DAMASK_EICMD/src/plastic_nonlocal.f90

2426 lines
128 KiB
Fortran
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

!--------------------------------------------------------------------------------------------------
!> @author Christoph Kords, Max-Planck-Institut für Eisenforschung GmbH
!> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH
!> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH
!> @brief material subroutine for plasticity including dislocation flux
!--------------------------------------------------------------------------------------------------
module plastic_nonlocal
use prec, only: &
pReal
implicit none
private
real(pReal), parameter, private :: &
KB = 1.38e-23_pReal !< Physical parameter, Boltzmann constant in J/Kelvin
integer, dimension(:,:), allocatable, target, public :: &
plastic_nonlocal_sizePostResult !< size of each post result output
character(len=64), dimension(:,:), allocatable, target, public :: &
plastic_nonlocal_output !< name of each post result output
! storage order of dislocation types
integer, dimension(8), parameter :: &
sgl = [1,2,3,4,5,6,7,8] !< signed (single)
integer, dimension(5), parameter :: &
edg = [1,2,5,6,9], & !< edge
scr = [3,4,7,8,10] !< screw
integer, dimension(4), parameter :: &
mob = [1,2,3,4], & !< mobile
imm = [5,6,7,8] !< immobile (blocked)
integer, dimension(2), parameter :: &
dip = [9,10], & !< dipole
imm_edg = imm(1:2), & !< immobile edge
imm_scr = imm(3:4) !< immobile screw
integer, parameter :: &
mob_edg_pos = 1, & !< mobile edge positive
mob_edg_neg = 2, & !< mobile edge negative
mob_scr_pos = 3, & !< mobile screw positive
mob_scr_neg = 4 !< mobile screw positive
! BEGIN DEPRECATES
integer, dimension(:,:,:), allocatable, private :: &
iRhoU, & !< state indices for unblocked density
iRhoB, & !< state indices for blocked density
iRhoD, & !< state indices for dipole density
iV, & !< state indices for dislcation velocities
iD !< state indices for stable dipole height
integer, dimension(:), allocatable, private, protected :: &
totalNslip !< total number of active slip systems for each instance
!END DEPRECATED
real(pReal), dimension(:,:,:,:,:,:), allocatable, private :: &
compatibility !< slip system compatibility between me and my neighbors
enum, bind(c)
enumerator :: &
undefined_ID, &
rho_sgl_mob_edg_pos_ID, &
rho_sgl_mob_edg_neg_ID, &
rho_sgl_mob_scr_pos_ID, &
rho_sgl_mob_scr_neg_ID, &
rho_sgl_imm_edg_pos_ID, &
rho_sgl_imm_edg_neg_ID, &
rho_sgl_imm_scr_pos_ID, &
rho_sgl_imm_scr_neg_ID, &
rho_dip_edg_ID, &
rho_dip_scr_ID, &
rho_forest_ID, &
shearrate_ID, &
resolvedstress_back_ID, &
resistance_ID, &
rho_dot_sgl_ID, &
rho_dot_sgl_mobile_ID, &
rho_dot_dip_ID, &
rho_dot_gen_edge_ID, &
rho_dot_gen_screw_ID, &
rho_dot_sgl2dip_edge_ID, &
rho_dot_sgl2dip_screw_ID, &
rho_dot_ann_ath_ID, &
rho_dot_ann_the_edge_ID, &
rho_dot_ann_the_screw_ID, &
rho_dot_edgejogs_ID, &
rho_dot_flux_mobile_ID, &
rho_dot_flux_edge_ID, &
rho_dot_flux_screw_ID, &
velocity_edge_pos_ID, &
velocity_edge_neg_ID, &
velocity_screw_pos_ID, &
velocity_screw_neg_ID, &
accumulatedshear_ID
end enum
type, private :: tParameters !< container type for internal constitutive parameters
real(pReal) :: &
atomicVolume, & !< atomic volume
Dsd0, & !< prefactor for self-diffusion coefficient
selfDiffusionEnergy, & !< activation enthalpy for diffusion
aTolRho, & !< absolute tolerance for dislocation density in state integration
aTolShear, & !< absolute tolerance for accumulated shear in state integration
significantRho, & !< density considered significant
significantN, & !< number of dislocations considered significant
doublekinkwidth, & !< width of a doubkle kink in multiples of the burgers vector length b
solidSolutionEnergy, & !< activation energy for solid solution in J
solidSolutionSize, & !< solid solution obstacle size in multiples of the burgers vector length
solidSolutionConcentration, & !< concentration of solid solution in atomic parts
p, & !< parameter for kinetic law (Kocks,Argon,Ashby)
q, & !< parameter for kinetic law (Kocks,Argon,Ashby)
viscosity, & !< viscosity for dislocation glide in Pa s
fattack, & !< attack frequency in Hz
rhoSglScatter, & !< standard deviation of scatter in initial dislocation density
surfaceTransmissivity, & !< transmissivity at free surface
grainboundaryTransmissivity, & !< transmissivity at grain boundary (identified by different texture)
CFLfactor, & !< safety factor for CFL flux condition
fEdgeMultiplication, & !< factor that determines how much edge dislocations contribute to multiplication (0...1)
rhoSglRandom, &
rhoSglRandomBinning, &
linetensionEffect, &
edgeJogFactor, &
mu, &
nu
real(pReal), dimension(:), allocatable :: &
minDipoleHeight_edge, & !< minimum stable edge dipole height
minDipoleHeight_screw, & !< minimum stable screw dipole height
peierlsstress_edge, &
peierlsstress_screw, &
rhoSglEdgePos0, & !< initial edge_pos dislocation density
rhoSglEdgeNeg0, & !< initial edge_neg dislocation density
rhoSglScrewPos0, & !< initial screw_pos dislocation density
rhoSglScrewNeg0, & !< initial screw_neg dislocation density
rhoDipEdge0, & !< initial edge dipole dislocation density
rhoDipScrew0,& !< initial screw dipole dislocation density
lambda0, & !< mean free path prefactor for each
burgers !< absolute length of burgers vector [m]
real(pReal), dimension(:,:), allocatable :: &
slip_normal, &
slip_direction, &
slip_transverse, &
minDipoleHeight, & ! edge and screw
peierlsstress, & ! edge and screw
interactionSlipSlip ,& !< coefficients for slip-slip interaction
forestProjection_Edge, & !< matrix of forest projections of edge dislocations
forestProjection_Screw !< matrix of forest projections of screw dislocations
real(pReal), dimension(:), allocatable, private :: &
nonSchmidCoeff
real(pReal), dimension(:,:,:), allocatable, private :: &
Schmid, & !< Schmid contribution
nonSchmid_pos, &
nonSchmid_neg !< combined projection of Schmid and non-Schmid contributions to the resolved shear stress (only for screws)
integer :: &
totalNslip
integer, dimension(:) ,allocatable , public:: &
Nslip,&
colinearSystem !< colinear system to the active slip system (only valid for fcc!)
logical, private :: &
shortRangeStressCorrection, & !< flag indicating the use of the short range stress correction by a excess density gradient term
probabilisticMultiplication
integer(kind(undefined_ID)), dimension(:), allocatable :: &
outputID !< ID of each post result output
end type tParameters
type, private :: tNonlocalMicrostructure
real(pReal), allocatable, dimension(:,:) :: &
tau_Threshold, &
tau_Back
end type tNonlocalMicrostructure
type, private :: tOutput !< container type for storage of output results
real(pReal), dimension(:,:), allocatable, private :: &
rhoDotEdgeJogs
real(pReal), dimension(:,:,:), allocatable, private :: &
rhoDotFlux, &
rhoDotMultiplication, &
rhoDotSingle2DipoleGlide, &
rhoDotAthermalAnnihilation, &
rhoDotThermalAnnihilation
end type tOutput
type, private :: tNonlocalState
real(pReal), pointer, dimension(:,:) :: &
rho, & ! < all dislocations
rhoSgl, &
rhoSglMobile, & ! iRhoU
rho_sgl_mob_edg_pos, &
rho_sgl_mob_edg_neg, &
rho_sgl_mob_scr_pos, &
rho_sgl_mob_scr_neg, &
rhoSglImmobile, & ! iRhoB
rho_sgl_imm_edg_pos, &
rho_sgl_imm_edg_neg, &
rho_sgl_imm_scr_pos, &
rho_sgl_imm_scr_neg, &
rhoDip, & ! iRhoD
rho_dip_edg, &
rho_dip_scr, &
rho_forest, &
accumulatedshear, &
v
end type tNonlocalState
type(tNonlocalState), allocatable, dimension(:), private :: &
deltaState, &
dotState, &
state
type(tParameters), dimension(:), allocatable, private :: param !< containers of constitutive parameters (len Ninstance)
type(tOutput), dimension(:), allocatable, private :: results
type(tNonlocalMicrostructure), dimension(:), allocatable, private :: microstructure
integer(kind(undefined_ID)), dimension(:,:), allocatable, private :: &
plastic_nonlocal_outputID !< ID of each post result output
public :: &
plastic_nonlocal_init, &
plastic_nonlocal_dependentState, &
plastic_nonlocal_LpAndItsTangent, &
plastic_nonlocal_dotState, &
plastic_nonlocal_deltaState, &
plastic_nonlocal_updateCompatibility, &
plastic_nonlocal_postResults, &
plastic_nonlocal_results
private :: &
plastic_nonlocal_kinetics
contains
!--------------------------------------------------------------------------------------------------
!> @brief module initialization
!> @details reads in material parameters, allocates arrays, and does sanity checks
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_init
use prec, only: &
dEq0, dNeq0, dEq
use math, only: &
math_expand, math_cross
use IO, only: &
IO_error
use debug, only: &
debug_level, &
debug_constitutive, &
debug_levelBasic
use mesh, only: &
theMesh
use material, only: &
phase_plasticity, &
phase_plasticityInstance, &
phase_Noutput, &
PLASTICITY_NONLOCAL_label, &
PLASTICITY_NONLOCAL_ID, &
plasticState, &
material_phase, &
material_allocatePlasticState
use config
use lattice
implicit none
character(len=65536), dimension(0), parameter :: emptyStringArray = [character(len=65536)::]
integer, dimension(0), parameter :: emptyIntArray = [integer::]
real(pReal), dimension(0), parameter :: emptyRealArray = [real(pReal)::]
integer :: &
sizeState, sizeDotState,sizeDependentState, sizeDeltaState, &
maxNinstances, &
p, i, &
l, &
s1, s2, &
s, &
t, &
c
integer(kind(undefined_ID)) :: &
outputID
character(len=512) :: &
extmsg = '', &
structure
character(len=65536), dimension(:), allocatable :: outputs
integer :: NofMyPhase
write(6,'(/,a)') ' <<<+- constitutive_'//PLASTICITY_NONLOCAL_label//' init -+>>>'
write(6,'(/,a)') ' Reuber et al., Acta Materialia 71:333348, 2014'
write(6,'(a)') ' https://doi.org/10.1016/j.actamat.2014.03.012'
write(6,'(/,a)') ' Kords, Dissertation RWTH Aachen, 2014'
write(6,'(a)') ' http://publications.rwth-aachen.de/record/229993'
maxNinstances = count(phase_plasticity == PLASTICITY_NONLOCAL_ID)
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0) &
write(6,'(a16,1x,i5,/)') '# instances:',maxNinstances
allocate(param(maxNinstances))
allocate(state(maxNinstances))
allocate(dotState(maxNinstances))
allocate(deltaState(maxNinstances))
allocate(microstructure(maxNinstances))
allocate(results(maxNinstances))
allocate(plastic_nonlocal_sizePostResult(maxval(phase_Noutput), maxNinstances), source=0)
allocate(plastic_nonlocal_output(maxval(phase_Noutput), maxNinstances))
plastic_nonlocal_output = ''
allocate(plastic_nonlocal_outputID(maxval(phase_Noutput), maxNinstances), source=undefined_ID)
allocate(totalNslip(maxNinstances), source=0)
do p=1, size(config_phase)
if (phase_plasticity(p) /= PLASTICITY_NONLOCAL_ID) cycle
associate(prm => param(phase_plasticityInstance(p)), &
dot => dotState(phase_plasticityInstance(p)), &
stt => state(phase_plasticityInstance(p)), &
del => deltaState(phase_plasticityInstance(p)), &
res => results(phase_plasticityInstance(p)), &
dst => microstructure(phase_plasticityInstance(p)), &
config => config_phase(p))
prm%aTolRho = config%getFloat('atol_rho', defaultVal=0.0_pReal)
prm%aTolShear = config%getFloat('atol_shear', defaultVal=0.0_pReal)
structure = config%getString('lattice_structure')
! This data is read in already in lattice
prm%mu = lattice_mu(p)
prm%nu = lattice_nu(p)
prm%Nslip = config%getInts('nslip',defaultVal=emptyIntArray)
prm%totalNslip = sum(prm%Nslip)
slipActive: if (prm%totalNslip > 0) then
prm%Schmid = lattice_SchmidMatrix_slip(prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
if(trim(config%getString('lattice_structure')) == 'bcc') then
prm%nonSchmidCoeff = config%getFloats('nonschmid_coefficients',&
defaultVal = emptyRealArray)
prm%nonSchmid_pos = lattice_nonSchmidMatrix(prm%Nslip,prm%nonSchmidCoeff,+1)
prm%nonSchmid_neg = lattice_nonSchmidMatrix(prm%Nslip,prm%nonSchmidCoeff,-1)
else
prm%nonSchmid_pos = prm%Schmid
prm%nonSchmid_neg = prm%Schmid
endif
prm%interactionSlipSlip = lattice_interaction_SlipBySlip(prm%Nslip, &
config%getFloats('interaction_slipslip'), &
config%getString('lattice_structure'))
