!-------------------------------------------------------------------------------------------------- !> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH !> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH !> @author Christoph Koords, Max-Planck-Institut für Eisenforschung GmbH !> @author Martin Diehl, Max-Planck-Institut für Eisenforschung GmbH !> @brief Sets up the mesh for the solvers MSC.Marc, Abaqus and the spectral solver !-------------------------------------------------------------------------------------------------- module mesh use, intrinsic :: iso_c_binding use prec, only: pReal, pInt use mesh_base implicit none private integer(pInt), public, protected :: & mesh_NcpElems, & !< total number of CP elements in local mesh mesh_elemType, & !< Element type of the mesh (only support homogeneous meshes) mesh_Nnodes, & !< total number of nodes in mesh mesh_Ncellnodes, & !< total number of cell nodes in mesh (including duplicates) mesh_Ncells, & !< total number of cells in mesh mesh_NipsPerElem, & !< number of IPs in per element mesh_NcellnodesPerElem, & !< number of cell nodes per element mesh_maxNipNeighbors, & !< max number of IP neighbors in any CP element mesh_maxNsharedElems !< max number of CP elements sharing a node !!!! BEGIN DEPRECATED !!!!! integer(pInt), public, protected :: & mesh_maxNips, & !< max number of IPs in any CP element mesh_maxNcellnodes !< max number of cell nodes in any CP element !!!! BEGIN DEPRECATED !!!!! integer(pInt), dimension(:), allocatable, public, protected :: & mesh_homogenizationAt, & !< homogenization ID of each element mesh_microstructureAt !< microstructure ID of each element integer(pInt), dimension(:,:), allocatable, public, protected :: & mesh_CPnodeID, & !< nodes forming an element mesh_element, & !DEPRECATED mesh_sharedElem, & !< entryCount and list of elements containing node mesh_nodeTwins !< node twins are surface nodes that lie exactly on opposite sides of the mesh (surfaces nodes with equal coordinate values in two dimensions) integer(pInt), dimension(:,:,:,:), allocatable, public, protected :: & mesh_ipNeighborhood !< 6 or less neighboring IPs as [element_num, IP_index, neighbor_index that points to me] real(pReal), public, protected :: & mesh_unitlength !< physical length of one unit in mesh real(pReal), dimension(:,:), allocatable, public :: & mesh_node, & !< node x,y,z coordinates (after deformation! ONLY FOR MARC!!!) mesh_cellnode !< cell node x,y,z coordinates (after deformation! ONLY FOR MARC!!!) real(pReal), dimension(:,:), allocatable, public, protected :: & mesh_ipVolume, & !< volume associated with IP (initially!) mesh_node0 !< node x,y,z coordinates (initially!) real(pReal), dimension(:,:,:), allocatable, public, protected :: & mesh_ipArea !< area of interface to neighboring IP (initially!) real(pReal), dimension(:,:,:), allocatable, public :: & mesh_ipCoordinates !< IP x,y,z coordinates (after deformation!) real(pReal),dimension(:,:,:,:), allocatable, public, protected :: & mesh_ipAreaNormal !< area normal of interface to neighboring IP (initially!) logical, dimension(3), public, protected :: mesh_periodicSurface !< flag indicating periodic outer surfaces (used for fluxes) integer(pInt), dimension(2), private :: & mesh_maxValStateVar = 0_pInt integer(pInt), dimension(:,:), allocatable, private :: & mesh_cellnodeParent !< cellnode's parent element ID, cellnode's intra-element ID integer(pInt),dimension(:,:,:), allocatable, private :: & mesh_cell !< cell connectivity for each element,ip/cell integer(pInt), dimension(:,:,:), allocatable, private :: & FE_nodesAtIP, & !< map IP index to node indices in a specific type of element FE_ipNeighbor, & !< +x,-x,+y,-y,+z,-z list of intra-element IPs and(negative) neighbor faces per own IP in a specific type of element FE_cell, & !< list of intra-element cell node IDs that constitute the cells in a specific type of element geometry FE_cellface !< list of intra-cell cell node IDs that constitute the cell faces of a specific type of cell real(pReal), dimension(:,:,:), allocatable, private :: & FE_cellnodeParentnodeWeights !< list of node weights for the generation of cell nodes integer(pInt), dimension(:,:,:,:), allocatable, private :: & FE_subNodeOnIPFace ! These definitions should actually reside in the FE-solver specific part (different for MARC/ABAQUS) ! Hence, I suggest to prefix with "FE_" integer(pInt), parameter, public :: & FE_Nelemtypes = 13_pInt, & FE_Ngeomtypes = 10_pInt, & FE_Ncelltypes = 4_pInt, & FE_maxNnodes = 20_pInt, & FE_maxNips = 27_pInt, & FE_maxNipNeighbors = 6_pInt, & FE_maxmaxNnodesAtIP = 8_pInt, & !< max number of (equivalent) nodes attached to an IP FE_maxNmatchingNodesPerFace = 4_pInt, & FE_maxNfaces = 6_pInt, & FE_maxNcellnodes = 64_pInt, & FE_maxNcellnodesPerCell = 8_pInt, & FE_maxNcellfaces = 6_pInt, & FE_maxNcellnodesPerCellface = 4_pInt integer(pInt), dimension(FE_Nelemtypes), parameter, public :: FE_geomtype = & !< geometry type of particular element type int([ & 1, & ! element 6 (2D 3node 1ip) 2, & ! element 125 (2D 6node 3ip) 3, & ! element 11 (2D 4node 4ip) 4, & ! element 27 (2D 8node 9ip) 3, & ! element 54 (2D 8node 4ip) 5, & ! element 134 (3D 4node 1ip) 6, & ! element 157 (3D 5node 4ip) 6, & ! element 127 (3D 10node 4ip) 7, & ! element 136 (3D 6node 6ip) 8, & ! element 117 (3D 8node 1ip) 9, & ! element 7 (3D 8node 8ip) 9, & ! element 57 (3D 20node 8ip) 10 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, public :: FE_celltype = & !< cell type that is used by each geometry type int([ & 1, & ! element 6 (2D 3node 1ip) 2, & ! element 125 (2D 6node 3ip) 2, & ! element 11 (2D 4node 4ip) 2, & ! element 27 (2D 8node 9ip) 3, & ! element 134 (3D 4node 1ip) 4, & ! element 127 (3D 10node 4ip) 4, & ! element 136 (3D 6node 6ip) 4, & ! element 117 (3D 8node 1ip) 4, & ! element 7 (3D 8node 8ip) 4 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, public :: FE_dimension = & !