DAMASK_EICMD/code/source_thermal_dissipation.f90

218 lines
11 KiB
Fortran

!--------------------------------------------------------------------------------------------------
! $Id$
!--------------------------------------------------------------------------------------------------
!> @author Pratheek Shanthraj, Max-Planck-Institut für Eisenforschung GmbH
!> @brief material subroutine for thermal source due to plastic dissipation
!> @details to be done
!--------------------------------------------------------------------------------------------------
module source_thermal_dissipation
use prec, only: &
pReal, &
pInt
implicit none
private
integer(pInt), dimension(:), allocatable, public, protected :: &
source_thermal_dissipation_sizePostResults, & !< cumulative size of post results
source_thermal_dissipation_offset, & !< which source is my current thermal dissipation mechanism?
source_thermal_dissipation_instance !< instance of thermal dissipation source mechanism
integer(pInt), dimension(:,:), allocatable, target, public :: &
source_thermal_dissipation_sizePostResult !< size of each post result output
character(len=64), dimension(:,:), allocatable, target, public :: &
source_thermal_dissipation_output !< name of each post result output
integer(pInt), dimension(:), allocatable, target, public :: &
source_thermal_dissipation_Noutput !< number of outputs per instance of this source
real(pReal), dimension(:), allocatable, private :: &
source_thermal_dissipation_coldworkCoeff
public :: &
source_thermal_dissipation_init, &
source_thermal_dissipation_getRateAndItsTangent
contains
!--------------------------------------------------------------------------------------------------
!> @brief module initialization
!> @details reads in material parameters, allocates arrays, and does sanity checks
!--------------------------------------------------------------------------------------------------
subroutine source_thermal_dissipation_init(fileUnit)
use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
use debug, only: &
debug_level,&
debug_constitutive,&
debug_levelBasic
use IO, only: &
IO_read, &
IO_lc, &
IO_getTag, &
IO_isBlank, &
IO_stringPos, &
IO_stringValue, &
IO_floatValue, &
IO_intValue, &
IO_warning, &
IO_error, &
IO_timeStamp, &
IO_EOF
use material, only: &
phase_source, &
phase_Nsources, &
phase_Noutput, &
SOURCE_thermal_dissipation_label, &
SOURCE_thermal_dissipation_ID, &
material_Nphase, &
material_phase, &
sourceState, &
MATERIAL_partPhase
use numerics,only: &
worldrank, &
numerics_integrator
implicit none
integer(pInt), intent(in) :: fileUnit
integer(pInt), parameter :: MAXNCHUNKS = 7_pInt
integer(pInt), dimension(1+2*MAXNCHUNKS) :: positions
integer(pInt) :: maxNinstance,phase,instance,source,sourceOffset
integer(pInt) :: sizeState, sizeDotState
integer(pInt) :: NofMyPhase
character(len=65536) :: &
tag = '', &
line = ''
mainProcess: if (worldrank == 0) then
write(6,'(/,a)') ' <<<+- source_'//SOURCE_thermal_dissipation_label//' init -+>>>'
write(6,'(a)') ' $Id$'
write(6,'(a15,a)') ' Current time: ',IO_timeStamp()
#include "compilation_info.f90"
endif mainProcess
maxNinstance = int(count(phase_source == SOURCE_thermal_dissipation_ID),pInt)
if (maxNinstance == 0_pInt) return
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0_pInt) &
write(6,'(a16,1x,i5,/)') '# instances:',maxNinstance
allocate(source_thermal_dissipation_offset(material_Nphase), source=0_pInt)
allocate(source_thermal_dissipation_instance(material_Nphase), source=0_pInt)
do phase = 1, material_Nphase
source_thermal_dissipation_instance(phase) = count(phase_source(:,1:phase) == SOURCE_thermal_dissipation_ID)
do source = 1, phase_Nsources(phase)
if (phase_source(source,phase) == SOURCE_thermal_dissipation_ID) &
source_thermal_dissipation_offset(phase) = source
enddo
enddo
allocate(source_thermal_dissipation_sizePostResults(maxNinstance), source=0_pInt)
allocate(source_thermal_dissipation_sizePostResult(maxval(phase_Noutput),maxNinstance),source=0_pInt)
allocate(source_thermal_dissipation_output (maxval(phase_Noutput),maxNinstance))
source_thermal_dissipation_output = ''
allocate(source_thermal_dissipation_Noutput(maxNinstance), source=0_pInt)
allocate(source_thermal_dissipation_coldworkCoeff(maxNinstance), source=0.0_pReal)
