DAMASK_EICMD/code/crystallite.f90

4085 lines
228 KiB
Fortran

!--------------------------------------------------------------------------------------------------
! $Id$
!--------------------------------------------------------------------------------------------------
!> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH
!> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH
!> @author Christoph Kords, Max-Planck-Institut für Eisenforschung GmbH
!> @brief crystallite state integration functions and reporting of results
!--------------------------------------------------------------------------------------------------
module crystallite
use prec, only: &
pReal, &
pInt
implicit none
private
character(len=64), dimension(:,:), allocatable, private :: &
crystallite_output !< name of each post result output
integer(pInt), public, protected :: &
crystallite_maxSizePostResults !< description not available
integer(pInt), dimension(:), allocatable, public, protected :: &
crystallite_sizePostResults !< description not available
integer(pInt), dimension(:,:), allocatable, private :: &
crystallite_sizePostResult !< description not available
real(pReal), dimension(:,:), allocatable, public :: &
crystallite_temperature !< temperature (same on all components on one IP)
real(pReal), dimension(:,:,:), allocatable, public, protected :: &
crystallite_heat !< heat source
real(pReal), dimension(:,:,:), allocatable, public :: &
crystallite_dt !< requested time increment of each grain
real(pReal), dimension(:,:,:), allocatable, private :: &
crystallite_subdt, & !< substepped time increment of each grain
crystallite_subFrac, & !< already calculated fraction of increment
crystallite_subStep !< size of next integration step
real(pReal), dimension(:,:,:,:), allocatable, public :: &
crystallite_Tstar_v, & !< current 2nd Piola-Kirchhoff stress vector (end of converged time step)
crystallite_Tstar0_v, & !< 2nd Piola-Kirchhoff stress vector at start of FE inc
crystallite_partionedTstar0_v !< 2nd Piola-Kirchhoff stress vector at start of homog inc
real(pReal), dimension(:,:,:,:), allocatable, private :: &
crystallite_subTstar0_v, & !< 2nd Piola-Kirchhoff stress vector at start of crystallite inc
crystallite_orientation, & !< orientation as quaternion
crystallite_orientation0, & !< initial orientation as quaternion
crystallite_rotation !< grain rotation away from initial orientation as axis-angle (in degrees) in crystal reference frame
real(pReal), dimension(:,:,:,:,:), allocatable, public :: &
crystallite_Fp, & !< current plastic def grad (end of converged time step)
crystallite_Fp0, & !< plastic def grad at start of FE inc
crystallite_partionedFp0,& !< plastic def grad at start of homog inc
crystallite_F0, & !< def grad at start of FE inc
crystallite_partionedF, & !< def grad to be reached at end of homog inc
crystallite_partionedF0, & !< def grad at start of homog inc
crystallite_Lp, & !< current plastic velocitiy grad (end of converged time step)
crystallite_Lp0, & !< plastic velocitiy grad at start of FE inc
crystallite_partionedLp0,& !< plastic velocity grad at start of homog inc
crystallite_P !< 1st Piola-Kirchhoff stress per grain
real(pReal), dimension(:,:,:,:,:), allocatable, private :: &
crystallite_Fe, & !< current "elastic" def grad (end of converged time step)
crystallite_subFe0,& !< "elastic" def grad at start of crystallite inc
crystallite_invFp, & !< inverse of current plastic def grad (end of converged time step)
crystallite_subFp0,& !< plastic def grad at start of crystallite inc
crystallite_subF, & !< def grad to be reached at end of crystallite inc
crystallite_subF0, & !< def grad at start of crystallite inc
crystallite_subLp0,& !< plastic velocity grad at start of crystallite inc
crystallite_disorientation !< disorientation between two neighboring ips (only calculated for single grain IPs)
real(pReal), dimension(:,:,:,:,:,:,:), allocatable, public :: &
crystallite_dPdF, & !< current individual dPdF per grain (end of converged time step)
crystallite_dPdF0, & !< individual dPdF per grain at start of FE inc
crystallite_partioneddPdF0 !< individual dPdF per grain at start of homog inc
real(pReal), dimension(:,:,:,:,:,:,:), allocatable, private :: &
crystallite_fallbackdPdF !< dPdF fallback for non-converged grains (elastic prediction)
logical, dimension(:,:,:), allocatable, public :: &
crystallite_requested !< flag to request crystallite calculation
logical, dimension(:,:,:), allocatable, public, protected :: &
crystallite_converged, & !< convergence flag
crystallite_localPlasticity !< indicates this grain to have purely local constitutive law
logical, dimension(:,:,:), allocatable, private :: &
crystallite_todo !< flag to indicate need for further computation
logical, dimension(:,:), allocatable, private :: &
crystallite_clearToWindForward, & !< description not available
crystallite_clearToCutback, & !< description not available
crystallite_syncSubFrac, & !< description not available
crystallite_syncSubFracCompleted, & !< description not available
crystallite_neighborEnforcedCutback !< description not available
enum, bind(c)
enumerator :: undefined_ID, &
phase_ID, &
texture_ID, &
volume_ID, &
grainrotationx_ID, &
grainrotationy_ID, &
grainrotationz_ID, &
heat_ID, &
orientation_ID, &
grainrotation_ID, &
eulerangles_ID, &
defgrad_ID, &
fe_ID, &
fp_ID, &
lp_ID, &
e_ID, &
ee_ID, &
p_ID, &
s_ID, &
elasmatrix_ID, &
neighboringip_ID, &
neighboringelement_ID
end enum
integer(kind(undefined_ID)),dimension(:,:), allocatable, private :: &
crystallite_outputID !< ID of each post result output
public :: &
crystallite_init, &
crystallite_stressAndItsTangent, &
crystallite_orientations, &
crystallite_postResults
private :: &
crystallite_integrateStateFPI, &
crystallite_integrateStateEuler, &
crystallite_integrateStateAdaptiveEuler, &
crystallite_integrateStateRK4, &
crystallite_integrateStateRKCK45, &
crystallite_integrateStress, &
crystallite_stateJump
contains
!--------------------------------------------------------------------------------------------------
!> @brief allocates and initialize per grain variables
!--------------------------------------------------------------------------------------------------
subroutine crystallite_init(temperature)
use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
use debug, only: &
debug_info, &
debug_reset, &
debug_level, &
debug_crystallite, &
debug_levelBasic
use numerics, only: &
usePingPong
use math, only: &
math_I3, &
math_EulerToR, &
math_inv33, &
math_transpose33, &
math_mul33xx33, &
math_mul33x33
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips, &
mesh_maxNipNeighbors
use IO, only: &
IO_read, &
IO_timeStamp, &
IO_open_jobFile_stat, &
IO_open_file, &
IO_lc, &
IO_getTag, &
IO_isBlank, &
IO_stringPos, &
IO_stringValue, &
IO_write_jobFile, &
IO_error, &
IO_EOF
use material
use lattice, only: &
lattice_structure
use constitutive, only: &
constitutive_microstructure ! derived (shortcut) quantities of given state
use constitutive_damage, only: &
constitutive_damage_microstructure
use constitutive_thermal, only: &
constitutive_thermal_microstructure
implicit none
real(pReal), intent(in) :: temperature
integer(pInt), parameter :: &
FILEUNIT = 200_pInt, &
MAXNCHUNKS = 2_pInt
integer(pInt), dimension(1+2*MAXNCHUNKS) :: positions
integer(pInt) :: &
g, & !< grain number
i, & !< integration point number
e, & !< element number
gMax, & !< maximum number of grains
iMax, & !< maximum number of integration points
eMax, & !< maximum number of elements
nMax, & !< maximum number of ip neighbors
myNgrains, & !< number of grains in current IP
section = 0_pInt, &
j, &
p, &
output = 0_pInt, &
mySize
character(len=65536) :: &
tag = '', &
line= ''
write(6,'(/,a)') ' <<<+- crystallite init -+>>>'
write(6,'(a)') ' $Id$'
write(6,'(a15,a)') ' Current time: ',IO_timeStamp()
#include "compilation_info.f90"
gMax = homogenization_maxNgrains
iMax = mesh_maxNips
eMax = mesh_NcpElems
nMax = mesh_maxNipNeighbors
allocate(crystallite_temperature(iMax,eMax), source=temperature)
allocate(crystallite_heat(gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Tstar0_v(6,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partionedTstar0_v(6,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subTstar0_v(6,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Tstar_v(6,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_P(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_F0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partionedF0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partionedF(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subF0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subF(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Fp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partionedFp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subFp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Fp(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_invFp(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Fe(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subFe0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Lp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partionedLp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subLp0(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_Lp(3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_dPdF(3,3,3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_dPdF0(3,3,3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_partioneddPdF0(3,3,3,3,gMax,iMax,eMax),source=0.0_pReal)
allocate(crystallite_fallbackdPdF(3,3,3,3,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_dt(gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subdt(gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subFrac(gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_subStep(gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_orientation(4,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_orientation0(4,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_rotation(4,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_disorientation(4,nMax,gMax,iMax,eMax), source=0.0_pReal)
allocate(crystallite_localPlasticity(gMax,iMax,eMax), source=.true.)
allocate(crystallite_requested(gMax,iMax,eMax), source=.false.)
allocate(crystallite_todo(gMax,iMax,eMax), source=.false.)
allocate(crystallite_converged(gMax,iMax,eMax), source=.true.)
allocate(crystallite_clearToWindForward(iMax,eMax), source=.true.)
allocate(crystallite_syncSubFrac(iMax,eMax), source=.false.)
allocate(crystallite_syncSubFracCompleted(iMax,eMax), source=.false.)
allocate(crystallite_clearToCutback(iMax,eMax), source=.true.)
allocate(crystallite_neighborEnforcedCutback(iMax,eMax), source=.false.)
allocate(crystallite_output(maxval(crystallite_Noutput), &
material_Ncrystallite)) ; crystallite_output = ''
allocate(crystallite_outputID(maxval(crystallite_Noutput), &
material_Ncrystallite), source=undefined_ID)
allocate(crystallite_sizePostResults(material_Ncrystallite),source=0_pInt)
allocate(crystallite_sizePostResult(maxval(crystallite_Noutput), &
material_Ncrystallite), source=0_pInt)
if (.not. IO_open_jobFile_stat(FILEUNIT,material_localFileExt)) & ! no local material configuration present...
call IO_open_file(FILEUNIT,material_configFile) ! ...open material.config file
rewind(FILEUNIT)
do while (trim(line) /= IO_EOF .and. IO_lc(IO_getTag(line,'<','>')) /= material_partCrystallite) ! wind forward to <crystallite>
line = IO_read(FILEUNIT)
enddo
do while (trim(line) /= IO_EOF) ! read through sections of crystallite part
line = IO_read(FILEUNIT)
if (IO_isBlank(line)) cycle ! skip empty lines
if (IO_getTag(line,'<','>') /= '') then ! stop at next part
line = IO_read(FILEUNIT, .true.) ! reset IO_read
exit
endif
if (IO_getTag(line,'[',']') /= '') then ! next section
section = section + 1_pInt
output = 0_pInt ! reset output counter
cycle ! skip to next line
endif
if (section > 0_pInt) then
positions = IO_stringPos(line,maxNchunks)
tag = IO_lc(IO_stringValue(line,positions,1_pInt)) ! extract key
select case(tag)
case ('(output)')
output = output + 1_pInt
crystallite_output(output,section) = IO_lc(IO_stringValue(line,positions,2_pInt))
select case(crystallite_output(output,section))
case ('phase')
crystallite_outputID(output,section) = phase_ID
case ('texture')
crystallite_outputID(output,section) = texture_ID
case ('volume')
crystallite_outputID(output,section) = volume_ID
case ('grainrotationx')
crystallite_outputID(output,section) = grainrotationx_ID
case ('grainrotationy')
crystallite_outputID(output,section) = grainrotationy_ID
case ('grainrotationz')
crystallite_outputID(output,section) = grainrotationx_ID
case ('heat')
crystallite_outputID(output,section) = heat_ID
case ('orientation')
crystallite_outputID(output,section) = orientation_ID
case ('grainrotation')
crystallite_outputID(output,section) = grainrotation_ID
case ('eulerangles')
crystallite_outputID(output,section) = eulerangles_ID
case ('defgrad','f')
crystallite_outputID(output,section) = defgrad_ID
case ('fe')
crystallite_outputID(output,section) = fe_ID
case ('fp')
crystallite_outputID(output,section) = fp_ID
case ('lp')
crystallite_outputID(output,section) = lp_ID
case ('e')
crystallite_outputID(output,section) = e_ID
case ('ee')
crystallite_outputID(output,section) = ee_ID
case ('p','firstpiola','1piola')
crystallite_outputID(output,section) = p_ID
case ('s','tstar','secondpiola','2ndpiola')
crystallite_outputID(output,section) = s_ID
case ('elasmatrix')
crystallite_outputID(output,section) = elasmatrix_ID
case ('neighboringip')
crystallite_outputID(output,section) = neighboringip_ID
case ('neighboringelement')
crystallite_outputID(output,section) = neighboringelement_ID
case default
call IO_error(105_pInt,ext_msg=IO_stringValue(line,positions,2_pInt)//' (Crystallite)')
end select
end select
endif
enddo
close(FILEUNIT)
do i = 1_pInt,material_Ncrystallite
do j = 1_pInt,crystallite_Noutput(i)
select case(crystallite_outputID(j,i))
case(phase_ID,texture_ID,volume_ID,grainrotationx_ID,grainrotationy_ID,grainrotationz_ID,heat_ID)
mySize = 1_pInt
case(orientation_ID,grainrotation_ID) ! orientation as quaternion, or deviation from initial grain orientation in axis-angle form (angle in degrees)
mySize = 4_pInt
case(eulerangles_ID)
mySize = 3_pInt
case(defgrad_ID,fe_ID,fp_ID,lp_ID,e_ID,ee_ID,p_ID,s_ID)
mySize = 9_pInt
case(elasmatrix_ID)
mySize = 36_pInt
case(neighboringip_ID,neighboringelement_ID)
mySize = mesh_maxNipNeighbors
case default
mySize = 0_pInt
end select
outputFound: if (mySize > 0_pInt) then
crystallite_sizePostResult(j,i) = mySize
crystallite_sizePostResults(i) = crystallite_sizePostResults(i) + mySize
endif outputFound
enddo
enddo
crystallite_maxSizePostResults = 0_pInt
do j = 1_pInt,material_Nmicrostructure
if (microstructure_active(j)) &
crystallite_maxSizePostResults = max(crystallite_maxSizePostResults,&
crystallite_sizePostResults(microstructure_crystallite(j)))
enddo
!--------------------------------------------------------------------------------------------------
! write description file for crystallite output
call IO_write_jobFile(FILEUNIT,'outputCrystallite')
do p = 1_pInt,material_Ncrystallite
write(FILEUNIT,'(/,a,/)') '['//trim(crystallite_name(p))//']'
do e = 1_pInt,crystallite_Noutput(p)
write(FILEUNIT,'(a,i4)') trim(crystallite_output(e,p))//char(9),crystallite_sizePostResult(e,p)
enddo
enddo
close(FILEUNIT)
!--------------------------------------------------------------------------------------------------
! initialize
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2) ! iterate over all cp elements
myNgrains = homogenization_Ngrains(mesh_element(3,e)) ! look up homogenization-->grainCount
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1_pInt:myNgrains)
crystallite_Fp0(1:3,1:3,g,i,e) = math_EulerToR(material_EulerAngles(1:3,g,i,e)) ! plastic def gradient reflects init orientation
crystallite_F0(1:3,1:3,g,i,e) = math_I3
crystallite_localPlasticity(g,i,e) = phase_localPlasticity(material_phase(g,i,e))
crystallite_Fe(1:3,1:3,g,i,e) = math_transpose33(crystallite_Fp0(1:3,1:3,g,i,e))
crystallite_Fp(1:3,1:3,g,i,e) = crystallite_Fp0(1:3,1:3,g,i,e)
crystallite_requested(g,i,e) = .true.