< dimension of geometry type int([ & 2, & ! element 6 (2D 3node 1ip) 2, & ! element 125 (2D 6node 3ip) 2, & ! element 11 (2D 4node 4ip) 2, & ! element 27 (2D 8node 9ip) 3, & ! element 134 (3D 4node 1ip) 3, & ! element 127 (3D 10node 4ip) 3, & ! element 136 (3D 6node 6ip) 3, & ! element 117 (3D 8node 1ip) 3, & ! element 7 (3D 8node 8ip) 3 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Nelemtypes), parameter, public :: FE_Nnodes = & !< number of nodes that constitute a specific type of element int([ & 3, & ! element 6 (2D 3node 1ip) 6, & ! element 125 (2D 6node 3ip) 4, & ! element 11 (2D 4node 4ip) 8, & ! element 27 (2D 8node 9ip) 8, & ! element 54 (2D 8node 4ip) 4, & ! element 134 (3D 4node 1ip) 5, & ! element 157 (3D 5node 4ip) 10, & ! element 127 (3D 10node 4ip) 6, & ! element 136 (3D 6node 6ip) 8, & ! element 117 (3D 8node 1ip) 8, & ! element 7 (3D 8node 8ip) 20, & ! element 57 (3D 20node 8ip) 20 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, public :: FE_Nfaces = & !< number of faces of a specific type of element geometry int([ & 3, & ! element 6 (2D 3node 1ip) 3, & ! element 125 (2D 6node 3ip) 4, & ! element 11 (2D 4node 4ip) 4, & ! element 27 (2D 8node 9ip) 4, & ! element 134 (3D 4node 1ip) 4, & ! element 127 (3D 10node 4ip) 5, & ! element 136 (3D 6node 6ip) 6, & ! element 117 (3D 8node 1ip) 6, & ! element 7 (3D 8node 8ip) 6 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, private :: FE_NmatchingNodes = & !< number of nodes that are needed for face matching in a specific type of element geometry int([ & 3, & ! element 6 (2D 3node 1ip) 3, & ! element 125 (2D 6node 3ip) 4, & ! element 11 (2D 4node 4ip) 4, & ! element 27 (2D 8node 9ip) 4, & ! element 134 (3D 4node 1ip) 4, & ! element 127 (3D 10node 4ip) 6, & ! element 136 (3D 6node 6ip) 8, & ! element 117 (3D 8node 1ip) 8, & ! element 7 (3D 8node 8ip) 8 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_maxNfaces,FE_Ngeomtypes), parameter, private :: & FE_NmatchingNodesPerFace = & !< number of matching nodes per face in a specific type of element geometry reshape(int([ & 2,2,2,0,0,0, & ! element 6 (2D 3node 1ip) 2,2,2,0,0,0, & ! element 125 (2D 6node 3ip) 2,2,2,2,0,0, & ! element 11 (2D 4node 4ip) 2,2,2,2,0,0, & ! element 27 (2D 8node 9ip) 3,3,3,3,0,0, & ! element 134 (3D 4node 1ip) 3,3,3,3,0,0, & ! element 127 (3D 10node 4ip) 3,4,4,4,3,0, & ! element 136 (3D 6node 6ip) 4,4,4,4,4,4, & ! element 117 (3D 8node 1ip) 4,4,4,4,4,4, & ! element 7 (3D 8node 8ip) 4,4,4,4,4,4 & ! element 21 (3D 20node 27ip) ],pInt),[FE_maxNipNeighbors,FE_Ngeomtypes]) integer(pInt), dimension(FE_maxNmatchingNodesPerFace,FE_maxNfaces,FE_Ngeomtypes), & parameter, private :: FE_face = & !< List of node indices on each face of a specific type of element geometry reshape(int([& 1,2,0,0 , & ! element 6 (2D 3node 1ip) 2,3,0,0 , & 3,1,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,0,0 , & ! element 125 (2D 6node 3ip) 2,3,0,0 , & 3,1,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,0,0 , & ! element 11 (2D 4node 4ip) 2,3,0,0 , & 3,4,0,0 , & 4,1,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,0,0 , & ! element 27 (2D 8node 9ip) 2,3,0,0 , & 3,4,0,0 , & 4,1,0,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,3,0 , & ! element 134 (3D 4node 1ip) 1,4,2,0 , & 2,3,4,0 , & 1,3,4,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,3,0 , & ! element 127 (3D 10node 4ip) 1,4,2,0 , & 2,4,3,0 , & 1,3,4,0 , & 0,0,0,0 , & 0,0,0,0 , & 1,2,3,0 , & ! element 136 (3D 6node 6ip) 1,4,5,2 , & 2,5,6,3 , & 1,3,6,4 , & 4,6,5,0 , & 0,0,0,0 , & 1,2,3,4 , & ! element 117 (3D 8node 1ip) 2,1,5,6 , & 3,2,6,7 , & 4,3,7,8 , & 4,1,5,8 , & 8,7,6,5 , & 1,2,3,4 , & ! element 7 (3D 8node 8ip) 2,1,5,6 , & 3,2,6,7 , & 4,3,7,8 , & 4,1,5,8 , & 8,7,6,5 , & 1,2,3,4 , & ! element 21 (3D 20node 27ip) 2,1,5,6 , & 3,2,6,7 , & 4,3,7,8 , & 4,1,5,8 , & 8,7,6,5 & ],pInt),[FE_maxNmatchingNodesPerFace,FE_maxNfaces,FE_Ngeomtypes]) integer(pInt), dimension(FE_Ngeomtypes), parameter, private :: FE_Ncellnodes = & !< number of cell nodes in a specific geometry type int([ & 3, & ! element 6 (2D 3node 1ip) 7, & ! element 125 (2D 6node 3ip) 9, & ! element 11 (2D 4node 4ip) 16, & ! element 27 (2D 8node 9ip) 4, & ! element 134 (3D 4node 1ip) 15, & ! element 127 (3D 10node 4ip) 21, & ! element 136 (3D 6node 6ip) 8, & ! element 117 (3D 8node 1ip) 27, & ! element 7 (3D 8node 8ip) 64 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ncelltypes), parameter, private :: FE_NcellnodesPerCell = & !< number of cell nodes in a specific cell type int([ & 3, & ! (2D 3node) 4, & ! (2D 4node) 4, & ! (3D 4node) 8 & ! (3D 8node) ],pInt) integer(pInt), dimension(FE_Ncelltypes), parameter, private :: FE_NcellnodesPerCellface = & !< number of cell nodes per cell face in a specific cell type int([& 2, & ! (2D 3node) 2, & ! (2D 4node) 3, & ! (3D 4node) 4 & ! (3D 8node) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, public :: FE_Nips = & !< number of IPs in a specific type of element int([ & 1, & ! element 6 (2D 3node 1ip) 3, & ! element 125 (2D 6node 3ip) 4, & ! element 11 (2D 4node 4ip) 9, & ! element 27 (2D 8node 9ip) 1, & ! element 134 (3D 4node 1ip) 4, & ! element 127 (3D 10node 4ip) 6, & ! element 136 (3D 6node 6ip) 1, & ! element 117 (3D 8node 1ip) 8, & ! element 7 (3D 8node 8ip) 27 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(FE_Ncelltypes), parameter, public :: FE_NipNeighbors = & !< number of ip neighbors / cell faces in a specific cell type int([& 3, & ! (2D 3node) 4, & ! (2D 4node) 4, & ! (3D 4node) 6 & ! (3D 8node) ],pInt) integer(pInt), dimension(FE_Ngeomtypes), parameter, private :: FE_maxNnodesAtIP = & !< maximum number of parent nodes that belong to an IP for a specific type of element int([ & 3, & ! element 6 (2D 3node 1ip) 1, & ! element 125 (2D 6node 3ip) 1, & ! element 11 (2D 4node 4ip) 2, & ! element 27 (2D 8node 9ip) 4, & ! element 134 (3D 4node 1ip) 1, & ! element 127 (3D 10node 4ip) 1, & ! element 136 (3D 6node 6ip) 8, & ! element 117 (3D 8node 1ip) 1, & ! element 7 (3D 8node 8ip) 4 & ! element 21 (3D 20node 27ip) ],pInt) integer(pInt), dimension(3), public, protected :: & grid !