prm%forestProjection_edge = lattice_forestProjection_edge (prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
prm%forestProjection_screw = lattice_forestProjection_screw(prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
prm%slip_direction = lattice_slip_direction (prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
prm%slip_transverse = lattice_slip_transverse(prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
prm%slip_normal = lattice_slip_normal (prm%Nslip,config%getString('lattice_structure'),&
config%getFloat('c/a',defaultVal=0.0_pReal))
! collinear systems (only for octahedral slip systems in fcc)
allocate(prm%colinearSystem(prm%totalNslip), source = -1)
do s1 = 1, prm%totalNslip
do s2 = 1, prm%totalNslip
if (all(dEq0 (math_cross(prm%slip_direction(1:3,s1),prm%slip_direction(1:3,s2)))) .and. &
any(dNeq0(math_cross(prm%slip_normal (1:3,s1),prm%slip_normal (1:3,s2))))) &
prm%colinearSystem(s1) = s2
enddo
enddo
prm%rhoSglEdgePos0 = config%getFloats('rhosgledgepos0', requiredSize=size(prm%Nslip))
prm%rhoSglEdgeNeg0 = config%getFloats('rhosgledgeneg0', requiredSize=size(prm%Nslip))
prm%rhoSglScrewPos0 = config%getFloats('rhosglscrewpos0', requiredSize=size(prm%Nslip))
prm%rhoSglScrewNeg0 = config%getFloats('rhosglscrewneg0', requiredSize=size(prm%Nslip))
prm%rhoDipEdge0 = config%getFloats('rhodipedge0', requiredSize=size(prm%Nslip))
prm%rhoDipScrew0 = config%getFloats('rhodipscrew0', requiredSize=size(prm%Nslip))
prm%lambda0 = config%getFloats('lambda0', requiredSize=size(prm%Nslip))
prm%burgers = config%getFloats('burgers', requiredSize=size(prm%Nslip))
prm%lambda0 = math_expand(prm%lambda0,prm%Nslip)
prm%burgers = math_expand(prm%burgers,prm%Nslip)
prm%minDipoleHeight_edge = config%getFloats('minimumdipoleheightedge', requiredSize=size(prm%Nslip))
prm%minDipoleHeight_screw = config%getFloats('minimumdipoleheightscrew', requiredSize=size(prm%Nslip))
prm%minDipoleHeight_edge = math_expand(prm%minDipoleHeight_edge,prm%Nslip)
prm%minDipoleHeight_screw = math_expand(prm%minDipoleHeight_screw,prm%Nslip)
allocate(prm%minDipoleHeight(prm%totalNslip,2))
prm%minDipoleHeight(:,1) = prm%minDipoleHeight_edge
prm%minDipoleHeight(:,2) = prm%minDipoleHeight_screw
prm%peierlsstress_edge = config%getFloats('peierlsstressedge', requiredSize=size(prm%Nslip))
prm%peierlsstress_screw = config%getFloats('peierlsstressscrew', requiredSize=size(prm%Nslip))
prm%peierlsstress_edge = math_expand(prm%peierlsstress_edge,prm%Nslip)
prm%peierlsstress_screw = math_expand(prm%peierlsstress_screw,prm%Nslip)
allocate(prm%peierlsstress(prm%totalNslip,2))
prm%peierlsstress(:,1) = prm%peierlsstress_edge
prm%peierlsstress(:,2) = prm%peierlsstress_screw
prm%significantRho = config%getFloat('significantrho')
prm%significantN = config%getFloat('significantn', 0.0_pReal)
prm%CFLfactor = config%getFloat('cflfactor',defaultVal=2.0_pReal)
prm%atomicVolume = config%getFloat('atomicvolume')
prm%Dsd0 = config%getFloat('selfdiffusionprefactor') !,'dsd0'
prm%selfDiffusionEnergy = config%getFloat('selfdiffusionenergy') !,'qsd'
prm%linetensionEffect = config%getFloat('linetension')
prm%edgeJogFactor = config%getFloat('edgejog')!,'edgejogs'
prm%doublekinkwidth = config%getFloat('doublekinkwidth')
prm%solidSolutionEnergy = config%getFloat('solidsolutionenergy')
prm%solidSolutionSize = config%getFloat('solidsolutionsize')
prm%solidSolutionConcentration = config%getFloat('solidsolutionconcentration')
prm%p = config%getFloat('p')
prm%q = config%getFloat('q')
prm%viscosity = config%getFloat('viscosity')
prm%fattack = config%getFloat('attackfrequency')
! ToDo: discuss logic
prm%rhoSglScatter = config%getFloat('rhosglscatter')
prm%rhoSglRandom = config%getFloat('rhosglrandom',0.0_pReal)
if (config%keyExists('/rhosglrandom/')) &
prm%rhoSglRandomBinning = config%getFloat('rhosglrandombinning',0.0_pReal) !ToDo: useful default?
! if (rhoSglRandom(instance) < 0.0_pReal) &
! if (rhoSglRandomBinning(instance) <= 0.0_pReal) &
prm%surfaceTransmissivity = config%getFloat('surfacetransmissivity',defaultVal=1.0_pReal)
prm%grainboundaryTransmissivity = config%getFloat('grainboundarytransmissivity',defaultVal=-1.0_pReal)
prm%fEdgeMultiplication = config%getFloat('edgemultiplication')
prm%shortRangeStressCorrection = config%keyExists('/shortrangestresscorrection/')
!--------------------------------------------------------------------------------------------------
! sanity checks
if (any(prm%burgers < 0.0_pReal)) extmsg = trim(extmsg)//' burgers'
if (any(prm%lambda0 <= 0.0_pReal)) extmsg = trim(extmsg)//' lambda0'
if (any(prm%rhoSglEdgePos0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoSglEdgePos0'
if (any(prm%rhoSglEdgeNeg0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoSglEdgeNeg0'
if (any(prm%rhoSglScrewPos0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoSglScrewPos0'
if (any(prm%rhoSglScrewNeg0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoSglScrewNeg0'
if (any(prm%rhoDipEdge0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoDipEdge0'
if (any(prm%rhoDipScrew0 < 0.0_pReal)) extmsg = trim(extmsg)//' rhoDipScrew0'
if (any(prm%peierlsstress < 0.0_pReal)) extmsg = trim(extmsg)//' peierlsstress'
if (any(prm%minDipoleHeight < 0.0_pReal)) extmsg = trim(extmsg)//' minDipoleHeight'
if (prm%viscosity <= 0.0_pReal) extmsg = trim(extmsg)//' viscosity'
if (prm%selfDiffusionEnergy <= 0.0_pReal) extmsg = trim(extmsg)//' selfDiffusionEnergy'
if (prm%fattack <= 0.0_pReal) extmsg = trim(extmsg)//' fattack'
if (prm%doublekinkwidth <= 0.0_pReal) extmsg = trim(extmsg)//' doublekinkwidth'
if (prm%Dsd0 < 0.0_pReal) extmsg = trim(extmsg)//' Dsd0'
if (prm%atomicVolume <= 0.0_pReal) extmsg = trim(extmsg)//' atomicVolume' ! ToDo: in disloUCLA/dislotwin, the atomic volume is given as a factor
if (prm%significantN < 0.0_pReal) extmsg = trim(extmsg)//' significantN'
if (prm%significantrho < 0.0_pReal) extmsg = trim(extmsg)//' significantrho'
if (prm%atolshear <= 0.0_pReal) extmsg = trim(extmsg)//' atolshear'
if (prm%atolrho <= 0.0_pReal) extmsg = trim(extmsg)//' atolrho'
if (prm%CFLfactor < 0.0_pReal) extmsg = trim(extmsg)//' CFLfactor'
if (prm%p <= 0.0_pReal .or. prm%p > 1.0_pReal) extmsg = trim(extmsg)//' p'
if (prm%q < 1.0_pReal .or. prm%q > 2.0_pReal) extmsg = trim(extmsg)//' q'
if (prm%linetensionEffect < 0.0_pReal .or. prm%linetensionEffect > 1.0_pReal) &
extmsg = trim(extmsg)//' linetensionEffect'
if (prm%edgeJogFactor < 0.0_pReal .or. prm%edgeJogFactor > 1.0_pReal) &
extmsg = trim(extmsg)//' edgeJogFactor'
if (prm%solidSolutionEnergy <= 0.0_pReal) extmsg = trim(extmsg)//' solidSolutionEnergy'
if (prm%solidSolutionSize <= 0.0_pReal) extmsg = trim(extmsg)//' solidSolutionSize'
if (prm%solidSolutionConcentration <= 0.0_pReal) extmsg = trim(extmsg)//' solidSolutionConcentration'
if (prm%grainboundaryTransmissivity > 1.0_pReal) extmsg = trim(extmsg)//' grainboundaryTransmissivity'
if (prm%surfaceTransmissivity < 0.0_pReal .or. prm%surfaceTransmissivity > 1.0_pReal) &
extmsg = trim(extmsg)//' surfaceTransmissivity'
if (prm%fEdgeMultiplication < 0.0_pReal .or. prm%fEdgeMultiplication > 1.0_pReal) &
extmsg = trim(extmsg)//' fEdgeMultiplication'
endif slipActive
outputs = config%getStrings('(output)',defaultVal=emptyStringArray)
allocate(prm%outputID(0))
do i=1, size(outputs)
outputID = undefined_ID
select case(trim(outputs(i)))
case ('rho_sgl_edge_pos_mobile')
outputID = merge(rho_sgl_mob_edg_pos_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_edge_neg_mobile')
outputID = merge(rho_sgl_mob_edg_neg_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_screw_pos_mobile')
outputID = merge(rho_sgl_mob_scr_pos_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_screw_neg_mobile')
outputID = merge(rho_sgl_mob_scr_neg_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_edge_pos_immobile')
outputID = merge(rho_sgl_imm_edg_pos_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_edge_neg_immobile')
outputID = merge(rho_sgl_imm_edg_neg_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_screw_pos_immobile')
outputID = merge(rho_sgl_imm_scr_pos_ID,undefined_ID,prm%totalNslip>0)
case ('rho_sgl_screw_neg_immobile')
outputID = merge(rho_sgl_imm_scr_neg_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dip_edge')
outputID = merge(rho_dip_edg_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dip_screw')
outputID = merge(rho_dip_scr_ID,undefined_ID,prm%totalNslip>0)
case ('rho_forest')
outputID = merge(rho_forest_ID,undefined_ID,prm%totalNslip>0)
case ('shearrate')
outputID = merge(shearrate_ID,undefined_ID,prm%totalNslip>0)
case ('resolvedstress_back')
outputID = merge(resolvedstress_back_ID,undefined_ID,prm%totalNslip>0)
case ('resistance')
outputID = merge(resistance_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_sgl')
outputID = merge(rho_dot_sgl_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_sgl_mobile')
outputID = merge(rho_dot_sgl_mobile_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_dip')
outputID = merge(rho_dot_dip_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_gen_edge')
outputID = merge(rho_dot_gen_edge_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_gen_screw')
outputID = merge(rho_dot_gen_screw_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_sgl2dip_edge')
outputID = merge(rho_dot_sgl2dip_edge_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_sgl2dip_screw')
outputID = merge(rho_dot_sgl2dip_screw_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_ann_ath')
outputID = merge(rho_dot_ann_ath_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_ann_the_edge')
outputID = merge(rho_dot_ann_the_edge_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_ann_the_screw')
outputID = merge(rho_dot_ann_the_screw_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_edgejogs')
outputID = merge(rho_dot_edgejogs_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_flux_mobile')
outputID = merge(rho_dot_flux_mobile_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_flux_edge')
outputID = merge(rho_dot_flux_edge_ID,undefined_ID,prm%totalNslip>0)
case ('rho_dot_flux_screw')
outputID = merge(rho_dot_flux_screw_ID,undefined_ID,prm%totalNslip>0)
case ('velocity_edge_pos')
outputID = merge(velocity_edge_pos_ID,undefined_ID,prm%totalNslip>0)
case ('velocity_edge_neg')
outputID = merge(velocity_edge_neg_ID,undefined_ID,prm%totalNslip>0)
case ('velocity_screw_pos')
outputID = merge(velocity_screw_pos_ID,undefined_ID,prm%totalNslip>0)
case ('velocity_screw_neg')
outputID = merge(velocity_screw_neg_ID,undefined_ID,prm%totalNslip>0)
case ('accumulatedshear','accumulated_shear')
outputID = merge(accumulatedshear_ID,undefined_ID,prm%totalNslip>0)
end select
if (outputID /= undefined_ID) then
plastic_nonlocal_output(i,phase_plasticityInstance(p)) = outputs(i)
plastic_nonlocal_sizePostResult(i,phase_plasticityInstance(p)) = prm%totalNslip
prm%outputID = [prm%outputID , outputID]
endif
enddo
!--------------------------------------------------------------------------------------------------
! allocate state arrays
NofMyPhase=count(material_phase==p)
sizeDotState = size([ 'rhoSglEdgePosMobile ','rhoSglEdgeNegMobile ', &
'rhoSglScrewPosMobile ','rhoSglScrewNegMobile ', &
'rhoSglEdgePosImmobile ','rhoSglEdgeNegImmobile ', &
'rhoSglScrewPosImmobile','rhoSglScrewNegImmobile', &
'rhoDipEdge ','rhoDipScrew ', &
'accumulatedshear ' ]) * prm%totalNslip !< "basic" microstructural state variables that are independent from other state variables
sizeDependentState = size([ 'rhoForest ']) * prm%totalNslip !< microstructural state variables that depend on other state variables
sizeState = sizeDotState + sizeDependentState &
+ size([ 'velocityEdgePos ','velocityEdgeNeg ', &
'velocityScrewPos ','velocityScrewNeg ', &
'maxDipoleHeightEdge ','maxDipoleHeightScrew' ]) * prm%totalNslip !< other dependent state variables that are not updated by microstructure
sizeDeltaState = sizeDotState
call material_allocatePlasticState(p,NofMyPhase,sizeState,sizeDotState,sizeDeltaState, &
prm%totalNslip,0,0)
plasticState(p)%nonlocal = .true.