endforall
enddo
!$OMP END PARALLEL DO
if(any(.not. crystallite_localPlasticity) .and. .not. usePingPong) call IO_error(601_pInt) ! exit if nonlocal but no ping-pong
crystallite_partionedFp0 = crystallite_Fp0
crystallite_partionedF0 = crystallite_F0
crystallite_partionedF = crystallite_F0
call crystallite_orientations()
crystallite_orientation0 = crystallite_orientation ! store initial orientations for calculation of grain rotations
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
do g = 1_pInt,myNgrains
call constitutive_microstructure(temperature, &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e),g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
enddo
enddo
enddo
!$OMP END PARALLEL DO
call crystallite_stressAndItsTangent(.true.) ! request elastic answers
crystallite_fallbackdPdF = crystallite_dPdF ! use initial elastic stiffness as fallback
!--------------------------------------------------------------------------------------------------
! debug output
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a35,1x,7(i8,1x))') 'crystallite_temperature: ', shape(crystallite_temperature)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_heat: ', shape(crystallite_heat)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Fe: ', shape(crystallite_Fe)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Fp: ', shape(crystallite_Fp)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Lp: ', shape(crystallite_Lp)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_F0: ', shape(crystallite_F0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Fp0: ', shape(crystallite_Fp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Lp0: ', shape(crystallite_Lp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partionedF: ', shape(crystallite_partionedF)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partionedF0: ', shape(crystallite_partionedF0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partionedFp0: ', shape(crystallite_partionedFp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partionedLp0: ', shape(crystallite_partionedLp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subF: ', shape(crystallite_subF)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subF0: ', shape(crystallite_subF0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subFe0: ', shape(crystallite_subFe0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subFp0: ', shape(crystallite_subFp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subLp0: ', shape(crystallite_subLp0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_P: ', shape(crystallite_P)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Tstar_v: ', shape(crystallite_Tstar_v)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_Tstar0_v: ', shape(crystallite_Tstar0_v)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partionedTstar0_v: ', shape(crystallite_partionedTstar0_v)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subTstar0_v: ', shape(crystallite_subTstar0_v)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_dPdF: ', shape(crystallite_dPdF)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_dPdF0: ', shape(crystallite_dPdF0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_partioneddPdF0: ', shape(crystallite_partioneddPdF0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_fallbackdPdF: ', shape(crystallite_fallbackdPdF)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_orientation: ', shape(crystallite_orientation)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_orientation0: ', shape(crystallite_orientation0)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_rotation: ', shape(crystallite_rotation)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_disorientation: ', shape(crystallite_disorientation)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_dt: ', shape(crystallite_dt)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subdt: ', shape(crystallite_subdt)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subFrac: ', shape(crystallite_subFrac)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_subStep: ', shape(crystallite_subStep)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_localPlasticity: ', shape(crystallite_localPlasticity)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_requested: ', shape(crystallite_requested)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_todo: ', shape(crystallite_todo)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_converged: ', shape(crystallite_converged)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_sizePostResults: ', shape(crystallite_sizePostResults)
write(6,'(a35,1x,7(i8,1x))') 'crystallite_sizePostResult: ', shape(crystallite_sizePostResult)
write(6,'(/,a35,1x,i10)') 'Number of nonlocal grains: ',count(.not. crystallite_localPlasticity)
flush(6)
endif
call debug_info
call debug_reset
end subroutine crystallite_init
!--------------------------------------------------------------------------------------------------
!> @brief calculate stress (P) and tangent (dPdF) for crystallites
!--------------------------------------------------------------------------------------------------
subroutine crystallite_stressAndItsTangent(updateJaco)
use numerics, only: &
subStepMinCryst, &
subStepSizeCryst, &
stepIncreaseCryst, &
pert_Fg, &
pert_method, &
nCryst, &
numerics_integrator, &
numerics_integrationMode, &
numerics_timeSyncing, &
relevantStrain, &
analyticJaco
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_CrystalliteLoopDistribution
use IO, only: &
IO_warning, &
IO_error
use math, only: &
math_inv33, &
math_identity2nd, &
math_transpose33, &
math_mul33x33, &
math_mul66x6, &
math_Mandel6to33, &
math_Mandel33to6, &
math_I3, &
math_mul3333xx3333, &
math_mul33xx33, &
math_invert
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips, &
mesh_ipNeighborhood, &
FE_NipNeighbors, &
FE_geomtype, &
FE_cellType
use material, only: &
homogenization_Ngrains, &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_maxNgrains
use constitutive, only: &
constitutive_TandItsTangent, &
constitutive_LpAndItsTangent
implicit none
logical, intent(in) :: &
updateJaco !< whether to update the Jacobian (stiffness) or not
real(pReal) :: &
myPert, & ! perturbation with correct sign
formerSubStep, &
subFracIntermediate
real(pReal), dimension(3,3) :: &
invFp, & ! inverse of the plastic deformation gradient
Fe_guess, & ! guess for elastic deformation gradient
Tstar ! 2nd Piola-Kirchhoff stress tensor
real(pReal), dimension(3,3,3,3,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
dPdF_perturbation1, &
dPdF_perturbation2
real(pReal), dimension(3,3,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
F_backup, &
Fp_backup, &
InvFp_backup, &
Fe_backup, &
Lp_backup, &
P_backup
real(pReal), dimension(6,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
Tstar_v_backup
integer(pInt) :: &
NiterationCrystallite, & ! number of iterations in crystallite loop
e, & ! element index
i, & ! integration point index
g, & ! grain index
k, &
l, &
n, startIP, endIP, &
neighboring_e, &
neighboring_i, &
o, &
p, &
perturbation , & ! loop counter for forward,backward perturbation mode
myNgrains
logical, dimension(homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
convergenceFlag_backup
! local variables used for calculating analytic Jacobian
real(pReal), dimension(3,3):: junk
real(pReal), dimension(3,3,3,3) :: dSdFe, &
dFedF, &
dSdF, &
junk2, &
dLpdS,dFpinvdF,rhs_3333,lhs_3333,temp_3333
real(pReal), dimension(9,9):: temp_99
logical :: error
if (iand(debug_level(debug_crystallite),debug_levelSelective) /= 0_pInt &
.and. FEsolving_execElem(1) <= debug_e &
.and. debug_e <= FEsolving_execElem(2)) then
write(6,'(/,a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> values at el (elFE) ip g ', &
debug_e,'(',mesh_element(1,debug_e), ')',debug_i, debug_g
write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< CRYST >> F0 ', &
math_transpose33(crystallite_partionedF0(1:3,1:3,debug_g,debug_i,debug_e))
write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< CRYST >> Fp0', &
math_transpose33(crystallite_partionedFp0(1:3,1:3,debug_g,debug_i,debug_e))
write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< CRYST >> Lp0', &
math_transpose33(crystallite_partionedLp0(1:3,1:3,debug_g,debug_i,debug_e))
write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< CRYST >> F ', &
math_transpose33(crystallite_partionedF(1:3,1:3,debug_g,debug_i,debug_e))
endif
!--------------------------------------------------------------------------------------------------
! initialize to starting condition
crystallite_subStep = 0.0_pReal
!$OMP PARALLEL DO PRIVATE(myNgrains)
elementLooping1: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), &
g = 1_pInt:myNgrains, crystallite_requested(g,i,e))
plasticState(mappingConstitutive(2,g,i,e))%subState0( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%partionedState0(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%subState0( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%partionedState0(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%subState0( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%partionedState0(:,mappingConstitutive(1,g,i,e))
crystallite_subFp0(1:3,1:3,g,i,e) = crystallite_partionedFp0(1:3,1:3,g,i,e) ! ...plastic def grad
crystallite_subLp0(1:3,1:3,g,i,e) = crystallite_partionedLp0(1:3,1:3,g,i,e) ! ...plastic velocity grad
crystallite_dPdF0(1:3,1:3,1:3,1:3,g,i,e) = crystallite_partioneddPdF0(1:3,1:3,1:3,1:3,g,i,e) ! ...stiffness
crystallite_subF0(1:3,1:3,g,i,e) = crystallite_partionedF0(1:3,1:3,g,i,e) ! ...def grad
crystallite_subTstar0_v(1:6,g,i,e) = crystallite_partionedTstar0_v(1:6,g,i,e) !...2nd PK stress
crystallite_subFe0(1:3,1:3,g,i,e) = math_mul33x33(crystallite_subF0(1:3,1:3,g,i,e), &
math_inv33(crystallite_subFp0(1:3,1:3,g,i,e))) ! only needed later on for stiffness calculation
crystallite_subFrac(g,i,e) = 0.0_pReal
crystallite_subStep(g,i,e) = 1.0_pReal/subStepSizeCryst
crystallite_todo(g,i,e) = .true.
crystallite_converged(g,i,e) = .false. ! pretend failed step of twice the required size
endforall
enddo elementLooping1
!$OMP END PARALLEL DO
singleRun: if (FEsolving_execELem(1) == FEsolving_execElem(2) .and. &
FEsolving_execIP(1,FEsolving_execELem(1))==FEsolving_execIP(2,FEsolving_execELem(1))) then
startIP = FEsolving_execIP(1,FEsolving_execELem(1))
endIP = startIP
else singleRun
startIP = 1_pInt
endIP = mesh_maxNips
endif singleRun
NiterationCrystallite = 0_pInt
numerics_integrationMode = 1_pInt
cutbackLooping: do while (any(crystallite_todo(:,startIP:endIP,FEsolving_execELem(1):FEsolving_execElem(2))))
timeSyncing1: if (any(.not. crystallite_localPlasticity) .and. numerics_timeSyncing) then
! Time synchronization can only be used for nonlocal calculations, and only there it makes sense.
! The idea is that in nonlocal calculations often the vast majority of the ips
! converges in one iteration whereas a small fraction of ips has to do a lot of cutbacks.
! Hence, we try to minimize the computational effort by just doing a lot of cutbacks
! in the vicinity of the "bad" ips and leave the easily converged volume more or less as it is.
! However, some synchronization of the time step has to be done at the border between "bad" ips
! and the ones that immediately converged.
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> crystallite iteration ',NiterationCrystallite
if (any(crystallite_syncSubFrac)) then
! Just did a time synchronization.
! If all synchronizers converged, then do nothing else than winding them forward.
! If any of the synchronizers did not converge, something went completely wrong
! and its not clear how to fix this, so all nonlocals become terminally ill.
if (any(crystallite_syncSubFrac .and. .not. crystallite_converged(1,:,:))) then
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) then
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if (crystallite_syncSubFrac(i,e) .and. .not. crystallite_converged(1,i,e)) &
write(6,'(a,i8,1x,i2)') '<< CRYST >> time synchronization: failed at el,ip ',e,i
enddo
enddo
endif
crystallite_syncSubFrac = .false.
where(.not. crystallite_localPlasticity)
crystallite_substep = 0.0_pReal
crystallite_todo = .false.
endwhere
else
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
crystallite_clearToWindForward(i,e) = crystallite_localPlasticity(1,i,e) .or. crystallite_syncSubFrac(i,e)
crystallite_clearToCutback(i,e) = crystallite_localPlasticity(1,i,e)
enddo
enddo
!$OMP END PARALLEL DO
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> time synchronization: wind forward'
endif
elseif (any(crystallite_syncSubFracCompleted)) then
! Just completed a time synchronization.
! Make sure that the ips that synchronized their time step start non-converged
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if (crystallite_syncSubFracCompleted(i,e)) crystallite_converged(1,i,e) = .false.
crystallite_syncSubFracCompleted(i,e) = .false.
crystallite_clearToWindForward(i,e) = crystallite_localPlasticity(1,i,e)
crystallite_clearToCutback(i,e) = crystallite_localPlasticity(1,i,e) .or. .not. crystallite_converged(1,i,e)
enddo
enddo
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> time synchronization: done, proceed with cutback'
else
! Normal calculation.
! If all converged and are at the end of the time increment, then just do a final wind forward.
! If all converged, but not all reached the end of the time increment, then we only wind
! those forward that are still on their way, all others have to wait.
! If some did not converge and all are still at the start of the time increment,
! then all non-convergers force their converged neighbors to also do a cutback.
! In case that some ips have already wound forward to an intermediate time (subfrac),
! then all those ips that converged in the first iteration, but now have a non-converged neighbor
! have to synchronize their time step to the same intermediate time. If such a synchronization
! takes place, all other ips have to wait and only the synchronizers do a cutback. In the next
! iteration those will do a wind forward while all others still wait.
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
crystallite_clearToWindForward(i,e) = crystallite_localPlasticity(1,i,e)
crystallite_clearToCutback(i,e) = crystallite_localPlasticity(1,i,e)
enddo
enddo
!$OMP END PARALLEL DO
if (all(crystallite_localPlasticity .or. crystallite_converged)) then
if (all(crystallite_localPlasticity .or. crystallite_subStep + crystallite_subFrac >= 1.0_pReal)) then
crystallite_clearToWindForward = .true. ! final wind forward
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> final wind forward'
else
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
crystallite_clearToWindForward(i,e) = crystallite_localPlasticity(1,i,e) .or. crystallite_subStep(1,i,e) < 1.0_pReal
enddo
enddo
!$OMP END PARALLEL DO
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> wind forward'
endif
else
subFracIntermediate = maxval(crystallite_subFrac, mask=.not.crystallite_localPlasticity)
if (subFracIntermediate == 0.0_pReal) then
crystallite_neighborEnforcedCutback = .false. ! look for ips that require a cutback because of a nonconverged neighbor
!$OMP PARALLEL
!$OMP DO PRIVATE(neighboring_e,neighboring_i)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if (.not. crystallite_localPlasticity(1,i,e) .and. crystallite_converged(1,i,e)) then
do n = 1_pInt,FE_NipNeighbors(FE_celltype(FE_geomtype(mesh_element(2,e))))
neighboring_e = mesh_ipNeighborhood(1,n,i,e)
neighboring_i = mesh_ipNeighborhood(2,n,i,e)
if (neighboring_e > 0_pInt .and. neighboring_i > 0_pInt) then
if (.not. crystallite_localPlasticity(1,neighboring_i,neighboring_e) &
.and. .not. crystallite_converged(1,neighboring_i,neighboring_e)) then
crystallite_neighborEnforcedCutback(i,e) = .true.
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a12,i5,1x,i2,a,i5,1x,i2)') '<< CRYST >> ', neighboring_e,neighboring_i, &
' enforced cutback at ',e,i
#endif
exit
endif
endif
enddo
endif
enddo
enddo
!$OMP END DO
!$OMP DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if(crystallite_neighborEnforcedCutback(i,e)) crystallite_converged(1,i,e) = .false.
enddo
enddo
!$OMP END DO
!$OMP END PARALLEL
else
crystallite_syncSubFrac = .false. ! look for ips that have to do a time synchronization because of a nonconverged neighbor
!$OMP PARALLEL
!$OMP DO PRIVATE(neighboring_e,neighboring_i)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if (.not. crystallite_localPlasticity(1,i,e) .and. crystallite_subFrac(1,i,e) == 0.0_pReal) then
do n = 1_pInt,FE_NipNeighbors(FE_celltype(FE_geomtype(mesh_element(2,e))))
neighboring_e = mesh_ipNeighborhood(1,n,i,e)
neighboring_i = mesh_ipNeighborhood(2,n,i,e)
if (neighboring_e > 0_pInt .and. neighboring_i > 0_pInt) then
if (.not. crystallite_localPlasticity(1,neighboring_i,neighboring_e) &
.and. .not. crystallite_converged(1,neighboring_i,neighboring_e)) then
crystallite_syncSubFrac(i,e) = .true.
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a12,i5,1x,i2,a,i5,1x,i2)') '<< CRYST >> ',neighboring_e,neighboring_i, &
' enforced time synchronization at ',e,i
#endif
exit
endif
endif
enddo
endif
enddo
enddo
!$OMP END DO
!$OMP DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if(crystallite_syncSubFrac(i,e)) crystallite_converged(1,i,e) = .false.
enddo
enddo
!$OMP END DO
!$OMP END PARALLEL
endif
where(.not. crystallite_localPlasticity .and. crystallite_subStep < 1.0_pReal) &
crystallite_converged = .false.
if (any(crystallite_syncSubFrac)) then ! have to do syncing now, so all wait except for the synchronizers which do a cutback
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
crystallite_clearToWindForward(i,e) = crystallite_localPlasticity(1,i,e)
crystallite_clearToCutback(i,e) = crystallite_localPlasticity(1,i,e) .or. crystallite_syncSubFrac(i,e)
enddo
enddo
!$OMP END PARALLEL DO
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> time synchronization: cutback'
else
!$OMP PARALLEL DO PRIVATE(myNgrains)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if(.not. crystallite_converged(1,i,e)) crystallite_clearToCutback(i,e) = .true.
enddo
enddo
!$OMP END PARALLEL DO
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i6)') '<< CRYST >> cutback'
endif
endif
endif
! Make sure that all cutbackers start with the same substep
where(.not. crystallite_localPlasticity .and. .not. crystallite_converged) &
crystallite_subStep = minval(crystallite_subStep, mask=.not. crystallite_localPlasticity &
.and. .not. crystallite_converged)
! Those that do neither wind forward nor cutback are not to do
!$OMP PARALLEL DO PRIVATE(myNgrains)
elementLooping2: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
if(.not. crystallite_clearToWindForward(i,e) .and. .not. crystallite_clearToCutback(i,e)) &
crystallite_todo(1,i,e) = .false.
enddo
enddo elementLooping2
!$OMP END PARALLEL DO
endif timeSyncing1
!$OMP PARALLEL DO PRIVATE(myNgrains,formerSubStep)
elementLooping3: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) ! iterate over IPs of this element to be processed
do g = 1,myNgrains
! --- wind forward ---
if (crystallite_converged(g,i,e) .and. crystallite_clearToWindForward(i,e)) then
formerSubStep = crystallite_subStep(g,i,e)
crystallite_subFrac(g,i,e) = crystallite_subFrac(g,i,e) + crystallite_subStep(g,i,e)
!$OMP FLUSH(crystallite_subFrac)
crystallite_subStep(g,i,e) = min(1.0_pReal - crystallite_subFrac(g,i,e), &
stepIncreaseCryst * crystallite_subStep(g,i,e))
!$OMP FLUSH(crystallite_subStep)
if (crystallite_subStep(g,i,e) > 0.0_pReal) then
crystallite_subF0(1:3,1:3,g,i,e) = crystallite_subF(1:3,1:3,g,i,e) ! ...def grad
!$OMP FLUSH(crystallite_subF0)
crystallite_subLp0(1:3,1:3,g,i,e) = crystallite_Lp(1:3,1:3,g,i,e) ! ...plastic velocity gradient
crystallite_subFp0(1:3,1:3,g,i,e) = crystallite_Fp(1:3,1:3,g,i,e) ! ...plastic def grad
crystallite_subFe0(1:3,1:3,g,i,e) = math_mul33x33(crystallite_subF(1:3,1:3,g,i,e), &
crystallite_invFp(1:3,1:3,g,i,e)) ! only needed later on for stiffness calculation
!if abbrevation, make c and p private in omp
plasticState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
crystallite_subTstar0_v(1:6,g,i,e) = crystallite_Tstar_v(1:6,g,i,e) ! ...2nd PK stress
if (crystallite_syncSubFrac(i,e)) then ! if we just did a synchronization of states, then we wind forward without any further time integration
crystallite_syncSubFracCompleted(i,e) = .true.
crystallite_syncSubFrac(i,e) = .false.
crystallite_todo(g,i,e) = .false.
else
crystallite_todo(g,i,e) = .true.
