84 lines
6.6 KiB
YAML
84 lines
6.6 KiB
YAML
# Available numerical parameters
|
|
# Case sensitive keys
|
|
|
|
homogenization:
|
|
mech:
|
|
RGC:
|
|
atol: 1.0e+4 # absolute tolerance of RGC residuum (in Pa)
|
|
rtol: 1.0e-3 # relative ...
|
|
amax: 1.0e+10 # absolute upper-limit of RGC residuum (in Pa)
|
|
rmax: 1.0e+2 # relative ...
|
|
perturbpenalty: 1.0e-7 # perturbation for computing penalty tangent
|
|
relevantmismatch: 1.0e-5 # minimum threshold of mismatch
|
|
viscositypower: 1.0e+0 # power (sensitivity rate) of numerical viscosity in RGC scheme
|
|
viscositymodulus: 0.0e+0 # stress modulus of RGC numerical viscosity (zero = without numerical viscosity)
|
|
# suggestion: larger than the aTol_RGC but still far below the expected flow stress of material
|
|
refrelaxationrate: 1.0e-3 # reference rate of relaxation (about the same magnitude as straining rate, possibly a bit higher)
|
|
maxrelaxationrate: 1.0e+0 # threshold of maximum relaxation vector increment (if exceed this then cutback)
|
|
maxvoldiscrepancy: 1.0e-5 # maximum allowable relative volume discrepancy
|
|
voldiscrepancymod: 1.0e+12
|
|
discrepancypower: 5.0
|
|
|
|
generic:
|
|
subStepMin: 1.0e-3 # minimum (relative) size of sub-step allowed during cutback in homogenization
|
|
subStepSize: 0.25 # size of substep when cutback introduced in homogenization (value between 0 and 1)
|
|
stepIncrease: 1.5 # increase of next substep size when previous substep converged in homogenization (value higher than 1)
|
|
nMPstate: 10 # materialpoint state loop limit
|
|
|
|
grid:
|
|
eps_div_atol: 1.0e-3 # absolute tolerance for fulfillment of stress equilibrium
|
|
eps_div_rtol: 5.0e-4 # relative tolerance for fulfillment of stress equilibrium
|
|
eps_curl_atol: 1.0e-12 # absolute tolerance for fulfillment of strain compatibility
|
|
eps_curl_rtol: 5.0e-4 # relative tolerance for fulfillment of strain compatibility
|
|
eps_stress_atol: 1.0e+3 # absolute tolerance for fulfillment of stress BC
|
|
eps_stress_rtol: 0.01 # relative tolerance for fulfillment of stress BC
|
|
eps_damage_atol: 1.0e-2 # absolute tolerance for damage evolution
|
|
eps_damage_rtol: 1.0e-6 # relative tolerance for damage evolution
|
|
eps_thermal_atol: 1.0e-2 # absolute tolerance for thermal equilibrium
|
|
eps_thermal_rtol: 1.0e-6 # relative tolerance for thermal equilibrium
|
|
itmax: 250 # Maximum iteration number
|
|
itmin: 2 # Minimum iteration number
|
|
fftw_timelimit: -1.0 # timelimit of plan creation for FFTW, see manual on www.fftw.org, Default -1.0: disable timelimit
|
|
fftw_plan_mode: FFTW_PATIENT # reads the planing-rigor flag, see manual on www.fftw.org, Default FFTW_PATIENT: use patient planner flag
|
|
maxCutBack: 3 # maximum cut back level (0: 1, 1: 0.5, 2: 0.25, etc)
|
|
maxStaggeredIter: 10 # max number of field level staggered iterations
|
|
memory_efficient: 1 # Precalculate Gamma-operator (81 double per point)
|
|
update_gamma: false # Update Gamma-operator with current dPdF (not possible if memory_efficient=1)
|
|
divergence_correction: 2 # Use size-independent divergence criterion
|
|
derivative: continuous # Approximation used for derivatives in Fourier space
|
|
petsc_options: -snes_type ngmres -snes_ngmres_anderson # PetSc solver options
|
|
alpha: 1.0 # polarization scheme parameter 0.0 < alpha < 2.0. alpha = 1.0 ==> AL scheme, alpha = 2.0 ==> accelerated scheme
|
|
beta: 1.0 # polarization scheme parameter 0.0 < beta < 2.0. beta = 1.0 ==> AL scheme, beta = 2.0 ==> accelerated scheme
|
|
|
|
mesh:
|
|
maxCutBack: 3 # maximum cut back level (0: 1, 1: 0.5, 2: 0.25, etc)
|
|
maxStaggeredIter: 10 # max number of field level staggered iterations
|
|
structorder: 2 # order of displacement shape functions (when mesh is defined)
|
|
bbarstabilisation: false
|
|
integrationorder: 2 # order of quadrature rule required (when mesh is defined)
|
|
itmax: 250 # Maximum iteration number
|
|
itmin: 2 # Minimum iteration number
|
|
eps_struct_atol: 1.0e-10 # absolute tolerance for mechanical equilibrium
|
|
eps_struct_rtol: 1.0e-4 # relative tolerance for mechanical equilibrium
|
|
|
|
crystallite:
|
|
subStepMin: 1.0e-3 # minimum (relative) size of sub-step allowed during cutback in crystallite
|
|
subStepSize: 0.25 # size of substep when cutback introduced in crystallite (value between 0 and 1)
|
|
stepIncrease: 1.5 # increase of next substep size when previous substep converged in crystallite (value higher than 1)
|
|
subStepSizeLp: 0.5 # size of first substep when cutback in Lp calculation
|
|
subStepSizeLi: 0.5 # size of first substep when cutback in Li calculation
|
|
nState: 10 # state loop limit
|
|
nStress: 40 # stress loop limit
|
|
rtol_State: 1.0e-6 # relative tolerance in crystallite state loop (abs tol provided by constitutive law)
|
|
rtol_Stress: 1.0e-6 # relative tolerance in crystallite stress loop (Lp residuum)
|
|
atol_Stress: 1.0e-8 # absolute tolerance in crystallite stress loop (Lp residuum!)
|
|
integrator: FPI # integration method (FPI = Fixed Point Iteration, Euler = Euler, AdaptiveEuler = Adaptive Euler, RK4 = classical 4th order Runge-Kutta, RKCK45 = 5th order Runge-Kutta Cash-Karp)
|
|
iJacoLpresiduum: 1 # frequency of Jacobian update of residuum in Lp
|
|
|
|
commercialFEM:
|
|
unitlength: 1 # physical length of one computational length unit
|
|
|
|
generic:
|
|
random_seed: 0 # fixed seeding for pseudo-random number generator, Default 0: use random seed.
|
|
phi_min: 1.0e-6 # non-zero residual damage.
|