< (global) grid integer(pInt), public, protected :: & mesh_NcpElemsGlobal, & !< total number of CP elements in global mesh grid3, & !< (local) grid in 3rd direction grid3Offset !< (local) grid offset in 3rd direction real(pReal), dimension(3), public, protected :: & geomSize real(pReal), public, protected :: & size3, & !< (local) size in 3rd direction size3offset !< (local) size offset in 3rd direction public :: & mesh_init, & mesh_build_cellnodes, & mesh_build_ipVolumes, & mesh_build_ipCoordinates, & mesh_cellCenterCoordinates, & mesh_get_Ncellnodes, & mesh_get_unitlength, & mesh_get_nodeAtIP, & mesh_spectral_getGrid, & mesh_spectral_getSize private :: & mesh_get_damaskOptions, & mesh_build_cellconnectivity, & mesh_build_ipAreas, & mesh_faceMatch, & mesh_build_FEdata, & mesh_spectral_getHomogenization, & mesh_spectral_count, & mesh_spectral_count_cpSizes, & mesh_spectral_build_nodes, & mesh_spectral_build_elements, & mesh_spectral_build_ipNeighborhood type, public, extends(tMesh) :: tMesh_grid integer(pInt), dimension(3), public :: & grid !< (global) grid integer(pInt), public :: & mesh_NcpElemsGlobal, & !< total number of CP elements in global mesh grid3, & !< (local) grid in 3rd direction grid3Offset !< (local) grid offset in 3rd direction real(pReal), dimension(3), public :: & geomSize real(pReal), public :: & size3, & !< (local) size in 3rd direction size3offset contains procedure :: init => tMesh_grid_init end type tMesh_grid type(tMesh_grid), public, protected :: theMesh contains subroutine tMesh_grid_init(self) implicit none class(tMesh_grid) :: self call self%elem%init(10_pInt) end subroutine tMesh_grid_init !-------------------------------------------------------------------------------------------------- !> @brief initializes the mesh by calling all necessary private routines the mesh module !! Order and routines strongly depend on type of solver !-------------------------------------------------------------------------------------------------- subroutine mesh_init(ip,el) #if defined(__GFORTRAN__) || __INTEL_COMPILER >= 1800 use, intrinsic :: iso_fortran_env, only: & compiler_version, & compiler_options #endif #include use PETScsys use DAMASK_interface use IO, only: & IO_open_file, & IO_error, & IO_timeStamp, & IO_error, & IO_write_jobFile use debug, only: & debug_e, & debug_i, & debug_level, & debug_mesh, & debug_levelBasic use numerics, only: & usePingPong, & numerics_unitlength, & worldrank use FEsolving, only: & FEsolving_execElem, & FEsolving_execIP implicit none include 'fftw3-mpi.f03' integer(C_INTPTR_T) :: devNull, local_K, local_K_offset integer :: ierr, worldsize integer(pInt), parameter :: FILEUNIT = 222_pInt integer(pInt), intent(in), optional :: el, ip integer(pInt) :: j logical :: myDebug write(6,'(/,a)') ' <<<+- mesh init -+>>>' write(6,'(a15,a)') ' Current time: ',IO_timeStamp() #include "compilation_info.f90" call theMesh%init call mesh_build_FEdata ! get properties of the different types of elements mesh_unitlength = numerics_unitlength ! set physical extent of a length unit in mesh myDebug = (iand(debug_level(debug_mesh),debug_levelBasic) /= 0_pInt) call fftw_mpi_init() call IO_open_file(FILEUNIT,geometryFile) ! parse info from geometry file... if (myDebug) write(6,'(a)') ' Opened geometry file'; flush(6) grid = mesh_spectral_getGrid(fileUnit) call MPI_comm_size(PETSC_COMM_WORLD, worldsize, ierr) if(ierr /=0_pInt) call IO_error(894_pInt, ext_msg='MPI_comm_size') if(worldsize>grid(3)) call IO_error(894_pInt, ext_msg='number of processes exceeds grid(3)') geomSize = mesh_spectral_getSize(fileUnit) devNull = fftw_mpi_local_size_3d(int(grid(3),C_INTPTR_T), & int(grid(2),C_INTPTR_T), & int(grid(1),C_INTPTR_T)/2+1, & PETSC_COMM_WORLD, & local_K, & ! domain grid size along z local_K_offset) ! domain grid offset along z grid3 = int(local_K,pInt) grid3Offset = int(local_K_offset,pInt) size3 = geomSize(3)*real(grid3,pReal) /real(grid(3),pReal) size3Offset = geomSize(3)*real(grid3Offset,pReal)/real(grid(3),pReal) if (myDebug) write(6,'(a)') ' Grid partitioned'; flush(6) call mesh_spectral_count() if (myDebug) write(6,'(a)') ' Counted nodes/elements'; flush(6) call mesh_spectral_count_cpSizes if (myDebug) write(6,'(a)') ' Built CP statistics'; flush(6) call mesh_spectral_build_nodes() if (myDebug) write(6,'(a)') ' Built nodes'; flush(6) call mesh_spectral_build_elements(FILEUNIT) if (myDebug) write(6,'(a)') ' Built elements'; flush(6) call mesh_get_damaskOptions(FILEUNIT) if (myDebug) write(6,'(a)') ' Got DAMASK options'; flush(6) call mesh_build_cellconnectivity if (myDebug) write(6,'(a)') ' Built cell connectivity'; flush(6) mesh_cellnode = mesh_build_cellnodes(mesh_node,mesh_Ncellnodes) if (myDebug) write(6,'(a)') ' Built cell nodes'; flush(6) call mesh_build_ipCoordinates if (myDebug) write(6,'(a)') ' Built IP coordinates'; flush(6) call mesh_build_ipVolumes if (myDebug) write(6,'(a)') ' Built IP volumes'; flush(6) call mesh_build_ipAreas if (myDebug) write(6,'(a)') ' Built IP areas'; flush(6) close (FILEUNIT) call mesh_spectral_build_ipNeighborhood if (myDebug) write(6,'(a)') ' Built IP neighborhood'; flush(6) if (debug_e < 1 .or. debug_e > mesh_NcpElems) & call IO_error(602_pInt,ext_msg='element') ! selected element does not exist if (debug_i < 1 .or. debug_i > FE_Nips(FE_geomtype(mesh_element(2_pInt,debug_e)))) & call IO_error(602_pInt,ext_msg='IP') ! selected element does not have requested IP FEsolving_execElem = [ 1_pInt,mesh_NcpElems ] ! parallel loop bounds set to comprise all DAMASK elements allocate(FEsolving_execIP(2_pInt,mesh_NcpElems), source=1_pInt) ! parallel loop bounds set to comprise from first IP... forall (j = 1_pInt:mesh_NcpElems) FEsolving_execIP(2,j) = FE_Nips(FE_geomtype(mesh_element(2,j))) ! ...up to own IP count for each element !!!! COMPATIBILITY HACK !!!! ! for a homogeneous mesh, all elements have the same number of IPs and and cell nodes. ! hence, xxPerElem instead of maxXX mesh_NipsPerElem = mesh_maxNips mesh_NcellnodesPerElem = mesh_maxNcellnodes ! better name mesh_homogenizationAt = mesh_element(3,:) mesh_microstructureAt = mesh_element(4,:) mesh_CPnodeID = mesh_element(5:4+mesh_NipsPerElem,:) !!!!!!!!!!!!!!!!!!!!!!!! end subroutine mesh_init !