endif
!$OMP FLUSH(crystallite_todo)
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite),debug_levelBasic) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) &
write(6,'(a,f12.8,a,f12.8,a,i8,1x,i2,1x,i3,/)') '<< CRYST >> winding forward from ', &
crystallite_subFrac(g,i,e)-formerSubStep,' to current crystallite_subfrac ', &
crystallite_subFrac(g,i,e),' in crystallite_stressAndItsTangent at el ip g ',e,i,g
#endif
else ! this crystallite just converged for the entire timestep
crystallite_todo(g,i,e) = .false. ! so done here
!$OMP FLUSH(crystallite_todo)
if (iand(debug_level(debug_crystallite),debug_levelBasic) /= 0_pInt &
.and. formerSubStep > 0.0_pReal) then
!$OMP CRITICAL (distributionCrystallite)
debug_CrystalliteLoopDistribution(min(nCryst+1_pInt,NiterationCrystallite)) = &
debug_CrystalliteLoopDistribution(min(nCryst+1_pInt,NiterationCrystallite)) + 1_pInt
!$OMP END CRITICAL (distributionCrystallite)
endif
endif
! --- cutback ---
elseif (.not. crystallite_converged(g,i,e) .and. crystallite_clearToCutback(i,e)) then
if (crystallite_syncSubFrac(i,e)) then ! synchronize time
crystallite_subStep(g,i,e) = subFracIntermediate
else
crystallite_subStep(g,i,e) = subStepSizeCryst * crystallite_subStep(g,i,e) ! cut step in half and restore...
endif
!$OMP FLUSH(crystallite_subStep)
crystallite_Fp(1:3,1:3,g,i,e) = crystallite_subFp0(1:3,1:3,g,i,e) ! ...plastic def grad
!$OMP FLUSH(crystallite_Fp)
crystallite_invFp(1:3,1:3,g,i,e) = math_inv33(crystallite_Fp(1:3,1:3,g,i,e))
!$OMP FLUSH(crystallite_invFp)
crystallite_Lp(1:3,1:3,g,i,e) = crystallite_subLp0(1:3,1:3,g,i,e) ! ...plastic velocity grad
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
crystallite_Tstar_v(1:6,g,i,e) = crystallite_subTstar0_v(1:6,g,i,e) ! ...2nd PK stress
! cant restore dotState here, since not yet calculated in first cutback after initialization
crystallite_todo(g,i,e) = crystallite_subStep(g,i,e) > subStepMinCryst ! still on track or already done (beyond repair)
!$OMP FLUSH(crystallite_todo)
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite),debug_levelBasic) /= 0_pInt) then
if (crystallite_todo(g,i,e)) then
write(6,'(a,f12.8,a,i8,1x,i2,1x,i3,/)') '<< CRYST >> cutback step in crystallite_stressAndItsTangent &
&with new crystallite_subStep: ',&
crystallite_subStep(g,i,e),' at el ip g ',e,i,g
else
write(6,'(a,i8,1x,i2,1x,i3,/)') '<< CRYST >> reached minimum step size &
&in crystallite_stressAndItsTangent at el ip g ',e,i,g
endif
endif
#endif
endif
! --- prepare for integration ---
if (crystallite_todo(g,i,e) .and. (crystallite_clearToWindForward(i,e) .or. crystallite_clearToCutback(i,e))) then
crystallite_subF(1:3,1:3,g,i,e) = crystallite_subF0(1:3,1:3,g,i,e) &
+ crystallite_subStep(g,i,e) &
* (crystallite_partionedF(1:3,1:3,g,i,e) &
- crystallite_partionedF0(1:3,1:3,g,i,e))
!$OMP FLUSH(crystallite_subF)
crystallite_Fe(1:3,1:3,g,i,e) = math_mul33x33(crystallite_subF(1:3,1:3,g,i,e), crystallite_invFp(1:3,1:3,g,i,e))
crystallite_subdt(g,i,e) = crystallite_subStep(g,i,e) * crystallite_dt(g,i,e)
crystallite_converged(g,i,e) = .false. ! start out non-converged
endif
enddo ! grains
enddo ! IPs
enddo elementLooping3
!$OMP END PARALLEL DO
timeSyncing2: if(numerics_timeSyncing) then
if (any(.not. crystallite_localPlasticity .and. .not. crystallite_todo .and. .not. crystallite_converged &
.and. crystallite_subStep <= subStepMinCryst)) then ! no way of rescuing a nonlocal ip that violated the lower time step limit, ...
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) then
elementLooping4: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
do g = 1,myNgrains
if (.not. crystallite_localPlasticity(g,i,e) .and. .not. crystallite_todo(g,i,e) &
.and. .not. crystallite_converged(g,i,e) .and. crystallite_subStep(g,i,e) <= subStepMinCryst) &
write(6,'(a,i8,1x,i2,1x,i3)') '<< CRYST >> nonlocal violated minimum subStep at el,ip,g ',e,i,g
enddo
enddo
enddo elementLooping4
endif
where(.not. crystallite_localPlasticity)
crystallite_todo = .false. ! ... so let all nonlocal ips die peacefully
crystallite_subStep = 0.0_pReal
endwhere
endif
endif timeSyncing2
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) then
write(6,'(/,a,e12.5)') '<< CRYST >> min(subStep) ',minval(crystallite_subStep)
write(6,'(a,e12.5)') '<< CRYST >> max(subStep) ',maxval(crystallite_subStep)
write(6,'(a,e12.5)') '<< CRYST >> min(subFrac) ',minval(crystallite_subFrac)
write(6,'(a,e12.5,/)') '<< CRYST >> max(subFrac) ',maxval(crystallite_subFrac)
flush(6)
endif
! --- integrate --- requires fully defined state array (basic + dependent state)
if (any(crystallite_todo)) then
select case(numerics_integrator(numerics_integrationMode))
case(1_pInt)
call crystallite_integrateStateFPI()
case(2_pInt)
call crystallite_integrateStateEuler()
case(3_pInt)
call crystallite_integrateStateAdaptiveEuler()
case(4_pInt)
call crystallite_integrateStateRK4()
case(5_pInt)
call crystallite_integrateStateRKCK45()
end select
endif
where(.not. crystallite_converged .and. crystallite_subStep > subStepMinCryst) & ! do not try non-converged & fully cutbacked any further
crystallite_todo = .true.
NiterationCrystallite = NiterationCrystallite + 1_pInt
enddo cutbackLooping
! --+>> CHECK FOR NON-CONVERGED CRYSTALLITES <<+--
elementLooping5: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) ! iterate over IPs of this element to be processed
do g = 1,myNgrains
if (.not. crystallite_converged(g,i,e)) then ! respond fully elastically (might be not required due to becoming terminally ill anyway)
if(iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,/)') '<< CRYST >> no convergence: respond fully elastic at el (elFE) ip g ', &
e,'(',mesh_element(1,e),')',i,g
invFp = math_inv33(crystallite_partionedFp0(1:3,1:3,g,i,e))
Fe_guess = math_mul33x33(crystallite_partionedF(1:3,1:3,g,i,e), invFp)
call constitutive_TandItsTangent(Tstar, junk2, Fe_guess,g,i,e)
crystallite_P(1:3,1:3,g,i,e) = math_mul33x33(Fe_guess,math_mul33x33(Tstar,transpose(invFp)))
endif
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite),debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i2,1x,i3)') '<< CRYST >> central solution of cryst_StressAndTangent at el ip g ',e,i,g
write(6,'(/,a,/,3(12x,3(f12.4,1x)/))') '<< CRYST >> P / MPa', &
math_transpose33(crystallite_P(1:3,1:3,g,i,e))*1.0e-6_pReal
write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< CRYST >> Fp', &
math_transpose33(crystallite_Fp(1:3,1:3,g,i,e))
write(6,'(a,/,3(12x,3(f14.9,1x)/),/)') '<< CRYST >> Lp', &
math_transpose33(crystallite_Lp(1:3,1:3,g,i,e))
flush(6)
endif
enddo
enddo
enddo elementLooping5
! --+>> STIFFNESS CALCULATION <<+--
computeJacobian: if(updateJaco) then
jacobianMethod: if (analyticJaco) then
! --- ANALYTIC JACOBIAN ---
!$OMP PARALLEL DO PRIVATE(dFedF,dSdF,dSdFe,dLpdS,dFpinvdF,rhs_3333,lhs_3333,temp_3333,temp_99,junk,myNgrains)
elementLooping6: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) ! iterate over IPs of this element to be processed
do g = 1_pInt,myNgrains
call constitutive_TandItsTangent(junk,dSdFe,crystallite_Fe(1:3,1:3,g,i,e),g,i,e) ! call constitutive law to calculate 2nd Piola-Kirchhoff stress and its derivative
call constitutive_LpAndItsTangent(junk,temp_99,crystallite_Tstar_v(1:6,g,i,e), &
crystallite_temperature(i,e),g,i,e)
dLpdS = reshape(temp_99,shape=[3,3,3,3])
rhs_3333 = 0.0_pReal
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
rhs_3333(p,o,1:3,1:3) = math_mul33x33(dSdFe(p,o,1:3,1:3), &
math_transpose33(crystallite_invFp(1:3,1:3,g,i,e)))
junk = math_mul33x33(math_mul33x33(crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e)), &
math_inv33(crystallite_Fp0(1:3,1:3,g,i,e)))
temp_3333 = 0.0_pReal
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
temp_3333(1:3,1:3,p,o) = math_mul33x33(junk,dLpdS(1:3,1:3,p,o))
lhs_3333 = crystallite_dt(g,i,e)*math_mul3333xx3333(dSdFe,temp_3333)
call math_invert(9_pInt,math_identity2nd(9_pInt)+reshape(lhs_3333,shape=[9,9]),temp_99,error)
if (error) call IO_error(error_ID=400_pInt,ext_msg='analytic tangent inversion')
dSdF = math_mul3333xx3333(reshape(temp_99,shape=[3,3,3,3]),rhs_3333)
temp_3333 = math_mul3333xx3333(dLpdS,dSdF)
dFpinvdF = 0.0_pReal
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
dFpinvdF(1:3,1:3,p,o) = -crystallite_dt(g,i,e)* &
math_mul33x33(math_inv33(crystallite_Fp0(1:3,1:3,g,i,e)), &
temp_3333(1:3,1:3,p,o))
temp_3333 = 0.0_pReal
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
temp_3333(o,p,o,1:3) = crystallite_invFp(1:3,p,g,i,e) ! dFe^T_ij/dF_kl = delta_jk * (Fp current^-1)_li
dFedF = 0.0_pReal
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
dFedF(1:3,1:3,p,o) = temp_3333(1:3,1:3,p,o) + &
math_mul33x33(crystallite_subF(1:3,1:3,g,i,e), &
dFpinvdF(1:3,1:3,p,o))
forall(p=1_pInt:3_pInt, o=1_pInt:3_pInt) &
crystallite_dPdF(1:3,1:3,o,p,g,i,e) = &
math_mul33x33(math_mul33x33(dFedF(1:3,1:3,o,p),&
math_Mandel6to33(crystallite_Tstar_v(1:6,g,i,e))), &
math_transpose33(crystallite_invFp(1:3,1:3,g,i,e))) + & ! dP/dF = dFe/dF * S * Fp^-T...
math_mul33x33(crystallite_Fe(1:3,1:3,g,i,e), &
math_mul33x33(dSdF(1:3,1:3,o,p), &
math_transpose33(crystallite_invFp(1:3,1:3,g,i,e)))) + & ! + Fe * dS/dF * Fp^-T
math_mul33x33(crystallite_Fe(1:3,1:3,g,i,e), &
math_mul33x33(math_Mandel6to33(crystallite_Tstar_v(1:6,g,i,e)), &
math_transpose33(dFpinvdF(1:3,1:3,p,o)))) ! + Fe * S * dFp^-T/dF
enddo; enddo
enddo elementLooping6
!$OMP END PARALLEL DO
else jacobianMethod
! --- STANDARD (PERTURBATION METHOD) FOR JACOBIAN ---
numerics_integrationMode = 2_pInt
! --- BACKUP ---
!$OMP PARALLEL DO PRIVATE(myNgrains)
elementLooping7: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains)
plasticState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e))
plasticState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e))
F_backup(1:3,1:3,g,i,e) = crystallite_subF(1:3,1:3,g,i,e) ! ... and kinematics
Fp_backup(1:3,1:3,g,i,e) = crystallite_Fp(1:3,1:3,g,i,e)
InvFp_backup(1:3,1:3,g,i,e) = crystallite_invFp(1:3,1:3,g,i,e)
Fe_backup(1:3,1:3,g,i,e) = crystallite_Fe(1:3,1:3,g,i,e)
Lp_backup(1:3,1:3,g,i,e) = crystallite_Lp(1:3,1:3,g,i,e)
Tstar_v_backup(1:6,g,i,e) = crystallite_Tstar_v(1:6,g,i,e)
P_backup(1:3,1:3,g,i,e) = crystallite_P(1:3,1:3,g,i,e)
convergenceFlag_backup(g,i,e) = crystallite_converged(g,i,e)
endforall
enddo elementLooping7
!$END PARALLEL DO
! --- CALCULATE STATE AND STRESS FOR PERTURBATION ---
dPdF_perturbation1 = crystallite_dPdF0 ! initialize stiffness with known good values from last increment
dPdF_perturbation2 = crystallite_dPdF0 ! initialize stiffness with known good values from last increment
pertubationLoop: do perturbation = 1,2 ! forward and backward perturbation
if (iand(pert_method,perturbation) > 0_pInt) then ! mask for desired direction
myPert = -pert_Fg * (-1.0_pReal)**perturbation ! set perturbation step
do k = 1,3; do l = 1,3 ! ...alter individual components
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite),debug_levelSelective) /= 0_pInt)) &
write(6,'(a,2(1x,i1),1x,a,/)') '<< CRYST >> [[[[[[ Stiffness perturbation',k,l,']]]]]]'
! --- INITIALIZE UNPERTURBED STATE ---
select case(numerics_integrator(numerics_integrationMode))
case(1_pInt)
!why not OMP? ! Fix-point method: restore to last converged state at end of subinc, since this is probably closest to perturbed state
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains)
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
plasticState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
crystallite_Fp(1:3,1:3,g,i,e) = Fp_backup(1:3,1:3,g,i,e)
crystallite_invFp(1:3,1:3,g,i,e) = InvFp_backup(1:3,1:3,g,i,e)
crystallite_Fe(1:3,1:3,g,i,e) = Fe_backup(1:3,1:3,g,i,e)
crystallite_Lp(1:3,1:3,g,i,e) = Lp_backup(1:3,1:3,g,i,e)
crystallite_Tstar_v(1:6,g,i,e) = Tstar_v_backup(1:6,g,i,e)
endforall
enddo
case(2_pInt,3_pInt) ! explicit Euler methods: nothing to restore (except for F), since we are only doing a stress integration step
case(4_pInt,5_pInt)
!why not OMP? ! explicit Runge-Kutta methods: restore to start of subinc, since we are doing a full integration of state and stress
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains)
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%subState0(:,mappingConstitutive(1,g,i,e))
plasticState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
crystallite_Fp(1:3,1:3,g,i,e) = crystallite_subFp0(1:3,1:3,g,i,e)
crystallite_Fe(1:3,1:3,g,i,e) = crystallite_subFe0(1:3,1:3,g,i,e)
crystallite_Lp(1:3,1:3,g,i,e) = crystallite_subLp0(1:3,1:3,g,i,e)
crystallite_Tstar_v(1:6,g,i,e) = crystallite_subTstar0_v(1:6,g,i,e)
endforall
enddo
end select
! --- PERTURB EITHER FORWARD OR BACKWARD ---
!why not OMP?
do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
do g = 1,myNgrains
crystallite_subF(1:3,1:3,g,i,e) = F_backup(1:3,1:3,g,i,e)
crystallite_subF(k,l,g,i,e) = crystallite_subF(k,l,g,i,e) + myPert
crystallite_todo(g,i,e) = crystallite_requested(g,i,e) &
.and. convergenceFlag_backup(g,i,e)
if (crystallite_todo(g,i,e)) crystallite_converged(g,i,e) = .false. ! start out non-converged
enddo; enddo; enddo
select case(numerics_integrator(numerics_integrationMode))
case(1_pInt)
call crystallite_integrateStateFPI()
case(2_pInt)
call crystallite_integrateStateEuler()
case(3_pInt)
call crystallite_integrateStateAdaptiveEuler()
case(4_pInt)
call crystallite_integrateStateRK4()
case(5_pInt)
call crystallite_integrateStateRKCK45()
end select
!why not OMP?
elementLooping8: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
select case(perturbation)
case(1_pInt)
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. crystallite_converged(g,i,e)) & ! converged state warrants stiffness update
dPdF_perturbation1(1:3,1:3,k,l,g,i,e) = &
(crystallite_P(1:3,1:3,g,i,e) - P_backup(1:3,1:3,g,i,e)) / myPert ! tangent dP_ij/dFg_kl
case(2_pInt)
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. crystallite_converged(g,i,e)) & ! converged state warrants stiffness update
dPdF_perturbation2(1:3,1:3,k,l,g,i,e) = &
(crystallite_P(1:3,1:3,g,i,e) - P_backup(1:3,1:3,g,i,e)) / myPert ! tangent dP_ij/dFg_kl
end select
enddo elementLooping8
enddo; enddo ! k,l component perturbation loop
endif
enddo pertubationLoop
! --- STIFFNESS ACCORDING TO PERTURBATION METHOD AND CONVERGENCE ---
elementLooping9: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
select case(pert_method)
case(1_pInt)
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. convergenceFlag_backup(g,i,e)) & ! perturbation mode 1: central solution converged
crystallite_dPdF(1:3,1:3,1:3,1:3,g,i,e) = dPdF_perturbation1(1:3,1:3,1:3,1:3,g,i,e)
case(2_pInt)
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. convergenceFlag_backup(g,i,e)) & ! perturbation mode 2: central solution converged
crystallite_dPdF(1:3,1:3,1:3,1:3,g,i,e) = dPdF_perturbation2(1:3,1:3,1:3,1:3,g,i,e)
case(3_pInt)
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. convergenceFlag_backup(g,i,e)) & ! perturbation mode 3: central solution converged
crystallite_dPdF(1:3,1:3,1:3,1:3,g,i,e) = 0.5_pReal* ( dPdF_perturbation1(1:3,1:3,1:3,1:3,g,i,e) &
+ dPdF_perturbation2(1:3,1:3,1:3,1:3,g,i,e))
end select
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains, &
crystallite_requested(g,i,e) .and. .not. convergenceFlag_backup(g,i,e)) & ! for any pertubation mode: if central solution did not converge...