plasticState(p)%offsetDeltaState = 0 ! ToDo: state structure does not follow convention
plasticState(p)%sizePostResults = sum(plastic_nonlocal_sizePostResult(:,phase_plasticityInstance(p)))
totalNslip(phase_plasticityInstance(p)) = prm%totalNslip
stt%rho => plasticState(p)%state (0*prm%totalNslip+1:10*prm%totalNslip,:)
dot%rho => plasticState(p)%dotState (0*prm%totalNslip+1:10*prm%totalNslip,:)
del%rho => plasticState(p)%deltaState (0*prm%totalNslip+1:10*prm%totalNslip,:)
plasticState(p)%aTolState(1:10*prm%totalNslip) = prm%aTolRho
stt%rhoSgl => plasticState(p)%state (0*prm%totalNslip+1: 8*prm%totalNslip,:)
dot%rhoSgl => plasticState(p)%dotState (0*prm%totalNslip+1: 8*prm%totalNslip,:)
del%rhoSgl => plasticState(p)%deltaState (0*prm%totalNslip+1: 8*prm%totalNslip,:)
stt%rhoSglMobile => plasticState(p)%state (0*prm%totalNslip+1: 4*prm%totalNslip,:)
dot%rhoSglMobile => plasticState(p)%dotState (0*prm%totalNslip+1: 4*prm%totalNslip,:)
del%rhoSglMobile => plasticState(p)%deltaState (0*prm%totalNslip+1: 4*prm%totalNslip,:)
stt%rho_sgl_mob_edg_pos => plasticState(p)%state (0*prm%totalNslip+1: 1*prm%totalNslip,:)
dot%rho_sgl_mob_edg_pos => plasticState(p)%dotState (0*prm%totalNslip+1: 1*prm%totalNslip,:)
del%rho_sgl_mob_edg_pos => plasticState(p)%deltaState (0*prm%totalNslip+1: 1*prm%totalNslip,:)
stt%rho_sgl_mob_edg_neg => plasticState(p)%state (1*prm%totalNslip+1: 2*prm%totalNslip,:)
dot%rho_sgl_mob_edg_neg => plasticState(p)%dotState (1*prm%totalNslip+1: 2*prm%totalNslip,:)
del%rho_sgl_mob_edg_neg => plasticState(p)%deltaState (1*prm%totalNslip+1: 2*prm%totalNslip,:)
stt%rho_sgl_mob_scr_pos => plasticState(p)%state (2*prm%totalNslip+1: 3*prm%totalNslip,:)
dot%rho_sgl_mob_scr_pos => plasticState(p)%dotState (2*prm%totalNslip+1: 3*prm%totalNslip,:)
del%rho_sgl_mob_scr_pos => plasticState(p)%deltaState (2*prm%totalNslip+1: 3*prm%totalNslip,:)
stt%rho_sgl_mob_scr_neg => plasticState(p)%state (3*prm%totalNslip+1: 4*prm%totalNslip,:)
dot%rho_sgl_mob_scr_neg => plasticState(p)%dotState (3*prm%totalNslip+1: 4*prm%totalNslip,:)
del%rho_sgl_mob_scr_neg => plasticState(p)%deltaState (3*prm%totalNslip+1: 4*prm%totalNslip,:)
stt%rhoSglImmobile => plasticState(p)%state (4*prm%totalNslip+1: 8*prm%totalNslip,:)
dot%rhoSglImmobile => plasticState(p)%dotState (4*prm%totalNslip+1: 8*prm%totalNslip,:)
del%rhoSglImmobile => plasticState(p)%deltaState (4*prm%totalNslip+1: 8*prm%totalNslip,:)
stt%rho_sgl_imm_edg_pos => plasticState(p)%state (4*prm%totalNslip+1: 5*prm%totalNslip,:)
dot%rho_sgl_imm_edg_pos => plasticState(p)%dotState (4*prm%totalNslip+1: 5*prm%totalNslip,:)
del%rho_sgl_imm_edg_pos => plasticState(p)%deltaState (4*prm%totalNslip+1: 5*prm%totalNslip,:)
stt%rho_sgl_imm_edg_neg => plasticState(p)%state (5*prm%totalNslip+1: 6*prm%totalNslip,:)
dot%rho_sgl_imm_edg_neg => plasticState(p)%dotState (5*prm%totalNslip+1: 6*prm%totalNslip,:)
del%rho_sgl_imm_edg_neg => plasticState(p)%deltaState (5*prm%totalNslip+1: 6*prm%totalNslip,:)
stt%rho_sgl_imm_scr_pos => plasticState(p)%state (6*prm%totalNslip+1: 7*prm%totalNslip,:)
dot%rho_sgl_imm_scr_pos => plasticState(p)%dotState(6*prm%totalNslip+1: 7*prm%totalNslip,:)
del%rho_sgl_imm_scr_pos => plasticState(p)%deltaState(6*prm%totalNslip+1: 7*prm%totalNslip,:)
stt%rho_sgl_imm_scr_neg => plasticState(p)%state (7*prm%totalNslip+1: 8*prm%totalNslip,:)
dot%rho_sgl_imm_scr_neg => plasticState(p)%dotState(7*prm%totalNslip+1: 8*prm%totalNslip,:)
del%rho_sgl_imm_scr_neg => plasticState(p)%deltaState(7*prm%totalNslip+1: 8*prm%totalNslip,:)
stt%rhoDip => plasticState(p)%state (8*prm%totalNslip+1:10*prm%totalNslip,:)
dot%rhoDip => plasticState(p)%dotState (8*prm%totalNslip+1:10*prm%totalNslip,:)
del%rhoDip => plasticState(p)%deltaState (8*prm%totalNslip+1:10*prm%totalNslip,:)
stt%rho_dip_edg => plasticState(p)%state (8*prm%totalNslip+1: 9*prm%totalNslip,:)
dot%rho_dip_edg => plasticState(p)%dotState (8*prm%totalNslip+1: 9*prm%totalNslip,:)
del%rho_dip_edg => plasticState(p)%deltaState (8*prm%totalNslip+1: 9*prm%totalNslip,:)
stt%rho_dip_scr => plasticState(p)%state (9*prm%totalNslip+1:10*prm%totalNslip,:)
dot%rho_dip_scr => plasticState(p)%dotState (9*prm%totalNslip+1:10*prm%totalNslip,:)
del%rho_dip_scr => plasticState(p)%deltaState (9*prm%totalNslip+1:10*prm%totalNslip,:)
stt%accumulatedshear => plasticState(p)%state (10*prm%totalNslip + 1:11*prm%totalNslip ,1:NofMyPhase)
dot%accumulatedshear => plasticState(p)%dotState (10*prm%totalNslip + 1:11*prm%totalNslip ,1:NofMyPhase)
del%accumulatedshear => plasticState(p)%deltaState (10*prm%totalNslip + 1:11*prm%totalNslip ,1:NofMyPhase)
plasticState(p)%aTolState(10*prm%totalNslip + 1:11*prm%totalNslip ) = prm%aTolShear
plasticState(p)%slipRate => plasticState(p)%dotState(10*prm%totalNslip + 1:11*prm%totalNslip ,1:NofMyPhase)
plasticState(p)%accumulatedSlip => plasticState(p)%state (10*prm%totalNslip + 1:11*prm%totalNslip ,1:NofMyPhase)
stt%rho_forest => plasticState(p)%state (11*prm%totalNslip + 1:12*prm%totalNslip ,1:NofMyPhase)
stt%v => plasticState(p)%state (12*prm%totalNslip + 1:16*prm%totalNslip ,1:NofMyPhase)
allocate(dst%tau_Threshold(prm%totalNslip,NofMyPhase),source=0.0_pReal)
allocate(dst%tau_Back(prm%totalNslip,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotFlux(prm%totalNslip,8,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotMultiplication(prm%totalNslip,2,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotSingle2DipoleGlide(prm%totalNslip,2,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotAthermalAnnihilation(prm%totalNslip,2,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotThermalAnnihilation(prm%totalNslip,2,NofMyPhase),source=0.0_pReal)
allocate(res%rhoDotEdgeJogs(prm%totalNslip,NofMyPhase),source=0.0_pReal)
end associate
if (NofMyPhase > 0) call stateInit(p,NofMyPhase)
plasticState(p)%state0 = plasticState(p)%state
enddo
allocate(compatibility(2,maxval(totalNslip),maxval(totalNslip),theMesh%elem%nIPneighbors,theMesh%elem%nIPs,theMesh%nElems), &
source=0.0_pReal)
! BEGIN DEPRECATED----------------------------------------------------------------------------------
allocate(iRhoU(maxval(totalNslip),4,maxNinstances), source=0)
allocate(iRhoB(maxval(totalNslip),4,maxNinstances), source=0)
allocate(iRhoD(maxval(totalNslip),2,maxNinstances), source=0)
allocate(iV(maxval(totalNslip),4,maxNinstances), source=0)
allocate(iD(maxval(totalNslip),2,maxNinstances), source=0)
initializeInstances: do p = 1, size(phase_plasticity)
NofMyPhase=count(material_phase==p)
myPhase2: if (phase_plasticity(p) == PLASTICITY_NONLOCAL_ID) then
!*** determine indices to state array
l = 0
do t = 1,4
do s = 1,param(phase_plasticityInstance(p))%totalNslip
l = l + 1
iRhoU(s,t,phase_plasticityInstance(p)) = l
enddo
enddo
do t = 1,4
do s = 1,param(phase_plasticityInstance(p))%totalNslip
l = l + 1
iRhoB(s,t,phase_plasticityInstance(p)) = l
enddo
enddo
do c = 1,2
do s = 1,param(phase_plasticityInstance(p))%totalNslip
l = l + 1
iRhoD(s,c,phase_plasticityInstance(p)) = l
enddo
enddo
l = l + param(phase_plasticityInstance(p))%totalNslip ! shear(rates)
l = l + param(phase_plasticityInstance(p))%totalNslip ! rho_forest
do t = 1,4
do s = 1,param(phase_plasticityInstance(p))%totalNslip
l = l + 1
iV(s,t,phase_plasticityInstance(p)) = l
enddo
enddo
do c = 1,2
do s = 1,param(phase_plasticityInstance(p))%totalNslip
l = l + 1
iD(s,c,phase_plasticityInstance(p)) = l
enddo
enddo
if (iD(param(phase_plasticityInstance(p))%totalNslip,2,phase_plasticityInstance(p)) /= plasticState(p)%sizeState) &
call IO_error(0, ext_msg = 'state indices not properly set ('//PLASTICITY_NONLOCAL_label//')')
endif myPhase2
enddo initializeInstances
! END DEPRECATED------------------------------------------------------------------------------------
contains
!--------------------------------------------------------------------------------------------------
!> @brief populates the initial dislocation density
!--------------------------------------------------------------------------------------------------
subroutine stateInit(phase,NofMyPhase)
use math, only: &
math_sampleGaussVar
use mesh, only: &
theMesh, &
mesh_ipVolume
use material, only: &
material_phase, &
phase_plasticityInstance, &
phasememberAt
implicit none
integer,intent(in) ::&
phase, &
NofMyPhase
integer :: &
e, &
i, &
f, &
from, &
upto, &
s, &
instance, &
phasemember
real(pReal), dimension(2) :: &
noise, &
rnd
real(pReal) :: &
meanDensity, &
totalVolume, &
densityBinning, &
minimumIpVolume
real(pReal), dimension(NofMyPhase) :: &
volume
instance = phase_plasticityInstance(phase)
associate(prm => param(instance), stt => state(instance))
! randomly distribute dislocation segments on random slip system and of random type in the volume
if (prm%rhoSglRandom > 0.0_pReal) then
! get the total volume of the instance
do e = 1,theMesh%nElems
do i = 1,theMesh%elem%nIPs
if (material_phase(1,i,e) == phase) volume(phasememberAt(1,i,e)) = mesh_ipVolume(i,e)
enddo
enddo
totalVolume = sum(volume)
minimumIPVolume = minval(volume)
densityBinning = prm%rhoSglRandomBinning / minimumIpVolume ** (2.0_pReal / 3.0_pReal)
! subsequently fill random ips with dislocation segments until we reach the desired overall density
meanDensity = 0.0_pReal
do while(meanDensity < prm%rhoSglRandom)
call random_number(rnd)
phasemember = nint(rnd(1)*real(NofMyPhase,pReal) + 0.5_pReal)
s = nint(rnd(2)*real(prm%totalNslip,pReal)*4.0_pReal + 0.5_pReal)
meanDensity = meanDensity + densityBinning * volume(phasemember) / totalVolume
stt%rhoSglMobile(s,phasemember) = densityBinning
enddo
! homogeneous distribution of density with some noise
else
do e = 1, NofMyPhase
do f = 1,size(prm%Nslip,1)
from = 1 + sum(prm%Nslip(1:f-1))
upto = sum(prm%Nslip(1:f))
do s = from,upto
noise = [math_sampleGaussVar(0.0_pReal, prm%rhoSglScatter), &
math_sampleGaussVar(0.0_pReal, prm%rhoSglScatter)]
stt%rho_sgl_mob_edg_pos(s,e) = prm%rhoSglEdgePos0(f) + noise(1)
stt%rho_sgl_mob_edg_neg(s,e) = prm%rhoSglEdgeNeg0(f) + noise(1)
stt%rho_sgl_mob_scr_pos(s,e) = prm%rhoSglScrewPos0(f) + noise(2)
stt%rho_sgl_mob_scr_neg(s,e) = prm%rhoSglScrewNeg0(f) + noise(2)
enddo
stt%rho_dip_edg(from:upto,e) = prm%rhoDipEdge0(f)
stt%rho_dip_scr(from:upto,e) = prm%rhoDipScrew0(f)
enddo
enddo
endif
end associate
end subroutine stateInit
end subroutine plastic_nonlocal_init
!--------------------------------------------------------------------------------------------------
!> @brief calculates quantities characterizing the microstructure
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_dependentState(Fe, Fp, ip, el)
use prec, only: &
dEq0
use IO, only: &
IO_error
use math, only: &
PI, &
math_inner, &
math_inv33
#ifdef DEBUG
use debug, only: &
debug_level, &
debug_constitutive, &
debug_levelExtensive, &
debug_levelSelective, &
debug_i, &
debug_e
#endif
use mesh, only: &
theMesh, &
mesh_ipNeighborhood, &
mesh_ipCoordinates, &
mesh_ipVolume, &
mesh_ipAreaNormal, &
mesh_ipArea
use material, only: &
material_phase, &
phase_localPlasticity, &
phaseAt, phasememberAt, &
phase_plasticityInstance
use lattice, only: &
LATTICE_bcc_ID, &
LATTICE_fcc_ID, &
lattice_structure
implicit none
integer, intent(in) :: &
ip, &
el
real(pReal), dimension(3,3), intent(in) :: &
Fe, &
Fp
integer :: &
ph, & !< phase
of, & !< offset
no, & !< neighbor offset
ns, &
neighbor_el, & ! element number of neighboring material point
neighbor_ip, & ! integration point of neighboring material point
instance, & ! my instance of this plasticity
neighbor_instance, & ! instance of this plasticity of neighboring material point
c, & ! index of dilsocation character (edge, screw)
s, & ! slip system index
dir, &
n
real(pReal) :: &
FVsize, &
correction, &
nRealNeighbors ! number of really existing neighbors
integer, dimension(2) :: &
neighbors
real(pReal), dimension(2) :: &
rhoExcessGradient, &
rhoExcessGradient_over_rho, &
rhoTotal
real(pReal), dimension(3) :: &
rhoExcessDifferences, &
normal_latticeConf
real(pReal), dimension(3,3) :: &
invFe, & !< inverse of elastic deformation gradient
invFp, & !< inverse of plastic deformation gradient
connections, &
invConnections
real(pReal), dimension(3,theMesh%elem%nIPneighbors) :: &
