DAMASK_EICMD/src/mesh_FEM.f90

321 lines
13 KiB
Fortran

!--------------------------------------------------------------------------------------------------
!> @author Pratheek Shanthraj, Max-Planck-Institut für Eisenforschung GmbH
!> @author Martin Diehl, Max-Planck-Institut für Eisenforschung GmbH
!> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH
!> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH
!--------------------------------------------------------------------------------------------------
module mesh
#include <petsc/finclude/petscdmplex.h>
#include <petsc/finclude/petscis.h>
#include <petsc/finclude/petscdmda.h>
use PETScdmplex
use PETScdmda
use PETScis
use DAMASK_interface
use IO
use debug
use discretization
use numerics
use FEsolving
use FEM_Zoo
use prec
use mesh_base
implicit none
private
integer, public, protected :: &
mesh_Nboundaries, &
mesh_NcpElems, & !< total number of CP elements in mesh
mesh_NcpElemsGlobal, &
mesh_Nnodes !< total number of nodes in mesh
!!!! BEGIN DEPRECATED !!!!!
integer, public, protected :: &
mesh_maxNips !< max number of IPs in any CP element
!!!! BEGIN DEPRECATED !!!!!
integer, dimension(:,:), allocatable :: &
mesh_element !DEPRECATED
real(pReal), dimension(:,:), allocatable :: &
mesh_node !< node x,y,z coordinates (after deformation! ONLY FOR MARC!!!)
real(pReal), dimension(:,:), allocatable :: &
mesh_ipVolume, & !< volume associated with IP (initially!)
mesh_node0 !< node x,y,z coordinates (initially!)
real(pReal), dimension(:,:,:), allocatable, public :: &
mesh_ipCoordinates !< IP x,y,z coordinates (after deformation!)
DM, public :: geomMesh
PetscInt, dimension(:), allocatable, public, protected :: &
mesh_boundaries
type, public, extends(tMesh) :: tMesh_FEM
contains
procedure, pass(self) :: tMesh_FEM_init
generic, public :: init => tMesh_FEM_init
end type tMesh_FEM
type(tMesh_FEM), public, protected :: theMesh
public :: &
mesh_init, &
mesh_FEM_build_ipVolumes, &
mesh_FEM_build_ipCoordinates, &
mesh_cellCenterCoordinates
contains
subroutine tMesh_FEM_init(self,dimen,order,nodes)
integer, intent(in) :: dimen
integer, intent(in) :: order
real(pReal), intent(in), dimension(:,:) :: nodes
class(tMesh_FEM) :: self
if (dimen == 2) then
if (order == 1) call self%tMesh%init('mesh',1,nodes)
if (order == 2) call self%tMesh%init('mesh',2,nodes)
elseif(dimen == 3) then
if (order == 1) call self%tMesh%init('mesh',6,nodes)
if (order == 2) call self%tMesh%init('mesh',8,nodes)
endif
end subroutine tMesh_FEM_init
!--------------------------------------------------------------------------------------------------
!> @brief initializes the mesh by calling all necessary private routines the mesh module
!! Order and routines strongly depend on type of solver
!--------------------------------------------------------------------------------------------------
subroutine mesh_init
integer, dimension(1), parameter:: FE_geomtype = [1] !< geometry type of particular element type
integer, dimension(1) :: FE_Nips !< number of IPs in a specific type of element
integer, parameter :: FILEUNIT = 222
integer :: j
integer, allocatable, dimension(:) :: chunkPos
integer :: dimPlex
integer, parameter :: &
mesh_ElemType=1 !< Element type of the mesh (only support homogeneous meshes)
character(len=512) :: &
line
logical :: flag
PetscSF :: sf
DM :: globalMesh
PetscInt :: face, nFaceSets
PetscInt, pointer :: pFaceSets(:)
IS :: faceSetIS
PetscErrorCode :: ierr
write(6,'(/,a)') ' <<<+- mesh init -+>>>'
! read in file
call DMPlexCreateFromFile(PETSC_COMM_WORLD,geometryFile,PETSC_TRUE,globalMesh,ierr)
CHKERRQ(ierr)
! get spatial dimension (2 or 3?)
call DMGetDimension(globalMesh,dimPlex,ierr)
CHKERRQ(ierr)
write(6,*) 'dimension',dimPlex;flush(6)
call DMGetStratumSize(globalMesh,'depth',dimPlex,mesh_NcpElemsGlobal,ierr)
CHKERRQ(ierr)
! get number of IDs in face sets (for boundary conditions?)