crystallite_dPdF(1:3,1:3,1:3,1:3,g,i,e) = crystallite_fallbackdPdF(1:3,1:3,1:3,1:3,g,i,e) ! ...use (elastic) fallback
enddo elementLooping9
! --- RESTORE ---
!why not OMP?
elementLooping10: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
forall (i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), g = 1:myNgrains)
plasticState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%state( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%state_backup(:,mappingConstitutive(1,g,i,e))
plasticState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
plasticState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
damageState( mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
damageState( mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
thermalState(mappingConstitutive(2,g,i,e))%dotState( :,mappingConstitutive(1,g,i,e)) = &
thermalState(mappingConstitutive(2,g,i,e))%dotState_backup(:,mappingConstitutive(1,g,i,e))
crystallite_subF(1:3,1:3,g,i,e) = F_backup(1:3,1:3,g,i,e)
crystallite_Fp(1:3,1:3,g,i,e) = Fp_backup(1:3,1:3,g,i,e)
crystallite_invFp(1:3,1:3,g,i,e) = InvFp_backup(1:3,1:3,g,i,e)
crystallite_Fe(1:3,1:3,g,i,e) = Fe_backup(1:3,1:3,g,i,e)
crystallite_Lp(1:3,1:3,g,i,e) = Lp_backup(1:3,1:3,g,i,e)
crystallite_Tstar_v(1:6,g,i,e) = Tstar_v_backup(1:6,g,i,e)
crystallite_P(1:3,1:3,g,i,e) = P_backup(1:3,1:3,g,i,e)
crystallite_converged(g,i,e) = convergenceFlag_backup(g,i,e)
endforall
enddo elementLooping10
endif jacobianMethod
endif computeJacobian
!why not OMP?
elementLooping12: do e = FEsolving_execElem(1),FEsolving_execElem(2)
myNgrains = homogenization_Ngrains(mesh_element(3,e))
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) ! iterate over IPs of this element to be processed
do g = 1,myNgrains
crystallite_heat(g,i,e) = 0.98_pReal* &
abs(math_mul33xx33(math_Mandel6to33(crystallite_Tstar_v(1:6,g,i,e)), &
crystallite_Lp(1:3,1:3,g,i,e)))
! constitutive_localDamage(g,i,e) = &
! 1.0_pReal* &
! sum(math_Mandel6to33(crystallite_Tstar_v(1:6,g,i,e)/constitutive_gradientDamage(g,i,e))* &
! (math_mul33x33(math_transpose33(crystallite_Fe(1:3,1:3,g,i,e)), &
! crystallite_Fe(1:3,1:3,g,i,e))-math_I3))/4.0_pReal + &
! 0.0_pReal* &
! sum(abs(math_mul33x33(math_transpose33(crystallite_Fp(1:3,1:3,g,i,e)), &
! crystallite_Fp(1:3,1:3,g,i,e))-math_I3)/2.0_pReal)
enddo
enddo
enddo elementLooping12
end subroutine crystallite_stressAndItsTangent
!--------------------------------------------------------------------------------------------------
!> @brief integrate stress, state with 4th order explicit Runge Kutta method
!--------------------------------------------------------------------------------------------------
subroutine crystallite_integrateStateRK4()
use numerics, only: &
numerics_integrationMode
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_StateLoopDistribution
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips
use material, only: &
homogenization_Ngrains, &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_maxNgrains
use constitutive, only: &
constitutive_collectDotState, &
constitutive_microstructure
use constitutive_damage, only: &
constitutive_damage_collectDotState, &
constitutive_damage_microstructure
use constitutive_thermal, only: &
constitutive_thermal_collectDotState, &
constitutive_thermal_microstructure
implicit none
real(pReal), dimension(4), parameter :: &
TIMESTEPFRACTION = [0.5_pReal, 0.5_pReal, 1.0_pReal, 1.0_pReal] ! factor giving the fraction of the original timestep used for Runge Kutta Integration
real(pReal), dimension(4), parameter :: &
WEIGHT = [1.0_pReal, 2.0_pReal, 2.0_pReal, 1.0_pReal/6.0_pReal] ! weight of slope used for Runge Kutta integration (final weight divided by 6)
integer(pInt) :: e, & ! element index in element loop
i, & ! integration point index in ip loop
g, & ! grain index in grain loop
p, & ! phase loop
c, &
n, &
mySizePlasticDotState, &
mySizeDamageDotState, &
mySizeThermalDotState
integer(pInt), dimension(2) :: eIter ! bounds for element iteration
integer(pInt), dimension(2,mesh_NcpElems) :: iIter, & ! bounds for ip iteration
gIter ! bounds for grain iteration
logical :: singleRun ! flag indicating computation for single (g,i,e) triple
eIter = FEsolving_execElem(1:2)
do e = eIter(1),eIter(2)
iIter(1:2,e) = FEsolving_execIP(1:2,e)
gIter(1:2,e) = [ 1_pInt,homogenization_Ngrains(mesh_element(3,e))]
enddo
singleRun = (eIter(1) == eIter(2) .and. iIter(1,eIter(1)) == iIter(2,eIter(2)))
!--------------------------------------------------------------------------------------------------
! initialize dotState
if (.not. singleRun) then
forall(p = 1_pInt:size(plasticState)) plasticState(p)%RK4dotState = 0.0_pReal
forall(p = 1_pInt:size(damageState)) damageState(p)%RK4dotState = 0.0_pReal
forall(p = 1_pInt:size(thermalState)) thermalState(p)%RK4dotState = 0.0_pReal
else
e = eIter(1)
i = iIter(1,e)
do g = iIter(1,e), iIter(2,e)
plasticState(mappingConstitutive(2,g,i,e))%RK4dotState(:,mappingConstitutive(1,g,i,e)) = 0.0_pReal
damageState( mappingConstitutive(2,g,i,e))%RK4dotState(:,mappingConstitutive(1,g,i,e)) = 0.0_pReal
thermalState(mappingConstitutive(2,g,i,e))%RK4dotState(:,mappingConstitutive(1,g,i,e)) = 0.0_pReal
enddo
endif
!--------------------------------------------------------------------------------------------------
! first Runge-Kutta step
!$OMP PARALLEL
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
c = mappingConstitutive(1,g,i,e)
p = mappingConstitutive(2,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or.&
any(damageState(p)%dotState(:,c) /= damageState(p)%dotState(:,c)) .or.&
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
!--------------------------------------------------------------------------------------------------
! --- SECOND TO FOURTH RUNGE KUTTA STEP PLUS FINAL INTEGRATION ---
do n = 1_pInt,4_pInt
! --- state update ---
!$OMP PARALLEL
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
plasticState(p)%RK4dotState(:,c) = plasticState(p)%RK4dotState(:,c) &
+ weight(n)*plasticState(p)%dotState(:,c)
damageState(p)%RK4dotState(:,c) = damageState(p)%RK4dotState(:,c) &
+ weight(n)*damageState(p)%dotState(:,c)
thermalState(p)%RK4dotState(:,c) = thermalState(p)%RK4dotState(:,c) &
+ weight(n)*thermalState(p)%dotState(:,c)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState(p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
plasticState(p)%state(1:mySizePlasticDotState,c) = plasticState(p)%subState0(1:mySizePlasticDotState,c) &
+ plasticState(p)%dotState (1:mySizePlasticDotState,c) &
* crystallite_subdt(g,i,e) * timeStepFraction(n)
damageState( p)%state(1:mySizeDamageDotState,c) = damageState(p)%subState0(1:mySizeDamageDotState,c) &
+ damageState(p)%dotState (1:mySizeDamageDotState,c) &
* crystallite_subdt(g,i,e) * timeStepFraction(n)
thermalState(p)%state(1:mySizeThermalDotState,c) = thermalState(p)%subState0(1:mySizeThermalDotState,c) &
+ thermalState(p)%dotState (1:mySizeThermalDotState,c) &
* crystallite_subdt(g,i,e) * timeStepFraction(n)
#ifndef _OPENMP
if (n == 4 &
.and. iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then ! final integration step
write(6,'(a,i8,1x,i2,1x,i3,/)') '<< CRYST >> updateState at el ip g ',e,i,g
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> dotState', plasticState(p)%dotState(1:mySizePlasticDotState,c)
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state', plasticState(p)%state(1:mySizePlasticDotState,c)
endif
#endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- state jump ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- update dependent states ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_microstructure(crystallite_temperature(i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- stress integration ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e,timeStepFraction(n)) ! fraction of original times step
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- dot state and RK dot state---
first3steps: if (n < 4) then
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
timeStepFraction(n)*crystallite_subdt(g,i,e), & ! fraction of original timestep
crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or.&
any(damageState(p)%dotState(:,c) /= damageState(p)%dotState(:,c)) .or.&
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
endif first3steps
!$OMP END PARALLEL
enddo
! --- SET CONVERGENCE FLAG ---
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
crystallite_converged(g,i,e) = .true. ! if still "to do" then converged per definitionem
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(4,numerics_integrationMode) = &
debug_StateLoopDistribution(4,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
enddo; enddo; enddo
! --- CHECK NONLOCAL CONVERGENCE ---
if (.not. singleRun) then ! if not requesting Integration of just a single IP
if (any(.not. crystallite_converged .and. .not. crystallite_localPlasticity)) then ! any non-local not yet converged (or broken)...
crystallite_converged = crystallite_converged .and. crystallite_localPlasticity ! ...restart all non-local as not converged
endif
endif
end subroutine crystallite_integrateStateRK4
!--------------------------------------------------------------------------------------------------
!> @brief integrate stress, state with 5th order Runge-Kutta Cash-Karp method with
!> adaptive step size (use 5th order solution to advance = "local extrapolation")
!--------------------------------------------------------------------------------------------------
subroutine crystallite_integrateStateRKCK45()
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_StateLoopDistribution
use numerics, only: &
rTol_crystalliteState, &
numerics_integrationMode
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips
use material, only: &
homogenization_Ngrains, &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_maxNgrains
use constitutive, only: &
constitutive_collectDotState, &
constitutive_maxSizeDotState, &
constitutive_microstructure
use constitutive_damage, only: &
constitutive_damage_collectDotState, &
constitutive_damage_microstructure, &
constitutive_damage_maxSizeDotState
use constitutive_thermal, only: &
constitutive_thermal_collectDotState, &
constitutive_thermal_microstructure, &
constitutive_thermal_maxSizeDotState
implicit none
real(pReal), dimension(5,5), parameter :: &
A = reshape([&
.2_pReal, .075_pReal, .3_pReal, -11.0_pReal/54.0_pReal, 1631.0_pReal/55296.0_pReal, &
.0_pReal, .225_pReal, -.9_pReal, 2.5_pReal, 175.0_pReal/512.0_pReal, &
.0_pReal, .0_pReal, 1.2_pReal, -70.0_pReal/27.0_pReal, 575.0_pReal/13824.0_pReal, &
.0_pReal, .0_pReal, .0_pReal, 35.0_pReal/27.0_pReal, 44275.0_pReal/110592.0_pReal, &
.0_pReal, .0_pReal, .0_pReal, .0_pReal, 253.0_pReal/4096.0_pReal], &
[5,5], order=[2,1]) !< coefficients in Butcher tableau (used for preliminary integration in stages 2 to 6)
real(pReal), dimension(6), parameter :: &
B = &
[37.0_pReal/378.0_pReal, .0_pReal, 250.0_pReal/621.0_pReal, &
125.0_pReal/594.0_pReal, .0_pReal, 512.0_pReal/1771.0_pReal], & !< coefficients in Butcher tableau (used for final integration and error estimate)
DB = B - &
[2825.0_pReal/27648.0_pReal, .0_pReal, 18575.0_pReal/48384.0_pReal,&
13525.0_pReal/55296.0_pReal, 277.0_pReal/14336.0_pReal, 0.25_pReal] !< coefficients in Butcher tableau (used for final integration and error estimate)
real(pReal), dimension(5), parameter :: &
C = [0.2_pReal, 0.3_pReal, 0.6_pReal, 1.0_pReal, 0.875_pReal] !< coefficients in Butcher tableau (fractions of original time step in stages 2 to 6)
integer(pInt) :: &
e, & ! element index in element loop
i, & ! integration point index in ip loop
g, & ! grain index in grain loop
stage, & ! stage index in integration stage loop
s, & ! state index
n, &
p, &
cc, &
mySizePlasticDotState, & ! size of dot States
mySizeDamageDotState, &
mySizeThermalDotState
integer(pInt), dimension(2) :: &
eIter ! bounds for element iteration
integer(pInt), dimension(2,mesh_NcpElems) :: &
iIter, & ! bounds for ip iteration
gIter ! bounds for grain iteration
real(pReal), dimension(constitutive_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
stateResiduum, & ! residuum from evolution in microstructure
relStateResiduum ! relative residuum from evolution in microstructure
real(pReal), dimension(constitutive_damage_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
damageStateResiduum, & ! residuum from evolution in microstructure
relDamageStateResiduum ! relative residuum from evolution in microstructure
real(pReal), dimension(constitutive_thermal_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
thermalStateResiduum, & ! residuum from evolution in microstructure
relThermalStateResiduum ! relative residuum from evolution in microstructure
logical :: &
singleRun ! flag indicating computation for single (g,i,e) triple
eIter = FEsolving_execElem(1:2)
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,1x,i1)') '<< CRYST >> Runge--Kutta step',1
! --- LOOP ITERATOR FOR ELEMENT, GRAIN, IP ---
do e = eIter(1),eIter(2)
iIter(1:2,e) = FEsolving_execIP(1:2,e)
gIter(1:2,e) = [ 1_pInt,homogenization_Ngrains(mesh_element(3,e))]
enddo
singleRun = (eIter(1) == eIter(2) .and. iIter(1,eIter(1)) == iIter(2,eIter(2)))
! --- FIRST RUNGE KUTTA STEP ---
!$OMP PARALLEL
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
cc = mappingConstitutive(1,g,i,e)
p = mappingConstitutive(2,g,i,e)
if ( any(plasticState(p)%dotState(:,cc) /= plasticState(p)%dotState(:,cc)) .or.&
any(damageState(p)%dotState(:,cc) /= damageState(p)%dotState(:,cc)) .or.&
any(thermalState(p)%dotState(:,cc) /= thermalState(p)%dotState(:,cc))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
! --- SECOND TO SIXTH RUNGE KUTTA STEP ---
do stage = 1_pInt,5_pInt
! --- state update ---
!$OMP PARALLEL
!$OMP DO PRIVATE(p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
plasticState(p)%RKCK45dotState(stage,:,cc) = plasticState(p)%dotState(:,cc) ! store Runge-Kutta dotState
damageState(p)%RKCK45dotState(stage,:,cc) = damageState(p)%dotState(:,cc) ! store Runge-Kutta dotState
thermalState(p)%RKCK45dotState(stage,:,cc) = thermalState(p)%dotState(:,cc) ! store Runge-Kutta dotState
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,cc,n)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
plasticState(p)%dotState(:,cc) = A(1,stage) * plasticState(p)%RKCK45dotState(1,:,cc)
damageState( p)%dotState(:,cc) = A(1,stage) * damageState( p)%RKCK45dotState(1,:,cc)
thermalState(p)%dotState(:,cc) = A(1,stage) * thermalState(p)%RKCK45dotState(1,:,cc)
do n = 2_pInt, stage
plasticState(p)%dotState(:,cc) = &
plasticState(p)%dotState(:,cc) + A(n,stage) * plasticState(p)%RKCK45dotState(n,:,cc)
damageState( p)%dotState(:,cc) = &
damageState( p)%dotState(:,cc) + A(n,stage) * damageState( p)%RKCK45dotState(n,:,cc)
thermalState(p)%dotState(:,cc) = &
thermalState(p)%dotState(:,cc) + A(n,stage) * thermalState(p)%RKCK45dotState(n,:,cc)
enddo
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
plasticState(p)%state(1:mySizePlasticDotState,cc) = plasticState(p)%subState0(1:mySizePlasticDotState,cc) &
+ plasticState(p)%dotState (1:mySizePlasticDotState,cc) &
* crystallite_subdt(g,i,e)
damageState(p)%state(1:mySizeDamageDotState,cc) = damageState(p)%subState0( 1:mySizeDamageDotState,cc) &
+ damageState(p)%dotState ( 1:mySizeDamageDotState,cc) &
* crystallite_subdt(g,i,e)
thermalState(p)%state(1:mySizeThermalDotState,cc) = thermalState(p)%subState0(1:mySizeThermalDotState,cc) &
+ thermalState(p)%dotState (1:mySizeThermalDotState,cc) &
* crystallite_subdt(g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- state jump ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- update dependent states ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_microstructure(crystallite_temperature(i,e), crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- stress integration ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e,C(stage)) ! fraction of original time step
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- dot state and RK dot state---
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,1x,i1)') '<< CRYST >> Runge--Kutta step',stage+1_pInt
#endif
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
C(stage)*crystallite_subdt(g,i,e), & ! fraction of original timestep
crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,cc) /= plasticState(p)%dotState(:,cc)) .or.&
any(damageState(p)%dotState(:,cc) /= damageState(p)%dotState(:,cc)) .or.&
any(thermalState(p)%dotState(:,cc) /= thermalState(p)%dotState(:,cc))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
enddo
!--------------------------------------------------------------------------------------------------
! --- STATE UPDATE WITH ERROR ESTIMATE FOR STATE ---
relStateResiduum = 0.0_pReal
relDamageStateResiduum = 0.0_pReal
relThermalStateResiduum = 0.0_pReal
!$OMP PARALLEL
!$OMP DO PRIVATE(p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
plasticState(p)%RKCK45dotState(6,:,cc) = plasticState(p)%dotState(:,cc) ! store Runge-Kutta dotState
damageState( p)%RKCK45dotState(6,:,cc) = damageState( p)%dotState(:,cc) ! store Runge-Kutta dotState