connection_latticeConf
real(pReal), dimension(2,totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
rhoExcess
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
rho_edg_delta, &
rho_scr_delta
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),10) :: &
rho, &
rho_neighbor
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))), &
totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
myInteractionMatrix ! corrected slip interaction matrix
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),theMesh%elem%nIPneighbors) :: &
rho_edg_delta_neighbor, &
rho_scr_delta_neighbor
real(pReal), dimension(2,maxval(totalNslip),theMesh%elem%nIPneighbors) :: &
neighbor_rhoExcess, & ! excess density at neighboring material point
neighbor_rhoTotal ! total density at neighboring material point
real(pReal), dimension(3,totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),2) :: &
m ! direction of dislocation motion
ph = phaseAt(1,ip,el)
of = phasememberAt(1,ip,el)
instance = phase_plasticityInstance(ph)
associate(prm => param(instance),dst => microstructure(instance), stt => state(instance))
ns = prm%totalNslip
rho = getRho(instance,of,ip,el)
stt%rho_forest(:,of) = matmul(prm%forestProjection_Edge, sum(abs(rho(:,edg)),2)) &
+ matmul(prm%forestProjection_Screw,sum(abs(rho(:,scr)),2))
! coefficients are corrected for the line tension effect
! (see Kubin,Devincre,Hoc; 2008; Modeling dislocation storage rates and mean free paths in face-centered cubic crystals)
if (lattice_structure(ph) == LATTICE_bcc_ID .or. lattice_structure(ph) == LATTICE_fcc_ID) then ! only fcc and bcc
do s = 1,ns
correction = ( 1.0_pReal - prm%linetensionEffect &
+ prm%linetensionEffect &
* log(0.35_pReal * prm%burgers(s) * sqrt(max(stt%rho_forest(s,of),prm%significantRho))) &
/ log(0.35_pReal * prm%burgers(s) * 1e6_pReal)) ** 2.0_pReal
myInteractionMatrix(1:ns,s) = correction * prm%interactionSlipSlip(1:ns,s)
enddo
else
myInteractionMatrix = prm%interactionSlipSlip
endif
forall (s = 1:ns) &
dst%tau_threshold(s,of) = prm%mu * prm%burgers(s) &
* sqrt(dot_product(sum(abs(rho),2), myInteractionMatrix(1:ns,s)))
!*** calculate the dislocation stress of the neighboring excess dislocation densities
!*** zero for material points of local plasticity
!#################################################################################################
! ToDo: MD: this is most likely only correct for F_i = I
!#################################################################################################
if (.not. phase_localPlasticity(ph) .and. prm%shortRangeStressCorrection) then
invFe = math_inv33(Fe)
invFp = math_inv33(Fp)
rho_edg_delta = rho(:,mob_edg_pos) - rho(:,mob_edg_neg)
rho_scr_delta = rho(:,mob_scr_pos) - rho(:,mob_scr_neg)
rhoExcess(1,1:ns) = rho_edg_delta
rhoExcess(2,1:ns) = rho_scr_delta
FVsize = mesh_ipVolume(ip,el) ** (1.0_pReal/3.0_pReal)
!* loop through my neighborhood and get the connection vectors (in lattice frame) and the excess densities
nRealNeighbors = 0.0_pReal
neighbor_rhoTotal = 0.0_pReal
do n = 1,theMesh%elem%nIPneighbors
neighbor_el = mesh_ipNeighborhood(1,n,ip,el)
neighbor_ip = mesh_ipNeighborhood(2,n,ip,el)
no = phasememberAt(1,neighbor_ip,neighbor_el)
if (neighbor_el > 0 .and. neighbor_ip > 0) then
neighbor_instance = phase_plasticityInstance(material_phase(1,neighbor_ip,neighbor_el))
if (neighbor_instance == instance) then
nRealNeighbors = nRealNeighbors + 1.0_pReal
rho_neighbor = getRho(instance,no,neighbor_ip,neighbor_el)
rho_edg_delta_neighbor(:,n) = rho_neighbor(:,mob_edg_pos) - rho_neighbor(:,mob_edg_neg)
rho_scr_delta_neighbor(:,n) = rho_neighbor(:,mob_scr_pos) - rho_neighbor(:,mob_scr_neg)
neighbor_rhoTotal(1,:,n) = sum(abs(rho_neighbor(:,edg)),2)
neighbor_rhoTotal(2,:,n) = sum(abs(rho_neighbor(:,scr)),2)
connection_latticeConf(1:3,n) = &
matmul(invFe, mesh_ipCoordinates(1:3,neighbor_ip,neighbor_el) &
- mesh_ipCoordinates(1:3,ip,el))
normal_latticeConf = matmul(transpose(invFp), mesh_ipAreaNormal(1:3,n,ip,el))
if (math_inner(normal_latticeConf,connection_latticeConf(1:3,n)) < 0.0_pReal) & ! neighboring connection points in opposite direction to face normal: must be periodic image
connection_latticeConf(1:3,n) = normal_latticeConf * mesh_ipVolume(ip,el)/mesh_ipArea(n,ip,el) ! instead take the surface normal scaled with the diameter of the cell
else
! local neighbor or different lattice structure or different constitution instance -> use central values instead
connection_latticeConf(1:3,n) = 0.0_pReal
rho_edg_delta_neighbor(:,n) = rho_edg_delta
rho_scr_delta_neighbor(:,n) = rho_scr_delta
endif
else
! free surface -> use central values instead
connection_latticeConf(1:3,n) = 0.0_pReal
rho_edg_delta_neighbor(:,n) = rho_edg_delta
rho_scr_delta_neighbor(:,n) = rho_scr_delta
endif
enddo
neighbor_rhoExcess(1,:,:) = rho_edg_delta_neighbor
neighbor_rhoExcess(2,:,:) = rho_scr_delta_neighbor
!* loop through the slip systems and calculate the dislocation gradient by
!* 1. interpolation of the excess density in the neighorhood
!* 2. interpolation of the dead dislocation density in the central volume
m(1:3,1:ns,1) = prm%slip_direction
m(1:3,1:ns,2) = -prm%slip_transverse
do s = 1,ns
! gradient from interpolation of neighboring excess density ...
do c = 1,2
do dir = 1,3
neighbors(1) = 2 * dir - 1
neighbors(2) = 2 * dir
connections(dir,1:3) = connection_latticeConf(1:3,neighbors(1)) &
- connection_latticeConf(1:3,neighbors(2))
rhoExcessDifferences(dir) = neighbor_rhoExcess(c,s,neighbors(1)) &
- neighbor_rhoExcess(c,s,neighbors(2))
enddo
invConnections = math_inv33(connections)
if (all(dEq0(invConnections))) call IO_error(-1,ext_msg='back stress calculation: inversion error')
rhoExcessGradient(c) = math_inner(m(1:3,s,c), matmul(invConnections,rhoExcessDifferences))
enddo
! ... plus gradient from deads ...
rhoExcessGradient(1) = rhoExcessGradient(1) + sum(rho(s,imm_edg)) / FVsize
rhoExcessGradient(2) = rhoExcessGradient(2) + sum(rho(s,imm_scr)) / FVsize
! ... normalized with the total density ...
rhoTotal(1) = (sum(abs(rho(s,edg))) + sum(neighbor_rhoTotal(1,s,:))) / (1.0_pReal + nRealNeighbors)
rhoTotal(2) = (sum(abs(rho(s,scr))) + sum(neighbor_rhoTotal(2,s,:))) / (1.0_pReal + nRealNeighbors)
rhoExcessGradient_over_rho = 0.0_pReal
where(rhoTotal > 0.0_pReal) &
rhoExcessGradient_over_rho = rhoExcessGradient / rhoTotal
! ... gives the local stress correction when multiplied with a factor
dst%tau_back(s,of) = - prm%mu * prm%burgers(s) / (2.0_pReal * pi) &
* (rhoExcessGradient_over_rho(1) / (1.0_pReal - prm%nu) + rhoExcessGradient_over_rho(2))
enddo
endif
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0 &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0)) then
write(6,'(/,a,i8,1x,i2,1x,i1,/)') '<< CONST >> nonlocal_microstructure at el ip ',el,ip
write(6,'(a,/,12x,12(e10.3,1x))') '<< CONST >> rhoForest', stt%rho_forest(:,of)
write(6,'(a,/,12x,12(f10.5,1x))') '<< CONST >> tauThreshold / MPa', dst%tau_threshold(:,of)*1e-6
write(6,'(a,/,12x,12(f10.5,1x),/)') '<< CONST >> tauBack / MPa', dst%tau_back(:,of)*1e-6
endif
#endif
end associate
end subroutine plastic_nonlocal_dependentState
!--------------------------------------------------------------------------------------------------
!> @brief calculates kinetics
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_kinetics(v, dv_dtau, dv_dtauNS, tau, tauNS, &
tauThreshold, c, Temperature, instance, of)
implicit none
integer, intent(in) :: &
c, & !< dislocation character (1:edge, 2:screw)
instance, of
real(pReal), intent(in) :: &
Temperature !< temperature
real(pReal), dimension(param(instance)%totalNslip), intent(in) :: &
tau, & !< resolved external shear stress (without non Schmid effects)
tauNS, & !< resolved external shear stress (including non Schmid effects)
tauThreshold !< threshold shear stress
real(pReal), dimension(param(instance)%totalNslip), intent(out) :: &
v, & !< velocity
dv_dtau, & !< velocity derivative with respect to resolved shear stress (without non Schmid contributions)
dv_dtauNS !< velocity derivative with respect to resolved shear stress (including non Schmid contributions)
integer :: &
ns, & !< short notation for the total number of active slip systems
s !< index of my current slip system
real(pReal) :: &
tauRel_P, &
tauRel_S, &
tauEff, & !< effective shear stress
tPeierls, & !< waiting time in front of a peierls barriers
tSolidSolution, & !< waiting time in front of a solid solution obstacle
vViscous, & !< viscous glide velocity
dtPeierls_dtau, & !< derivative with respect to resolved shear stress
dtSolidSolution_dtau, & !< derivative with respect to resolved shear stress
meanfreepath_S, & !< mean free travel distance for dislocations between two solid solution obstacles
meanfreepath_P, & !< mean free travel distance for dislocations between two Peierls barriers
jumpWidth_P, & !< depth of activated area
jumpWidth_S, & !< depth of activated area
activationLength_P, & !< length of activated dislocation line
activationLength_S, & !< length of activated dislocation line
activationVolume_P, & !< volume that needs to be activated to overcome barrier
activationVolume_S, & !< volume that needs to be activated to overcome barrier
activationEnergy_P, & !< energy that is needed to overcome barrier
activationEnergy_S, & !< energy that is needed to overcome barrier
criticalStress_P, & !< maximum obstacle strength
criticalStress_S, & !< maximum obstacle strength
mobility !< dislocation mobility
associate(prm => param(instance))
ns = prm%totalNslip
v = 0.0_pReal
dv_dtau = 0.0_pReal
dv_dtauNS = 0.0_pReal
if (Temperature > 0.0_pReal) then
do s = 1,ns
if (abs(tau(s)) > tauThreshold(s)) then
!* Peierls contribution
!* Effective stress includes non Schmid constributions
!* The derivative only gives absolute values; the correct sign is taken care of in the formula for the derivative of the velocity
tauEff = max(0.0_pReal, abs(tauNS(s)) - tauThreshold(s)) ! ensure that the effective stress is positive
meanfreepath_P = prm%burgers(s)
jumpWidth_P = prm%burgers(s)
activationLength_P = prm%doublekinkwidth *prm%burgers(s)
activationVolume_P = activationLength_P * jumpWidth_P * prm%burgers(s)
criticalStress_P = prm%peierlsStress(s,c)
activationEnergy_P = criticalStress_P * activationVolume_P
tauRel_P = min(1.0_pReal, tauEff / criticalStress_P) ! ensure that the activation probability cannot become greater than one
tPeierls = 1.0_pReal / prm%fattack &
* exp(activationEnergy_P / (KB * Temperature) &
* (1.0_pReal - tauRel_P**prm%p)**prm%q)
if (tauEff < criticalStress_P) then
dtPeierls_dtau = tPeierls * prm%p * prm%q * activationVolume_P / (KB * Temperature) &
* (1.0_pReal - tauRel_P**prm%p)**(prm%q-1.0_pReal) &
* tauRel_P**(prm%p-1.0_pReal)
else
dtPeierls_dtau = 0.0_pReal
endif
!* Contribution from solid solution strengthening
!* The derivative only gives absolute values; the correct sign is taken care of in the formula for the derivative of the velocity
tauEff = abs(tau(s)) - tauThreshold(s)
meanfreepath_S = prm%burgers(s) / sqrt(prm%solidSolutionConcentration)
jumpWidth_S = prm%solidSolutionSize * prm%burgers(s)
activationLength_S = prm%burgers(s) / sqrt(prm%solidSolutionConcentration)
activationVolume_S = activationLength_S * jumpWidth_S * prm%burgers(s)
activationEnergy_S = prm%solidSolutionEnergy
criticalStress_S = activationEnergy_S / activationVolume_S
tauRel_S = min(1.0_pReal, tauEff / criticalStress_S) ! ensure that the activation probability cannot become greater than one
tSolidSolution = 1.0_pReal / prm%fattack &
* exp(activationEnergy_S / (KB * Temperature) &
* (1.0_pReal - tauRel_S**prm%p)**prm%q)
if (tauEff < criticalStress_S) then
dtSolidSolution_dtau = tSolidSolution * prm%p * prm%q &
* activationVolume_S / (KB * Temperature) &
* (1.0_pReal - tauRel_S**prm%p)**(prm%q-1.0_pReal) &
* tauRel_S**(prm%p-1.0_pReal)
else
dtSolidSolution_dtau = 0.0_pReal
endif
!* viscous glide velocity
tauEff = abs(tau(s)) - tauThreshold(s)
mobility = prm%burgers(s) / prm%viscosity
vViscous = mobility * tauEff
!* Mean velocity results from waiting time at peierls barriers and solid solution obstacles with respective meanfreepath of
!* free flight at glide velocity in between.
