0x40006530)) +#define GPIO_PORTC_DMACTL_R (*((volatile uint32_t *)0x40006534)) + +//***************************************************************************** +// +// GPIO registers (PORTD) +// +//***************************************************************************** +#define GPIO_PORTD_DATA_BITS_R ((volatile uint32_t *)0x40007000) +#define GPIO_PORTD_DATA_R (*((volatile uint32_t *)0x400073FC)) +#define GPIO_PORTD_DIR_R (*((volatile uint32_t *)0x40007400)) +#define GPIO_PORTD_IS_R (*((volatile uint32_t *)0x40007404)) +#define GPIO_PORTD_IBE_R (*((volatile uint32_t *)0x40007408)) +#define GPIO_PORTD_IEV_R (*((volatile uint32_t *)0x4000740C)) +#define GPIO_PORTD_IM_R (*((volatile uint32_t *)0x40007410)) +#define GPIO_PORTD_RIS_R (*((volatile uint32_t *)0x40007414)) +#define GPIO_PORTD_MIS_R (*((volatile uint32_t *)0x40007418)) +#define GPIO_PORTD_ICR_R (*((volatile uint32_t *)0x4000741C)) +#define GPIO_PORTD_AFSEL_R (*((volatile uint32_t *)0x40007420)) +#define GPIO_PORTD_DR2R_R (*((volatile uint32_t *)0x40007500)) +#define GPIO_PORTD_DR4R_R (*((volatile uint32_t *)0x40007504)) +#define GPIO_PORTD_DR8R_R (*((volatile uint32_t *)0x40007508)) +#define GPIO_PORTD_ODR_R (*((volatile uint32_t *)0x4000750C)) +#define GPIO_PORTD_PUR_R (*((volatile uint32_t *)0x40007510)) +#define GPIO_PORTD_PDR_R (*((volatile uint32_t *)0x40007514)) +#define GPIO_PORTD_SLR_R (*((volatile uint32_t *)0x40007518)) +#define GPIO_PORTD_DEN_R (*((volatile uint32_t *)0x4000751C)) +#define GPIO_PORTD_LOCK_R (*((volatile uint32_t *)0x40007520)) +#define GPIO_PORTD_CR_R (*((volatile uint32_t *)0x40007524)) +#define GPIO_PORTD_AMSEL_R (*((volatile uint32_t *)0x40007528)) +#define GPIO_PORTD_PCTL_R (*((volatile uint32_t *)0x4000752C)) +#define GPIO_PORTD_ADCCTL_R (*((volatile uint32_t *)0x40007530)) +#define GPIO_PORTD_DMACTL_R (*((volatile uint32_t *)0x40007534)) + +//***************************************************************************** +// +// SSI registers (SSI0) +// +//***************************************************************************** +#define SSI0_CR0_R (*((volatile uint32_t *)0x40008000)) +#define SSI0_CR1_R (*((volatile uint32_t *)0x40008004)) +#define SSI0_DR_R (*((volatile uint32_t *)0x40008008)) +#define SSI0_SR_R (*((volatile uint32_t *)0x4000800C)) +#define SSI0_CPSR_R (*((volatile uint32_t *)0x40008010)) +#define SSI0_IM_R (*((volatile uint32_t *)0x40008014)) +#define SSI0_RIS_R (*((volatile uint32_t *)0x40008018)) +#define SSI0_MIS_R (*((volatile uint32_t *)0x4000801C)) +#define SSI0_ICR_R (*((volatile uint32_t *)0x40008020)) +#define SSI0_DMACTL_R (*((volatile uint32_t *)0x40008024)) +#define SSI0_CC_R (*((volatile uint32_t *)0x40008FC8)) + +//***************************************************************************** +// +// SSI registers (SSI1) +// +//***************************************************************************** +#define SSI1_CR0_R (*((volatile uint32_t *)0x40009000)) +#define SSI1_CR1_R (*((volatile uint32_t *)0x40009004)) +#define SSI1_DR_R (*((volatile uint32_t *)0x40009008)) +#define SSI1_SR_R (*((volatile uint32_t *)0x4000900C)) +#define SSI1_CPSR_R (*((volatile uint32_t *)0x40009010)) +#define SSI1_IM_R (*((volatile uint32_t *)0x40009014)) +#define SSI1_RIS_R (*((volatile uint32_t *)0x40009018)) +#define SSI1_MIS_R (*((volatile uint32_t *)0x4000901C)) +#define SSI1_ICR_R (*((volatile uint32_t *)0x40009020)) +#define SSI1_DMACTL_R (*((volatile uint32_t *)0x40009024)) +#define SSI1_CC_R (*((volatile uint32_t *)0x40009FC8)) + +//***************************************************************************** +// +// SSI registers (SSI2) +// +//***************************************************************************** +#define SSI2_CR0_R (*((volatile uint32_t *)0x4000A000)) +#define SSI2_CR1_R (*((volatile uint32_t *)0x4000A004)) +#define SSI2_DR_R (*((volatile uint32_t *)0x4000A008)) +#define SSI2_SR_R (*((volatile uint32_t *)0x4000A00C)) +#define SSI2_CPSR_R (*((volatile uint32_t *)0x4000A010)) +#define SSI2_IM_R (*((volatile uint32_t *)0x4000A014)) +#define SSI2_RIS_R (*((volatile uint32_t *)0x4000A018)) +#define SSI2_MIS_R (*((volatile uint32_t *)0x4000A01C)) +#define SSI2_ICR_R (*((volatile uint32_t *)0x4000A020)) +#define SSI2_DMACTL_R (*((volatile uint32_t *)0x4000A024)) +#define SSI2_CC_R (*((volatile uint32_t *)0x4000AFC8)) + +//***************************************************************************** +// +// SSI registers (SSI3) +// +//***************************************************************************** +#define SSI3_CR0_R (*((volatile uint32_t *)0x4000B000)) +#define SSI3_CR1_R (*((volatile uint32_t *)0x4000B004)) +#define SSI3_DR_R (*((volatile uint32_t *)0x4000B008)) +#define SSI3_SR_R (*((volatile uint32_t *)0x4000B00C)) +#define SSI3_CPSR_R (*((volatile uint32_t *)0x4000B010)) +#define SSI3_IM_R (*((volatile uint32_t *)0x4000B014)) +#define SSI3_RIS_R (*((volatile uint32_t *)0x4000B018)) +#define SSI3_MIS_R (*((volatile uint32_t *)0x4000B01C)) +#define SSI3_ICR_R (*((volatile uint32_t *)0x4000B020)) +#define SSI3_DMACTL_R (*((volatile uint32_t *)0x4000B024)) +#define SSI3_CC_R (*((volatile uint32_t *)0x4000BFC8)) + +//***************************************************************************** +// +// UART registers (UART0) +// +//***************************************************************************** +#define UART0_DR_R (*((volatile uint32_t *)0x4000C000)) +#define UART0_RSR_R (*((volatile uint32_t *)0x4000C004)) +#define UART0_ECR_R (*((volatile uint32_t *)0x4000C004)) +#define UART0_FR_R (*((volatile uint32_t *)0x4000C018)) +#define UART0_ILPR_R (*((volatile uint32_t *)0x4000C020)) +#define UART0_IBRD_R (*((volatile uint32_t *)0x4000C024)) +#define UART0_FBRD_R (*((volatile uint32_t *)0x4000C028)) +#define UART0_LCRH_R (*((volatile uint32_t *)0x4000C02C)) +#define UART0_CTL_R (*((volatile uint32_t *)0x4000C030)) +#define UART0_IFLS_R (*((volatile uint32_t *)0x4000C034)) +#define UART0_IM_R (*((volatile uint32_t *)0x4000C038)) +#define UART0_RIS_R (*((volatile uint32_t *)0x4000C03C)) +#define UART0_MIS_R (*((volatile uint32_t *)0x4000C040)) +#define UART0_ICR_R (*((volatile uint32_t *)0x4000C044)) +#define UART0_DMACTL_R (*((volatile uint32_t *)0x4000C048)) +#define UART0_9BITADDR_R (*((volatile uint32_t *)0x4000C0A4)) +#define UART0_9BITAMASK_R (*((volatile uint32_t *)0x4000C0A8)) +#define UART0_PP_R (*((volatile uint32_t *)0x4000CFC0)) +#define UART0_CC_R (*((volatile uint32_t *)0x4000CFC8)) + +//***************************************************************************** +// +// UART registers (UART1) +// +//***************************************************************************** +#define UART1_DR_R (*((volatile uint32_t *)0x4000D000)) +#define UART1_RSR_R (*((volatile uint32_t *)0x4000D004)) +#define UART1_ECR_R (*((volatile uint32_t *)0x4000D004)) +#define UART1_FR_R (*((volatile uint32_t *)0x4000D018)) +#define UART1_ILPR_R (*((volatile uint32_t *)0x4000D020)) +#define UART1_IBRD_R (*((volatile uint32_t *)0x4000D024)) +#define UART1_FBRD_R (*((volatile uint32_t *)0x4000D028)) +#define UART1_LCRH_R (*((volatile uint32_t *)0x4000D02C)) +#define UART1_CTL_R (*((volatile uint32_t *)0x4000D030)) +#define UART1_IFLS_R (*((volatile uint32_t *)0x4000D034)) +#define UART1_IM_R (*((volatile uint32_t *)0x4000D038)) +#define UART1_RIS_R (*((volatile uint32_t *)0x4000D03C)) +#define UART1_MIS_R (*((volatile uint32_t *)0x4000D040)) +#define UART1_ICR_R (*((volatile uint32_t *)0x4000D044)) +#define UART1_DMACTL_R (*((volatile uint32_t *)0x4000D048)) +#define UART1_9BITADDR_R (*((volatile uint32_t *)0x4000D0A4)) +#define UART1_9BITAMASK_R (*((volatile uint32_t *)0x4000D0A8)) +#define UART1_PP_R (*((volatile uint32_t *)0x4000DFC0)) +#define UART1_CC_R (*((volatile uint32_t *)0x4000DFC8)) + +//***************************************************************************** +// +// UART registers (UART2) +// +//***************************************************************************** +#define UART2_DR_R (*((volatile uint32_t *)0x4000E000)) +#define UART2_RSR_R (*((volatile uint32_t *)0x4000E004)) +#define UART2_ECR_R (*((volatile uint32_t *)0x4000E004)) +#define UART2_FR_R (*((volatile uint32_t *)0x4000E018)) +#define UART2_ILPR_R (*((volatile uint32_t *)0x4000E020)) +#define UART2_IBRD_R (*((volatile uint32_t *)0x4000E024)) +#define UART2_FBRD_R (*((volatile uint32_t *)0x4000E028)) +#define UART2_LCRH_R (*((volatile uint32_t *)0x4000E02C)) +#define UART2_CTL_R (*((volatile uint32_t *)0x4000E030)) +#define UART2_IFLS_R (*((volatile uint32_t *)0x4000E034)) +#define UART2_IM_R (*((volatile uint32_t *)0x4000E038)) +#define UART2_RIS_R (*((volatile uint32_t *)0x4000E03C)) +#define UART2_MIS_R (*((volatile uint32_t *)0x4000E040)) +#define UART2_ICR_R (*((volatile uint32_t *)0x4000E044)) +#define UART2_DMACTL_R (*((volatile uint32_t *)0x4000E048)) +#define UART2_9BITADDR_R (*((volatile uint32_t *)0x4000E0A4)) +#define UART2_9BITAMASK_R (*((volatile uint32_t *)0x4000E0A8)) +#define UART2_PP_R (*((volatile uint32_t *)0x4000EFC0)) +#define UART2_CC_R (*((volatile uint32_t *)0x4000EFC8)) + +//***************************************************************************** +// +// UART registers (UART3) +// +//***************************************************************************** +#define UART3_DR_R (*((volatile uint32_t *)0x4000F000)) +#define UART3_RSR_R (*((volatile uint32_t *)0x4000F004)) +#define UART3_ECR_R (*((volatile uint32_t *)0x4000F004)) +#define UART3_FR_R (*((volatile uint32_t *)0x4000F018)) +#define UART3_ILPR_R (*((volatile uint32_t *)0x4000F020)) +#define UART3_IBRD_R (*((volatile uint32_t *)0x4000F024)) +#define UART3_FBRD_R (*((volatile uint32_t *)0x4000F028)) +#define UART3_LCRH_R (*((volatile uint32_t *)0x4000F02C)) +#define UART3_CTL_R (*((volatile uint32_t *)0x4000F030)) +#define UART3_IFLS_R (*((volatile uint32_t *)0x4000F034)) +#define UART3_IM_R (*((volatile uint32_t *)0x4000F038)) +#define UART3_RIS_R (*((volatile uint32_t *)0x4000F03C)) +#define UART3_MIS_R (*((volatile uint32_t *)0x4000F040)) +#define UART3_ICR_R (*((volatile uint32_t *)0x4000F044)) +#define UART3_DMACTL_R (*((volatile uint32_t *)0x4000F048)) +#define UART3_9BITADDR_R (*((volatile uint32_t *)0x4000F0A4)) +#define UART3_9BITAMASK_R (*((volatile uint32_t *)0x4000F0A8)) +#define UART3_PP_R (*((volatile uint32_t *)0x4000FFC0)) +#define UART3_CC_R (*((volatile uint32_t *)0x4000FFC8)) + +//***************************************************************************** +// +// UART registers (UART4) +// +//***************************************************************************** +#define UART4_DR_R (*((volatile uint32_t *)0x40010000)) +#define UART4_RSR_R (*((volatile uint32_t *)0x40010004)) +#define UART4_ECR_R (*((volatile uint32_t *)0x40010004)) +#define UART4_FR_R (*((volatile uint32_t *)0x40010018)) +#define UART4_ILPR_R (*((volatile uint32_t *)0x40010020)) +#define UART4_IBRD_R (*((volatile uint32_t *)0x40010024)) +#define UART4_FBRD_R (*((volatile uint32_t *)0x40010028)) +#define UART4_LCRH_R (*((volatile uint32_t *)0x4001002C)) +#define UART4_CTL_R (*((volatile uint32_t *)0x40010030)) +#define UART4_IFLS_R (*((volatile uint32_t *)0x40010034)) +#define UART4_IM_R (*((volatile uint32_t *)0x40010038)) +#define UART4_RIS_R (*((volatile uint32_t *)0x4001003C)) +#define UART4_MIS_R (*((volatile uint32_t *)0x40010040)) +#define UART4_ICR_R (*((volatile uint32_t *)0x40010044)) +#define UART4_DMACTL_R (*((volatile uint32_t *)0x40010048)) +#define UART4_9BITADDR_R (*((volatile uint32_t *)0x400100A4)) +#define UART4_9BITAMASK_R (*((volatile uint32_t *)0x400100A8)) +#define UART4_PP_R (*((volatile uint32_t *)0x40010FC0)) +#define UART4_CC_R (*((volatile uint32_t *)0x40010FC8)) + +//***************************************************************************** +// +// UART registers (UART5) +// +//***************************************************************************** +#define UART5_DR_R (*((volatile uint32_t *)0x40011000)) +#define UART5_RSR_R (*((volatile uint32_t *)0x40011004)) +#define UART5_ECR_R (*((volatile uint32_t *)0x40011004)) +#define UART5_FR_R (*((volatile uint32_t *)0x40011018)) +#define UART5_ILPR_R (*((volatile uint32_t *)0x40011020)) +#define UART5_IBRD_R (*((volatile uint32_t *)0x40011024)) +#define UART5_FBRD_R (*((volatile uint32_t *)0x40011028)) +#define UART5_LCRH_R (*((volatile uint32_t *)0x4001102C)) +#define UART5_CTL_R (*((volatile uint32_t *)0x40011030)) +#define UART5_IFLS_R (*((volatile uint32_t *)0x40011034)) +#define UART5_IM_R (*((volatile uint32_t *)0x40011038)) +#define UART5_RIS_R (*((volatile uint32_t *)0x4001103C)) +#define UART5_MIS_R (*((volatile uint32_t *)0x40011040)) +#define UART5_ICR_R (*((volatile uint32_t *)0x40011044)) +#define UART5_DMACTL_R (*((volatile uint32_t *)0x40011048)) +#define UART5_9BITADDR_R (*((volatile uint32_t *)0x400110A4)) +#define UART5_9BITAMASK_R (*((volatile uint32_t *)0x400110A8)) +#define UART5_PP_R (*((volatile uint32_t *)0x40011FC0)) +#define UART5_CC_R (*((volatile uint32_t *)0x40011FC8)) + +//***************************************************************************** +// +// UART registers (UART6) +// +//***************************************************************************** +#define UART6_DR_R (*((volatile uint32_t *)0x40012000)) +#define UART6_RSR_R (*((volatile uint32_t *)0x40012004)) +#define UART6_ECR_R (*((volatile uint32_t *)0x40012004)) +#define UART6_FR_R (*((volatile uint32_t *)0x40012018)) +#define UART6_ILPR_R (*((volatile uint32_t *)0x40012020)) +#define UART6_IBRD_R (*((volatile uint32_t *)0x40012024)) +#define UART6_FBRD_R (*((volatile uint32_t *)0x40012028)) +#define UART6_LCRH_R (*((volatile uint32_t *)0x4001202C)) +#define UART6_CTL_R (*((volatile uint32_t *)0x40012030)) +#define UART6_IFLS_R (*((volatile uint32_t *)0x40012034)) +#define UART6_IM_R (*((volatile uint32_t *)0x40012038)) +#define UART6_RIS_R (*((volatile uint32_t *)0x4001203C)) +#define UART6_MIS_R (*((volatile uint32_t *)0x40012040)) +#define UART6_ICR_R (*((volatile uint32_t *)0x40012044)) +#define UART6_DMACTL_R (*((volatile uint32_t *)0x40012048)) +#define UART6_9BITADDR_R (*((volatile uint32_t *)0x400120A4)) +#define UART6_9BITAMASK_R (*((volatile uint32_t *)0x400120A8)) +#define UART6_PP_R (*((volatile uint32_t *)0x40012FC0)) +#define UART6_CC_R (*((volatile uint32_t *)0x40012FC8)) + +//***************************************************************************** +// +// UART registers (UART7) +// +//***************************************************************************** +#define UART7_DR_R (*((volatile uint32_t *)0x40013000)) +#define UART7_RSR_R (*((volatile uint32_t *)0x40013004)) +#define UART7_ECR_R (*((volatile uint32_t *)0x40013004)) +#define UART7_FR_R (*((volatile uint32_t *)0x40013018)) +#define UART7_ILPR_R (*((volatile uint32_t *)0x40013020)) +#define UART7_IBRD_R (*((volatile uint32_t *)0x40013024)) +#define UART7_FBRD_R (*((volatile uint32_t *)0x40013028)) +#define UART7_LCRH_R (*((volatile uint32_t *)0x4001302C)) +#define UART7_CTL_R (*((volatile uint32_t *)0x40013030)) +#define UART7_IFLS_R (*((volatile uint32_t *)0x40013034)) +#define UART7_IM_R (*((volatile uint32_t *)0x40013038)) +#define UART7_RIS_R (*((volatile uint32_t *)0x4001303C)) +#define UART7_MIS_R (*((volatile uint32_t *)0x40013040)) +#define UART7_ICR_R (*((volatile uint32_t *)0x40013044)) +#define UART7_DMACTL_R (*((volatile uint32_t *)0x40013048)) +#define UART7_9BITADDR_R (*((volatile uint32_t *)0x400130A4)) +#define UART7_9BITAMASK_R (*((volatile uint32_t *)0x400130A8)) +#define UART7_PP_R (*((volatile uint32_t *)0x40013FC0)) +#define UART7_CC_R (*((volatile uint32_t *)0x40013FC8)) + +//***************************************************************************** +// +// I2C registers (I2C0) +// +//***************************************************************************** +#define I2C0_MSA_R (*((volatile uint32_t *)0x40020000)) +#define I2C0_MCS_R (*((volatile uint32_t *)0x40020004)) +#define I2C0_MDR_R (*((volatile uint32_t *)0x40020008)) +#define I2C0_MTPR_R (*((volatile uint32_t *)0x4002000C)) +#define I2C0_MIMR_R (*((volatile uint32_t *)0x40020010)) +#define I2C0_MRIS_R (*((volatile uint32_t *)0x40020014)) +#define I2C0_MMIS_R (*((volatile uint32_t *)0x40020018)) +#define I2C0_MICR_R (*((volatile uint32_t *)0x4002001C)) +#define I2C0_MCR_R (*((volatile uint32_t *)0x40020020)) +#define I2C0_MCLKOCNT_R (*((volatile uint32_t *)0x40020024)) +#define I2C0_MBMON_R (*((volatile uint32_t *)0x4002002C)) +#define I2C0_MCR2_R (*((volatile uint32_t *)0x40020038)) +#define I2C0_SOAR_R (*((volatile uint32_t *)0x40020800)) +#define I2C0_SCSR_R (*((volatile uint32_t *)0x40020804)) +#define I2C0_SDR_R (*((volatile uint32_t *)0x40020808)) +#define I2C0_SIMR_R (*((volatile uint32_t *)0x4002080C)) +#define I2C0_SRIS_R (*((volatile uint32_t *)0x40020810)) +#define I2C0_SMIS_R (*((volatile uint32_t *)0x40020814)) +#define I2C0_SICR_R (*((volatile uint32_t *)0x40020818)) +#define I2C0_SOAR2_R (*((volatile uint32_t *)0x4002081C)) +#define I2C0_SACKCTL_R (*((volatile uint32_t *)0x40020820)) +#define I2C0_PP_R (*((volatile uint32_t *)0x40020FC0)) +#define I2C0_PC_R (*((volatile uint32_t *)0x40020FC4)) + +//***************************************************************************** +// +// I2C registers (I2C1) +// +//***************************************************************************** +#define I2C1_MSA_R (*((volatile uint32_t *)0x40021000)) +#define I2C1_MCS_R (*((volatile uint32_t *)0x40021004)) +#define I2C1_MDR_R (*((volatile uint32_t *)0x40021008)) +#define I2C1_MTPR_R (*((volatile uint32_t *)0x4002100C)) +#define I2C1_MIMR_R (*((volatile uint32_t *)0x40021010)) +#define I2C1_MRIS_R (*((volatile uint32_t *)0x40021014)) +#define I2C1_MMIS_R (*((volatile uint32_t *)0x40021018)) +#define I2C1_MICR_R (*((volatile uint32_t *)0x4002101C)) +#define I2C1_MCR_R (*((volatile uint32_t *)0x40021020)) +#define I2C1_MCLKOCNT_R (*((volatile uint32_t *)0x40021024)) +#define I2C1_MBMON_R (*((volatile uint32_t *)0x4002102C)) +#define I2C1_MCR2_R (*((volatile uint32_t *)0x40021038)) +#define I2C1_SOAR_R (*((volatile uint32_t *)0x40021800)) +#define I2C1_SCSR_R (*((volatile uint32_t *)0x40021804)) +#define I2C1_SDR_R (*((volatile uint32_t *)0x40021808)) +#define I2C1_SIMR_R (*((volatile uint32_t *)0x4002180C)) +#define I2C1_SRIS_R (*((volatile uint32_t *)0x40021810)) +#define I2C1_SMIS_R (*((volatile uint32_t *)0x40021814)) +#define I2C1_SICR_R (*((volatile uint32_t *)0x40021818)) +#define I2C1_SOAR2_R (*((volatile uint32_t *)0x4002181C)) +#define I2C1_SACKCTL_R (*((volatile uint32_t *)0x40021820)) +#define I2C1_PP_R (*((volatile uint32_t *)0x40021FC0)) +#define I2C1_PC_R (*((volatile uint32_t *)0x40021FC4)) + +//***************************************************************************** +// +// I2C registers (I2C2) +// +//***************************************************************************** +#define I2C2_MSA_R (*((volatile uint32_t *)0x40022000)) +#define I2C2_MCS_R (*((volatile uint32_t *)0x40022004)) +#define I2C2_MDR_R (*((volatile uint32_t *)0x40022008)) +#define I2C2_MTPR_R (*((volatile uint32_t *)0x4002200C)) +#define I2C2_MIMR_R (*((volatile uint32_t *)0x40022010)) +#define I2C2_MRIS_R (*((volatile uint32_t *)0x40022014)) +#define I2C2_MMIS_R (*((volatile uint32_t *)0x40022018)) +#define I2C2_MICR_R (*((volatile uint32_t *)0x4002201C)) +#define I2C2_MCR_R (*((volatile uint32_t *)0x40022020)) +#define I2C2_MCLKOCNT_R (*((volatile uint32_t *)0x40022024)) +#define I2C2_MBMON_R (*((volatile uint32_t *)0x4002202C)) +#define I2C2_MCR2_R (*((volatile uint32_t *)0x40022038)) +#define I2C2_SOAR_R (*((volatile uint32_t *)0x40022800)) +#define I2C2_SCSR_R (*((volatile uint32_t *)0x40022804)) +#define I2C2_SDR_R (*((volatile uint32_t *)0x40022808)) +#define I2C2_SIMR_R (*((volatile uint32_t *)0x4002280C)) +#define I2C2_SRIS_R (*((volatile uint32_t *)0x40022810)) +#define I2C2_SMIS_R (*((volatile uint32_t *)0x40022814)) +#define I2C2_SICR_R (*((volatile uint32_t *)0x40022818)) +#define I2C2_SOAR2_R (*((volatile uint32_t *)0x4002281C)) +#define I2C2_SACKCTL_R (*((volatile uint32_t *)0x40022820)) +#define I2C2_PP_R (*((volatile uint32_t *)0x40022FC0)) +#define I2C2_PC_R (*((volatile uint32_t *)0x40022FC4)) + +//***************************************************************************** +// +// I2C registers (I2C3) +// +//***************************************************************************** +#define I2C3_MSA_R (*((volatile uint32_t *)0x40023000)) +#define I2C3_MCS_R (*((volatile uint32_t *)0x40023004)) +#define I2C3_MDR_R (*((volatile uint32_t *)0x40023008)) +#define I2C3_MTPR_R (*((volatile uint32_t *)0x4002300C)) +#define I2C3_MIMR_R (*((volatile uint32_t *)0x40023010)) +#define I2C3_MRIS_R (*((volatile uint32_t *)0x40023014)) +#define I2C3_MMIS_R (*((volatile uint32_t *)0x40023018)) +#define I2C3_MICR_R (*((volatile uint32_t *)0x4002301C)) +#define I2C3_MCR_R (*((volatile uint32_t *)0x40023020)) +#define I2C3_MCLKOCNT_R (*((volatile uint32_t *)0x40023024)) +#define I2C3_MBMON_R (*((volatile uint32_t *)0x4002302C)) +#define I2C3_MCR2_R (*((volatile uint32_t *)0x40023038)) +#define I2C3_SOAR_R (*((volatile uint32_t *)0x40023800)) +#define I2C3_SCSR_R (*((volatile uint32_t *)0x40023804)) +#define I2C3_SDR_R (*((volatile uint32_t *)0x40023808)) +#define I2C3_SIMR_R (*((volatile uint32_t *)0x4002380C)) +#define I2C3_SRIS_R (*((volatile uint32_t *)0x40023810)) +#define I2C3_SMIS_R (*((volatile uint32_t *)0x40023814)) +#define I2C3_SICR_R (*((volatile uint32_t *)0x40023818)) +#define I2C3_SOAR2_R (*((volatile uint32_t *)0x4002381C)) +#define I2C3_SACKCTL_R (*((volatile uint32_t *)0x40023820)) +#define I2C3_PP_R (*((volatile uint32_t *)0x40023FC0)) +#define I2C3_PC_R (*((volatile uint32_t *)0x40023FC4)) + +//***************************************************************************** +// +// GPIO registers (PORTE) +// +//***************************************************************************** +#define GPIO_PORTE_DATA_BITS_R ((volatile uint32_t *)0x40024000) +#define GPIO_PORTE_DATA_R (*((volatile uint32_t *)0x400243FC)) +#define GPIO_PORTE_DIR_R (*((volatile uint32_t *)0x40024400)) +#define GPIO_PORTE_IS_R (*((volatile uint32_t *)0x40024404)) +#define GPIO_PORTE_IBE_R (*((volatile uint32_t *)0x40024408)) +#define GPIO_PORTE_IEV_R (*((volatile uint32_t *)0x4002440C)) +#define GPIO_PORTE_IM_R (*((volatile uint32_t *)0x40024410)) +#define GPIO_PORTE_RIS_R (*((volatile uint32_t *)0x40024414)) +#define GPIO_PORTE_MIS_R (*((volatile uint32_t *)0x40024418)) +#define GPIO_PORTE_ICR_R (*((volatile uint32_t *)0x4002441C)) +#define GPIO_PORTE_AFSEL_R (*((volatile uint32_t *)0x40024420)) +#define GPIO_PORTE_DR2R_R (*((volatile uint32_t *)0x40024500)) +#define GPIO_PORTE_DR4R_R (*((volatile uint32_t *)0x40024504)) +#define GPIO_PORTE_DR8R_R (*((volatile uint32_t *)0x40024508)) +#define GPIO_PORTE_ODR_R (*((volatile uint32_t *)0x4002450C)) +#define GPIO_PORTE_PUR_R (*((volatile uint32_t *)0x40024510)) +#define GPIO_PORTE_PDR_R (*((volatile uint32_t *)0x40024514)) +#define GPIO_PORTE_SLR_R (*((volatile uint32_t *)0x40024518)) +#define GPIO_PORTE_DEN_R (*((volatile uint32_t *)0x4002451C)) +#define GPIO_PORTE_LOCK_R (*((volatile uint32_t *)0x40024520)) +#define GPIO_PORTE_CR_R (*((volatile uint32_t *)0x40024524)) +#define GPIO_PORTE_AMSEL_R (*((volatile uint32_t *)0x40024528)) +#define GPIO_PORTE_PCTL_R (*((volatile uint32_t *)0x4002452C)) +#define GPIO_PORTE_ADCCTL_R (*((volatile uint32_t *)0x40024530)) +#define GPIO_PORTE_DMACTL_R (*((volatile uint32_t *)0x40024534)) + +//***************************************************************************** +// +// GPIO registers (PORTF) +// +//***************************************************************************** +#define GPIO_PORTF_DATA_BITS_R ((volatile uint32_t *)0x40025000) +#define GPIO_PORTF_DATA_R (*((volatile uint32_t *)0x400253FC)) +#define GPIO_PORTF_DIR_R (*((volatile uint32_t *)0x40025400)) +#define GPIO_PORTF_IS_R (*((volatile uint32_t *)0x40025404)) +#define GPIO_PORTF_IBE_R (*((volatile uint32_t *)0x40025408)) +#define GPIO_PORTF_IEV_R (*((volatile uint32_t *)0x4002540C)) +#define GPIO_PORTF_IM_R (*((volatile uint32_t *)0x40025410)) +#define GPIO_PORTF_RIS_R (*((volatile uint32_t *)0x40025414)) +#define GPIO_PORTF_MIS_R (*((volatile uint32_t *)0x40025418)) +#define GPIO_PORTF_ICR_R (*((volatile uint32_t *)0x4002541C)) +#define GPIO_PORTF_AFSEL_R (*((volatile uint32_t *)0x40025420)) +#define GPIO_PORTF_DR2R_R (*((volatile uint32_t *)0x40025500)) +#define GPIO_PORTF_DR4R_R (*((volatile uint32_t *)0x40025504)) +#define GPIO_PORTF_DR8R_R (*((volatile uint32_t *)0x40025508)) +#define GPIO_PORTF_ODR_R (*((volatile uint32_t *)0x4002550C)) +#define GPIO_PORTF_PUR_R (*((volatile uint32_t *)0x40025510)) +#define GPIO_PORTF_PDR_R (*((volatile uint32_t *)0x40025514)) +#define GPIO_PORTF_SLR_R (*((volatile uint32_t *)0x40025518)) +#define GPIO_PORTF_DEN_R (*((volatile uint32_t *)0x4002551C)) +#define GPIO_PORTF_LOCK_R (*((volatile uint32_t *)0x40025520)) +#define GPIO_PORTF_CR_R (*((volatile uint32_t *)0x40025524)) +#define GPIO_PORTF_AMSEL_R (*((volatile uint32_t *)0x40025528)) +#define GPIO_PORTF_PCTL_R (*((volatile uint32_t *)0x4002552C)) +#define GPIO_PORTF_ADCCTL_R (*((volatile uint32_t *)0x40025530)) +#define GPIO_PORTF_DMACTL_R (*((volatile uint32_t *)0x40025534)) + +//***************************************************************************** +// +// PWM registers (PWM0) +// +//***************************************************************************** +#define PWM0_CTL_R (*((volatile uint32_t *)0x40028000)) +#define PWM0_SYNC_R (*((volatile uint32_t *)0x40028004)) +#define PWM0_ENABLE_R (*((volatile uint32_t *)0x40028008)) +#define PWM0_INVERT_R (*((volatile uint32_t *)0x4002800C)) +#define PWM0_FAULT_R (*((volatile uint32_t *)0x40028010)) +#define PWM0_INTEN_R (*((volatile uint32_t *)0x40028014)) +#define PWM0_RIS_R (*((volatile uint32_t *)0x40028018)) +#define PWM0_ISC_R (*((volatile uint32_t *)0x4002801C)) +#define PWM0_STATUS_R (*((volatile uint32_t *)0x40028020)) +#define PWM0_FAULTVAL_R (*((volatile uint32_t *)0x40028024)) +#define PWM0_ENUPD_R (*((volatile uint32_t *)0x40028028)) +#define PWM0_0_CTL_R (*((volatile uint32_t *)0x40028040)) +#define PWM0_0_INTEN_R (*((volatile uint32_t *)0x40028044)) +#define PWM0_0_RIS_R (*((volatile uint32_t *)0x40028048)) +#define PWM0_0_ISC_R (*((volatile uint32_t *)0x4002804C)) +#define PWM0_0_LOAD_R (*((volatile uint32_t *)0x40028050)) +#define PWM0_0_COUNT_R (*((volatile uint32_t *)0x40028054)) +#define PWM0_0_CMPA_R (*((volatile uint32_t *)0x40028058)) +#define PWM0_0_CMPB_R (*((volatile uint32_t *)0x4002805C)) +#define PWM0_0_GENA_R (*((volatile uint32_t *)0x40028060)) +#define PWM0_0_GENB_R (*((volatile uint32_t *)0x40028064)) +#define PWM0_0_DBCTL_R (*((volatile uint32_t *)0x40028068)) +#define PWM0_0_DBRISE_R (*((volatile uint32_t *)0x4002806C)) +#define PWM0_0_DBFALL_R (*((volatile uint32_t *)0x40028070)) +#define PWM0_0_FLTSRC0_R (*((volatile uint32_t *)0x40028074)) +#define PWM0_0_FLTSRC1_R (*((volatile uint32_t *)0x40028078)) +#define PWM0_0_MINFLTPER_R (*((volatile uint32_t *)0x4002807C)) +#define PWM0_1_CTL_R (*((volatile uint32_t *)0x40028080)) +#define PWM0_1_INTEN_R (*((volatile uint32_t *)0x40028084)) +#define PWM0_1_RIS_R (*((volatile uint32_t *)0x40028088)) +#define PWM0_1_ISC_R (*((volatile uint32_t *)0x4002808C)) +#define PWM0_1_LOAD_R (*((volatile uint32_t *)0x40028090)) +#define PWM0_1_COUNT_R (*((volatile uint32_t *)0x40028094)) +#define PWM0_1_CMPA_R (*((volatile uint32_t *)0x40028098)) +#define PWM0_1_CMPB_R (*((volatile uint32_t *)0x4002809C)) +#define PWM0_1_GENA_R (*((volatile uint32_t *)0x400280A0)) +#define PWM0_1_GENB_R (*((volatile uint32_t *)0x400280A4)) +#define PWM0_1_DBCTL_R (*((volatile uint32_t *)0x400280A8)) +#define PWM0_1_DBRISE_R (*((volatile uint32_t *)0x400280AC)) +#define PWM0_1_DBFALL_R (*((volatile uint32_t *)0x400280B0)) +#define PWM0_1_FLTSRC0_R (*((volatile uint32_t *)0x400280B4)) +#define PWM0_1_FLTSRC1_R (*((volatile uint32_t *)0x400280B8)) +#define PWM0_1_MINFLTPER_R (*((volatile uint32_t *)0x400280BC)) +#define PWM0_2_CTL_R (*((volatile uint32_t *)0x400280C0)) +#define PWM0_2_INTEN_R (*((volatile uint32_t *)0x400280C4)) +#define PWM0_2_RIS_R (*((volatile uint32_t *)0x400280C8)) +#define PWM0_2_ISC_R (*((volatile uint32_t *)0x400280CC)) +#define PWM0_2_LOAD_R (*((volatile uint32_t *)0x400280D0)) +#define PWM0_2_COUNT_R (*((volatile uint32_t *)0x400280D4)) +#define PWM0_2_CMPA_R (*((volatile uint32_t *)0x400280D8)) +#define PWM0_2_CMPB_R (*((volatile uint32_t *)0x400280DC)) +#define PWM0_2_GENA_R (*((volatile uint32_t *)0x400280E0)) +#define PWM0_2_GENB_R (*((volatile uint32_t *)0x400280E4)) +#define PWM0_2_DBCTL_R (*((volatile uint32_t *)0x400280E8)) +#define PWM0_2_DBRISE_R (*((volatile uint32_t *)0x400280EC)) +#define PWM0_2_DBFALL_R (*((volatile uint32_t *)0x400280F0)) +#define PWM0_2_FLTSRC0_R (*((volatile uint32_t *)0x400280F4)) +#define PWM0_2_FLTSRC1_R (*((volatile uint32_t *)0x400280F8)) +#define PWM0_2_MINFLTPER_R (*((volatile uint32_t *)0x400280FC)) +#define PWM0_3_CTL_R (*((volatile uint32_t *)0x40028100)) +#define PWM0_3_INTEN_R (*((volatile uint32_t *)0x40028104)) +#define PWM0_3_RIS_R (*((volatile uint32_t *)0x40028108)) +#define PWM0_3_ISC_R (*((volatile uint32_t *)0x4002810C)) +#define PWM0_3_LOAD_R (*((volatile uint32_t *)0x40028110)) +#define PWM0_3_COUNT_R (*((volatile uint32_t *)0x40028114)) +#define PWM0_3_CMPA_R (*((volatile uint32_t *)0x40028118)) +#define PWM0_3_CMPB_R (*((volatile uint32_t *)0x4002811C)) +#define PWM0_3_GENA_R (*((volatile uint32_t *)0x40028120)) +#define PWM0_3_GENB_R (*((volatile uint32_t *)0x40028124)) +#define PWM0_3_DBCTL_R (*((volatile uint32_t *)0x40028128)) +#define PWM0_3_DBRISE_R (*((volatile uint32_t *)0x4002812C)) +#define PWM0_3_DBFALL_R (*((volatile uint32_t *)0x40028130)) +#define PWM0_3_FLTSRC0_R (*((volatile uint32_t *)0x40028134)) +#define PWM0_3_FLTSRC1_R (*((volatile uint32_t *)0x40028138)) +#define PWM0_3_MINFLTPER_R (*((volatile uint32_t *)0x4002813C)) +#define PWM0_0_FLTSEN_R (*((volatile uint32_t *)0x40028800)) +#define PWM0_0_FLTSTAT0_R (*((volatile uint32_t *)0x40028804)) +#define PWM0_0_FLTSTAT1_R (*((volatile uint32_t *)0x40028808)) +#define PWM0_1_FLTSEN_R (*((volatile uint32_t *)0x40028880)) +#define PWM0_1_FLTSTAT0_R (*((volatile uint32_t *)0x40028884)) +#define PWM0_1_FLTSTAT1_R (*((volatile uint32_t *)0x40028888)) +#define PWM0_2_FLTSTAT0_R (*((volatile uint32_t *)0x40028904)) +#define PWM0_2_FLTSTAT1_R (*((volatile uint32_t *)0x40028908)) +#define PWM0_3_FLTSTAT0_R (*((volatile uint32_t *)0x40028984)) +#define PWM0_3_FLTSTAT1_R (*((volatile uint32_t *)0x40028988)) +#define PWM0_PP_R (*((volatile uint32_t *)0x40028FC0)) + +//***************************************************************************** +// +// PWM registers (PWM1) +// +//***************************************************************************** +#define PWM1_CTL_R (*((volatile uint32_t *)0x40029000)) +#define PWM1_SYNC_R (*((volatile uint32_t *)0x40029004)) +#define PWM1_ENABLE_R (*((volatile uint32_t *)0x40029008)) +#define PWM1_INVERT_R (*((volatile uint32_t *)0x4002900C)) +#define PWM1_FAULT_R (*((volatile uint32_t *)0x40029010)) +#define PWM1_INTEN_R (*((volatile uint32_t *)0x40029014)) +#define PWM1_RIS_R (*((volatile uint32_t *)0x40029018)) +#define PWM1_ISC_R (*((volatile uint32_t *)0x4002901C)) +#define PWM1_STATUS_R (*((volatile uint32_t *)0x40029020)) +#define PWM1_FAULTVAL_R (*((volatile uint32_t *)0x40029024)) +#define PWM1_ENUPD_R (*((volatile uint32_t *)0x40029028)) +#define PWM1_0_CTL_R (*((volatile uint32_t *)0x40029040)) +#define PWM1_0_INTEN_R (*((volatile uint32_t *)0x40029044)) +#define PWM1_0_RIS_R (*((volatile uint32_t *)0x40029048)) +#define PWM1_0_ISC_R (*((volatile uint32_t *)0x4002904C)) +#define PWM1_0_LOAD_R (*((volatile uint32_t *)0x40029050)) +#define PWM1_0_COUNT_R (*((volatile uint32_t *)0x40029054)) +#define PWM1_0_CMPA_R (*((volatile uint32_t *)0x40029058)) +#define PWM1_0_CMPB_R (*((volatile uint32_t *)0x4002905C)) +#define PWM1_0_GENA_R (*((volatile uint32_t *)0x40029060)) +#define PWM1_0_GENB_R (*((volatile uint32_t *)0x40029064)) +#define PWM1_0_DBCTL_R (*((volatile uint32_t *)0x40029068)) +#define PWM1_0_DBRISE_R (*((volatile uint32_t *)0x4002906C)) +#define PWM1_0_DBFALL_R (*((volatile uint32_t *)0x40029070)) +#define PWM1_0_FLTSRC0_R (*((volatile uint32_t *)0x40029074)) +#define PWM1_0_FLTSRC1_R (*((volatile uint32_t *)0x40029078)) +#define PWM1_0_MINFLTPER_R (*((volatile uint32_t *)0x4002907C)) +#define PWM1_1_CTL_R (*((volatile uint32_t *)0x40029080)) +#define PWM1_1_INTEN_R (*((volatile uint32_t *)0x40029084)) +#define PWM1_1_RIS_R (*((volatile uint32_t *)0x40029088)) +#define PWM1_1_ISC_R (*((volatile uint32_t *)0x4002908C)) +#define PWM1_1_LOAD_R (*((volatile uint32_t *)0x40029090)) +#define PWM1_1_COUNT_R (*((volatile uint32_t *)0x40029094)) +#define PWM1_1_CMPA_R (*((volatile uint32_t *)0x40029098)) +#define PWM1_1_CMPB_R (*((volatile uint32_t *)0x4002909C)) +#define PWM1_1_GENA_R (*((volatile uint32_t *)0x400290A0)) +#define PWM1_1_GENB_R (*((volatile uint32_t *)0x400290A4)) +#define PWM1_1_DBCTL_R (*((volatile uint32_t *)0x400290A8)) +#define PWM1_1_DBRISE_R (*((volatile uint32_t *)0x400290AC)) +#define PWM1_1_DBFALL_R (*((volatile uint32_t *)0x400290B0)) +#define PWM1_1_FLTSRC0_R (*((volatile uint32_t *)0x400290B4)) +#define PWM1_1_FLTSRC1_R (*((volatile uint32_t *)0x400290B8)) +#define PWM1_1_MINFLTPER_R (*((volatile uint32_t *)0x400290BC)) +#define PWM1_2_CTL_R (*((volatile uint32_t *)0x400290C0)) +#define PWM1_2_INTEN_R (*((volatile uint32_t *)0x400290C4)) +#define PWM1_2_RIS_R (*((volatile uint32_t *)0x400290C8)) +#define PWM1_2_ISC_R (*((volatile uint32_t *)0x400290CC)) +#define PWM1_2_LOAD_R (*((volatile uint32_t *)0x400290D0)) +#define PWM1_2_COUNT_R (*((volatile uint32_t *)0x400290D4)) +#define PWM1_2_CMPA_R (*((volatile uint32_t *)0x400290D8)) +#define PWM1_2_CMPB_R (*((volatile uint32_t *)0x400290DC)) +#define PWM1_2_GENA_R (*((volatile uint32_t *)0x400290E0)) +#define PWM1_2_GENB_R (*((volatile uint32_t *)0x400290E4)) +#define PWM1_2_DBCTL_R (*((volatile uint32_t *)0x400290E8)) +#define PWM1_2_DBRISE_R (*((volatile uint32_t *)0x400290EC)) +#define PWM1_2_DBFALL_R (*((volatile uint32_t *)0x400290F0)) +#define PWM1_2_FLTSRC0_R (*((volatile uint32_t *)0x400290F4)) +#define PWM1_2_FLTSRC1_R (*((volatile uint32_t *)0x400290F8)) +#define PWM1_2_MINFLTPER_R (*((volatile uint32_t *)0x400290FC)) +#define PWM1_3_CTL_R (*((volatile uint32_t *)0x40029100)) +#define PWM1_3_INTEN_R (*((volatile uint32_t *)0x40029104)) +#define PWM1_3_RIS_R (*((volatile uint32_t *)0x40029108)) +#define PWM1_3_ISC_R (*((volatile uint32_t *)0x4002910C)) +#define PWM1_3_LOAD_R (*((volatile uint32_t *)0x40029110)) +#define PWM1_3_COUNT_R (*((volatile uint32_t *)0x40029114)) +#define PWM1_3_CMPA_R (*((volatile uint32_t *)0x40029118)) +#define PWM1_3_CMPB_R (*((volatile uint32_t *)0x4002911C)) +#define PWM1_3_GENA_R (*((volatile uint32_t *)0x40029120)) +#define PWM1_3_GENB_R (*((volatile uint32_t *)0x40029124)) +#define PWM1_3_DBCTL_R (*((volatile uint32_t *)0x40029128)) +#define PWM1_3_DBRISE_R (*((volatile uint32_t *)0x4002912C)) +#define PWM1_3_DBFALL_R (*((volatile uint32_t *)0x40029130)) +#define PWM1_3_FLTSRC0_R (*((volatile uint32_t *)0x40029134)) +#define PWM1_3_FLTSRC1_R (*((volatile uint32_t *)0x40029138)) +#define PWM1_3_MINFLTPER_R (*((volatile uint32_t *)0x4002913C)) +#define PWM1_0_FLTSEN_R (*((volatile uint32_t *)0x40029800)) +#define PWM1_0_FLTSTAT0_R (*((volatile uint32_t *)0x40029804)) +#define PWM1_0_FLTSTAT1_R (*((volatile uint32_t *)0x40029808)) +#define PWM1_1_FLTSEN_R (*((volatile uint32_t *)0x40029880)) +#define PWM1_1_FLTSTAT0_R (*((volatile uint32_t *)0x40029884)) +#define PWM1_1_FLTSTAT1_R (*((volatile uint32_t *)0x40029888)) +#define PWM1_2_FLTSTAT0_R (*((volatile uint32_t *)0x40029904)) +#define PWM1_2_FLTSTAT1_R (*((volatile uint32_t *)0x40029908)) +#define PWM1_3_FLTSTAT0_R (*((volatile uint32_t *)0x40029984)) +#define PWM1_3_FLTSTAT1_R (*((volatile uint32_t *)0x40029988)) +#define PWM1_PP_R (*((volatile uint32_t *)0x40029FC0)) + +//***************************************************************************** +// +// QEI registers (QEI0) +// +//***************************************************************************** +#define QEI0_CTL_R (*((volatile uint32_t *)0x4002C000)) +#define QEI0_STAT_R (*((volatile uint32_t *)0x4002C004)) +#define QEI0_POS_R (*((volatile uint32_t *)0x4002C008)) +#define QEI0_MAXPOS_R (*((volatile uint32_t *)0x4002C00C)) +#define QEI0_LOAD_R (*((volatile uint32_t *)0x4002C010)) +#define QEI0_TIME_R (*((volatile uint32_t *)0x4002C014)) +#define QEI0_COUNT_R (*((volatile uint32_t *)0x4002C018)) +#define QEI0_SPEED_R (*((volatile uint32_t *)0x4002C01C)) +#define QEI0_INTEN_R (*((volatile uint32_t *)0x4002C020)) +#define QEI0_RIS_R (*((volatile uint32_t *)0x4002C024)) +#define QEI0_ISC_R (*((volatile uint32_t *)0x4002C028)) + +//***************************************************************************** +// +// QEI registers (QEI1) +// +//***************************************************************************** +#define QEI1_CTL_R (*((volatile uint32_t *)0x4002D000)) +#define QEI1_STAT_R (*((volatile uint32_t *)0x4002D004)) +#define QEI1_POS_R (*((volatile uint32_t *)0x4002D008)) +#define QEI1_MAXPOS_R (*((volatile uint32_t *)0x4002D00C)) +#define QEI1_LOAD_R (*((volatile uint32_t *)0x4002D010)) +#define QEI1_TIME_R (*((volatile uint32_t *)0x4002D014)) +#define QEI1_COUNT_R (*((volatile uint32_t *)0x4002D018)) +#define QEI1_SPEED_R (*((volatile uint32_t *)0x4002D01C)) +#define QEI1_INTEN_R (*((volatile uint32_t *)0x4002D020)) +#define QEI1_RIS_R (*((volatile uint32_t *)0x4002D024)) +#define QEI1_ISC_R (*((volatile uint32_t *)0x4002D028)) + +//***************************************************************************** +// +// Timer registers (TIMER0) +// +//***************************************************************************** +#define TIMER0_CFG_R (*((volatile uint32_t *)0x40030000)) +#define TIMER0_TAMR_R (*((volatile uint32_t *)0x40030004)) +#define TIMER0_TBMR_R (*((volatile uint32_t *)0x40030008)) +#define TIMER0_CTL_R (*((volatile uint32_t *)0x4003000C)) +#define TIMER0_SYNC_R (*((volatile uint32_t *)0x40030010)) +#define TIMER0_IMR_R (*((volatile uint32_t *)0x40030018)) +#define TIMER0_RIS_R (*((volatile uint32_t *)0x4003001C)) +#define TIMER0_MIS_R (*((volatile uint32_t *)0x40030020)) +#define TIMER0_ICR_R (*((volatile uint32_t *)0x40030024)) +#define TIMER0_TAILR_R (*((volatile uint32_t *)0x40030028)) +#define TIMER0_TBILR_R (*((volatile uint32_t *)0x4003002C)) +#define TIMER0_TAMATCHR_R (*((volatile uint32_t *)0x40030030)) +#define TIMER0_TBMATCHR_R (*((volatile uint32_t *)0x40030034)) +#define TIMER0_TAPR_R (*((volatile uint32_t *)0x40030038)) +#define TIMER0_TBPR_R (*((volatile uint32_t *)0x4003003C)) +#define TIMER0_TAPMR_R (*((volatile uint32_t *)0x40030040)) +#define TIMER0_TBPMR_R (*((volatile uint32_t *)0x40030044)) +#define TIMER0_TAR_R (*((volatile uint32_t *)0x40030048)) +#define TIMER0_TBR_R (*((volatile uint32_t *)0x4003004C)) +#define TIMER0_TAV_R (*((volatile uint32_t *)0x40030050)) +#define TIMER0_TBV_R (*((volatile uint32_t *)0x40030054)) +#define TIMER0_RTCPD_R (*((volatile uint32_t *)0x40030058)) +#define TIMER0_TAPS_R (*((volatile uint32_t *)0x4003005C)) +#define TIMER0_TBPS_R (*((volatile uint32_t *)0x40030060)) +#define TIMER0_TAPV_R (*((volatile uint32_t *)0x40030064)) +#define TIMER0_TBPV_R (*((volatile uint32_t *)0x40030068)) +#define TIMER0_PP_R (*((volatile uint32_t *)0x40030FC0)) + +//***************************************************************************** +// +// Timer registers (TIMER1) +// +//***************************************************************************** +#define TIMER1_CFG_R (*((volatile uint32_t *)0x40031000)) +#define TIMER1_TAMR_R (*((volatile uint32_t *)0x40031004)) +#define TIMER1_TBMR_R (*((volatile uint32_t *)0x40031008)) +#define TIMER1_CTL_R (*((volatile uint32_t *)0x4003100C)) +#define TIMER1_SYNC_R (*((volatile uint32_t *)0x40031010)) +#define TIMER1_IMR_R (*((volatile uint32_t *)0x40031018)) +#define TIMER1_RIS_R (*((volatile uint32_t *)0x4003101C)) +#define TIMER1_MIS_R (*((volatile uint32_t *)0x40031020)) +#define TIMER1_ICR_R (*((volatile uint32_t *)0x40031024)) +#define TIMER1_TAILR_R (*((volatile uint32_t *)0x40031028)) +#define TIMER1_TBILR_R (*((volatile uint32_t *)0x4003102C)) +#define TIMER1_TAMATCHR_R (*((volatile uint32_t *)0x40031030)) +#define TIMER1_TBMATCHR_R (*((volatile uint32_t *)0x40031034)) +#define TIMER1_TAPR_R (*((volatile uint32_t *)0x40031038)) +#define TIMER1_TBPR_R (*((volatile uint32_t *)0x4003103C)) +#define TIMER1_TAPMR_R (*((volatile uint32_t *)0x40031040)) +#define TIMER1_TBPMR_R (*((volatile uint32_t *)0x40031044)) +#define TIMER1_TAR_R (*((volatile uint32_t *)0x40031048)) +#define TIMER1_TBR_R (*((volatile uint32_t *)0x4003104C)) +#define TIMER1_TAV_R (*((volatile uint32_t *)0x40031050)) +#define TIMER1_TBV_R (*((volatile uint32_t *)0x40031054)) +#define TIMER1_RTCPD_R (*((volatile uint32_t *)0x40031058)) +#define TIMER1_TAPS_R (*((volatile uint32_t *)0x4003105C)) +#define TIMER1_TBPS_R (*((volatile uint32_t *)0x40031060)) +#define TIMER1_TAPV_R (*((volatile uint32_t *)0x40031064)) +#define TIMER1_TBPV_R (*((volatile uint32_t *)0x40031068)) +#define TIMER1_PP_R (*((volatile uint32_t *)0x40031FC0)) + +//***************************************************************************** +// +// Timer registers (TIMER2) +// +//***************************************************************************** +#define TIMER2_CFG_R (*((volatile uint32_t *)0x40032000)) +#define TIMER2_TAMR_R (*((volatile uint32_t *)0x40032004)) +#define TIMER2_TBMR_R (*((volatile uint32_t *)0x40032008)) +#define TIMER2_CTL_R (*((volatile uint32_t *)0x4003200C)) +#define TIMER2_SYNC_R (*((volatile uint32_t *)0x40032010)) +#define TIMER2_IMR_R (*((volatile uint32_t *)0x40032018)) +#define TIMER2_RIS_R (*((volatile uint32_t *)0x4003201C)) +#define TIMER2_MIS_R (*((volatile uint32_t *)0x40032020)) +#define TIMER2_ICR_R (*((volatile uint32_t *)0x40032024)) +#define TIMER2_TAILR_R (*((volatile uint32_t *)0x40032028)) +#define TIMER2_TBILR_R (*((volatile uint32_t *)0x4003202C)) +#define TIMER2_TAMATCHR_R (*((volatile uint32_t *)0x40032030)) +#define TIMER2_TBMATCHR_R (*((volatile uint32_t *)0x40032034)) +#define TIMER2_TAPR_R (*((volatile uint32_t *)0x40032038)) +#define TIMER2_TBPR_R (*((volatile uint32_t *)0x4003203C)) +#define TIMER2_TAPMR_R (*((volatile uint32_t *)0x40032040)) +#define TIMER2_TBPMR_R (*((volatile uint32_t *)0x40032044)) +#define TIMER2_TAR_R (*((volatile uint32_t *)0x40032048)) +#define TIMER2_TBR_R (*((volatile uint32_t *)0x4003204C)) +#define TIMER2_TAV_R (*((volatile uint32_t *)0x40032050)) +#define TIMER2_TBV_R (*((volatile uint32_t *)0x40032054)) +#define TIMER2_RTCPD_R (*((volatile uint32_t *)0x40032058)) +#define TIMER2_TAPS_R (*((volatile uint32_t *)0x4003205C)) +#define TIMER2_TBPS_R (*((volatile uint32_t *)0x40032060)) +#define TIMER2_TAPV_R (*((volatile uint32_t *)0x40032064)) +#define TIMER2_TBPV_R (*((volatile uint32_t *)0x40032068)) +#define TIMER2_PP_R (*((volatile uint32_t *)0x40032FC0)) + +//***************************************************************************** +// +// Timer registers (TIMER3) +// +//***************************************************************************** +#define TIMER3_CFG_R (*((volatile uint32_t *)0x40033000)) +#define TIMER3_TAMR_R (*((volatile uint32_t *)0x40033004)) +#define TIMER3_TBMR_R (*((volatile uint32_t *)0x40033008)) +#define TIMER3_CTL_R (*((volatile uint32_t *)0x4003300C)) +#define TIMER3_SYNC_R (*((volatile uint32_t *)0x40033010)) +#define TIMER3_IMR_R (*((volatile uint32_t *)0x40033018)) +#define TIMER3_RIS_R (*((volatile uint32_t *)0x4003301C)) +#define TIMER3_MIS_R (*((volatile uint32_t *)0x40033020)) +#define TIMER3_ICR_R (*((volatile uint32_t *)0x40033024)) +#define TIMER3_TAILR_R (*((volatile uint32_t *)0x40033028)) +#define TIMER3_TBILR_R (*((volatile uint32_t *)0x4003302C)) +#define TIMER3_TAMATCHR_R (*((volatile uint32_t *)0x40033030)) +#define TIMER3_TBMATCHR_R (*((volatile uint32_t *)0x40033034)) +#define TIMER3_TAPR_R (*((volatile uint32_t *)0x40033038)) +#define TIMER3_TBPR_R (*((volatile uint32_t *)0x4003303C)) +#define TIMER3_TAPMR_R (*((volatile uint32_t *)0x40033040)) +#define TIMER3_TBPMR_R (*((volatile uint32_t *)0x40033044)) +#define TIMER3_TAR_R (*((volatile uint32_t *)0x40033048)) +#define TIMER3_TBR_R (*((volatile uint32_t *)0x4003304C)) +#define TIMER3_TAV_R (*((volatile uint32_t *)0x40033050)) +#define TIMER3_TBV_R (*((volatile uint32_t *)0x40033054)) +#define TIMER3_RTCPD_R (*((volatile uint32_t *)0x40033058)) +#define TIMER3_TAPS_R (*((volatile uint32_t *)0x4003305C)) +#define TIMER3_TBPS_R (*((volatile uint32_t *)0x40033060)) +#define TIMER3_TAPV_R (*((volatile uint32_t *)0x40033064)) +#define TIMER3_TBPV_R (*((volatile uint32_t *)0x40033068)) +#define TIMER3_PP_R (*((volatile uint32_t *)0x40033FC0)) + +//***************************************************************************** +// +// Timer registers (TIMER4) +// +//***************************************************************************** +#define TIMER4_CFG_R (*((volatile uint32_t *)0x40034000)) +#define TIMER4_TAMR_R (*((volatile uint32_t *)0x40034004)) +#define TIMER4_TBMR_R (*((volatile uint32_t *)0x40034008)) +#define TIMER4_CTL_R (*((volatile uint32_t *)0x4003400C)) +#define TIMER4_SYNC_R (*((volatile uint32_t *)0x40034010)) +#define TIMER4_IMR_R (*((volatile uint32_t *)0x40034018)) +#define TIMER4_RIS_R (*((volatile uint32_t *)0x4003401C)) +#define TIMER4_MIS_R (*((volatile uint32_t *)0x40034020)) +#define TIMER4_ICR_R (*((volatile uint32_t *)0x40034024)) +#define TIMER4_TAILR_R (*((volatile uint32_t *)0x40034028)) +#define TIMER4_TBILR_R (*((volatile uint32_t *)0x4003402C)) +#define TIMER4_TAMATCHR_R (*((volatile uint32_t *)0x40034030)) +#define TIMER4_TBMATCHR_R (*((volatile uint32_t *)0x40034034)) +#define TIMER4_TAPR_R (*((volatile uint32_t *)0x40034038)) +#define TIMER4_TBPR_R (*((volatile uint32_t *)0x4003403C)) +#define TIMER4_TAPMR_R (*((volatile uint32_t *)0x40034040)) +#define TIMER4_TBPMR_R (*((volatile uint32_t *)0x40034044)) +#define TIMER4_TAR_R (*((volatile uint32_t *)0x40034048)) +#define TIMER4_TBR_R (*((volatile uint32_t *)0x4003404C)) +#define TIMER4_TAV_R (*((volatile uint32_t *)0x40034050)) +#define TIMER4_TBV_R (*((volatile uint32_t *)0x40034054)) +#define TIMER4_RTCPD_R (*((volatile uint32_t *)0x40034058)) +#define TIMER4_TAPS_R (*((volatile uint32_t *)0x4003405C)) +#define TIMER4_TBPS_R (*((volatile uint32_t *)0x40034060)) +#define TIMER4_TAPV_R (*((volatile uint32_t *)0x40034064)) +#define TIMER4_TBPV_R (*((volatile uint32_t *)0x40034068)) +#define TIMER4_PP_R (*((volatile uint32_t *)0x40034FC0)) + +//***************************************************************************** +// +// Timer registers (TIMER5) +// +//***************************************************************************** +#define TIMER5_CFG_R (*((volatile uint32_t *)0x40035000)) +#define TIMER5_TAMR_R (*((volatile uint32_t *)0x40035004)) +#define TIMER5_TBMR_R (*((volatile uint32_t *)0x40035008)) +#define TIMER5_CTL_R (*((volatile uint32_t *)0x4003500C)) +#define TIMER5_SYNC_R (*((volatile uint32_t *)0x40035010)) +#define TIMER5_IMR_R (*((volatile uint32_t *)0x40035018)) +#define TIMER5_RIS_R (*((volatile uint32_t *)0x4003501C)) +#define TIMER5_MIS_R (*((volatile uint32_t *)0x40035020)) +#define TIMER5_ICR_R (*((volatile uint32_t *)0x40035024)) +#define TIMER5_TAILR_R (*((volatile uint32_t *)0x40035028)) +#define TIMER5_TBILR_R (*((volatile uint32_t *)0x4003502C)) +#define TIMER5_TAMATCHR_R (*((volatile uint32_t *)0x40035030)) +#define TIMER5_TBMATCHR_R (*((volatile uint32_t *)0x40035034)) +#define TIMER5_TAPR_R (*((volatile uint32_t *)0x40035038)) +#define TIMER5_TBPR_R (*((volatile uint32_t *)0x4003503C)) +#define TIMER5_TAPMR_R (*((volatile uint32_t *)0x40035040)) +#define TIMER5_TBPMR_R (*((volatile uint32_t *)0x40035044)) +#define TIMER5_TAR_R (*((volatile uint32_t *)0x40035048)) +#define TIMER5_TBR_R (*((volatile uint32_t *)0x4003504C)) +#define TIMER5_TAV_R (*((volatile uint32_t *)0x40035050)) +#define TIMER5_TBV_R (*((volatile uint32_t *)0x40035054)) +#define TIMER5_RTCPD_R (*((volatile uint32_t *)0x40035058)) +#define TIMER5_TAPS_R (*((volatile uint32_t *)0x4003505C)) +#define TIMER5_TBPS_R (*((volatile uint32_t *)0x40035060)) +#define TIMER5_TAPV_R (*((volatile uint32_t *)0x40035064)) +#define TIMER5_TBPV_R (*((volatile uint32_t *)0x40035068)) +#define TIMER5_PP_R (*((volatile uint32_t *)0x40035FC0)) + +//***************************************************************************** +// +// Timer registers (WTIMER0) +// +//***************************************************************************** +#define WTIMER0_CFG_R (*((volatile uint32_t *)0x40036000)) +#define WTIMER0_TAMR_R (*((volatile uint32_t *)0x40036004)) +#define WTIMER0_TBMR_R (*((volatile uint32_t *)0x40036008)) +#define WTIMER0_CTL_R (*((volatile uint32_t *)0x4003600C)) +#define WTIMER0_SYNC_R (*((volatile uint32_t *)0x40036010)) +#define WTIMER0_IMR_R (*((volatile uint32_t *)0x40036018)) +#define WTIMER0_RIS_R (*((volatile uint32_t *)0x4003601C)) +#define WTIMER0_MIS_R (*((volatile uint32_t *)0x40036020)) +#define WTIMER0_ICR_R (*((volatile uint32_t *)0x40036024)) +#define WTIMER0_TAILR_R (*((volatile uint32_t *)0x40036028)) +#define WTIMER0_TBILR_R (*((volatile uint32_t *)0x4003602C)) +#define WTIMER0_TAMATCHR_R (*((volatile uint32_t *)0x40036030)) +#define WTIMER0_TBMATCHR_R (*((volatile uint32_t *)0x40036034)) +#define WTIMER0_TAPR_R (*((volatile uint32_t *)0x40036038)) +#define WTIMER0_TBPR_R (*((volatile uint32_t *)0x4003603C)) +#define WTIMER0_TAPMR_R (*((volatile uint32_t *)0x40036040)) +#define WTIMER0_TBPMR_R (*((volatile uint32_t *)0x40036044)) +#define WTIMER0_TAR_R (*((volatile uint32_t *)0x40036048)) +#define WTIMER0_TBR_R (*((volatile uint32_t *)0x4003604C)) +#define WTIMER0_TAV_R (*((volatile uint32_t *)0x40036050)) +#define WTIMER0_TBV_R (*((volatile uint32_t *)0x40036054)) +#define WTIMER0_RTCPD_R (*((volatile uint32_t *)0x40036058)) +#define WTIMER0_TAPS_R (*((volatile uint32_t *)0x4003605C)) +#define WTIMER0_TBPS_R (*((volatile uint32_t *)0x40036060)) +#define WTIMER0_TAPV_R (*((volatile uint32_t *)0x40036064)) +#define WTIMER0_TBPV_R (*((volatile uint32_t *)0x40036068)) +#define WTIMER0_PP_R (*((volatile uint32_t *)0x40036FC0)) + +//***************************************************************************** +// +// Timer registers (WTIMER1) +// +//***************************************************************************** +#define WTIMER1_CFG_R (*((volatile uint32_t *)0x40037000)) +#define WTIMER1_TAMR_R (*((volatile uint32_t *)0x40037004)) +#define WTIMER1_TBMR_R (*((volatile uint32_t *)0x40037008)) +#define WTIMER1_CTL_R (*((volatile uint32_t *)0x4003700C)) +#define WTIMER1_SYNC_R (*((volatile uint32_t *)0x40037010)) +#define WTIMER1_IMR_R (*((volatile uint32_t *)0x40037018)) +#define WTIMER1_RIS_R (*((volatile uint32_t *)0x4003701C)) +#define WTIMER1_MIS_R (*((volatile uint32_t *)0x40037020)) +#define WTIMER1_ICR_R (*((volatile uint32_t *)0x40037024)) +#define WTIMER1_TAILR_R (*((volatile uint32_t *)0x40037028)) +#define WTIMER1_TBILR_R (*((volatile uint32_t *)0x4003702C)) +#define WTIMER1_TAMATCHR_R (*((volatile uint32_t *)0x40037030)) +#define WTIMER1_TBMATCHR_R (*((volatile uint32_t *)0x40037034)) +#define WTIMER1_TAPR_R (*((volatile uint32_t *)0x40037038)) +#define WTIMER1_TBPR_R (*((volatile uint32_t *)0x4003703C)) +#define WTIMER1_TAPMR_R (*((volatile uint32_t *)0x40037040)) +#define WTIMER1_TBPMR_R (*((volatile uint32_t *)0x40037044)) +#define WTIMER1_TAR_R (*((volatile uint32_t *)0x40037048)) +#define WTIMER1_TBR_R (*((volatile uint32_t *)0x4003704C)) +#define WTIMER1_TAV_R (*((volatile uint32_t *)0x40037050)) +#define WTIMER1_TBV_R (*((volatile uint32_t *)0x40037054)) +#define WTIMER1_RTCPD_R (*((volatile uint32_t *)0x40037058)) +#define WTIMER1_TAPS_R (*((volatile uint32_t *)0x4003705C)) +#define WTIMER1_TBPS_R (*((volatile uint32_t *)0x40037060)) +#define WTIMER1_TAPV_R (*((volatile uint32_t *)0x40037064)) +#define WTIMER1_TBPV_R (*((volatile uint32_t *)0x40037068)) +#define WTIMER1_PP_R (*((volatile uint32_t *)0x40037FC0)) + +//***************************************************************************** +// +// ADC registers (ADC0) +// +//***************************************************************************** +#define ADC0_ACTSS_R (*((volatile uint32_t *)0x40038000)) +#define ADC0_RIS_R (*((volatile uint32_t *)0x40038004)) +#define ADC0_IM_R (*((volatile uint32_t *)0x40038008)) +#define ADC0_ISC_R (*((volatile uint32_t *)0x4003800C)) +#define ADC0_OSTAT_R (*((volatile uint32_t *)0x40038010)) +#define ADC0_EMUX_R (*((volatile uint32_t *)0x40038014)) +#define ADC0_USTAT_R (*((volatile uint32_t *)0x40038018)) +#define ADC0_TSSEL_R (*((volatile uint32_t *)0x4003801C)) +#define ADC0_SSPRI_R (*((volatile uint32_t *)0x40038020)) +#define ADC0_SPC_R (*((volatile uint32_t *)0x40038024)) +#define ADC0_PSSI_R (*((volatile uint32_t *)0x40038028)) +#define ADC0_SAC_R (*((volatile uint32_t *)0x40038030)) +#define ADC0_DCISC_R (*((volatile uint32_t *)0x40038034)) +#define ADC0_CTL_R (*((volatile uint32_t *)0x40038038)) +#define ADC0_SSMUX0_R (*((volatile uint32_t *)0x40038040)) +#define ADC0_SSCTL0_R (*((volatile uint32_t *)0x40038044)) +#define ADC0_SSFIFO0_R (*((volatile uint32_t *)0x40038048)) +#define ADC0_SSFSTAT0_R (*((volatile uint32_t *)0x4003804C)) +#define ADC0_SSOP0_R (*((volatile uint32_t *)0x40038050)) +#define ADC0_SSDC0_R (*((volatile uint32_t *)0x40038054)) +#define ADC0_SSMUX1_R (*((volatile uint32_t *)0x40038060)) +#define ADC0_SSCTL1_R (*((volatile uint32_t *)0x40038064)) +#define ADC0_SSFIFO1_R (*((volatile uint32_t *)0x40038068)) +#define ADC0_SSFSTAT1_R (*((volatile uint32_t *)0x4003806C)) +#define ADC0_SSOP1_R (*((volatile uint32_t *)0x40038070)) +#define ADC0_SSDC1_R (*((volatile uint32_t *)0x40038074)) +#define ADC0_SSMUX2_R (*((volatile uint32_t *)0x40038080)) +#define ADC0_SSCTL2_R (*((volatile uint32_t *)0x40038084)) +#define ADC0_SSFIFO2_R (*((volatile uint32_t *)0x40038088)) +#define ADC0_SSFSTAT2_R (*((volatile uint32_t *)0x4003808C)) +#define ADC0_SSOP2_R (*((volatile uint32_t *)0x40038090)) +#define ADC0_SSDC2_R (*((volatile uint32_t *)0x40038094)) +#define ADC0_SSMUX3_R (*((volatile uint32_t *)0x400380A0)) +#define ADC0_SSCTL3_R (*((volatile uint32_t *)0x400380A4)) +#define ADC0_SSFIFO3_R (*((volatile uint32_t *)0x400380A8)) +#define ADC0_SSFSTAT3_R (*((volatile uint32_t *)0x400380AC)) +#define ADC0_SSOP3_R (*((volatile uint32_t *)0x400380B0)) +#define ADC0_SSDC3_R (*((volatile uint32_t *)0x400380B4)) +#define ADC0_DCRIC_R (*((volatile uint32_t *)0x40038D00)) +#define ADC0_DCCTL0_R (*((volatile uint32_t *)0x40038E00)) +#define ADC0_DCCTL1_R (*((volatile uint32_t *)0x40038E04)) +#define ADC0_DCCTL2_R (*((volatile uint32_t *)0x40038E08)) +#define ADC0_DCCTL3_R (*((volatile uint32_t *)0x40038E0C)) +#define ADC0_DCCTL4_R (*((volatile uint32_t *)0x40038E10)) +#define ADC0_DCCTL5_R (*((volatile uint32_t *)0x40038E14)) +#define ADC0_DCCTL6_R (*((volatile uint32_t *)0x40038E18)) +#define ADC0_DCCTL7_R (*((volatile uint32_t *)0x40038E1C)) +#define ADC0_DCCMP0_R (*((volatile uint32_t *)0x40038E40)) +#define ADC0_DCCMP1_R (*((volatile uint32_t *)0x40038E44)) +#define ADC0_DCCMP2_R (*((volatile uint32_t *)0x40038E48)) +#define ADC0_DCCMP3_R (*((volatile uint32_t *)0x40038E4C)) +#define ADC0_DCCMP4_R (*((volatile uint32_t *)0x40038E50)) +#define ADC0_DCCMP5_R (*((volatile uint32_t *)0x40038E54)) +#define ADC0_DCCMP6_R (*((volatile uint32_t *)0x40038E58)) +#define ADC0_DCCMP7_R (*((volatile uint32_t *)0x40038E5C)) +#define ADC0_PP_R (*((volatile uint32_t *)0x40038FC0)) +#define ADC0_PC_R (*((volatile uint32_t *)0x40038FC4)) +#define ADC0_CC_R (*((volatile uint32_t *)0x40038FC8)) + +//***************************************************************************** +// +// ADC registers (ADC1) +// +//***************************************************************************** +#define ADC1_ACTSS_R (*((volatile uint32_t *)0x40039000)) +#define ADC1_RIS_R (*((volatile uint32_t *)0x40039004)) +#define ADC1_IM_R (*((volatile uint32_t *)0x40039008)) +#define ADC1_ISC_R (*((volatile uint32_t *)0x4003900C)) +#define ADC1_OSTAT_R (*((volatile uint32_t *)0x40039010)) +#define ADC1_EMUX_R (*((volatile uint32_t *)0x40039014)) +#define ADC1_USTAT_R (*((volatile uint32_t *)0x40039018)) +#define ADC1_TSSEL_R (*((volatile uint32_t *)0x4003901C)) +#define ADC1_SSPRI_R (*((volatile uint32_t *)0x40039020)) +#define ADC1_SPC_R (*((volatile uint32_t *)0x40039024)) +#define ADC1_PSSI_R (*((volatile uint32_t *)0x40039028)) +#define ADC1_SAC_R (*((volatile uint32_t *)0x40039030)) +#define ADC1_DCISC_R (*((volatile uint32_t *)0x40039034)) +#define ADC1_CTL_R (*((volatile uint32_t *)0x40039038)) +#define ADC1_SSMUX0_R (*((volatile uint32_t *)0x40039040)) +#define ADC1_SSCTL0_R (*((volatile uint32_t *)0x40039044)) +#define ADC1_SSFIFO0_R (*((volatile uint32_t *)0x40039048)) +#define ADC1_SSFSTAT0_R (*((volatile uint32_t *)0x4003904C)) +#define ADC1_SSOP0_R (*((volatile uint32_t *)0x40039050)) +#define ADC1_SSDC0_R (*((volatile uint32_t *)0x40039054)) +#define ADC1_SSMUX1_R (*((volatile uint32_t *)0x40039060)) +#define ADC1_SSCTL1_R (*((volatile uint32_t *)0x40039064)) +#define ADC1_SSFIFO1_R (*((volatile uint32_t *)0x40039068)) +#define ADC1_SSFSTAT1_R (*((volatile uint32_t *)0x4003906C)) +#define ADC1_SSOP1_R (*((volatile uint32_t *)0x40039070)) +#define ADC1_SSDC1_R (*((volatile uint32_t *)0x40039074)) +#define ADC1_SSMUX2_R (*((volatile uint32_t *)0x40039080)) +#define ADC1_SSCTL2_R (*((volatile uint32_t *)0x40039084)) +#define ADC1_SSFIFO2_R (*((volatile uint32_t *)0x40039088)) +#define ADC1_SSFSTAT2_R (*((volatile uint32_t *)0x4003908C)) +#define ADC1_SSOP2_R (*((volatile uint32_t *)0x40039090)) +#define ADC1_SSDC2_R (*((volatile uint32_t *)0x40039094)) +#define ADC1_SSMUX3_R (*((volatile uint32_t *)0x400390A0)) +#define ADC1_SSCTL3_R (*((volatile uint32_t *)0x400390A4)) +#define ADC1_SSFIFO3_R (*((volatile uint32_t *)0x400390A8)) +#define ADC1_SSFSTAT3_R (*((volatile uint32_t *)0x400390AC)) +#define ADC1_SSOP3_R (*((volatile uint32_t *)0x400390B0)) +#define ADC1_SSDC3_R (*((volatile uint32_t *)0x400390B4)) +#define ADC1_DCRIC_R (*((volatile uint32_t *)0x40039D00)) +#define ADC1_DCCTL0_R (*((volatile uint32_t *)0x40039E00)) +#define ADC1_DCCTL1_R (*((volatile uint32_t *)0x40039E04)) +#define ADC1_DCCTL2_R (*((volatile uint32_t *)0x40039E08)) +#define ADC1_DCCTL3_R (*((volatile uint32_t *)0x40039E0C)) +#define ADC1_DCCTL4_R (*((volatile uint32_t *)0x40039E10)) +#define ADC1_DCCTL5_R (*((volatile uint32_t *)0x40039E14)) +#define ADC1_DCCTL6_R (*((volatile uint32_t *)0x40039E18)) +#define ADC1_DCCTL7_R (*((volatile uint32_t *)0x40039E1C)) +#define ADC1_DCCMP0_R (*((volatile uint32_t *)0x40039E40)) +#define ADC1_DCCMP1_R (*((volatile uint32_t *)0x40039E44)) +#define ADC1_DCCMP2_R (*((volatile uint32_t *)0x40039E48)) +#define ADC1_DCCMP3_R (*((volatile uint32_t *)0x40039E4C)) +#define ADC1_DCCMP4_R (*((volatile uint32_t *)0x40039E50)) +#define ADC1_DCCMP5_R (*((volatile uint32_t *)0x40039E54)) +#define ADC1_DCCMP6_R (*((volatile uint32_t *)0x40039E58)) +#define ADC1_DCCMP7_R (*((volatile uint32_t *)0x40039E5C)) +#define ADC1_PP_R (*((volatile uint32_t *)0x40039FC0)) +#define ADC1_PC_R (*((volatile uint32_t *)0x40039FC4)) +#define ADC1_CC_R (*((volatile uint32_t *)0x40039FC8)) + +//***************************************************************************** +// +// Comparator registers (COMP) +// +//***************************************************************************** +#define COMP_ACMIS_R (*((volatile uint32_t *)0x4003C000)) +#define COMP_ACRIS_R (*((volatile uint32_t *)0x4003C004)) +#define COMP_ACINTEN_R (*((volatile uint32_t *)0x4003C008)) +#define COMP_ACREFCTL_R (*((volatile uint32_t *)0x4003C010)) +#define COMP_ACSTAT0_R (*((volatile uint32_t *)0x4003C020)) +#define COMP_ACCTL0_R (*((volatile uint32_t *)0x4003C024)) +#define COMP_ACSTAT1_R (*((volatile uint32_t *)0x4003C040)) +#define COMP_ACCTL1_R (*((volatile uint32_t *)0x4003C044)) +#define COMP_PP_R (*((volatile uint32_t *)0x4003CFC0)) + +//***************************************************************************** +// +// CAN registers (CAN0) +// +//***************************************************************************** +#define CAN0_CTL_R (*((volatile uint32_t *)0x40040000)) +#define CAN0_STS_R (*((volatile uint32_t *)0x40040004)) +#define CAN0_ERR_R (*((volatile uint32_t *)0x40040008)) +#define CAN0_BIT_R (*((volatile uint32_t *)0x4004000C)) +#define CAN0_INT_R (*((volatile uint32_t *)0x40040010)) +#define CAN0_TST_R (*((volatile uint32_t *)0x40040014)) +#define CAN0_BRPE_R (*((volatile uint32_t *)0x40040018)) +#define CAN0_IF1CRQ_R (*((volatile uint32_t *)0x40040020)) +#define CAN0_IF1CMSK_R (*((volatile uint32_t *)0x40040024)) +#define CAN0_IF1MSK1_R (*((volatile uint32_t *)0x40040028)) +#define CAN0_IF1MSK2_R (*((volatile uint32_t *)0x4004002C)) +#define CAN0_IF1ARB1_R (*((volatile uint32_t *)0x40040030)) +#define CAN0_IF1ARB2_R (*((volatile uint32_t *)0x40040034)) +#define CAN0_IF1MCTL_R (*((volatile uint32_t *)0x40040038)) +#define CAN0_IF1DA1_R (*((volatile uint32_t *)0x4004003C)) +#define CAN0_IF1DA2_R (*((volatile uint32_t *)0x40040040)) +#define CAN0_IF1DB1_R (*((volatile uint32_t *)0x40040044)) +#define CAN0_IF1DB2_R (*((volatile uint32_t *)0x40040048)) +#define CAN0_IF2CRQ_R (*((volatile uint32_t *)0x40040080)) +#define CAN0_IF2CMSK_R (*((volatile uint32_t *)0x40040084)) +#define CAN0_IF2MSK1_R (*((volatile uint32_t *)0x40040088)) +#define CAN0_IF2MSK2_R (*((volatile uint32_t *)0x4004008C)) +#define CAN0_IF2ARB1_R (*((volatile uint32_t *)0x40040090)) +#define CAN0_IF2ARB2_R (*((volatile uint32_t *)0x40040094)) +#define CAN0_IF2MCTL_R (*((volatile uint32_t *)0x40040098)) +#define CAN0_IF2DA1_R (*((volatile uint32_t *)0x4004009C)) +#define CAN0_IF2DA2_R (*((volatile uint32_t *)0x400400A0)) +#define CAN0_IF2DB1_R (*((volatile uint32_t *)0x400400A4)) +#define CAN0_IF2DB2_R (*((volatile uint32_t *)0x400400A8)) +#define CAN0_TXRQ1_R (*((volatile uint32_t *)0x40040100)) +#define CAN0_TXRQ2_R (*((volatile uint32_t *)0x40040104)) +#define CAN0_NWDA1_R (*((volatile uint32_t *)0x40040120)) +#define CAN0_NWDA2_R (*((volatile uint32_t *)0x40040124)) +#define CAN0_MSG1INT_R (*((volatile uint32_t *)0x40040140)) +#define CAN0_MSG2INT_R (*((volatile uint32_t *)0x40040144)) +#define CAN0_MSG1VAL_R (*((volatile uint32_t *)0x40040160)) +#define CAN0_MSG2VAL_R (*((volatile uint32_t *)0x40040164)) + +//***************************************************************************** +// +// CAN registers (CAN1) +// +//***************************************************************************** +#define CAN1_CTL_R (*((volatile uint32_t *)0x40041000)) +#define CAN1_STS_R (*((volatile uint32_t *)0x40041004)) +#define CAN1_ERR_R (*((volatile uint32_t *)0x40041008)) +#define CAN1_BIT_R (*((volatile uint32_t *)0x4004100C)) +#define CAN1_INT_R (*((volatile uint32_t *)0x40041010)) +#define CAN1_TST_R (*((volatile uint32_t *)0x40041014)) +#define CAN1_BRPE_R (*((volatile uint32_t *)0x40041018)) +#define CAN1_IF1CRQ_R (*((volatile uint32_t *)0x40041020)) +#define CAN1_IF1CMSK_R (*((volatile uint32_t *)0x40041024)) +#define CAN1_IF1MSK1_R (*((volatile uint32_t *)0x40041028)) +#define CAN1_IF1MSK2_R (*((volatile uint32_t *)0x4004102C)) +#define CAN1_IF1ARB1_R (*((volatile uint32_t *)0x40041030)) +#define CAN1_IF1ARB2_R (*((volatile uint32_t *)0x40041034)) +#define CAN1_IF1MCTL_R (*((volatile uint32_t *)0x40041038)) +#define CAN1_IF1DA1_R (*((volatile uint32_t *)0x4004103C)) +#define CAN1_IF1DA2_R (*((volatile uint32_t *)0x40041040)) +#define CAN1_IF1DB1_R (*((volatile uint32_t *)0x40041044)) +#define CAN1_IF1DB2_R (*((volatile uint32_t *)0x40041048)) +#define CAN1_IF2CRQ_R (*((volatile uint32_t *)0x40041080)) +#define CAN1_IF2CMSK_R (*((volatile uint32_t *)0x40041084)) +#define CAN1_IF2MSK1_R (*((volatile uint32_t *)0x40041088)) +#define CAN1_IF2MSK2_R (*((volatile uint32_t *)0x4004108C)) +#define CAN1_IF2ARB1_R (*((volatile uint32_t *)0x40041090)) +#define CAN1_IF2ARB2_R (*((volatile uint32_t *)0x40041094)) +#define CAN1_IF2MCTL_R (*((volatile uint32_t *)0x40041098)) +#define CAN1_IF2DA1_R (*((volatile uint32_t *)0x4004109C)) +#define CAN1_IF2DA2_R (*((volatile uint32_t *)0x400410A0)) +#define CAN1_IF2DB1_R (*((volatile uint32_t *)0x400410A4)) +#define CAN1_IF2DB2_R (*((volatile uint32_t *)0x400410A8)) +#define CAN1_TXRQ1_R (*((volatile uint32_t *)0x40041100)) +#define CAN1_TXRQ2_R (*((volatile uint32_t *)0x40041104)) +#define CAN1_NWDA1_R (*((volatile uint32_t *)0x40041120)) +#define CAN1_NWDA2_R (*((volatile uint32_t *)0x40041124)) +#define CAN1_MSG1INT_R (*((volatile uint32_t *)0x40041140)) +#define CAN1_MSG2INT_R (*((volatile uint32_t *)0x40041144)) +#define CAN1_MSG1VAL_R (*((volatile uint32_t *)0x40041160)) +#define CAN1_MSG2VAL_R (*((volatile uint32_t *)0x40041164)) + +//***************************************************************************** +// +// Timer registers (WTIMER2) +// +//***************************************************************************** +#define WTIMER2_CFG_R (*((volatile uint32_t *)0x4004C000)) +#define WTIMER2_TAMR_R (*((volatile uint32_t *)0x4004C004)) +#define WTIMER2_TBMR_R (*((volatile uint32_t *)0x4004C008)) +#define WTIMER2_CTL_R (*((volatile uint32_t *)0x4004C00C)) +#define WTIMER2_SYNC_R (*((volatile uint32_t *)0x4004C010)) +#define WTIMER2_IMR_R (*((volatile uint32_t *)0x4004C018)) +#define WTIMER2_RIS_R (*((volatile uint32_t *)0x4004C01C)) +#define WTIMER2_MIS_R (*((volatile uint32_t *)0x4004C020)) +#define WTIMER2_ICR_R (*((volatile uint32_t *)0x4004C024)) +#define WTIMER2_TAILR_R (*((volatile uint32_t *)0x4004C028)) +#define WTIMER2_TBILR_R (*((volatile uint32_t *)0x4004C02C)) +#define WTIMER2_TAMATCHR_R (*((volatile uint32_t *)0x4004C030)) +#define WTIMER2_TBMATCHR_R (*((volatile uint32_t *)0x4004C034)) +#define WTIMER2_TAPR_R (*((volatile uint32_t *)0x4004C038)) +#define WTIMER2_TBPR_R (*((volatile uint32_t *)0x4004C03C)) +#define WTIMER2_TAPMR_R (*((volatile uint32_t *)0x4004C040)) +#define WTIMER2_TBPMR_R (*((volatile uint32_t *)0x4004C044)) +#define WTIMER2_TAR_R (*((volatile uint32_t *)0x4004C048)) +#define WTIMER2_TBR_R (*((volatile uint32_t *)0x4004C04C)) +#define WTIMER2_TAV_R (*((volatile uint32_t *)0x4004C050)) +#define WTIMER2_TBV_R (*((volatile uint32_t *)0x4004C054)) +#define WTIMER2_RTCPD_R (*((volatile uint32_t *)0x4004C058)) +#define WTIMER2_TAPS_R (*((volatile uint32_t *)0x4004C05C)) +#define WTIMER2_TBPS_R (*((volatile uint32_t *)0x4004C060)) +#define WTIMER2_TAPV_R (*((volatile uint32_t *)0x4004C064)) +#define WTIMER2_TBPV_R (*((volatile uint32_t *)0x4004C068)) +#define WTIMER2_PP_R (*((volatile uint32_t *)0x4004CFC0)) + +//***************************************************************************** +// +// Timer registers (WTIMER3) +// +//***************************************************************************** +#define WTIMER3_CFG_R (*((volatile uint32_t *)0x4004D000)) +#define WTIMER3_TAMR_R (*((volatile uint32_t *)0x4004D004)) +#define WTIMER3_TBMR_R (*((volatile uint32_t *)0x4004D008)) +#define WTIMER3_CTL_R (*((volatile uint32_t *)0x4004D00C)) +#define WTIMER3_SYNC_R (*((volatile uint32_t *)0x4004D010)) +#define WTIMER3_IMR_R (*((volatile uint32_t *)0x4004D018)) +#define WTIMER3_RIS_R (*((volatile uint32_t *)0x4004D01C)) +#define WTIMER3_MIS_R (*((volatile uint32_t *)0x4004D020)) +#define WTIMER3_ICR_R (*((volatile uint32_t *)0x4004D024)) +#define WTIMER3_TAILR_R (*((volatile uint32_t *)0x4004D028)) +#define WTIMER3_TBILR_R (*((volatile uint32_t *)0x4004D02C)) +#define WTIMER3_TAMATCHR_R (*((volatile uint32_t *)0x4004D030)) +#define WTIMER3_TBMATCHR_R (*((volatile uint32_t *)0x4004D034)) +#define WTIMER3_TAPR_R (*((volatile uint32_t *)0x4004D038)) +#define WTIMER3_TBPR_R (*((volatile uint32_t *)0x4004D03C)) +#define WTIMER3_TAPMR_R (*((volatile uint32_t *)0x4004D040)) +#define WTIMER3_TBPMR_R (*((volatile uint32_t *)0x4004D044)) +#define WTIMER3_TAR_R (*((volatile uint32_t *)0x4004D048)) +#define WTIMER3_TBR_R (*((volatile uint32_t *)0x4004D04C)) +#define WTIMER3_TAV_R (*((volatile uint32_t *)0x4004D050)) +#define WTIMER3_TBV_R (*((volatile uint32_t *)0x4004D054)) +#define WTIMER3_RTCPD_R (*((volatile uint32_t *)0x4004D058)) +#define WTIMER3_TAPS_R (*((volatile uint32_t *)0x4004D05C)) +#define WTIMER3_TBPS_R (*((volatile uint32_t *)0x4004D060)) +#define WTIMER3_TAPV_R (*((volatile uint32_t *)0x4004D064)) +#define WTIMER3_TBPV_R (*((volatile uint32_t *)0x4004D068)) +#define WTIMER3_PP_R (*((volatile uint32_t *)0x4004DFC0)) + +//***************************************************************************** +// +// Timer registers (WTIMER4) +// +//***************************************************************************** +#define WTIMER4_CFG_R (*((volatile uint32_t *)0x4004E000)) +#define WTIMER4_TAMR_R (*((volatile uint32_t *)0x4004E004)) +#define WTIMER4_TBMR_R (*((volatile uint32_t *)0x4004E008)) +#define WTIMER4_CTL_R (*((volatile uint32_t *)0x4004E00C)) +#define WTIMER4_SYNC_R (*((volatile uint32_t *)0x4004E010)) +#define WTIMER4_IMR_R (*((volatile uint32_t *)0x4004E018)) +#define WTIMER4_RIS_R (*((volatile uint32_t *)0x4004E01C)) +#define WTIMER4_MIS_R (*((volatile uint32_t *)0x4004E020)) +#define WTIMER4_ICR_R (*((volatile uint32_t *)0x4004E024)) +#define WTIMER4_TAILR_R (*((volatile uint32_t *)0x4004E028)) +#define WTIMER4_TBILR_R (*((volatile uint32_t *)0x4004E02C)) +#define WTIMER4_TAMATCHR_R (*((volatile uint32_t *)0x4004E030)) +#define WTIMER4_TBMATCHR_R (*((volatile uint32_t *)0x4004E034)) +#define WTIMER4_TAPR_R (*((volatile uint32_t *)0x4004E038)) +#define WTIMER4_TBPR_R (*((volatile uint32_t *)0x4004E03C)) +#define WTIMER4_TAPMR_R (*((volatile uint32_t *)0x4004E040)) +#define WTIMER4_TBPMR_R (*((volatile uint32_t *)0x4004E044)) +#define WTIMER4_TAR_R (*((volatile uint32_t *)0x4004E048)) +#define WTIMER4_TBR_R (*((volatile uint32_t *)0x4004E04C)) +#define WTIMER4_TAV_R (*((volatile uint32_t *)0x4004E050)) +#define WTIMER4_TBV_R (*((volatile uint32_t *)0x4004E054)) +#define WTIMER4_RTCPD_R (*((volatile uint32_t *)0x4004E058)) +#define WTIMER4_TAPS_R (*((volatile uint32_t *)0x4004E05C)) +#define WTIMER4_TBPS_R (*((volatile uint32_t *)0x4004E060)) +#define WTIMER4_TAPV_R (*((volatile uint32_t *)0x4004E064)) +#define WTIMER4_TBPV_R (*((volatile uint32_t *)0x4004E068)) +#define WTIMER4_PP_R (*((volatile uint32_t *)0x4004EFC0)) + +//***************************************************************************** +// +// Timer registers (WTIMER5) +// +//***************************************************************************** +#define WTIMER5_CFG_R (*((volatile uint32_t *)0x4004F000)) +#define WTIMER5_TAMR_R (*((volatile uint32_t *)0x4004F004)) +#define WTIMER5_TBMR_R (*((volatile uint32_t *)0x4004F008)) +#define WTIMER5_CTL_R (*((volatile uint32_t *)0x4004F00C)) +#define WTIMER5_SYNC_R (*((volatile uint32_t *)0x4004F010)) +#define WTIMER5_IMR_R (*((volatile uint32_t *)0x4004F018)) +#define WTIMER5_RIS_R (*((volatile uint32_t *)0x4004F01C)) +#define WTIMER5_MIS_R (*((volatile uint32_t *)0x4004F020)) +#define WTIMER5_ICR_R (*((volatile uint32_t *)0x4004F024)) +#define WTIMER5_TAILR_R (*((volatile uint32_t *)0x4004F028)) +#define WTIMER5_TBILR_R (*((volatile uint32_t *)0x4004F02C)) +#define WTIMER5_TAMATCHR_R (*((volatile uint32_t *)0x4004F030)) +#define WTIMER5_TBMATCHR_R (*((volatile uint32_t *)0x4004F034)) +#define WTIMER5_TAPR_R (*((volatile uint32_t *)0x4004F038)) +#define WTIMER5_TBPR_R (*((volatile uint32_t *)0x4004F03C)) +#define WTIMER5_TAPMR_R (*((volatile uint32_t *)0x4004F040)) +#define WTIMER5_TBPMR_R (*((volatile uint32_t *)0x4004F044)) +#define WTIMER5_TAR_R (*((volatile uint32_t *)0x4004F048)) +#define WTIMER5_TBR_R (*((volatile uint32_t *)0x4004F04C)) +#define WTIMER5_TAV_R (*((volatile uint32_t *)0x4004F050)) +#define WTIMER5_TBV_R (*((volatile uint32_t *)0x4004F054)) +#define WTIMER5_RTCPD_R (*((volatile uint32_t *)0x4004F058)) +#define WTIMER5_TAPS_R (*((volatile uint32_t *)0x4004F05C)) +#define WTIMER5_TBPS_R (*((volatile uint32_t *)0x4004F060)) +#define WTIMER5_TAPV_R (*((volatile uint32_t *)0x4004F064)) +#define WTIMER5_TBPV_R (*((volatile uint32_t *)0x4004F068)) +#define WTIMER5_PP_R (*((volatile uint32_t *)0x4004FFC0)) + +//***************************************************************************** +// +// Univeral Serial Bus registers (USB0) +// +//***************************************************************************** +#define USB0_FADDR_R (*((volatile uint8_t *)0x40050000)) +#define USB0_POWER_R (*((volatile uint8_t *)0x40050001)) +#define USB0_TXIS_R (*((volatile uint16_t *)0x40050002)) +#define USB0_RXIS_R (*((volatile uint16_t *)0x40050004)) +#define USB0_TXIE_R (*((volatile uint16_t *)0x40050006)) +#define USB0_RXIE_R (*((volatile uint16_t *)0x40050008)) +#define USB0_IS_R (*((volatile uint8_t *)0x4005000A)) +#define USB0_IE_R (*((volatile uint8_t *)0x4005000B)) +#define USB0_FRAME_R (*((volatile uint16_t *)0x4005000C)) +#define USB0_EPIDX_R (*((volatile uint8_t *)0x4005000E)) +#define USB0_TEST_R (*((volatile uint8_t *)0x4005000F)) +#define USB0_FIFO0_R (*((volatile uint32_t *)0x40050020)) +#define USB0_FIFO1_R (*((volatile uint32_t *)0x40050024)) +#define USB0_FIFO2_R (*((volatile uint32_t *)0x40050028)) +#define USB0_FIFO3_R (*((volatile uint32_t *)0x4005002C)) +#define USB0_FIFO4_R (*((volatile uint32_t *)0x40050030)) +#define USB0_FIFO5_R (*((volatile uint32_t *)0x40050034)) +#define USB0_FIFO6_R (*((volatile uint32_t *)0x40050038)) +#define USB0_FIFO7_R (*((volatile uint32_t *)0x4005003C)) +#define USB0_DEVCTL_R (*((volatile uint8_t *)0x40050060)) +#define USB0_TXFIFOSZ_R (*((volatile uint8_t *)0x40050062)) +#define USB0_RXFIFOSZ_R (*((volatile uint8_t *)0x40050063)) +#define USB0_TXFIFOADD_R (*((volatile uint16_t *)0x40050064)) +#define USB0_RXFIFOADD_R (*((volatile uint16_t *)0x40050066)) +#define USB0_CONTIM_R (*((volatile uint8_t *)0x4005007A)) +#define USB0_VPLEN_R (*((volatile uint8_t *)0x4005007B)) +#define USB0_FSEOF_R (*((volatile uint8_t *)0x4005007D)) +#define USB0_LSEOF_R (*((volatile uint8_t *)0x4005007E)) +#define USB0_TXFUNCADDR0_R (*((volatile uint8_t *)0x40050080)) +#define USB0_TXHUBADDR0_R (*((volatile uint8_t *)0x40050082)) +#define USB0_TXHUBPORT0_R (*((volatile uint8_t *)0x40050083)) +#define USB0_TXFUNCADDR1_R (*((volatile uint8_t *)0x40050088)) +#define USB0_TXHUBADDR1_R (*((volatile uint8_t *)0x4005008A)) +#define USB0_TXHUBPORT1_R (*((volatile uint8_t *)0x4005008B)) +#define USB0_RXFUNCADDR1_R (*((volatile uint8_t *)0x4005008C)) +#define USB0_RXHUBADDR1_R (*((volatile uint8_t *)0x4005008E)) +#define USB0_RXHUBPORT1_R (*((volatile uint8_t *)0x4005008F)) +#define USB0_TXFUNCADDR2_R (*((volatile uint8_t *)0x40050090)) +#define USB0_TXHUBADDR2_R (*((volatile uint8_t *)0x40050092)) +#define USB0_TXHUBPORT2_R (*((volatile uint8_t *)0x40050093)) +#define USB0_RXFUNCADDR2_R (*((volatile uint8_t *)0x40050094)) +#define USB0_RXHUBADDR2_R (*((volatile uint8_t *)0x40050096)) +#define USB0_RXHUBPORT2_R (*((volatile uint8_t *)0x40050097)) +#define USB0_TXFUNCADDR3_R (*((volatile uint8_t *)0x40050098)) +#define USB0_TXHUBADDR3_R (*((volatile uint8_t *)0x4005009A)) +#define USB0_TXHUBPORT3_R (*((volatile uint8_t *)0x4005009B)) +#define USB0_RXFUNCADDR3_R (*((volatile uint8_t *)0x4005009C)) +#define USB0_RXHUBADDR3_R (*((volatile uint8_t *)0x4005009E)) +#define USB0_RXHUBPORT3_R (*((volatile uint8_t *)0x4005009F)) +#define USB0_TXFUNCADDR4_R (*((volatile uint8_t *)0x400500A0)) +#define USB0_TXHUBADDR4_R (*((volatile uint8_t *)0x400500A2)) +#define USB0_TXHUBPORT4_R (*((volatile uint8_t *)0x400500A3)) +#define USB0_RXFUNCADDR4_R (*((volatile uint8_t *)0x400500A4)) +#define USB0_RXHUBADDR4_R (*((volatile uint8_t *)0x400500A6)) +#define USB0_RXHUBPORT4_R (*((volatile uint8_t *)0x400500A7)) +#define USB0_TXFUNCADDR5_R (*((volatile uint8_t *)0x400500A8)) +#define USB0_TXHUBADDR5_R (*((volatile uint8_t *)0x400500AA)) +#define USB0_TXHUBPORT5_R (*((volatile uint8_t *)0x400500AB)) +#define USB0_RXFUNCADDR5_R (*((volatile uint8_t *)0x400500AC)) +#define USB0_RXHUBADDR5_R (*((volatile uint8_t *)0x400500AE)) +#define USB0_RXHUBPORT5_R (*((volatile uint8_t *)0x400500AF)) +#define USB0_TXFUNCADDR6_R (*((volatile uint8_t *)0x400500B0)) +#define USB0_TXHUBADDR6_R (*((volatile uint8_t *)0x400500B2)) +#define USB0_TXHUBPORT6_R (*((volatile uint8_t *)0x400500B3)) +#define USB0_RXFUNCADDR6_R (*((volatile uint8_t *)0x400500B4)) +#define USB0_RXHUBADDR6_R (*((volatile uint8_t *)0x400500B6)) +#define USB0_RXHUBPORT6_R (*((volatile uint8_t *)0x400500B7)) +#define USB0_TXFUNCADDR7_R (*((volatile uint8_t *)0x400500B8)) +#define USB0_TXHUBADDR7_R (*((volatile uint8_t *)0x400500BA)) +#define USB0_TXHUBPORT7_R (*((volatile uint8_t *)0x400500BB)) +#define USB0_RXFUNCADDR7_R (*((volatile uint8_t *)0x400500BC)) +#define USB0_RXHUBADDR7_R (*((volatile uint8_t *)0x400500BE)) +#define USB0_RXHUBPORT7_R (*((volatile uint8_t *)0x400500BF)) +#define USB0_CSRL0_R (*((volatile uint8_t *)0x40050102)) +#define USB0_CSRH0_R (*((volatile uint8_t *)0x40050103)) +#define USB0_COUNT0_R (*((volatile uint8_t *)0x40050108)) +#define USB0_TYPE0_R (*((volatile uint8_t *)0x4005010A)) +#define USB0_NAKLMT_R (*((volatile uint8_t *)0x4005010B)) +#define USB0_TXMAXP1_R (*((volatile uint16_t *)0x40050110)) +#define USB0_TXCSRL1_R (*((volatile uint8_t *)0x40050112)) +#define USB0_TXCSRH1_R (*((volatile uint8_t *)0x40050113)) +#define USB0_RXMAXP1_R (*((volatile uint16_t *)0x40050114)) +#define USB0_RXCSRL1_R (*((volatile uint8_t *)0x40050116)) +#define USB0_RXCSRH1_R (*((volatile uint8_t *)0x40050117)) +#define USB0_RXCOUNT1_R (*((volatile uint16_t *)0x40050118)) +#define USB0_TXTYPE1_R (*((volatile uint8_t *)0x4005011A)) +#define USB0_TXINTERVAL1_R (*((volatile uint8_t *)0x4005011B)) +#define USB0_RXTYPE1_R (*((volatile uint8_t *)0x4005011C)) +#define USB0_RXINTERVAL1_R (*((volatile uint8_t *)0x4005011D)) +#define USB0_TXMAXP2_R (*((volatile uint16_t *)0x40050120)) +#define USB0_TXCSRL2_R (*((volatile uint8_t *)0x40050122)) +#define USB0_TXCSRH2_R (*((volatile uint8_t *)0x40050123)) +#define USB0_RXMAXP2_R (*((volatile uint16_t *)0x40050124)) +#define USB0_RXCSRL2_R (*((volatile uint8_t *)0x40050126)) +#define USB0_RXCSRH2_R (*((volatile uint8_t *)0x40050127)) +#define USB0_RXCOUNT2_R (*((volatile uint16_t *)0x40050128)) +#define USB0_TXTYPE2_R (*((volatile uint8_t *)0x4005012A)) +#define USB0_TXINTERVAL2_R (*((volatile uint8_t *)0x4005012B)) +#define USB0_RXTYPE2_R (*((volatile uint8_t *)0x4005012C)) +#define USB0_RXINTERVAL2_R (*((volatile uint8_t *)0x4005012D)) +#define USB0_TXMAXP3_R (*((volatile uint16_t *)0x40050130)) +#define USB0_TXCSRL3_R (*((volatile uint8_t *)0x40050132)) +#define USB0_TXCSRH3_R (*((volatile uint8_t *)0x40050133)) +#define USB0_RXMAXP3_R (*((volatile uint16_t *)0x40050134)) +#define USB0_RXCSRL3_R (*((volatile uint8_t *)0x40050136)) +#define USB0_RXCSRH3_R (*((volatile uint8_t *)0x40050137)) +#define USB0_RXCOUNT3_R (*((volatile uint16_t *)0x40050138)) +#define USB0_TXTYPE3_R (*((volatile uint8_t *)0x4005013A)) +#define USB0_TXINTERVAL3_R (*((volatile uint8_t *)0x4005013B)) +#define USB0_RXTYPE3_R (*((volatile uint8_t *)0x4005013C)) +#define USB0_RXINTERVAL3_R (*((volatile uint8_t *)0x4005013D)) +#define USB0_TXMAXP4_R (*((volatile uint16_t *)0x40050140)) +#define USB0_TXCSRL4_R (*((volatile uint8_t *)0x40050142)) +#define USB0_TXCSRH4_R (*((volatile uint8_t *)0x40050143)) +#define USB0_RXMAXP4_R (*((volatile uint16_t *)0x40050144)) +#define USB0_RXCSRL4_R (*((volatile uint8_t *)0x40050146)) +#define USB0_RXCSRH4_R (*((volatile uint8_t *)0x40050147)) +#define USB0_RXCOUNT4_R (*((volatile uint16_t *)0x40050148)) +#define USB0_TXTYPE4_R (*((volatile uint8_t *)0x4005014A)) +#define USB0_TXINTERVAL4_R (*((volatile uint8_t *)0x4005014B)) +#define USB0_RXTYPE4_R (*((volatile uint8_t *)0x4005014C)) +#define USB0_RXINTERVAL4_R (*((volatile uint8_t *)0x4005014D)) +#define USB0_TXMAXP5_R (*((volatile uint16_t *)0x40050150)) +#define USB0_TXCSRL5_R (*((volatile uint8_t *)0x40050152)) +#define USB0_TXCSRH5_R (*((volatile uint8_t *)0x40050153)) +#define USB0_RXMAXP5_R (*((volatile uint16_t *)0x40050154)) +#define USB0_RXCSRL5_R (*((volatile uint8_t *)0x40050156)) +#define USB0_RXCSRH5_R (*((volatile uint8_t *)0x40050157)) +#define USB0_RXCOUNT5_R (*((volatile uint16_t *)0x40050158)) +#define USB0_TXTYPE5_R (*((volatile uint8_t *)0x4005015A)) +#define USB0_TXINTERVAL5_R (*((volatile uint8_t *)0x4005015B)) +#define USB0_RXTYPE5_R (*((volatile uint8_t *)0x4005015C)) +#define USB0_RXINTERVAL5_R (*((volatile uint8_t *)0x4005015D)) +#define USB0_TXMAXP6_R (*((volatile uint16_t *)0x40050160)) +#define USB0_TXCSRL6_R (*((volatile uint8_t *)0x40050162)) +#define USB0_TXCSRH6_R (*((volatile uint8_t *)0x40050163)) +#define USB0_RXMAXP6_R (*((volatile uint16_t *)0x40050164)) +#define USB0_RXCSRL6_R (*((volatile uint8_t *)0x40050166)) +#define USB0_RXCSRH6_R (*((volatile uint8_t *)0x40050167)) +#define USB0_RXCOUNT6_R (*((volatile uint16_t *)0x40050168)) +#define USB0_TXTYPE6_R (*((volatile uint8_t *)0x4005016A)) +#define USB0_TXINTERVAL6_R (*((volatile uint8_t *)0x4005016B)) +#define USB0_RXTYPE6_R (*((volatile uint8_t *)0x4005016C)) +#define USB0_RXINTERVAL6_R (*((volatile uint8_t *)0x4005016D)) +#define USB0_TXMAXP7_R (*((volatile uint16_t *)0x40050170)) +#define USB0_TXCSRL7_R (*((volatile uint8_t *)0x40050172)) +#define USB0_TXCSRH7_R (*((volatile uint8_t *)0x40050173)) +#define USB0_RXMAXP7_R (*((volatile uint16_t *)0x40050174)) +#define USB0_RXCSRL7_R (*((volatile uint8_t *)0x40050176)) +#define USB0_RXCSRH7_R (*((volatile uint8_t *)0x40050177)) +#define USB0_RXCOUNT7_R (*((volatile uint16_t *)0x40050178)) +#define USB0_TXTYPE7_R (*((volatile uint8_t *)0x4005017A)) +#define USB0_TXINTERVAL7_R (*((volatile uint8_t *)0x4005017B)) +#define USB0_RXTYPE7_R (*((volatile uint8_t *)0x4005017C)) +#define USB0_RXINTERVAL7_R (*((volatile uint8_t *)0x4005017D)) +#define USB0_RQPKTCOUNT1_R (*((volatile uint16_t *)0x40050304)) +#define USB0_RQPKTCOUNT2_R (*((volatile uint16_t *)0x40050308)) +#define USB0_RQPKTCOUNT3_R (*((volatile uint16_t *)0x4005030C)) +#define USB0_RQPKTCOUNT4_R (*((volatile uint16_t *)0x40050310)) +#define USB0_RQPKTCOUNT5_R (*((volatile uint16_t *)0x40050314)) +#define USB0_RQPKTCOUNT6_R (*((volatile uint16_t *)0x40050318)) +#define USB0_RQPKTCOUNT7_R (*((volatile uint16_t *)0x4005031C)) +#define USB0_RXDPKTBUFDIS_R (*((volatile uint16_t *)0x40050340)) +#define USB0_TXDPKTBUFDIS_R (*((volatile uint16_t *)0x40050342)) +#define USB0_EPC_R (*((volatile uint32_t *)0x40050400)) +#define USB0_EPCRIS_R (*((volatile uint32_t *)0x40050404)) +#define USB0_EPCIM_R (*((volatile uint32_t *)0x40050408)) +#define USB0_EPCISC_R (*((volatile uint32_t *)0x4005040C)) +#define USB0_DRRIS_R (*((volatile uint32_t *)0x40050410)) +#define USB0_DRIM_R (*((volatile uint32_t *)0x40050414)) +#define USB0_DRISC_R (*((volatile uint32_t *)0x40050418)) +#define USB0_GPCS_R (*((volatile uint32_t *)0x4005041C)) +#define USB0_VDC_R (*((volatile uint32_t *)0x40050430)) +#define USB0_VDCRIS_R (*((volatile uint32_t *)0x40050434)) +#define USB0_VDCIM_R (*((volatile uint32_t *)0x40050438)) +#define USB0_VDCISC_R (*((volatile uint32_t *)0x4005043C)) +#define USB0_IDVRIS_R (*((volatile uint32_t *)0x40050444)) +#define USB0_IDVIM_R (*((volatile uint32_t *)0x40050448)) +#define USB0_IDVISC_R (*((volatile uint32_t *)0x4005044C)) +#define USB0_DMASEL_R (*((volatile uint32_t *)0x40050450)) +#define USB0_PP_R (*((volatile uint32_t *)0x40050FC0)) + +//***************************************************************************** +// +// GPIO registers (PORTA AHB) +// +//***************************************************************************** +#define GPIO_PORTA_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x40058000) +#define GPIO_PORTA_AHB_DATA_R (*((volatile uint32_t *)0x400583FC)) +#define GPIO_PORTA_AHB_DIR_R (*((volatile uint32_t *)0x40058400)) +#define GPIO_PORTA_AHB_IS_R (*((volatile uint32_t *)0x40058404)) +#define GPIO_PORTA_AHB_IBE_R (*((volatile uint32_t *)0x40058408)) +#define GPIO_PORTA_AHB_IEV_R (*((volatile uint32_t *)0x4005840C)) +#define GPIO_PORTA_AHB_IM_R (*((volatile uint32_t *)0x40058410)) +#define GPIO_PORTA_AHB_RIS_R (*((volatile uint32_t *)0x40058414)) +#define GPIO_PORTA_AHB_MIS_R (*((volatile uint32_t *)0x40058418)) +#define GPIO_PORTA_AHB_ICR_R (*((volatile uint32_t *)0x4005841C)) +#define GPIO_PORTA_AHB_AFSEL_R (*((volatile uint32_t *)0x40058420)) +#define GPIO_PORTA_AHB_DR2R_R (*((volatile uint32_t *)0x40058500)) +#define GPIO_PORTA_AHB_DR4R_R (*((volatile uint32_t *)0x40058504)) +#define GPIO_PORTA_AHB_DR8R_R (*((volatile uint32_t *)0x40058508)) +#define GPIO_PORTA_AHB_ODR_R (*((volatile uint32_t *)0x4005850C)) +#define GPIO_PORTA_AHB_PUR_R (*((volatile uint32_t *)0x40058510)) +#define GPIO_PORTA_AHB_PDR_R (*((volatile uint32_t *)0x40058514)) +#define GPIO_PORTA_AHB_SLR_R (*((volatile uint32_t *)0x40058518)) +#define GPIO_PORTA_AHB_DEN_R (*((volatile uint32_t *)0x4005851C)) +#define GPIO_PORTA_AHB_LOCK_R (*((volatile uint32_t *)0x40058520)) +#define GPIO_PORTA_AHB_CR_R (*((volatile uint32_t *)0x40058524)) +#define GPIO_PORTA_AHB_AMSEL_R (*((volatile uint32_t *)0x40058528)) +#define GPIO_PORTA_AHB_PCTL_R (*((volatile uint32_t *)0x4005852C)) +#define GPIO_PORTA_AHB_ADCCTL_R (*((volatile uint32_t *)0x40058530)) +#define GPIO_PORTA_AHB_DMACTL_R (*((volatile uint32_t *)0x40058534)) + +//***************************************************************************** +// +// GPIO registers (PORTB AHB) +// +//***************************************************************************** +#define GPIO_PORTB_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x40059000) +#define GPIO_PORTB_AHB_DATA_R (*((volatile uint32_t *)0x400593FC)) +#define GPIO_PORTB_AHB_DIR_R (*((volatile uint32_t *)0x40059400)) +#define GPIO_PORTB_AHB_IS_R (*((volatile uint32_t *)0x40059404)) +#define GPIO_PORTB_AHB_IBE_R (*((volatile uint32_t *)0x40059408)) +#define GPIO_PORTB_AHB_IEV_R (*((volatile uint32_t *)0x4005940C)) +#define GPIO_PORTB_AHB_IM_R (*((volatile uint32_t *)0x40059410)) +#define GPIO_PORTB_AHB_RIS_R (*((volatile uint32_t *)0x40059414)) +#define GPIO_PORTB_AHB_MIS_R (*((volatile uint32_t *)0x40059418)) +#define GPIO_PORTB_AHB_ICR_R (*((volatile uint32_t *)0x4005941C)) +#define GPIO_PORTB_AHB_AFSEL_R (*((volatile uint32_t *)0x40059420)) +#define GPIO_PORTB_AHB_DR2R_R (*((volatile uint32_t *)0x40059500)) +#define GPIO_PORTB_AHB_DR4R_R (*((volatile uint32_t *)0x40059504)) +#define GPIO_PORTB_AHB_DR8R_R (*((volatile uint32_t *)0x40059508)) +#define GPIO_PORTB_AHB_ODR_R (*((volatile uint32_t *)0x4005950C)) +#define GPIO_PORTB_AHB_PUR_R (*((volatile uint32_t *)0x40059510)) +#define GPIO_PORTB_AHB_PDR_R (*((volatile uint32_t *)0x40059514)) +#define GPIO_PORTB_AHB_SLR_R (*((volatile uint32_t *)0x40059518)) +#define GPIO_PORTB_AHB_DEN_R (*((volatile uint32_t *)0x4005951C)) +#define GPIO_PORTB_AHB_LOCK_R (*((volatile uint32_t *)0x40059520)) +#define GPIO_PORTB_AHB_CR_R (*((volatile uint32_t *)0x40059524)) +#define GPIO_PORTB_AHB_AMSEL_R (*((volatile uint32_t *)0x40059528)) +#define GPIO_PORTB_AHB_PCTL_R (*((volatile uint32_t *)0x4005952C)) +#define GPIO_PORTB_AHB_ADCCTL_R (*((volatile uint32_t *)0x40059530)) +#define GPIO_PORTB_AHB_DMACTL_R (*((volatile uint32_t *)0x40059534)) + +//***************************************************************************** +// +// GPIO registers (PORTC AHB) +// +//***************************************************************************** +#define GPIO_PORTC_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x4005A000) +#define GPIO_PORTC_AHB_DATA_R (*((volatile uint32_t *)0x4005A3FC)) +#define GPIO_PORTC_AHB_DIR_R (*((volatile uint32_t *)0x4005A400)) +#define GPIO_PORTC_AHB_IS_R (*((volatile uint32_t *)0x4005A404)) +#define GPIO_PORTC_AHB_IBE_R (*((volatile uint32_t *)0x4005A408)) +#define GPIO_PORTC_AHB_IEV_R (*((volatile uint32_t *)0x4005A40C)) +#define GPIO_PORTC_AHB_IM_R (*((volatile uint32_t *)0x4005A410)) +#define GPIO_PORTC_AHB_RIS_R (*((volatile uint32_t *)0x4005A414)) +#define GPIO_PORTC_AHB_MIS_R (*((volatile uint32_t *)0x4005A418)) +#define GPIO_PORTC_AHB_ICR_R (*((volatile uint32_t *)0x4005A41C)) +#define GPIO_PORTC_AHB_AFSEL_R (*((volatile uint32_t *)0x4005A420)) +#define GPIO_PORTC_AHB_DR2R_R (*((volatile uint32_t *)0x4005A500)) +#define GPIO_PORTC_AHB_DR4R_R (*((volatile uint32_t *)0x4005A504)) +#define GPIO_PORTC_AHB_DR8R_R (*((volatile uint32_t *)0x4005A508)) +#define GPIO_PORTC_AHB_ODR_R (*((volatile uint32_t *)0x4005A50C)) +#define GPIO_PORTC_AHB_PUR_R (*((volatile uint32_t *)0x4005A510)) +#define GPIO_PORTC_AHB_PDR_R (*((volatile uint32_t *)0x4005A514)) +#define GPIO_PORTC_AHB_SLR_R (*((volatile uint32_t *)0x4005A518)) +#define GPIO_PORTC_AHB_DEN_R (*((volatile uint32_t *)0x4005A51C)) +#define GPIO_PORTC_AHB_LOCK_R (*((volatile uint32_t *)0x4005A520)) +#define GPIO_PORTC_AHB_CR_R (*((volatile uint32_t *)0x4005A524)) +#define GPIO_PORTC_AHB_AMSEL_R (*((volatile uint32_t *)0x4005A528)) +#define GPIO_PORTC_AHB_PCTL_R (*((volatile uint32_t *)0x4005A52C)) +#define GPIO_PORTC_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005A530)) +#define GPIO_PORTC_AHB_DMACTL_R (*((volatile uint32_t *)0x4005A534)) + +//***************************************************************************** +// +// GPIO registers (PORTD AHB) +// +//***************************************************************************** +#define GPIO_PORTD_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x4005B000) +#define GPIO_PORTD_AHB_DATA_R (*((volatile uint32_t *)0x4005B3FC)) +#define GPIO_PORTD_AHB_DIR_R (*((volatile uint32_t *)0x4005B400)) +#define GPIO_PORTD_AHB_IS_R (*((volatile uint32_t *)0x4005B404)) +#define GPIO_PORTD_AHB_IBE_R (*((volatile uint32_t *)0x4005B408)) +#define GPIO_PORTD_AHB_IEV_R (*((volatile uint32_t *)0x4005B40C)) +#define GPIO_PORTD_AHB_IM_R (*((volatile uint32_t *)0x4005B410)) +#define GPIO_PORTD_AHB_RIS_R (*((volatile uint32_t *)0x4005B414)) +#define GPIO_PORTD_AHB_MIS_R (*((volatile uint32_t *)0x4005B418)) +#define GPIO_PORTD_AHB_ICR_R (*((volatile uint32_t *)0x4005B41C)) +#define GPIO_PORTD_AHB_AFSEL_R (*((volatile uint32_t *)0x4005B420)) +#define GPIO_PORTD_AHB_DR2R_R (*((volatile uint32_t *)0x4005B500)) +#define GPIO_PORTD_AHB_DR4R_R (*((volatile uint32_t *)0x4005B504)) +#define GPIO_PORTD_AHB_DR8R_R (*((volatile uint32_t *)0x4005B508)) +#define GPIO_PORTD_AHB_ODR_R (*((volatile uint32_t *)0x4005B50C)) +#define GPIO_PORTD_AHB_PUR_R (*((volatile uint32_t *)0x4005B510)) +#define GPIO_PORTD_AHB_PDR_R (*((volatile uint32_t *)0x4005B514)) +#define GPIO_PORTD_AHB_SLR_R (*((volatile uint32_t *)0x4005B518)) +#define GPIO_PORTD_AHB_DEN_R (*((volatile uint32_t *)0x4005B51C)) +#define GPIO_PORTD_AHB_LOCK_R (*((volatile uint32_t *)0x4005B520)) +#define GPIO_PORTD_AHB_CR_R (*((volatile uint32_t *)0x4005B524)) +#define GPIO_PORTD_AHB_AMSEL_R (*((volatile uint32_t *)0x4005B528)) +#define GPIO_PORTD_AHB_PCTL_R (*((volatile uint32_t *)0x4005B52C)) +#define GPIO_PORTD_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005B530)) +#define GPIO_PORTD_AHB_DMACTL_R (*((volatile uint32_t *)0x4005B534)) + +//***************************************************************************** +// +// GPIO registers (PORTE AHB) +// +//***************************************************************************** +#define GPIO_PORTE_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x4005C000) +#define GPIO_PORTE_AHB_DATA_R (*((volatile uint32_t *)0x4005C3FC)) +#define GPIO_PORTE_AHB_DIR_R (*((volatile uint32_t *)0x4005C400)) +#define GPIO_PORTE_AHB_IS_R (*((volatile uint32_t *)0x4005C404)) +#define GPIO_PORTE_AHB_IBE_R (*((volatile uint32_t *)0x4005C408)) +#define GPIO_PORTE_AHB_IEV_R (*((volatile uint32_t *)0x4005C40C)) +#define GPIO_PORTE_AHB_IM_R (*((volatile uint32_t *)0x4005C410)) +#define GPIO_PORTE_AHB_RIS_R (*((volatile uint32_t *)0x4005C414)) +#define GPIO_PORTE_AHB_MIS_R (*((volatile uint32_t *)0x4005C418)) +#define GPIO_PORTE_AHB_ICR_R (*((volatile uint32_t *)0x4005C41C)) +#define GPIO_PORTE_AHB_AFSEL_R (*((volatile uint32_t *)0x4005C420)) +#define GPIO_PORTE_AHB_DR2R_R (*((volatile uint32_t *)0x4005C500)) +#define GPIO_PORTE_AHB_DR4R_R (*((volatile uint32_t *)0x4005C504)) +#define GPIO_PORTE_AHB_DR8R_R (*((volatile uint32_t *)0x4005C508)) +#define GPIO_PORTE_AHB_ODR_R (*((volatile uint32_t *)0x4005C50C)) +#define GPIO_PORTE_AHB_PUR_R (*((volatile uint32_t *)0x4005C510)) +#define GPIO_PORTE_AHB_PDR_R (*((volatile uint32_t *)0x4005C514)) +#define GPIO_PORTE_AHB_SLR_R (*((volatile uint32_t *)0x4005C518)) +#define GPIO_PORTE_AHB_DEN_R (*((volatile uint32_t *)0x4005C51C)) +#define GPIO_PORTE_AHB_LOCK_R (*((volatile uint32_t *)0x4005C520)) +#define GPIO_PORTE_AHB_CR_R (*((volatile uint32_t *)0x4005C524)) +#define GPIO_PORTE_AHB_AMSEL_R (*((volatile uint32_t *)0x4005C528)) +#define GPIO_PORTE_AHB_PCTL_R (*((volatile uint32_t *)0x4005C52C)) +#define GPIO_PORTE_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005C530)) +#define GPIO_PORTE_AHB_DMACTL_R (*((volatile uint32_t *)0x4005C534)) + +//***************************************************************************** +// +// GPIO registers (PORTF AHB) +// +//***************************************************************************** +#define GPIO_PORTF_AHB_DATA_BITS_R \ + ((volatile uint32_t *)0x4005D000) +#define GPIO_PORTF_AHB_DATA_R (*((volatile uint32_t *)0x4005D3FC)) +#define GPIO_PORTF_AHB_DIR_R (*((volatile uint32_t *)0x4005D400)) +#define GPIO_PORTF_AHB_IS_R (*((volatile uint32_t *)0x4005D404)) +#define GPIO_PORTF_AHB_IBE_R (*((volatile uint32_t *)0x4005D408)) +#define GPIO_PORTF_AHB_IEV_R (*((volatile uint32_t *)0x4005D40C)) +#define GPIO_PORTF_AHB_IM_R (*((volatile uint32_t *)0x4005D410)) +#define GPIO_PORTF_AHB_RIS_R (*((volatile uint32_t *)0x4005D414)) +#define GPIO_PORTF_AHB_MIS_R (*((volatile uint32_t *)0x4005D418)) +#define GPIO_PORTF_AHB_ICR_R (*((volatile uint32_t *)0x4005D41C)) +#define GPIO_PORTF_AHB_AFSEL_R (*((volatile uint32_t *)0x4005D420)) +#define GPIO_PORTF_AHB_DR2R_R (*((volatile uint32_t *)0x4005D500)) +#define GPIO_PORTF_AHB_DR4R_R (*((volatile uint32_t *)0x4005D504)) +#define GPIO_PORTF_AHB_DR8R_R (*((volatile uint32_t *)0x4005D508)) +#define GPIO_PORTF_AHB_ODR_R (*((volatile uint32_t *)0x4005D50C)) +#define GPIO_PORTF_AHB_PUR_R (*((volatile uint32_t *)0x4005D510)) +#define GPIO_PORTF_AHB_PDR_R (*((volatile uint32_t *)0x4005D514)) +#define GPIO_PORTF_AHB_SLR_R (*((volatile uint32_t *)0x4005D518)) +#define GPIO_PORTF_AHB_DEN_R (*((volatile uint32_t *)0x4005D51C)) +#define GPIO_PORTF_AHB_LOCK_R (*((volatile uint32_t *)0x4005D520)) +#define GPIO_PORTF_AHB_CR_R (*((volatile uint32_t *)0x4005D524)) +#define GPIO_PORTF_AHB_AMSEL_R (*((volatile uint32_t *)0x4005D528)) +#define GPIO_PORTF_AHB_PCTL_R (*((volatile uint32_t *)0x4005D52C)) +#define GPIO_PORTF_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005D530)) +#define GPIO_PORTF_AHB_DMACTL_R (*((volatile uint32_t *)0x4005D534)) + +//***************************************************************************** +// +// EEPROM registers (EEPROM) +// +//***************************************************************************** +#define EEPROM_EESIZE_R (*((volatile uint32_t *)0x400AF000)) +#define EEPROM_EEBLOCK_R (*((volatile uint32_t *)0x400AF004)) +#define EEPROM_EEOFFSET_R (*((volatile uint32_t *)0x400AF008)) +#define EEPROM_EERDWR_R (*((volatile uint32_t *)0x400AF010)) +#define EEPROM_EERDWRINC_R (*((volatile uint32_t *)0x400AF014)) +#define EEPROM_EEDONE_R (*((volatile uint32_t *)0x400AF018)) +#define EEPROM_EESUPP_R (*((volatile uint32_t *)0x400AF01C)) +#define EEPROM_EEUNLOCK_R (*((volatile uint32_t *)0x400AF020)) +#define EEPROM_EEPROT_R (*((volatile uint32_t *)0x400AF030)) +#define EEPROM_EEPASS0_R (*((volatile uint32_t *)0x400AF034)) +#define EEPROM_EEPASS1_R (*((volatile uint32_t *)0x400AF038)) +#define EEPROM_EEPASS2_R (*((volatile uint32_t *)0x400AF03C)) +#define EEPROM_EEINT_R (*((volatile uint32_t *)0x400AF040)) +#define EEPROM_EEHIDE_R (*((volatile uint32_t *)0x400AF050)) +#define EEPROM_EEDBGME_R (*((volatile uint32_t *)0x400AF080)) +#define EEPROM_PP_R (*((volatile uint32_t *)0x400AFFC0)) + +//***************************************************************************** +// +// System Exception Module registers (SYSEXC) +// +//***************************************************************************** +#define SYSEXC_RIS_R (*((volatile uint32_t *)0x400F9000)) +#define SYSEXC_IM_R (*((volatile uint32_t *)0x400F9004)) +#define SYSEXC_MIS_R (*((volatile uint32_t *)0x400F9008)) +#define SYSEXC_IC_R (*((volatile uint32_t *)0x400F900C)) + +//***************************************************************************** +// +// Hibernation module registers (HIB) +// +//***************************************************************************** +#define HIB_RTCC_R (*((volatile uint32_t *)0x400FC000)) +#define HIB_RTCM0_R (*((volatile uint32_t *)0x400FC004)) +#define HIB_RTCLD_R (*((volatile uint32_t *)0x400FC00C)) +#define HIB_CTL_R (*((volatile uint32_t *)0x400FC010)) +#define HIB_IM_R (*((volatile uint32_t *)0x400FC014)) +#define HIB_RIS_R (*((volatile uint32_t *)0x400FC018)) +#define HIB_MIS_R (*((volatile uint32_t *)0x400FC01C)) +#define HIB_IC_R (*((volatile uint32_t *)0x400FC020)) +#define HIB_RTCT_R (*((volatile uint32_t *)0x400FC024)) +#define HIB_RTCSS_R (*((volatile uint32_t *)0x400FC028)) +#define HIB_DATA_R (*((volatile uint32_t *)0x400FC030)) + +//***************************************************************************** +// +// FLASH registers (FLASH CTRL) +// +//***************************************************************************** +#define FLASH_FMA_R (*((volatile uint32_t *)0x400FD000)) +#define FLASH_FMD_R (*((volatile uint32_t *)0x400FD004)) +#define FLASH_FMC_R (*((volatile uint32_t *)0x400FD008)) +#define FLASH_FCRIS_R (*((volatile uint32_t *)0x400FD00C)) +#define FLASH_FCIM_R (*((volatile uint32_t *)0x400FD010)) +#define FLASH_FCMISC_R (*((volatile uint32_t *)0x400FD014)) +#define FLASH_FMC2_R (*((volatile uint32_t *)0x400FD020)) +#define FLASH_FWBVAL_R (*((volatile uint32_t *)0x400FD030)) +#define FLASH_FWBN_R (*((volatile uint32_t *)0x400FD100)) +#define FLASH_FSIZE_R (*((volatile uint32_t *)0x400FDFC0)) +#define FLASH_SSIZE_R (*((volatile uint32_t *)0x400FDFC4)) +#define FLASH_ROMSWMAP_R (*((volatile uint32_t *)0x400FDFCC)) +#define FLASH_RMCTL_R (*((volatile uint32_t *)0x400FE0F0)) +#define FLASH_BOOTCFG_R (*((volatile uint32_t *)0x400FE1D0)) +#define FLASH_USERREG0_R (*((volatile uint32_t *)0x400FE1E0)) +#define FLASH_USERREG1_R (*((volatile uint32_t *)0x400FE1E4)) +#define FLASH_USERREG2_R (*((volatile uint32_t *)0x400FE1E8)) +#define FLASH_USERREG3_R (*((volatile uint32_t *)0x400FE1EC)) +#define FLASH_FMPRE0_R (*((volatile uint32_t *)0x400FE200)) +#define FLASH_FMPRE1_R (*((volatile uint32_t *)0x400FE204)) +#define FLASH_FMPRE2_R (*((volatile uint32_t *)0x400FE208)) +#define FLASH_FMPRE3_R (*((volatile uint32_t *)0x400FE20C)) +#define FLASH_FMPPE0_R (*((volatile uint32_t *)0x400FE400)) +#define FLASH_FMPPE1_R (*((volatile uint32_t *)0x400FE404)) +#define FLASH_FMPPE2_R (*((volatile uint32_t *)0x400FE408)) +#define FLASH_FMPPE3_R (*((volatile uint32_t *)0x400FE40C)) + +//***************************************************************************** +// +// System Control registers (SYSCTL) +// +//***************************************************************************** +#define SYSCTL_DID0_R (*((volatile uint32_t *)0x400FE000)) +#define SYSCTL_DID1_R (*((volatile uint32_t *)0x400FE004)) +#define SYSCTL_DC0_R (*((volatile uint32_t *)0x400FE008)) +#define SYSCTL_DC1_R (*((volatile uint32_t *)0x400FE010)) +#define SYSCTL_DC2_R (*((volatile uint32_t *)0x400FE014)) +#define SYSCTL_DC3_R (*((volatile uint32_t *)0x400FE018)) +#define SYSCTL_DC4_R (*((volatile uint32_t *)0x400FE01C)) +#define SYSCTL_DC5_R (*((volatile uint32_t *)0x400FE020)) +#define SYSCTL_DC6_R (*((volatile uint32_t *)0x400FE024)) +#define SYSCTL_DC7_R (*((volatile uint32_t *)0x400FE028)) +#define SYSCTL_DC8_R (*((volatile uint32_t *)0x400FE02C)) +#define SYSCTL_PBORCTL_R (*((volatile uint32_t *)0x400FE030)) +#define SYSCTL_SRCR0_R (*((volatile uint32_t *)0x400FE040)) +#define SYSCTL_SRCR1_R (*((volatile uint32_t *)0x400FE044)) +#define SYSCTL_SRCR2_R (*((volatile uint32_t *)0x400FE048)) +#define SYSCTL_RIS_R (*((volatile uint32_t *)0x400FE050)) +#define SYSCTL_IMC_R (*((volatile uint32_t *)0x400FE054)) +#define SYSCTL_MISC_R (*((volatile uint32_t *)0x400FE058)) +#define SYSCTL_RESC_R (*((volatile uint32_t *)0x400FE05C)) +#define SYSCTL_RCC_R (*((volatile uint32_t *)0x400FE060)) +#define SYSCTL_GPIOHBCTL_R (*((volatile uint32_t *)0x400FE06C)) +#define SYSCTL_RCC2_R (*((volatile uint32_t *)0x400FE070)) +#define SYSCTL_MOSCCTL_R (*((volatile uint32_t *)0x400FE07C)) +#define SYSCTL_RCGC0_R (*((volatile uint32_t *)0x400FE100)) +#define SYSCTL_RCGC1_R (*((volatile uint32_t *)0x400FE104)) +#define SYSCTL_RCGC2_R (*((volatile uint32_t *)0x400FE108)) +#define SYSCTL_SCGC0_R (*((volatile uint32_t *)0x400FE110)) +#define SYSCTL_SCGC1_R (*((volatile uint32_t *)0x400FE114)) +#define SYSCTL_SCGC2_R (*((volatile uint32_t *)0x400FE118)) +#define SYSCTL_DCGC0_R (*((volatile uint32_t *)0x400FE120)) +#define SYSCTL_DCGC1_R (*((volatile uint32_t *)0x400FE124)) +#define SYSCTL_DCGC2_R (*((volatile uint32_t *)0x400FE128)) +#define SYSCTL_DSLPCLKCFG_R (*((volatile uint32_t *)0x400FE144)) +#define SYSCTL_SYSPROP_R (*((volatile uint32_t *)0x400FE14C)) +#define SYSCTL_PIOSCCAL_R (*((volatile uint32_t *)0x400FE150)) +#define SYSCTL_PIOSCSTAT_R (*((volatile uint32_t *)0x400FE154)) +#define SYSCTL_PLLFREQ0_R (*((volatile uint32_t *)0x400FE160)) +#define SYSCTL_PLLFREQ1_R (*((volatile uint32_t *)0x400FE164)) +#define SYSCTL_PLLSTAT_R (*((volatile uint32_t *)0x400FE168)) +#define SYSCTL_SLPPWRCFG_R (*((volatile uint32_t *)0x400FE188)) +#define SYSCTL_DSLPPWRCFG_R (*((volatile uint32_t *)0x400FE18C)) +#define SYSCTL_DC9_R (*((volatile uint32_t *)0x400FE190)) +#define SYSCTL_NVMSTAT_R (*((volatile uint32_t *)0x400FE1A0)) +#define SYSCTL_LDOSPCTL_R (*((volatile uint32_t *)0x400FE1B4)) +#define SYSCTL_LDODPCTL_R (*((volatile uint32_t *)0x400FE1BC)) +#define SYSCTL_PPWD_R (*((volatile uint32_t *)0x400FE300)) +#define SYSCTL_PPTIMER_R (*((volatile uint32_t *)0x400FE304)) +#define SYSCTL_PPGPIO_R (*((volatile uint32_t *)0x400FE308)) +#define SYSCTL_PPDMA_R (*((volatile uint32_t *)0x400FE30C)) +#define SYSCTL_PPHIB_R (*((volatile uint32_t *)0x400FE314)) +#define SYSCTL_PPUART_R (*((volatile uint32_t *)0x400FE318)) +#define SYSCTL_PPSSI_R (*((volatile uint32_t *)0x400FE31C)) +#define SYSCTL_PPI2C_R (*((volatile uint32_t *)0x400FE320)) +#define SYSCTL_PPUSB_R (*((volatile uint32_t *)0x400FE328)) +#define SYSCTL_PPCAN_R (*((volatile uint32_t *)0x400FE334)) +#define SYSCTL_PPADC_R (*((volatile uint32_t *)0x400FE338)) +#define SYSCTL_PPACMP_R (*((volatile uint32_t *)0x400FE33C)) +#define SYSCTL_PPPWM_R (*((volatile uint32_t *)0x400FE340)) +#define SYSCTL_PPQEI_R (*((volatile uint32_t *)0x400FE344)) +#define SYSCTL_PPEEPROM_R (*((volatile uint32_t *)0x400FE358)) +#define SYSCTL_PPWTIMER_R (*((volatile uint32_t *)0x400FE35C)) +#define SYSCTL_SRWD_R (*((volatile uint32_t *)0x400FE500)) +#define SYSCTL_SRTIMER_R (*((volatile uint32_t *)0x400FE504)) +#define SYSCTL_SRGPIO_R (*((volatile uint32_t *)0x400FE508)) +#define SYSCTL_SRDMA_R (*((volatile uint32_t *)0x400FE50C)) +#define SYSCTL_SRHIB_R (*((volatile uint32_t *)0x400FE514)) +#define SYSCTL_SRUART_R (*((volatile uint32_t *)0x400FE518)) +#define SYSCTL_SRSSI_R (*((volatile uint32_t *)0x400FE51C)) +#define SYSCTL_SRI2C_R (*((volatile uint32_t *)0x400FE520)) +#define SYSCTL_SRUSB_R (*((volatile uint32_t *)0x400FE528)) +#define SYSCTL_SRCAN_R (*((volatile uint32_t *)0x400FE534)) +#define SYSCTL_SRADC_R (*((volatile uint32_t *)0x400FE538)) +#define SYSCTL_SRACMP_R (*((volatile uint32_t *)0x400FE53C)) +#define SYSCTL_SRPWM_R (*((volatile uint32_t *)0x400FE540)) +#define SYSCTL_SRQEI_R (*((volatile uint32_t *)0x400FE544)) +#define SYSCTL_SREEPROM_R (*((volatile uint32_t *)0x400FE558)) +#define SYSCTL_SRWTIMER_R (*((volatile uint32_t *)0x400FE55C)) +#define SYSCTL_RCGCWD_R (*((volatile uint32_t *)0x400FE600)) +#define SYSCTL_RCGCTIMER_R (*((volatile uint32_t *)0x400FE604)) +#define SYSCTL_RCGCGPIO_R (*((volatile uint32_t *)0x400FE608)) +#define SYSCTL_RCGCDMA_R (*((volatile uint32_t *)0x400FE60C)) +#define SYSCTL_RCGCHIB_R (*((volatile uint32_t *)0x400FE614)) +#define SYSCTL_RCGCUART_R (*((volatile uint32_t *)0x400FE618)) +#define SYSCTL_RCGCSSI_R (*((volatile uint32_t *)0x400FE61C)) +#define SYSCTL_RCGCI2C_R (*((volatile uint32_t *)0x400FE620)) +#define SYSCTL_RCGCUSB_R (*((volatile uint32_t *)0x400FE628)) +#define SYSCTL_RCGCCAN_R (*((volatile