Group21_Project/main.c

#include <stdint.h>
#include <stdbool.h>
#include "tm4c123gh6pm.h"

void GPIO_PORT_F_init(void)
{
    SYSCTL_RCGC2_R |= 0x00000020;             // ENABLE CLOCK TO GPIOF
    GPIO_PORTF_LOCK_R = 0x4C4F434B;           // UNLOCK COMMIT REGISTER
    GPIO_PORTF_CR_R   = 0x1F;                 // MAKE PORTF0 CONFIGURABLE
    GPIO_PORTF_DEN_R  = 0x1F;                 // SET PORTF DIGITAL ENABLE
    GPIO_PORTF_DIR_R  = 0x0E;                 // SET PF0, PF4 as input and PF1, PF2 and PF3 as output
    GPIO_PORTF_PUR_R  = 0x11;                 // PORTF PF0 and PF4 IS PULLED UP

}


void GPIO_PORT_B_init(void)
{
    SYSCTL_RCGCGPIO_R |= 0x02;                // ENABLE CLOCK FOR GPIOB
    SYSCTL_RCGCUART_R |= 0x02;                // ENABLE CLOCK FOR UART1

    GPIO_PORTB_DEN_R |= 0x03;                 // DIGITAL ENABLE FOR PB0 AND PB1
    GPIO_PORTB_AFSEL_R |= 0x03;               // ENABLE ALTERNATE FUNCTION ON PB0,PB1

    GPIO_PORTB_PCTL_R = (GPIO_PORTB_PCTL_R & 0xFFFFFF00) | 0x00000011; // Set PB0, PB1 for UART

    UART1_CTL_R &= ~0x01;                     // DISABLE UART1 DURING SETUP
    UART1_IBRD_R = 104;                       // Set integer part of baud rate (for 9600 baud at 16 MHz clock)
    UART1_FBRD_R = 11;                        // Set fractional part of baud rate
    UART1_LCRH_R = 0x60;                      // 8-bit, No parity, 1 stop bit
    UART1_CC_R = 0x00;                        // Use system clock

    UART1_CTL_R |= 0x301;                     // Enable UART1, RX, and TX

}

char UART1_READ(void)
{
    while (UART1_FR_R & 0x10);                // Wait until RX FIFO is not empty
    return (char)UART1_DR_R;                  // Return received data
}