!* adopt sign from resolved stress
v(s) = sign(1.0_pReal,tau(s)) &
/ (tPeierls / meanfreepath_P + tSolidSolution / meanfreepath_S + 1.0_pReal / vViscous)
dv_dtau(s) = v(s) * v(s) * (dtSolidSolution_dtau / meanfreepath_S &
+ mobility / (vViscous * vViscous))
dv_dtauNS(s) = v(s) * v(s) * dtPeierls_dtau / meanfreepath_P
endif
enddo
endif
#ifdef DEBUGTODO
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauThreshold / MPa', tauThreshold * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tau / MPa', tau * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauNS / MPa', tauNS * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> v / mm/s', v * 1e3
write(6,'(a,/,12x,12(e12.5,1x))') '<< CONST >> dv_dtau', dv_dtau
write(6,'(a,/,12x,12(e12.5,1x))') '<< CONST >> dv_dtauNS', dv_dtauNS
#endif
end associate
end subroutine plastic_nonlocal_kinetics
!--------------------------------------------------------------------------------------------------
!> @brief calculates plastic velocity gradient and its tangent
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_LpAndItsTangent(Lp, dLp_dMp, &
Mp, Temperature, volume, ip, el)
use math, only: &
math_mul33xx33
use material, only: &
material_phase, &
plasticState, &
phaseAt, phasememberAt, &
phase_plasticityInstance
implicit none
integer, intent(in) :: &
ip, & !< current integration point
el !< current element number
real(pReal), intent(in) :: &
Temperature, & !< temperature
volume !< volume of the materialpoint
real(pReal), dimension(3,3), intent(in) :: &
Mp
real(pReal), dimension(3,3), intent(out) :: &
Lp !< plastic velocity gradient
real(pReal), dimension(3,3,3,3), intent(out) :: &
dLp_dMp !< derivative of Lp with respect to Tstar (9x9 matrix)
integer :: &
instance, & !< current instance of this plasticity
ns, & !< short notation for the total number of active slip systems
i, &
j, &
k, &
l, &
ph, & !phase number
of, & !offset
t, & !< dislocation type
s !< index of my current slip system
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),8) :: &
rhoSgl !< single dislocation densities (including blocked)
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),10) :: &
rho
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),4) :: &
v, & !< velocity
tauNS, & !< resolved shear stress including non Schmid and backstress terms
dv_dtau, & !< velocity derivative with respect to the shear stress
dv_dtauNS !< velocity derivative with respect to the shear stress
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
tau, & !< resolved shear stress including backstress terms
gdotTotal !< shear rate
!*** shortcut for mapping
ph = phaseAt(1,ip,el)
of = phasememberAt(1,ip,el)
instance = phase_plasticityInstance(ph)
associate(prm => param(instance),dst=>microstructure(instance))
ns = prm%totalNslip
!*** shortcut to state variables
rho = getRho(instance,of,ip,el)
rhoSgl = rho(:,sgl)
!*** get resolved shear stress
!*** for screws possible non-schmid contributions are also taken into account
do s = 1,ns
tau(s) = math_mul33xx33(Mp, prm%Schmid(1:3,1:3,s))
tauNS(s,1) = tau(s)
tauNS(s,2) = tau(s)
if (tau(s) > 0.0_pReal) then
tauNS(s,3) = math_mul33xx33(Mp, +prm%nonSchmid_pos(1:3,1:3,s))
tauNS(s,4) = math_mul33xx33(Mp, -prm%nonSchmid_neg(1:3,1:3,s))
else
tauNS(s,3) = math_mul33xx33(Mp, +prm%nonSchmid_neg(1:3,1:3,s))
tauNS(s,4) = math_mul33xx33(Mp, -prm%nonSchmid_pos(1:3,1:3,s))
endif
enddo
forall (t = 1:4) &
tauNS(1:ns,t) = tauNS(1:ns,t) + dst%tau_back(:,of)
tau = tau + dst%tau_back(:,of)
!*** get dislocation velocity and its tangent and store the velocity in the state array
! edges
call plastic_nonlocal_kinetics(v(1:ns,1), dv_dtau(1:ns,1), dv_dtauNS(1:ns,1), &
tau(1:ns), tauNS(1:ns,1), dst%tau_Threshold(1:ns,of), &
1, Temperature, instance, of)
v(1:ns,2) = v(1:ns,1)
dv_dtau(1:ns,2) = dv_dtau(1:ns,1)
dv_dtauNS(1:ns,2) = dv_dtauNS(1:ns,1)
!screws
if (size(prm%nonSchmidCoeff) == 0) then
forall(t = 3:4)
v(1:ns,t) = v(1:ns,1)
dv_dtau(1:ns,t) = dv_dtau(1:ns,1)
dv_dtauNS(1:ns,t) = dv_dtauNS(1:ns,1)
endforall
else
do t = 3,4
call plastic_nonlocal_kinetics(v(1:ns,t), dv_dtau(1:ns,t), dv_dtauNS(1:ns,t), &
tau(1:ns), tauNS(1:ns,t), dst%tau_Threshold(1:ns,of), &
2 , Temperature, instance, of)
enddo
endif
!*** store velocity in state
forall (t = 1:4) &
plasticState(ph)%state(iV(1:ns,t,instance),of) = v(1:ns,t)
!*** Bauschinger effect
forall (s = 1:ns, t = 5:8, rhoSgl(s,t) * v(s,t-4) < 0.0_pReal) &
rhoSgl(s,t-4) = rhoSgl(s,t-4) + abs(rhoSgl(s,t))
gdotTotal = sum(rhoSgl(1:ns,1:4) * v, 2) * prm%burgers(1:ns)
Lp = 0.0_pReal
dLp_dMp = 0.0_pReal
do s = 1,ns
Lp = Lp + gdotTotal(s) * prm%Schmid(1:3,1:3,s)
forall (i=1:3,j=1:3,k=1:3,l=1:3) &
dLp_dMp(i,j,k,l) = dLp_dMp(i,j,k,l) &
+ prm%Schmid(i,j,s) * prm%Schmid(k,l,s) &
* sum(rhoSgl(s,1:4) * dv_dtau(s,1:4)) * prm%burgers(s) &
+ prm%Schmid(i,j,s) &
* ( prm%nonSchmid_pos(k,l,s) * rhoSgl(s,3) * dv_dtauNS(s,3) &
- prm%nonSchmid_neg(k,l,s) * rhoSgl(s,4) * dv_dtauNS(s,4)) * prm%burgers(s)
enddo
end associate
end subroutine plastic_nonlocal_LpAndItsTangent
!--------------------------------------------------------------------------------------------------
!> @brief (instantaneous) incremental change of microstructure
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_deltaState(Mp,ip,el)
use prec, only: &
dNeq0
#ifdef DEBUG
use debug, only: &
debug_level, &
debug_constitutive, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_i, &
debug_e
#endif
use math, only: &
PI, &
math_mul33xx33
use material, only: &
material_phase, &
plasticState, &
phaseAt, phasememberAt, &
phase_plasticityInstance
implicit none
integer, intent(in) :: &
ip, &
el
real(pReal), dimension(3,3), intent(in) :: &
Mp !< MandelStress
integer :: &
ph, & !< phase
of, & !< offset
instance, & ! current instance of this plasticity
ns, & ! short notation for the total number of active slip systems
c, & ! character of dislocation
t, & ! type of dislocation
s ! index of my current slip system
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),10) :: &
deltaRhoRemobilization, & ! density increment by remobilization
deltaRhoDipole2SingleStress ! density increment by dipole dissociation (by stress change)
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),10) :: &
rho ! current dislocation densities
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),4) :: &
v ! dislocation glide velocity
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
tau ! current resolved shear stress
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),2) :: &
rhoDip, & ! current dipole dislocation densities (screw and edge dipoles)
dUpper, & ! current maximum stable dipole distance for edges and screws
dUpperOld, & ! old maximum stable dipole distance for edges and screws
deltaDUpper ! change in maximum stable dipole distance for edges and screws
ph = phaseAt(1,ip,el)
of = phasememberAt(1,ip,el)
instance = phase_plasticityInstance(ph)
associate(prm => param(instance),dst => microstructure(instance),del => deltaState(instance))
ns = totalNslip(instance)
!*** shortcut to state variables
forall (s = 1:ns, t = 1:4) &
v(s,t) = plasticState(ph)%state(iV(s,t,instance),of)
forall (s = 1:ns, c = 1:2) &
dUpperOld(s,c) = plasticState(ph)%state(iD(s,c,instance),of)
rho = getRho(instance,of,ip,el)
rhoDip = rho(:,dip)
!****************************************************************************
!*** dislocation remobilization (bauschinger effect)
where(rho(:,imm) * v < 0.0_pReal)
deltaRhoRemobilization(:,mob) = abs(rho(:,imm))
deltaRhoRemobilization(:,imm) = - rho(:,imm)
rho(:,mob) = rho(:,mob) + abs(rho(:,imm))
rho(:,imm) = 0.0_pReal
elsewhere
deltaRhoRemobilization(:,mob) = 0.0_pReal
deltaRhoRemobilization(:,imm) = 0.0_pReal
endwhere
deltaRhoRemobilization(:,dip) = 0.0_pReal
!****************************************************************************
!*** calculate dipole formation and dissociation by stress change
!*** calculate limits for stable dipole height
do s = 1,prm%totalNslip
tau(s) = math_mul33xx33(Mp, prm%Schmid(1:3,1:3,s)) +dst%tau_back(s,of)
if (abs(tau(s)) < 1.0e-15_pReal) tau(s) = 1.0e-15_pReal
enddo
dUpper(1:ns,1) = prm%mu * prm%burgers/(8.0_pReal * PI * (1.0_pReal - prm%nu) * abs(tau))
dUpper(1:ns,2) = prm%mu * prm%burgers/(4.0_pReal * PI * abs(tau))
where(dNeq0(sqrt(sum(abs(rho(:,edg)),2)))) &
dUpper(1:ns,1) = min(1.0_pReal/sqrt(sum(abs(rho(:,edg)),2)),dUpper(1:ns,1))
where(dNeq0(sqrt(sum(abs(rho(:,scr)),2)))) &
dUpper(1:ns,2) = min(1.0_pReal/sqrt(sum(abs(rho(:,scr)),2)),dUpper(1:ns,2))
dUpper = max(dUpper,prm%minDipoleHeight)
deltaDUpper = dUpper - dUpperOld
!*** dissociation by stress increase
deltaRhoDipole2SingleStress = 0.0_pReal
forall (c=1:2, s=1:ns, deltaDUpper(s,c) < 0.0_pReal .and. &
dNeq0(dUpperOld(s,c) - prm%minDipoleHeight(s,c))) &
deltaRhoDipole2SingleStress(s,8+c) = rhoDip(s,c) * deltaDUpper(s,c) &
/ (dUpperOld(s,c) - prm%minDipoleHeight(s,c))
forall (t=1:4) &
deltaRhoDipole2SingleStress(1:ns,t) = -0.5_pReal &
* deltaRhoDipole2SingleStress(1:ns,(t-1)/2+9)
forall (s = 1:ns, c = 1:2) &
plasticState(ph)%state(iD(s,c,instance),of) = dUpper(s,c)
plasticState(ph)%deltaState(:,of) = 0.0_pReal
del%rho(:,of) = reshape(deltaRhoRemobilization + deltaRhoDipole2SingleStress, [10*ns])
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0 &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0 )) then
write(6,'(a,/,8(12x,12(e12.5,1x),/))') '<< CONST >> dislocation remobilization', deltaRhoRemobilization(1:ns,1:8)
write(6,'(a,/,10(12x,12(e12.5,1x),/),/)') '<< CONST >> dipole dissociation by stress increase', deltaRhoDipole2SingleStress
endif
#endif
end associate
end subroutine plastic_nonlocal_deltaState
!---------------------------------------------------------------------------------------------------
!> @brief calculates the rate of change of microstructure
!---------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_dotState(Mp, Fe, Fp, Temperature, &
timestep,ip,el)
use, intrinsic :: &
IEEE_arithmetic
use prec, only: &
dNeq0, &
dNeq, &
dEq0
use IO, only: &
IO_error
#ifdef DEBUG
use debug, only: &
debug_level, &
debug_constitutive, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_i, &
debug_e
#endif
use math, only: &
math_inner, &
math_mul33xx33, &
math_inv33, &
math_det33, &
PI
use mesh, only: &
theMesh, &
mesh_ipNeighborhood, &
mesh_ipVolume, &
mesh_ipArea, &
mesh_ipAreaNormal
use material, only: &
homogenization_maxNgrains, &
material_phase, &
phase_plasticityInstance, &
phase_localPlasticity, &
plasticState, &
phaseAt, phasememberAt, &
phase_plasticity ,&
PLASTICITY_NONLOCAL_ID
use lattice, only: &
lattice_structure, &
LATTICE_bcc_ID, &
LATTICE_fcc_ID
implicit none
integer, intent(in) :: &
ip, & !< current integration point
el !< current element number
real(pReal), intent(in) :: &
Temperature, & !< temperature
timestep !< substepped crystallite time increment
real(pReal), dimension(3,3), intent(in) ::&
Mp !< MandelStress
real(pReal), dimension(3,3,homogenization_maxNgrains,theMesh%elem%nIPs,theMesh%nElems), intent(in) :: &
Fe, & !< elastic deformation gradient
Fp !< plastic deformation gradient
integer :: &
ph, &
instance, & !< current instance of this plasticity
neighbor_instance, & !< instance of my neighbor's plasticity
ns, & !< short notation for the total number of active slip systems
c, & !< character of dislocation
n, & !< index of my current neighbor
neighbor_el, & !< element number of my neighbor
neighbor_ip, & !< integration point of my neighbor
neighbor_n, & !< neighbor index pointing to me when looking from my neighbor
opposite_neighbor, & !< index of my opposite neighbor