-------------------------------------------------------------------------------------------------- !> @brief Split CP elements into cells. !> @details Build a mapping between cells and the corresponding cell nodes ('mesh_cell'). !> Cell nodes that are also matching nodes are unique in the list of cell nodes, !> all others (currently) might be stored more than once. !> Also allocates the 'mesh_node' array. !-------------------------------------------------------------------------------------------------- subroutine mesh_build_cellconnectivity implicit none integer(pInt), dimension(:), allocatable :: & matchingNode2cellnode integer(pInt), dimension(:,:), allocatable :: & cellnodeParent integer(pInt), dimension(mesh_maxNcellnodes) :: & localCellnode2globalCellnode integer(pInt) :: & e,t,g,c,n,i, & matchingNodeID, & localCellnodeID allocate(mesh_cell(FE_maxNcellnodesPerCell,mesh_maxNips,mesh_NcpElems), source=0_pInt) allocate(matchingNode2cellnode(mesh_Nnodes), source=0_pInt) allocate(cellnodeParent(2_pInt,mesh_maxNcellnodes*mesh_NcpElems), source=0_pInt) !-------------------------------------------------------------------------------------------------- ! Count cell nodes (including duplicates) and generate cell connectivity list mesh_Ncellnodes = 0_pInt mesh_Ncells = 0_pInt do e = 1_pInt,mesh_NcpElems ! loop over cpElems t = mesh_element(2_pInt,e) ! get element type g = FE_geomtype(t) ! get geometry type c = FE_celltype(g) ! get cell type localCellnode2globalCellnode = 0_pInt mesh_Ncells = mesh_Ncells + FE_Nips(g) do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element do n = 1_pInt,FE_NcellnodesPerCell(c) ! loop over cell nodes in this cell localCellnodeID = FE_cell(n,i,g) if (localCellnodeID <= FE_NmatchingNodes(g)) then ! this cell node is a matching node matchingNodeID = mesh_element(4_pInt+localCellnodeID,e) if (matchingNode2cellnode(matchingNodeID) == 0_pInt) then ! if this matching node does not yet exist in the glbal cell node list ... mesh_Ncellnodes = mesh_Ncellnodes + 1_pInt ! ... count it as cell node ... matchingNode2cellnode(matchingNodeID) = mesh_Ncellnodes ! ... and remember its global ID cellnodeParent(1_pInt,mesh_Ncellnodes) = e ! ... and where it belongs to cellnodeParent(2_pInt,mesh_Ncellnodes) = localCellnodeID endif mesh_cell(n,i,e) = matchingNode2cellnode(matchingNodeID) else ! this cell node is no matching node if (localCellnode2globalCellnode(localCellnodeID) == 0_pInt) then ! if this local cell node does not yet exist in the global cell node list ... mesh_Ncellnodes = mesh_Ncellnodes + 1_pInt ! ... count it as cell node ... localCellnode2globalCellnode(localCellnodeID) = mesh_Ncellnodes ! ... and remember its global ID ... cellnodeParent(1_pInt,mesh_Ncellnodes) = e ! ... and it belongs to cellnodeParent(2_pInt,mesh_Ncellnodes) = localCellnodeID endif mesh_cell(n,i,e) = localCellnode2globalCellnode(localCellnodeID) endif enddo enddo enddo allocate(mesh_cellnodeParent(2_pInt,mesh_Ncellnodes)) allocate(mesh_cellnode(3_pInt,mesh_Ncellnodes)) forall(n = 1_pInt:mesh_Ncellnodes) mesh_cellnodeParent(1,n) = cellnodeParent(1,n) mesh_cellnodeParent(2,n) = cellnodeParent(2,n) endforall end subroutine mesh_build_cellconnectivity !-------------------------------------------------------------------------------------------------- !> @brief Calculate position of cellnodes from the given position of nodes !> Build list of cellnodes' coordinates. !> Cellnode coordinates are calculated from a weighted sum of node coordinates. !-------------------------------------------------------------------------------------------------- function mesh_build_cellnodes(nodes,Ncellnodes) implicit none integer(pInt), intent(in) :: Ncellnodes !< requested number of cellnodes real(pReal), dimension(3,mesh_Nnodes), intent(in) :: nodes real(pReal), dimension(3,Ncellnodes) :: mesh_build_cellnodes integer(pInt) :: & e,t,n,m, & localCellnodeID real(pReal), dimension(3) :: & myCoords mesh_build_cellnodes = 0.0_pReal !$OMP PARALLEL DO PRIVATE(e,localCellnodeID,t,myCoords) do n = 1_pInt,Ncellnodes ! loop over cell nodes e = mesh_cellnodeParent(1,n) localCellnodeID = mesh_cellnodeParent(2,n) t = mesh_element(2,e) ! get element type myCoords = 0.0_pReal do m = 1_pInt,FE_Nnodes(t) myCoords = myCoords + nodes(1:3,mesh_element(4_pInt+m,e)) & * FE_cellnodeParentnodeWeights(m,localCellnodeID,t) enddo mesh_build_cellnodes(1:3,n) = myCoords / sum(FE_cellnodeParentnodeWeights(:,localCellnodeID,t)) enddo !$OMP END PARALLEL DO end function mesh_build_cellnodes !-------------------------------------------------------------------------------------------------- !> @brief Calculates IP volume. Allocates global array 'mesh_ipVolume' !> @details The IP volume is calculated differently depending on the cell type. !> 2D cells assume an element depth of one in order to calculate the volume. !> For the hexahedral cell we subdivide the cell into subvolumes of pyramidal !> shape with a cell face as basis and the central ip at the tip. This subvolume is !> calculated as an average of four tetrahedals with three corners on the cell face !> and one corner at the central ip. !-------------------------------------------------------------------------------------------------- subroutine mesh_build_ipVolumes use math, only: & math_volTetrahedron, & math_areaTriangle implicit none integer(pInt) :: e,t,g,c,i,m,f,n real(pReal), dimension(FE_maxNcellnodesPerCellface,FE_maxNcellfaces) :: subvolume if (.not. allocated(mesh_ipVolume)) then allocate(mesh_ipVolume(mesh_maxNips,mesh_NcpElems)) mesh_ipVolume = 0.0_pReal endif !