uint32_t *)0x400FE634)) +#define SYSCTL_RCGCADC_R (*((volatile uint32_t *)0x400FE638)) +#define SYSCTL_RCGCACMP_R (*((volatile uint32_t *)0x400FE63C)) +#define SYSCTL_RCGCPWM_R (*((volatile uint32_t *)0x400FE640)) +#define SYSCTL_RCGCQEI_R (*((volatile uint32_t *)0x400FE644)) +#define SYSCTL_RCGCEEPROM_R (*((volatile uint32_t *)0x400FE658)) +#define SYSCTL_RCGCWTIMER_R (*((volatile uint32_t *)0x400FE65C)) +#define SYSCTL_SCGCWD_R (*((volatile uint32_t *)0x400FE700)) +#define SYSCTL_SCGCTIMER_R (*((volatile uint32_t *)0x400FE704)) +#define SYSCTL_SCGCGPIO_R (*((volatile uint32_t *)0x400FE708)) +#define SYSCTL_SCGCDMA_R (*((volatile uint32_t *)0x400FE70C)) +#define SYSCTL_SCGCHIB_R (*((volatile uint32_t *)0x400FE714)) +#define SYSCTL_SCGCUART_R (*((volatile uint32_t *)0x400FE718)) +#define SYSCTL_SCGCSSI_R (*((volatile uint32_t *)0x400FE71C)) +#define SYSCTL_SCGCI2C_R (*((volatile uint32_t *)0x400FE720)) +#define SYSCTL_SCGCUSB_R (*((volatile uint32_t *)0x400FE728)) +#define SYSCTL_SCGCCAN_R (*((volatile uint32_t *)0x400FE734)) +#define SYSCTL_SCGCADC_R (*((volatile uint32_t *)0x400FE738)) +#define SYSCTL_SCGCACMP_R (*((volatile uint32_t *)0x400FE73C)) +#define SYSCTL_SCGCPWM_R (*((volatile uint32_t *)0x400FE740)) +#define SYSCTL_SCGCQEI_R (*((volatile uint32_t *)0x400FE744)) +#define SYSCTL_SCGCEEPROM_R (*((volatile uint32_t *)0x400FE758)) +#define SYSCTL_SCGCWTIMER_R (*((volatile uint32_t *)0x400FE75C)) +#define SYSCTL_DCGCWD_R (*((volatile uint32_t *)0x400FE800)) +#define SYSCTL_DCGCTIMER_R (*((volatile uint32_t *)0x400FE804)) +#define SYSCTL_DCGCGPIO_R (*((volatile uint32_t *)0x400FE808)) +#define SYSCTL_DCGCDMA_R (*((volatile uint32_t *)0x400FE80C)) +#define SYSCTL_DCGCHIB_R (*((volatile uint32_t *)0x400FE814)) +#define SYSCTL_DCGCUART_R (*((volatile uint32_t *)0x400FE818)) +#define SYSCTL_DCGCSSI_R (*((volatile uint32_t *)0x400FE81C)) +#define SYSCTL_DCGCI2C_R (*((volatile uint32_t *)0x400FE820)) +#define SYSCTL_DCGCUSB_R (*((volatile uint32_t *)0x400FE828)) +#define SYSCTL_DCGCCAN_R (*((volatile uint32_t *)0x400FE834)) +#define SYSCTL_DCGCADC_R (*((volatile uint32_t *)0x400FE838)) +#define SYSCTL_DCGCACMP_R (*((volatile uint32_t *)0x400FE83C)) +#define SYSCTL_DCGCPWM_R (*((volatile uint32_t *)0x400FE840)) +#define SYSCTL_DCGCQEI_R (*((volatile uint32_t *)0x400FE844)) +#define SYSCTL_DCGCEEPROM_R (*((volatile uint32_t *)0x400FE858)) +#define SYSCTL_DCGCWTIMER_R (*((volatile uint32_t *)0x400FE85C)) +#define SYSCTL_PRWD_R (*((volatile uint32_t *)0x400FEA00)) +#define SYSCTL_PRTIMER_R (*((volatile uint32_t *)0x400FEA04)) +#define SYSCTL_PRGPIO_R (*((volatile uint32_t *)0x400FEA08)) +#define SYSCTL_PRDMA_R (*((volatile uint32_t *)0x400FEA0C)) +#define SYSCTL_PRHIB_R (*((volatile uint32_t *)0x400FEA14)) +#define SYSCTL_PRUART_R (*((volatile uint32_t *)0x400FEA18)) +#define SYSCTL_PRSSI_R (*((volatile uint32_t *)0x400FEA1C)) +#define SYSCTL_PRI2C_R (*((volatile uint32_t *)0x400FEA20)) +#define SYSCTL_PRUSB_R (*((volatile uint32_t *)0x400FEA28)) +#define SYSCTL_PRCAN_R (*((volatile uint32_t *)0x400FEA34)) +#define SYSCTL_PRADC_R (*((volatile uint32_t *)0x400FEA38)) +#define SYSCTL_PRACMP_R (*((volatile uint32_t *)0x400FEA3C)) +#define SYSCTL_PRPWM_R (*((volatile uint32_t *)0x400FEA40)) +#define SYSCTL_PRQEI_R (*((volatile uint32_t *)0x400FEA44)) +#define SYSCTL_PREEPROM_R (*((volatile uint32_t *)0x400FEA58)) +#define SYSCTL_PRWTIMER_R (*((volatile uint32_t *)0x400FEA5C)) + +//***************************************************************************** +// +// Micro Direct Memory Access registers (UDMA) +// +//***************************************************************************** +#define UDMA_STAT_R (*((volatile uint32_t *)0x400FF000)) +#define UDMA_CFG_R (*((volatile uint32_t *)0x400FF004)) +#define UDMA_CTLBASE_R (*((volatile uint32_t *)0x400FF008)) +#define UDMA_ALTBASE_R (*((volatile uint32_t *)0x400FF00C)) +#define UDMA_WAITSTAT_R (*((volatile uint32_t *)0x400FF010)) +#define UDMA_SWREQ_R (*((volatile uint32_t *)0x400FF014)) +#define UDMA_USEBURSTSET_R (*((volatile uint32_t *)0x400FF018)) +#define UDMA_USEBURSTCLR_R (*((volatile uint32_t *)0x400FF01C)) +#define UDMA_REQMASKSET_R (*((volatile uint32_t *)0x400FF020)) +#define UDMA_REQMASKCLR_R (*((volatile uint32_t *)0x400FF024)) +#define UDMA_ENASET_R (*((volatile uint32_t *)0x400FF028)) +#define UDMA_ENACLR_R (*((volatile uint32_t *)0x400FF02C)) +#define UDMA_ALTSET_R (*((volatile uint32_t *)0x400FF030)) +#define UDMA_ALTCLR_R (*((volatile uint32_t *)0x400FF034)) +#define UDMA_PRIOSET_R (*((volatile uint32_t *)0x400FF038)) +#define UDMA_PRIOCLR_R (*((volatile uint32_t *)0x400FF03C)) +#define UDMA_ERRCLR_R (*((volatile uint32_t *)0x400FF04C)) +#define UDMA_CHASGN_R (*((volatile uint32_t *)0x400FF500)) +#define UDMA_CHIS_R (*((volatile uint32_t *)0x400FF504)) +#define UDMA_CHMAP0_R (*((volatile uint32_t *)0x400FF510)) +#define UDMA_CHMAP1_R (*((volatile uint32_t *)0x400FF514)) +#define UDMA_CHMAP2_R (*((volatile uint32_t *)0x400FF518)) +#define UDMA_CHMAP3_R (*((volatile uint32_t *)0x400FF51C)) + +//***************************************************************************** +// +// Micro Direct Memory Access (uDMA) offsets (UDMA) +// +//***************************************************************************** +#define UDMA_SRCENDP 0x00000000 // DMA Channel Source Address End + // Pointer +#define UDMA_DSTENDP 0x00000004 // DMA Channel Destination Address + // End Pointer +#define UDMA_CHCTL 0x00000008 // DMA Channel Control Word + +//***************************************************************************** +// +// NVIC registers (NVIC) +// +//***************************************************************************** +#define NVIC_ACTLR_R (*((volatile uint32_t *)0xE000E008)) +#define NVIC_ST_CTRL_R (*((volatile uint32_t *)0xE000E010)) +#define NVIC_ST_RELOAD_R (*((volatile uint32_t *)0xE000E014)) +#define NVIC_ST_CURRENT_R (*((volatile uint32_t *)0xE000E018)) +#define NVIC_EN0_R (*((volatile uint32_t *)0xE000E100)) +#define NVIC_EN1_R (*((volatile uint32_t *)0xE000E104)) +#define NVIC_EN2_R (*((volatile uint32_t *)0xE000E108)) +#define NVIC_EN3_R (*((volatile uint32_t *)0xE000E10C)) +#define NVIC_EN4_R (*((volatile uint32_t *)0xE000E110)) +#define NVIC_DIS0_R (*((volatile uint32_t *)0xE000E180)) +#define NVIC_DIS1_R (*((volatile uint32_t *)0xE000E184)) +#define NVIC_DIS2_R (*((volatile uint32_t *)0xE000E188)) +#define NVIC_DIS3_R (*((volatile uint32_t *)0xE000E18C)) +#define NVIC_DIS4_R (*((volatile uint32_t *)0xE000E190)) +#define NVIC_PEND0_R (*((volatile uint32_t *)0xE000E200)) +#define NVIC_PEND1_R (*((volatile uint32_t *)0xE000E204)) +#define NVIC_PEND2_R (*((volatile uint32_t *)0xE000E208)) +#define NVIC_PEND3_R (*((volatile uint32_t *)0xE000E20C)) +#define NVIC_PEND4_R (*((volatile uint32_t *)0xE000E210)) +#define NVIC_UNPEND0_R (*((volatile uint32_t *)0xE000E280)) +#define NVIC_UNPEND1_R (*((volatile uint32_t *)0xE000E284)) +#define NVIC_UNPEND2_R (*((volatile uint32_t *)0xE000E288)) +#define NVIC_UNPEND3_R (*((volatile uint32_t *)0xE000E28C)) +#define NVIC_UNPEND4_R (*((volatile uint32_t *)0xE000E290)) +#define NVIC_ACTIVE0_R (*((volatile uint32_t *)0xE000E300)) +#define NVIC_ACTIVE1_R (*((volatile uint32_t *)0xE000E304)) +#define NVIC_ACTIVE2_R (*((volatile uint32_t *)0xE000E308)) +#define NVIC_ACTIVE3_R (*((volatile uint32_t *)0xE000E30C)) +#define NVIC_ACTIVE4_R (*((volatile uint32_t *)0xE000E310)) +#define NVIC_PRI0_R (*((volatile uint32_t *)0xE000E400)) +#define NVIC_PRI1_R (*((volatile uint32_t *)0xE000E404)) +#define NVIC_PRI2_R (*((volatile uint32_t *)0xE000E408)) +#define NVIC_PRI3_R (*((volatile uint32_t *)0xE000E40C)) +#define NVIC_PRI4_R (*((volatile uint32_t *)0xE000E410)) +#define NVIC_PRI5_R (*((volatile uint32_t *)0xE000E414)) +#define NVIC_PRI6_R (*((volatile uint32_t *)0xE000E418)) +#define NVIC_PRI7_R (*((volatile uint32_t *)0xE000E41C)) +#define NVIC_PRI8_R (*((volatile uint32_t *)0xE000E420)) +#define NVIC_PRI9_R (*((volatile uint32_t *)0xE000E424)) +#define NVIC_PRI10_R (*((volatile uint32_t *)0xE000E428)) +#define NVIC_PRI11_R (*((volatile uint32_t *)0xE000E42C)) +#define NVIC_PRI12_R (*((volatile uint32_t *)0xE000E430)) +#define NVIC_PRI13_R (*((volatile uint32_t *)0xE000E434)) +#define NVIC_PRI14_R (*((volatile uint32_t *)0xE000E438)) +#define NVIC_PRI15_R (*((volatile uint32_t *)0xE000E43C)) +#define NVIC_PRI16_R (*((volatile uint32_t *)0xE000E440)) +#define NVIC_PRI17_R (*((volatile uint32_t *)0xE000E444)) +#define NVIC_PRI18_R (*((volatile uint32_t *)0xE000E448)) +#define NVIC_PRI19_R (*((volatile uint32_t *)0xE000E44C)) +#define NVIC_PRI20_R (*((volatile uint32_t *)0xE000E450)) +#define NVIC_PRI21_R (*((volatile uint32_t *)0xE000E454)) +#define NVIC_PRI22_R (*((volatile uint32_t *)0xE000E458)) +#define NVIC_PRI23_R (*((volatile uint32_t *)0xE000E45C)) +#define NVIC_PRI24_R (*((volatile uint32_t *)0xE000E460)) +#define NVIC_PRI25_R (*((volatile uint32_t *)0xE000E464)) +#define NVIC_PRI26_R (*((volatile uint32_t *)0xE000E468)) +#define NVIC_PRI27_R (*((volatile uint32_t *)0xE000E46C)) +#define NVIC_PRI28_R (*((volatile uint32_t *)0xE000E470)) +#define NVIC_PRI29_R (*((volatile uint32_t *)0xE000E474)) +#define NVIC_PRI30_R (*((volatile uint32_t *)0xE000E478)) +#define NVIC_PRI31_R (*((volatile uint32_t *)0xE000E47C)) +#define NVIC_PRI32_R (*((volatile uint32_t *)0xE000E480)) +#define NVIC_PRI33_R (*((volatile uint32_t *)0xE000E484)) +#define NVIC_PRI34_R (*((volatile uint32_t *)0xE000E488)) +#define NVIC_CPUID_R (*((volatile uint32_t *)0xE000ED00)) +#define NVIC_INT_CTRL_R (*((volatile uint32_t *)0xE000ED04)) +#define NVIC_VTABLE_R (*((volatile uint32_t *)0xE000ED08)) +#define NVIC_APINT_R (*((volatile uint32_t *)0xE000ED0C)) +#define NVIC_SYS_CTRL_R (*((volatile uint32_t *)0xE000ED10)) +#define NVIC_CFG_CTRL_R (*((volatile uint32_t *)0xE000ED14)) +#define NVIC_SYS_PRI1_R (*((volatile uint32_t *)0xE000ED18)) +#define NVIC_SYS_PRI2_R (*((volatile uint32_t *)0xE000ED1C)) +#define NVIC_SYS_PRI3_R (*((volatile uint32_t *)0xE000ED20)) +#define NVIC_SYS_HND_CTRL_R (*((volatile uint32_t *)0xE000ED24)) +#define NVIC_FAULT_STAT_R (*((volatile uint32_t *)0xE000ED28)) +#define NVIC_HFAULT_STAT_R (*((volatile uint32_t *)0xE000ED2C)) +#define NVIC_DEBUG_STAT_R (*((volatile uint32_t *)0xE000ED30)) +#define NVIC_MM_ADDR_R (*((volatile uint32_t *)0xE000ED34)) +#define NVIC_FAULT_ADDR_R (*((volatile uint32_t *)0xE000ED38)) +#define NVIC_CPAC_R (*((volatile uint32_t *)0xE000ED88)) +#define NVIC_MPU_TYPE_R (*((volatile uint32_t *)0xE000ED90)) +#define NVIC_MPU_CTRL_R (*((volatile uint32_t *)0xE000ED94)) +#define NVIC_MPU_NUMBER_R (*((volatile uint32_t *)0xE000ED98)) +#define NVIC_MPU_BASE_R (*((volatile uint32_t *)0xE000ED9C)) +#define NVIC_MPU_ATTR_R (*((volatile uint32_t *)0xE000EDA0)) +#define NVIC_MPU_BASE1_R (*((volatile uint32_t *)0xE000EDA4)) +#define NVIC_MPU_ATTR1_R (*((volatile uint32_t *)0xE000EDA8)) +#define NVIC_MPU_BASE2_R (*((volatile uint32_t *)0xE000EDAC)) +#define NVIC_MPU_ATTR2_R (*((volatile uint32_t *)0xE000EDB0)) +#define NVIC_MPU_BASE3_R (*((volatile uint32_t *)0xE000EDB4)) +#define NVIC_MPU_ATTR3_R (*((volatile uint32_t *)0xE000EDB8)) +#define NVIC_DBG_CTRL_R (*((volatile uint32_t *)0xE000EDF0)) +#define NVIC_DBG_XFER_R (*((volatile uint32_t *)0xE000EDF4)) +#define NVIC_DBG_DATA_R (*((volatile uint32_t *)0xE000EDF8)) +#define NVIC_DBG_INT_R (*((volatile uint32_t *)0xE000EDFC)) +#define NVIC_SW_TRIG_R (*((volatile uint32_t *)0xE000EF00)) +#define NVIC_FPCC_R (*((volatile uint32_t *)0xE000EF34)) +#define NVIC_FPCA_R (*((volatile uint32_t *)0xE000EF38)) +#define NVIC_FPDSC_R (*((volatile uint32_t *)0xE000EF3C)) + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOAD register. +// +//***************************************************************************** +#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value +#define WDT_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_VALUE register. +// +//***************************************************************************** +#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value +#define WDT_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_CTL register. +// +//***************************************************************************** +#define WDT_CTL_WRC 0x80000000 // Write Complete +#define WDT_CTL_INTTYPE 0x00000004 // Watchdog Interrupt Type +#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable +#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_ICR register. +// +//***************************************************************************** +#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear +#define WDT_ICR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_RIS register. +// +//***************************************************************************** +#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_MIS register. +// +//***************************************************************************** +#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_TEST register. +// +//***************************************************************************** +#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOCK register. +// +//***************************************************************************** +#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock +#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked +#define WDT_LOCK_LOCKED 0x00000001 // Locked +#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_IM register. +// +//***************************************************************************** +#define GPIO_IM_GPIO_M 0x000000FF // GPIO Interrupt Mask Enable +#define GPIO_IM_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_RIS register. +// +//***************************************************************************** +#define GPIO_RIS_GPIO_M 0x000000FF // GPIO Interrupt Raw Status +#define GPIO_RIS_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_MIS register. +// +//***************************************************************************** +#define GPIO_MIS_GPIO_M 0x000000FF // GPIO Masked Interrupt Status +#define GPIO_MIS_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_ICR register. +// +//***************************************************************************** +#define GPIO_ICR_GPIO_M 0x000000FF // GPIO Interrupt Clear +#define GPIO_ICR_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_LOCK register. +// +//***************************************************************************** +#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock +#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked + // and may be modified +#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked + // and may not be modified +#define GPIO_LOCK_KEY 0x4C4F434B // Unlocks the GPIO_CR register + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port A. +// +//***************************************************************************** +#define GPIO_PCTL_PA7_M 0xF0000000 // PA7 Mask +#define GPIO_PCTL_PA7_I2C1SDA 0x30000000 // I2C1SDA on PA7 +#define GPIO_PCTL_PA7_M1PWM3 0x50000000 // M1PWM3 on PA7 +#define GPIO_PCTL_PA6_M 0x0F000000 // PA6 Mask +#define GPIO_PCTL_PA6_I2C1SCL 0x03000000 // I2C1SCL on PA6 +#define GPIO_PCTL_PA6_M1PWM2 0x05000000 // M1PWM2 on PA6 +#define GPIO_PCTL_PA5_M 0x00F00000 // PA5 Mask +#define GPIO_PCTL_PA5_SSI0TX 0x00200000 // SSI0TX on PA5 +#define GPIO_PCTL_PA4_M 0x000F0000 // PA4 Mask +#define GPIO_PCTL_PA4_SSI0RX 0x00020000 // SSI0RX on PA4 +#define GPIO_PCTL_PA3_M 0x0000F000 // PA3 Mask +#define GPIO_PCTL_PA3_SSI0FSS 0x00002000 // SSI0FSS on PA3 +#define GPIO_PCTL_PA2_M 0x00000F00 // PA2 Mask +#define GPIO_PCTL_PA2_SSI0CLK 0x00000200 // SSI0CLK on PA2 +#define GPIO_PCTL_PA1_M 0x000000F0 // PA1 Mask +#define GPIO_PCTL_PA1_U0TX 0x00000010 // U0TX on PA1 +#define GPIO_PCTL_PA1_CAN1TX 0x00000080 // CAN1TX on PA1 +#define GPIO_PCTL_PA0_M 0x0000000F // PA0 Mask +#define GPIO_PCTL_PA0_U0RX 0x00000001 // U0RX on PA0 +#define GPIO_PCTL_PA0_CAN1RX 0x00000008 // CAN1RX on PA0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port B. +// +//***************************************************************************** +#define GPIO_PCTL_PB7_M 0xF0000000 // PB7 Mask +#define GPIO_PCTL_PB7_SSI2TX 0x20000000 // SSI2TX on PB7 +#define GPIO_PCTL_PB7_M0PWM1 0x40000000 // M0PWM1 on PB7 +#define GPIO_PCTL_PB7_T0CCP1 0x70000000 // T0CCP1 on PB7 +#define GPIO_PCTL_PB6_M 0x0F000000 // PB6 Mask +#define GPIO_PCTL_PB6_SSI2RX 0x02000000 // SSI2RX on PB6 +#define GPIO_PCTL_PB6_M0PWM0 0x04000000 // M0PWM0 on PB6 +#define GPIO_PCTL_PB6_T0CCP0 0x07000000 // T0CCP0 on PB6 +#define GPIO_PCTL_PB5_M 0x00F00000 // PB5 Mask +#define GPIO_PCTL_PB5_SSI2FSS 0x00200000 // SSI2FSS on PB5 +#define GPIO_PCTL_PB5_M0PWM3 0x00400000 // M0PWM3 on PB5 +#define GPIO_PCTL_PB5_T1CCP1 0x00700000 // T1CCP1 on PB5 +#define GPIO_PCTL_PB5_CAN0TX 0x00800000 // CAN0TX on PB5 +#define GPIO_PCTL_PB4_M 0x000F0000 // PB4 Mask +#define GPIO_PCTL_PB4_SSI2CLK 0x00020000 // SSI2CLK on PB4 +#define GPIO_PCTL_PB4_M0PWM2 0x00040000 // M0PWM2 on PB4 +#define GPIO_PCTL_PB4_T1CCP0 0x00070000 // T1CCP0 on PB4 +#define GPIO_PCTL_PB4_CAN0RX 0x00080000 // CAN0RX on PB4 +#define GPIO_PCTL_PB3_M 0x0000F000 // PB3 Mask +#define GPIO_PCTL_PB3_I2C0SDA 0x00003000 // I2C0SDA on PB3 +#define GPIO_PCTL_PB3_T3CCP1 0x00007000 // T3CCP1 on PB3 +#define GPIO_PCTL_PB2_M 0x00000F00 // PB2 Mask +#define GPIO_PCTL_PB2_I2C0SCL 0x00000300 // I2C0SCL on PB2 +#define GPIO_PCTL_PB2_T3CCP0 0x00000700 // T3CCP0 on PB2 +#define GPIO_PCTL_PB1_M 0x000000F0 // PB1 Mask +#define GPIO_PCTL_PB1_USB0VBUS 0x00000000 // USB0VBUS on PB1 +#define GPIO_PCTL_PB1_U1TX 0x00000010 // U1TX on PB1 +#define GPIO_PCTL_PB1_T2CCP1 0x00000070 // T2CCP1 on PB1 +#define GPIO_PCTL_PB0_M 0x0000000F // PB0 Mask +#define GPIO_PCTL_PB0_USB0ID 0x00000000 // USB0ID on PB0 +#define GPIO_PCTL_PB0_U1RX 0x00000001 // U1RX on PB0 +#define GPIO_PCTL_PB0_T2CCP0 0x00000007 // T2CCP0 on PB0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port C. +// +//***************************************************************************** +#define GPIO_PCTL_PC7_M 0xF0000000 // PC7 Mask +#define GPIO_PCTL_PC7_U3TX 0x10000000 // U3TX on PC7 +#define GPIO_PCTL_PC7_WT1CCP1 0x70000000 // WT1CCP1 on PC7 +#define GPIO_PCTL_PC7_USB0PFLT 0x80000000 // USB0PFLT on PC7 +#define GPIO_PCTL_PC6_M 0x0F000000 // PC6 Mask +#define GPIO_PCTL_PC6_U3RX 0x01000000 // U3RX on PC6 +#define GPIO_PCTL_PC6_PHB1 0x06000000 // PHB1 on PC6 +#define GPIO_PCTL_PC6_WT1CCP0 0x07000000 // WT1CCP0 on PC6 +#define GPIO_PCTL_PC6_USB0EPEN 0x08000000 // USB0EPEN on PC6 +#define GPIO_PCTL_PC5_M 0x00F00000 // PC5 Mask +#define GPIO_PCTL_PC5_U4TX 0x00100000 // U4TX on PC5 +#define GPIO_PCTL_PC5_U1TX 0x00200000 // U1TX on PC5 +#define GPIO_PCTL_PC5_M0PWM7 0x00400000 // M0PWM7 on PC5 +#define GPIO_PCTL_PC5_PHA1 0x00600000 // PHA1 on PC5 +#define GPIO_PCTL_PC5_WT0CCP1 0x00700000 // WT0CCP1 on PC5 +#define GPIO_PCTL_PC5_U1CTS 0x00800000 // U1CTS on PC5 +#define GPIO_PCTL_PC4_M 0x000F0000 // PC4 Mask +#define GPIO_PCTL_PC4_U4RX 0x00010000 // U4RX on PC4 +#define GPIO_PCTL_PC4_U1RX 0x00020000 // U1RX on PC4 +#define GPIO_PCTL_PC4_M0PWM6 0x00040000 // M0PWM6 on PC4 +#define GPIO_PCTL_PC4_IDX1 0x00060000 // IDX1 on PC4 +#define GPIO_PCTL_PC4_WT0CCP0 0x00070000 // WT0CCP0 on PC4 +#define GPIO_PCTL_PC4_U1RTS 0x00080000 // U1RTS on PC4 +#define GPIO_PCTL_PC3_M 0x0000F000 // PC3 Mask +#define GPIO_PCTL_PC3_TDO 0x00001000 // TDO on PC3 +#define GPIO_PCTL_PC3_T5CCP1 0x00007000 // T5CCP1 on PC3 +#define GPIO_PCTL_PC2_M 0x00000F00 // PC2 Mask +#define GPIO_PCTL_PC2_TDI 0x00000100 // TDI on PC2 +#define GPIO_PCTL_PC2_T5CCP0 0x00000700 // T5CCP0 on PC2 +#define GPIO_PCTL_PC1_M 0x000000F0 // PC1 Mask +#define GPIO_PCTL_PC1_TMS 0x00000010 // TMS on PC1 +#define GPIO_PCTL_PC1_T4CCP1 0x00000070 // T4CCP1 on PC1 +#define GPIO_PCTL_PC0_M 0x0000000F // PC0 Mask +#define GPIO_PCTL_PC0_TCK 0x00000001 // TCK on PC0 +#define GPIO_PCTL_PC0_T4CCP0 0x00000007 // T4CCP0 on PC0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port D. +// +//***************************************************************************** +#define GPIO_PCTL_PD7_M 0xF0000000 // PD7 Mask +#define GPIO_PCTL_PD7_U2TX 0x10000000 // U2TX on PD7 +#define GPIO_PCTL_PD7_PHB0 0x60000000 // PHB0 on PD7 +#define GPIO_PCTL_PD7_WT5CCP1 0x70000000 // WT5CCP1 on PD7 +#define GPIO_PCTL_PD7_NMI 0x80000000 // NMI on PD7 +#define GPIO_PCTL_PD6_M 0x0F000000 // PD6 Mask +#define GPIO_PCTL_PD6_U2RX 0x01000000 // U2RX on PD6 +#define GPIO_PCTL_PD6_M0FAULT0 0x04000000 // M0FAULT0 on PD6 +#define GPIO_PCTL_PD6_PHA0 0x06000000 // PHA0 on PD6 +#define GPIO_PCTL_PD6_WT5CCP0 0x07000000 // WT5CCP0 on PD6 +#define GPIO_PCTL_PD5_M 0x00F00000 // PD5 Mask +#define GPIO_PCTL_PD5_USB0DP 0x00000000 // USB0DP on PD5 +#define GPIO_PCTL_PD5_U6TX 0x00100000 // U6TX on PD5 +#define GPIO_PCTL_PD5_WT4CCP1 0x00700000 // WT4CCP1 on PD5 +#define GPIO_PCTL_PD4_M 0x000F0000 // PD4 Mask +#define GPIO_PCTL_PD4_USB0DM 0x00000000 // USB0DM on PD4 +#define GPIO_PCTL_PD4_U6RX 0x00010000 // U6RX on PD4 +#define GPIO_PCTL_PD4_WT4CCP0 0x00070000 // WT4CCP0 on PD4 +#define GPIO_PCTL_PD3_M 0x0000F000 // PD3 Mask +#define GPIO_PCTL_PD3_AIN4 0x00000000 // AIN4 on PD3 +#define GPIO_PCTL_PD3_SSI3TX 0x00001000 // SSI3TX on PD3 +#define GPIO_PCTL_PD3_SSI1TX 0x00002000 // SSI1TX on PD3 +#define GPIO_PCTL_PD3_IDX0 0x00006000 // IDX0 on PD3 +#define GPIO_PCTL_PD3_WT3CCP1 0x00007000 // WT3CCP1 on PD3 +#define GPIO_PCTL_PD3_USB0PFLT 0x00008000 // USB0PFLT on PD3 +#define GPIO_PCTL_PD2_M 0x00000F00 // PD2 Mask +#define GPIO_PCTL_PD2_AIN5 0x00000000 // AIN5 on PD2 +#define GPIO_PCTL_PD2_SSI3RX 0x00000100 // SSI3RX on PD2 +#define GPIO_PCTL_PD2_SSI1RX 0x00000200 // SSI1RX on PD2 +#define GPIO_PCTL_PD2_M0FAULT0 0x00000400 // M0FAULT0 on PD2 +#define GPIO_PCTL_PD2_WT3CCP0 0x00000700 // WT3CCP0 on PD2 +#define GPIO_PCTL_PD2_USB0EPEN 0x00000800 // USB0EPEN on PD2 +#define GPIO_PCTL_PD1_M 0x000000F0 // PD1 Mask +#define GPIO_PCTL_PD1_AIN6 0x00000000 // AIN6 on PD1 +#define GPIO_PCTL_PD1_SSI3FSS 0x00000010 // SSI3FSS on PD1 +#define GPIO_PCTL_PD1_SSI1FSS 0x00000020 // SSI1FSS on PD1 +#define GPIO_PCTL_PD1_I2C3SDA 0x00000030 // I2C3SDA on PD1 +#define GPIO_PCTL_PD1_M0PWM7 0x00000040 // M0PWM7 on PD1 +#define GPIO_PCTL_PD1_M1PWM1 0x00000050 // M1PWM1 on PD1 +#define GPIO_PCTL_PD1_WT2CCP1 0x00000070 // WT2CCP1 on PD1 +#define GPIO_PCTL_PD0_M 0x0000000F // PD0 Mask +#define GPIO_PCTL_PD0_AIN7 0x00000000 // AIN7 on PD0 +#define GPIO_PCTL_PD0_SSI3CLK 0x00000001 // SSI3CLK on PD0 +#define GPIO_PCTL_PD0_SSI1CLK 0x00000002 // SSI1CLK on PD0 +#define GPIO_PCTL_PD0_I2C3SCL 0x00000003 // I2C3SCL on PD0 +#define GPIO_PCTL_PD0_M0PWM6 0x00000004 // M0PWM6 on PD0 +#define GPIO_PCTL_PD0_M1PWM0 0x00000005 // M1PWM0 on PD0 +#define GPIO_PCTL_PD0_WT2CCP0 0x00000007 // WT2CCP0 on PD0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port E. +// +//***************************************************************************** +#define GPIO_PCTL_PE5_M 0x00F00000 // PE5 Mask +#define GPIO_PCTL_PE5_AIN8 0x00000000 // AIN8 on PE5 +#define GPIO_PCTL_PE5_U5TX 0x00100000 // U5TX on PE5 +#define GPIO_PCTL_PE5_I2C2SDA 0x00300000 // I2C2SDA on PE5 +#define GPIO_PCTL_PE5_M0PWM5 0x00400000 // M0PWM5 on PE5 +#define GPIO_PCTL_PE5_M1PWM3 0x00500000 // M1PWM3 on PE5 +#define GPIO_PCTL_PE5_CAN0TX 0x00800000 // CAN0TX on PE5 +#define GPIO_PCTL_PE4_M 0x000F0000 // PE4 Mask +#define GPIO_PCTL_PE4_AIN9 0x00000000 // AIN9 on PE4 +#define GPIO_PCTL_PE4_U5RX 0x00010000 // U5RX on PE4 +#define GPIO_PCTL_PE4_I2C2SCL 0x00030000 // I2C2SCL on PE4 +#define GPIO_PCTL_PE4_M0PWM4 0x00040000 // M0PWM4 on PE4 +#define GPIO_PCTL_PE4_M1PWM2 0x00050000 // M1PWM2 on PE4 +#define GPIO_PCTL_PE4_CAN0RX 0x00080000 // CAN0RX on PE4 +#define GPIO_PCTL_PE3_M 0x0000F000 // PE3 Mask +#define GPIO_PCTL_PE3_AIN0 0x00000000 // AIN0 on PE3 +#define GPIO_PCTL_PE2_M 0x00000F00 // PE2 Mask +#define GPIO_PCTL_PE2_AIN1 0x00000000 // AIN1 on PE2 +#define GPIO_PCTL_PE1_M 0x000000F0 // PE1 Mask +#define GPIO_PCTL_PE1_AIN2 0x00000000 // AIN2 on PE1 +#define GPIO_PCTL_PE1_U7TX 0x00000010 // U7TX on PE1 +#define GPIO_PCTL_PE0_M 0x0000000F // PE0 Mask +#define GPIO_PCTL_PE0_AIN3 0x00000000 // AIN3 on PE0 +#define GPIO_PCTL_PE0_U7RX 0x00000001 // U7RX on PE0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_PCTL register for +// port F. +// +//***************************************************************************** +#define GPIO_PCTL_PF4_M 0x000F0000 // PF4 Mask +#define GPIO_PCTL_PF4_M1FAULT0 0x00050000 // M1FAULT0 on PF4 +#define GPIO_PCTL_PF4_IDX0 0x00060000 // IDX0 on PF4 +#define GPIO_PCTL_PF4_T2CCP0 0x00070000 // T2CCP0 on PF4 +#define GPIO_PCTL_PF4_USB0EPEN 0x00080000 // USB0EPEN on PF4 +#define GPIO_PCTL_PF3_M 0x0000F000 // PF3 Mask +#define GPIO_PCTL_PF3_SSI1FSS 0x00002000 // SSI1FSS on PF3 +#define GPIO_PCTL_PF3_CAN0TX 0x00003000 // CAN0TX on PF3 +#define GPIO_PCTL_PF3_M1PWM7 0x00005000 // M1PWM7 on PF3 +#define GPIO_PCTL_PF3_T1CCP1 0x00007000 // T1CCP1 on PF3 +#define GPIO_PCTL_PF3_TRCLK 0x0000E000 // TRCLK on PF3 +#define GPIO_PCTL_PF2_M 0x00000F00 // PF2 Mask +#define GPIO_PCTL_PF2_SSI1CLK 0x00000200 // SSI1CLK on PF2 +#define GPIO_PCTL_PF2_M0FAULT0 0x00000400 // M0FAULT0 on PF2 +#define GPIO_PCTL_PF2_M1PWM6 0x00000500 // M1PWM6 on PF2 +#define GPIO_PCTL_PF2_T1CCP0 0x00000700 // T1CCP0 on PF2 +#define GPIO_PCTL_PF2_TRD0 0x00000E00 // TRD0 on PF2 +#define GPIO_PCTL_PF1_M 0x000000F0 // PF1 Mask +#define GPIO_PCTL_PF1_U1CTS 0x00000010 // U1CTS on PF1 +#define GPIO_PCTL_PF1_SSI1TX 0x00000020 // SSI1TX on PF1 +#define GPIO_PCTL_PF1_M1PWM5 0x00000050 // M1PWM5 on PF1 +#define GPIO_PCTL_PF1_PHB0 0x00000060 // PHB0 on PF1 +#define GPIO_PCTL_PF1_T0CCP1 0x00000070 // T0CCP1 on PF1 +#define GPIO_PCTL_PF1_C1O 0x00000090 // C1O on PF1 +#define GPIO_PCTL_PF1_TRD1 0x000000E0 // TRD1 on PF1 +#define GPIO_PCTL_PF0_M 0x0000000F // PF0 Mask +#define GPIO_PCTL_PF0_U1RTS 0x00000001 // U1RTS on PF0 +#define GPIO_PCTL_PF0_SSI1RX 0x00000002 // SSI1RX on PF0 +#define GPIO_PCTL_PF0_CAN0RX 0x00000003 // CAN0RX on PF0 +#define GPIO_PCTL_PF0_M1PWM4 0x00000005 // M1PWM4 on PF0 +#define GPIO_PCTL_PF0_PHA0 0x00000006 // PHA0 on PF0 +#define GPIO_PCTL_PF0_T0CCP0 0x00000007 // T0CCP0 on PF0 +#define GPIO_PCTL_PF0_NMI 0x00000008 // NMI on PF0 +#define GPIO_PCTL_PF0_C0O 0x00000009 // C0O on PF0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR0 register. +// +//***************************************************************************** +#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate +#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase +#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity +#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select +#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format +#define SSI_CR0_FRF_TI 0x00000010 // Synchronous Serial Frame Format +#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format +#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select +#define SSI_CR0_DSS_4 0x00000003 // 4-bit data +#define SSI_CR0_DSS_5 0x00000004 // 5-bit data +#define SSI_CR0_DSS_6 0x00000005 // 6-bit data +#define SSI_CR0_DSS_7 0x00000006 // 7-bit data +#define SSI_CR0_DSS_8 0x00000007 // 8-bit data +#define SSI_CR0_DSS_9 0x00000008 // 9-bit data +#define SSI_CR0_DSS_10 0x00000009 // 10-bit data +#define SSI_CR0_DSS_11 0x0000000A // 11-bit data +#define SSI_CR0_DSS_12 0x0000000B // 12-bit data +#define SSI_CR0_DSS_13 0x0000000C // 13-bit data +#define SSI_CR0_DSS_14 0x0000000D // 14-bit data +#define SSI_CR0_DSS_15 0x0000000E // 15-bit data +#define SSI_CR0_DSS_16 0x0000000F // 16-bit data +#define SSI_CR0_SCR_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR1 register. +// +//***************************************************************************** +#define SSI_CR1_EOT 0x00000010 // End of Transmission +#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select +#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port + // Enable +#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DR register. +// +//***************************************************************************** +#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data +#define SSI_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_SR register. +// +//***************************************************************************** +#define SSI_SR_BSY 0x00000010 // SSI Busy Bit +#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full +#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty +#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full +#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CPSR register. +// +//***************************************************************************** +#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor +#define SSI_CPSR_CPSDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_IM register. +// +//***************************************************************************** +#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask +#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask +#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt + // Mask +#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_RIS register. +// +//***************************************************************************** +#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt + // Status +#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt + // Status +#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw + // Interrupt Status +#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_MIS register. +// +//***************************************************************************** +#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked + // Interrupt Status +#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked + // Interrupt Status +#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked + // Interrupt Status +#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_ICR register. +// +//***************************************************************************** +#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt + // Clear +#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DMACTL register. +// +//***************************************************************************** +#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CC register. +// +//***************************************************************************** +#define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source +#define SSI_CC_CS_SYSPLL 0x00000000 // System clock (based on clock + // source and divisor factor) +#define SSI_CC_CS_PIOSC 0x00000005 // PIOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DR register. +// +//***************************************************************************** +#define UART_DR_OE 0x00000800 // UART Overrun Error +#define UART_DR_BE 0x00000400 // UART Break Error +#define UART_DR_PE 0x00000200 // UART Parity Error +#define UART_DR_FE 0x00000100 // UART Framing Error +#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received +#define UART_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RSR register. +// +//***************************************************************************** +#define UART_RSR_OE 0x00000008 // UART Overrun Error +#define UART_RSR_BE 0x00000004 // UART Break Error +#define UART_RSR_PE 0x00000002 // UART Parity Error +#define UART_RSR_FE 0x00000001 // UART Framing Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ECR register. +// +//***************************************************************************** +#define UART_ECR_DATA_M 0x000000FF // Error Clear +#define UART_ECR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FR register. +// +//***************************************************************************** +#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty +#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full +#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full +#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty +#define UART_FR_BUSY 0x00000008 // UART Busy +#define UART_FR_CTS 0x00000001 // Clear To Send + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ILPR register. +// +//***************************************************************************** +#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor +#define UART_ILPR_ILPDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IBRD register. +// +//***************************************************************************** +#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor +#define UART_IBRD_DIVINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FBRD register. +// +//***************************************************************************** +#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor +#define UART_FBRD_DIVFRAC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCRH register. +// +//***************************************************************************** +#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length +#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) +#define UART_LCRH_WLEN_6 0x00000020 // 6 bits +#define UART_LCRH_WLEN_7 0x00000040 // 7 bits +#define UART_LCRH_WLEN_8 0x00000060 // 8 bits +#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs +#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select +#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select +#define UART_LCRH_PEN 0x00000002 // UART Parity Enable +#define UART_LCRH_BRK 0x00000001 // UART Send Break + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CTL register. +// +//***************************************************************************** +#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send +#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send +#define UART_CTL_RTS 0x00000800 // Request to Send +#define UART_CTL_RXE 0x00000200 // UART Receive Enable +#define UART_CTL_TXE 0x00000100 // UART Transmit Enable +#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable +#define UART_CTL_HSE 0x00000020 // High-Speed Enable +#define UART_CTL_EOT 0x00000010 // End of Transmission +#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support +#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode +#define UART_CTL_SIREN 0x00000002 // UART SIR Enable +#define UART_CTL_UARTEN 0x00000001 // UART Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IFLS register. +// +//***************************************************************************** +#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO + // Level Select +#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full +#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full +#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default) +#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full +#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full +#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO + // Level Select +#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full +#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full +#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default) +#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full +#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IM register. +// +//***************************************************************************** +#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask +#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt + // Mask +#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask +#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask +#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt + // Mask +#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt + // Mask +#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask +#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask +#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem + // Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RIS register. +// +//***************************************************************************** +#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status +#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt + // Status +#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt + // Status +#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt + // Status +#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt + // Status +#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw + // Interrupt Status +#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt + // Status +#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt + // Status +#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_MIS register. +// +//***************************************************************************** +#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt + // Status +#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked + // Interrupt Status +#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked + // Interrupt Status +#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked + // Interrupt Status +#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked + // Interrupt Status +#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked + // Interrupt Status +#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt + // Status +#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt + // Status +#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ICR register. +// +//***************************************************************************** +#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear +#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear +#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear +#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear +#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear +#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear +#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear +#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear +#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem + // Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DMACTL register. +// +//***************************************************************************** +#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error +#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_9BITADDR +// register. +// +//***************************************************************************** +#define UART_9BITADDR_9BITEN 0x00008000 // Enable 9-Bit Mode +#define UART_9BITADDR_ADDR_M 0x000000FF // Self Address for 9-Bit Mode +#define UART_9BITADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_9BITAMASK +// register. +// +//***************************************************************************** +#define UART_9BITAMASK_MASK_M 0x000000FF // Self Address Mask for 9-Bit Mode +#define UART_9BITAMASK_MASK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_PP register. +// +//***************************************************************************** +#define UART_PP_NB 0x00000002 // 9-Bit Support +#define UART_PP_SC 0x00000001 // Smart Card Support + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CC register. +// +//***************************************************************************** +#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source +#define UART_CC_CS_SYSCLK 0x00000000 // System clock (based on clock + // source and divisor factor) +#define UART_CC_CS_PIOSC 0x00000005 // PIOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MSA register. +// +//***************************************************************************** +#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address +#define I2C_MSA_RS 0x00000001 // Receive not send +#define I2C_MSA_SA_S 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCS register. +// +//***************************************************************************** +#define I2C_MCS_CLKTO 0x00000080 // Clock Timeout Error +#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy +#define I2C_MCS_IDLE 0x00000020 // I2C Idle +#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost +#define I2C_MCS_HS 0x00000010 // High-Speed Enable +#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable +#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data +#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address +#define I2C_MCS_STOP 0x00000004 // Generate STOP +#define I2C_MCS_ERROR 0x00000002 // Error +#define I2C_MCS_START 0x00000002 // Generate START +#define I2C_MCS_RUN 0x00000001 // I2C Master Enable +#define I2C_MCS_BUSY 0x00000001 // I2C Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MDR register. +// +//***************************************************************************** +#define I2C_MDR_DATA_M 0x000000FF // This byte contains the data + // transferred during a transaction +#define I2C_MDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MTPR register. +// +//***************************************************************************** +#define I2C_MTPR_HS 0x00000080 // High-Speed Enable +#define I2C_MTPR_TPR_M 0x0000007F // Timer Period +#define I2C_MTPR_TPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MIMR register. +// +//***************************************************************************** +#define I2C_MIMR_CLKIM 0x00000002 // Clock Timeout Interrupt Mask +#define I2C_MIMR_IM 0x00000001 // Master Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MRIS register. +// +//***************************************************************************** +#define I2C_MRIS_CLKRIS 0x00000002 // Clock Timeout Raw Interrupt + // Status +#define I2C_MRIS_RIS 0x00000001 // Master Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MMIS register. +// +//***************************************************************************** +#define I2C_MMIS_CLKMIS 0x00000002 // Clock Timeout Masked Interrupt + // Status +#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MICR register. +// +//***************************************************************************** +#define I2C_MICR_CLKIC 0x00000002 // Clock Timeout Interrupt Clear +#define I2C_MICR_IC 0x00000001 // Master Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR register. +// +//***************************************************************************** +#define I2C_MCR_GFE 0x00000040 // I2C Glitch Filter Enable +#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable +#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable +#define I2C_MCR_LPBK 0x00000001 // I2C Loopback + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCLKOCNT register. +// +//***************************************************************************** +#define I2C_MCLKOCNT_CNTL_M 0x000000FF // I2C Master Count +#define I2C_MCLKOCNT_CNTL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MBMON register. +// +//***************************************************************************** +#define I2C_MBMON_SDA 0x00000002 // I2C SDA Status +#define I2C_MBMON_SCL 0x00000001 // I2C SCL Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR2 register. +// +//***************************************************************************** +#define I2C_MCR2_GFPW_M 0x00000070 // I2C Glitch Filter Pulse Width +#define I2C_MCR2_GFPW_BYPASS 0x00000000 // Bypass +#define I2C_MCR2_GFPW_1 0x00000010 // 1 clock +#define I2C_MCR2_GFPW_2 0x00000020 // 2 clocks +#define I2C_MCR2_GFPW_3 0x00000030 // 3 clocks +#define I2C_MCR2_GFPW_4 0x00000040 // 4 clocks +#define I2C_MCR2_GFPW_8 0x00000050 // 8 clocks +#define I2C_MCR2_GFPW_16 0x00000060 // 16 clocks +#define I2C_MCR2_GFPW_31 0x00000070 // 31 clocks + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR register. +// +//***************************************************************************** +#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address +#define I2C_SOAR_OAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SCSR register. +// +//***************************************************************************** +#define I2C_SCSR_OAR2SEL 0x00000008 // OAR2 Address Matched +#define I2C_SCSR_FBR 0x00000004 // First Byte Received +#define I2C_SCSR_TREQ 0x00000002 // Transmit Request +#define I2C_SCSR_DA 0x00000001 // Device Active +#define I2C_SCSR_RREQ 0x00000001 // Receive Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SDR register. +// +//***************************************************************************** +#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer +#define I2C_SDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SIMR register. +// +//***************************************************************************** +#define I2C_SIMR_STOPIM 0x00000004 // Stop Condition Interrupt Mask +#define I2C_SIMR_STARTIM 0x00000002 // Start Condition Interrupt Mask +#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SRIS register. +// +//***************************************************************************** +#define I2C_SRIS_STOPRIS 0x00000004 // Stop Condition Raw Interrupt + // Status +#define I2C_SRIS_STARTRIS 0x00000002 // Start Condition Raw Interrupt + // Status +#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SMIS register. +// +//***************************************************************************** +#define I2C_SMIS_STOPMIS 0x00000004 // Stop Condition Masked Interrupt + // Status +#define I2C_SMIS_STARTMIS 0x00000002 // Start Condition Masked Interrupt + // Status +#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SICR register. +// +//***************************************************************************** +#define I2C_SICR_STOPIC 0x00000004 // Stop Condition Interrupt Clear +#define I2C_SICR_STARTIC 0x00000002 // Start Condition Interrupt Clear +#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR2 register. +// +//***************************************************************************** +#define I2C_SOAR2_OAR2EN 0x00000080 // I2C Slave Own Address 2 Enable +#define I2C_SOAR2_OAR2_M 0x0000007F // I2C Slave Own Address 2 +#define I2C_SOAR2_OAR2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SACKCTL register. +// +//***************************************************************************** +#define I2C_SACKCTL_ACKOVAL 0x00000002 // I2C Slave ACK Override Value +#define I2C_SACKCTL_ACKOEN 0x00000001 // I2C Slave ACK Override Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_PP register. +// +//***************************************************************************** +#define I2C_PP_HS 0x00000001 // High-Speed Capable + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_PC register. +// +//***************************************************************************** +#define I2C_PC_HS 0x00000001 // High-Speed Capable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_CTL register. +// +//***************************************************************************** +#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3 +#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2 +#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1 +#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_SYNC register. +// +//***************************************************************************** +#define PWM_SYNC_SYNC3 0x00000008 // Reset Generator 3 Counter +#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter +#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter +#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENABLE register. +// +//***************************************************************************** +#define PWM_ENABLE_PWM7EN 0x00000080 // MnPWM7 Output Enable +#define PWM_ENABLE_PWM6EN 0x00000040 // MnPWM6 Output Enable +#define PWM_ENABLE_PWM5EN 0x00000020 // MnPWM5 Output Enable +#define PWM_ENABLE_PWM4EN 0x00000010 // MnPWM4 Output Enable +#define PWM_ENABLE_PWM3EN 0x00000008 // MnPWM3 Output Enable +#define PWM_ENABLE_PWM2EN 0x00000004 // MnPWM2 Output Enable +#define PWM_ENABLE_PWM1EN 0x00000002 // MnPWM1 Output Enable +#define PWM_ENABLE_PWM0EN 0x00000001 // MnPWM0 Output Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INVERT register. +// +//***************************************************************************** +#define PWM_INVERT_PWM7INV 0x00000080 // Invert MnPWM7 Signal +#define PWM_INVERT_PWM6INV 0x00000040 // Invert MnPWM6 Signal +#define PWM_INVERT_PWM5INV 0x00000020 // Invert MnPWM5 Signal +#define PWM_INVERT_PWM4INV 0x00000010 // Invert MnPWM4 Signal +#define PWM_INVERT_PWM3INV 0x00000008 // Invert MnPWM3 Signal +#define PWM_INVERT_PWM2INV 0x00000004 // Invert MnPWM2 Signal +#define PWM_INVERT_PWM1INV 0x00000002 // Invert MnPWM1 Signal +#define PWM_INVERT_PWM0INV 0x00000001 // Invert MnPWM0 Signal + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULT register. +// +//***************************************************************************** +#define PWM_FAULT_FAULT7 0x00000080 // MnPWM7 Fault +#define PWM_FAULT_FAULT6 0x00000040 // MnPWM6 Fault +#define PWM_FAULT_FAULT5 0x00000020 // MnPWM5 Fault +#define PWM_FAULT_FAULT4 0x00000010 // MnPWM4 Fault +#define PWM_FAULT_FAULT3 0x00000008 // MnPWM3 Fault +#define PWM_FAULT_FAULT2 0x00000004 // MnPWM2 Fault +#define PWM_FAULT_FAULT1 0x00000002 // MnPWM1 Fault +#define PWM_FAULT_FAULT0 0x00000001 // MnPWM0 Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INTEN register. +// +//***************************************************************************** +#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1 +#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0 +#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable +#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable +#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable +#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_RIS register. +// +//***************************************************************************** +#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1 +#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0 +#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted +#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted +#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted +#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ISC register. +// +//***************************************************************************** +#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted +#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted +#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status +#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status +#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status +#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_STATUS register. +// +//***************************************************************************** +#define PWM_STATUS_FAULT1 0x00000002 // Generator 1 Fault Status +#define PWM_STATUS_FAULT0 0x00000001 // Generator 0 Fault Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULTVAL register. +// +//***************************************************************************** +#define PWM_FAULTVAL_PWM7 0x00000080 // MnPWM7 Fault Value +#define PWM_FAULTVAL_PWM6 0x00000040 // MnPWM6 Fault Value +#define PWM_FAULTVAL_PWM5 0x00000020 // MnPWM5 Fault Value +#define PWM_FAULTVAL_PWM4 0x00000010 // MnPWM4 Fault Value +#define PWM_FAULTVAL_PWM3 0x00000008 // MnPWM3 Fault Value +#define PWM_FAULTVAL_PWM2 0x00000004 // MnPWM2 Fault Value +#define PWM_FAULTVAL_PWM1 0x00000002 // MnPWM1 Fault Value +#define PWM_FAULTVAL_PWM0 0x00000001 // MnPWM0 Fault Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENUPD register. +// +//***************************************************************************** +#define PWM_ENUPD_ENUPD7_M 0x0000C000 // MnPWM7 Enable Update Mode +#define PWM_ENUPD_ENUPD7_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD7_LSYNC 0x00008000 // Locally Synchronized +#define PWM_ENUPD_ENUPD7_GSYNC 0x0000C000 // Globally Synchronized +#define PWM_ENUPD_ENUPD6_M 0x00003000 // MnPWM6 Enable Update Mode +#define PWM_ENUPD_ENUPD6_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD6_LSYNC 0x00002000 // Locally Synchronized +#define PWM_ENUPD_ENUPD6_GSYNC 0x00003000 // Globally Synchronized +#define PWM_ENUPD_ENUPD5_M 0x00000C00 // MnPWM5 Enable Update Mode +#define PWM_ENUPD_ENUPD5_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD5_LSYNC 0x00000800 // Locally Synchronized +#define PWM_ENUPD_ENUPD5_GSYNC 0x00000C00 // Globally Synchronized +#define PWM_ENUPD_ENUPD4_M 0x00000300 // MnPWM4 Enable Update Mode +#define