commit
b402d448be
262 changed files with 10132 additions and 0 deletions
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
@ -0,0 +1,11 @@ |
|||
PCB(board)-50 |
|||
Soldering lead-70 |
|||
Assembly-1109 |
|||
Fabrication-1910 |
|||
LED-14 |
|||
Resistor 10k-2 |
|||
Resistor 1k-2 |
|||
Resistor 30k-2 |
|||
Resistor 110k-2 |
|||
Power regulator-60 |
|||
NPN transistor-16 |
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
@ -0,0 +1,14 @@ |
|||
A modern power supply is |
|||
essentially a DC-DC converter. |
|||
Therefore it first rectifies |
|||
the AC power from the wall |
|||
into DC.The nice thing about |
|||
Such a converter, is that it |
|||
can take a whole range of |
|||
input voltages and still |
|||
Output a constant 12v for our |
|||
Pc components.A cheaper power |
|||
Supply might use cheaper parts |
|||
in the primary side, which is |
|||
Why it will only be rated for |
|||
200-250v. |
|||
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
@ -0,0 +1,12 @@ |
|||
PCB(board)-50 |
|||
Soldering lead-70 |
|||
Assembly-1109 |
|||
Fabrication-1910 |
|||
LED-14 |
|||
Resistor-10k-2 |
|||
Resistor-1k-2 |
|||
Resistor-30k-2 |
|||
Resistor-110k-2 |
|||
Capacitor-1nano farad(C102)-2 |
|||
Power regulator-60 |
|||
NPN transistor-16 |
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,13 @@ |
|||
Components: |
|||
555 Timer IC |
|||
BC547 NPN Transistor |
|||
1k 0.25-watt Resistors |
|||
22k 0.25-watt Resistors |
|||
180k 0.25-watt Resistor |
|||
1M 0.25-watt Resistors |
|||
LED 1.5V 5-mm |
|||
1N4007 Diode |
|||
100nF (104) Capacitor |
|||
12V SPDT Relay |
|||
Connectors & IC base |
|||
Zero PCB or card board |
|||
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,5 @@ |
|||
Industrial Design Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Show (with labelled and dimensioned sketches) how your product will look (in the final form) as delivered to the end user. Include the enclosure, mounting etc as necessary. |
|||
* Explain in a few words what the enclosure is made of. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,12 @@ |
|||
Complete your entire design in Kicad, including: |
|||
|
|||
* Circuit / schematic design: |
|||
|
|||
* Make sure to assign the appropriate values / ratings for each component. When you select components make sure they exist on a commercial electronic platform (e.g. some are listed here: https://gitea.iitdh.ac.in/PEG/PEG-Wiki/wiki/PurchasingComponents) |
|||
* Assign appropriate footprints to each component |
|||
* Make sure to run the Electrical Rule Checker before moving to the layout. |
|||
|
|||
* PCB Layout design |
|||
|
|||
When you are done, export the design as a SINGLE ZIP FILE (File > Archive) and then upload the zip file here. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
@ -0,0 +1,17 @@ |
|||
6 x 8 cm Universal PCB Prototype Board Double-Side X 1 - Rs. 49 ( pcb fabrication) |
|||
assembly Rs 0.8 per board |
|||
100nF capacitor - Rs. 3 |
|||
NE555DR - Rs. 10 (approx.) |
|||
Resistor - approx Rs 2 , each . total: Rs. 14 |
|||
12v relay (EC-6576) - Rs. 67 |
|||
BC547: Rs. 3.72, 1N4007 - Rs 1.13 |
|||
PCB Box Plastic Enclosure: 100 per prototype |
|||
Led 3mm X 5mm Rs. 17.88 |
|||
Board Size (mm): 106 X 42 |
|||
PCB Fabrication : Rs 894 |
|||
PCB Assembly: Rs 1918 |
|||
Board Thickness (mm): 1.6mm 2 layers |
|||
Surface finish: HAL lead-free |
|||
|
|||
Total cost of two prototypes: Rs 5907 /- (approx.) |
|||
|
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,5 @@ |
|||
Industrial Design Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Show (with labelled and dimensioned sketches) how your product will look (in the final form) as delivered to the end user. Include the enclosure, mounting etc as necessary. |
|||
* Explain in a few words what the enclosure is made of. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,12 @@ |
|||
Complete your entire design in Kicad, including: |
|||
|
|||
* Circuit / schematic design: |
|||
|
|||
* Make sure to assign the appropriate values / ratings for each component. When you select components make sure they exist on a commercial electronic platform (e.g. some are listed here: https://gitea.iitdh.ac.in/PEG/PEG-Wiki/wiki/PurchasingComponents) |
|||
* Assign appropriate footprints to each component |
|||
* Make sure to run the Electrical Rule Checker before moving to the layout. |
|||
|
|||
* PCB Layout design |
|||
|
|||
When you are done, export the design as a SINGLE ZIP FILE (File > Archive) and then upload the zip file here. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
@ -0,0 +1,6 @@ |
|||
Please look at exel sheet uploaded in the last question |
|||
The uploaded sheet may have some issues due to sheets-exel conversion so please refer to the link |
|||
|
|||
sheets link: |
|||
|
|||
https://docs.google.com/spreadsheets/d/1AprGaciXm09LeOWvp2QEofeByYA_MI5t7lMScfl2eMk/edit?usp=sharing |
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,5 @@ |
|||
Industrial Design Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Show (with labelled and dimensioned sketches) how your product will look (in the final form) as delivered to the end user. Include the enclosure, mounting etc as necessary. |
|||
* Explain in a few words what the enclosure is made of. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,12 @@ |