$OMP PARALLEL DO PRIVATE(t,g,c,m,subvolume) do e = 1_pInt,mesh_NcpElems ! loop over cpElems t = mesh_element(2_pInt,e) ! get element type g = FE_geomtype(t) ! get geometry type c = FE_celltype(g) ! get cell type select case (c) case (1_pInt) ! 2D 3node forall (i = 1_pInt:FE_Nips(g)) & ! loop over ips=cells in this element mesh_ipVolume(i,e) = math_areaTriangle(mesh_cellnode(1:3,mesh_cell(1,i,e)), & mesh_cellnode(1:3,mesh_cell(2,i,e)), & mesh_cellnode(1:3,mesh_cell(3,i,e))) case (2_pInt) ! 2D 4node forall (i = 1_pInt:FE_Nips(g)) & ! loop over ips=cells in this element mesh_ipVolume(i,e) = math_areaTriangle(mesh_cellnode(1:3,mesh_cell(1,i,e)), & ! here we assume a planar shape, so division in two triangles suffices mesh_cellnode(1:3,mesh_cell(2,i,e)), & mesh_cellnode(1:3,mesh_cell(3,i,e))) & + math_areaTriangle(mesh_cellnode(1:3,mesh_cell(3,i,e)), & mesh_cellnode(1:3,mesh_cell(4,i,e)), & mesh_cellnode(1:3,mesh_cell(1,i,e))) case (3_pInt) ! 3D 4node forall (i = 1_pInt:FE_Nips(g)) & ! loop over ips=cells in this element mesh_ipVolume(i,e) = math_volTetrahedron(mesh_cellnode(1:3,mesh_cell(1,i,e)), & mesh_cellnode(1:3,mesh_cell(2,i,e)), & mesh_cellnode(1:3,mesh_cell(3,i,e)), & mesh_cellnode(1:3,mesh_cell(4,i,e))) case (4_pInt) ! 3D 8node m = FE_NcellnodesPerCellface(c) do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element subvolume = 0.0_pReal forall(f = 1_pInt:FE_NipNeighbors(c), n = 1_pInt:FE_NcellnodesPerCellface(c)) & subvolume(n,f) = math_volTetrahedron(& mesh_cellnode(1:3,mesh_cell(FE_cellface( n ,f,c),i,e)), & mesh_cellnode(1:3,mesh_cell(FE_cellface(1+mod(n ,m),f,c),i,e)), & mesh_cellnode(1:3,mesh_cell(FE_cellface(1+mod(n+1,m),f,c),i,e)), & mesh_ipCoordinates(1:3,i,e)) mesh_ipVolume(i,e) = 0.5_pReal * sum(subvolume) ! each subvolume is based on four tetrahedrons, altough the face consists of only two triangles -> averaging factor two enddo end select enddo !$OMP END PARALLEL DO end subroutine mesh_build_ipVolumes !-------------------------------------------------------------------------------------------------- !> @brief Calculates IP Coordinates. Allocates global array 'mesh_ipCoordinates' ! Called by all solvers in mesh_init in order to initialize the ip coordinates. ! Later on the current ip coordinates are directly prvided by the spectral solver and by Abaqus, ! so no need to use this subroutine anymore; Marc however only provides nodal displacements, ! so in this case the ip coordinates are always calculated on the basis of this subroutine. ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! FOR THE MOMENT THIS SUBROUTINE ACTUALLY CALCULATES THE CELL CENTER AND NOT THE IP COORDINATES, ! AS THE IP IS NOT (ALWAYS) LOCATED IN THE CENTER OF THE IP VOLUME. ! HAS TO BE CHANGED IN A LATER VERSION. ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !-------------------------------------------------------------------------------------------------- subroutine mesh_build_ipCoordinates implicit none integer(pInt) :: e,t,g,c,i,n real(pReal), dimension(3) :: myCoords if (.not. allocated(mesh_ipCoordinates)) & allocate(mesh_ipCoordinates(3,mesh_maxNips,mesh_NcpElems),source=0.0_pReal) !$OMP PARALLEL DO PRIVATE(t,g,c,myCoords) do e = 1_pInt,mesh_NcpElems ! loop over cpElems t = mesh_element(2_pInt,e) ! get element type g = FE_geomtype(t) ! get geometry type c = FE_celltype(g) ! get cell type do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element myCoords = 0.0_pReal do n = 1_pInt,FE_NcellnodesPerCell(c) ! loop over cell nodes in this cell myCoords = myCoords + mesh_cellnode(1:3,mesh_cell(n,i,e)) enddo mesh_ipCoordinates(1:3,i,e) = myCoords / real(FE_NcellnodesPerCell(c),pReal) enddo enddo !$OMP END PARALLEL DO end subroutine mesh_build_ipCoordinates !-------------------------------------------------------------------------------------------------- !> @brief Calculates cell center coordinates. !-------------------------------------------------------------------------------------------------- pure function mesh_cellCenterCoordinates(ip,el) implicit none integer(pInt), intent(in) :: el, & !< element number ip !< integration point number real(pReal), dimension(3) :: mesh_cellCenterCoordinates !< x,y,z coordinates of the cell center of the requested IP cell integer(pInt) :: t,g,c,n t = mesh_element(2_pInt,el) ! get element type g = FE_geomtype(t) ! get geometry type c = FE_celltype(g) ! get cell type mesh_cellCenterCoordinates = 0.0_pReal do n = 1_pInt,FE_NcellnodesPerCell(c) ! loop over cell nodes in this cell mesh_cellCenterCoordinates = mesh_cellCenterCoordinates + mesh_cellnode(1:3,mesh_cell(n,ip,el)) enddo mesh_cellCenterCoordinates = mesh_cellCenterCoordinates / real(FE_NcellnodesPerCell(c),pReal) end function mesh_cellCenterCoordinates !-------------------------------------------------------------------------------------------------- !> @brief Reads grid information from geometry file. If fileUnit is given, !! assumes an opened file, otherwise tries to open the one specified in geometryFile !