call DMGetLabelSize(globalMesh,'Face Sets',mesh_Nboundaries,ierr)
CHKERRQ(ierr)
write(6,*) 'number of "Face Sets"',mesh_Nboundaries;flush(6)
call MPI_Bcast(mesh_Nboundaries,1,MPI_INTEGER,0,PETSC_COMM_WORLD,ierr)
call MPI_Bcast(mesh_NcpElemsGlobal,1,MPI_INTEGER,0,PETSC_COMM_WORLD,ierr)
call MPI_Bcast(dimPlex,1,MPI_INTEGER,0,PETSC_COMM_WORLD,ierr)
allocate(mesh_boundaries(mesh_Nboundaries), source = 0)
call DMGetLabelSize(globalMesh,'Face Sets',nFaceSets,ierr)
CHKERRQ(ierr)
call DMGetLabelIdIS(globalMesh,'Face Sets',faceSetIS,ierr)
CHKERRQ(ierr)
if (nFaceSets > 0) call ISGetIndicesF90(faceSetIS,pFaceSets,ierr)
do face = 1, nFaceSets
mesh_boundaries(face) = pFaceSets(face)
enddo
if (nFaceSets > 0) call ISRestoreIndicesF90(faceSetIS,pFaceSets,ierr)
call MPI_Bcast(mesh_boundaries,mesh_Nboundaries,MPI_INTEGER,0,PETSC_COMM_WORLD,ierr)
! this read in function should ignore C and C++ style comments
! it is used for BC only?
if (worldrank == 0) then
j = 0
flag = .false.
call IO_open_file(FILEUNIT,trim(geometryFile))
do
read(FILEUNIT,'(a512)') line
if (trim(line) == IO_EOF) exit ! skip empty lines
if (trim(line) == '$Elements') then
read(FILEUNIT,'(a512)') line ! number of elements (ignore)
read(FILEUNIT,'(a512)') line
flag = .true.
endif
if (trim(line) == '$EndElements') exit
if (flag) then
chunkPos = IO_stringPos(line)
if (chunkPos(1) == 3+IO_intValue(line,chunkPos,3)+dimPlex+1) then
call DMSetLabelValue(globalMesh,'material',j,IO_intValue(line,chunkPos,4),ierr)
CHKERRQ(ierr)
j = j + 1
endif ! count all identifiers to allocate memory and do sanity check
endif
enddo
close (FILEUNIT)
call DMClone(globalMesh,geomMesh,ierr)
CHKERRQ(ierr)
else
call DMPlexDistribute(globalMesh,0,sf,geomMesh,ierr)
CHKERRQ(ierr)
endif
call DMDestroy(globalMesh,ierr); CHKERRQ(ierr)
call DMGetStratumSize(geomMesh,'depth',dimPlex,mesh_NcpElems,ierr)
CHKERRQ(ierr)
call DMGetStratumSize(geomMesh,'depth',0,mesh_Nnodes,ierr)
CHKERRQ(ierr)
FE_Nips(FE_geomtype(1)) = FEM_Zoo_nQuadrature(dimPlex,integrationOrder)
mesh_maxNips = FE_Nips(1)
write(6,*) 'mesh_maxNips',mesh_maxNips
call mesh_FEM_build_ipCoordinates(dimPlex,FEM_Zoo_QuadraturePoints(dimPlex,integrationOrder)%p)
call mesh_FEM_build_ipVolumes(dimPlex)
allocate (mesh_element (4,mesh_NcpElems)); mesh_element = 0
do j = 1, mesh_NcpElems
mesh_element( 1,j) = -1 ! DEPRECATED
mesh_element( 2,j) = mesh_elemType ! elem type
mesh_element( 3,j) = 1 ! homogenization
call DMGetLabelValue(geomMesh,'material',j-1,mesh_element(4,j),ierr)
CHKERRQ(ierr)
end do
if (debug_e < 1 .or. debug_e > mesh_NcpElems) &
call IO_error(602,ext_msg='element') ! selected element does not exist
if (debug_i < 1 .or. debug_i > FE_Nips(FE_geomtype(mesh_element(2,debug_e)))) &
call IO_error(602,ext_msg='IP') ! selected element does not have requested IP
FEsolving_execElem = [ 1,mesh_NcpElems ] ! parallel loop bounds set to comprise all DAMASK elements
if (allocated(FEsolving_execIP)) deallocate(FEsolving_execIP)
allocate(FEsolving_execIP(2,mesh_NcpElems)); FEsolving_execIP = 1 ! parallel loop bounds set to comprise from first IP...
forall (j = 1:mesh_NcpElems) FEsolving_execIP(2,j) = FE_Nips(FE_geomtype(mesh_element(2,j))) ! ...up to own IP count for each element
allocate(mesh_node0(3,mesh_Nnodes),source=0.0_pReal)
call theMesh%init(dimplex,integrationOrder,mesh_node0)
call theMesh%setNelems(mesh_NcpElems)
theMesh%homogenizationAt = mesh_element(3,:)
theMesh%microstructureAt = mesh_element(4,:)
call discretization_init(mesh_element(3,:),mesh_element(4,:),&
reshape(mesh_ipCoordinates,[3,mesh_maxNips*mesh_NcpElems]), &
mesh_node0)
end subroutine mesh_init
!--------------------------------------------------------------------------------------------------
!> @brief Calculates cell center coordinates.