thermalState(p)%RKCK45dotState(6,:,cc) = thermalState(p)%dotState(:,cc) ! store Runge-Kutta dotState
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
! --- absolute residuum in state ---
! NEED TO DO THE ADDITION IN THIS LENGTHY WAY BECAUSE OF PARALLELIZATION
! CAN'T USE A REDUCTION CLAUSE ON A POINTER OR USER DEFINED TYPE
stateResiduum(1:mySizePlasticDotState,g,i,e) = &
( DB(1) * plasticState(p)%RKCK45dotState(1,1:mySizePlasticDotState,cc) &
+ DB(2) * plasticState(p)%RKCK45dotState(2,1:mySizePlasticDotState,cc) &
+ DB(3) * plasticState(p)%RKCK45dotState(3,1:mySizePlasticDotState,cc) &
+ DB(4) * plasticState(p)%RKCK45dotState(4,1:mySizePlasticDotState,cc) &
+ DB(5) * plasticState(p)%RKCK45dotState(5,1:mySizePlasticDotState,cc) &
+ DB(6) * plasticState(p)%RKCK45dotState(6,1:mySizePlasticDotState,cc) &
) * crystallite_subdt(g,i,e)
damageStateResiduum(1:mySizeDamageDotState,g,i,e) = &
( DB(1) * damageState(p)%RKCK45dotState(1,1:mySizeDamageDotState,cc) &
+ DB(2) * damageState(p)%RKCK45dotState(2,1:mySizeDamageDotState,cc) &
+ DB(3) * damageState(p)%RKCK45dotState(3,1:mySizeDamageDotState,cc) &
+ DB(4) * damageState(p)%RKCK45dotState(4,1:mySizeDamageDotState,cc) &
+ DB(5) * damageState(p)%RKCK45dotState(5,1:mySizeDamageDotState,cc) &
+ DB(6) * damageState(p)%RKCK45dotState(6,1:mySizeDamageDotState,cc) &
) * crystallite_subdt(g,i,e)
thermalStateResiduum(1:mySizethermalDotState,g,i,e) = &
( DB(1) * thermalState(p)%RKCK45dotState(1,1:mySizeThermalDotState,cc) &
+ DB(2) * thermalState(p)%RKCK45dotState(2,1:mySizeThermalDotState,cc) &
+ DB(3) * thermalState(p)%RKCK45dotState(3,1:mySizeThermalDotState,cc) &
+ DB(4) * thermalState(p)%RKCK45dotState(4,1:mySizeThermalDotState,cc) &
+ DB(5) * thermalState(p)%RKCK45dotState(5,1:mySizeThermalDotState,cc) &
+ DB(6) * thermalState(p)%RKCK45dotState(6,1:mySizeThermalDotState,cc) &
) * crystallite_subdt(g,i,e)
! --- dot state ---
plasticState(p)%dotState (:,cc) = B(1) * plasticState(p)%RKCK45dotState(1,:,cc) &
+ B(2) * plasticState(p)%RKCK45dotState(2,:,cc) &
+ B(3) * plasticState(p)%RKCK45dotState(3,:,cc) &
+ B(4) * plasticState(p)%RKCK45dotState(4,:,cc) &
+ B(5) * plasticState(p)%RKCK45dotState(5,:,cc) &
+ B(6) * plasticState(p)%RKCK45dotState(6,:,cc)
damageState(p)%dotState (:,cc) = B(1) * damageState( p)%RKCK45dotState(1,:,cc) &
+ B(2) * damageState( p)%RKCK45dotState(2,:,cc) &
+ B(3) * damageState( p)%RKCK45dotState(3,:,cc) &
+ B(4) * damageState( p)%RKCK45dotState(4,:,cc) &
+ B(5) * damageState( p)%RKCK45dotState(5,:,cc) &
+ B(6) * damageState( p)%RKCK45dotState(6,:,cc)
thermalState(p)%dotState (:,cc) = B(1) * thermalState(p)%RKCK45dotState(1,:,cc) &
+ B(2) * thermalState(p)%RKCK45dotState(2,:,cc) &
+ B(3) * thermalState(p)%RKCK45dotState(3,:,cc) &
+ B(4) * thermalState(p)%RKCK45dotState(4,:,cc) &
+ B(5) * thermalState(p)%RKCK45dotState(5,:,cc) &
+ B(6) * thermalState(p)%RKCK45dotState(6,:,cc)
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- state and update ---
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,cc)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
plasticState(p)%state(1:mySizePlasticDotState,cc) = plasticState(p)%subState0(1:mySizePlasticDotState,cc)&
+ plasticState(p)%dotState (1:mySizePlasticDotState,cc)&
* crystallite_subdt(g,i,e)
damageState(p)%state (1:mySizeDamageDotState,cc) = damageState(p)%subState0(1:mySizeDamageDotState,cc)&
+ damageState(p)%dotState (1:mySizeDamageDotState,cc)&
* crystallite_subdt(g,i,e)
thermalState(p)%state(1:mySizeThermalDotState,cc) = thermalState(p)%subState0(1:mySizeThermalDotState,cc)&
+ thermalState(p)%dotState (1:mySizeThermalDotState,cc)&
* crystallite_subdt(g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- relative residui and state convergence ---
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,cc,s)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
cc = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
forall (s = 1_pInt:mySizePlasticDotState, abs(plasticState(p)%state(s,cc)) > 0.0_pReal) &
relStateResiduum(s,g,i,e) = stateResiduum(s,g,i,e) / plasticState(p)%state(s,cc)
forall (s = 1_pInt:mySizeDamageDotState, abs(damageState( p)%state(s,cc)) > 0.0_pReal) &
relDamageStateResiduum(s,g,i,e) = damageStateResiduum(s,g,i,e) / damageState(p)%state(s,cc)
forall (s = 1_pInt:mySizeThermalDotState, abs(thermalState(p)%state(s,cc)) > 0.0_pReal) &
relThermalStateResiduum(s,g,i,e) = thermalStateResiduum(s,g,i,e) / thermalState(p)%state(s,cc)
!$OMP FLUSH(relStateResiduum)
!$OMP FLUSH(relDamageStateResiduum)
!$OMP FLUSH(relThermalStateResiduum)
! @Martin: do we need flushing? why..?
crystallite_todo(g,i,e) = &
( all(abs(relStateResiduum(1:mySizePlasticDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(stateResiduum(1:mySizePlasticDotState,g,i,e)) < &
plasticState(p)%aTolState(1:mySizePlasticDotState)) &
.and. all(abs(relDamageStateResiduum(1:mySizeDamageDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(damageStateResiduum(1:mySizeDamageDotState,g,i,e)) < &
damageState(p)%aTolState(1:mySizeDamageDotState)) &
.and. all(abs(relThermalStateResiduum(1:mySizeThermalDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(thermalStateResiduum(1:mySizeThermalDotState,g,i,e)) < &
thermalState(p)%aTolState(1:mySizeThermalDotState)))
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt&
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i3,1x,i3,/)') '<< CRYST >> updateState at el ip g ',e,i,g
write(6,'(a,/,(12x,12(f12.1,1x)),/)') '<< CRYST >> absolute residuum tolerance', &
stateResiduum(1:mySizePlasticDotState,g,i,e) / plasticState(p)%aTolState(1:mySizePlasticDotState)
write(6,'(a,/,(12x,12(f12.1,1x)),/)') '<< CRYST >> relative residuum tolerance', &
relStateResiduum(1:mySizePlasticDotState,g,i,e) / rTol_crystalliteState
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> dotState', &
plasticState(p)%dotState(1:mySizePlasticDotState,cc)
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state', &
plasticState(p)%state(1:mySizePlasticDotState,cc)
endif
#endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- STATE JUMP ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!--------------------------------------------------------------------------------------------------
! --- UPDATE DEPENDENT STATES IF RESIDUUM BELOW TOLERANCE ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_microstructure(crystallite_temperature(i,e), crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
endif
enddo; enddo; enddo
!$OMP ENDDO
!--------------------------------------------------------------------------------------------------
! --- FINAL STRESS INTEGRATION STEP IF RESIDUUM BELOW TOLERANCE ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!--------------------------------------------------------------------------------------------------
! --- SET CONVERGENCE FLAG ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
crystallite_converged(g,i,e) = .true. ! if still "to do" then converged per definition
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(6,numerics_integrationMode) = &
debug_StateLoopDistribution(6,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
! --- nonlocal convergence check ---
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i8,a,i2,/)') '<< CRYST >> ', count(crystallite_converged(:,:,:)), ' grains converged' ! if not requesting Integration of just a single IP
if ((.not. singleRun) .and. any(.not. crystallite_converged .and. .not. crystallite_localPlasticity)) & ! any non-local not yet converged (or broken)...
crystallite_converged = crystallite_converged .and. crystallite_localPlasticity ! ...restart all non-local as not converged
end subroutine crystallite_integrateStateRKCK45
!--------------------------------------------------------------------------------------------------
!> @brief integrate stress, state with 1st order Euler method with adaptive step size
!--------------------------------------------------------------------------------------------------
subroutine crystallite_integrateStateAdaptiveEuler()
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_StateLoopDistribution
use numerics, only: &
rTol_crystalliteState, &
numerics_integrationMode
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips
use material, only: &
homogenization_Ngrains, &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_maxNgrains
use constitutive, only: &
constitutive_collectDotState, &
constitutive_microstructure, &
constitutive_maxSizeDotState
use constitutive_damage, only: &
constitutive_damage_collectDotState, &
constitutive_damage_microstructure, &
constitutive_damage_maxSizeDotState
use constitutive_thermal, only: &
constitutive_thermal_collectDotState, &
constitutive_thermal_microstructure, &
constitutive_thermal_maxSizeDotState
implicit none
integer(pInt) :: &
e, & ! element index in element loop
i, & ! integration point index in ip loop
g, & ! grain index in grain loop
s, & ! state index
p, &
c, &
mySizePlasticDotState, & ! size of dot states
mySizeDamageDotState, &
mySizeThermalDotState
integer(pInt), dimension(2) :: &
eIter ! bounds for element iteration
integer(pInt), dimension(2,mesh_NcpElems) :: &
iIter, & ! bounds for ip iteration
gIter ! bounds for grain iteration
real(pReal), dimension(constitutive_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
stateResiduum, & ! residuum from evolution in micrstructure
relStateResiduum ! relative residuum from evolution in microstructure
real(pReal), dimension(constitutive_damage_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
damageStateResiduum, & ! residuum from evolution in micrstructure
relDamageStateResiduum ! relative residuum from evolution in microstructure
real(pReal), dimension(constitutive_thermal_maxSizeDotState,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems) :: &
thermalStateResiduum, & ! residuum from evolution in micrstructure
relThermalStateResiduum ! relative residuum from evolution in microstructure
logical :: &
singleRun ! flag indicating computation for single (g,i,e) triple
! --- LOOP ITERATOR FOR ELEMENT, GRAIN, IP ---
eIter = FEsolving_execElem(1:2)
do e = eIter(1),eIter(2)
iIter(1:2,e) = FEsolving_execIP(1:2,e)
gIter(1:2,e) = [ 1_pInt,homogenization_Ngrains(mesh_element(3,e))]
enddo
singleRun = (eIter(1) == eIter(2) .and. iIter(1,eIter(1)) == iIter(2,eIter(2)))
stateResiduum = 0.0_pReal
relStateResiduum = 0.0_pReal
damageStateResiduum = 0.0_pReal
relDamageStateResiduum = 0.0_pReal
thermalStateResiduum = 0.0_pReal
relThermalStateResiduum = 0.0_pReal
integrationMode: if (numerics_integrationMode == 1_pInt) then
!$OMP PARALLEL
! --- DOT STATE (EULER INTEGRATION) ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e )
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or. &
any(damageState( p)%dotState(:,c) /= damageState( p)%dotState(:,c)) .or. &
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- STATE UPDATE (EULER INTEGRATION) ---
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
stateResiduum(1:mySizePlasticDotState,g,i,e) = - 0.5_pReal &
* plasticState(p)%dotstate(1:mySizePlasticDotState,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
damageStateResiduum(1:mySizeDamageDotState,g,i,e) = - 0.5_pReal &
* damageState(p)%dotstate(1:mySizeDamageDotState,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
thermalStateResiduum(1:mySizeThermalDotState,g,i,e) = - 0.5_pReal &
* thermalState(p)%dotstate(1:mySizeThermalDotState,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
plasticState(p)%state(1:mySizePlasticDotState,c) = plasticState(p)%state(1:mySizePlasticDotState,c) &
+ plasticState(p)%dotstate(1:mySizePlasticDotState,c) &
* crystallite_subdt(g,i,e)
damageState(p)%state(1:mySizeDamageDotState,c) = damageState(p)%state(1:mySizeDamageDotState,c) &
+ damageState(p)%dotstate(1:mySizeDamageDotState,c) &
* crystallite_subdt(g,i,e)
thermalState(p)%state(1:mySizeThermalDotState,c) = thermalState(p)%state(1:mySizeThermalDotState,c) &
+ thermalState(p)%dotstate(1:mySizeThermalDotState,c) &
* crystallite_subdt(g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- STATE JUMP ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- UPDATE DEPENDENT STATES (EULER INTEGRATION) ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) &
call constitutive_microstructure(crystallite_temperature(i,e), crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
endif integrationMode
! --- STRESS INTEGRATION (EULER INTEGRATION) ---
!$OMP PARALLEL DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP END PARALLEL DO
if (numerics_integrationMode == 1_pInt) then
!$OMP PARALLEL
! --- DOT STATE (HEUN METHOD) ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) &
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or.&
any(damageState( p)%dotState(:,c) /= damageState( p)%dotState(:,c)) .or.&
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- ERROR ESTIMATE FOR STATE (HEUN METHOD) ---
!$OMP SINGLE
relStateResiduum = 0.0_pReal
relDamageStateResiduum = 0.0_pReal
relThermalStateResiduum = 0.0_pReal
!$OMP END SINGLE
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,c,s)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState(p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
! --- contribution of heun step to absolute residui ---
stateResiduum(1:mySizePlasticDotState,g,i,e) = stateResiduum(1:mySizePlasticDotState,g,i,e) &
+ 0.5_pReal * plasticState(p)%dotState(:,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
damageStateResiduum(1:mySizeDamageDotState,g,i,e) = damageStateResiduum(1:mySizeDamageDotState,g,i,e) &
+ 0.5_pReal * damageState(p)%dotState(:,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
thermalStateResiduum(1:mySizeThermalDotState,g,i,e) = thermalStateResiduum(1:mySizeThermalDotState,g,i,e) &
+ 0.5_pReal * thermalState(p)%dotState(:,c) &
* crystallite_subdt(g,i,e) ! contribution to absolute residuum in state
!$OMP FLUSH(stateResiduum)
!$OMP FLUSH(damageStateResiduum)
!$OMP FLUSH(thermalStateResiduum)
! --- relative residui ---
forall (s = 1_pInt:mySizePlasticDotState, abs(plasticState(p)%dotState(s,c)) > 0.0_pReal) &
relStateResiduum(s,g,i,e) = stateResiduum(s,g,i,e) / plasticState(p)%dotState(s,c)
forall (s = 1_pInt:mySizeDamageDotState, abs(damageState(p)%dotState(s,c)) > 0.0_pReal) &
relDamageStateResiduum(s,g,i,e) = damageStateResiduum(s,g,i,e) / damageState(p)%dotState(s,c)
forall (s = 1_pInt:mySizeThermalDotState, abs(thermalState(p)%dotState(s,c)) > 0.0_pReal) &
relThermalStateResiduum(s,g,i,e) = thermalStateResiduum(s,g,i,e) / thermalState(p)%dotState(s,c)
!$OMP FLUSH(relStateResiduum)
!$OMP FLUSH(relDamageStateResiduum)
!$OMP FLUSH(relthermalStateResiduum)
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i2,1x,i3,/)') '<< CRYST >> updateState at el ip g ',e,i,g
write(6,'(a,/,(12x,12(f12.1,1x)),/)') '<< CRYST >> absolute residuum tolerance', &
stateResiduum(1:mySizePlasticDotState,g,i,e) / plasticState(p)%aTolState(1:mySizePlasticDotState)
write(6,'(a,/,(12x,12(f12.1,1x)),/)') '<< CRYST >> relative residuum tolerance', &
relStateResiduum(1:mySizePlasticDotState,g,i,e) / rTol_crystalliteState
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> dotState', plasticState(p)%dotState(1:mySizePlasticDotState,c) &
- 2.0_pReal * stateResiduum(1:mySizePlasticDotState,g,i,e) / crystallite_subdt(g,i,e) ! calculate former dotstate from higher order solution and state residuum
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state', plasticState(p)%state(1:mySizePlasticDotState,c)
endif
#endif
! --- converged ? ---
if ( all(abs(relStateResiduum(1:mySizePlasticDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(stateResiduum(1:mySizePlasticDotState,g,i,e)) < &
plasticState(p)%aTolState(1:mySizePlasticDotState)) &
.and. all(abs(relDamageStateResiduum(1:mySizeDamageDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(damageStateResiduum(1:mySizeDamageDotState,g,i,e)) < &
damageState(p)%aTolState(1:mySizeDamageDotState)) &
.and. all(abs(relThermalStateResiduum(1:mySizeThermalDotState,g,i,e)) < &
rTol_crystalliteState .or. &
abs(thermalStateResiduum(1:mySizeThermalDotState,g,i,e)) < &
thermalState(p)%aTolState(1:mySizeThermalDotState))) then
crystallite_converged(g,i,e) = .true. ! ... converged per definitionem
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(2,numerics_integrationMode) = &
debug_StateLoopDistribution(2,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
elseif (numerics_integrationMode > 1) then ! stiffness calculation
!$OMP PARALLEL DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
crystallite_converged(g,i,e) = .true. ! ... converged per definitionem
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(2,numerics_integrationMode) = &
debug_StateLoopDistribution(2,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
enddo; enddo; enddo
!$OMP END PARALLEL DO
endif
! --- NONLOCAL CONVERGENCE CHECK ---
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i8,a,i2,/)') '<< CRYST >> ', count(crystallite_converged(:,:,:)), ' grains converged'
if ((.not. singleRun) .and. any(.not. crystallite_converged .and. .not. crystallite_localPlasticity)) & ! any non-local not yet converged (or broken)...