-------------------------------------------------------------------------------------------------- function mesh_spectral_getGrid(fileUnit) use IO, only: & IO_checkAndRewind, & IO_open_file, & IO_stringPos, & IO_lc, & IO_stringValue, & IO_intValue, & IO_floatValue, & IO_error use DAMASK_interface, only: & geometryFile implicit none integer(pInt), dimension(3) :: mesh_spectral_getGrid integer(pInt), intent(in), optional :: fileUnit integer(pInt), allocatable, dimension(:) :: chunkPos integer(pInt) :: headerLength = 0_pInt character(len=1024) :: line, & keyword integer(pInt) :: i, j, myFileUnit logical :: gotGrid = .false. mesh_spectral_getGrid = -1_pInt if(.not. present(fileUnit)) then myFileUnit = 289_pInt call IO_open_file(myFileUnit,trim(geometryFile)) else myFileUnit = fileUnit endif call IO_checkAndRewind(myFileUnit) read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) keyword = IO_lc(IO_StringValue(line,chunkPos,2_pInt,.true.)) if (keyword(1:4) == 'head') then headerLength = IO_intValue(line,chunkPos,1_pInt) + 1_pInt else call IO_error(error_ID=841_pInt, ext_msg='mesh_spectral_getGrid') endif rewind(myFileUnit) do i = 1_pInt, headerLength read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) select case ( IO_lc(IO_StringValue(line,chunkPos,1_pInt,.true.)) ) case ('grid') gotGrid = .true. do j = 2_pInt,6_pInt,2_pInt select case (IO_lc(IO_stringValue(line,chunkPos,j))) case('a') mesh_spectral_getGrid(1) = IO_intValue(line,chunkPos,j+1_pInt) case('b') mesh_spectral_getGrid(2) = IO_intValue(line,chunkPos,j+1_pInt) case('c') mesh_spectral_getGrid(3) = IO_intValue(line,chunkPos,j+1_pInt) end select enddo end select enddo if(.not. present(fileUnit)) close(myFileUnit) if (.not. gotGrid) & call IO_error(error_ID = 845_pInt, ext_msg='grid') if(any(mesh_spectral_getGrid < 1_pInt)) & call IO_error(error_ID = 843_pInt, ext_msg='mesh_spectral_getGrid') end function mesh_spectral_getGrid !-------------------------------------------------------------------------------------------------- !> @brief Reads size information from geometry file. If fileUnit is given, !! assumes an opened file, otherwise tries to open the one specified in geometryFile !-------------------------------------------------------------------------------------------------- function mesh_spectral_getSize(fileUnit) use IO, only: & IO_checkAndRewind, & IO_open_file, & IO_stringPos, & IO_lc, & IO_stringValue, & IO_intValue, & IO_floatValue, & IO_error use DAMASK_interface, only: & geometryFile implicit none real(pReal), dimension(3) :: mesh_spectral_getSize integer(pInt), intent(in), optional :: fileUnit integer(pInt), allocatable, dimension(:) :: chunkPos integer(pInt) :: headerLength = 0_pInt character(len=1024) :: line, & keyword integer(pInt) :: i, j, myFileUnit logical :: gotSize = .false. mesh_spectral_getSize = -1.0_pReal if(.not. present(fileUnit)) then myFileUnit = 289_pInt call IO_open_file(myFileUnit,trim(geometryFile)) else myFileUnit = fileUnit endif call IO_checkAndRewind(myFileUnit) read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) keyword = IO_lc(IO_StringValue(line,chunkPos,2_pInt,.true.)) if (keyword(1:4) == 'head') then headerLength = IO_intValue(line,chunkPos,1_pInt) + 1_pInt else call IO_error(error_ID=841_pInt, ext_msg='mesh_spectral_getSize') endif rewind(myFileUnit) do i = 1_pInt, headerLength read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) select case ( IO_lc(IO_StringValue(line,chunkPos,1,.true.)) ) case ('size') gotSize = .true. do j = 2_pInt,6_pInt,2_pInt select case (IO_lc(IO_stringValue(line,chunkPos,j))) case('x') mesh_spectral_getSize(1) = IO_floatValue(line,chunkPos,j+1_pInt) case('y') mesh_spectral_getSize(2) = IO_floatValue(line,chunkPos,j+1_pInt) case('z') mesh_spectral_getSize(3) = IO_floatValue(line,chunkPos,j+1_pInt) end select enddo end select enddo if(.not. present(fileUnit)) close(myFileUnit) if (.not. gotSize) & call IO_error(error_ID = 845_pInt, ext_msg='size') if (any(mesh_spectral_getSize<=0.0_pReal)) & call IO_error(error_ID = 844_pInt, ext_msg='mesh_spectral_getSize') end function mesh_spectral_getSize !-------------------------------------------------------------------------------------------------- !> @brief Reads homogenization information from geometry file. If fileUnit is given, !! assumes an opened file, otherwise tries to open the one specified in geometryFile !-------------------------------------------------------------------------------------------------- integer(pInt) function mesh_spectral_getHomogenization(fileUnit) use IO, only: & IO_checkAndRewind, & IO_open_file, & IO_stringPos, & IO_lc, & IO_stringValue, & IO_intValue, & IO_error use DAMASK_interface, only: & geometryFile implicit none integer(pInt), intent(in), optional :: fileUnit integer(pInt), allocatable, dimension(:) :: chunkPos integer(pInt) :: headerLength = 0_pInt character(len=1024) :: line, & keyword integer(pInt) :: i, myFileUnit logical :: gotHomogenization = .false. mesh_spectral_getHomogenization = -1_pInt if(.not. present(fileUnit)) then myFileUnit = 289_pInt call IO_open_file(myFileUnit,trim(geometryFile)) else myFileUnit = fileUnit endif call IO_checkAndRewind(myFileUnit) read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) keyword = IO_lc(IO_StringValue(line,chunkPos,2_pInt,.true.)) if (keyword(1:4) == 'head') then headerLength = IO_intValue(line,chunkPos,1_pInt) + 1_pInt else call IO_error(error_ID=841_pInt, ext_msg='mesh_spectral_getHomogenization') endif rewind(myFileUnit) do i = 1_pInt, headerLength read(myFileUnit,'(a1024)') line chunkPos = IO_stringPos(line) select case ( IO_lc(IO_StringValue(line,chunkPos,1,.true.)) ) case ('homogenization') gotHomogenization = .true. mesh_spectral_getHomogenization = IO_intValue(line,chunkPos,2_pInt) end select enddo if(.not. present(fileUnit)) close(myFileUnit) if (.not. gotHomogenization ) & call IO_error(error_ID = 845_pInt, ext_msg='homogenization') if (mesh_spectral_getHomogenization<1_pInt) & call IO_error(error_ID = 842_pInt, ext_msg='mesh_spectral_getHomogenization') end function mesh_spectral_getHomogenization !-------------------------------------------------------------------------------------------------- !> @brief Count overall number of nodes and elements in mesh and stores them in !! 'mesh_Nelems', 'mesh_Nnodes' and 'mesh_NcpElems' !-------------------------------------------------------------------------------------------------- subroutine mesh_spectral_count() implicit none mesh_NcpElems= product(grid(1:2))*grid3 mesh_Nnodes = product(grid(1:2) + 1_pInt)*(grid3 + 1_pInt) mesh_NcpElemsGlobal = product(grid) end subroutine mesh_spectral_count !-------------------------------------------------------------------------------------------------- !