!--------------------------------------------------------------------------------------------------
pure function mesh_cellCenterCoordinates(ip,el)
integer, intent(in) :: el, & !< element number
ip !< integration point number
real(pReal), dimension(3) :: mesh_cellCenterCoordinates !< x,y,z coordinates of the cell center of the requested IP cell
end function mesh_cellCenterCoordinates
!--------------------------------------------------------------------------------------------------
!> @brief Calculates IP volume. Allocates global array 'mesh_ipVolume'
!> @details The IP volume is calculated differently depending on the cell type.
!> 2D cells assume an element depth of one in order to calculate the volume.
!> For the hexahedral cell we subdivide the cell into subvolumes of pyramidal
!> shape with a cell face as basis and the central ip at the tip. This subvolume is
!> calculated as an average of four tetrahedals with three corners on the cell face
!> and one corner at the central ip.
!--------------------------------------------------------------------------------------------------
subroutine mesh_FEM_build_ipVolumes(dimPlex)
PetscInt :: dimPlex
PetscReal :: vol
PetscReal, target :: cent(dimPlex), norm(dimPlex)
PetscReal, pointer :: pCent(:), pNorm(:)
PetscInt :: cellStart, cellEnd, cell
PetscErrorCode :: ierr
if (.not. allocated(mesh_ipVolume)) then
allocate(mesh_ipVolume(mesh_maxNips,mesh_NcpElems))
mesh_ipVolume = 0.0_pReal
endif
call DMPlexGetHeightStratum(geomMesh,0,cellStart,cellEnd,ierr); CHKERRQ(ierr)
pCent => cent
pNorm => norm
do cell = cellStart, cellEnd-1
call DMPlexComputeCellGeometryFVM(geomMesh,cell,vol,pCent,pNorm,ierr)
CHKERRQ(ierr)
mesh_ipVolume(:,cell+1) = vol/real(mesh_maxNips,pReal)
enddo
end subroutine mesh_FEM_build_ipVolumes
!--------------------------------------------------------------------------------------------------
!> @brief Calculates IP Coordinates. Allocates global array 'mesh_ipCoordinates'
!--------------------------------------------------------------------------------------------------
subroutine mesh_FEM_build_ipCoordinates(dimPlex,qPoints)
PetscInt, intent(in) :: dimPlex
PetscReal, intent(in) :: qPoints(mesh_maxNips*dimPlex)
PetscReal, target :: v0(dimPlex), cellJ(dimPlex*dimPlex), invcellJ(dimPlex*dimPlex)
PetscReal, pointer :: pV0(:), pCellJ(:), pInvcellJ(:)
PetscReal :: detJ
PetscInt :: cellStart, cellEnd, cell, qPt, dirI, dirJ, qOffset
PetscErrorCode :: ierr
allocate(mesh_ipCoordinates(3,mesh_maxNips,mesh_NcpElems),source=0.0_pReal)
pV0 => v0
pCellJ => cellJ
pInvcellJ => invcellJ
call DMPlexGetHeightStratum(geomMesh,0,cellStart,cellEnd,ierr); CHKERRQ(ierr)
do cell = cellStart, cellEnd-1 !< loop over all elements
call DMPlexComputeCellGeometryAffineFEM(geomMesh,cell,pV0,pCellJ,pInvcellJ,detJ,ierr)
CHKERRQ(ierr)
qOffset = 0
do qPt = 1, mesh_maxNips
do dirI = 1, dimPlex
mesh_ipCoordinates(dirI,qPt,cell+1) = pV0(dirI)
do dirJ = 1, dimPlex
mesh_ipCoordinates(dirI,qPt,cell+1) = mesh_ipCoordinates(dirI,qPt,cell+1) + &
pCellJ((dirI-1)*dimPlex+dirJ)*(qPoints(qOffset+dirJ) + 1.0)
enddo
enddo
qOffset = qOffset + dimPlex
enddo
enddo
end subroutine mesh_FEM_build_ipCoordinates
end module mesh