crystallite_converged = crystallite_converged .and. crystallite_localPlasticity ! ...restart all non-local as not converged
end subroutine crystallite_integrateStateAdaptiveEuler
!--------------------------------------------------------------------------------------------------
!> @brief integrate stress, and state with 1st order explicit Euler method
!--------------------------------------------------------------------------------------------------
subroutine crystallite_integrateStateEuler()
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_StateLoopDistribution
use numerics, only: &
numerics_integrationMode, &
numerics_timeSyncing
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems
use material, only: &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_Ngrains
use constitutive, only: &
constitutive_collectDotState, &
constitutive_microstructure
use constitutive_damage, only: &
constitutive_damage_collectDotState, &
constitutive_damage_microstructure
use constitutive_thermal, only: &
constitutive_thermal_collectDotState, &
constitutive_thermal_microstructure
implicit none
integer(pInt) :: &
e, & ! element index in element loop
i, & ! integration point index in ip loop
g, & ! grain index in grain loop
p, & ! phase loop
c, &
mySizePlasticDotState, &
mySizeDamageDotState, &
mySizeThermalDotState
integer(pInt), dimension(2) :: &
eIter ! bounds for element iteration
integer(pInt), dimension(2,mesh_NcpElems) :: &
iIter, & ! bounds for ip iteration
gIter ! bounds for grain iteration
logical :: &
singleRun ! flag indicating computation for single (g,i,e) triple
eIter = FEsolving_execElem(1:2)
do e = eIter(1),eIter(2)
iIter(1:2,e) = FEsolving_execIP(1:2,e)
gIter(1:2,e) = [ 1_pInt,homogenization_Ngrains(mesh_element(3,e))]
enddo
singleRun = (eIter(1) == eIter(2) .and. iIter(1,eIter(1)) == iIter(2,eIter(2)))
if (numerics_integrationMode == 1_pInt) then
!$OMP PARALLEL
! --- DOT STATE ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) &
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
c = mappingConstitutive(1,g,i,e)
p = mappingConstitutive(2,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or. &
any(damageState( p)%dotState(:,c) /= damageState( p)%dotState(:,c)) .or. &
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e) .and. .not. numerics_timeSyncing) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
else ! if broken local...
crystallite_todo(g,i,e) = .false. ! ... skip this one next time
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- UPDATE STATE ---
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
plasticState(p)%state(1:mySizePlasticDotState,c) = plasticState(p)%state( 1:mySizePlasticDotState,c) &
+ plasticState(p)%dotState(1:mySizePlasticDotState,c) &
* crystallite_subdt(g,i,e)
damageState( p)%state(1:mySizeDamageDotState,c) = damageState( p)%state( 1:mySizeDamageDotState,c) &
+ damageState( p)%dotState(1:mySizeDamageDotState,c) &
* crystallite_subdt(g,i,e)
thermalState(p)%state(1:mySizeThermalDotState,c) = thermalState(p)%state( 1:mySizeThermalDotState,c) &
+ thermalState(p)%dotState(1:mySizeThermalDotState,c) &
* crystallite_subdt(g,i,e)
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
write(6,'(a,i8,1x,i2,1x,i3,/)') '<< CRYST >> update state at el ip g ',e,i,g
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> dotState', plasticState(p)%dotState (1:mySizePlasticDotState,c)
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state', plasticState(p)%state (1:mySizePlasticDotState,c)
endif
#endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- STATE JUMP ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e) & ! if broken non-local...
.and. .not. numerics_timeSyncing) then
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- UPDATE DEPENDENT STATES ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) &
call constitutive_microstructure(crystallite_temperature(i,e), crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
endif
!$OMP PARALLEL
! --- STRESS INTEGRATION ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e) & ! if broken non-local...
.and. .not. numerics_timeSyncing) then
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- SET CONVERGENCE FLAG ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
crystallite_converged(g,i,e) = .true. ! if still "to do" then converged per definitionem
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(1,numerics_integrationMode) = &
debug_StateLoopDistribution(1,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
! --- CHECK NON-LOCAL CONVERGENCE ---
if (.not. singleRun) then ! if not requesting Integration of just a single IP
if (any(.not. crystallite_converged .and. .not. crystallite_localPlasticity) & ! any non-local not yet converged (or broken)...
.and. .not. numerics_timeSyncing) &
crystallite_converged = crystallite_converged .and. crystallite_localPlasticity ! ...restart all non-local as not converged
endif
end subroutine crystallite_integrateStateEuler
!--------------------------------------------------------------------------------------------------
!> @brief integrate stress, state with adaptive 1st order explicit Euler method
!> using Fixed Point Iteration to adapt the stepsize
!--------------------------------------------------------------------------------------------------
subroutine crystallite_integrateStateFPI()
use debug, only: &
debug_e, &
debug_i, &
debug_g, &
debug_level,&
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_StateLoopDistribution
use numerics, only: &
nState, &
numerics_integrationMode, &
rTol_crystalliteState
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems
use material, only: &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_Ngrains
use constitutive, only: &
constitutive_collectDotState, &
constitutive_microstructure, &
constitutive_maxSizeDotState
use constitutive_damage, only: &
constitutive_damage_collectDotState, &
constitutive_damage_microstructure, &
constitutive_damage_maxSizeDotState
use constitutive_thermal, only: &
constitutive_thermal_collectDotState, &
constitutive_thermal_microstructure, &
constitutive_thermal_maxSizeDotState
implicit none
integer(pInt) :: &
NiterationState, & !< number of iterations in state loop
e, & !< element index in element loop
i, & !< integration point index in ip loop
g, & !< grain index in grain loop
p, &
c, &
mySizePlasticDotState, & ! size of dot states
mySizeDamageDotState, &
mySizeThermalDotState, &
ss
integer(pInt), dimension(2) :: &
eIter ! bounds for element iteration
integer(pInt), dimension(2,mesh_NcpElems) :: &
iIter, & ! bounds for ip iteration
gIter ! bounds for grain iteration
real(pReal) :: &
dot_prod12, &
dot_prod22, &
stateDamper, & ! damper for integration of state
damageStateDamper, &
thermalStateDamper
real(pReal), dimension(constitutive_maxSizeDotState) :: &
stateResiduum, &
tempState
real(pReal), dimension(constitutive_damage_maxSizeDotState) :: &
damageStateResiduum, & ! residuum from evolution in micrstructure
tempDamageState
real(pReal), dimension(constitutive_thermal_maxSizeDotState) :: &
thermalStateResiduum, & ! residuum from evolution in micrstructure
tempThermalState
logical :: &
singleRun, & ! flag indicating computation for single (g,i,e) triple
doneWithIntegration
eIter = FEsolving_execElem(1:2)
do e = eIter(1),eIter(2)
iIter(1:2,e) = FEsolving_execIP(1:2,e)
gIter(1:2,e) = [ 1_pInt,homogenization_Ngrains(mesh_element(3,e))]
enddo
singleRun = (eIter(1) == eIter(2) .and. iIter(1,eIter(1)) == iIter(2,eIter(2)))
!--------------------------------------------------------------------------------------------------
! initialize dotState
if (.not. singleRun) then
forall(p = 1_pInt:size(plasticState))
plasticState(p)%previousDotState = 0.0_pReal
plasticState(p)%previousDotState2 = 0.0_pReal
end forall
forall(p = 1_pInt:size(damageState))
damageState(p)%previousDotState = 0.0_pReal
damageState(p)%previousDotState2 = 0.0_pReal
end forall
forall(p = 1_pInt:size(thermalState))
thermalState(p)%previousDotState = 0.0_pReal
thermalState(p)%previousDotState2 = 0.0_pReal
end forall
else
e = eIter(1)
i = iIter(1,e)
do g = gIter(1,e), gIter(2,e)
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
plasticState(p)%previousDotState (:,c) = 0.0_pReal
plasticState(p)%previousDotState2(:,c) = 0.0_pReal
damageState( p)%previousDotState (:,c) = 0.0_pReal
damageState( p)%previousDotState2(:,c) = 0.0_pReal
thermalState(p)%previousDotState (:,c) = 0.0_pReal
thermalState(p)%previousDotState2(:,c) = 0.0_pReal
enddo
endif
! --+>> PREGUESS FOR STATE <<+--
! --- DOT STATES ---
!$OMP PARALLEL
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or. &
any(damageState( p)%dotState(:,c) /= damageState( p)%dotState(:,c)) .or. &
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then !NaN occured in dotState
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken is a non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals done (and broken)
!$OMP END CRITICAL (checkTodo)
else ! broken one was local...
crystallite_todo(g,i,e) = .false. ! ... done (and broken)
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- UPDATE STATE ---
!$OMP DO PRIVATE(mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState,p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
plasticState(p)%state(1:mySizePlasticDotState,c) = plasticState(p)%subState0(1:mySizePlasticDotState,c) &
+ plasticState(p)%dotState (1:mySizePlasticDotState,c) &
* crystallite_subdt(g,i,e)
damageState( p)%state(1:mySizeDamageDotState,c) = damageState( p)%subState0(1:mySizeDamageDotState,c) &
+ damageState( p)%dotState (1:mySizeDamageDotState,c) &
* crystallite_subdt(g,i,e)
thermalState(p)%state(1:mySizeThermalDotState,c) = thermalState(p)%subState0(1:mySizeThermalDotState,c) &
+ thermalState(p)%dotState (1:mySizeThermalDotState,c) &
* crystallite_subdt(g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
! --+>> STATE LOOP <<+--
NiterationState = 0_pInt
doneWithIntegration = .false.
crystalliteLooping: do while (.not. doneWithIntegration .and. NiterationState < nState)
NiterationState = NiterationState + 1_pInt
!$OMP PARALLEL
! --- UPDATE DEPENDENT STATES ---
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
call constitutive_microstructure(crystallite_temperature(i,e), crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Fp(1:3,1:3,g,i,e), g, i, e) ! update dependent state variables to be consistent with basic states
call constitutive_damage_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
call constitutive_thermal_microstructure(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e) ! update dependent state variables to be consistent with basic states
endif
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
plasticState(p)%previousDotState2(:,c) = plasticState(p)%previousDotState(:,c)
damageState( p)%previousDotState2(:,c) = damageState( p)%previousDotState(:,c)
thermalState(p)%previousDotState2(:,c) = thermalState(p)%previousDotState(:,c)
plasticState(p)%previousDotState (:,c) = plasticState(p)%dotState(:,c)
damageState( p)%previousDotState (:,c) = damageState( p)%dotState(:,c)
thermalState(p)%previousDotState (:,c) = thermalState(p)%dotState(:,c)
enddo; enddo; enddo
!$OMP ENDDO
! --- STRESS INTEGRATION ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
crystallite_todo(g,i,e) = crystallite_integrateStress(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e) .and. .not. crystallite_localPlasticity(g,i,e)) then ! broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ... then all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP SINGLE
!$OMP CRITICAL (write2out)
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i8,a)') '<< CRYST >> ', count(crystallite_todo(:,:,:)),' grains todo after stress integration'
!$OMP END CRITICAL (write2out)
!$OMP END SINGLE
! --- DOT STATE ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
call constitutive_collectDotState(crystallite_Tstar_v(1:6,g,i,e), crystallite_Fe, &
crystallite_Fp, crystallite_temperature(i,e), &
crystallite_subdt(g,i,e), crystallite_subFrac, g,i,e)
call constitutive_damage_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Fe(1:3,1:3,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
call constitutive_thermal_collectDotState(crystallite_Tstar_v(1:6,g,i,e), &
crystallite_Lp(1:3,1:3,g,i,e), &
g,i,e)
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP DO PRIVATE(p,c)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if ( any(plasticState(p)%dotState(:,c) /= plasticState(p)%dotState(:,c)) .or. &
any(damageState( p)%dotState(:,c) /= damageState( p)%dotState(:,c)) .or. &
any(thermalState(p)%dotState(:,c) /= thermalState(p)%dotState(:,c))) then ! NaN occured in dotState
crystallite_todo(g,i,e) = .false. ! ... skip me next time
if (.not. crystallite_localPlasticity(g,i,e)) then ! if me is non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- UPDATE STATE ---
!$OMP DO PRIVATE(dot_prod12,dot_prod22, &
!$OMP& mySizePlasticDotState,mySizeDamageDotState,mySizeThermalDotState, &
!$OMP& damageStateResiduum,thermalStateResiduum,damageStateDamper,thermalStateDamper, &
!$OMP& tempDamageState,tempThermalState,p,c, &
!$OMP& statedamper,stateResiduum,tempState)
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
mySizePlasticDotState = plasticState(p)%sizeDotState
mySizeDamageDotState = damageState( p)%sizeDotState
mySizeThermalDotState = thermalState(p)%sizeDotState
dot_prod12 = dot_product(plasticState(p)%dotState(:,c) - plasticState(p)%previousDotState(:,c), &
plasticState(p)%previousDotState(:,c) - plasticState(p)%previousDotState2(:,c))
dot_prod22 = dot_product(plasticState(p)%previousDotState(:,c) - plasticState(p)%previousDotState2(:,c), &
plasticState(p)%previousDotState(:,c) - plasticState(p)%previousDotState2(:,c))
if ( dot_prod22 > 0.0_pReal &
.and. ( dot_prod12 < 0.0_pReal &
.or. dot_product(plasticState(p)%dotState(:,c), &
plasticState(p)%previousDotState(:,c)) < 0.0_pReal) ) then
stateDamper = 0.75_pReal + 0.25_pReal * tanh(2.0_pReal + 4.0_pReal * dot_prod12 / dot_prod22)
else
stateDamper = 1.0_pReal
endif
dot_prod12 = dot_product(damageState(p)%dotState(:,c) - damageState(p)%previousDotState(:,c), &
damageState(p)%previousDotState(:,c) - damageState(p)%previousDotState2(:,c))
dot_prod22 = dot_product(damageState(p)%previousDotState(:,c) - damageState(p)%previousDotState2(:,c), &
damageState(p)%previousDotState(:,c) - damageState(p)%previousDotState2(:,c))
if ( dot_prod22 > 0.0_pReal &
.and. ( dot_prod12 < 0.0_pReal &
.or. dot_product(damageState(p)%dotState(:,c), &
damageState(p)%previousDotState(:,c)) < 0.0_pReal) ) then
damageStateDamper = 0.75_pReal + 0.25_pReal * tanh(2.0_pReal + 4.0_pReal * dot_prod12 / dot_prod22)
else
damageStateDamper = 1.0_pReal
endif
dot_prod12 = dot_product(thermalState(p)%dotState(:,c) - thermalState(p)%previousDotState(:,c), &
thermalState(p)%previousDotState(:,c) - thermalState(p)%previousDotState2(:,c))
dot_prod22 = dot_product(thermalState(p)%previousDotState(:,c) - thermalState(p)%previousDotState2(:,c), &
thermalState(p)%previousDotState(:,c) - thermalState(p)%previousDotState2(:,c))
if ( dot_prod22 > 0.0_pReal &
.and. ( dot_prod12 < 0.0_pReal &
.or. dot_product(thermalState(p)%dotState(:,c), &
thermalState(p)%previousDotState(:,c)) < 0.0_pReal) ) then
thermalStateDamper = 0.75_pReal + 0.25_pReal * tanh(2.0_pReal + 4.0_pReal * dot_prod12 / dot_prod22)
else
thermalStateDamper = 1.0_pReal
endif
! --- get residui ---
stateResiduum(1:mySizePlasticDotState) = plasticState(p)%state(1:mySizePlasticDotState,c) &
- plasticState(p)%subState0(1:mySizePlasticDotState,c) &
- (plasticState(p)%dotState(1:mySizePlasticDotState,c) * stateDamper &
+ plasticState(p)%previousDotState(1:mySizePlasticDotState,c) &
* (1.0_pReal - stateDamper)) * crystallite_subdt(g,i,e)
damageStateResiduum(1:mySizeDamageDotState) = damageState(p)%state(1:mySizeDamageDotState,c) &
- damageState(p)%subState0(1:mySizeDamageDotState,c) &
- (damageState(p)%dotState(1:mySizeDamageDotState,c) * damageStateDamper &
+ damageState(p)%previousDotState(1:mySizeDamageDotState,c) &
* (1.0_pReal - damageStatedamper)) * crystallite_subdt(g,i,e)
thermalStateResiduum(1:mySizeThermalDotState) = thermalState(p)%state(1:mySizeThermalDotState,c) &
- thermalState(p)%subState0(1:mySizeThermalDotState,c) &
- (thermalState(p)%dotState(1:mySizeThermalDotState,c) * thermalStateDamper &
+ thermalState(p)%previousDotState(1:mySizeThermalDotState,c) &
* (1.0_pReal - thermalStateDamper)) * crystallite_subdt(g,i,e)
! --- correct state with residuum ---
tempState(1:mySizePlasticDotState) = plasticState(p)%state(1:mySizePlasticDotState,c) &
- stateResiduum(1:mySizePlasticDotState) ! need to copy to local variable, since we cant flush a pointer in openmp
tempDamageState(1:mySizeDamageDotState) = damageState(p)%state(1:mySizeDamageDotState,c) &
- damageStateResiduum(1:mySizeDamageDotState) ! need to copy to local variable, since we cant flush a pointer in openmp
tempThermalState(1:mySizeThermalDotState) = thermalState(p)%state(1:mySizeThermalDotState,c) &
- thermalStateResiduum(1:mySizeThermalDotState) ! need to copy to local variable, since we cant flush a pointer in openmp
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i2,1x,i3,/)') '<< CRYST >> update state at el ip g ',e,i,g
write(6,'(a,f6.1,/)') '<< CRYST >> statedamper ',statedamper
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> state residuum',stateResiduum(1:mySizePlasticDotState)
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state',tempState(1:mySizePlasticDotState)
endif
#endif
! --- store corrected dotState --- (cannot do this before state update, because not sure how to flush pointers in openmp)
plasticState(p)%dotState(:,c) = plasticState(p)%dotState(:,c) * stateDamper &
+ plasticState(p)%previousDotState(:,c) &
* (1.0_pReal - stateDamper)
damageState( p)%dotState(:,c) = damageState(p)%dotState(:,c) * damageStateDamper &
+ damageState(p)%previousDotState(:,c) &
* (1.0_pReal - damageStateDamper)
thermalState(p)%dotState(:,c) = thermalState(p)%dotState(:,c) * thermalStateDamper &
+ thermalState(p)%previousDotState(:,c) &
* (1.0_pReal - thermalStateDamper)
! --- converged ? ---
if ( all( abs(stateResiduum(1:mySizePlasticDotState)) < plasticState(p)%aTolState(1:mySizePlasticDotState) &
.or. abs(stateResiduum(1:mySizePlasticDotState)) < rTol_crystalliteState &
* abs(tempState(1:mySizePlasticDotState)) ) &
.and. all( abs(damageStateResiduum(1:mySizeDamageDotState)) < damageState(p)%aTolState(1:mySizeDamageDotState) &
.or. abs(damageStateResiduum(1:mySizeDamageDotState)) < rTol_crystalliteState &
* abs(tempDamageState(1:mySizeDamageDotState)) ) &
.and. all( abs(thermalStateResiduum(1:mySizeThermalDotState)) < thermalState(p)%aTolState(1:mySizeThermalDotState) &
.or. abs(thermalStateResiduum(1:mySizeThermalDotState)) < rTol_crystalliteState &
* abs(tempThermalState(1:mySizeThermalDotState)) )) then
crystallite_converged(g,i,e) = .true. ! ... converged per definition
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionState)
debug_StateLoopDistribution(NiterationState,numerics_integrationMode) = &
debug_StateLoopDistribution(NiterationState,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionState)
endif
endif
plasticState(p)%state(1:mySizePlasticDotState,c) = tempState(1:mySizePlasticDotState)
damageState( p)%state(1:mySizeDamageDotState, c) = tempDamageState(1:mySizeDamageDotState)
thermalState(p)%state(1:mySizeThermalDotState,c) = tempThermalState(1:mySizeThermalDotState)
endif
enddo; enddo; enddo
!$OMP ENDDO
! --- STATE JUMP ---
!$OMP DO
do e = eIter(1),eIter(2); do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
!$OMP FLUSH(crystallite_todo)
if (crystallite_todo(g,i,e) .and. crystallite_converged(g,i,e)) then ! converged and still alive...