> @brief Gets maximum count of nodes, IPs, IP neighbors, and subNodes among cpElements. !! Sets global values 'mesh_maxNips', 'mesh_maxNipNeighbors', !! and 'mesh_maxNcellnodes' !-------------------------------------------------------------------------------------------------- subroutine mesh_spectral_count_cpSizes implicit none integer(pInt) :: t,g,c t = 10_pInt g = FE_geomtype(t) c = FE_celltype(g) mesh_maxNips = FE_Nips(g) mesh_maxNipNeighbors = FE_NipNeighbors(c) mesh_maxNcellnodes = FE_Ncellnodes(g) end subroutine mesh_spectral_count_cpSizes !-------------------------------------------------------------------------------------------------- !> @brief Store x,y,z coordinates of all nodes in mesh. !! Allocates global arrays 'mesh_node0' and 'mesh_node' !-------------------------------------------------------------------------------------------------- subroutine mesh_spectral_build_nodes() implicit none integer(pInt) :: n allocate (mesh_node0 (3,mesh_Nnodes), source = 0.0_pReal) allocate (mesh_node (3,mesh_Nnodes), source = 0.0_pReal) forall (n = 0_pInt:mesh_Nnodes-1_pInt) mesh_node0(1,n+1_pInt) = mesh_unitlength * & geomSize(1)*real(mod(n,(grid(1)+1_pInt) ),pReal) & / real(grid(1),pReal) mesh_node0(2,n+1_pInt) = mesh_unitlength * & geomSize(2)*real(mod(n/(grid(1)+1_pInt),(grid(2)+1_pInt)),pReal) & / real(grid(2),pReal) mesh_node0(3,n+1_pInt) = mesh_unitlength * & size3*real(mod(n/(grid(1)+1_pInt)/(grid(2)+1_pInt),(grid3+1_pInt)),pReal) & / real(grid3,pReal) + & size3offset end forall mesh_node = mesh_node0 end subroutine mesh_spectral_build_nodes !-------------------------------------------------------------------------------------------------- !> @brief Store FEid, type, material, texture, and node list per element. !! Allocates global array 'mesh_element' !> @todo does the IO_error makes sense? !-------------------------------------------------------------------------------------------------- subroutine mesh_spectral_build_elements(fileUnit) use IO, only: & IO_checkAndRewind, & IO_lc, & IO_stringValue, & IO_stringPos, & IO_error, & IO_continuousIntValues, & IO_intValue, & IO_countContinuousIntValues implicit none integer(pInt), intent(in) :: & fileUnit integer(pInt), allocatable, dimension(:) :: chunkPos integer(pInt) :: & e, i, & headerLength = 0_pInt, & maxDataPerLine, & homog, & elemType, & elemOffset integer(pInt), dimension(:), allocatable :: & microstructures, & microGlobal integer(pInt), dimension(1,1) :: & dummySet = 0_pInt character(len=65536) :: & line, & keyword character(len=64), dimension(1) :: & dummyName = '' homog = mesh_spectral_getHomogenization(fileUnit) !-------------------------------------------------------------------------------------------------- ! get header length call IO_checkAndRewind(fileUnit) read(fileUnit,'(a65536)') line chunkPos = IO_stringPos(line) keyword = IO_lc(IO_StringValue(line,chunkPos,2_pInt,.true.)) if (keyword(1:4) == 'head') then headerLength = IO_intValue(line,chunkPos,1_pInt) + 1_pInt else call IO_error(error_ID=841_pInt, ext_msg='mesh_spectral_build_elements') endif !-------------------------------------------------------------------------------------------------- ! get maximum microstructure index call IO_checkAndRewind(fileUnit) do i = 1_pInt, headerLength read(fileUnit,'(a65536)') line enddo maxDataPerLine = 0_pInt i = 1_pInt do while (i > 0_pInt) i = IO_countContinuousIntValues(fileUnit) maxDataPerLine = max(maxDataPerLine, i) ! found a longer line? enddo allocate(mesh_element (4_pInt+8_pInt,mesh_NcpElems), source = 0_pInt) allocate(microstructures (1_pInt+maxDataPerLine), source = 1_pInt) ! prepare to receive counter and max data size allocate(microGlobal (mesh_NcpElemsGlobal), source = 1_pInt) !-------------------------------------------------------------------------------------------------- ! read in microstructures call IO_checkAndRewind(fileUnit) do i=1_pInt,headerLength read(fileUnit,'(a65536)') line enddo e = 0_pInt do while (e < mesh_NcpElemsGlobal .and. microstructures(1) > 0_pInt) ! fill expected number of elements, stop at end of data (or blank line!) microstructures = IO_continuousIntValues(fileUnit,maxDataPerLine,dummyName,dummySet,0_pInt) ! get affected elements do i = 1_pInt,microstructures(1_pInt) e = e+1_pInt ! valid element entry microGlobal(e) = microstructures(1_pInt+i) enddo enddo elemType = 10_pInt elemOffset = product(grid(1:2))*grid3Offset e = 0_pInt do while (e < mesh_NcpElems) ! fill expected number of elements, stop at end of data (or blank line!) e = e+1_pInt ! valid element entry mesh_element( 1,e) = -1_pInt ! DEPRECATED mesh_element( 2,e) = elemType ! elem type mesh_element( 3,e) = homog ! homogenization mesh_element( 4,e) = microGlobal(e+elemOffset) ! microstructure mesh_element( 5,e) = e + (e-1_pInt)/grid(1) + & ((e-1_pInt)/(grid(1)*grid(2)))*(grid(1)+1_pInt) ! base node mesh_element( 6,e) = mesh_element(5,e) + 1_pInt mesh_element( 7,e) = mesh_element(5,e) + grid(1) + 2_pInt mesh_element( 8,e) = mesh_element(5,e) + grid(1) + 1_pInt mesh_element( 9,e) = mesh_element(5,e) +(grid(1) + 1_pInt) * (grid(2) + 1_pInt) ! second floor base node mesh_element(10,e) = mesh_element(9,e) + 1_pInt mesh_element(11,e) = mesh_element(9,e) + grid(1) + 2_pInt mesh_element(12,e) = mesh_element(9,e) + grid(1) + 1_pInt mesh_maxValStateVar(1) = max(mesh_maxValStateVar(1),mesh_element(3,e)) ! needed for statistics mesh_maxValStateVar(2) = max(mesh_maxValStateVar(2),mesh_element(4,e)) enddo if (e /= mesh_NcpElems) call IO_error(880_pInt,e) end subroutine mesh_spectral_build_elements !-------------------------------------------------------------------------------------------------- !> @brief build neighborhood relations for spectral !> @details assign globals: mesh_ipNeighborhood !