opposite_ip, & !< ip of my opposite neighbor
opposite_el, & !< element index of my opposite neighbor
opposite_n, & !< neighbor index pointing to me when looking from my opposite neighbor
t, & !< type of dislocation
o,& !< offset shortcut
no,& !< neighbour offset shortcut
p,& !< phase shortcut
np,& !< neighbour phase shortcut
topp, & !< type of dislocation with opposite sign to t
s !< index of my current slip system
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),10) :: &
rho, &
rhoDot, & !< density evolution
rhoDotMultiplication, & !< density evolution by multiplication
rhoDotFlux, & !< density evolution by flux
rhoDotSingle2DipoleGlide, & !< density evolution by dipole formation (by glide)
rhoDotAthermalAnnihilation, & !< density evolution by athermal annihilation
rhoDotThermalAnnihilation !< density evolution by thermal annihilation
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),8) :: &
rhoSgl, & !< current single dislocation densities (positive/negative screw and edge without dipoles)
neighbor_rhoSgl, & !< current single dislocation densities of neighboring ip (positive/negative screw and edge without dipoles)
my_rhoSgl !< single dislocation densities of central ip (positive/negative screw and edge without dipoles)
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),4) :: &
v, & !< current dislocation glide velocity
my_v, & !< dislocation glide velocity of central ip
neighbor_v, & !< dislocation glide velocity of enighboring ip
gdot !< shear rates
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el)))) :: &
tau, & !< current resolved shear stress
vClimb !< climb velocity of edge dipoles
real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),2) :: &
rhoDip, & !< current dipole dislocation densities (screw and edge dipoles)
dLower, & !< minimum stable dipole distance for edges and screws
dUpper !< current maximum stable dipole distance for edges and screws
real(pReal), dimension(3,totalNslip(phase_plasticityInstance(material_phase(1,ip,el))),4) :: &
m !< direction of dislocation motion
real(pReal), dimension(3,3) :: &
my_F, & !< my total deformation gradient
neighbor_F, & !< total deformation gradient of my neighbor
my_Fe, & !< my elastic deformation gradient
neighbor_Fe, & !< elastic deformation gradient of my neighbor
Favg !< average total deformation gradient of me and my neighbor
real(pReal), dimension(3) :: &
normal_neighbor2me, & !< interface normal pointing from my neighbor to me in neighbor's lattice configuration
normal_neighbor2me_defConf, & !< interface normal pointing from my neighbor to me in shared deformed configuration
normal_me2neighbor, & !< interface normal pointing from me to my neighbor in my lattice configuration
normal_me2neighbor_defConf !< interface normal pointing from me to my neighbor in shared deformed configuration
real(pReal) :: &
area, & !< area of the current interface
transmissivity, & !< overall transmissivity of dislocation flux to neighboring material point
lineLength, & !< dislocation line length leaving the current interface
selfDiffusion !< self diffusion
logical :: &
considerEnteringFlux, &
considerLeavingFlux
p = phaseAt(1,ip,el)
o = phasememberAt(1,ip,el)
if (timestep <= 0.0_pReal) then
plasticState(p)%dotState = 0.0_pReal
return
endif
ph = material_phase(1,ip,el)
instance = phase_plasticityInstance(ph)
associate(prm => param(instance),dst => microstructure(instance),dot => dotState(instance),stt => state(instance))
ns = totalNslip(instance)
tau = 0.0_pReal
gdot = 0.0_pReal
rho = getRho(instance,o,ip,el)
rhoSgl = rho(:,sgl)
rhoDip = rho(:,dip)
forall (s = 1:ns, t = 1:4)
v(s,t) = plasticState(p)%state(iV (s,t,instance),o)
endforall
!****************************************************************************
!*** Calculate shear rate
forall (t = 1:4) &
gdot(1:ns,t) = rhoSgl(1:ns,t) * prm%burgers(1:ns) * v(1:ns,t)
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0 &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0 )) then
write(6,'(a,/,10(12x,12(e12.5,1x),/))') '<< CONST >> rho / 1/m^2', rhoSgl, rhoDip
write(6,'(a,/,4(12x,12(e12.5,1x),/))') '<< CONST >> gdot / 1/s',gdot
endif
#endif
!****************************************************************************
!*** calculate limits for stable dipole height
do s = 1,ns ! loop over slip systems
tau(s) = math_mul33xx33(Mp, prm%Schmid(1:3,1:3,s)) + dst%tau_back(s,o)
if (abs(tau(s)) < 1.0e-15_pReal) tau(s) = 1.0e-15_pReal
enddo
dLower = prm%minDipoleHeight
dUpper(1:ns,1) = prm%mu * prm%burgers/(8.0_pReal * PI * (1.0_pReal - prm%nu) * abs(tau))
dUpper(1:ns,2) = prm%mu * prm%burgers/(4.0_pReal * PI * abs(tau))
where(dNeq0(sqrt(sum(abs(rho(:,edg)),2)))) &
dUpper(1:ns,1) = min(1.0_pReal/sqrt(sum(abs(rho(:,edg)),2)),dUpper(1:ns,1))
where(dNeq0(sqrt(sum(abs(rho(:,scr)),2)))) &
dUpper(1:ns,2) = min(1.0_pReal/sqrt(sum(abs(rho(:,scr)),2)),dUpper(1:ns,2))
dUpper = max(dUpper,dLower)
!****************************************************************************
!*** calculate dislocation multiplication
rhoDotMultiplication = 0.0_pReal
isBCC: if (lattice_structure(ph) == LATTICE_bcc_ID) then
forall (s = 1:ns, sum(abs(v(s,1:4))) > 0.0_pReal)
rhoDotMultiplication(s,1:2) = sum(abs(gdot(s,3:4))) / prm%burgers(s) & ! assuming double-cross-slip of screws to be decisive for multiplication
* sqrt(stt%rho_forest(s,o)) / prm%lambda0(s) ! & ! mean free path
! * 2.0_pReal * sum(abs(v(s,3:4))) / sum(abs(v(s,1:4))) ! ratio of screw to overall velocity determines edge generation
rhoDotMultiplication(s,3:4) = sum(abs(gdot(s,3:4))) /prm%burgers(s) & ! assuming double-cross-slip of screws to be decisive for multiplication
* sqrt(stt%rho_forest(s,o)) / prm%lambda0(s) ! & ! mean free path
! * 2.0_pReal * sum(abs(v(s,1:2))) / sum(abs(v(s,1:4))) ! ratio of edge to overall velocity determines screw generation
endforall
else isBCC
rhoDotMultiplication(1:ns,1:4) = spread( &
(sum(abs(gdot(1:ns,1:2)),2) * prm%fEdgeMultiplication + sum(abs(gdot(1:ns,3:4)),2)) &
* sqrt(stt%rho_forest(:,o)) / prm%lambda0 / prm%burgers(1:ns), 2, 4)
endif isBCC
!****************************************************************************
!*** calculate dislocation fluxes (only for nonlocal plasticity)
rhoDotFlux = 0.0_pReal
if (.not. phase_localPlasticity(material_phase(1,ip,el))) then
!*** check CFL (Courant-Friedrichs-Lewy) condition for flux
if (any( abs(gdot) > 0.0_pReal & ! any active slip system ...
.and. prm%CFLfactor * abs(v) * timestep &
> mesh_ipVolume(ip,el) / maxval(mesh_ipArea(:,ip,el)))) then ! ...with velocity above critical value (we use the reference volume and area for simplicity here)
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0) then
write(6,'(a,i5,a,i2)') '<< CONST >> CFL condition not fullfilled at el ',el,' ip ',ip
write(6,'(a,e10.3,a,e10.3)') '<< CONST >> velocity is at ', &
maxval(abs(v), abs(gdot) > 0.0_pReal &
.and. prm%CFLfactor * abs(v) * timestep &
> mesh_ipVolume(ip,el) / maxval(mesh_ipArea(:,ip,el))), &
' at a timestep of ',timestep
write(6,'(a)') '<< CONST >> enforcing cutback !!!'
endif
#endif
plasticState(p)%dotState = IEEE_value(1.0_pReal,IEEE_quiet_NaN) ! -> return NaN and, hence, enforce cutback
return
endif
!*** be aware of the definition of slip_transverse = slip_direction x slip_normal !!!
!*** opposite sign to our p vector in the (s,p,n) triplet !!!
m(1:3,1:ns,1) = prm%slip_direction
m(1:3,1:ns,2) = -prm%slip_direction
m(1:3,1:ns,3) = -prm%slip_transverse
m(1:3,1:ns,4) = prm%slip_transverse
my_Fe = Fe(1:3,1:3,1,ip,el)
my_F = matmul(my_Fe, Fp(1:3,1:3,1,ip,el))
neighbors: do n = 1,theMesh%elem%nIPneighbors
neighbor_el = mesh_ipNeighborhood(1,n,ip,el)
neighbor_ip = mesh_ipNeighborhood(2,n,ip,el)
neighbor_n = mesh_ipNeighborhood(3,n,ip,el)
np = phaseAt(1,neighbor_ip,neighbor_el)
no = phasememberAt(1,neighbor_ip,neighbor_el)
opposite_neighbor = n + mod(n,2) - mod(n+1,2)
opposite_el = mesh_ipNeighborhood(1,opposite_neighbor,ip,el)
opposite_ip = mesh_ipNeighborhood(2,opposite_neighbor,ip,el)
opposite_n = mesh_ipNeighborhood(3,opposite_neighbor,ip,el)
if (neighbor_n > 0) then ! if neighbor exists, average deformation gradient
neighbor_instance = phase_plasticityInstance(material_phase(1,neighbor_ip,neighbor_el))
neighbor_Fe = Fe(1:3,1:3,1,neighbor_ip,neighbor_el)
neighbor_F = matmul(neighbor_Fe, Fp(1:3,1:3,1,neighbor_ip,neighbor_el))
Favg = 0.5_pReal * (my_F + neighbor_F)
else ! if no neighbor, take my value as average
Favg = my_F
endif
!* FLUX FROM MY NEIGHBOR TO ME
!* This is only considered, if I have a neighbor of nonlocal plasticity
!* (also nonlocal constitutive law with local properties) that is at least a little bit
!* compatible.
!* If it's not at all compatible, no flux is arriving, because everything is dammed in front of
!* my neighbor's interface.
!* The entering flux from my neighbor will be distributed on my slip systems according to the
!*compatibility
considerEnteringFlux = .false.
neighbor_v = 0.0_pReal ! needed for check of sign change in flux density below
neighbor_rhoSgl = 0.0_pReal
if (neighbor_n > 0) then
if (phase_plasticity(material_phase(1,neighbor_ip,neighbor_el)) == PLASTICITY_NONLOCAL_ID &
.and. any(compatibility(:,:,:,n,ip,el) > 0.0_pReal)) &
considerEnteringFlux = .true.
endif
enteringFlux: if (considerEnteringFlux) then
forall (s = 1:ns, t = 1:4)
neighbor_v(s,t) = plasticState(np)%state(iV (s,t,neighbor_instance),no)
neighbor_rhoSgl(s,t) = max(plasticState(np)%state(iRhoU(s,t,neighbor_instance),no), &
0.0_pReal)
endforall
where (neighbor_rhoSgl * mesh_ipVolume(neighbor_ip,neighbor_el) ** 0.667_pReal < prm%significantN &
.or. neighbor_rhoSgl < prm%significantRho) &
neighbor_rhoSgl = 0.0_pReal
normal_neighbor2me_defConf = math_det33(Favg) * matmul(math_inv33(transpose(Favg)), &
mesh_ipAreaNormal(1:3,neighbor_n,neighbor_ip,neighbor_el)) ! calculate the normal of the interface in (average) deformed configuration (now pointing from my neighbor to me!!!)
normal_neighbor2me = matmul(transpose(neighbor_Fe), normal_neighbor2me_defConf) &
/ math_det33(neighbor_Fe) ! interface normal in the lattice configuration of my neighbor
area = mesh_ipArea(neighbor_n,neighbor_ip,neighbor_el) * norm2(normal_neighbor2me)
normal_neighbor2me = normal_neighbor2me / norm2(normal_neighbor2me) ! normalize the surface normal to unit length
do s = 1,ns
do t = 1,4
c = (t + 1) / 2
topp = t + mod(t,2) - mod(t+1,2)
if (neighbor_v(s,t) * math_inner(m(1:3,s,t), normal_neighbor2me) > 0.0_pReal & ! flux from my neighbor to me == entering flux for me
.and. v(s,t) * neighbor_v(s,t) >= 0.0_pReal ) then ! ... only if no sign change in flux density
lineLength = neighbor_rhoSgl(s,t) * neighbor_v(s,t) &
* math_inner(m(1:3,s,t), normal_neighbor2me) * area ! positive line length that wants to enter through this interface
where (compatibility(c,1:ns,s,n,ip,el) > 0.0_pReal) & ! positive compatibility...
rhoDotFlux(1:ns,t) = rhoDotFlux(1:ns,t) &
+ lineLength / mesh_ipVolume(ip,el) & ! ... transferring to equally signed mobile dislocation type
* compatibility(c,1:ns,s,n,ip,el) ** 2.0_pReal
where (compatibility(c,1:ns,s,n,ip,el) < 0.0_pReal) & ! ..negative compatibility...
rhoDotFlux(1:ns,topp) = rhoDotFlux(1:ns,topp) &
+ lineLength / mesh_ipVolume(ip,el) & ! ... transferring to opposite signed mobile dislocation type
* compatibility(c,1:ns,s,n,ip,el) ** 2.0_pReal
endif
enddo
enddo
endif enteringFlux
!* FLUX FROM ME TO MY NEIGHBOR
!* This is not considered, if my opposite neighbor has a different constitutive law than nonlocal (still considered for nonlocal law with local properties).