crystallite_todo(g,i,e) = crystallite_stateJump(g,i,e)
!$OMP FLUSH(crystallite_todo)
if (.not. crystallite_todo(g,i,e)) then ! if state jump fails, then convergence is broken
crystallite_converged(g,i,e) = .false.
if (.not. crystallite_localPlasticity(g,i,e)) then ! if broken non-local...
!$OMP CRITICAL (checkTodo)
crystallite_todo = crystallite_todo .and. crystallite_localPlasticity ! ...all non-locals skipped
!$OMP END CRITICAL (checkTodo)
endif
endif
endif
enddo; enddo; enddo
!$OMP ENDDO
!$OMP END PARALLEL
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,i8,a,i2,/)') '<< CRYST >> ', count(crystallite_converged(:,:,:)), &
' grains converged after state integration #', NiterationState
! --- NON-LOCAL CONVERGENCE CHECK ---
if (.not. singleRun) then ! if not requesting Integration of just a single IP
if (any(.not. crystallite_converged .and. .not. crystallite_localPlasticity)) & ! any non-local not yet converged (or broken)...
crystallite_converged = crystallite_converged .and. crystallite_localPlasticity ! ...restart all non-local as not converged
endif
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) then
write(6,'(a,i8,a)') '<< CRYST >> ', count(crystallite_converged(:,:,:)), &
' grains converged after non-local check'
write(6,'(a,i8,a,i2,/)') '<< CRYST >> ', count(crystallite_todo(:,:,:)), &
' grains todo after state integration #', NiterationState
endif
! --- CHECK IF DONE WITH INTEGRATION ---
doneWithIntegration = .true.
elemLoop: do e = eIter(1),eIter(2)
do i = iIter(1,e),iIter(2,e); do g = gIter(1,e),gIter(2,e) ! iterate over elements, ips and grains
if (crystallite_todo(g,i,e) .and. .not. crystallite_converged(g,i,e)) then
doneWithIntegration = .false.
exit elemLoop
endif
enddo; enddo
enddo elemLoop
enddo crystalliteLooping
end subroutine crystallite_integrateStateFPI
!--------------------------------------------------------------------------------------------------
!> @brief calculates a jump in the state according to the current state and the current stress
!> returns true, if state jump was successfull or not needed. false indicates NaN in delta state
!--------------------------------------------------------------------------------------------------
logical function crystallite_stateJump(g,i,e)
use debug, only: &
debug_level, &
debug_crystallite, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems
use material, only: &
plasticState, &
damageState, &
thermalState, &
mappingConstitutive, &
homogenization_Ngrains
use constitutive, only: &
constitutive_collectDeltaState
implicit none
integer(pInt), intent(in):: &
e, & ! element index
i, & ! integration point index
g ! grain index
integer(pInt) :: &
c, &
p, &
mySizePlasticDotState
c = mappingConstitutive(1,g,i,e)
p = mappingConstitutive(2,g,i,e)
if (constitutive_collectDeltaState(crystallite_Tstar_v(1:6,g,i,e), g,i,e)) then
mySizePlasticDotState = plasticState(p)%sizeDotState
if( any(plasticState(p)%deltaState(:,c) /= plasticState(p)%deltaState(:,c))) then ! NaN occured in deltaState
crystallite_stateJump = .false.
return
endif
plasticState(p)%state(1:mySizePlasticDotState,c) = plasticState(p)%state(1:mySizePlasticDotState,c) + &
plasticState(p)%deltaState(1:mySizePlasticDotState,c)
#ifndef _OPENMP
p = mappingConstitutive(2,g,i,e)
c = mappingConstitutive(1,g,i,e)
if (any(plasticState(p)%deltaState(1:mySizePlasticDotState,c) /= 0.0_pReal) &
.and. iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i2,1x,i3, /)') '<< CRYST >> update state at el ip g ',e,i,g
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> deltaState', plasticState(p)%deltaState(1:mySizePlasticDotState,c)
write(6,'(a,/,(12x,12(e12.5,1x)),/)') '<< CRYST >> new state', plasticState(p)%state (1:mySizePlasticDotState,c)
endif
#endif
endif
crystallite_stateJump = .true.
end function crystallite_stateJump
!--------------------------------------------------------------------------------------------------
!> @brief calculation of stress (P) with time integration based on a residuum in Lp and
!> intermediate acceleration of the Newton-Raphson correction
!--------------------------------------------------------------------------------------------------
logical function crystallite_integrateStress(&
g,& ! grain number
i,& ! integration point number
e,& ! element number
timeFraction &
)
use prec, only: pLongInt
use numerics, only: nStress, &
aTol_crystalliteStress, &
rTol_crystalliteStress, &
iJacoLpresiduum, &
numerics_integrationMode
use debug, only: debug_level, &
debug_crystallite, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_g, &
debug_cumLpCalls, &
debug_cumLpTicks, &
debug_StressLoopDistribution
use constitutive, only: constitutive_LpAndItsTangent, &
constitutive_TandItsTangent
use math, only: math_mul33x33, &
math_mul33xx33, &
math_mul66x6, &
math_mul99x99, &
math_transpose33, &
math_inv33, &
math_invert33, &
math_invert, &
math_det33, &
math_norm33, &
math_I3, &
math_identity2nd, &
math_Mandel66to3333, &
math_Mandel6to33, &
math_Mandel33to6, &
math_Plain3333to99, &
math_Plain33to9, &
math_Plain9to33
use mesh, only: mesh_element
implicit none
integer(pInt), intent(in):: e, & ! element index
i, & ! integration point index
g ! grain index
real(pReal), optional, intent(in) :: timeFraction ! fraction of timestep
!*** local variables ***!
real(pReal), dimension(3,3):: Fg_new, & ! deformation gradient at end of timestep
Fp_current, & ! plastic deformation gradient at start of timestep
Fp_new, & ! plastic deformation gradient at end of timestep
Fe_new, & ! elastic deformation gradient at end of timestep
invFp_new, & ! inverse of Fp_new
invFp_current, & ! inverse of Fp_current
Lpguess, & ! current guess for plastic velocity gradient
Lpguess_old, & ! known last good guess for plastic velocity gradient
Lp_constitutive, & ! plastic velocity gradient resulting from constitutive law
residuum, & ! current residuum of plastic velocity gradient
residuum_old, & ! last residuum of plastic velocity gradient
deltaLp, & ! direction of next guess
Tstar,& ! 2nd Piola-Kirchhoff Stress
A,&
B, &
Fe ! elastic deformation gradient
real(pReal), dimension(6):: Tstar_v ! 2nd Piola-Kirchhoff Stress in Mandel-Notation
real(pReal), dimension(9):: work ! needed for matrix inversion by LAPACK
integer(pInt), dimension(9) :: ipiv ! needed for matrix inversion by LAPACK
real(pReal), dimension(9,9) :: dLp_dT_constitutive, & ! partial derivative of plastic velocity gradient calculated by constitutive law
dT_dFe_constitutive, & ! partial derivative of 2nd Piola-Kirchhoff stress calculated by constitutive law
dFe_dLp, & ! partial derivative of elastic deformation gradient
dR_dLp, & ! partial derivative of residuum (Jacobian for NEwton-Raphson scheme)
dR_dLp2 ! working copy of dRdLp
real(pReal), dimension(3,3,3,3):: dT_dFe3333, & ! partial derivative of 2nd Piola-Kirchhoff stress
dFe_dLp3333 ! partial derivative of elastic deformation gradient
real(pReal) det, & ! determinant
steplength0, &
steplength, &
dt, & ! time increment
aTol
logical error ! flag indicating an error
integer(pInt) NiterationStress, & ! number of stress integrations
ierr, & ! error indicator for LAPACK
o, &
p, &
jacoCounter ! counter to check for Jacobian update
integer(pLongInt) tick, &
tock, &
tickrate, &
maxticks
external :: &
#if(FLOAT==8)
dgesv
#elif(FLOAT==4)
sgesv
#endif
!* be pessimistic
crystallite_integrateStress = .false.
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i8,1x,i2,1x,i3)') '<< CRYST >> integrateStress at el ip g ',e,i,g
endif
#endif
!* only integrate over fraction of timestep?
if (present(timeFraction)) then
dt = crystallite_subdt(g,i,e) * timeFraction
Fg_new = crystallite_subF0(1:3,1:3,g,i,e) &
+ (crystallite_subF(1:3,1:3,g,i,e) - crystallite_subF0(1:3,1:3,g,i,e)) * timeFraction
else
dt = crystallite_subdt(g,i,e)
Fg_new = crystallite_subF(1:3,1:3,g,i,e)
endif
!* feed local variables
Fp_current = crystallite_subFp0(1:3,1:3,g,i,e) ! "Fp_current" is only used as temp var here...
Lpguess_old = crystallite_Lp(1:3,1:3,g,i,e) ! consider present Lp good (i.e. worth remembering) ...
Lpguess = crystallite_Lp(1:3,1:3,g,i,e) ! ... and take it as first guess
!* inversion of Fp_current...
invFp_current = math_inv33(Fp_current)
if (all(invFp_current == 0.0_pReal)) then ! ... failed?
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on inversion of Fp_current at el (elFE) ip g ',&
e,'(',mesh_element(1,e),')',i,g
if (iand(debug_level(debug_crystallite), debug_levelExtensive) > 0_pInt) &
write(6,'(/,a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> Fp_current',math_transpose33(Fp_current(1:3,1:3))
endif
#endif
return
endif
A = math_mul33x33(Fg_new,invFp_current) ! intermediate tensor needed later to calculate dFe_dLp
!* start LpLoop with normal step length
NiterationStress = 0_pInt
jacoCounter = 0_pInt
steplength0 = 1.0_pReal
steplength = steplength0
residuum_old = 0.0_pReal
LpLoop: do
NiterationStress = NiterationStress + 1_pInt
loopsExeced: if (NiterationStress > nStress) then
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i3,a,i8,1x,a,i8,a,1x,i2,1x,i3,/)') '<< CRYST >> integrateStress reached loop limit',nStress, &
' at el (elFE) ip g ', e,mesh_element(1,e),i,g
#endif
return
endif loopsExeced
!* calculate (elastic) 2nd Piola--Kirchhoff stress tensor and its tangent from constitutive law
B = math_I3 - dt*Lpguess
Fe = math_mul33x33(A,B) ! current elastic deformation tensor
call constitutive_TandItsTangent(Tstar, dT_dFe3333, Fe, g,i,e) ! call constitutive law to calculate 2nd Piola-Kirchhoff stress and its derivative
Tstar_v = math_Mandel33to6(Tstar)
!* calculate plastic velocity gradient and its tangent from constitutive law
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
call system_clock(count=tick,count_rate=tickrate,count_max=maxticks)
endif
call constitutive_LpAndItsTangent(Lp_constitutive, dLp_dT_constitutive, Tstar_v, &
crystallite_temperature(i,e), g, i, e)
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
call system_clock(count=tock,count_rate=tickrate,count_max=maxticks)
!$OMP CRITICAL (debugTimingLpTangent)
debug_cumLpCalls = debug_cumLpCalls + 1_pInt
debug_cumLpTicks = debug_cumLpTicks + tock-tick
!$OMP FLUSH (debug_cumLpTicks)
if (tock < tick) debug_cumLpTicks = debug_cumLpTicks + maxticks
!$OMP END CRITICAL (debugTimingLpTangent)
endif
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,i3,/)') '<< CRYST >> iteration ', NiterationStress
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> Lp_constitutive', math_transpose33(Lp_constitutive)
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> Lpguess', math_transpose33(Lpguess)
endif
#endif
!* update current residuum and check for convergence of loop
aTol = max(rTol_crystalliteStress * max(math_norm33(Lpguess),math_norm33(Lp_constitutive)), & ! absolute tolerance from largest acceptable relative error
aTol_crystalliteStress) ! minimum lower cutoff
residuum = Lpguess - Lp_constitutive
if (any(residuum /= residuum)) then ! NaN in residuum...
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3,a)') '<< CRYST >> integrateStress encountered NaN at el (elFE) ip g ', &
e,mesh_element(1,e),i,g, &
' ; iteration ', NiterationStress,&
' >> returning..!'
#endif
return ! ...me = .false. to inform integrator about problem
elseif (math_norm33(residuum) < aTol) then ! converged if below absolute tolerance
exit LpLoop ! ...leave iteration loop
elseif (math_norm33(residuum) < math_norm33(residuum_old) .or. NiterationStress == 1_pInt ) then ! not converged, but improved norm of residuum (always proceed in first iteration)...
residuum_old = residuum ! ...remember old values and...