PWM_ENUPD_ENUPD4_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD4_LSYNC 0x00000200 // Locally Synchronized +#define PWM_ENUPD_ENUPD4_GSYNC 0x00000300 // Globally Synchronized +#define PWM_ENUPD_ENUPD3_M 0x000000C0 // MnPWM3 Enable Update Mode +#define PWM_ENUPD_ENUPD3_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD3_LSYNC 0x00000080 // Locally Synchronized +#define PWM_ENUPD_ENUPD3_GSYNC 0x000000C0 // Globally Synchronized +#define PWM_ENUPD_ENUPD2_M 0x00000030 // MnPWM2 Enable Update Mode +#define PWM_ENUPD_ENUPD2_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD2_LSYNC 0x00000020 // Locally Synchronized +#define PWM_ENUPD_ENUPD2_GSYNC 0x00000030 // Globally Synchronized +#define PWM_ENUPD_ENUPD1_M 0x0000000C // MnPWM1 Enable Update Mode +#define PWM_ENUPD_ENUPD1_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD1_LSYNC 0x00000008 // Locally Synchronized +#define PWM_ENUPD_ENUPD1_GSYNC 0x0000000C // Globally Synchronized +#define PWM_ENUPD_ENUPD0_M 0x00000003 // MnPWM0 Enable Update Mode +#define PWM_ENUPD_ENUPD0_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD0_LSYNC 0x00000002 // Locally Synchronized +#define PWM_ENUPD_ENUPD0_GSYNC 0x00000003 // Globally Synchronized + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CTL register. +// +//***************************************************************************** +#define PWM_0_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_0_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_0_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_0_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_0_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_0_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_0_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_0_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_0_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_0_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_0_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_0_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_0_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_0_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_0_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_0_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_0_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_0_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_0_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_0_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_0_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_0_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_0_CTL_MODE 0x00000002 // Counter Mode +#define PWM_0_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_INTEN register. +// +//***************************************************************************** +#define PWM_0_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_0_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_0_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_0_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_0_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_0_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_0_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_0_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_0_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_0_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_0_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_0_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_RIS register. +// +//***************************************************************************** +#define PWM_0_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_0_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_0_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_0_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_0_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_0_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_ISC register. +// +//***************************************************************************** +#define PWM_0_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_0_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_0_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_0_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_0_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_0_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_LOAD register. +// +//***************************************************************************** +#define PWM_0_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_0_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_COUNT register. +// +//***************************************************************************** +#define PWM_0_COUNT_M 0x0000FFFF // Counter Value +#define PWM_0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CMPA register. +// +//***************************************************************************** +#define PWM_0_CMPA_M 0x0000FFFF // Comparator A Value +#define PWM_0_CMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CMPB register. +// +//***************************************************************************** +#define PWM_0_CMPB_M 0x0000FFFF // Comparator B Value +#define PWM_0_CMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_GENA register. +// +//***************************************************************************** +#define PWM_0_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_0_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_0_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_0_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_0_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_0_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_0_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_0_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_0_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_0_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_0_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_0_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_0_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_0_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_0_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_0_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_0_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_0_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_0_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_0_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_0_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_0_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_GENB register. +// +//***************************************************************************** +#define PWM_0_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_0_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_0_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_0_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_0_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_0_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_0_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_0_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_0_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_0_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_0_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_0_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_0_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_0_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_0_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_0_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_0_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_0_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_0_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_0_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_0_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_0_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBCTL register. +// +//***************************************************************************** +#define PWM_0_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBRISE register. +// +//***************************************************************************** +#define PWM_0_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay +#define PWM_0_DBRISE_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBFALL register. +// +//***************************************************************************** +#define PWM_0_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay +#define PWM_0_DBFALL_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_0_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_0_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_0_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_0_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_0_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_0_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_0_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_0_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_0_MINFLTPER_M 0x0000FFFF // Minimum Fault Period +#define PWM_0_MINFLTPER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CTL register. +// +//***************************************************************************** +#define PWM_1_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_1_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_1_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_1_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_1_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_1_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_1_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_1_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_1_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_1_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_1_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_1_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_1_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_1_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_1_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_1_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_1_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_1_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_1_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_1_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_1_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_1_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_1_CTL_MODE 0x00000002 // Counter Mode +#define PWM_1_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_INTEN register. +// +//***************************************************************************** +#define PWM_1_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_1_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_1_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_1_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_1_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_1_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_1_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_1_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_1_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_1_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_1_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_1_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_RIS register. +// +//***************************************************************************** +#define PWM_1_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_1_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_1_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_1_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_1_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_1_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_ISC register. +// +//***************************************************************************** +#define PWM_1_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_1_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_1_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_1_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_1_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_1_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_LOAD register. +// +//***************************************************************************** +#define PWM_1_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_1_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_COUNT register. +// +//***************************************************************************** +#define PWM_1_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_1_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CMPA register. +// +//***************************************************************************** +#define PWM_1_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_1_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CMPB register. +// +//***************************************************************************** +#define PWM_1_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_1_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_GENA register. +// +//***************************************************************************** +#define PWM_1_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_1_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_1_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_1_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_1_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_1_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_1_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_1_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_1_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_1_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_1_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_1_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_1_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_1_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_1_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_1_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_1_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_1_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_1_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_1_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_1_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_1_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_GENB register. +// +//***************************************************************************** +#define PWM_1_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_1_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_1_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_1_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_1_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_1_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_1_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_1_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_1_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_1_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_1_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_1_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_1_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_1_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_1_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_1_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_1_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_1_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_1_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_1_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_1_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_1_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBCTL register. +// +//***************************************************************************** +#define PWM_1_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBRISE register. +// +//***************************************************************************** +#define PWM_1_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_1_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBFALL register. +// +//***************************************************************************** +#define PWM_1_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_1_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_1_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_1_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_1_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_1_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_1_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_1_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_1_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_1_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_1_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_1_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CTL register. +// +//***************************************************************************** +#define PWM_2_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_2_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_2_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_2_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_2_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_2_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_2_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_2_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_2_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_2_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_2_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_2_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_2_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_2_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_2_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_2_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_2_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_2_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_2_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_2_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_2_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_2_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_2_CTL_MODE 0x00000002 // Counter Mode +#define PWM_2_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_INTEN register. +// +//***************************************************************************** +#define PWM_2_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_2_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_2_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_2_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_2_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_2_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_2_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_2_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_2_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_2_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_2_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_2_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_RIS register. +// +//***************************************************************************** +#define PWM_2_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_2_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_2_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_2_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_2_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_2_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_ISC register. +// +//***************************************************************************** +#define PWM_2_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_2_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_2_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_2_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_2_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_2_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_LOAD register. +// +//***************************************************************************** +#define PWM_2_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_2_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_COUNT register. +// +//***************************************************************************** +#define PWM_2_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_2_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CMPA register. +// +//***************************************************************************** +#define PWM_2_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_2_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CMPB register. +// +//***************************************************************************** +#define PWM_2_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_2_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_GENA register. +// +//***************************************************************************** +#define PWM_2_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_2_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_2_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_2_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_2_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_2_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_2_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_2_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_2_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_2_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_2_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_2_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_2_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_2_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_2_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_2_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_2_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_2_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_2_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_2_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_2_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_2_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_GENB register. +// +//***************************************************************************** +#define PWM_2_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_2_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_2_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_2_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_2_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_2_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_2_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_2_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_2_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_2_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_2_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_2_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_2_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_2_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_2_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_2_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_2_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_2_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_2_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_2_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_2_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_2_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBCTL register. +// +//***************************************************************************** +#define PWM_2_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBRISE register. +// +//***************************************************************************** +#define PWM_2_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_2_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBFALL register. +// +//***************************************************************************** +#define PWM_2_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_2_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_2_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_2_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_2_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_2_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_2_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_2_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_2_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_2_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_2_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_2_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CTL register. +// +//***************************************************************************** +#define PWM_3_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_3_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_3_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_3_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_3_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_3_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_3_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_3_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_3_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_3_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_3_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_3_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_3_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_3_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_3_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_3_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_3_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_3_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_3_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_3_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_3_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_3_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_3_CTL_MODE 0x00000002 // Counter Mode +#define PWM_3_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_INTEN register. +// +//***************************************************************************** +#define PWM_3_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_3_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_3_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_3_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_3_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_3_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_3_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_3_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_3_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_3_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_3_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_3_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_RIS register. +// +//***************************************************************************** +#define PWM_3_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_3_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_3_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_3_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_3_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_3_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_ISC register. +// +//***************************************************************************** +#define PWM_3_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_3_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_3_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_3_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_3_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_3_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_LOAD register. +// +//***************************************************************************** +#define PWM_3_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_3_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_COUNT register. +// +//***************************************************************************** +#define PWM_3_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_3_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CMPA register. +// +//***************************************************************************** +#define PWM_3_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_3_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CMPB register. +// +//***************************************************************************** +#define PWM_3_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_3_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_GENA register. +// +//***************************************************************************** +#define PWM_3_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_3_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_3_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_3_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_3_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_3_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_3_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_3_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_3_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_3_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_3_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_3_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_3_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_3_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_3_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_3_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_3_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_3_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_3_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_3_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_3_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_3_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_GENB register. +// +//***************************************************************************** +#define PWM_3_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_3_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_3_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_3_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_3_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_3_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_3_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_3_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_3_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_3_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_3_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_3_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_3_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_3_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_3_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_3_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_3_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_3_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_3_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_3_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_3_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_3_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBCTL register. +// +//***************************************************************************** +#define PWM_3_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBRISE register. +// +//***************************************************************************** +#define PWM_3_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_3_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBFALL register. +// +//***************************************************************************** +#define PWM_3_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_3_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_3_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_3_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_3_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_3_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_3_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_3_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_3_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_3_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_3_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_3_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSEN register. +// +//***************************************************************************** +#define PWM_0_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_0_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_0_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_0_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_0_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_0_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_0_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_0_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_0_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_0_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSEN register. +// +//***************************************************************************** +#define PWM_1_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_1_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_1_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_1_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_1_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_1_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_1_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_1_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_1_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_1_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_2_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_2_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_2_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_2_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_2_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_2_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_2_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_2_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_3_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_3_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_3_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_3_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_3_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_3_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_3_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_3_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_PP register. +// +//***************************************************************************** +#define PWM_PP_ONE 0x00000400 // One-Shot Mode +#define PWM_PP_EFAULT 0x00000200 // Extended Fault +#define PWM_PP_ESYNC 0x00000100 // Extended Synchronization +#define PWM_PP_FCNT_M 0x000000F0 // Fault Inputs (per PWM unit) +#define PWM_PP_GCNT_M 0x0000000F // Generators +#define PWM_PP_FCNT_S 4 +#define PWM_PP_GCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_CTL register. +// +//***************************************************************************** +#define QEI_CTL_FILTCNT_M 0x000F0000 // Input Filter Prescale Count +#define QEI_CTL_FILTEN 0x00002000 // Enable Input Filter +#define QEI_CTL_STALLEN 0x00001000 // Stall QEI +#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse +#define QEI_CTL_INVB 0x00000400 // Invert PhB +#define QEI_CTL_INVA 0x00000200 // Invert PhA +#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity +#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1 +#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2 +#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4 +#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8 +#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16 +#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32 +#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64 +#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128 +#define QEI_CTL_VELEN 0x00000020 // Capture Velocity +#define QEI_CTL_RESMODE 0x00000010 // Reset Mode +#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode +#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode +#define QEI_CTL_SWAP 0x00000002 // Swap Signals +#define QEI_CTL_ENABLE 0x00000001 // Enable QEI +#define QEI_CTL_FILTCNT_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_STAT register. +// +//***************************************************************************** +#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation +#define QEI_STAT_ERROR 0x00000001 // Error Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_POS register. +// +//***************************************************************************** +#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator + // Value +#define QEI_POS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_MAXPOS register. +// +//***************************************************************************** +#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator + // Value +#define QEI_MAXPOS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_LOAD register. +// +//***************************************************************************** +#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value +#define QEI_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_TIME register. +// +//***************************************************************************** +#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value +#define QEI_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_COUNT register. +// +//***************************************************************************** +#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count +#define QEI_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_SPEED register. +// +//***************************************************************************** +#define QEI_SPEED_M 0xFFFFFFFF // Velocity +#define QEI_SPEED_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_INTEN register. +// +//***************************************************************************** +#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable +#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt + // Enable +#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable +#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_RIS register. +// +//***************************************************************************** +#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected +#define QEI_RIS_DIR 0x00000004 // Direction Change Detected +#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired +#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_ISC register. +// +//***************************************************************************** +#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt +#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt +#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt +#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CFG register. +// +//***************************************************************************** +#define TIMER_CFG_M 0x00000007 // GPTM Configuration +#define TIMER_CFG_32_BIT_TIMER 0x00000000 // For a 16/32-bit timer, this + // value selects the 32-bit timer + // configuration +#define TIMER_CFG_32_BIT_RTC 0x00000001 // For a 16/32-bit timer, this + // value selects the 32-bit + // real-time clock (RTC) counter + // configuration +#define TIMER_CFG_16_BIT 0x00000004 // For a 16/32-bit timer, this + // value selects the 16-bit timer + // configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMR register. +// +//***************************************************************************** +#define TIMER_TAMR_TAPLO 0x00000800 // GPTM Timer A PWM Legacy + // Operation +#define TIMER_TAMR_TAMRSU 0x00000400 // GPTM Timer A Match Register + // Update +#define TIMER_TAMR_TAPWMIE 0x00000200 // GPTM Timer A PWM Interrupt + // Enable +#define TIMER_TAMR_TAILD 0x00000100 // GPTM Timer A Interval Load Write +#define TIMER_TAMR_TASNAPS 0x00000080 // GPTM Timer A Snap-Shot Mode +#define TIMER_TAMR_TAWOT 0x00000040 // GPTM Timer A Wait-on-Trigger +#define TIMER_TAMR_TAMIE 0x00000020 // GPTM Timer A Match Interrupt + // Enable +#define TIMER_TAMR_TACDIR 0x00000010 // GPTM Timer A Count Direction +#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode + // Select +#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode +#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode +#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMR register. +// +//***************************************************************************** +#define TIMER_TBMR_TBPLO 0x00000800 // GPTM Timer B PWM Legacy + // Operation +#define TIMER_TBMR_TBMRSU 0x00000400 // GPTM Timer B Match Register + // Update +#define TIMER_TBMR_TBPWMIE 0x00000200 // GPTM Timer B PWM Interrupt + // Enable +#define TIMER_TBMR_TBILD 0x00000100 // GPTM Timer B Interval Load Write +#define TIMER_TBMR_TBSNAPS 0x00000080 // GPTM Timer B Snap-Shot Mode +#define TIMER_TBMR_TBWOT 0x00000040 // GPTM Timer B Wait-on-Trigger +#define TIMER_TBMR_TBMIE 0x00000020 // GPTM Timer B Match Interrupt + // Enable +#define TIMER_TBMR_TBCDIR 0x00000010 // GPTM Timer B Count Direction +#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode + // Select +#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode +#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode +#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CTL register. +// +//***************************************************************************** +#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level +#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger + // Enable +#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode +#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge +#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges +#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable +#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable +#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level +#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger + // Enable +#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Stall Enable +#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode +#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge +#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges +#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable +#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_SYNC register. +// +//***************************************************************************** +#define TIMER_SYNC_SYNCWT5_M 0x00C00000 // Synchronize GPTM 32/64-Bit Timer + // 5 +#define TIMER_SYNC_SYNCWT5_NONE 0x00000000 // GPTM 32/64-Bit Timer 5 is not + // affected +#define TIMER_SYNC_SYNCWT5_TA 0x00400000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 5 is + // triggered +#define TIMER_SYNC_SYNCWT5_TB 0x00800000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 5 is + // triggered +#define TIMER_SYNC_SYNCWT5_TATB 0x00C00000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 5 is triggered +#define TIMER_SYNC_SYNCWT4_M 0x00300000 // Synchronize GPTM 32/64-Bit Timer + // 4 +#define TIMER_SYNC_SYNCWT4_NONE 0x00000000 // GPTM 32/64-Bit Timer 4 is not + // affected +#define TIMER_SYNC_SYNCWT4_TA 0x00100000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 4 is + // triggered +#define TIMER_SYNC_SYNCWT4_TB 0x00200000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 4 is + // triggered +#define TIMER_SYNC_SYNCWT4_TATB 0x00300000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 4 is triggered +#define TIMER_SYNC_SYNCWT3_M 0x000C0000 // Synchronize GPTM 32/64-Bit Timer + // 3 +#define TIMER_SYNC_SYNCWT3_NONE 0x00000000 // GPTM 32/64-Bit Timer 3 is not + // affected +#define TIMER_SYNC_SYNCWT3_TA 0x00040000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 3 is + // triggered +#define TIMER_SYNC_SYNCWT3_TB 0x00080000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 3 is + // triggered +#define TIMER_SYNC_SYNCWT3_TATB 0x000C0000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 3 is triggered +#define TIMER_SYNC_SYNCWT2_M 0x00030000 // Synchronize GPTM 32/64-Bit Timer + // 2 +#define TIMER_SYNC_SYNCWT2_NONE 0x00000000 // GPTM 32/64-Bit Timer 2 is not + // affected +#define TIMER_SYNC_SYNCWT2_TA 0x00010000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 2 is + // triggered +#define TIMER_SYNC_SYNCWT2_TB 0x00020000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 2 is + // triggered +#define TIMER_SYNC_SYNCWT2_TATB 0x00030000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 2 is triggered +#define TIMER_SYNC_SYNCWT1_M 0x0000C000 // Synchronize GPTM 32/64-Bit Timer + // 1 +#define TIMER_SYNC_SYNCWT1_NONE 0x00000000 // GPTM 32/64-Bit Timer 1 is not + // affected +#define TIMER_SYNC_SYNCWT1_TA 0x00004000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 1 is + // triggered +#define TIMER_SYNC_SYNCWT1_TB 0x00008000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 1 is + // triggered +#define TIMER_SYNC_SYNCWT1_TATB 0x0000C000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 1 is triggered +#define TIMER_SYNC_SYNCWT0_M 0x00003000 // Synchronize GPTM 32/64-Bit Timer + // 0 +#define TIMER_SYNC_SYNCWT0_NONE 0x00000000 // GPTM 32/64-Bit Timer 0 is not + // affected +#define TIMER_SYNC_SYNCWT0_TA 0x00001000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 0 is + // triggered +#define TIMER_SYNC_SYNCWT0_TB 0x00002000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 0 is + // triggered +#define TIMER_SYNC_SYNCWT0_TATB 0x00003000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 0 is triggered +#define TIMER_SYNC_SYNCT5_M 0x00000C00 // Synchronize GPTM Timer 5 +#define TIMER_SYNC_SYNCT5_NONE 0x00000000 // GPTM5 is not affected +#define TIMER_SYNC_SYNCT5_TA 0x00000400 // A timeout event for Timer A of + // GPTM5 is triggered +#define TIMER_SYNC_SYNCT5_TB 0x00000800 // A timeout event for Timer B of + // GPTM5 is triggered +#define TIMER_SYNC_SYNCT5_TATB 0x00000C00 // A timeout event for both Timer A + // and Timer B of GPTM5 is + // triggered +#define TIMER_SYNC_SYNCT4_M 0x00000300 // Synchronize GPTM Timer 4 +#define TIMER_SYNC_SYNCT4_NONE 0x00000000 // GPTM4 is not affected +#define TIMER_SYNC_SYNCT4_TA 0x00000100 // A timeout event for Timer A of + // GPTM4 is triggered +#define TIMER_SYNC_SYNCT4_TB 0x00000200 // A timeout event for Timer B of + // GPTM4 is triggered +#define TIMER_SYNC_SYNCT4_TATB 0x00000300 // A timeout event for both Timer A + // and Timer B of GPTM4 is + // triggered +#define TIMER_SYNC_SYNCT3_M 0x000000C0 // Synchronize GPTM Timer 3 +#define TIMER_SYNC_SYNCT3_NONE 0x00000000 // GPTM3 is not affected +#define TIMER_SYNC_SYNCT3_TA 0x00000040 // A timeout event for Timer A of + // GPTM3 is triggered +#define TIMER_SYNC_SYNCT3_TB 0x00000080 // A timeout event for Timer B of + // GPTM3 is triggered +#define TIMER_SYNC_SYNCT3_TATB 0x000000C0 // A timeout event for both Timer A + // and Timer B of GPTM3 is + // triggered +#define TIMER_SYNC_SYNCT2_M 0x00000030 // Synchronize GPTM Timer 2 +#define TIMER_SYNC_SYNCT2_NONE 0x00000000 // GPTM2 is not affected +#define TIMER_SYNC_SYNCT2_TA 0x00000010 // A timeout event for Timer A of + // GPTM2 is triggered +#define TIMER_SYNC_SYNCT2_TB 0x00000020 // A timeout event for Timer B of + // GPTM2 is triggered +#define TIMER_SYNC_SYNCT2_TATB 0x00000030 // A timeout event for both Timer A + // and Timer B of GPTM2 is + // triggered +#define TIMER_SYNC_SYNCT1_M 0x0000000C // Synchronize GPTM Timer 1 +#define TIMER_SYNC_SYNCT1_NONE 0x00000000 // GPTM1 is not affected +#define TIMER_SYNC_SYNCT1_TA 0x00000004 // A timeout event for Timer A of + // GPTM1 is triggered +#define TIMER_SYNC_SYNCT1_TB 0x00000008 // A timeout event for Timer B of + // GPTM1 is triggered +#define TIMER_SYNC_SYNCT1_TATB 0x0000000C // A timeout event for both Timer A + // and Timer B of GPTM1 is + // triggered +#define TIMER_SYNC_SYNCT0_M 0x00000003 // Synchronize GPTM Timer 0 +#define TIMER_SYNC_SYNCT0_NONE 0x00000000 // GPTM0 is not affected +#define TIMER_SYNC_SYNCT0_TA 0x00000001 // A timeout event for Timer A of + // GPTM0 is triggered +#define TIMER_SYNC_SYNCT0_TB 0x00000002 // A timeout event for Timer B of + // GPTM0 is triggered +#define TIMER_SYNC_SYNCT0_TATB 0x00000003 // A timeout event for both Timer A + // and Timer B of GPTM0 is + // triggered + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_IMR register. +// +//***************************************************************************** +#define TIMER_IMR_WUEIM 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Interrupt Mask +#define TIMER_IMR_TBMIM 0x00000800 // GPTM Timer B Match Interrupt + // Mask +#define TIMER_IMR_CBEIM 0x00000400 // GPTM Timer B Capture Mode Event + // Interrupt Mask +#define TIMER_IMR_CBMIM 0x00000200 // GPTM Timer B Capture Mode Match + // Interrupt Mask +#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt + // Mask +#define TIMER_IMR_TAMIM 0x00000010 // GPTM Timer A Match Interrupt + // Mask +#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask +#define TIMER_IMR_CAEIM 0x00000004 // GPTM Timer A Capture Mode Event + // Interrupt Mask +#define TIMER_IMR_CAMIM 0x00000002 // GPTM Timer A Capture Mode Match + // Interrupt Mask +#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RIS register. +// +//***************************************************************************** +#define TIMER_RIS_WUERIS 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Raw Interrupt Status +#define TIMER_RIS_TBMRIS 0x00000800 // GPTM Timer B Match Raw Interrupt +#define TIMER_RIS_CBERIS 0x00000400 // GPTM Timer B Capture Mode Event + // Raw Interrupt +#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Timer B Capture Mode Match + // Raw Interrupt +#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw + // Interrupt +#define TIMER_RIS_TAMRIS 0x00000010 // GPTM Timer A Match Raw Interrupt +#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt +#define TIMER_RIS_CAERIS 0x00000004 // GPTM Timer A Capture Mode Event + // Raw Interrupt +#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Timer A Capture Mode Match + // Raw Interrupt +#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_MIS register. +// +//***************************************************************************** +#define TIMER_MIS_WUEMIS 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Masked Interrupt Status +#define TIMER_MIS_TBMMIS 0x00000800 // GPTM Timer B Match Masked + // Interrupt +#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Timer B Capture Mode Event + // Masked Interrupt +#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Timer B Capture Mode Match + // Masked Interrupt +#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked + // Interrupt +#define TIMER_MIS_TAMMIS 0x00000010 // GPTM Timer A Match Masked + // Interrupt +#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt +#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Timer A Capture Mode Event + // Masked Interrupt +#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Timer A Capture Mode Match + // Masked Interrupt +#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_ICR register. +// +//***************************************************************************** +#define TIMER_ICR_WUECINT 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Interrupt Clear +#define TIMER_ICR_TBMCINT 0x00000800 // GPTM Timer B Match Interrupt + // Clear +#define TIMER_ICR_CBECINT 0x00000400 // GPTM Timer B Capture Mode Event + // Interrupt Clear +#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Timer B Capture Mode Match + // Interrupt Clear +#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt + // Clear +#define TIMER_ICR_TAMCINT 0x00000010 // GPTM Timer A Match Interrupt + // Clear +#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear +#define TIMER_ICR_CAECINT 0x00000004 // GPTM Timer A Capture Mode Event + // Interrupt Clear +#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Timer A Capture Mode Match + // Interrupt Clear +#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAILR register. +// +//***************************************************************************** +#define TIMER_TAILR_M 0xFFFFFFFF // GPTM Timer A Interval Load + // Register +#define TIMER_TAILR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBILR register. +// +//***************************************************************************** +#define TIMER_TBILR_M 0xFFFFFFFF // GPTM Timer B Interval Load + // Register +#define TIMER_TBILR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TAMATCHR_TAMR_M 0xFFFFFFFF // GPTM Timer A Match Register +#define TIMER_TAMATCHR_TAMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TBMATCHR_TBMR_M 0xFFFFFFFF // GPTM Timer B Match Register +#define TIMER_TBMATCHR_TBMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPR register. +// +//***************************************************************************** +#define TIMER_TAPR_TAPSRH_M 0x0000FF00 // GPTM Timer A Prescale High Byte +#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale +#define TIMER_TAPR_TAPSRH_S 8 +#define TIMER_TAPR_TAPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPR register. +// +//***************************************************************************** +#define TIMER_TBPR_TBPSRH_M 0x0000FF00 // GPTM Timer B Prescale High Byte +#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale +#define TIMER_TBPR_TBPSRH_S 8 +#define TIMER_TBPR_TBPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPMR register. +// +//***************************************************************************** +#define TIMER_TAPMR_TAPSMRH_M 0x0000FF00 // GPTM Timer A Prescale Match High + // Byte +#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match +#define TIMER_TAPMR_TAPSMRH_S 8 +#define TIMER_TAPMR_TAPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPMR register. +// +//***************************************************************************** +#define TIMER_TBPMR_TBPSMRH_M 0x0000FF00 // GPTM Timer B Prescale Match High + // Byte +#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match +#define TIMER_TBPMR_TBPSMRH_S 8 +#define TIMER_TBPMR_TBPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAR register. +// +//***************************************************************************** +#define TIMER_TAR_M 0xFFFFFFFF // GPTM Timer A Register +#define TIMER_TAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBR register. +// +//***************************************************************************** +#define TIMER_TBR_M 0xFFFFFFFF // GPTM Timer B Register +#define TIMER_TBR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAV register. +// +//***************************************************************************** +#define TIMER_TAV_M 0xFFFFFFFF // GPTM Timer A Value +#define TIMER_TAV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBV register. +// +//***************************************************************************** +#define TIMER_TBV_M 0xFFFFFFFF // GPTM Timer B Value +#define TIMER_TBV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RTCPD register. +// +//***************************************************************************** +#define TIMER_RTCPD_RTCPD_M 0x0000FFFF // RTC Predivide Counter Value +#define TIMER_RTCPD_RTCPD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPS register. +// +//***************************************************************************** +#define TIMER_TAPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Snapshot +#define TIMER_TAPS_PSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPS register. +// +//***************************************************************************** +#define TIMER_TBPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Value +#define TIMER_TBPS_PSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPV register. +// +//***************************************************************************** +#define TIMER_TAPV_PSV_M 0x0000FFFF // GPTM Timer A Prescaler Value +#define TIMER_TAPV_PSV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPV register. +// +//***************************************************************************** +#define TIMER_TBPV_PSV_M 0x0000FFFF // GPTM Timer B Prescaler Value +#define TIMER_TBPV_PSV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_PP register. +// +//***************************************************************************** +#define TIMER_PP_SIZE_M 0x0000000F // Count Size +#define TIMER_PP_SIZE_16 0x00000000 // Timer A and Timer B counters are + // 16 bits each with an 8-bit + // prescale counter +#define TIMER_PP_SIZE_32 0x00000001 // Timer A and Timer B counters are + // 32 bits each with a 16-bit + // prescale counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ACTSS register. +// +//***************************************************************************** +#define ADC_ACTSS_BUSY 0x00010000 // ADC Busy +#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable +#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable +#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable +#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_RIS register. +// +//***************************************************************************** +#define ADC_RIS_INRDC 0x00010000 // Digital Comparator Raw Interrupt + // Status +#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status +#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status +#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status +#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_IM register. +// +//***************************************************************************** +#define ADC_IM_DCONSS3 0x00080000 // Digital Comparator Interrupt on + // SS3 +#define ADC_IM_DCONSS2 0x00040000 // Digital Comparator Interrupt on + // SS2 +#define ADC_IM_DCONSS1 0x00020000 // Digital Comparator Interrupt on + // SS1 +#define ADC_IM_DCONSS0 0x00010000 // Digital Comparator Interrupt on + // SS0 +#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask +#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask +#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask +#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ISC register. +// +//***************************************************************************** +#define ADC_ISC_DCINSS3 0x00080000 // Digital Comparator Interrupt + // Status on SS3 +#define ADC_ISC_DCINSS2 0x00040000 // Digital Comparator Interrupt + // Status on SS2 +#define ADC_ISC_DCINSS1 0x00020000 // Digital Comparator Interrupt + // Status on SS1 +#define ADC_ISC_DCINSS0 0x00010000 // Digital Comparator Interrupt + // Status on SS0 +#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear +#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear +#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear +#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_OSTAT register. +// +//***************************************************************************** +#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow +#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow +#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow +#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_EMUX register. +// +//***************************************************************************** +#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select +#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0 +#define ADC_EMUX_EM3_COMP1 0x00002000 // Analog Comparator 1 +#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO Pins) +#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer +#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM generator 0 +#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM generator 1 +#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM generator 2 +#define ADC_EMUX_EM3_PWM3 0x00009000 // PWM generator 3 +#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample) +#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select +#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0 +#define ADC_EMUX_EM2_COMP1 0x00000200 // Analog Comparator 1 +#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO Pins) +#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer +#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM generator 0 +#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM generator 1 +#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM generator 2 +#define ADC_EMUX_EM2_PWM3 0x00000900 // PWM generator 3 +#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample) +#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select +#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0 +#define ADC_EMUX_EM1_COMP1 0x00000020 // Analog Comparator 1 +#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO Pins) +#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer +#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM generator 0 +#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM generator 1 +#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM generator 2 +#define ADC_EMUX_EM1_PWM3 0x00000090 // PWM generator 3 +#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample) +#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select +#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0 +#define ADC_EMUX_EM0_COMP1 0x00000002 // Analog Comparator 1 +#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO Pins) +#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer +#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM generator 0 +#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM generator 1 +#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM generator 2 +#define ADC_EMUX_EM0_PWM3 0x00000009 // PWM generator 3 +#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_USTAT register. +// +//***************************************************************************** +#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow +#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow +#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow +#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_TSSEL register. +// +//***************************************************************************** +#define ADC_TSSEL_PS3_M 0x30000000 // Generator 3 PWM Module Trigger + // Select +#define ADC_TSSEL_PS3_0 0x00000000 // Use Generator 3 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS3_1 0x10000000 // Use Generator 3 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS2_M 0x00300000 // Generator 2 PWM Module Trigger + // Select +#define ADC_TSSEL_PS2_0 0x00000000 // Use Generator 2 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS2_1 0x00100000 // Use Generator 2 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS1_M 0x00003000 // Generator 1 PWM Module Trigger + // Select +#define ADC_TSSEL_PS1_0 0x00000000 // Use Generator 1 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS1_1 0x00001000 // Use Generator 1 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS0_M 0x00000030 // Generator 0 PWM Module Trigger + // Select +#define ADC_TSSEL_PS0_0 0x00000000 // Use Generator 0 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS0_1 0x00000010 // Use Generator 0 (and its + // trigger) in PWM module 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSPRI register. +// +//***************************************************************************** +#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority +#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority +#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority +#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SPC register. +// +//***************************************************************************** +#define ADC_SPC_PHASE_M 0x0000000F // Phase Difference +#define ADC_SPC_PHASE_0 0x00000000 // ADC sample lags by 0.0 +#define ADC_SPC_PHASE_22_5 0x00000001 // ADC sample lags by 22.5 +#define ADC_SPC_PHASE_45 0x00000002 // ADC sample lags by 45.0 +#define ADC_SPC_PHASE_67_5 0x00000003 // ADC sample lags by 67.5 +#define ADC_SPC_PHASE_90 0x00000004 // ADC sample lags by 90.0 +#define ADC_SPC_PHASE_112_5 0x00000005 // ADC sample lags by 112.5 +#define ADC_SPC_PHASE_135 0x00000006 // ADC sample lags by 135.0 +#define ADC_SPC_PHASE_157_5 0x00000007 // ADC sample lags by 157.5 +#define ADC_SPC_PHASE_180 0x00000008 // ADC sample lags by 180.0 +#define ADC_SPC_PHASE_202_5 0x00000009 // ADC sample lags by 202.5 +#define ADC_SPC_PHASE_225 0x0000000A // ADC sample lags by 225.0 +#define ADC_SPC_PHASE_247_5 0x0000000B // ADC sample lags by 247.5 +#define ADC_SPC_PHASE_270 0x0000000C // ADC sample lags by 270.0 +#define ADC_SPC_PHASE_292_5 0x0000000D // ADC sample lags by 292.5 +#define ADC_SPC_PHASE_315 0x0000000E // ADC sample lags by 315.0 +#define ADC_SPC_PHASE_337_5 0x0000000F // ADC sample lags by 337.5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PSSI register. +// +//***************************************************************************** +#define ADC_PSSI_GSYNC 0x80000000 // Global Synchronize +#define ADC_PSSI_SYNCWAIT 0x08000000 // Synchronize Wait +#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate +#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate +#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate +#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SAC register. +// +//***************************************************************************** +#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control +#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling +#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling +#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling +#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling +#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling +#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling +#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCISC register. +// +//***************************************************************************** +#define ADC_DCISC_DCINT7 0x00000080 // Digital Comparator 7 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT6 0x00000040 // Digital Comparator 6 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT5 0x00000020 // Digital Comparator 5 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT4 0x00000010 // Digital Comparator 4 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT3 0x00000008 // Digital Comparator 3 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT2 0x00000004 // Digital Comparator 2 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT1 0x00000002 // Digital Comparator 1 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT0 0x00000001 // Digital Comparator 0 Interrupt + // Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_CTL register. +// +//***************************************************************************** +#define ADC_CTL_VREF_M 0x00000001 // Voltage Reference Select +#define ADC_CTL_VREF_INTERNAL 0x00000000 // VDDA and GNDA are the voltage + // references + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX0 register. +// +//***************************************************************************** +#define ADC_SSMUX0_MUX7_M 0xF0000000 // 8th Sample Input Select +#define ADC_SSMUX0_MUX6_M 0x0F000000 // 7th Sample Input Select +#define ADC_SSMUX0_MUX5_M 0x00F00000 // 6th Sample Input Select +#define ADC_SSMUX0_MUX4_M 0x000F0000 // 5th Sample Input Select +#define ADC_SSMUX0_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX0_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX0_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX0_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX0_MUX7_S 28 +#define ADC_SSMUX0_MUX6_S 24 +#define ADC_SSMUX0_MUX5_S 20 +#define ADC_SSMUX0_MUX4_S 16 +#define ADC_SSMUX0_MUX3_S 12 +#define ADC_SSMUX0_MUX2_S 8 +#define ADC_SSMUX0_MUX1_S 4 +#define ADC_SSMUX0_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL0 register. +// +//***************************************************************************** +#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select +#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable +#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence +#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Differential Input + // Select +#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select +#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable +#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence +#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Differential Input + // Select +#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select +#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable +#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence +#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Differential Input + // Select +#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select +#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable +#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence +#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Differential Input + // Select +#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO0 register. +// +//***************************************************************************** +#define ADC_SSFIFO0_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register. +// +//***************************************************************************** +#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT0_HPTR_S 4 +#define ADC_SSFSTAT0_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP0 register. +// +//***************************************************************************** +#define ADC_SSOP0_S7DCOP 0x10000000 // Sample 7 Digital Comparator + // Operation +#define ADC_SSOP0_S6DCOP 0x01000000 // Sample 6 Digital Comparator + // Operation +#define ADC_SSOP0_S5DCOP 0x00100000 // Sample 5 Digital Comparator + // Operation +#define ADC_SSOP0_S4DCOP 0x00010000 // Sample 4 Digital Comparator + // Operation +#define ADC_SSOP0_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP0_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP0_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP0_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC0 register. +// +//***************************************************************************** +#define ADC_SSDC0_S7DCSEL_M 0xF0000000 // Sample 7 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_M 0x0F000000 // Sample 6 Digital Comparator + // Select +#define ADC_SSDC0_S5DCSEL_M 0x00F00000 // Sample 5 Digital Comparator + // Select +#define ADC_SSDC0_S4DCSEL_M 0x000F0000 // Sample 4 Digital Comparator + // Select +#define ADC_SSDC0_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC0_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC0_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC0_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_S 24 +#define ADC_SSDC0_S5DCSEL_S 20 +#define ADC_SSDC0_S4DCSEL_S 16 +#define ADC_SSDC0_S3DCSEL_S 12 +#define ADC_SSDC0_S2DCSEL_S 8 +#define ADC_SSDC0_S1DCSEL_S 4 +#define ADC_SSDC0_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX1 register. +// +//***************************************************************************** +#define ADC_SSMUX1_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX1_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX1_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX1_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX1_MUX3_S 12 +#define ADC_SSMUX1_MUX2_S 8 +#define ADC_SSMUX1_MUX1_S 4 +#define ADC_SSMUX1_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL1 register. +// +//***************************************************************************** +#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO1 register. +// +//***************************************************************************** +#define ADC_SSFIFO1_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register. +// +//***************************************************************************** +#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT1_HPTR_S 4 +#define ADC_SSFSTAT1_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP1 register. +// +//***************************************************************************** +#define ADC_SSOP1_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP1_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP1_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP1_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC1 register. +// +//***************************************************************************** +#define ADC_SSDC1_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC1_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC1_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_S 8 +#define ADC_SSDC1_S1DCSEL_S 4 +#define ADC_SSDC1_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX2 register. +// +//***************************************************************************** +#define ADC_SSMUX2_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX2_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX2_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX2_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX2_MUX3_S 12 +#define ADC_SSMUX2_MUX2_S 8 +#define ADC_SSMUX2_MUX1_S 4 +#define ADC_SSMUX2_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL2 register. +// +//***************************************************************************** +#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO2 register. +// +//***************************************************************************** +#define ADC_SSFIFO2_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register. +// +//***************************************************************************** +#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT2_HPTR_S 4 +#define ADC_SSFSTAT2_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP2 register. +// +//***************************************************************************** +#define ADC_SSOP2_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP2_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP2_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP2_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC2 register. +// +//***************************************************************************** +#define ADC_SSDC2_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC2_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC2_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_S 8 +#define ADC_SSDC2_S1DCSEL_S 4 +#define ADC_SSDC2_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX3 register. +// +//***************************************************************************** +#define ADC_SSMUX3_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX3_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL3 register. +// +//***************************************************************************** +#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL3_IE0 0x00000004 // Sample Interrupt Enable +#define ADC_SSCTL3_END0 0x00000002 // End of Sequence +#define ADC_SSCTL3_D0 0x00000001 // Sample Differential Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO3 register. +// +//***************************************************************************** +#define ADC_SSFIFO3_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register. +// +//***************************************************************************** +#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT3_HPTR_S 4 +#define ADC_SSFSTAT3_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP3 register. +// +//***************************************************************************** +#define ADC_SSOP3_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC3 register. +// +//***************************************************************************** +#define ADC_SSDC3_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCRIC register. +// +//***************************************************************************** +#define ADC_DCRIC_DCTRIG7 0x00800000 // Digital Comparator Trigger 7 +#define ADC_DCRIC_DCTRIG6 0x00400000 // Digital Comparator Trigger 6 +#define ADC_DCRIC_DCTRIG5 0x00200000 // Digital Comparator Trigger 5 +#define ADC_DCRIC_DCTRIG4 0x00100000 // Digital Comparator Trigger 4 +#define ADC_DCRIC_DCTRIG3 0x00080000 // Digital Comparator Trigger 3 +#define ADC_DCRIC_DCTRIG2 0x00040000 // Digital Comparator Trigger 2 +#define ADC_DCRIC_DCTRIG1 0x00020000 // Digital Comparator Trigger 1 +#define ADC_DCRIC_DCTRIG0 0x00010000 // Digital Comparator Trigger 0 +#define ADC_DCRIC_DCINT7 0x00000080 // Digital Comparator Interrupt 7 +#define ADC_DCRIC_DCINT6 0x00000040 // Digital Comparator Interrupt 6 +#define ADC_DCRIC_DCINT5 0x00000020 // Digital Comparator Interrupt 5 +#define ADC_DCRIC_DCINT4 0x00000010 // Digital Comparator Interrupt 4 +#define ADC_DCRIC_DCINT3 0x00000008 // Digital Comparator Interrupt 3 +#define ADC_DCRIC_DCINT2 0x00000004 // Digital Comparator Interrupt 2 +#define ADC_DCRIC_DCINT1 0x00000002 // Digital Comparator Interrupt 1 +#define ADC_DCRIC_DCINT0 0x00000001 // Digital Comparator Interrupt 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL0 register. +// +//***************************************************************************** +#define ADC_DCCTL0_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL0_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL0_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL0_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL0_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL0_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL0_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL0_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL0_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL0_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL0_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL0_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL0_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL0_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL0_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL0_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL1 register. +// +//***************************************************************************** +#define ADC_DCCTL1_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL1_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL1_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL1_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL1_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL1_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL1_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL1_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL1_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL1_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL1_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL1_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL1_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL1_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL1_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL1_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL2 register. +// +//***************************************************************************** +#define ADC_DCCTL2_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL2_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL2_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL2_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL2_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL2_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL2_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL2_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL2_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL2_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL2_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL2_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL2_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL2_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL2_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL2_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL3 register. +// +//***************************************************************************** +#define ADC_DCCTL3_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL3_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL3_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL3_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL3_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL3_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL3_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL3_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL3_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL3_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL3_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL3_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL3_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL3_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL3_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL3_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL4 register. +// +//***************************************************************************** +#define ADC_DCCTL4_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL4_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL4_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL4_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL4_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL4_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL4_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL4_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL4_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL4_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL4_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL4_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL4_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL4_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL4_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL4_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL5 register. +// +//***************************************************************************** +#define ADC_DCCTL5_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL5_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL5_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL5_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL5_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL5_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL5_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL5_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL5_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL5_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL5_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL5_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL5_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL5_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL5_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL5_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL6 register. +// +//***************************************************************************** +#define ADC_DCCTL6_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL6_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL6_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL6_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL6_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL6_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL6_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL6_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL6_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL6_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL6_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL6_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL6_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL6_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL6_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL6_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL7 register. +// +//***************************************************************************** +#define ADC_DCCTL7_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL7_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL7_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL7_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL7_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL7_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL7_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL7_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL7_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL7_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL7_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL7_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL7_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL7_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL7_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL7_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP0 register. +// +//***************************************************************************** +#define ADC_DCCMP0_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP0_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP0_COMP1_S 16 +#define ADC_DCCMP0_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP1 register. +// +//***************************************************************************** +#define ADC_DCCMP1_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP1_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP1_COMP1_S 16 +#define ADC_DCCMP1_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP2 register. +// +//***************************************************************************** +#define ADC_DCCMP2_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP2_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP2_COMP1_S 16 +#define ADC_DCCMP2_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP3 register. +// +//***************************************************************************** +#define ADC_DCCMP3_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP3_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP3_COMP1_S 16 +#define ADC_DCCMP3_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP4 register. +// +//***************************************************************************** +#define ADC_DCCMP4_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP4_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP4_COMP1_S 16 +#define ADC_DCCMP4_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP5 register. +// +//***************************************************************************** +#define ADC_DCCMP5_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP5_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP5_COMP1_S 16 +#define ADC_DCCMP5_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP6 register. +// +//***************************************************************************** +#define ADC_DCCMP6_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP6_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP6_COMP1_S 16 +#define ADC_DCCMP6_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP7 register. +// +//***************************************************************************** +#define ADC_DCCMP7_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP7_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP7_COMP1_S 16 +#define ADC_DCCMP7_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PP register. +// +//***************************************************************************** +#define ADC_PP_TS 0x00800000 // Temperature Sensor +#define ADC_PP_RSL_M 0x007C0000 // Resolution +#define ADC_PP_TYPE_M 0x00030000 // ADC Architecture +#define ADC_PP_TYPE_SAR 0x00000000 // SAR +#define ADC_PP_DC_M 0x0000FC00 // Digital Comparator Count +#define ADC_PP_CH_M 0x000003F0 // ADC Channel Count +#define ADC_PP_MSR_M 0x0000000F // Maximum ADC Sample Rate +#define ADC_PP_MSR_125K 0x00000001 // 125 ksps +#define ADC_PP_MSR_250K 0x00000003 // 250 ksps +#define ADC_PP_MSR_500K 0x00000005 // 500 ksps +#define ADC_PP_MSR_1M 0x00000007 // 1 Msps +#define ADC_PP_RSL_S 18 +#define ADC_PP_DC_S 10 +#define ADC_PP_CH_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PC register. +// +//***************************************************************************** +#define ADC_PC_SR_M 0x0000000F // ADC Sample Rate +#define ADC_PC_SR_125K 0x00000001 // 125 ksps +#define ADC_PC_SR_250K 0x00000003 // 250 ksps +#define ADC_PC_SR_500K 0x00000005 // 500 ksps +#define ADC_PC_SR_1M 0x00000007 // 1 Msps + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_CC register. +// +//***************************************************************************** +#define ADC_CC_CS_M 0x0000000F // ADC Clock Source +#define ADC_CC_CS_SYSPLL 0x00000000 // PLL VCO divided by CLKDIV +#define ADC_CC_CS_PIOSC 0x00000001 // PIOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACMIS register. +// +//***************************************************************************** +#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt + // Status +#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACRIS register. +// +//***************************************************************************** +#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status +#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACINTEN register. +// +//***************************************************************************** +#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable +#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACREFCTL +// register. +// +//***************************************************************************** +#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable +#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range +#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref +#define COMP_ACREFCTL_VREF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT0 register. +// +//***************************************************************************** +#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL0 register. +// +//***************************************************************************** +#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT1 register. +// +//***************************************************************************** +#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL1 register. +// +//***************************************************************************** +#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_PP register. +// +//***************************************************************************** +#define COMP_PP_C1O 0x00020000 // Comparator Output 1 Present +#define COMP_PP_C0O 0x00010000 // Comparator Output 0 Present +#define COMP_PP_CMP1 0x00000002 // Comparator 1 Present +#define COMP_PP_CMP0 0x00000001 // Comparator 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_CTL register. +// +//***************************************************************************** +#define CAN_CTL_TEST 0x00000080 // Test Mode Enable +#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable +#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission +#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable +#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable +#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable +#define CAN_CTL_INIT 0x00000001 // Initialization + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_STS register. +// +//***************************************************************************** +#define CAN_STS_BOFF 0x00000080 // Bus-Off Status +#define CAN_STS_EWARN 0x00000040 // Warning Status +#define CAN_STS_EPASS 0x00000020 // Error Passive +#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully +#define CAN_STS_TXOK 0x00000008 // Transmitted a Message + // Successfully +#define CAN_STS_LEC_M 0x00000007 // Last Error Code +#define CAN_STS_LEC_NONE 0x00000000 // No Error +#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error +#define CAN_STS_LEC_FORM 0x00000002 // Format Error +#define CAN_STS_LEC_ACK 0x00000003 // ACK Error +#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error +#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error +#define CAN_STS_LEC_CRC 0x00000006 // CRC Error +#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_ERR register. +// +//***************************************************************************** +#define CAN_ERR_RP 0x00008000 // Received Error Passive +#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter +#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter +#define CAN_ERR_REC_S 8 +#define CAN_ERR_TEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BIT register. +// +//***************************************************************************** +#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point +#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point +#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width +#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler +#define CAN_BIT_TSEG2_S 12 +#define CAN_BIT_TSEG1_S 8 +#define CAN_BIT_SJW_S 6 +#define CAN_BIT_BRP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_INT register. +// +//***************************************************************************** +#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier +#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending +#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TST register. +// +//***************************************************************************** +#define CAN_TST_RX 0x00000080 // Receive Observation +#define CAN_TST_TX_M 0x00000060 // Transmit Control +#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control +#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point +#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low +#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High +#define CAN_TST_LBACK 0x00000010 // Loopback Mode +#define CAN_TST_SILENT 0x00000008 // Silent Mode +#define CAN_TST_BASIC 0x00000004 // Basic Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BRPE register. +// +//***************************************************************************** +#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension +#define CAN_BRPE_BRPE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CRQ register. +// +//***************************************************************************** +#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF1CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CMSK register. +// +//***************************************************************************** +#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK1 register. +// +//***************************************************************************** +#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF1MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK2 register. +// +//***************************************************************************** +#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF1MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB1 register. +// +//***************************************************************************** +#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF1ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB2 register. +// +//***************************************************************************** +#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF1ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MCTL register. +// +//***************************************************************************** +#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF1MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA1 register. +// +//***************************************************************************** +#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA2 register. +// +//***************************************************************************** +#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB1 register. +// +//***************************************************************************** +#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB2 register. +// +//***************************************************************************** +#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CRQ register. +// +//***************************************************************************** +#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF2CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CMSK register. +// +//***************************************************************************** +#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK1 register. +// +//***************************************************************************** +#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF2MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK2 register. +// +//***************************************************************************** +#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF2MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB1 register. +// +//***************************************************************************** +#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF2ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB2 register. +// +//***************************************************************************** +#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF2ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MCTL register. +// +//***************************************************************************** +#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF2MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA1 register. +// +//***************************************************************************** +#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA2 register. +// +//***************************************************************************** +#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB1 register. +// +//***************************************************************************** +#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB2 register. +// +//***************************************************************************** +#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ1 register. +// +//***************************************************************************** +#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ1_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ2 register. +// +//***************************************************************************** +#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ2_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA1 register. +// +//***************************************************************************** +#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA1_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA2 register. +// +//***************************************************************************** +#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA2_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1INT register. +// +//***************************************************************************** +#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG1INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2INT register. +// +//***************************************************************************** +#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG2INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1VAL register. +// +//***************************************************************************** +#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG1VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2VAL register. +// +//***************************************************************************** +#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG2VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FADDR register. +// +//***************************************************************************** +#define USB_FADDR_M 0x0000007F // Function Address +#define USB_FADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_POWER register. +// +//***************************************************************************** +#define USB_POWER_ISOUP 0x00000080 // Isochronous Update +#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect +#define USB_POWER_RESET 0x00000008 // RESET Signaling +#define USB_POWER_RESUME 0x00000004 // RESUME Signaling +#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode +#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIS register. +// +//***************************************************************************** +#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt +#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt +#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt +#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt +#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt +#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt +#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt +#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIS register. +// +//***************************************************************************** +#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt +#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt +#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt +#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt +#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt +#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt +#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIE register. +// +//***************************************************************************** +#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable +#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable +#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable +#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable +#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable +#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable +#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable +#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIE register. +// +//***************************************************************************** +#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable +#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable +#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable +#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable +#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable +#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable +#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IS register. +// +//***************************************************************************** +#define USB_IS_VBUSERR 0x00000080 // VBUS Error (OTG only) +#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST (OTG only) +#define USB_IS_DISCON 0x00000020 // Session Disconnect (OTG only) +#define USB_IS_CONN 0x00000010 // Session Connect +#define USB_IS_SOF 0x00000008 // Start of Frame +#define USB_IS_BABBLE 0x00000004 // Babble Detected +#define USB_IS_RESET 0x00000004 // RESET Signaling Detected +#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected +#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IE register. +// +//***************************************************************************** +#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt (OTG + // only) +#define USB_IE_SESREQ 0x00000040 // Enable Session Request (OTG + // only) +#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt +#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt +#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt +#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt +#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt +#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt +#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FRAME register. +// +//***************************************************************************** +#define USB_FRAME_M 0x000007FF // Frame Number +#define USB_FRAME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPIDX register. +// +//***************************************************************************** +#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index +#define USB_EPIDX_EPIDX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TEST register. +// +//***************************************************************************** +#define USB_TEST_FORCEH 0x00000080 // Force Host Mode +#define USB_TEST_FIFOACC 0x00000040 // FIFO Access +#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO0 register. +// +//***************************************************************************** +#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO0_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO1 register. +// +//***************************************************************************** +#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO1_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO2 register. +// +//***************************************************************************** +#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO2_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO3 register. +// +//***************************************************************************** +#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO3_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO4 register. +// +//***************************************************************************** +#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO4_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO5 register. +// +//***************************************************************************** +#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO5_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO6 register. +// +//***************************************************************************** +#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO6_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO7 register. +// +//***************************************************************************** +#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO7_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DEVCTL register. +// +//***************************************************************************** +#define USB_DEVCTL_DEV 0x00000080 // Device Mode (OTG only) +#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected +#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected +#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level (OTG only) +#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd +#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid +#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid +#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid +#define USB_DEVCTL_HOST 0x00000004 // Host Mode +#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request (OTG only) +#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOSZ register. +// +//***************************************************************************** +#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOSZ register. +// +//***************************************************************************** +#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOADD +// register. +// +//***************************************************************************** +#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_TXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOADD +// register. +// +//***************************************************************************** +#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_RXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CONTIM register. +// +//***************************************************************************** +#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait +#define USB_CONTIM_WTID_M 0x0000000F // Wait ID +#define USB_CONTIM_WTCON_S 4 +#define USB_CONTIM_WTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VPLEN register. +// +//***************************************************************************** +#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length +#define USB_VPLEN_VPLEN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FSEOF register. +// +//***************************************************************************** +#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap +#define USB_FSEOF_FSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LSEOF register. +// +//***************************************************************************** +#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap +#define USB_LSEOF_LSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR0 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR0 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT0 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT0_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRL0 register. +// +//***************************************************************************** +#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout +#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear +#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet +#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear +#define USB_CSRL0_REQPKT 0x00000020 // Request Packet +#define USB_CSRL0_STALL 0x00000020 // Send Stall +#define USB_CSRL0_SETEND 0x00000010 // Setup End +#define USB_CSRL0_ERROR 0x00000010 // Error +#define USB_CSRL0_DATAEND 0x00000008 // Data End +#define USB_CSRL0_SETUP 0x00000008 // Setup Packet +#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled +#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready +#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRH0 register. +// +//***************************************************************************** +#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_CSRH0_DT 0x00000002 // Data Toggle +#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_COUNT0 register. +// +//***************************************************************************** +#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count +#define USB_COUNT0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TYPE0 register. +// +//***************************************************************************** +#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed +#define USB_TYPE0_SPEED_FULL 0x00000080 // Full +#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_NAKLMT register. +// +//***************************************************************************** +#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit +#define USB_NAKLMT_NAKLMT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP1 register. +// +//***************************************************************************** +#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL1 register. +// +//***************************************************************************** +#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL1_STALL 0x00000010 // Send STALL +#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL1_ERROR 0x00000004 // Error +#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH1 register. +// +//***************************************************************************** +#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH1_MODE 0x00000020 // Mode +#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH1_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP1 register. +// +//***************************************************************************** +#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL1 register. +// +//***************************************************************************** +#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL1_STALL 0x00000020 // Send STALL +#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL1_OVER 0x00000004 // Overrun +#define USB_RXCSRL1_ERROR 0x00000004 // Error +#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH1 register. +// +//***************************************************************************** +#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH1_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT1 register. +// +//***************************************************************************** +#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT1_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE1 register. +// +//***************************************************************************** +#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL1_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL1_TXPOLL_S \ + 0 +#define USB_TXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE1 register. +// +//***************************************************************************** +#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL1_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL1_TXPOLL_S \ + 0 +#define USB_RXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP2 register. +// +//***************************************************************************** +#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL2 register. +// +//***************************************************************************** +#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL2_STALL 0x00000010 // Send STALL +#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL2_ERROR 0x00000004 // Error +#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH2 register. +// +//***************************************************************************** +#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH2_MODE 0x00000020 // Mode +#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH2_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP2 register. +// +//***************************************************************************** +#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL2 register. +// +//***************************************************************************** +#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL2_STALL 0x00000020 // Send STALL +#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL2_ERROR 0x00000004 // Error +#define USB_RXCSRL2_OVER 0x00000004 // Overrun +#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH2 register. +// +//***************************************************************************** +#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH2_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT2 register. +// +//***************************************************************************** +#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT2_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE2 register. +// +//***************************************************************************** +#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL2_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL2_NAKLMT_S \ + 0 +#define USB_TXINTERVAL2_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE2 register. +// +//***************************************************************************** +#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL2_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL2_TXPOLL_S \ + 0 +#define USB_RXINTERVAL2_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP3 register. +// +//***************************************************************************** +#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL3 register. +// +//***************************************************************************** +#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL3_STALL 0x00000010 // Send STALL +#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL3_ERROR 0x00000004 // Error +#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH3 register. +// +//***************************************************************************** +#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH3_MODE 0x00000020 // Mode +#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH3_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP3 register. +// +//***************************************************************************** +#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL3 register. +// +//***************************************************************************** +#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL3_STALL 0x00000020 // Send STALL +#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL3_ERROR 0x00000004 // Error +#define USB_RXCSRL3_OVER 0x00000004 // Overrun +#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH3 register. +// +//***************************************************************************** +#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH3_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT3 register. +// +//***************************************************************************** +#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT3_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE3 register. +// +//***************************************************************************** +#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL3_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL3_TXPOLL_S \ + 0 +#define USB_TXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE3 register. +// +//***************************************************************************** +#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL3_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL3_TXPOLL_S \ + 0 +#define USB_RXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP4 register. +// +//***************************************************************************** +#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL4 register. +// +//***************************************************************************** +#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL4_STALL 0x00000010 // Send STALL +#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL4_ERROR 0x00000004 // Error +#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH4 register. +// +//***************************************************************************** +#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH4_MODE 0x00000020 // Mode +#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH4_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP4 register. +// +//***************************************************************************** +#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL4 register. +// +//***************************************************************************** +#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL4_STALL 0x00000020 // Send STALL +#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL4_OVER 0x00000004 // Overrun +#define USB_RXCSRL4_ERROR 0x00000004 // Error +#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH4 register. +// +//***************************************************************************** +#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH4_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT4 register. +// +//***************************************************************************** +#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE4 register. +// +//***************************************************************************** +#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL4_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL4_NAKLMT_S \ + 0 +#define USB_TXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE4 register. +// +//***************************************************************************** +#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL4_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL4_NAKLMT_S \ + 0 +#define USB_RXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP5 register. +// +//***************************************************************************** +#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL5 register. +// +//***************************************************************************** +#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL5_STALL 0x00000010 // Send STALL +#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL5_ERROR 0x00000004 // Error +#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH5 register. +// +//***************************************************************************** +#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH5_MODE 0x00000020 // Mode +#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH5_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP5 register. +// +//***************************************************************************** +#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL5 register. +// +//***************************************************************************** +#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL5_STALL 0x00000020 // Send STALL +#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL5_ERROR 0x00000004 // Error +#define USB_RXCSRL5_OVER 0x00000004 // Overrun +#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH5 register. +// +//***************************************************************************** +#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH5_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT5 register. +// +//***************************************************************************** +#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE5 register. +// +//***************************************************************************** +#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL5_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL5_NAKLMT_S \ + 0 +#define USB_TXINTERVAL5_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE5 register. +// +//***************************************************************************** +#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL5_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL5_TXPOLL_S \ + 0 +#define USB_RXINTERVAL5_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP6 register. +// +//***************************************************************************** +#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL6 register. +// +//***************************************************************************** +#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL6_STALL 0x00000010 // Send STALL +#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL6_ERROR 0x00000004 // Error +#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH6 register. +// +//***************************************************************************** +#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH6_MODE 0x00000020 // Mode +#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH6_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP6 register. +// +//***************************************************************************** +#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL6 register. +// +//***************************************************************************** +#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL6_STALL 0x00000020 // Send STALL +#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL6_ERROR 0x00000004 // Error +#define USB_RXCSRL6_OVER 0x00000004 // Overrun +#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH6 register. +// +//***************************************************************************** +#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH6_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT6 register. +// +//***************************************************************************** +#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE6 register. +// +//***************************************************************************** +#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL6_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL6_TXPOLL_S \ + 0 +#define USB_TXINTERVAL6_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE6 register. +// +//***************************************************************************** +#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL6_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL6_NAKLMT_S \ + 0 +#define USB_RXINTERVAL6_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP7 register. +// +//***************************************************************************** +#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL7 register. +// +//***************************************************************************** +#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL7_STALL 0x00000010 // Send STALL +#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL7_ERROR 0x00000004 // Error +#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH7 register. +// +//***************************************************************************** +#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH7_MODE 0x00000020 // Mode +#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH7_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP7 register. +// +//***************************************************************************** +#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL7 register. +// +//***************************************************************************** +#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL7_STALL 0x00000020 // Send STALL +#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL7_ERROR 0x00000004 // Error +#define USB_RXCSRL7_OVER 0x00000004 // Overrun +#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH7 register. +// +//***************************************************************************** +#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH7_DT 0x00000002 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT7 register. +// +//***************************************************************************** +#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE7 register. +// +//***************************************************************************** +#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL7_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL7_NAKLMT_S \ + 0 +#define USB_TXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE7 register. +// +//***************************************************************************** +#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL7_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL7_NAKLMT_S \ + 0 +#define USB_RXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT3_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPC register. +// +//***************************************************************************** +#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action +#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged +#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate +#define USB_EPC_PFLTACT_LOW 0x00000200 // Low +#define USB_EPC_PFLTACT_HIGH 0x00000300 // High +#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable +#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense +#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable +#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable +#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable + // Configuration +#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low +#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High +#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low + // (OTG only) +#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High + // (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCRIS register. +// +//***************************************************************************** +#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCIM register. +// +//***************************************************************************** +#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCISC register. +// +//***************************************************************************** +#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRRIS register. +// +//***************************************************************************** +#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRIM register. +// +//***************************************************************************** +#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRISC register. +// +//***************************************************************************** +#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_GPCS register. +// +//***************************************************************************** +#define USB_GPCS_DEVMODOTG 0x00000002 // Enable Device Mode +#define USB_GPCS_DEVMOD 0x00000001 // Device Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDC register. +// +//***************************************************************************** +#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCRIS register. +// +//***************************************************************************** +#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCIM register. +// +//***************************************************************************** +#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCISC register. +// +//***************************************************************************** +#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVRIS register. +// +//***************************************************************************** +#define USB_IDVRIS_ID 0x00000001 // ID Valid Detect Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVIM register. +// +//***************************************************************************** +#define USB_IDVIM_ID 0x00000001 // ID Valid Detect Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVISC register. +// +//***************************************************************************** +#define USB_IDVISC_ID 0x00000001 // ID Valid Detect Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMASEL register. +// +//***************************************************************************** +#define USB_DMASEL_DMACTX_M 0x00F00000 // DMA C TX Select +#define USB_DMASEL_DMACRX_M 0x000F0000 // DMA C RX Select +#define USB_DMASEL_DMABTX_M 0x0000F000 // DMA B TX Select +#define USB_DMASEL_DMABRX_M 0x00000F00 // DMA B RX Select +#define USB_DMASEL_DMAATX_M 0x000000F0 // DMA A TX Select +#define USB_DMASEL_DMAARX_M 0x0000000F // DMA A RX Select +#define USB_DMASEL_DMACTX_S 20 +#define USB_DMASEL_DMACRX_S 16 +#define USB_DMASEL_DMABTX_S 12 +#define USB_DMASEL_DMABRX_S 8 +#define USB_DMASEL_DMAATX_S 4 +#define USB_DMASEL_DMAARX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_PP register. +// +//***************************************************************************** +#define USB_PP_ECNT_M 0x0000FF00 // Endpoint Count +#define USB_PP_USB_M 0x000000C0 // USB Capability +#define USB_PP_USB_DEVICE 0x00000040 // DEVICE +#define USB_PP_USB_HOSTDEVICE 0x00000080 // HOST +#define USB_PP_USB_OTG 0x000000C0 // OTG +#define USB_PP_PHY 0x00000010 // PHY Present +#define USB_PP_TYPE_M 0x0000000F // Controller Type +#define USB_PP_TYPE_0 0x00000000 // The first-generation USB + // controller +#define USB_PP_ECNT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EESIZE register. +// +//***************************************************************************** +#define EEPROM_EESIZE_BLKCNT_M 0x07FF0000 // Number of 16-Word Blocks +#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF // Number of 32-Bit Words +#define EEPROM_EESIZE_BLKCNT_S 16 +#define EEPROM_EESIZE_WORDCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEBLOCK register. +// +//***************************************************************************** +#define EEPROM_EEBLOCK_BLOCK_M 0x0000FFFF // Current Block +#define EEPROM_EEBLOCK_BLOCK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEOFFSET +// register. +// +//***************************************************************************** +#define EEPROM_EEOFFSET_OFFSET_M \ + 0x0000000F // Current Address Offset +#define EEPROM_EEOFFSET_OFFSET_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EERDWR register. +// +//***************************************************************************** +#define EEPROM_EERDWR_VALUE_M 0xFFFFFFFF // EEPROM Read or Write Data +#define EEPROM_EERDWR_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EERDWRINC +// register. +// +//***************************************************************************** +#define EEPROM_EERDWRINC_VALUE_M \ + 0xFFFFFFFF // EEPROM Read or Write Data with + // Increment +#define EEPROM_EERDWRINC_VALUE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEDONE register. +// +//***************************************************************************** +#define EEPROM_EEDONE_WRBUSY 0x00000020 // Write Busy +#define EEPROM_EEDONE_NOPERM 0x00000010 // Write Without Permission +#define EEPROM_EEDONE_WKCOPY 0x00000008 // Working on a Copy +#define EEPROM_EEDONE_WKERASE 0x00000004 // Working on an Erase +#define EEPROM_EEDONE_WORKING 0x00000001 // EEPROM Working + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EESUPP register. +// +//***************************************************************************** +#define EEPROM_EESUPP_PRETRY 0x00000008 // Programming Must Be Retried +#define EEPROM_EESUPP_ERETRY 0x00000004 // Erase Must Be Retried + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEUNLOCK +// register. +// +//***************************************************************************** +#define EEPROM_EEUNLOCK_UNLOCK_M \ + 0xFFFFFFFF // EEPROM Unlock + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPROT register. +// +//***************************************************************************** +#define EEPROM_EEPROT_ACC 0x00000008 // Access Control +#define EEPROM_EEPROT_PROT_M 0x00000007 // Protection Control +#define EEPROM_EEPROT_PROT_RWNPW \ + 0x00000000 // This setting is the default. If + // there is no password, the block + // is not protected and is readable + // and writable +#define EEPROM_EEPROT_PROT_RWPW 0x00000001 // If there is a password, the + // block is readable or writable + // only when unlocked +#define EEPROM_EEPROT_PROT_RONPW \ + 0x00000002 // If there is no password, the + // block is readable, not writable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS0 register. +// +//***************************************************************************** +#define EEPROM_EEPASS0_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS0_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS1 register. +// +//***************************************************************************** +#define EEPROM_EEPASS1_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS1_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS2 register. +// +//***************************************************************************** +#define EEPROM_EEPASS2_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS2_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEINT register. +// +//***************************************************************************** +#define EEPROM_EEINT_INT 0x00000001 // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEHIDE register. +// +//***************************************************************************** +#define EEPROM_EEHIDE_HN_M 0xFFFFFFFE // Hide Block + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEDBGME register. +// +//***************************************************************************** +#define EEPROM_EEDBGME_KEY_M 0xFFFF0000 // Erase Key +#define EEPROM_EEDBGME_ME 0x00000001 // Mass Erase +#define EEPROM_EEDBGME_KEY_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_PP register. +// +//***************************************************************************** +#define EEPROM_PP_SIZE_M 0x0000001F // EEPROM Size +#define EEPROM_PP_SIZE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_RIS register. +// +//***************************************************************************** +#define SYSEXC_RIS_FPIXCRIS 0x00000020 // Floating-Point Inexact Exception + // Raw Interrupt Status +#define SYSEXC_RIS_FPOFCRIS 0x00000010 // Floating-Point Overflow + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPUFCRIS 0x00000008 // Floating-Point Underflow + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPIOCRIS 0x00000004 // Floating-Point Invalid Operation + // Raw Interrupt Status +#define SYSEXC_RIS_FPDZCRIS 0x00000002 // Floating-Point Divide By 0 + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPIDCRIS 0x00000001 // Floating-Point Input Denormal + // Exception Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_IM register. +// +//***************************************************************************** +#define SYSEXC_IM_FPIXCIM 0x00000020 // Floating-Point Inexact Exception + // Interrupt Mask +#define SYSEXC_IM_FPOFCIM 0x00000010 // Floating-Point Overflow + // Exception Interrupt Mask +#define SYSEXC_IM_FPUFCIM 0x00000008 // Floating-Point Underflow + // Exception Interrupt Mask +#define SYSEXC_IM_FPIOCIM 0x00000004 // Floating-Point Invalid Operation + // Interrupt Mask +#define SYSEXC_IM_FPDZCIM 0x00000002 // Floating-Point Divide By 0 + // Exception Interrupt Mask +#define SYSEXC_IM_FPIDCIM 0x00000001 // Floating-Point Input Denormal + // Exception Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_MIS register. +// +//***************************************************************************** +#define SYSEXC_MIS_FPIXCMIS 0x00000020 // Floating-Point Inexact Exception + // Masked Interrupt Status +#define SYSEXC_MIS_FPOFCMIS 0x00000010 // Floating-Point Overflow + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPUFCMIS 0x00000008 // Floating-Point Underflow + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPIOCMIS 0x00000004 // Floating-Point Invalid Operation + // Masked Interrupt Status +#define SYSEXC_MIS_FPDZCMIS 0x00000002 // Floating-Point Divide By 0 + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPIDCMIS 0x00000001 // Floating-Point Input Denormal + // Exception Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_IC register. +// +//***************************************************************************** +#define SYSEXC_IC_FPIXCIC 0x00000020 // Floating-Point Inexact Exception + // Interrupt Clear +#define SYSEXC_IC_FPOFCIC 0x00000010 // Floating-Point Overflow + // Exception Interrupt Clear +#define SYSEXC_IC_FPUFCIC 0x00000008 // Floating-Point Underflow + // Exception Interrupt Clear +#define SYSEXC_IC_FPIOCIC 0x00000004 // Floating-Point Invalid Operation + // Interrupt Clear +#define SYSEXC_IC_FPDZCIC 0x00000002 // Floating-Point Divide By 0 + // Exception Interrupt Clear +#define SYSEXC_IC_FPIDCIC 0x00000001 // Floating-Point Input Denormal + // Exception Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCC register. +// +//***************************************************************************** +#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter +#define HIB_RTCC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM0 register. +// +//***************************************************************************** +#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0 +#define HIB_RTCM0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCLD register. +// +//***************************************************************************** +#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load +#define HIB_RTCLD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CTL register. +// +//***************************************************************************** +#define HIB_CTL_WRC 0x80000000 // Write Complete/Capable +#define HIB_CTL_OSCDRV 0x00020000 // Oscillator Drive Capability +#define HIB_CTL_OSCBYP 0x00010000 // Oscillator Bypass +#define HIB_CTL_VBATSEL_M 0x00006000 // Select for Low-Battery + // Comparator +#define HIB_CTL_VBATSEL_1_9V 0x00000000 // 1.9 Volts +#define HIB_CTL_VBATSEL_2_1V 0x00002000 // 2.1 Volts (default) +#define HIB_CTL_VBATSEL_2_3V 0x00004000 // 2.3 Volts +#define HIB_CTL_VBATSEL_2_5V 0x00006000 // 2.5 Volts +#define HIB_CTL_BATCHK 0x00000400 // Check Battery Status +#define HIB_CTL_BATWKEN 0x00000200 // Wake on Low Battery +#define HIB_CTL_VDD3ON 0x00000100 // VDD Powered +#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable +#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable +#define HIB_CTL_PINWEN 0x00000010 // External Wake Pin Enable +#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable +#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request +#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IM register. +// +//***************************************************************************** +#define HIB_IM_WC 0x00000010 // External Write Complete/Capable + // Interrupt Mask +#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask +#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Mask +#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RIS register. +// +//***************************************************************************** +#define HIB_RIS_WC 0x00000010 // Write Complete/Capable Raw + // Interrupt Status +#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt + // Status +#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw + // Interrupt Status +#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_MIS register. +// +//***************************************************************************** +#define HIB_MIS_WC 0x00000010 // Write Complete/Capable Masked + // Interrupt Status +#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Status +#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Status +#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IC register. +// +//***************************************************************************** +#define HIB_IC_WC 0x00000010 // Write Complete/Capable Interrupt + // Clear +#define HIB_IC_EXTW 0x00000008 // External Wake-Up Interrupt Clear +#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Clear +#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCT register. +// +//***************************************************************************** +#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value +#define HIB_RTCT_TRIM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCSS register. +// +//***************************************************************************** +#define HIB_RTCSS_RTCSSM_M 0x7FFF0000 // RTC Sub Seconds Match +#define HIB_RTCSS_RTCSSC_M 0x00007FFF // RTC Sub Seconds Count +#define HIB_RTCSS_RTCSSM_S 16 +#define HIB_RTCSS_RTCSSC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_DATA register. +// +//***************************************************************************** +#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data +#define HIB_DATA_RTD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMA register. +// +//***************************************************************************** +#define FLASH_FMA_OFFSET_M 0x0003FFFF // Address Offset +#define FLASH_FMA_OFFSET_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMD register. +// +//***************************************************************************** +#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value +#define FLASH_FMD_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC_COMT 0x00000008 // Commit Register Value +#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory +#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory +#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCRIS register. +// +//***************************************************************************** +#define FLASH_FCRIS_PROGRIS 0x00002000 // Program Verify Error Raw + // Interrupt Status +#define FLASH_FCRIS_ERRIS 0x00000800 // Erase Verify Error Raw Interrupt + // Status +#define FLASH_FCRIS_INVDRIS 0x00000400 // Invalid Data Raw Interrupt + // Status +#define FLASH_FCRIS_VOLTRIS 0x00000200 // Pump Voltage Raw Interrupt + // Status +#define FLASH_FCRIS_ERIS 0x00000004 // EEPROM Raw Interrupt Status +#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status +#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCIM register. +// +//***************************************************************************** +#define FLASH_FCIM_PROGMASK 0x00002000 // PROGVER Interrupt Mask +#define FLASH_FCIM_ERMASK 0x00000800 // ERVER Interrupt Mask +#define FLASH_FCIM_INVDMASK 0x00000400 // Invalid Data Interrupt Mask +#define FLASH_FCIM_VOLTMASK 0x00000200 // VOLT Interrupt Mask +#define FLASH_FCIM_EMASK 0x00000004 // EEPROM Interrupt Mask +#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask +#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCMISC register. +// +//***************************************************************************** +#define FLASH_FCMISC_PROGMISC 0x00002000 // PROGVER Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_ERMISC 0x00000800 // ERVER Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_INVDMISC 0x00000400 // Invalid Data Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_VOLTMISC 0x00000200 // VOLT Masked Interrupt Status and + // Clear +#define FLASH_FCMISC_EMISC 0x00000004 // EEPROM Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC2 register. +// +//***************************************************************************** +#define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBVAL register. +// +//***************************************************************************** +#define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBN register. +// +//***************************************************************************** +#define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FSIZE register. +// +//***************************************************************************** +#define FLASH_FSIZE_SIZE_M 0x0000FFFF // Flash Size +#define FLASH_FSIZE_SIZE_256KB 0x0000007F // 256 KB of Flash + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_SSIZE register. +// +//***************************************************************************** +#define FLASH_SSIZE_SIZE_M 0x0000FFFF // SRAM Size +#define FLASH_SSIZE_SIZE_32KB 0x0000007F // 32 KB of SRAM + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_ROMSWMAP register. +// +//***************************************************************************** +#define FLASH_ROMSWMAP_SAFERTOS 0x00000001 // SafeRTOS Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_RMCTL register. +// +//***************************************************************************** +#define FLASH_RMCTL_BA 0x00000001 // Boot Alias + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_BOOTCFG register. +// +//***************************************************************************** +#define FLASH_BOOTCFG_NW 0x80000000 // Not Written +#define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port +#define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A +#define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B +#define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C +#define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D +#define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E +#define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F +#define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G +#define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H +#define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin +#define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0 +#define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1 +#define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2 +#define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3 +#define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4 +#define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5 +#define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6 +#define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7 +#define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity +#define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable +#define FLASH_BOOTCFG_KEY 0x00000010 // KEY Select +#define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1 +#define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG0 register. +// +//***************************************************************************** +#define FLASH_USERREG0_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG1 register. +// +//***************************************************************************** +#define FLASH_USERREG1_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG2 register. +// +//***************************************************************************** +#define FLASH_USERREG2_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG3 register. +// +//***************************************************************************** +#define FLASH_USERREG3_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID0 register. +// +//***************************************************************************** +#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version +#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0 + // register format. +#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class +#define SYSCTL_DID0_CLASS_TM4C123 \ + 0x00050000 // Tiva TM4C123x and TM4E123x + // microcontrollers +#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision +#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device) +#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer + // revision) +#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer + // revision) +#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision +#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major + // revision update +#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change +#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID1 register. +// +//***************************************************************************** +#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version +#define SYSCTL_DID1_VER_1 0x10000000 // fury_ib +#define SYSCTL_DID1_FAM_M 0x0F000000 // Family +#define SYSCTL_DID1_FAM_TIVA 0x00000000 // Tiva family of microcontollers +#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number +#define SYSCTL_DID1_PRTNO_TM4C123GH6PM \ + 0x00A10000 // TM4C123GH6PM +#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count +#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin LQFP package +#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin LQFP package +#define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin LQFP package +#define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin BGA package +#define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package +#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range +#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range +#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range +#define SYSCTL_DID1_TEMP_IE 0x00000060 // Available in both industrial + // temperature range (-40C to 85C) + // and extended temperature range + // (-40C to 105C) devices. See +#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type +#define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package +#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package +#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance +#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status +#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified) +#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified) +#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC0 register. +// +//***************************************************************************** +#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size +#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM +#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size +#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash +#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash +#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash +#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash +#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash +#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash +#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash +#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC1 register. +// +//***************************************************************************** +#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present +#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present +#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present +#define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present +#define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present +#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present +#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present +#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider +#define SYSCTL_DC1_MINSYSDIV_80 0x00002000 // Specifies an 80-MHz CPU clock + // with a PLL divider of 2.5 +#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock + // with a PLL divider of 4 +#define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock + // with a PLL divider of 5 +#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a + // PLL divider of 8 +#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a + // PLL divider of 10 +#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed +#define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second +#define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second +#define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second +#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed +#define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second +#define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second +#define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second +#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_DC1_MPU 0x00000080 // MPU Present +#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present +#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present +#define SYSCTL_DC1_PLL 0x00000010 // PLL Present +#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present +#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present +#define SYSCTL_DC1_SWD 0x00000002 // SWD Present +#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC2 register. +// +//***************************************************************************** +#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present +#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present +#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present +#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present +#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present +#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present +#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present +#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present +#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present +#define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed +#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present +#define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed +#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present +#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present +#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present +#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present +#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present +#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present +#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present +#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC3 register. +// +//***************************************************************************** +#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available +#define SYSCTL_DC3_CCP5 0x20000000 // T2CCP1 Pin Present +#define SYSCTL_DC3_CCP4 0x10000000 // T2CCP0 Pin Present +#define SYSCTL_DC3_CCP3 0x08000000 // T1CCP1 Pin Present +#define SYSCTL_DC3_CCP2 0x04000000 // T1CCP0 Pin Present +#define SYSCTL_DC3_CCP1 0x02000000 // T0CCP1 Pin Present +#define SYSCTL_DC3_CCP0 0x01000000 // T0CCP0 Pin Present +#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present +#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present +#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present +#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present +#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present +#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present +#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present +#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present +#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present +#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present +#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present +#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC4 register. +// +//***************************************************************************** +#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present +#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present +#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable +#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate +#define SYSCTL_DC4_CCP7 0x00008000 // T3CCP1 Pin Present +#define SYSCTL_DC4_CCP6 0x00004000 // T3CCP0 Pin Present +#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present +#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present +#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present +#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present +#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present +#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present +#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present +#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present +#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present +#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present +#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC5 register. +// +//***************************************************************************** +#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present +#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present +#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present +#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present +#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active +#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active +#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present +#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present +#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC6 register. +// +//***************************************************************************** +#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present +#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present +#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only +#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host +#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC7 register. +// +//***************************************************************************** +#define SYSCTL_DC7_DMACH30 0x40000000 // DMA Channel 30 +#define SYSCTL_DC7_DMACH29 0x20000000 // DMA Channel 29 +#define SYSCTL_DC7_DMACH28 0x10000000 // DMA Channel 28 +#define SYSCTL_DC7_DMACH27 0x08000000 // DMA Channel 27 +#define SYSCTL_DC7_DMACH26 0x04000000 // DMA Channel 26 +#define SYSCTL_DC7_DMACH25 0x02000000 // DMA Channel 25 +#define SYSCTL_DC7_DMACH24 0x01000000 // DMA Channel 24 +#define SYSCTL_DC7_DMACH23 0x00800000 // DMA Channel 23 +#define SYSCTL_DC7_DMACH22 0x00400000 // DMA Channel 22 +#define SYSCTL_DC7_DMACH21 0x00200000 // DMA Channel 21 +#define SYSCTL_DC7_DMACH20 0x00100000 // DMA Channel 20 +#define SYSCTL_DC7_DMACH19 0x00080000 // DMA Channel 19 +#define SYSCTL_DC7_DMACH18 0x00040000 // DMA Channel 18 +#define SYSCTL_DC7_DMACH17 0x00020000 // DMA Channel 17 +#define SYSCTL_DC7_DMACH16 0x00010000 // DMA Channel 16 +#define SYSCTL_DC7_DMACH15 0x00008000 // DMA Channel 15 +#define SYSCTL_DC7_DMACH14 0x00004000 // DMA Channel 14 +#define SYSCTL_DC7_DMACH13 0x00002000 // DMA Channel 13 +#define SYSCTL_DC7_DMACH12 0x00001000 // DMA Channel 12 +#define SYSCTL_DC7_DMACH11 0x00000800 // DMA Channel 11 +#define SYSCTL_DC7_DMACH10 0x00000400 // DMA Channel 10 +#define SYSCTL_DC7_DMACH9 0x00000200 // DMA Channel 9 +#define SYSCTL_DC7_DMACH8 0x00000100 // DMA Channel 8 +#define SYSCTL_DC7_DMACH7 0x00000080 // DMA Channel 7 +#define SYSCTL_DC7_DMACH6 0x00000040 // DMA Channel 6 +#define SYSCTL_DC7_DMACH5 0x00000020 // DMA Channel 5 +#define SYSCTL_DC7_DMACH4 0x00000010 // DMA Channel 4 +#define SYSCTL_DC7_DMACH3 0x00000008 // DMA Channel 3 +#define SYSCTL_DC7_DMACH2 0x00000004 // DMA Channel 2 +#define SYSCTL_DC7_DMACH1 0x00000002 // DMA Channel 1 +#define SYSCTL_DC7_DMACH0 0x00000001 // DMA Channel 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC8 register. +// +//***************************************************************************** +#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present +#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present +#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present +#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present +#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present +#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present +#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present +#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present +#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present +#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present +#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present +#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present +#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present +#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present +#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present +#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present +#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present +#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present +#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present +#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present +#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present +#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present +#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present +#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present +#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PBORCTL register. +// +//***************************************************************************** +#define SYSCTL_PBORCTL_BOR0 0x00000004 // VDD under BOR0 Event Action +#define SYSCTL_PBORCTL_BOR1 0x00000002 // VDD under BOR1 Event Action + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR0 register. +// +//***************************************************************************** +#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control +#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control +#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control +#define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control +#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control +#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control +#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control +#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR1 register. +// +//***************************************************************************** +#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control +#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control +#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control +#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control +#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control +#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control +#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control +#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control +#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control +#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control +#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control +#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control +#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control +#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control +#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR2 register. +// +//***************************************************************************** +#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control +#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control +#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control +#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control +#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control +#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control +#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control +#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RIS register. +// +//***************************************************************************** +#define SYSCTL_RIS_BOR0RIS 0x00000800 // VDD under BOR0 Raw Interrupt + // Status +#define SYSCTL_RIS_VDDARIS 0x00000400 // VDDA Power OK Event Raw + // Interrupt Status +#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt + // Status +#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt + // Status +#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status +#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw + // Interrupt Status +#define SYSCTL_RIS_BOR1RIS 0x00000002 // VDD under BOR1 Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_IMC register. +// +//***************************************************************************** +#define SYSCTL_IMC_BOR0IM 0x00000800 // VDD under BOR0 Interrupt Mask +#define SYSCTL_IMC_VDDAIM 0x00000400 // VDDA Power OK Interrupt Mask +#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask +#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask +#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask +#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure + // Interrupt Mask +#define SYSCTL_IMC_BOR1IM 0x00000002 // VDD under BOR1 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MISC register. +// +//***************************************************************************** +#define SYSCTL_MISC_BOR0MIS 0x00000800 // VDD under BOR0 Masked Interrupt + // Status +#define SYSCTL_MISC_VDDAMIS 0x00000400 // VDDA Power OK Masked Interrupt + // Status +#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt + // Status +#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt + // Status +#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status +#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked + // Interrupt Status +#define SYSCTL_MISC_BOR1MIS 0x00000002 // VDD under BOR1 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RESC register. +// +//***************************************************************************** +#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset +#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset +#define SYSCTL_RESC_SW 0x00000010 // Software Reset +#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset +#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset +#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset +#define SYSCTL_RESC_EXT 0x00000001 // External Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC register. +// +//***************************************************************************** +#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating +#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor +#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider +#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor +#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor +#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2 +#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4 +#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8 +#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16 +#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32 +#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64 +#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down +#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass +#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value +#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz +#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz +#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz +#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz +#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz +#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz +#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz +#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz +#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz +#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz +#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz +#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz +#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz +#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz +#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz +#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz +#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz +#define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz (USB) +#define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz (USB) +#define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz (USB) +#define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz (USB) +#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source +#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC +#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC +#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4 +#define SYSCTL_RCC_OSCSRC_30 0x00000030 // LFIOSC +#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable +#define SYSCTL_RCC_SYSDIV_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL +// register. +// +//***************************************************************************** +#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance + // Bus + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC2 register. +// +//***************************************************************************** +#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2 +#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200 + // MHz +#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2 +#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2 +#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL +#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2 +#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2 +#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2 +#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC +#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC +#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4 +#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // LFIOSC +#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz +#define SYSCTL_RCC2_SYSDIV2_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MOSCCTL register. +// +//***************************************************************************** +#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected +#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action +#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC0 register. +// +//***************************************************************************** +#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed +#define SYSCTL_RCGC0_ADC1SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC1SPD_250K \ + 0x00000400 // 250K samples/second +#define SYSCTL_RCGC0_ADC1SPD_500K \ + 0x00000800 // 500K samples/second +#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed +#define SYSCTL_RCGC0_ADC0SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC0SPD_250K \ + 0x00000100 // 250K samples/second +#define SYSCTL_RCGC0_ADC0SPD_500K \ + 0x00000200 // 500K samples/second +#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC1 register. +// +//***************************************************************************** +#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC2 register. +// +//***************************************************************************** +#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC0 register. +// +//***************************************************************************** +#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC1 register. +// +//***************************************************************************** +#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC2 register. +// +//***************************************************************************** +#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC0 register. +// +//***************************************************************************** +#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC1 register. +// +//***************************************************************************** +#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC2 register. +// +//***************************************************************************** +#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override +#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source +#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC +#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC +#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // LFIOSC +#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz +#define SYSCTL_DSLPCLKCFG_PIOSCPD \ + 0x00000002 // PIOSC Power Down Request +#define SYSCTL_DSLPCLKCFG_D_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SYSPROP register. +// +//***************************************************************************** +#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCCAL +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value +#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration +#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim +#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value +#define SYSCTL_PIOSCCAL_UT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value +#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result +#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been + // attempted +#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation + // completed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation + // failed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value +#define SYSCTL_PIOSCSTAT_DT_S 16 +#define SYSCTL_PIOSCSTAT_CT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLFREQ0 +// register. +// +//***************************************************************************** +#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value +#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value +#define SYSCTL_PLLFREQ0_MFRAC_S 10 +#define SYSCTL_PLLFREQ0_MINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLFREQ1 +// register. +// +//***************************************************************************** +#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value +#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value +#define SYSCTL_PLLFREQ1_Q_S 8 +#define SYSCTL_PLLFREQ1_N_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLSTAT register. +// +//***************************************************************************** +#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG +// register. +// +//***************************************************************************** +#define SYSCTL_SLPPWRCFG_FLASHPM_M \ + 0x00000030 // Flash Power Modes +#define SYSCTL_SLPPWRCFG_FLASHPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_SLPPWRCFG_FLASHPM_SLP \ + 0x00000020 // Low Power Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_M \ + 0x00000003 // SRAM Power Modes +#define SYSCTL_SLPPWRCFG_SRAMPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_SBY \ + 0x00000001 // Standby Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_LP \ + 0x00000003 // Low Power Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPPWRCFG_FLASHPM_M \ + 0x00000030 // Flash Power Modes +#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \ + 0x00000020 // Low Power Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_M \ + 0x00000003 // SRAM Power Modes +#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \ + 0x00000001 // Standby Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_LP \ + 0x00000003 // Low Power Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC9 register. +// +//***************************************************************************** +#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present +#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present +#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present +#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present +#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present +#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present +#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present +#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present +#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present +#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present +#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present +#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present +#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present +#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present +#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present +#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_NVMSTAT register. +// +//***************************************************************************** +#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer + // Available + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDOSPCTL +// register. +// +//***************************************************************************** +#define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable +#define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage +#define SYSCTL_LDOSPCTL_VLDO_0_90V \ + 0x00000012 // 0.90 V +#define SYSCTL_LDOSPCTL_VLDO_0_95V \ + 0x00000013 // 0.95 V +#define SYSCTL_LDOSPCTL_VLDO_1_00V \ + 0x00000014 // 1.00 V +#define SYSCTL_LDOSPCTL_VLDO_1_05V \ + 0x00000015 // 1.05 V +#define SYSCTL_LDOSPCTL_VLDO_1_10V \ + 0x00000016 // 1.10 V +#define SYSCTL_LDOSPCTL_VLDO_1_15V \ + 0x00000017 // 1.15 V +#define SYSCTL_LDOSPCTL_VLDO_1_20V \ + 0x00000018 // 1.20 V + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDODPCTL +// register. +// +//***************************************************************************** +#define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable +#define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage +#define SYSCTL_LDODPCTL_VLDO_0_90V \ + 0x00000012 // 0.90 V +#define SYSCTL_LDODPCTL_VLDO_0_95V \ + 0x00000013 // 0.95 V +#define SYSCTL_LDODPCTL_VLDO_1_00V \ + 0x00000014 // 1.00 V +#define SYSCTL_LDODPCTL_VLDO_1_05V \ + 0x00000015 // 1.05 V +#define SYSCTL_LDODPCTL_VLDO_1_10V \ + 0x00000016 // 1.10 V +#define SYSCTL_LDODPCTL_VLDO_1_15V \ + 0x00000017 // 1.15 V +#define SYSCTL_LDODPCTL_VLDO_1_20V \ + 0x00000018 // 1.20 V + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPWD register. +// +//***************************************************************************** +#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present +#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPTIMER register. +// +//***************************************************************************** +#define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Present +#define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Present +#define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Present +#define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Present +#define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Present +#define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPGPIO register. +// +//***************************************************************************** +#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present +#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present +#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present +#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present +#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present +#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present +#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present +#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present +#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present +#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present +#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present +#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present +#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present +#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present +#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPDMA register. +// +//***************************************************************************** +#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPHIB register. +// +//***************************************************************************** +#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPUART register. +// +//***************************************************************************** +#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present +#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present +#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present +#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present +#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present +#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present +#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present +#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPSSI register. +// +//***************************************************************************** +#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present +#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present +#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present +#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPI2C register. +// +//***************************************************************************** +#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present +#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present +#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present +#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present +#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present +#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPUSB register. +// +//***************************************************************************** +#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPCAN register. +// +//***************************************************************************** +#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present +#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPADC register. +// +//***************************************************************************** +#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present +#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPACMP register. +// +//***************************************************************************** +#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPPWM register. +// +//***************************************************************************** +#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present +#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPQEI register. +// +//***************************************************************************** +#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present +#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_PPWTIMER_P5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Present +#define SYSCTL_PPWTIMER_P4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Present +#define SYSCTL_PPWTIMER_P3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Present +#define SYSCTL_PPWTIMER_P2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Present +#define SYSCTL_PPWTIMER_P1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Present +#define SYSCTL_PPWTIMER_P0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRWD register. +// +//***************************************************************************** +#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset +#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRTIMER register. +// +//***************************************************************************** +#define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Software Reset +#define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Software Reset +#define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Software Reset +#define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Software Reset +#define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Software Reset +#define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRGPIO register. +// +//***************************************************************************** +#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset +#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset +#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset +#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset +#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset +#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRDMA register. +// +//***************************************************************************** +#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRHIB register. +// +//***************************************************************************** +#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software + // Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRUART register. +// +//***************************************************************************** +#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset +#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset +#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset +#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset +#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset +#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset +#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset +#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRSSI register. +// +//***************************************************************************** +#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset +#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset +#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset +#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRI2C register. +// +//***************************************************************************** +#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset +#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset +#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset +#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRUSB register. +// +//***************************************************************************** +#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCAN register. +// +//***************************************************************************** +#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset +#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRADC register. +// +//***************************************************************************** +#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset +#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRACMP register. +// +//***************************************************************************** +#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0 + // Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRPWM register. +// +//***************************************************************************** +#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset +#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRQEI register. +// +//***************************************************************************** +#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset +#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SREEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Software Reset +#define SYSCTL_SRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Software Reset +#define SYSCTL_SRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Software Reset +#define SYSCTL_SRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Software Reset +#define SYSCTL_SRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Software Reset +#define SYSCTL_SRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCWD register. +// +//***************************************************************************** +#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Run Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCADC register. +// +//***************************************************************************** +#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Run Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCWD register. +// +//***************************************************************************** +#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCADC register. +// +//***************************************************************************** +#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCWTIMER_S5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCWD register. +// +//***************************************************************************** +#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCADC register. +// +//***************************************************************************** +#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0 + // Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCWTIMER_D5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRWD register. +// +//***************************************************************************** +#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral + // Ready +#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRTIMER register. +// +//***************************************************************************** +#define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Peripheral Ready +#define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Peripheral Ready +#define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Peripheral Ready +#define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Peripheral Ready +#define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Peripheral Ready +#define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRGPIO register. +// +//***************************************************************************** +#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready +#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready +#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready +#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready +#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready +#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRDMA register. +// +//***************************************************************************** +#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRHIB register. +// +//***************************************************************************** +#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRUART register. +// +//***************************************************************************** +#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready +#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready +#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready +#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready +#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready +#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready +#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready +#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRSSI register. +// +//***************************************************************************** +#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready +#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready +#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready +#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRI2C register. +// +//***************************************************************************** +#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready +#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready +#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready +#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRUSB register. +// +//***************************************************************************** +#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRCAN register. +// +//***************************************************************************** +#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready +#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRADC register. +// +//***************************************************************************** +#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready +#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRACMP register. +// +//***************************************************************************** +#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0 + // Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRPWM register. +// +//***************************************************************************** +#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready +#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRQEI register. +// +//***************************************************************************** +#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready +#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PREEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_PRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Peripheral Ready +#define SYSCTL_PRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Peripheral Ready +#define SYSCTL_PRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Peripheral Ready +#define SYSCTL_PRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Peripheral Ready +#define SYSCTL_PRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Peripheral Ready +#define SYSCTL_PRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_STAT register. +// +//***************************************************************************** +#define UDMA_STAT_DMACHANS_M 0x001F0000 // Available uDMA Channels Minus 1 +#define UDMA_STAT_STATE_M 0x000000F0 // Control State Machine Status +#define UDMA_STAT_STATE_IDLE 0x00000000 // Idle +#define UDMA_STAT_STATE_RD_CTRL 0x00000010 // Reading channel controller data +#define UDMA_STAT_STATE_RD_SRCENDP \ + 0x00000020 // Reading source end pointer +#define UDMA_STAT_STATE_RD_DSTENDP \ + 0x00000030 // Reading destination end pointer +#define UDMA_STAT_STATE_RD_SRCDAT \ + 0x00000040 // Reading source data +#define UDMA_STAT_STATE_WR_DSTDAT \ + 0x00000050 // Writing destination data +#define UDMA_STAT_STATE_WAIT 0x00000060 // Waiting for uDMA request to + // clear +#define UDMA_STAT_STATE_WR_CTRL 0x00000070 // Writing channel controller data +#define UDMA_STAT_STATE_STALL 0x00000080 // Stalled +#define UDMA_STAT_STATE_DONE 0x00000090 // Done +#define UDMA_STAT_STATE_UNDEF 0x000000A0 // Undefined +#define UDMA_STAT_MASTEN 0x00000001 // Master Enable Status +#define UDMA_STAT_DMACHANS_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CFG register. +// +//***************************************************************************** +#define UDMA_CFG_MASTEN 0x00000001 // Controller Master Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CTLBASE register. +// +//***************************************************************************** +#define UDMA_CTLBASE_ADDR_M 0xFFFFFC00 // Channel Control Base Address +#define UDMA_CTLBASE_ADDR_S 10 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTBASE register. +// +//***************************************************************************** +#define UDMA_ALTBASE_ADDR_M 0xFFFFFFFF // Alternate Channel Address + // Pointer +#define UDMA_ALTBASE_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_WAITSTAT register. +// +//***************************************************************************** +#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF // Channel [n] Wait Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_SWREQ register. +// +//***************************************************************************** +#define UDMA_SWREQ_M 0xFFFFFFFF // Channel [n] Software Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTSET +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTSET_SET_M 0xFFFFFFFF // Channel [n] Useburst Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTCLR +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTCLR_CLR_M 0xFFFFFFFF // Channel [n] Useburst Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKSET +// register. +// +//***************************************************************************** +#define UDMA_REQMASKSET_SET_M 0xFFFFFFFF // Channel [n] Request Mask Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKCLR +// register. +// +//***************************************************************************** +#define UDMA_REQMASKCLR_CLR_M 0xFFFFFFFF // Channel [n] Request Mask Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENASET register. +// +//***************************************************************************** +#define UDMA_ENASET_SET_M 0xFFFFFFFF // Channel [n] Enable Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENACLR register. +// +//***************************************************************************** +#define UDMA_ENACLR_CLR_M 0xFFFFFFFF // Clear Channel [n] Enable Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTSET register. +// +//***************************************************************************** +#define UDMA_ALTSET_SET_M 0xFFFFFFFF // Channel [n] Alternate Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTCLR register. +// +//***************************************************************************** +#define UDMA_ALTCLR_CLR_M 0xFFFFFFFF // Channel [n] Alternate Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOSET register. +// +//***************************************************************************** +#define UDMA_PRIOSET_SET_M 0xFFFFFFFF // Channel [n] Priority Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOCLR register. +// +//***************************************************************************** +#define UDMA_PRIOCLR_CLR_M 0xFFFFFFFF // Channel [n] Priority Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ERRCLR register. +// +//***************************************************************************** +#define UDMA_ERRCLR_ERRCLR 0x00000001 // uDMA Bus Error Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHASGN register. +// +//***************************************************************************** +#define UDMA_CHASGN_M 0xFFFFFFFF // Channel [n] Assignment Select +#define UDMA_CHASGN_PRIMARY 0x00000000 // Use the primary channel + // assignment +#define UDMA_CHASGN_SECONDARY 0x00000001 // Use the secondary channel + // assignment + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHIS register. +// +//***************************************************************************** +#define UDMA_CHIS_M 0xFFFFFFFF // Channel [n] Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP0 register. +// +//***************************************************************************** +#define UDMA_CHMAP0_CH7SEL_M 0xF0000000 // uDMA Channel 7 Source Select +#define UDMA_CHMAP0_CH6SEL_M 0x0F000000 // uDMA Channel 6 Source Select +#define UDMA_CHMAP0_CH5SEL_M 0x00F00000 // uDMA Channel 5 Source Select +#define UDMA_CHMAP0_CH4SEL_M 0x000F0000 // uDMA Channel 4 Source Select +#define UDMA_CHMAP0_CH3SEL_M 0x0000F000 // uDMA Channel 3 Source Select +#define UDMA_CHMAP0_CH2SEL_M 0x00000F00 // uDMA Channel 2 Source Select +#define UDMA_CHMAP0_CH1SEL_M 0x000000F0 // uDMA Channel 1 Source Select +#define UDMA_CHMAP0_CH0SEL_M 0x0000000F // uDMA Channel 0 Source Select +#define UDMA_CHMAP0_CH7SEL_S 28 +#define UDMA_CHMAP0_CH6SEL_S 24 +#define UDMA_CHMAP0_CH5SEL_S 20 +#define UDMA_CHMAP0_CH4SEL_S 16 +#define UDMA_CHMAP0_CH3SEL_S 12 +#define UDMA_CHMAP0_CH2SEL_S 8 +#define UDMA_CHMAP0_CH1SEL_S 4 +#define UDMA_CHMAP0_CH0SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP1 register. +// +//***************************************************************************** +#define UDMA_CHMAP1_CH15SEL_M 0xF0000000 // uDMA Channel 15 Source Select +#define UDMA_CHMAP1_CH14SEL_M 0x0F000000 // uDMA Channel 14 Source Select +#define UDMA_CHMAP1_CH13SEL_M 0x00F00000 // uDMA Channel 13 Source Select +#define UDMA_CHMAP1_CH12SEL_M 0x000F0000 // uDMA Channel 12 Source Select +#define UDMA_CHMAP1_CH11SEL_M 0x0000F000 // uDMA Channel 11 Source Select +#define UDMA_CHMAP1_CH10SEL_M 0x00000F00 // uDMA Channel 10 Source Select +#define UDMA_CHMAP1_CH9SEL_M 0x000000F0 // uDMA Channel 9 Source Select +#define UDMA_CHMAP1_CH8SEL_M 0x0000000F // uDMA Channel 8 Source Select +#define UDMA_CHMAP1_CH15SEL_S 28 +#define UDMA_CHMAP1_CH14SEL_S 24 +#define UDMA_CHMAP1_CH13SEL_S 20 +#define UDMA_CHMAP1_CH12SEL_S 16 +#define UDMA_CHMAP1_CH11SEL_S 12 +#define UDMA_CHMAP1_CH10SEL_S 8 +#define UDMA_CHMAP1_CH9SEL_S 4 +#define UDMA_CHMAP1_CH8SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP2 register. +// +//***************************************************************************** +#define UDMA_CHMAP2_CH23SEL_M 0xF0000000 // uDMA Channel 23 Source Select +#define UDMA_CHMAP2_CH22SEL_M 0x0F000000 // uDMA Channel 22 Source Select +#define UDMA_CHMAP2_CH21SEL_M 0x00F00000 // uDMA Channel 21 Source Select +#define UDMA_CHMAP2_CH20SEL_M 0x000F0000 // uDMA Channel 20 Source Select +#define UDMA_CHMAP2_CH19SEL_M 0x0000F000 // uDMA Channel 19 Source Select +#define UDMA_CHMAP2_CH18SEL_M 0x00000F00 // uDMA Channel 18 Source Select +#define UDMA_CHMAP2_CH17SEL_M 0x000000F0 // uDMA Channel 17 Source Select +#define UDMA_CHMAP2_CH16SEL_M 0x0000000F // uDMA Channel 16 Source Select +#define UDMA_CHMAP2_CH23SEL_S 28 +#define UDMA_CHMAP2_CH22SEL_S 24 +#define UDMA_CHMAP2_CH21SEL_S 20 +#define UDMA_CHMAP2_CH20SEL_S 16 +#define UDMA_CHMAP2_CH19SEL_S 12 +#define UDMA_CHMAP2_CH18SEL_S 8 +#define UDMA_CHMAP2_CH17SEL_S 4 +#define UDMA_CHMAP2_CH16SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP3 register. +// +//***************************************************************************** +#define UDMA_CHMAP3_CH31SEL_M 0xF0000000 // uDMA Channel 31 Source Select +#define UDMA_CHMAP3_CH30SEL_M 0x0F000000 // uDMA Channel 30 Source Select +#define UDMA_CHMAP3_CH29SEL_M 0x00F00000 // uDMA Channel 29 Source Select +#define UDMA_CHMAP3_CH28SEL_M 0x000F0000 // uDMA Channel 28 Source Select +#define UDMA_CHMAP3_CH27SEL_M 0x0000F000 // uDMA Channel 27 Source Select +#define UDMA_CHMAP3_CH26SEL_M 0x00000F00 // uDMA Channel 26 Source Select +#define UDMA_CHMAP3_CH25SEL_M 0x000000F0 // uDMA Channel 25 Source Select +#define UDMA_CHMAP3_CH24SEL_M 0x0000000F // uDMA Channel 24 Source Select +#define UDMA_CHMAP3_CH31SEL_S 28 +#define UDMA_CHMAP3_CH30SEL_S 24 +#define UDMA_CHMAP3_CH29SEL_S 20 +#define UDMA_CHMAP3_CH28SEL_S 16 +#define UDMA_CHMAP3_CH27SEL_S 12 +#define UDMA_CHMAP3_CH26SEL_S 8 +#define UDMA_CHMAP3_CH25SEL_S 4 +#define UDMA_CHMAP3_CH24SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_SRCENDP register. +// +//***************************************************************************** +#define UDMA_SRCENDP_ADDR_M 0xFFFFFFFF // Source Address End Pointer +#define UDMA_SRCENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_DSTENDP register. +// +//***************************************************************************** +#define UDMA_DSTENDP_ADDR_M 0xFFFFFFFF // Destination Address End Pointer +#define UDMA_DSTENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_CHCTL register. +// +//***************************************************************************** +#define UDMA_CHCTL_DSTINC_M 0xC0000000 // Destination Address Increment +#define UDMA_CHCTL_DSTINC_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTINC_16 0x40000000 // Half-word +#define UDMA_CHCTL_DSTINC_32 0x80000000 // Word +#define UDMA_CHCTL_DSTINC_NONE 0xC0000000 // No increment +#define UDMA_CHCTL_DSTSIZE_M 0x30000000 // Destination Data Size +#define UDMA_CHCTL_DSTSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTSIZE_16 0x10000000 // Half-word +#define UDMA_CHCTL_DSTSIZE_32 0x20000000 // Word +#define UDMA_CHCTL_SRCINC_M 0x0C000000 // Source Address Increment +#define UDMA_CHCTL_SRCINC_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCINC_16 0x04000000 // Half-word +#define UDMA_CHCTL_SRCINC_32 0x08000000 // Word +#define UDMA_CHCTL_SRCINC_NONE 0x0C000000 // No increment +#define UDMA_CHCTL_SRCSIZE_M 0x03000000 // Source Data Size +#define UDMA_CHCTL_SRCSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCSIZE_16 0x01000000 // Half-word +#define UDMA_CHCTL_SRCSIZE_32 0x02000000 // Word +#define UDMA_CHCTL_ARBSIZE_M 0x0003C000 // Arbitration Size +#define UDMA_CHCTL_ARBSIZE_1 0x00000000 // 1 Transfer +#define UDMA_CHCTL_ARBSIZE_2 0x00004000 // 2 Transfers +#define UDMA_CHCTL_ARBSIZE_4 0x00008000 // 4 Transfers +#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 // 8 Transfers +#define UDMA_CHCTL_ARBSIZE_16 0x00010000 // 16 Transfers +#define UDMA_CHCTL_ARBSIZE_32 0x00014000 // 32 Transfers +#define UDMA_CHCTL_ARBSIZE_64 0x00018000 // 64 Transfers +#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 // 128 Transfers +#define UDMA_CHCTL_ARBSIZE_256 0x00020000 // 256 Transfers +#define UDMA_CHCTL_ARBSIZE_512 0x00024000 // 512 Transfers +#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 // 1024 Transfers +#define UDMA_CHCTL_XFERSIZE_M 0x00003FF0 // Transfer Size (minus 1) +#define UDMA_CHCTL_NXTUSEBURST 0x00000008 // Next Useburst +#define UDMA_CHCTL_XFERMODE_M 0x00000007 // uDMA Transfer Mode +#define UDMA_CHCTL_XFERMODE_STOP \ + 0x00000000 // Stop +#define UDMA_CHCTL_XFERMODE_BASIC \ + 0x00000001 // Basic +#define UDMA_CHCTL_XFERMODE_AUTO \ + 0x00000002 // Auto-Request +#define UDMA_CHCTL_XFERMODE_PINGPONG \ + 0x00000003 // Ping-Pong +#define UDMA_CHCTL_XFERMODE_MEM_SG \ + 0x00000004 // Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_MEM_SGA \ + 0x00000005 // Alternate Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SG \ + 0x00000006 // Peripheral Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SGA \ + 0x00000007 // Alternate Peripheral + // Scatter-Gather +#define UDMA_CHCTL_XFERSIZE_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTLR register. +// +//***************************************************************************** +#define NVIC_ACTLR_DISOOFP 0x00000200 // Disable Out-Of-Order Floating + // Point +#define NVIC_ACTLR_DISFPCA 0x00000100 // Disable CONTROL +#define NVIC_ACTLR_DISFOLD 0x00000004 // Disable IT Folding +#define NVIC_ACTLR_DISWBUF 0x00000002 // Disable Write Buffer +#define NVIC_ACTLR_DISMCYC 0x00000001 // Disable Interrupts of Multiple + // Cycle Instructions + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CTRL register. +// +//***************************************************************************** +#define NVIC_ST_CTRL_COUNT 0x00010000 // Count Flag +#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source +#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt Enable +#define