rewind(fileUnit)
phase = 0_pInt
do while (trim(line) /= IO_EOF .and. IO_lc(IO_getTag(line,'<','>')) /= MATERIAL_partPhase) ! wind forward to <phase>
line = IO_read(fileUnit)
enddo
parsingFile: do while (trim(line) /= IO_EOF) ! read through sections of phase part
line = IO_read(fileUnit)
if (IO_isBlank(line)) cycle ! skip empty lines
if (IO_getTag(line,'<','>') /= '') then ! stop at next part
line = IO_read(fileUnit, .true.) ! reset IO_read
exit
endif
if (IO_getTag(line,'[',']') /= '') then ! next phase section
phase = phase + 1_pInt ! advance phase section counter
cycle ! skip to next line
endif
if (phase > 0_pInt ) then; if (any(phase_source(:,phase) == SOURCE_thermal_dissipation_ID)) then ! do not short-circuit here (.and. with next if statemen). It's not safe in Fortran
instance = source_thermal_dissipation_instance(phase) ! which instance of my source is present phase
positions = IO_stringPos(line,MAXNCHUNKS)
tag = IO_lc(IO_stringValue(line,positions,1_pInt)) ! extract key
select case(tag)
case ('dissipation_coldworkcoeff')
source_thermal_dissipation_coldworkCoeff(instance) = IO_floatValue(line,positions,2_pInt)
end select
endif; endif
enddo parsingFile
initializeInstances: do phase = 1_pInt, material_Nphase
if (any(phase_source(:,phase) == SOURCE_thermal_dissipation_ID)) then
NofMyPhase=count(material_phase==phase)
instance = source_thermal_dissipation_instance(phase)
sourceOffset = source_thermal_dissipation_offset(phase)
sizeDotState = 0_pInt
sizeState = 0_pInt
sourceState(phase)%p(sourceOffset)%sizeState = sizeState
sourceState(phase)%p(sourceOffset)%sizeDotState = sizeDotState
sourceState(phase)%p(sourceOffset)%sizePostResults = source_thermal_dissipation_sizePostResults(instance)
allocate(sourceState(phase)%p(sourceOffset)%aTolState (sizeState), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%state0 (sizeState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%partionedState0 (sizeState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%subState0 (sizeState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%state (sizeState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%state_backup (sizeState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%dotState (sizeDotState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%deltaState (sizeDotState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%dotState_backup (sizeDotState,NofMyPhase), source=0.0_pReal)
if (any(numerics_integrator == 1_pInt)) then
allocate(sourceState(phase)%p(sourceOffset)%previousDotState (sizeDotState,NofMyPhase), source=0.0_pReal)
allocate(sourceState(phase)%p(sourceOffset)%previousDotState2 (sizeDotState,NofMyPhase), source=0.0_pReal)
endif
if (any(numerics_integrator == 4_pInt)) &
allocate(sourceState(phase)%p(sourceOffset)%RK4dotState (sizeDotState,NofMyPhase), source=0.0_pReal)
if (any(numerics_integrator == 5_pInt)) &
allocate(sourceState(phase)%p(sourceOffset)%RKCK45dotState (6,sizeDotState,NofMyPhase),source=0.0_pReal)
endif
enddo initializeInstances
end subroutine source_thermal_dissipation_init
!--------------------------------------------------------------------------------------------------
!> @brief returns local vacancy generation rate
!--------------------------------------------------------------------------------------------------
subroutine source_thermal_dissipation_getRateAndItsTangent(TDot, dTDOT_dT, Tstar_v, Lp, ipc, ip, el)
use math, only: &
math_Mandel6to33
use material, only: &
mappingConstitutive
implicit none
integer(pInt), intent(in) :: &
ipc, & !< grain number
ip, & !< integration point number
el !< element number
real(pReal), intent(in), dimension(6) :: &
Tstar_v !< 2nd Piola Kirchhoff stress tensor (Mandel)
real(pReal), intent(in), dimension(3,3) :: &
Lp
real(pReal), intent(out) :: &
TDot, &
dTDOT_dT
integer(pInt) :: &
instance, phase, constituent
phase = mappingConstitutive(2,ipc,ip,el)
constituent = mappingConstitutive(1,ipc,ip,el)
instance = source_thermal_dissipation_instance(phase)
TDot = source_thermal_dissipation_coldworkCoeff(instance)* &
sum(abs(math_Mandel6to33(Tstar_v)*Lp))
dTDOT_dT = 0.0_pReal
end subroutine source_thermal_dissipation_getRateAndItsTangent
end module source_thermal_dissipation