!* Then, we assume, that the opposite(!) neighbor sends an equal amount of dislocations to me.
!* So the net flux in the direction of my neighbor is equal to zero:
!* leaving flux to neighbor == entering flux from opposite neighbor
!* In case of reduced transmissivity, part of the leaving flux is stored as dead dislocation density.
!* That means for an interface of zero transmissivity the leaving flux is fully converted to dead dislocations.
considerLeavingFlux = .true.
if (opposite_n > 0) then
if (phase_plasticity(material_phase(1,opposite_ip,opposite_el)) /= PLASTICITY_NONLOCAL_ID) &
considerLeavingFlux = .false.
endif
leavingFlux: if (considerLeavingFlux) then
my_rhoSgl = rhoSgl
my_v = v
normal_me2neighbor_defConf = math_det33(Favg) &
* matmul(math_inv33(transpose(Favg)), &
mesh_ipAreaNormal(1:3,n,ip,el)) ! calculate the normal of the interface in (average) deformed configuration (pointing from me to my neighbor!!!)
normal_me2neighbor = matmul(transpose(my_Fe), normal_me2neighbor_defConf) &
/ math_det33(my_Fe) ! interface normal in my lattice configuration
area = mesh_ipArea(n,ip,el) * norm2(normal_me2neighbor)
normal_me2neighbor = normal_me2neighbor / norm2(normal_me2neighbor) ! normalize the surface normal to unit length
do s = 1,ns
do t = 1,4
c = (t + 1) / 2
if (my_v(s,t) * math_inner(m(1:3,s,t), normal_me2neighbor) > 0.0_pReal ) then ! flux from me to my neighbor == leaving flux for me (might also be a pure flux from my mobile density to dead density if interface not at all transmissive)
if (my_v(s,t) * neighbor_v(s,t) >= 0.0_pReal) then ! no sign change in flux density
transmissivity = sum(compatibility(c,1:ns,s,n,ip,el)**2.0_pReal) ! overall transmissivity from this slip system to my neighbor
else ! sign change in flux density means sign change in stress which does not allow for dislocations to arive at the neighbor
transmissivity = 0.0_pReal
endif
lineLength = my_rhoSgl(s,t) * my_v(s,t) &
* math_inner(m(1:3,s,t), normal_me2neighbor) * area ! positive line length of mobiles that wants to leave through this interface
rhoDotFlux(s,t) = rhoDotFlux(s,t) - lineLength / mesh_ipVolume(ip,el) ! subtract dislocation flux from current type
rhoDotFlux(s,t+4) = rhoDotFlux(s,t+4) &
+ lineLength / mesh_ipVolume(ip,el) * (1.0_pReal - transmissivity) &
* sign(1.0_pReal, my_v(s,t)) ! dislocation flux that is not able to leave through interface (because of low transmissivity) will remain as immobile single density at the material point
endif
enddo
enddo
endif leavingFlux
enddo neighbors
endif
!****************************************************************************
!*** calculate dipole formation and annihilation
!*** formation by glide
do c = 1,2
rhoDotSingle2DipoleGlide(1:ns,2*c-1) = -2.0_pReal * dUpper(1:ns,c) / prm%burgers(1:ns) &
* (rhoSgl(1:ns,2*c-1) * abs(gdot(1:ns,2*c)) & ! negative mobile --> positive mobile
+ rhoSgl(1:ns,2*c) * abs(gdot(1:ns,2*c-1)) & ! positive mobile --> negative mobile
+ abs(rhoSgl(1:ns,2*c+4)) * abs(gdot(1:ns,2*c-1))) ! positive mobile --> negative immobile
rhoDotSingle2DipoleGlide(1:ns,2*c) = -2.0_pReal * dUpper(1:ns,c) / prm%burgers(1:ns) &
* (rhoSgl(1:ns,2*c-1) * abs(gdot(1:ns,2*c)) & ! negative mobile --> positive mobile
+ rhoSgl(1:ns,2*c) * abs(gdot(1:ns,2*c-1)) & ! positive mobile --> negative mobile
+ abs(rhoSgl(1:ns,2*c+3)) * abs(gdot(1:ns,2*c))) ! negative mobile --> positive immobile
rhoDotSingle2DipoleGlide(1:ns,2*c+3) = -2.0_pReal * dUpper(1:ns,c) / prm%burgers(1:ns) &
* rhoSgl(1:ns,2*c+3) * abs(gdot(1:ns,2*c)) ! negative mobile --> positive immobile
rhoDotSingle2DipoleGlide(1:ns,2*c+4) = -2.0_pReal * dUpper(1:ns,c) / prm%burgers(1:ns)&
* rhoSgl(1:ns,2*c+4) * abs(gdot(1:ns,2*c-1)) ! positive mobile --> negative immobile
rhoDotSingle2DipoleGlide(1:ns,c+8) = - rhoDotSingle2DipoleGlide(1:ns,2*c-1) &
- rhoDotSingle2DipoleGlide(1:ns,2*c) &
+ abs(rhoDotSingle2DipoleGlide(1:ns,2*c+3)) &
+ abs(rhoDotSingle2DipoleGlide(1:ns,2*c+4))
enddo
!*** athermal annihilation
rhoDotAthermalAnnihilation = 0.0_pReal
forall (c=1:2) &
rhoDotAthermalAnnihilation(1:ns,c+8) = -2.0_pReal * dLower(1:ns,c) / prm%burgers(1:ns) &
* ( 2.0_pReal * (rhoSgl(1:ns,2*c-1) * abs(gdot(1:ns,2*c)) + rhoSgl(1:ns,2*c) * abs(gdot(1:ns,2*c-1))) & ! was single hitting single
+ 2.0_pReal * (abs(rhoSgl(1:ns,2*c+3)) * abs(gdot(1:ns,2*c)) + abs(rhoSgl(1:ns,2*c+4)) * abs(gdot(1:ns,2*c-1))) & ! was single hitting immobile single or was immobile single hit by single
+ rhoDip(1:ns,c) * (abs(gdot(1:ns,2*c-1)) + abs(gdot(1:ns,2*c)))) ! single knocks dipole constituent
! annihilated screw dipoles leave edge jogs behind on the colinear system
if (lattice_structure(ph) == LATTICE_fcc_ID) &
forall (s = 1:ns, prm%colinearSystem(s) > 0) &
rhoDotAthermalAnnihilation(prm%colinearSystem(s),1:2) = - rhoDotAthermalAnnihilation(s,10) &
* 0.25_pReal * sqrt(stt%rho_forest(s,o)) * (dUpper(s,2) + dLower(s,2)) * prm%edgeJogFactor
!*** thermally activated annihilation of edge dipoles by climb
rhoDotThermalAnnihilation = 0.0_pReal
selfDiffusion = prm%Dsd0 * exp(-prm%selfDiffusionEnergy / (KB * Temperature))
vClimb = prm%atomicVolume * selfDiffusion / ( KB * Temperature ) &
* prm%mu / ( 2.0_pReal * PI * (1.0_pReal-prm%nu) ) &
* 2.0_pReal / ( dUpper(1:ns,1) + dLower(1:ns,1) )
forall (s = 1:ns, dUpper(s,1) > dLower(s,1)) &
rhoDotThermalAnnihilation(s,9) = max(- 4.0_pReal * rhoDip(s,1) * vClimb(s) / (dUpper(s,1) - dLower(s,1)), &
- rhoDip(s,1) / timestep - rhoDotAthermalAnnihilation(s,9) &
- rhoDotSingle2DipoleGlide(s,9)) ! make sure that we do not annihilate more dipoles than we have
rhoDot = 0.0_pReal
rhoDot = rhoDotFlux &
+ rhoDotMultiplication &
+ rhoDotSingle2DipoleGlide &
+ rhoDotAthermalAnnihilation &
+ rhoDotThermalAnnihilation
results(instance)%rhoDotFlux(1:ns,1:8,o) = rhoDotFlux(1:ns,1:8)
results(instance)%rhoDotMultiplication(1:ns,1:2,o) = rhoDotMultiplication(1:ns,[1,3])
results(instance)%rhoDotSingle2DipoleGlide(1:ns,1:2,o) = rhoDotSingle2DipoleGlide(1:ns,9:10)
results(instance)%rhoDotAthermalAnnihilation(1:ns,1:2,o) = rhoDotAthermalAnnihilation(1:ns,9:10)
results(instance)%rhoDotThermalAnnihilation(1:ns,1:2,o) = rhoDotThermalAnnihilation(1:ns,9:10)
results(instance)%rhoDotEdgeJogs(1:ns,o) = 2.0_pReal * rhoDotThermalAnnihilation(1:ns,1)
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0 &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0 )) then
write(6,'(a,/,4(12x,12(e12.5,1x),/))') '<< CONST >> dislocation multiplication', &
rhoDotMultiplication(1:ns,1:4) * timestep
write(6,'(a,/,8(12x,12(e12.5,1x),/))') '<< CONST >> dislocation flux', &
rhoDotFlux(1:ns,1:8) * timestep
write(6,'(a,/,10(12x,12(e12.5,1x),/))') '<< CONST >> dipole formation by glide', &
rhoDotSingle2DipoleGlide * timestep
write(6,'(a,/,10(12x,12(e12.5,1x),/))') '<< CONST >> athermal dipole annihilation', &
rhoDotAthermalAnnihilation * timestep
write(6,'(a,/,2(12x,12(e12.5,1x),/))') '<< CONST >> thermally activated dipole annihilation', &
rhoDotThermalAnnihilation(1:ns,9:10) * timestep
write(6,'(a,/,10(12x,12(e12.5,1x),/))') '<< CONST >> total density change', &
rhoDot * timestep
write(6,'(a,/,10(12x,12(f12.5,1x),/))') '<< CONST >> relative density change', &
rhoDot(1:ns,1:8) * timestep / (abs(stt%rho(:,sgl))+1.0e-10), &
rhoDot(1:ns,9:10) * timestep / (stt%rho(:,dip)+1.0e-10)
write(6,*)
endif
#endif
if ( any(rho(:,mob) + rhoDot(1:ns,1:4) * timestep < -prm%aTolRho) &
.or. any(rho(:,dip) + rhoDot(1:ns,9:10) * timestep < -prm%aTolRho)) then
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0) then
write(6,'(a,i5,a,i2)') '<< CONST >> evolution rate leads to negative density at el ',el,' ip ',ip
write(6,'(a)') '<< CONST >> enforcing cutback !!!'
endif
#endif
plasticState(p)%dotState = IEEE_value(1.0_pReal,IEEE_quiet_NaN)
else
forall (s = 1:ns, t = 1:4)
plasticState(p)%dotState(iRhoU(s,t,instance),o) = rhoDot(s,t)
plasticState(p)%dotState(iRhoB(s,t,instance),o) = rhoDot(s,t+4)
endforall
forall (s = 1:ns, c = 1:2) &
plasticState(p)%dotState(iRhoD(s,c,instance),o) = rhoDot(s,c+8)
forall (s = 1:ns) &
dot%accumulatedshear(s,o) = sum(gdot(s,1:4))
endif
end associate
end subroutine plastic_nonlocal_dotState
!--------------------------------------------------------------------------------------------------
!> @brief Compatibility update
!> @detail Compatibility is defined as normalized product of signed cosine of the angle between the slip
! plane normals and signed cosine of the angle between the slip directions. Only the largest values
! that sum up to a total of 1 are considered, all others are set to zero.