NVIC_ST_CTRL_ENABLE 0x00000001 // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_RELOAD register. +// +//***************************************************************************** +#define NVIC_ST_RELOAD_M 0x00FFFFFF // Reload Value +#define NVIC_ST_RELOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CURRENT +// register. +// +//***************************************************************************** +#define NVIC_ST_CURRENT_M 0x00FFFFFF // Current Value +#define NVIC_ST_CURRENT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN0 register. +// +//***************************************************************************** +#define NVIC_EN0_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN1 register. +// +//***************************************************************************** +#define NVIC_EN1_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN2 register. +// +//***************************************************************************** +#define NVIC_EN2_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN3 register. +// +//***************************************************************************** +#define NVIC_EN3_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN4 register. +// +//***************************************************************************** +#define NVIC_EN4_INT_M 0x000007FF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS0 register. +// +//***************************************************************************** +#define NVIC_DIS0_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS1 register. +// +//***************************************************************************** +#define NVIC_DIS1_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS2 register. +// +//***************************************************************************** +#define NVIC_DIS2_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS3 register. +// +//***************************************************************************** +#define NVIC_DIS3_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS4 register. +// +//***************************************************************************** +#define NVIC_DIS4_INT_M 0x000007FF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND0 register. +// +//***************************************************************************** +#define NVIC_PEND0_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND1 register. +// +//***************************************************************************** +#define NVIC_PEND1_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND2 register. +// +//***************************************************************************** +#define NVIC_PEND2_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND3 register. +// +//***************************************************************************** +#define NVIC_PEND3_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND4 register. +// +//***************************************************************************** +#define NVIC_PEND4_INT_M 0x000007FF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND0 register. +// +//***************************************************************************** +#define NVIC_UNPEND0_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND1 register. +// +//***************************************************************************** +#define NVIC_UNPEND1_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND2 register. +// +//***************************************************************************** +#define NVIC_UNPEND2_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND3 register. +// +//***************************************************************************** +#define NVIC_UNPEND3_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND4 register. +// +//***************************************************************************** +#define NVIC_UNPEND4_INT_M 0x000007FF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE0 register. +// +//***************************************************************************** +#define NVIC_ACTIVE0_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE1 register. +// +//***************************************************************************** +#define NVIC_ACTIVE1_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE2 register. +// +//***************************************************************************** +#define NVIC_ACTIVE2_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE3 register. +// +//***************************************************************************** +#define NVIC_ACTIVE3_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE4 register. +// +//***************************************************************************** +#define NVIC_ACTIVE4_INT_M 0x000007FF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI0 register. +// +//***************************************************************************** +#define NVIC_PRI0_INT3_M 0xE0000000 // Interrupt 3 Priority Mask +#define NVIC_PRI0_INT2_M 0x00E00000 // Interrupt 2 Priority Mask +#define NVIC_PRI0_INT1_M 0x0000E000 // Interrupt 1 Priority Mask +#define NVIC_PRI0_INT0_M 0x000000E0 // Interrupt 0 Priority Mask +#define NVIC_PRI0_INT3_S 29 +#define NVIC_PRI0_INT2_S 21 +#define NVIC_PRI0_INT1_S 13 +#define NVIC_PRI0_INT0_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI1 register. +// +//***************************************************************************** +#define NVIC_PRI1_INT7_M 0xE0000000 // Interrupt 7 Priority Mask +#define NVIC_PRI1_INT6_M 0x00E00000 // Interrupt 6 Priority Mask +#define NVIC_PRI1_INT5_M 0x0000E000 // Interrupt 5 Priority Mask +#define NVIC_PRI1_INT4_M 0x000000E0 // Interrupt 4 Priority Mask +#define NVIC_PRI1_INT7_S 29 +#define NVIC_PRI1_INT6_S 21 +#define NVIC_PRI1_INT5_S 13 +#define NVIC_PRI1_INT4_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI2 register. +// +//***************************************************************************** +#define NVIC_PRI2_INT11_M 0xE0000000 // Interrupt 11 Priority Mask +#define NVIC_PRI2_INT10_M 0x00E00000 // Interrupt 10 Priority Mask +#define NVIC_PRI2_INT9_M 0x0000E000 // Interrupt 9 Priority Mask +#define NVIC_PRI2_INT8_M 0x000000E0 // Interrupt 8 Priority Mask +#define NVIC_PRI2_INT11_S 29 +#define NVIC_PRI2_INT10_S 21 +#define NVIC_PRI2_INT9_S 13 +#define NVIC_PRI2_INT8_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI3 register. +// +//***************************************************************************** +#define NVIC_PRI3_INT15_M 0xE0000000 // Interrupt 15 Priority Mask +#define NVIC_PRI3_INT14_M 0x00E00000 // Interrupt 14 Priority Mask +#define NVIC_PRI3_INT13_M 0x0000E000 // Interrupt 13 Priority Mask +#define NVIC_PRI3_INT12_M 0x000000E0 // Interrupt 12 Priority Mask +#define NVIC_PRI3_INT15_S 29 +#define NVIC_PRI3_INT14_S 21 +#define NVIC_PRI3_INT13_S 13 +#define NVIC_PRI3_INT12_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI4 register. +// +//***************************************************************************** +#define NVIC_PRI4_INT19_M 0xE0000000 // Interrupt 19 Priority Mask +#define NVIC_PRI4_INT18_M 0x00E00000 // Interrupt 18 Priority Mask +#define NVIC_PRI4_INT17_M 0x0000E000 // Interrupt 17 Priority Mask +#define NVIC_PRI4_INT16_M 0x000000E0 // Interrupt 16 Priority Mask +#define NVIC_PRI4_INT19_S 29 +#define NVIC_PRI4_INT18_S 21 +#define NVIC_PRI4_INT17_S 13 +#define NVIC_PRI4_INT16_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI5 register. +// +//***************************************************************************** +#define NVIC_PRI5_INT23_M 0xE0000000 // Interrupt 23 Priority Mask +#define NVIC_PRI5_INT22_M 0x00E00000 // Interrupt 22 Priority Mask +#define NVIC_PRI5_INT21_M 0x0000E000 // Interrupt 21 Priority Mask +#define NVIC_PRI5_INT20_M 0x000000E0 // Interrupt 20 Priority Mask +#define NVIC_PRI5_INT23_S 29 +#define NVIC_PRI5_INT22_S 21 +#define NVIC_PRI5_INT21_S 13 +#define NVIC_PRI5_INT20_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI6 register. +// +//***************************************************************************** +#define NVIC_PRI6_INT27_M 0xE0000000 // Interrupt 27 Priority Mask +#define NVIC_PRI6_INT26_M 0x00E00000 // Interrupt 26 Priority Mask +#define NVIC_PRI6_INT25_M 0x0000E000 // Interrupt 25 Priority Mask +#define NVIC_PRI6_INT24_M 0x000000E0 // Interrupt 24 Priority Mask +#define NVIC_PRI6_INT27_S 29 +#define NVIC_PRI6_INT26_S 21 +#define NVIC_PRI6_INT25_S 13 +#define NVIC_PRI6_INT24_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI7 register. +// +//***************************************************************************** +#define NVIC_PRI7_INT31_M 0xE0000000 // Interrupt 31 Priority Mask +#define NVIC_PRI7_INT30_M 0x00E00000 // Interrupt 30 Priority Mask +#define NVIC_PRI7_INT29_M 0x0000E000 // Interrupt 29 Priority Mask +#define NVIC_PRI7_INT28_M 0x000000E0 // Interrupt 28 Priority Mask +#define NVIC_PRI7_INT31_S 29 +#define NVIC_PRI7_INT30_S 21 +#define NVIC_PRI7_INT29_S 13 +#define NVIC_PRI7_INT28_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI8 register. +// +//***************************************************************************** +#define NVIC_PRI8_INT35_M 0xE0000000 // Interrupt 35 Priority Mask +#define NVIC_PRI8_INT34_M 0x00E00000 // Interrupt 34 Priority Mask +#define NVIC_PRI8_INT33_M 0x0000E000 // Interrupt 33 Priority Mask +#define NVIC_PRI8_INT32_M 0x000000E0 // Interrupt 32 Priority Mask +#define NVIC_PRI8_INT35_S 29 +#define NVIC_PRI8_INT34_S 21 +#define NVIC_PRI8_INT33_S 13 +#define NVIC_PRI8_INT32_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI9 register. +// +//***************************************************************************** +#define NVIC_PRI9_INT39_M 0xE0000000 // Interrupt 39 Priority Mask +#define NVIC_PRI9_INT38_M 0x00E00000 // Interrupt 38 Priority Mask +#define NVIC_PRI9_INT37_M 0x0000E000 // Interrupt 37 Priority Mask +#define NVIC_PRI9_INT36_M 0x000000E0 // Interrupt 36 Priority Mask +#define NVIC_PRI9_INT39_S 29 +#define NVIC_PRI9_INT38_S 21 +#define NVIC_PRI9_INT37_S 13 +#define NVIC_PRI9_INT36_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI10 register. +// +//***************************************************************************** +#define NVIC_PRI10_INT43_M 0xE0000000 // Interrupt 43 Priority Mask +#define NVIC_PRI10_INT42_M 0x00E00000 // Interrupt 42 Priority Mask +#define NVIC_PRI10_INT41_M 0x0000E000 // Interrupt 41 Priority Mask +#define NVIC_PRI10_INT40_M 0x000000E0 // Interrupt 40 Priority Mask +#define NVIC_PRI10_INT43_S 29 +#define NVIC_PRI10_INT42_S 21 +#define NVIC_PRI10_INT41_S 13 +#define NVIC_PRI10_INT40_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI11 register. +// +//***************************************************************************** +#define NVIC_PRI11_INT47_M 0xE0000000 // Interrupt 47 Priority Mask +#define NVIC_PRI11_INT46_M 0x00E00000 // Interrupt 46 Priority Mask +#define NVIC_PRI11_INT45_M 0x0000E000 // Interrupt 45 Priority Mask +#define NVIC_PRI11_INT44_M 0x000000E0 // Interrupt 44 Priority Mask +#define NVIC_PRI11_INT47_S 29 +#define NVIC_PRI11_INT46_S 21 +#define NVIC_PRI11_INT45_S 13 +#define NVIC_PRI11_INT44_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI12 register. +// +//***************************************************************************** +#define NVIC_PRI12_INT51_M 0xE0000000 // Interrupt 51 Priority Mask +#define NVIC_PRI12_INT50_M 0x00E00000 // Interrupt 50 Priority Mask +#define NVIC_PRI12_INT49_M 0x0000E000 // Interrupt 49 Priority Mask +#define NVIC_PRI12_INT48_M 0x000000E0 // Interrupt 48 Priority Mask +#define NVIC_PRI12_INT51_S 29 +#define NVIC_PRI12_INT50_S 21 +#define NVIC_PRI12_INT49_S 13 +#define NVIC_PRI12_INT48_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI13 register. +// +//***************************************************************************** +#define NVIC_PRI13_INT55_M 0xE0000000 // Interrupt 55 Priority Mask +#define NVIC_PRI13_INT54_M 0x00E00000 // Interrupt 54 Priority Mask +#define NVIC_PRI13_INT53_M 0x0000E000 // Interrupt 53 Priority Mask +#define NVIC_PRI13_INT52_M 0x000000E0 // Interrupt 52 Priority Mask +#define NVIC_PRI13_INT55_S 29 +#define NVIC_PRI13_INT54_S 21 +#define NVIC_PRI13_INT53_S 13 +#define NVIC_PRI13_INT52_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI14 register. +// +//***************************************************************************** +#define NVIC_PRI14_INTD_M 0xE0000000 // Interrupt 59 Priority Mask +#define NVIC_PRI14_INTC_M 0x00E00000 // Interrupt 58 Priority Mask +#define NVIC_PRI14_INTB_M 0x0000E000 // Interrupt 57 Priority Mask +#define NVIC_PRI14_INTA_M 0x000000E0 // Interrupt 56 Priority Mask +#define NVIC_PRI14_INTD_S 29 +#define NVIC_PRI14_INTC_S 21 +#define NVIC_PRI14_INTB_S 13 +#define NVIC_PRI14_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI15 register. +// +//***************************************************************************** +#define NVIC_PRI15_INTD_M 0xE0000000 // Interrupt 63 Priority Mask +#define NVIC_PRI15_INTC_M 0x00E00000 // Interrupt 62 Priority Mask +#define NVIC_PRI15_INTB_M 0x0000E000 // Interrupt 61 Priority Mask +#define NVIC_PRI15_INTA_M 0x000000E0 // Interrupt 60 Priority Mask +#define NVIC_PRI15_INTD_S 29 +#define NVIC_PRI15_INTC_S 21 +#define NVIC_PRI15_INTB_S 13 +#define NVIC_PRI15_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI16 register. +// +//***************************************************************************** +#define NVIC_PRI16_INTD_M 0xE0000000 // Interrupt 67 Priority Mask +#define NVIC_PRI16_INTC_M 0x00E00000 // Interrupt 66 Priority Mask +#define NVIC_PRI16_INTB_M 0x0000E000 // Interrupt 65 Priority Mask +#define NVIC_PRI16_INTA_M 0x000000E0 // Interrupt 64 Priority Mask +#define NVIC_PRI16_INTD_S 29 +#define NVIC_PRI16_INTC_S 21 +#define NVIC_PRI16_INTB_S 13 +#define NVIC_PRI16_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI17 register. +// +//***************************************************************************** +#define NVIC_PRI17_INTD_M 0xE0000000 // Interrupt 71 Priority Mask +#define NVIC_PRI17_INTC_M 0x00E00000 // Interrupt 70 Priority Mask +#define NVIC_PRI17_INTB_M 0x0000E000 // Interrupt 69 Priority Mask +#define NVIC_PRI17_INTA_M 0x000000E0 // Interrupt 68 Priority Mask +#define NVIC_PRI17_INTD_S 29 +#define NVIC_PRI17_INTC_S 21 +#define NVIC_PRI17_INTB_S 13 +#define NVIC_PRI17_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI18 register. +// +//***************************************************************************** +#define NVIC_PRI18_INTD_M 0xE0000000 // Interrupt 75 Priority Mask +#define NVIC_PRI18_INTC_M 0x00E00000 // Interrupt 74 Priority Mask +#define NVIC_PRI18_INTB_M 0x0000E000 // Interrupt 73 Priority Mask +#define NVIC_PRI18_INTA_M 0x000000E0 // Interrupt 72 Priority Mask +#define NVIC_PRI18_INTD_S 29 +#define NVIC_PRI18_INTC_S 21 +#define NVIC_PRI18_INTB_S 13 +#define NVIC_PRI18_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI19 register. +// +//***************************************************************************** +#define NVIC_PRI19_INTD_M 0xE0000000 // Interrupt 79 Priority Mask +#define NVIC_PRI19_INTC_M 0x00E00000 // Interrupt 78 Priority Mask +#define NVIC_PRI19_INTB_M 0x0000E000 // Interrupt 77 Priority Mask +#define NVIC_PRI19_INTA_M 0x000000E0 // Interrupt 76 Priority Mask +#define NVIC_PRI19_INTD_S 29 +#define NVIC_PRI19_INTC_S 21 +#define NVIC_PRI19_INTB_S 13 +#define NVIC_PRI19_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI20 register. +// +//***************************************************************************** +#define NVIC_PRI20_INTD_M 0xE0000000 // Interrupt 83 Priority Mask +#define NVIC_PRI20_INTC_M 0x00E00000 // Interrupt 82 Priority Mask +#define NVIC_PRI20_INTB_M 0x0000E000 // Interrupt 81 Priority Mask +#define NVIC_PRI20_INTA_M 0x000000E0 // Interrupt 80 Priority Mask +#define NVIC_PRI20_INTD_S 29 +#define NVIC_PRI20_INTC_S 21 +#define NVIC_PRI20_INTB_S 13 +#define NVIC_PRI20_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI21 register. +// +//***************************************************************************** +#define NVIC_PRI21_INTD_M 0xE0000000 // Interrupt 87 Priority Mask +#define NVIC_PRI21_INTC_M 0x00E00000 // Interrupt 86 Priority Mask +#define NVIC_PRI21_INTB_M 0x0000E000 // Interrupt 85 Priority Mask +#define NVIC_PRI21_INTA_M 0x000000E0 // Interrupt 84 Priority Mask +#define NVIC_PRI21_INTD_S 29 +#define NVIC_PRI21_INTC_S 21 +#define NVIC_PRI21_INTB_S 13 +#define NVIC_PRI21_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI22 register. +// +//***************************************************************************** +#define NVIC_PRI22_INTD_M 0xE0000000 // Interrupt 91 Priority Mask +#define NVIC_PRI22_INTC_M 0x00E00000 // Interrupt 90 Priority Mask +#define NVIC_PRI22_INTB_M 0x0000E000 // Interrupt 89 Priority Mask +#define NVIC_PRI22_INTA_M 0x000000E0 // Interrupt 88 Priority Mask +#define NVIC_PRI22_INTD_S 29 +#define NVIC_PRI22_INTC_S 21 +#define NVIC_PRI22_INTB_S 13 +#define NVIC_PRI22_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI23 register. +// +//***************************************************************************** +#define NVIC_PRI23_INTD_M 0xE0000000 // Interrupt 95 Priority Mask +#define NVIC_PRI23_INTC_M 0x00E00000 // Interrupt 94 Priority Mask +#define NVIC_PRI23_INTB_M 0x0000E000 // Interrupt 93 Priority Mask +#define NVIC_PRI23_INTA_M 0x000000E0 // Interrupt 92 Priority Mask +#define NVIC_PRI23_INTD_S 29 +#define NVIC_PRI23_INTC_S 21 +#define NVIC_PRI23_INTB_S 13 +#define NVIC_PRI23_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI24 register. +// +//***************************************************************************** +#define NVIC_PRI24_INTD_M 0xE0000000 // Interrupt 99 Priority Mask +#define NVIC_PRI24_INTC_M 0x00E00000 // Interrupt 98 Priority Mask +#define NVIC_PRI24_INTB_M 0x0000E000 // Interrupt 97 Priority Mask +#define NVIC_PRI24_INTA_M 0x000000E0 // Interrupt 96 Priority Mask +#define NVIC_PRI24_INTD_S 29 +#define NVIC_PRI24_INTC_S 21 +#define NVIC_PRI24_INTB_S 13 +#define NVIC_PRI24_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI25 register. +// +//***************************************************************************** +#define NVIC_PRI25_INTD_M 0xE0000000 // Interrupt 103 Priority Mask +#define NVIC_PRI25_INTC_M 0x00E00000 // Interrupt 102 Priority Mask +#define NVIC_PRI25_INTB_M 0x0000E000 // Interrupt 101 Priority Mask +#define NVIC_PRI25_INTA_M 0x000000E0 // Interrupt 100 Priority Mask +#define NVIC_PRI25_INTD_S 29 +#define NVIC_PRI25_INTC_S 21 +#define NVIC_PRI25_INTB_S 13 +#define NVIC_PRI25_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI26 register. +// +//***************************************************************************** +#define NVIC_PRI26_INTD_M 0xE0000000 // Interrupt 107 Priority Mask +#define NVIC_PRI26_INTC_M 0x00E00000 // Interrupt 106 Priority Mask +#define NVIC_PRI26_INTB_M 0x0000E000 // Interrupt 105 Priority Mask +#define NVIC_PRI26_INTA_M 0x000000E0 // Interrupt 104 Priority Mask +#define NVIC_PRI26_INTD_S 29 +#define NVIC_PRI26_INTC_S 21 +#define NVIC_PRI26_INTB_S 13 +#define NVIC_PRI26_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI27 register. +// +//***************************************************************************** +#define NVIC_PRI27_INTD_M 0xE0000000 // Interrupt 111 Priority Mask +#define NVIC_PRI27_INTC_M 0x00E00000 // Interrupt 110 Priority Mask +#define NVIC_PRI27_INTB_M 0x0000E000 // Interrupt 109 Priority Mask +#define NVIC_PRI27_INTA_M 0x000000E0 // Interrupt 108 Priority Mask +#define NVIC_PRI27_INTD_S 29 +#define NVIC_PRI27_INTC_S 21 +#define NVIC_PRI27_INTB_S 13 +#define NVIC_PRI27_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI28 register. +// +//***************************************************************************** +#define NVIC_PRI28_INTD_M 0xE0000000 // Interrupt 115 Priority Mask +#define NVIC_PRI28_INTC_M 0x00E00000 // Interrupt 114 Priority Mask +#define NVIC_PRI28_INTB_M 0x0000E000 // Interrupt 113 Priority Mask +#define NVIC_PRI28_INTA_M 0x000000E0 // Interrupt 112 Priority Mask +#define NVIC_PRI28_INTD_S 29 +#define NVIC_PRI28_INTC_S 21 +#define NVIC_PRI28_INTB_S 13 +#define NVIC_PRI28_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI29 register. +// +//***************************************************************************** +#define NVIC_PRI29_INTD_M 0xE0000000 // Interrupt 119 Priority Mask +#define NVIC_PRI29_INTC_M 0x00E00000 // Interrupt 118 Priority Mask +#define NVIC_PRI29_INTB_M 0x0000E000 // Interrupt 117 Priority Mask +#define NVIC_PRI29_INTA_M 0x000000E0 // Interrupt 116 Priority Mask +#define NVIC_PRI29_INTD_S 29 +#define NVIC_PRI29_INTC_S 21 +#define NVIC_PRI29_INTB_S 13 +#define NVIC_PRI29_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI30 register. +// +//***************************************************************************** +#define NVIC_PRI30_INTD_M 0xE0000000 // Interrupt 123 Priority Mask +#define NVIC_PRI30_INTC_M 0x00E00000 // Interrupt 122 Priority Mask +#define NVIC_PRI30_INTB_M 0x0000E000 // Interrupt 121 Priority Mask +#define NVIC_PRI30_INTA_M 0x000000E0 // Interrupt 120 Priority Mask +#define NVIC_PRI30_INTD_S 29 +#define NVIC_PRI30_INTC_S 21 +#define NVIC_PRI30_INTB_S 13 +#define NVIC_PRI30_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI31 register. +// +//***************************************************************************** +#define NVIC_PRI31_INTD_M 0xE0000000 // Interrupt 127 Priority Mask +#define NVIC_PRI31_INTC_M 0x00E00000 // Interrupt 126 Priority Mask +#define NVIC_PRI31_INTB_M 0x0000E000 // Interrupt 125 Priority Mask +#define NVIC_PRI31_INTA_M 0x000000E0 // Interrupt 124 Priority Mask +#define NVIC_PRI31_INTD_S 29 +#define NVIC_PRI31_INTC_S 21 +#define NVIC_PRI31_INTB_S 13 +#define NVIC_PRI31_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI32 register. +// +//***************************************************************************** +#define NVIC_PRI32_INTD_M 0xE0000000 // Interrupt 131 Priority Mask +#define NVIC_PRI32_INTC_M 0x00E00000 // Interrupt 130 Priority Mask +#define NVIC_PRI32_INTB_M 0x0000E000 // Interrupt 129 Priority Mask +#define NVIC_PRI32_INTA_M 0x000000E0 // Interrupt 128 Priority Mask +#define NVIC_PRI32_INTD_S 29 +#define NVIC_PRI32_INTC_S 21 +#define NVIC_PRI32_INTB_S 13 +#define NVIC_PRI32_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI33 register. +// +//***************************************************************************** +#define NVIC_PRI33_INTD_M 0xE0000000 // Interrupt Priority for Interrupt + // [4n+3] +#define NVIC_PRI33_INTC_M 0x00E00000 // Interrupt Priority for Interrupt + // [4n+2] +#define NVIC_PRI33_INTB_M 0x0000E000 // Interrupt Priority for Interrupt + // [4n+1] +#define NVIC_PRI33_INTA_M 0x000000E0 // Interrupt Priority for Interrupt + // [4n] +#define NVIC_PRI33_INTD_S 29 +#define NVIC_PRI33_INTC_S 21 +#define NVIC_PRI33_INTB_S 13 +#define NVIC_PRI33_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI34 register. +// +//***************************************************************************** +#define NVIC_PRI34_INTD_M 0xE0000000 // Interrupt Priority for Interrupt + // [4n+3] +#define NVIC_PRI34_INTC_M 0x00E00000 // Interrupt Priority for Interrupt + // [4n+2] +#define NVIC_PRI34_INTB_M 0x0000E000 // Interrupt Priority for Interrupt + // [4n+1] +#define NVIC_PRI34_INTA_M 0x000000E0 // Interrupt Priority for Interrupt + // [4n] +#define NVIC_PRI34_INTD_S 29 +#define NVIC_PRI34_INTC_S 21 +#define NVIC_PRI34_INTB_S 13 +#define NVIC_PRI34_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPUID register. +// +//***************************************************************************** +#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer Code +#define NVIC_CPUID_IMP_ARM 0x41000000 // ARM +#define NVIC_CPUID_VAR_M 0x00F00000 // Variant Number +#define NVIC_CPUID_CON_M 0x000F0000 // Constant +#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Part Number +#define NVIC_CPUID_PARTNO_CM4 0x0000C240 // Cortex-M4 processor +#define NVIC_CPUID_REV_M 0x0000000F // Revision Number + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_CTRL register. +// +//***************************************************************************** +#define NVIC_INT_CTRL_NMI_SET 0x80000000 // NMI Set Pending +#define NVIC_INT_CTRL_PEND_SV 0x10000000 // PendSV Set Pending +#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // PendSV Clear Pending +#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // SysTick Set Pending +#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // SysTick Clear Pending +#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug Interrupt Handling +#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Interrupt Pending +#define NVIC_INT_CTRL_VEC_PEN_M 0x000FF000 // Interrupt Pending Vector Number +#define NVIC_INT_CTRL_VEC_PEN_NMI \ + 0x00002000 // NMI +#define NVIC_INT_CTRL_VEC_PEN_HARD \ + 0x00003000 // Hard fault +#define NVIC_INT_CTRL_VEC_PEN_MEM \ + 0x00004000 // Memory management fault +#define NVIC_INT_CTRL_VEC_PEN_BUS \ + 0x00005000 // Bus fault +#define NVIC_INT_CTRL_VEC_PEN_USG \ + 0x00006000 // Usage fault +#define NVIC_INT_CTRL_VEC_PEN_SVC \ + 0x0000B000 // SVCall +#define NVIC_INT_CTRL_VEC_PEN_PNDSV \ + 0x0000E000 // PendSV +#define NVIC_INT_CTRL_VEC_PEN_TICK \ + 0x0000F000 // SysTick +#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to Base +#define NVIC_INT_CTRL_VEC_ACT_M 0x000000FF // Interrupt Pending Vector Number +#define NVIC_INT_CTRL_VEC_ACT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_VTABLE register. +// +//***************************************************************************** +#define NVIC_VTABLE_OFFSET_M 0xFFFFFC00 // Vector Table Offset +#define NVIC_VTABLE_OFFSET_S 10 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_APINT register. +// +//***************************************************************************** +#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Register Key +#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key +#define NVIC_APINT_ENDIANESS 0x00008000 // Data Endianess +#define NVIC_APINT_PRIGROUP_M 0x00000700 // Interrupt Priority Grouping +#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split +#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split +#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split +#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split +#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split +#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split +#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split +#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split +#define NVIC_APINT_SYSRESETREQ 0x00000004 // System Reset Request +#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear Active NMI / Fault +#define NVIC_APINT_VECT_RESET 0x00000001 // System Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_CTRL register. +// +//***************************************************************************** +#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wake Up on Pending +#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep Sleep Enable +#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR Exit + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CFG_CTRL register. +// +//***************************************************************************** +#define NVIC_CFG_CTRL_STKALIGN 0x00000200 // Stack Alignment on Exception + // Entry +#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore Bus Fault in NMI and + // Fault +#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on Divide by 0 +#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on Unaligned Access +#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow Main Interrupt Trigger +#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread State Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI1 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI1_USAGE_M 0x00E00000 // Usage Fault Priority +#define NVIC_SYS_PRI1_BUS_M 0x0000E000 // Bus Fault Priority +#define NVIC_SYS_PRI1_MEM_M 0x000000E0 // Memory Management Fault Priority +#define NVIC_SYS_PRI1_USAGE_S 21 +#define NVIC_SYS_PRI1_BUS_S 13 +#define NVIC_SYS_PRI1_MEM_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI2 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI2_SVC_M 0xE0000000 // SVCall Priority +#define NVIC_SYS_PRI2_SVC_S 29 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI3 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI3_TICK_M 0xE0000000 // SysTick Exception Priority +#define NVIC_SYS_PRI3_PENDSV_M 0x00E00000 // PendSV Priority +#define NVIC_SYS_PRI3_DEBUG_M 0x000000E0 // Debug Priority +#define NVIC_SYS_PRI3_TICK_S 29 +#define NVIC_SYS_PRI3_PENDSV_S 21 +#define NVIC_SYS_PRI3_DEBUG_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL +// register. +// +//***************************************************************************** +#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage Fault Enable +#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus Fault Enable +#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Memory Management Fault Enable +#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVC Call Pending +#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus Fault Pending +#define NVIC_SYS_HND_CTRL_MEMP 0x00002000 // Memory Management Fault Pending +#define NVIC_SYS_HND_CTRL_USAGEP \ + 0x00001000 // Usage Fault Pending +#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // SysTick Exception Active +#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV Exception Active +#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Debug Monitor Active +#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVC Call Active +#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage Fault Active +#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus Fault Active +#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Memory Management Fault Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide-by-Zero Usage Fault +#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned Access Usage Fault +#define NVIC_FAULT_STAT_NOCP 0x00080000 // No Coprocessor Usage Fault +#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC Load Usage Fault +#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid State Usage Fault +#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined Instruction Usage + // Fault +#define NVIC_FAULT_STAT_BFARV 0x00008000 // Bus Fault Address Register Valid +#define NVIC_FAULT_STAT_BLSPERR 0x00002000 // Bus Fault on Floating-Point Lazy + // State Preservation +#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack Bus Fault +#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack Bus Fault +#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise Data Bus Error +#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise Data Bus Error +#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction Bus Error +#define NVIC_FAULT_STAT_MMARV 0x00000080 // Memory Management Fault Address + // Register Valid +#define NVIC_FAULT_STAT_MLSPERR 0x00000020 // Memory Management Fault on + // Floating-Point Lazy State + // Preservation +#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack Access Violation +#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack Access Violation +#define NVIC_FAULT_STAT_DERR 0x00000002 // Data Access Violation +#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction Access Violation + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_HFAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug Event +#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Forced Hard Fault +#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector Table Read Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DEBUG_STAT +// register. +// +//***************************************************************************** +#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted +#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch +#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match +#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction +#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MM_ADDR register. +// +//***************************************************************************** +#define NVIC_MM_ADDR_M 0xFFFFFFFF // Fault Address +#define NVIC_MM_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_ADDR +// register. +// +//***************************************************************************** +#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Fault Address +#define NVIC_FAULT_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPAC register. +// +//***************************************************************************** +#define NVIC_CPAC_CP11_M 0x00C00000 // CP11 Coprocessor Access + // Privilege +#define NVIC_CPAC_CP11_DIS 0x00000000 // Access Denied +#define NVIC_CPAC_CP11_PRIV 0x00400000 // Privileged Access Only +#define NVIC_CPAC_CP11_FULL 0x00C00000 // Full Access +#define NVIC_CPAC_CP10_M 0x00300000 // CP10 Coprocessor Access + // Privilege +#define NVIC_CPAC_CP10_DIS 0x00000000 // Access Denied +#define NVIC_CPAC_CP10_PRIV 0x00100000 // Privileged Access Only +#define NVIC_CPAC_CP10_FULL 0x00300000 // Full Access + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_TYPE register. +// +//***************************************************************************** +#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I Regions +#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D Regions +#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or Unified MPU +#define NVIC_MPU_TYPE_IREGION_S 16 +#define NVIC_MPU_TYPE_DREGION_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_CTRL register. +// +//***************************************************************************** +#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU Default Region +#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU Enabled During Faults +#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_NUMBER +// register. +// +//***************************************************************************** +#define NVIC_MPU_NUMBER_M 0x00000007 // MPU Region to Access +#define NVIC_MPU_NUMBER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE register. +// +//***************************************************************************** +#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE_ADDR_S 5 +#define NVIC_MPU_BASE_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable +#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable +#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable +#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE1 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE1_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE1_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE1_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE1_ADDR_S 5 +#define NVIC_MPU_BASE1_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR1 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR1_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR1_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR1_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR1_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR1_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR1_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR1_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR1_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR1_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE2 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE2_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE2_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE2_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE2_ADDR_S 5 +#define NVIC_MPU_BASE2_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR2 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR2_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR2_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR2_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR2_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR2_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR2_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR2_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR2_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR2_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE3 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE3_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE3_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE3_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE3_ADDR_S 5 +#define NVIC_MPU_BASE3_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR3 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR3_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR3_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR3_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR3_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR3_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR3_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR3_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR3_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR3_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_CTRL register. +// +//***************************************************************************** +#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask +#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key +#define NVIC_DBG_CTRL_S_RESET_ST \ + 0x02000000 // Core has reset since last read +#define NVIC_DBG_CTRL_S_RETIRE_ST \ + 0x01000000 // Core has executed insruction + // since last read +#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up +#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping +#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt +#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available +#define NVIC_DBG_CTRL_C_SNAPSTALL \ + 0x00000020 // Breaks a stalled load/store +#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping +#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core +#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core +#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_XFER register. +// +//***************************************************************************** +#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read +#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register +#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0 +#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1 +#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2 +#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3 +#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4 +#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5 +#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6 +#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7 +#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8 +#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9 +#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10 +#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11 +#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12 +#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13 +#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14 +#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15 +#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register +#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP +#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP +#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP +#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_DATA register. +// +//***************************************************************************** +#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache +#define NVIC_DBG_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_INT register. +// +//***************************************************************************** +#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault +#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors +#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error +#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state +#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check +#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error +#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault +#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status +#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset +#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending +#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SW_TRIG register. +// +//***************************************************************************** +#define NVIC_SW_TRIG_INTID_M 0x000000FF // Interrupt ID +#define NVIC_SW_TRIG_INTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPCC register. +// +//***************************************************************************** +#define NVIC_FPCC_ASPEN 0x80000000 // Automatic State Preservation + // Enable +#define NVIC_FPCC_LSPEN 0x40000000 // Lazy State Preservation Enable +#define NVIC_FPCC_MONRDY 0x00000100 // Monitor Ready +#define NVIC_FPCC_BFRDY 0x00000040 // Bus Fault Ready +#define NVIC_FPCC_MMRDY 0x00000020 // Memory Management Fault Ready +#define NVIC_FPCC_HFRDY 0x00000010 // Hard Fault Ready +#define NVIC_FPCC_THREAD 0x00000008 // Thread Mode +#define NVIC_FPCC_USER 0x00000002 // User Privilege Level +#define NVIC_FPCC_LSPACT 0x00000001 // Lazy State Preservation Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPCA register. +// +//***************************************************************************** +#define NVIC_FPCA_ADDRESS_M 0xFFFFFFF8 // Address +#define NVIC_FPCA_ADDRESS_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPDSC register. +// +//***************************************************************************** +#define NVIC_FPDSC_AHP 0x04000000 // AHP Bit Default +#define NVIC_FPDSC_DN 0x02000000 // DN Bit Default +#define NVIC_FPDSC_FZ 0x01000000 // FZ Bit Default +#define NVIC_FPDSC_RMODE_M 0x00C00000 // RMODE Bit Default +#define NVIC_FPDSC_RMODE_RN 0x00000000 // Round to Nearest (RN) mode +#define NVIC_FPDSC_RMODE_RP 0x00400000 // Round towards Plus Infinity (RP) + // mode +#define NVIC_FPDSC_RMODE_RM 0x00800000 // Round towards Minus Infinity + // (RM) mode +#define NVIC_FPDSC_RMODE_RZ 0x00C00000 // Round towards Zero (RZ) mode + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED +#define SYSCTL_DID0_CLASS_BLIZZARD \ + 0x00050000 // Tiva(TM) C Series TM4C123-class + // microcontrollers + +#endif + +#endif // __TM4C123GH6PM_H__ diff --git a/Blink/tm4c123gh6pm_startup_ccs.c b/Blink/tm4c123gh6pm_startup_ccs.c new file mode 100644 index 0000000..a8f43e7 --- /dev/null +++ b/Blink/tm4c123gh6pm_startup_ccs.c @@ -0,0 +1,300 @@ +//***************************************************************************** +// +// Startup code for use with TI's Code Composer Studio. +// +// Copyright (c) 2011-2014 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Software License Agreement +// +// Texas Instruments (TI) is supplying this software for use solely and +// exclusively on TI's microcontroller products. The software is owned by +// TI and/or its suppliers, and is protected under applicable copyright +// laws. You may not combine this software with "viral" open-source +// software in order to form a larger program. +// +// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. +// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT +// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY +// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL +// DAMAGES, FOR ANY REASON WHATSOEVER. +// +//***************************************************************************** + +#include + +//***************************************************************************** +// +// Forward declaration of the default fault handlers. +// +//***************************************************************************** +void ResetISR(void); +static void NmiSR(void); +static void FaultISR(void); +static void IntDefaultHandler(void); + +//***************************************************************************** +// +// External declaration for the reset handler that is to be called when the +// processor is started +// +//***************************************************************************** +extern void _c_int00(void); + +//***************************************************************************** +// +// Linker variable that marks the top of the stack. +// +//***************************************************************************** +extern uint32_t __STACK_TOP; + +//***************************************************************************** +// +// External declarations for the interrupt handlers used by the application. +// +//***************************************************************************** +// To be added by user + +//***************************************************************************** +// +// The vector table. Note that the proper constructs must be placed on this to +// ensure that it ends up at physical address 0x0000.0000 or at the start of +// the program if located at a start address other than 0. +// +//***************************************************************************** +#pragma DATA_SECTION(g_pfnVectors, ".intvecs") +void (* const g_pfnVectors[])(void) = +{ + (void (*)(void))((uint32_t)&__STACK_TOP), + // The initial stack pointer + ResetISR, // The reset handler + NmiSR, // The NMI handler + FaultISR, // The hard fault handler + IntDefaultHandler, // The MPU fault handler + IntDefaultHandler, // The bus fault handler + IntDefaultHandler, // The usage fault handler + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // SVCall handler + IntDefaultHandler, // Debug monitor handler + 0, // Reserved + IntDefaultHandler, // The PendSV handler + IntDefaultHandler, // The SysTick handler + IntDefaultHandler, // GPIO Port A + IntDefaultHandler, // GPIO Port B + IntDefaultHandler, // GPIO Port C + IntDefaultHandler, // GPIO Port D + IntDefaultHandler, // GPIO Port E + IntDefaultHandler, // UART0 Rx and Tx + IntDefaultHandler, // UART1 Rx and Tx + IntDefaultHandler, // SSI0 Rx and Tx + IntDefaultHandler, // I2C0 Master and Slave + IntDefaultHandler, // PWM Fault + IntDefaultHandler, // PWM Generator 0 + IntDefaultHandler, // PWM Generator 1 + IntDefaultHandler, // PWM Generator 2 + IntDefaultHandler, // Quadrature Encoder 0 + IntDefaultHandler, // ADC Sequence 0 + IntDefaultHandler, // ADC Sequence 1 + IntDefaultHandler, // ADC Sequence 2 + IntDefaultHandler, // ADC Sequence 3 + IntDefaultHandler, // Watchdog timer + IntDefaultHandler, // Timer 0 subtimer A + IntDefaultHandler, // Timer 0 subtimer B + IntDefaultHandler, // Timer 1 subtimer A + IntDefaultHandler, // Timer 1 subtimer B + IntDefaultHandler, // Timer 2 subtimer A + IntDefaultHandler, // Timer 2 subtimer B + IntDefaultHandler, // Analog Comparator 0 + IntDefaultHandler, // Analog Comparator 1 + IntDefaultHandler, // Analog Comparator 2 + IntDefaultHandler, // System Control (PLL, OSC, BO) + IntDefaultHandler, // FLASH Control + IntDefaultHandler, // GPIO Port F + IntDefaultHandler, // GPIO Port G + IntDefaultHandler, // GPIO Port H + IntDefaultHandler, // UART2 Rx and Tx + IntDefaultHandler, // SSI1 Rx and Tx + IntDefaultHandler, // Timer 3 subtimer A + IntDefaultHandler, // Timer 3 subtimer B + IntDefaultHandler, // I2C1 Master and Slave + IntDefaultHandler, // Quadrature Encoder 1 + IntDefaultHandler, // CAN0 + IntDefaultHandler, // CAN1 + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // Hibernate + IntDefaultHandler, // USB0 + IntDefaultHandler, // PWM Generator 3 + IntDefaultHandler, // uDMA Software Transfer + IntDefaultHandler, // uDMA Error + IntDefaultHandler, // ADC1 Sequence 0 + IntDefaultHandler, // ADC1 Sequence 1 + IntDefaultHandler, // ADC1 Sequence 2 + IntDefaultHandler, // ADC1 Sequence 3 + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // GPIO Port J + IntDefaultHandler, // GPIO Port K + IntDefaultHandler, // GPIO Port L + IntDefaultHandler, // SSI2 Rx and Tx + IntDefaultHandler, // SSI3 Rx and Tx + IntDefaultHandler, // UART3 Rx and Tx + IntDefaultHandler, // UART4 Rx and Tx + IntDefaultHandler, // UART5 Rx and Tx + IntDefaultHandler, // UART6 Rx and Tx + IntDefaultHandler, // UART7 Rx and Tx + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // I2C2 Master and Slave + IntDefaultHandler, // I2C3 Master and Slave + IntDefaultHandler, // Timer 4 subtimer A + IntDefaultHandler, // Timer 4 subtimer B + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // Timer 5 subtimer A + IntDefaultHandler, // Timer 5 subtimer B + IntDefaultHandler, // Wide Timer 0 subtimer A + IntDefaultHandler, // Wide Timer 0 subtimer B + IntDefaultHandler, // Wide Timer 1 subtimer A + IntDefaultHandler, // Wide Timer 1 subtimer B + IntDefaultHandler, // Wide Timer 2 subtimer A + IntDefaultHandler, // Wide Timer 2 subtimer B + IntDefaultHandler, // Wide Timer 3 subtimer A + IntDefaultHandler, // Wide Timer 3 subtimer B + IntDefaultHandler, // Wide Timer 4 subtimer A + IntDefaultHandler, // Wide Timer 4 subtimer B + IntDefaultHandler, // Wide Timer 5 subtimer A + IntDefaultHandler, // Wide Timer 5 subtimer B + IntDefaultHandler, // FPU + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // I2C4 Master and Slave + IntDefaultHandler, // I2C5 Master and Slave + IntDefaultHandler, // GPIO Port M + IntDefaultHandler, // GPIO Port N + IntDefaultHandler, // Quadrature Encoder 2 + 0, // Reserved + 0, // Reserved + IntDefaultHandler, // GPIO Port P (Summary or P0) + IntDefaultHandler, // GPIO Port P1 + IntDefaultHandler, // GPIO Port P2 + IntDefaultHandler, // GPIO Port P3 + IntDefaultHandler, // GPIO Port P4 + IntDefaultHandler, // GPIO Port P5 + IntDefaultHandler, // GPIO Port P6 + IntDefaultHandler, // GPIO Port P7 + IntDefaultHandler, // GPIO Port Q (Summary or Q0) + IntDefaultHandler, // GPIO Port Q1 + IntDefaultHandler, // GPIO Port Q2 + IntDefaultHandler, // GPIO Port Q3 + IntDefaultHandler, // GPIO Port Q4 + IntDefaultHandler, // GPIO Port Q5 + IntDefaultHandler, // GPIO Port Q6 + IntDefaultHandler, // GPIO Port Q7 + IntDefaultHandler, // GPIO Port R + IntDefaultHandler, // GPIO Port S + IntDefaultHandler, // PWM 1 Generator 0 + IntDefaultHandler, // PWM 1 Generator 1 + IntDefaultHandler, // PWM 1 Generator 2 + IntDefaultHandler, // PWM 1 Generator 3 + IntDefaultHandler // PWM 1 Fault +}; + +//***************************************************************************** +// +// This is the code that gets called when the processor first starts execution +// following a reset event. Only the absolutely necessary set is performed, +// after which the application supplied entry() routine is called. Any fancy +// actions (such as making decisions based on the reset cause register, and +// resetting the bits in that register) are left solely in the hands of the +// application. +// +//***************************************************************************** +void +ResetISR(void) +{ + // + // Jump to the CCS C initialization routine. This will enable the + // floating-point unit as well, so that does not need to be done here. + // + __asm(" .global _c_int00\n" + " b.w _c_int00"); +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a NMI. This +// simply enters an infinite loop, preserving the system state for examination +// by a debugger. +// +//***************************************************************************** +static void +NmiSR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives a fault +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +FaultISR(void) +{ + // + // Enter an infinite loop. + // + while(1) + { + } +} + +//***************************************************************************** +// +// This is the code that gets called when the processor receives an unexpected +// interrupt. This simply enters an infinite loop, preserving the system state +// for examination by a debugger. +// +//***************************************************************************** +static void +IntDefaultHandler(void) +{ + // + // Go into an infinite loop. + // + while(1) + { + } +}