49 lines
2.5 KiB
Plaintext
49 lines
2.5 KiB
Plaintext
Name: Lokesh
|
|
|
|
1. Question text:
|
|
Design a system using this Honeywell ammonia sensor (https://drive.google.com/file/d/164WvPD7GauvseOfH-K3v8iZ4YYmQFkq-/view?usp=sharing )
|
|
to detect when ammonia concentration in ambient atmosphere exceeds 100 ppm an alert an operator in a control room about 100m away.
|
|
This device will be mounted in various sections of an industrial processing plant. The complete plant will need a fairly large number (~20)
|
|
of sensors so unit costs needs to be kept under control. Also, once mounted it will be very difficult to remove/service/repair the sensing devices.
|
|
|
|
2. Design summary:
|
|
Your design is well thought out. Using the cascaded power supply for local boards and wireless link to control room is also a good point.
|
|
In reality you will have to check if the industry allows wireless, which bands, or whether they want some MODbus type system.
|
|
One major issue in your design is that you are using a FET as the frontend - how will you account for variations in the FET gm? Each board
|
|
will have a different gain which you need to calibrate. Similarly each sensor has a different gain and sensitivity which you need to calibrate,
|
|
you should have mentioned that.
|
|
|
|
|
|
3. Block diagram
|
|
Block diagram is fine.
|
|
Some details are missing - for example what are the protocols / signal levels between the boards?
|
|
What happens when multiple sensors go off - are there some ways to tell the control room wchich sensors have gone off?
|
|
Or how many?
|
|
|
|
|
|
4. Power supply design
|
|
Why have you chosen a rectifier supply? Can you not choose an off the shelf switching sypply?
|
|
Are you gonig to supply different PSU for every different voltage level in industry?
|
|
|
|
5. Industrial Design:
|
|
Mostly ok - dimensioning could be better. Also, are there wires coming out of the box?
|
|
Or are there connectors on the edge? or are there some cable glands?
|
|
|
|
6. KICAD Design
|
|
Schematic:
|
|
Major flaw in circuit design - your 5V regulated is not ground referenced. So any noise / disturbance in the power line will make it into the output.
|
|
|
|
PCB:
|
|
Board outline is missing and DRC fails
|
|
Why mix SMT and THT components? Also interesting that your THT components are on the back. Why?
|
|
Some unconnected stubs on your board - e.g.
|
|
it is good that you have used only 2 mounting holes.
|
|
|
|
7. Pricing / Assembly
|
|
Your BOM/Pricing is a little strange - why have you listed 21 LDOs byt only 2 FETS?
|
|
You need one FET and one op-amp per sensor right?
|
|
Where is the sensor cost?
|
|
What about items on the control room side?
|
|
"Protection system is wireless" ...> What is the protection system here?
|
|
|