Lpguess_old = Lpguess
steplength = steplength0 ! ...proceed with normal step length (calculate new search direction)
else ! not converged and residuum not improved...
steplength = 0.5_pReal * steplength ! ...try with smaller step length in same direction
Lpguess = Lpguess_old + steplength * deltaLp
cycle LpLoop
endif
!* calculate Jacobian for correction term
if (mod(jacoCounter, iJacoLpresiduum) == 0_pInt) then
dFe_dLp3333 = 0.0_pReal
do o=1_pInt,3_pInt; do p=1_pInt,3_pInt
dFe_dLp3333(o,p,1:3,p) = A(o,1:3) ! dFe_dLp(i,j,k,l) = -dt * A(i,k) delta(l,j)
enddo; enddo
dFe_dLp3333 = -dt * dFe_dLp3333
dFe_dLp = math_Plain3333to99(dFe_dLp3333)
dT_dFe_constitutive = math_Plain3333to99(dT_dFe3333)
dR_dLp = math_identity2nd(9_pInt) - &
math_mul99x99(dLp_dT_constitutive, math_mul99x99(dT_dFe_constitutive , dFe_dLp))
dR_dLp2 = dR_dLp ! will be overwritten in first call to LAPACK routine
work = math_plain33to9(residuum)
#if(FLOAT==8)
call dgesv(9,1,dR_dLp2,9,ipiv,work,9,ierr) ! solve dR/dLp * delta Lp = -res for dR/dLp
#elif(FLOAT==4)
call sgesv(9,1,dR_dLp2,9,ipiv,work,9,ierr) ! solve dR/dLp * delta Lp = -res for dR/dLp
#endif
if (ierr /= 0_pInt) then
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on dR/dLp inversion at el ip g ', &
e,mesh_element(1,e),i,g
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,*)
write(6,'(a,/,9(12x,9(e15.3,1x)/))') '<< CRYST >> dR_dLp',transpose(dR_dLp)
write(6,'(a,/,9(12x,9(e15.3,1x)/))') '<< CRYST >> dFe_dLp',transpose(dFe_dLp)
write(6,'(a,/,9(12x,9(e15.3,1x)/))') '<< CRYST >> dT_dFe_constitutive',transpose(dT_dFe_constitutive)
write(6,'(a,/,9(12x,9(e15.3,1x)/))') '<< CRYST >> dLp_dT_constitutive',transpose(dLp_dT_constitutive)
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> A',math_transpose33(A)
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> B',math_transpose33(B)
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> Lp_constitutive',math_transpose33(Lp_constitutive)
write(6,'(a,/,3(12x,3(e20.7,1x)/))') '<< CRYST >> Lpguess',math_transpose33(Lpguess)
endif
endif
#endif
return
endif
deltaLp = - math_plain9to33(work)
endif
jacoCounter = jacoCounter + 1_pInt ! increase counter for jaco update
Lpguess = Lpguess + steplength * deltaLp
enddo LpLoop
!* calculate new plastic and elastic deformation gradient
invFp_new = math_mul33x33(invFp_current,B)
invFp_new = invFp_new / math_det33(invFp_new)**(1.0_pReal/3.0_pReal) ! regularize by det
call math_invert33(invFp_new,Fp_new,det,error)
if (error .or. any(Fp_new /= Fp_new)) then
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on invFp_new inversion at el ip g ',&
e,mesh_element(1,e),i,g, ' ; iteration ', NiterationStress
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) &
write(6,'(/,a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> invFp_new',math_transpose33(invFp_new)
endif
#endif
return
endif
Fe_new = math_mul33x33(Fg_new,invFp_new) ! calc resulting Fe
!* calculate 1st Piola-Kirchhoff stress
crystallite_P(1:3,1:3,g,i,e) = math_mul33x33(Fe_new, math_mul33x33(math_Mandel6to33(Tstar_v), &
math_transpose33(invFp_new)))
!* store local values in global variables
crystallite_Lp(1:3,1:3,g,i,e) = Lpguess
crystallite_Tstar_v(1:6,g,i,e) = Tstar_v
crystallite_Fp(1:3,1:3,g,i,e) = Fp_new
crystallite_Fe(1:3,1:3,g,i,e) = Fe_new
crystallite_invFp(1:3,1:3,g,i,e) = invFp_new
!* set return flag to true
crystallite_integrateStress = .true.
#ifndef _OPENMP
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> P / MPa',math_transpose33(crystallite_P(1:3,1:3,g,i,e))*1.0e-6_pReal
write(6,'(a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> Cauchy / MPa', &
math_mul33x33(crystallite_P(1:3,1:3,g,i,e), math_transpose33(Fg_new)) * 1.0e-6_pReal / math_det33(Fg_new)
write(6,'(a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> Fe Lp Fe^-1', &
math_transpose33(math_mul33x33(Fe_new, math_mul33x33(crystallite_Lp(1:3,1:3,g,i,e), math_inv33(Fe_new)))) ! transpose to get correct print out order
write(6,'(a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> Fp',math_transpose33(crystallite_Fp(1:3,1:3,g,i,e))
endif
#endif
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
!$OMP CRITICAL (distributionStress)
debug_StressLoopDistribution(NiterationStress,numerics_integrationMode) = &
debug_StressLoopDistribution(NiterationStress,numerics_integrationMode) + 1_pInt
!$OMP END CRITICAL (distributionStress)
endif
end function crystallite_integrateStress
!--------------------------------------------------------------------------------------------------
!> @brief calculates orientations and disorientations (in case of single grain ips)
!--------------------------------------------------------------------------------------------------
subroutine crystallite_orientations
use math, only: &
math_pDecomposition, &
math_RtoQ, &
math_qConj
use FEsolving, only: &
FEsolving_execElem, &
FEsolving_execIP
use IO, only: &
IO_warning
use material, only: &
material_phase, &
homogenization_Ngrains, &
plasticState
use mesh, only: &
mesh_element, &
mesh_ipNeighborhood, &
FE_NipNeighbors, &
FE_geomtype, &
FE_celltype
use lattice, only: &
lattice_qDisorientation, &
lattice_structure
use constitutive_nonlocal, only: &
constitutive_nonlocal_updateCompatibility
implicit none
integer(pInt) &
e, & ! element index
i, & ! integration point index
g, & ! grain index
n, & ! neighbor index
neighboring_e, & ! element index of my neighbor
neighboring_i, & ! integration point index of my neighbor
myPhase, & ! phase
neighboringPhase
real(pReal), dimension(3,3) :: &
U, &
R
real(pReal), dimension(4) :: &
orientation
logical &
error
! --- CALCULATE ORIENTATION AND LATTICE ROTATION ---
!$OMP PARALLEL DO PRIVATE(error,U,R,orientation)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
do g = 1_pInt,homogenization_Ngrains(mesh_element(3,e))
! somehow this subroutine is not threadsafe, so need critical statement here; not clear, what exactly the problem is
!$OMP CRITICAL (polarDecomp)
call math_pDecomposition(crystallite_Fe(1:3,1:3,g,i,e), U, R, error) ! polar decomposition of Fe
!$OMP END CRITICAL (polarDecomp)
if (error) then
call IO_warning(650_pInt, e, i, g)
orientation = [1.0_pReal, 0.0_pReal, 0.0_pReal, 0.0_pReal] ! fake orientation
else
orientation = math_RtoQ(transpose(R))
endif
crystallite_rotation(1:4,g,i,e) = lattice_qDisorientation(crystallite_orientation0(1:4,g,i,e), & ! active rotation from ori0
orientation) ! to current orientation (with no symmetry)
crystallite_orientation(1:4,g,i,e) = orientation
enddo
enddo
enddo
!$OMP END PARALLEL DO
! --- UPDATE SOME ADDITIONAL VARIABLES THAT ARE NEEDED FOR NONLOCAL MATERIAL ---
! --- we use crystallite_orientation from above, so need a separate loop
!$OMP PARALLEL DO PRIVATE(myPhase,neighboring_e,neighboring_i,neighboringPhase)
do e = FEsolving_execElem(1),FEsolving_execElem(2)
do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
myPhase = material_phase(1,i,e) ! get my phase (non-local models make no sense with more than one grain per material point)
if (plasticState(myPhase)%nonLocal) then ! if nonlocal model
! --- calculate disorientation between me and my neighbor ---
do n = 1_pInt,FE_NipNeighbors(FE_celltype(FE_geomtype(mesh_element(2,e)))) ! loop through my neighbors
neighboring_e = mesh_ipNeighborhood(1,n,i,e)
neighboring_i = mesh_ipNeighborhood(2,n,i,e)
if (neighboring_e > 0 .and. neighboring_i > 0) then ! if neighbor exists
neighboringPhase = material_phase(1,neighboring_i,neighboring_e) ! get my neighbor's phase
if (plasticState(neighboringPhase)%nonLocal) then ! neighbor got also nonlocal plasticity
if (lattice_structure(myPhase) == lattice_structure(neighboringPhase)) then ! if my neighbor has same crystal structure like me
crystallite_disorientation(:,n,1,i,e) = &
lattice_qDisorientation( crystallite_orientation(1:4,1,i,e), &
crystallite_orientation(1:4,1,neighboring_i,neighboring_e), &
lattice_structure(myPhase)) ! calculate disorientation for given symmetry
else ! for neighbor with different phase
crystallite_disorientation(:,n,1,i,e) = [0.0_pReal, 1.0_pReal, 0.0_pReal, 0.0_pReal] ! 180 degree rotation about 100 axis
endif
else ! for neighbor with local plasticity
crystallite_disorientation(:,n,1,i,e) = [-1.0_pReal, 0.0_pReal, 0.0_pReal, 0.0_pReal] ! homomorphic identity
endif
else ! no existing neighbor
crystallite_disorientation(:,n,1,i,e) = [-1.0_pReal, 0.0_pReal, 0.0_pReal, 0.0_pReal] ! homomorphic identity
endif
enddo
! --- calculate compatibility and transmissivity between me and my neighbor ---
call constitutive_nonlocal_updateCompatibility(crystallite_orientation,i,e)
endif
enddo
enddo
!$OMP END PARALLEL DO
end subroutine crystallite_orientations
!--------------------------------------------------------------------------------------------------
!> @brief return results of particular grain
!--------------------------------------------------------------------------------------------------
function crystallite_postResults(ipc, ip, el)
use math, only: &
math_qToEuler, &
math_qToEulerAxisAngle, &
math_mul33x33, &
math_transpose33, &
math_det33, &
math_I3, &
inDeg, &
math_Mandel6to33, &
math_qMul, &
math_qConj
use mesh, only: &
mesh_element, &
mesh_ipVolume, &
mesh_ipCoordinates, &
mesh_maxNipNeighbors, &
mesh_ipNeighborhood, &
FE_NipNeighbors, &
FE_geomtype, &
FE_celltype
use material, only: &
plasticState, &
damageState, &
thermalState, &
microstructure_crystallite, &
crystallite_Noutput, &
material_phase, &
material_texture, &
homogenization_Ngrains
use constitutive, only: &
constitutive_homogenizedC, &
constitutive_postResults
use constitutive_damage, only: &
constitutive_damage_postResults
use constitutive_thermal, only: &
constitutive_thermal_postResults
implicit none
integer(pInt), intent(in):: &
el, & !< element index
ip, & !< integration point index
ipc !< grain index
#ifdef multiphysicsOut
real(pReal), dimension(1+crystallite_sizePostResults(microstructure_crystallite(mesh_element(4,el))) + &
1+plasticState(material_phase(ipc,ip,el))%sizePostResults + &
1+damageState( material_phase(ipc,ip,el))%sizePostResults + &
1+thermalState(material_phase(ipc,ip,el))%sizePostResults) :: &
crystallite_postResults
#else
real(pReal), dimension(1+crystallite_sizePostResults(microstructure_crystallite(mesh_element(4,el)))+ &
1+plasticState(material_phase(ipc,ip,el))%sizePostResults) :: &
crystallite_postResults
#endif
real(pReal), dimension(3,3) :: &
Ee
real(pReal), dimension(4) :: &
rotation
real(pReal) :: &
detF
integer(pInt) :: &
o, &
c, &
crystID, &
mySize, &
n
crystID = microstructure_crystallite(mesh_element(4,el))
crystallite_postResults = 0.0_pReal
c = 0_pInt
crystallite_postResults(c+1) = real(crystallite_sizePostResults(crystID),pReal) ! size of results from cryst
c = c + 1_pInt
do o = 1_pInt,crystallite_Noutput(crystID)
mySize = 0_pInt
select case(crystallite_outputID(o,crystID))
case (phase_ID)
mySize = 1_pInt
crystallite_postResults(c+1) = real(material_phase(ipc,ip,el),pReal) ! phaseID of grain
case (texture_ID)
mySize = 1_pInt
crystallite_postResults(c+1) = real(material_texture(ipc,ip,el),pReal) ! textureID of grain
case (volume_ID)
mySize = 1_pInt
detF = math_det33(crystallite_partionedF(1:3,1:3,ipc,ip,el)) ! V_current = det(F) * V_reference
crystallite_postResults(c+1) = detF * mesh_ipVolume(ip,el) &
/ homogenization_Ngrains(mesh_element(3,el)) ! grain volume (not fraction but absolute)
case (heat_ID)
mySize = 1_pInt
crystallite_postResults(c+1) = crystallite_heat(ipc,ip,el) ! heat production
case (orientation_ID)
mySize = 4_pInt
crystallite_postResults(c+1:c+mySize) = crystallite_orientation(1:4,ipc,ip,el) ! grain orientation as quaternion
case (eulerangles_ID)
mySize = 3_pInt
crystallite_postResults(c+1:c+mySize) = inDeg &
* math_qToEuler(crystallite_orientation(1:4,ipc,ip,el)) ! grain orientation as Euler angles in degree
case (grainrotation_ID)
mySize = 4_pInt
crystallite_postResults(c+1:c+mySize) = &
math_qToEulerAxisAngle(crystallite_rotation(1:4,ipc,ip,el)) ! grain rotation away from initial orientation as axis-angle in sample reference coordinates
crystallite_postResults(c+4) = inDeg * crystallite_postResults(c+4) ! angle in degree
case (grainrotationx_ID)
mySize = 1_pInt
rotation = math_qToEulerAxisAngle(crystallite_rotation(1:4,ipc,ip,el)) ! grain rotation away from initial orientation as axis-angle in sample reference coordinates
crystallite_postResults(c+1) = inDeg * rotation(1) * rotation(4) ! angle in degree
case (grainrotationy_ID)
mySize = 1_pInt
rotation = math_qToEulerAxisAngle(crystallite_rotation(1:4,ipc,ip,el)) ! grain rotation away from initial orientation as axis-angle in sample reference coordinates
crystallite_postResults(c+1) = inDeg * rotation(2) * rotation(4) ! angle in degree
case (grainrotationz_ID)
mySize = 1_pInt
rotation = math_qToEulerAxisAngle(crystallite_rotation(1:4,ipc,ip,el)) ! grain rotation away from initial orientation as axis-angle in sample reference coordinates
crystallite_postResults(c+1) = inDeg * rotation(3) * rotation(4) ! angle in degree
! remark: tensor output is of the form 11,12,13, 21,22,23, 31,32,33
! thus row index i is slow, while column index j is fast. reminder: "row is slow"
case (defgrad_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_transpose33(crystallite_partionedF(1:3,1:3,ipc,ip,el)),[mySize])
case (e_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = 0.5_pReal * reshape((math_mul33x33( &
math_transpose33(crystallite_partionedF(1:3,1:3,ipc,ip,el)), &
crystallite_partionedF(1:3,1:3,ipc,ip,el)) - math_I3),[mySize])
case (fe_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_transpose33(crystallite_Fe(1:3,1:3,ipc,ip,el)),[mySize])
case (ee_ID)
Ee = 0.5_pReal *(math_mul33x33(math_transpose33(crystallite_Fe(1:3,1:3,ipc,ip,el)), &
crystallite_Fe(1:3,1:3,ipc,ip,el)) - math_I3)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = reshape(Ee,[mySize])
case (fp_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_transpose33(crystallite_Fp(1:3,1:3,ipc,ip,el)),[mySize])
case (lp_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_transpose33(crystallite_Lp(1:3,1:3,ipc,ip,el)),[mySize])
case (p_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_transpose33(crystallite_P(1:3,1:3,ipc,ip,el)),[mySize])
case (s_ID)
mySize = 9_pInt
crystallite_postResults(c+1:c+mySize) = &
reshape(math_Mandel6to33(crystallite_Tstar_v(1:6,ipc,ip,el)),[mySize])
case (elasmatrix_ID)
mySize = 36_pInt
crystallite_postResults(c+1:c+mySize) = reshape(constitutive_homogenizedC(ipc,ip,el),[mySize])
case(neighboringelement_ID)
mySize = mesh_maxNipNeighbors
crystallite_postResults(c+1:c+mySize) = 0.0_pReal
forall (n = 1_pInt:FE_NipNeighbors(FE_celltype(FE_geomtype(mesh_element(2,el))))) &
crystallite_postResults(c+n) = real(mesh_ipNeighborhood(1,n,ip,el),pReal)
case(neighboringip_ID)
mySize = mesh_maxNipNeighbors
crystallite_postResults(c+1:c+mySize) = 0.0_pReal
forall (n = 1_pInt:FE_NipNeighbors(FE_celltype(FE_geomtype(mesh_element(2,el))))) &
crystallite_postResults(c+n) = real(mesh_ipNeighborhood(2,n,ip,el),pReal)
end select
c = c + mySize
enddo
crystallite_postResults(c+1) = real(plasticState(material_phase(ipc,ip,el))%sizePostResults,pReal) ! size of constitutive results
c = c + 1_pInt
if (plasticState(material_phase(ipc,ip,el))%sizePostResults > 0_pInt) &
crystallite_postResults(c+1:c+plasticState(material_phase(ipc,ip,el))%sizePostResults) = &
constitutive_postResults(crystallite_Tstar_v(1:6,ipc,ip,el), crystallite_Fe, &
crystallite_temperature(ip,el), ipc, ip, el)
c = c + plasticState(material_phase(ipc,ip,el))%sizePostResults
#ifdef multiphysicsOut
crystallite_postResults(c+1) = real(damageState(material_phase(ipc,ip,el))%sizePostResults,pReal) ! size of constitutive results
c = c + 1_pInt
if (damageState(material_phase(ipc,ip,el))%sizePostResults > 0_pInt) &
crystallite_postResults(c+1:c+damageState(material_phase(ipc,ip,el))%sizePostResults) = &
constitutive_damage_postResults(ipc, ip, el)
c = c + damageState(material_phase(ipc,ip,el))%sizePostResults
crystallite_postResults(c+1) = real(thermalState(material_phase(ipc,ip,el))%sizePostResults,pReal) ! size of constitutive results
c = c + 1_pInt
if (thermalState(material_phase(ipc,ip,el))%sizePostResults > 0_pInt) &
crystallite_postResults(c+1:c+thermalState(material_phase(ipc,ip,el))%sizePostResults) = &
constitutive_thermal_postResults(ipc, ip, el)
c = c + thermalState(material_phase(ipc,ip,el))%sizePostResults
#endif
end function crystallite_postResults
end module crystallite