DAMASK_EICMD/code
Philip Eisenlohr 314adae1bb spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition.
example: ... time 1 incs 100 freq 10 will write output at times 0.0, 0.1, 0.2, ... , i.e., every ten increments only.
2011-06-15 17:48:14 +00:00
..
config * comments are now recognized by IO even when they do not appear at the beginning of the line 2011-05-30 09:09:19 +00:00
include new substructure with 'include' and 'config' directories 2011-05-11 16:38:45 +00:00
setup changed default to "no clean". if clean-up required, use '--clean' option! 2011-06-15 16:40:34 +00:00
CPFEM.f90 changed output/debug-level relation for two statements 2011-06-14 14:08:13 +00:00
DAMASK_abaqus_exp.f ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields 2011-05-24 15:57:59 +00:00
DAMASK_abaqus_std.f ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields 2011-05-24 15:57:59 +00:00
DAMASK_marc.f90 changed MPIE_NUM_THREADS to DAMASK_NUM_THREADS 2011-05-28 09:42:25 +00:00
DAMASK_spectral.f90 spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition. 2011-06-15 17:48:14 +00:00
DAMASK_spectral_interface.f90 renamed interface from "mpie_interface" to "DAMASK_interface" 2011-05-11 17:01:03 +00:00
DAMASK_spectral_single.f90 ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields 2011-05-24 15:57:59 +00:00
FEsolving.f90 reworked restarting for compatibility with abaqus (not yet fully working) 2011-05-28 09:44:43 +00:00
IO.f90 spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition. 2011-06-15 17:48:14 +00:00
constitutive.f90 max size of crystallite result is now based on actual use within the mesh, not just picking the largest chunk from the material.config file... 2011-06-08 09:16:48 +00:00
constitutive_dislotwin.f90 sorry, last version did not compile. now with correct encoding. 2011-04-13 11:51:46 +00:00
constitutive_j2.f90 removed unused variables 2011-04-13 14:16:22 +00:00
constitutive_nonlocal.f90 dead dislocations now exert a backstress on their "home" MP 2011-05-26 09:35:42 +00:00
constitutive_phenopowerlaw.f90 removed unused variables 2011-04-13 14:16:22 +00:00
constitutive_titanmod.f90 removed unused variables 2011-04-13 14:16:22 +00:00
crystallite.f90 max size of crystallite result is now based on actual use within the mesh, not just picking the largest chunk from the material.config file... 2011-06-08 09:16:48 +00:00
debug.f90 changed internal debug verbosity in accord with debug.config listing. 2011-06-06 15:27:35 +00:00
homogenization.f90 changed internal debug verbosity in accord with debug.config listing. 2011-06-06 15:27:35 +00:00
homogenization_RGC.f90 changed internal debug verbosity in accord with debug.config listing. 2011-06-06 15:27:35 +00:00
homogenization_isostrain.f90 removed unused variables 2011-04-13 14:16:22 +00:00
lattice.f90 removed unused variables 2011-04-13 14:16:22 +00:00
makefile new substructure with 'include' and 'config' directories 2011-05-11 16:38:45 +00:00
material.f90 reworked restarting for compatibility with abaqus (not yet fully working) 2011-05-28 09:44:43 +00:00
math.f90 sorry, dangling "endif"... 2011-06-14 14:35:55 +00:00
mesh.f90 max size of crystallite result is now based on actual use within the mesh, not just picking the largest chunk from the material.config file... 2011-06-08 09:16:48 +00:00
mpie_spectral2d.f90 renamed interface from "mpie_interface" to "DAMASK_interface" 2011-05-11 17:01:03 +00:00
numerics.config * now able to choose method for state integration (integrator and integratorStiffness in numerics.config); standard is "Fixed Point Iteration", which is basically the same as before; others available are "Explicit Euler", "AdaptiveEuler", "Classical Runge-Kutta" and "Runge-Kutta Cash-Karp" 2010-10-01 12:18:49 +00:00
numerics.f90 changed MPIE_NUM_THREADS to DAMASK_NUM_THREADS 2011-05-28 09:42:25 +00:00
prec.f90 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
prec_single.f90 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
todo.txt Abaqus interfaces dapted to newest version of the rest of the code 2011-03-07 12:49:27 +00:00