109 lines
5.5 KiB
C
109 lines
5.5 KiB
C
#include <stdint.h>
|
|
#include "tm4c123gh6pm.h"
|
|
|
|
#define STCTRL *((volatile uint32_t *) 0xE000E010) // STATUS AND CONTROL REGISTER
|
|
#define STRELOAD *((volatile uint32_t *) 0xE000E014) // RELOAD VALUE REGISTER
|
|
#define STCURRENT *((volatile uint32_t *) 0xE000E018) // CURRENT VALUE REGISTER
|
|
|
|
#define ENABLE (1 << 0) // ENABLE TIMER BY SETTING BIT 0 OF CSR
|
|
#define CLKINT (1 << 2) // SPECIFY CPU CLOCK
|
|
#define CLOCK_HZ 16000000 // CLOCK FREQUENCY
|
|
#define SYSTICK_RELOAD_VALUE(us) ((CLOCK_HZ / 1000000) * (us) - 1) // SYSTICK RELOAD VALUE CONVERSION IN MICROSECONDS
|
|
|
|
void I2C0_init(void) {
|
|
SYSCTL_RCGCI2C_R |= 0x01; // I2C0 CLOCK ENABLE
|
|
SYSCTL_RCGCGPIO_R |= 0x02; // GPIO PORTB CLOCK ENABLE
|
|
|
|
while ((SYSCTL_PRGPIO_R & 0x02) == 0)
|
|
{ // DELAY TO ENSURE CLOCK IS STABILIZED
|
|
};
|
|
|
|
GPIO_PORTB_AFSEL_R |= 0x0C; // ENABLE ALERNATE FUNCTION FOR PB2 AND PB3
|
|
GPIO_PORTB_ODR_R |= 0x08; // ENABLE OPEN DRAIN ON SDA
|
|
GPIO_PORTB_DEN_R |= 0x0C; // ENABLE DIGITAL FOR PB2 AND PB3
|
|
GPIO_PORTB_PCTL_R &= ~0xFF00; // CLEAR PCTL
|
|
GPIO_PORTB_PCTL_R |= 0x3300; // I2C FUNCTIONALITY FOR PB2 AND PB3
|
|
|
|
I2C0_MCR_R = 0x10; // I2C MASTER FUNCTION INITIALIZE
|
|
I2C0_MTPR_R = 0x07; // SET CLOCK
|
|
}
|
|
|
|
void I2C0_SEND(uint8_t PERIPHERAL_ADDRESS, uint8_t ANALOG_SAMPLE_MSB, uint8_t ANALOG_SAMPLE_LSB) // DEFINE I2C0 SEND FUNCTION TO PERIPHERAL ADDRESS AND 12 BIT DATA
|
|
{
|
|
I2C0_MSA_R = (PERIPHERAL_ADDRESS << 1); // SET PERIPHERAL ADDRESS, WRITE
|
|
I2C0_MDR_R = ANALOG_SAMPLE_MSB; // MSB
|
|
I2C0_MCS_R = 0x03; // SEND START AND RUN
|
|
while (I2C0_MCS_R & 0x01); // WAIT FOR TRANSMISSION TO FINISH
|
|
if (I2C0_MCS_R & 0x02) return; // RETURN IF ERROR OCCURS
|
|
|
|
I2C0_MDR_R = ANALOG_SAMPLE_LSB; // LSB
|
|
I2C0_MCS_R = 0x05; // SEND START AND RUN
|
|
while (I2C0_MCS_R & 0x01); // WAIT FOR TRANSMISSION TO FINISH
|
|
if (I2C0_MCS_R & 0x02) return; // RETURN IF ERROR OCCURS
|
|
}
|
|
|
|
|
|
void systick_setting(void)
|
|
{
|
|
STRELOAD = SYSTICK_RELOAD_VALUE(1000); // RELOAD VALUE FOR 1mS
|
|
STCTRL |= ENABLE | CLKINT; // ENABLE SYSTICK WITH SYSTEM CLOCK
|
|
STCURRENT = 0; // CLEAR STCURRENT REGUSTER
|
|
}
|
|
|
|
void delay(int us)
|
|
{
|
|
STRELOAD = SYSTICK_RELOAD_VALUE(us); // RELOAD VALUE FOR REQUIRED DELAY
|
|
STCURRENT = 0; // CLEAR STCURRENT
|
|
STCTRL |= ENABLE | CLKINT; // ENABLE SYSTICK WITH SYSTEM CLOCK
|
|
while ((STCTRL & (1 << 16)) == 0); // WAIT FOR FLAG TO SET
|
|
STCTRL &= ~ENABLE; // STOP TIMER
|
|
}
|
|
|
|
#define MCP4725_ADDRESS 0x60 // PERIPHERAL I2C ADDRESS
|
|
|
|
void AOUT(uint16_t ANALOG_SAMPLE)
|
|
{
|
|
uint8_t ANALOG_SAMPLE_MSB = (ANALOG_SAMPLE >> 8) & 0x0F; // TAKE UPPER 4 BITS OF 12 BIT DATA TO TRANSMIT
|
|
uint8_t ANALOG_SAMPLE_LSB = ANALOG_SAMPLE & 0xFF; // TAKE LOWER 8 BITS OF 12 BIT DATA TO TRANSMIT
|
|
|
|
I2C0_SEND(MCP4725_ADDRESS, ANALOG_SAMPLE_MSB, ANALOG_SAMPLE_LSB); // SEND 12 BIT DATA
|
|
}
|
|
|
|
int samples[100] = { // DECLARE WAVEFORM SHAPE
|
|
2252, 2436, 2594, 2722, 2819, 2886, 2925, 2942, 2942, 2933,
|
|
2922, 2916, 2921, 2940, 2977, 3031, 3101, 3185, 3276, 3371,
|
|
3463, 3547, 3619, 3675, 3714, 3735, 3739, 3729, 3709, 3682,
|
|
3652, 3622, 3594, 3570, 3547, 3525, 3499, 3466, 3420, 3356,
|
|
3271, 3161, 3025, 2863, 2678, 2473, 2255, 2031, 1808, 1596,
|
|
1401, 1229, 1085, 973, 891, 839, 812, 804, 809, 820,
|
|
829, 831, 819, 791, 746, 683, 606, 518, 424, 330,
|
|
241, 162, 98, 51, 21, 9, 12, 27, 51, 80,
|
|
111, 140, 166, 189, 211, 235, 264, 303, 357, 431,
|
|
528, 651, 800, 974, 1170, 1382, 1604, 1829, 2047, 2252 };
|
|
|
|
|
|
void WAVEFORM(void) // DEFINE ANALOG WAVEFORM TO GENERATE
|
|
{ int i; // DEFINE VARIABLE i
|
|
while (1)
|
|
{
|
|
for ( i=0; i< 100; i++) // TAKE EACH SAMPLE OUT OF 100 SAMPLES TO SEND TO PERIPHERAL
|
|
{
|
|
AOUT(samples[i]); // SEND ith SAMPLE TO PERIPHERAL
|
|
if (samples[i] > 4095) // RESET IF SAMPLE VALUE ABOVE MAXIMUM LIMIT
|
|
{ samples[i] = 0;
|
|
}
|
|
delay(1000); // DELAY TO CONTROL WAVEFORM FREQUENCY
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
int main(void)
|
|
{
|
|
systick_setting(); // SYSTICK SETUP
|
|
while (1)
|
|
{
|
|
WAVEFORM(); // WAVEFORM
|
|
}
|
|
}
|