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_updateCompatibility(orientation,i,e)
use math, only: &
math_inner, &
math_qRot
use rotations, only: &
rotation
use material, only: &
material_phase, &
material_texture, &
phase_localPlasticity, &
phase_plasticityInstance
use mesh, only: &
mesh_ipNeighborhood, &
theMesh
use lattice, only: &
lattice_qDisorientation
implicit none
integer, intent(in) :: &
i, &
e
type(rotation), dimension(1,theMesh%elem%nIPs,theMesh%nElems), intent(in) :: &
orientation ! crystal orientation in quaternions
integer :: &
Nneighbors, & ! number of neighbors
n, & ! neighbor index
neighbor_e, & ! element index of my neighbor
neighbor_i, & ! integration point index of my neighbor
ph, &
neighbor_phase, &
textureID, &
neighbor_textureID, &
instance, & ! instance of plasticity
ns, & ! number of active slip systems
s1, & ! slip system index (me)
s2 ! slip system index (my neighbor)
real(pReal), dimension(4) :: &
absoluteMisorientation ! absolute misorientation (without symmetry) between me and my neighbor
real(pReal), dimension(2,totalNslip(phase_plasticityInstance(material_phase(1,i,e))),&
totalNslip(phase_plasticityInstance(material_phase(1,i,e))),&
theMesh%elem%nIPneighbors) :: &
my_compatibility ! my_compatibility for current element and ip
real(pReal) :: &
my_compatibilitySum, &
thresholdValue, &
nThresholdValues
logical, dimension(totalNslip(phase_plasticityInstance(material_phase(1,i,e)))) :: &
belowThreshold
type(rotation) :: rot
Nneighbors = theMesh%elem%nIPneighbors
ph = material_phase(1,i,e)
textureID = material_texture(1,i,e)
instance = phase_plasticityInstance(ph)
ns = totalNslip(instance)
associate(prm => param(instance))
!*** start out fully compatible
my_compatibility = 0.0_pReal
forall(s1 = 1:ns) my_compatibility(1:2,s1,s1,1:Nneighbors) = 1.0_pReal
!*** Loop thrugh neighbors and check whether there is any compatibility.
neighbors: do n = 1,Nneighbors
neighbor_e = mesh_ipNeighborhood(1,n,i,e)
neighbor_i = mesh_ipNeighborhood(2,n,i,e)
!* FREE SURFACE
!* Set surface transmissivity to the value specified in the material.config
if (neighbor_e <= 0 .or. neighbor_i <= 0) then
forall(s1 = 1:ns) my_compatibility(1:2,s1,s1,n) = sqrt(prm%surfaceTransmissivity)
cycle
endif
!* PHASE BOUNDARY
!* If we encounter a different nonlocal phase at the neighbor,
!* we consider this to be a real "physical" phase boundary, so completely incompatible.
!* If one of the two phases has a local plasticity law,
!* we do not consider this to be a phase boundary, so completely compatible.
neighbor_phase = material_phase(1,neighbor_i,neighbor_e)
if (neighbor_phase /= ph) then
if (.not. phase_localPlasticity(neighbor_phase) .and. .not. phase_localPlasticity(ph))&
forall(s1 = 1:ns) my_compatibility(1:2,s1,s1,n) = 0.0_pReal
cycle
endif
!* GRAIN BOUNDARY !
!* fixed transmissivity for adjacent ips with different texture (only if explicitly given in material.config)
if (prm%grainboundaryTransmissivity >= 0.0_pReal) then
neighbor_textureID = material_texture(1,neighbor_i,neighbor_e)
if (neighbor_textureID /= textureID) then
if (.not. phase_localPlasticity(neighbor_phase)) then
forall(s1 = 1:ns) &
my_compatibility(1:2,s1,s1,n) = sqrt(prm%grainboundaryTransmissivity)
endif
cycle
endif
!* GRAIN BOUNDARY ?
!* Compatibility defined by relative orientation of slip systems:
!* The my_compatibility value is defined as the product of the slip normal projection and the slip direction projection.
!* Its sign is always positive for screws, for edges it has the same sign as the slip normal projection.
!* Since the sum for each slip system can easily exceed one (which would result in a transmissivity larger than one),
!* only values above or equal to a certain threshold value are considered. This threshold value is chosen, such that
!* the number of compatible slip systems is minimized with the sum of the original compatibility values exceeding one.
!* Finally the smallest compatibility value is decreased until the sum is exactly equal to one.
!* All values below the threshold are set to zero.
else
rot = orientation(1,i,e)%misorientation(orientation(1,neighbor_i,neighbor_e))
absoluteMisorientation = rot%asQuaternion()
mySlipSystems: do s1 = 1,ns
neighborSlipSystems: do s2 = 1,ns
my_compatibility(1,s2,s1,n) = math_inner(prm%slip_normal(1:3,s1), &
math_qRot(absoluteMisorientation, prm%slip_normal(1:3,s2))) &
* abs(math_inner(prm%slip_direction(1:3,s1), &
math_qRot(absoluteMisorientation, prm%slip_direction(1:3,s2))))
my_compatibility(2,s2,s1,n) = abs(math_inner(prm%slip_normal(1:3,s1), &
math_qRot(absoluteMisorientation, prm%slip_normal(1:3,s2)))) &
* abs(math_inner(prm%slip_direction(1:3,s1), &
math_qRot(absoluteMisorientation, prm%slip_direction(1:3,s2))))
enddo neighborSlipSystems
my_compatibilitySum = 0.0_pReal
belowThreshold = .true.
do while (my_compatibilitySum < 1.0_pReal .and. any(belowThreshold(1:ns)))
thresholdValue = maxval(my_compatibility(2,1:ns,s1,n), belowThreshold(1:ns)) ! screws always positive
nThresholdValues = real(count(my_compatibility(2,1:ns,s1,n) >= thresholdValue),pReal)
where (my_compatibility(2,1:ns,s1,n) >= thresholdValue) &
belowThreshold(1:ns) = .false.
if (my_compatibilitySum + thresholdValue * nThresholdValues > 1.0_pReal) &
where (abs(my_compatibility(1:2,1:ns,s1,n)) >= thresholdValue) & ! MD: rather check below threshold?
my_compatibility(1:2,1:ns,s1,n) = sign((1.0_pReal - my_compatibilitySum) &
/ nThresholdValues, my_compatibility(1:2,1:ns,s1,n))
my_compatibilitySum = my_compatibilitySum + nThresholdValues * thresholdValue
enddo
where (belowThreshold(1:ns)) my_compatibility(1,1:ns,s1,n) = 0.0_pReal
where (belowThreshold(1:ns)) my_compatibility(2,1:ns,s1,n) = 0.0_pReal
enddo mySlipSystems
endif
enddo neighbors
compatibility(1:2,1:ns,1:ns,1:Nneighbors,i,e) = my_compatibility
end associate
end subroutine plastic_nonlocal_updateCompatibility
!--------------------------------------------------------------------------------------------------
!> @brief return array of constitutive results
!--------------------------------------------------------------------------------------------------
function plastic_nonlocal_postResults(ph,instance,of) result(postResults)
use prec, only: &
dNeq0
use material, only: &
plasticState
implicit none
integer, intent(in) :: &
ph, &
instance, &
of
real(pReal), dimension(sum(plastic_nonlocal_sizePostResult(:,instance))) :: &
postResults
integer :: &
ns, & !< short notation for the total number of active slip systems
c, & !< character of dislocation
cs, & !< constitutive result index
o, & !< index of current output
t, & !< type of dislocation
s !< index of my current slip system
real(pReal), dimension(param(instance)%totalNslip,8) :: &
rhoSgl, &
rhoDotSgl !< evolution rate of single dislocation densities (positive/negative screw and edge without dipoles)
real(pReal), dimension(param(instance)%totalNslip,4) :: &
gdot, & !< shear rates
v !< velocities
real(pReal), dimension(param(instance)%totalNslip,2) :: &
rhoDotDip !< evolution rate of dipole dislocation densities (screw and edge dipoles)
ns = param(instance)%totalNslip
cs = 0
associate(prm => param(instance),dst => microstructure(instance),stt=>state(instance),dot => dotState(instance))
forall (s = 1:ns, t = 1:4)
rhoSgl(s,t+4) = plasticState(ph)%State(iRhoB(s,t,instance),of)
v(s,t) = plasticState(ph)%State(iV(s,t,instance),of)
rhoDotSgl(s,t+4) = plasticState(ph)%dotState(iRhoB(s,t,instance),of)
endforall
forall (s = 1:ns, c = 1:2)
rhoDotDip(s,c) = plasticState(ph)%dotState(iRhoD(s,c,instance),of)
endforall
!* Calculate shear rate
forall (t = 1:4) &
gdot(1:ns,t) = rhoSgl(1:ns,t) * prm%burgers(1:ns) * v(1:ns,t)
!* calculate limits for stable dipole height
outputsLoop: do o = 1,size(param(instance)%outputID)
select case(param(instance)%outputID(o))
case (rho_sgl_mob_edg_pos_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_mob_edg_pos(:,of)
cs = cs + ns
case (rho_sgl_imm_edg_pos_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_imm_edg_pos(:,of)
cs = cs + ns
case (rho_sgl_mob_edg_neg_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_mob_edg_neg(:,of)
cs = cs + ns
case (rho_sgl_imm_edg_neg_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_imm_edg_neg(:,of)
cs = cs + ns
case (rho_dip_edg_ID)
postResults(cs+1:cs+ns) = stt%rho_dip_edg(:,of)
cs = cs + ns
case (rho_sgl_mob_scr_pos_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_mob_scr_pos(:,of)
cs = cs + ns
case (rho_sgl_imm_scr_pos_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_imm_scr_pos(:,of)
cs = cs + ns
case (rho_sgl_mob_scr_neg_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_mob_scr_neg(:,of)
cs = cs + ns
case (rho_sgl_imm_scr_neg_ID)
postResults(cs+1:cs+ns) = stt%rho_sgl_imm_scr_neg(:,of)
cs = cs + ns
case (rho_dip_scr_ID)
postResults(cs+1:cs+ns) = stt%rho_dip_scr(:,of)
cs = cs + ns
case (rho_forest_ID)
postResults(cs+1:cs+ns) = stt%rho_forest(:,of)
cs = cs + ns
case (shearrate_ID)
postResults(cs+1:cs+ns) = sum(gdot,2)
cs = cs + ns
case (resolvedstress_back_ID)
postResults(cs+1:cs+ns) = dst%tau_back(:,of)
cs = cs + ns
case (resistance_ID)
postResults(cs+1:cs+ns) = dst%tau_Threshold(:,of)
cs = cs + ns
case (rho_dot_sgl_ID)
postResults(cs+1:cs+ns) = sum(rhoDotSgl(1:ns,1:4),2) &
+ sum(rhoDotSgl(1:ns,5:8)*sign(1.0_pReal,rhoSgl(1:ns,5:8)),2)
cs = cs + ns
case (rho_dot_sgl_mobile_ID)
postResults(cs+1:cs+ns) = sum(rhoDotSgl(1:ns,1:4),2)
cs = cs + ns
case (rho_dot_dip_ID)
postResults(cs+1:cs+ns) = sum(rhoDotDip,2)
cs = cs + ns
case (rho_dot_gen_edge_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotMultiplication(1:ns,1,of)
cs = cs + ns
case (rho_dot_gen_screw_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotMultiplication(1:ns,2,of)
cs = cs + ns
case (rho_dot_sgl2dip_edge_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotSingle2DipoleGlide(1:ns,1,of)
cs = cs + ns
case (rho_dot_sgl2dip_screw_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotSingle2DipoleGlide(1:ns,2,of)
cs = cs + ns
case (rho_dot_ann_ath_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotAthermalAnnihilation(1:ns,1,of) &
+ results(instance)%rhoDotAthermalAnnihilation(1:ns,2,of)
cs = cs + ns
case (rho_dot_ann_the_edge_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotThermalAnnihilation(1:ns,1,of)
cs = cs + ns
case (rho_dot_ann_the_screw_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotThermalAnnihilation(1:ns,2,of)
cs = cs + ns
case (rho_dot_edgejogs_ID)
postResults(cs+1:cs+ns) = results(instance)%rhoDotEdgeJogs(1:ns,of)
cs = cs + ns
case (rho_dot_flux_mobile_ID)
postResults(cs+1:cs+ns) = sum(results(instance)%rhoDotFlux(1:ns,1:4,of),2)
cs = cs + ns
case (rho_dot_flux_edge_ID)
postResults(cs+1:cs+ns) = sum(results(instance)%rhoDotFlux(1:ns,1:2,of),2) &
+ sum(results(instance)%rhoDotFlux(1:ns,5:6,of)*sign(1.0_pReal,rhoSgl(1:ns,5:6)),2)
cs = cs + ns
case (rho_dot_flux_screw_ID)
postResults(cs+1:cs+ns) = sum(results(instance)%rhoDotFlux(1:ns,3:4,of),2) &
+ sum(results(instance)%rhoDotFlux(1:ns,7:8,of)*sign(1.0_pReal,rhoSgl(1:ns,7:8)),2)
cs = cs + ns
case (velocity_edge_pos_ID)
postResults(cs+1:cs+ns) = v(1:ns,1)
cs = cs + ns
case (velocity_edge_neg_ID)
postResults(cs+1:cs+ns) = v(1:ns,2)
cs = cs + ns
case (velocity_screw_pos_ID)
postResults(cs+1:cs+ns) = v(1:ns,3)
cs = cs + ns
case (velocity_screw_neg_ID)
postResults(cs+1:cs+ns) = v(1:ns,4)
cs = cs + ns
case(accumulatedshear_ID)
postResults(cs+1:cs+ns) = stt%accumulatedshear(:,of)
cs = cs + ns
end select
enddo outputsLoop
end associate
end function plastic_nonlocal_postResults
!--------------------------------------------------------------------------------------------------
!> @brief returns copy of current dislocation densities from state
!> @details raw values is rectified
!--------------------------------------------------------------------------------------------------
function getRho(instance,of,ip,el)
use mesh
implicit none
integer, intent(in) :: instance, of,ip,el
real(pReal), dimension(param(instance)%totalNslip,10) :: getRho
associate(prm => param(instance))
getRho = reshape(state(instance)%rho(:,of),[prm%totalNslip,10])
! ensure mobile densities (not for imm, they have a sign)
getRho(:,mob) = max(getRho(:,mob),0.0_pReal)
getRho(:,dip) = max(getRho(:,dip),0.0_pReal)
where(abs(getRho) < max(prm%significantN/mesh_ipVolume(ip,el)**(2.0_pReal/3.0_pReal),prm%significantRho)) &
getRho = 0.0_pReal
end associate
end function getRho
!--------------------------------------------------------------------------------------------------
!> @brief writes results to HDF5 output file
!--------------------------------------------------------------------------------------------------
subroutine plastic_nonlocal_results(instance,group)
#if defined(PETSc) || defined(DAMASKHDF5)
use results
implicit none
integer, intent(in) :: instance
character(len=*) :: group
integer :: o
associate(prm => param(instance), stt => state(instance))
outputsLoop: do o = 1,size(prm%outputID)
select case(prm%outputID(o))
end select
enddo outputsLoop
end associate
#else
integer, intent(in) :: instance
character(len=*) :: group
#endif
end subroutine plastic_nonlocal_results
end module plastic_nonlocal