|||
Complete your entire design in Kicad, including: |
|||
|
|||
* Circuit / schematic design: |
|||
|
|||
* Make sure to assign the appropriate values / ratings for each component. When you select components make sure they exist on a commercial electronic platform (e.g. some are listed here: https://gitea.iitdh.ac.in/PEG/PEG-Wiki/wiki/PurchasingComponents) |
|||
* Assign appropriate footprints to each component |
|||
* Make sure to run the Electrical Rule Checker before moving to the layout. |
|||
|
|||
* PCB Layout design |
|||
|
|||
When you are done, export the design as a SINGLE ZIP FILE (File > Archive) and then upload the zip file here. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
@ -0,0 +1,4 @@ |
|||
around 6000 (INR)on rough estimate + cost of fitting. |
|||
We exclude cost of pump. |
|||
And I dont know why my PCB is not loading from semantic and its staying blank probably due to something I added in semantic but its passing the tests. |
|||
Hoping that is considered partially and you can also try that as I could not figure out the issue. |
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,12 @@ |
|||
Complete your entire design in Kicad, including: |
|||
|
|||
* Circuit / schematic design: |
|||
|
|||
* Make sure to assign the appropriate values / ratings for each component. When you select components make sure they exist on a commercial electronic platform (e.g. some are listed here: https://gitea.iitdh.ac.in/PEG/PEG-Wiki/wiki/PurchasingComponents) |
|||
* Assign appropriate footprints to each component |
|||
* Make sure to run the Electrical Rule Checker before moving to the layout. |
|||
|
|||
* PCB Layout design |
|||
|
|||
When you are done, export the design as a SINGLE ZIP FILE (File > Archive) and then upload the zip file here. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
@ -0,0 +1,13 @@ |
|||
Components: |
|||
|
|||
Since most of the components are bought through mouser shipping and custom charges will be included extra. (Assuming 30% extra then material cost given in online store) = 6930 Rs. (and 40% of the cost is just 2 arduinos, Lol chip shortage is real) |
|||
|
|||
PCB Printing: |
|||
I used pcbway estimator to calculate the cost (https://www.pcbway.com/HighQualityOrderOnline.aspx) |
|||
My board is 58mm x 38 mm, 2 layer => $ 116 ~ Rs 8900 |
|||
|
|||
Assembly: |
|||
All the components are either through hole or 0805 package, hence it can he hand soldered. Assuming this assembly charges will be only the soldering lead and consumables used. Hence Rs.250 can be accounted for assembly. |
|||
|
|||
Miscellaneous costs: (transport and other stimulus need) Rs 1000 |
|||
Total Cost for 2 prototypes = Rs. 17080 |
|||
@ -0,0 +1 @@ |
|||
You need to make two prototypes of your product. Estimate how much it might cost to build two prototypes (give a breakup of cost across components, PCB, assembly, fabrication, etc). |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
@ -0,0 +1,5 @@ |
|||
Industrial Design Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Show (with labelled and dimensioned sketches) how your product will look (in the final form) as delivered to the end user. Include the enclosure, mounting etc as necessary. |
|||
* Explain in a few words what the enclosure is made of. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,12 @@ |
|||
Complete your entire design in Kicad, including: |
|||
|
|||
* Circuit / schematic design: |
|||
|
|||
* Make sure to assign the appropriate values / ratings for each component. When you select components make sure they exist on a commercial electronic platform (e.g. some are listed here: https://gitea.iitdh.ac.in/PEG/PEG-Wiki/wiki/PurchasingComponents) |
|||
* Assign appropriate footprints to each component |
|||
* Make sure to run the Electrical Rule Checker before moving to the layout. |
|||
|
|||
* PCB Layout design |
|||
|
|||
When you are done, export the design as a SINGLE ZIP FILE (File > Archive) and then upload the zip file here. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the Bill of materials (BOM) spreadsheet as a single XLS file. The spreadsheet should contain the following columns, at a minimum: |
|||
|
|||
* Reference designation * Part number * Value / Ratings |
|||
Binary file not shown.
@ -0,0 +1,4 @@ |
|||
Design Summary (add text in the box below or upload a PDF) |
|||
Explain how you approach this design problem. |
|||
Include your assumptions, trade-offs, with any and all design choices you make. |
|||
|
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Upload the block diagram of the system you have designed as a single PDF. |
|||
|
|||
Hand drawn diagram is acceptable - just make sure it is neat and clearly labelled. Mark all interfaces. Make sure to include suitable power supply/supplies. |
|||
Binary file not shown.
@ -0,0 +1,3 @@ |
|||
Power Supply Summary (add text in the box below or upload a PDF. Handwritten+scanned is acceptable as long as it is neat and legible.) |
|||
|
|||
* Explain your choice of your power supply. * Explain how your power supply works. Include circuit diagrams, waveforms and graphs as needed. |
|||
Binary file not shown.
Some files were not shown because too many files changed in this diff
Loading…
Reference in new issue