-------------------------------------------------------------------------------------------------- subroutine mesh_spectral_build_ipNeighborhood implicit none integer(pInt) :: & x,y,z, & e allocate(mesh_ipNeighborhood(3,mesh_maxNipNeighbors,mesh_maxNips,mesh_NcpElems),source=0_pInt) e = 0_pInt do z = 0_pInt,grid3-1_pInt do y = 0_pInt,grid(2)-1_pInt do x = 0_pInt,grid(1)-1_pInt e = e + 1_pInt mesh_ipNeighborhood(1,1,1,e) = z * grid(1) * grid(2) & + y * grid(1) & + modulo(x+1_pInt,grid(1)) & + 1_pInt mesh_ipNeighborhood(1,2,1,e) = z * grid(1) * grid(2) & + y * grid(1) & + modulo(x-1_pInt,grid(1)) & + 1_pInt mesh_ipNeighborhood(1,3,1,e) = z * grid(1) * grid(2) & + modulo(y+1_pInt,grid(2)) * grid(1) & + x & + 1_pInt mesh_ipNeighborhood(1,4,1,e) = z * grid(1) * grid(2) & + modulo(y-1_pInt,grid(2)) * grid(1) & + x & + 1_pInt mesh_ipNeighborhood(1,5,1,e) = modulo(z+1_pInt,grid3) * grid(1) * grid(2) & + y * grid(1) & + x & + 1_pInt mesh_ipNeighborhood(1,6,1,e) = modulo(z-1_pInt,grid3) * grid(1) * grid(2) & + y * grid(1) & + x & + 1_pInt mesh_ipNeighborhood(2,1:6,1,e) = 1_pInt mesh_ipNeighborhood(3,1,1,e) = 2_pInt mesh_ipNeighborhood(3,2,1,e) = 1_pInt mesh_ipNeighborhood(3,3,1,e) = 4_pInt mesh_ipNeighborhood(3,4,1,e) = 3_pInt mesh_ipNeighborhood(3,5,1,e) = 6_pInt mesh_ipNeighborhood(3,6,1,e) = 5_pInt enddo enddo enddo end subroutine mesh_spectral_build_ipNeighborhood !-------------------------------------------------------------------------------------------------- !> @brief builds mesh of (distorted) cubes for given coordinates (= center of the cubes) !-------------------------------------------------------------------------------------------------- function mesh_nodesAroundCentres(gDim,Favg,centres) result(nodes) use debug, only: & debug_mesh, & debug_level, & debug_levelBasic use math, only: & math_mul33x3 implicit none real(pReal), intent(in), dimension(:,:,:,:) :: & centres real(pReal), dimension(3,size(centres,2)+1,size(centres,3)+1,size(centres,4)+1) :: & nodes real(pReal), intent(in), dimension(3) :: & gDim real(pReal), intent(in), dimension(3,3) :: & Favg real(pReal), dimension(3,size(centres,2)+2,size(centres,3)+2,size(centres,4)+2) :: & wrappedCentres integer(pInt) :: & i,j,k,n integer(pInt), dimension(3), parameter :: & diag = 1_pInt integer(pInt), dimension(3) :: & shift = 0_pInt, & lookup = 0_pInt, & me = 0_pInt, & iRes = 0_pInt integer(pInt), dimension(3,8) :: & neighbor = reshape([ & 0_pInt, 0_pInt, 0_pInt, & 1_pInt, 0_pInt, 0_pInt, & 1_pInt, 1_pInt, 0_pInt, & 0_pInt, 1_pInt, 0_pInt, & 0_pInt, 0_pInt, 1_pInt, & 1_pInt, 0_pInt, 1_pInt, & 1_pInt, 1_pInt, 1_pInt, & 0_pInt, 1_pInt, 1_pInt ], [3,8]) !-------------------------------------------------------------------------------------------------- ! initializing variables iRes = [size(centres,2),size(centres,3),size(centres,4)] nodes = 0.0_pReal wrappedCentres = 0.0_pReal !-------------------------------------------------------------------------------------------------- ! report if (iand(debug_level(debug_mesh),debug_levelBasic) /= 0_pInt) then write(6,'(a)') ' Meshing cubes around centroids' write(6,'(a,3(e12.5))') ' Dimension: ', gDim write(6,'(a,3(i5))') ' Resolution:', iRes endif !-------------------------------------------------------------------------------------------------- ! building wrappedCentres = centroids + ghosts wrappedCentres(1:3,2_pInt:iRes(1)+1_pInt,2_pInt:iRes(2)+1_pInt,2_pInt:iRes(3)+1_pInt) = centres do k = 0_pInt,iRes(3)+1_pInt do j = 0_pInt,iRes(2)+1_pInt do i = 0_pInt,iRes(1)+1_pInt if (k==0_pInt .or. k==iRes(3)+1_pInt .or. & ! z skin j==0_pInt .or. j==iRes(2)+1_pInt .or. & ! y skin i==0_pInt .or. i==iRes(1)+1_pInt ) then ! x skin me = [i,j,k] ! me on skin shift = sign(abs(iRes+diag-2_pInt*me)/(iRes+diag),iRes+diag-2_pInt*me) lookup = me-diag+shift*iRes wrappedCentres(1:3,i+1_pInt, j+1_pInt, k+1_pInt) = & centres(1:3,lookup(1)+1_pInt,lookup(2)+1_pInt,lookup(3)+1_pInt) & - math_mul33x3(Favg, real(shift,pReal)*gDim) endif enddo; enddo; enddo !-------------------------------------------------------------------------------------------------- ! averaging do k = 0_pInt,iRes(3); do j = 0_pInt,iRes(2); do i = 0_pInt,iRes(1) do n = 1_pInt,8_pInt nodes(1:3,i+1_pInt,j+1_pInt,k+1_pInt) = & nodes(1:3,i+1_pInt,j+1_pInt,k+1_pInt) + wrappedCentres(1:3,i+1_pInt+neighbor(1,n), & j+1_pInt+neighbor(2,n), & k+1_pInt+neighbor(3,n) ) enddo enddo; enddo; enddo nodes = nodes/8.0_pReal end function mesh_nodesAroundCentres !-------------------------------------------------------------------------------------------------- !> @brief get any additional damask options from input file, sets mesh_periodicSurface !-------------------------------------------------------------------------------------------------- subroutine mesh_get_damaskOptions(fileUnit) use IO, only: & IO_lc, & IO_stringValue, & IO_stringPos implicit none integer(pInt), intent(in) :: fileUnit mesh_periodicSurface = .true. end subroutine mesh_get_damaskOptions !-------------------------------------------------------------------------------------------------- !> @brief calculation of IP interface areas, allocate globals '_ipArea', and '_ipAreaNormal' !-------------------------------------------------------------------------------------------------- subroutine mesh_build_ipAreas use math, only: & math_crossproduct implicit none integer(pInt) :: e,t,g,c,i,f,n,m real(pReal), dimension (3,FE_maxNcellnodesPerCellface) :: nodePos, normals real(pReal), dimension(3) :: normal allocate(mesh_ipArea(mesh_maxNipNeighbors,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(mesh_ipAreaNormal(3_pInt,mesh_maxNipNeighbors,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) !$OMP PARALLEL DO PRIVATE(t,g,c,nodePos,normal,normals) do e = 1_pInt,mesh_NcpElems ! loop over cpElems t = mesh_element(2_pInt,e) ! get element type g = FE_geomtype(t) ! get geometry type c = FE_celltype(g) ! get cell type select case (c) case (1_pInt,2_pInt) ! 2D 3 or 4 node do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element do f = 1_pInt,FE_NipNeighbors(c) ! loop over cell faces forall(n = 1_pInt:FE_NcellnodesPerCellface(c)) & nodePos(1:3,n) = mesh_cellnode(1:3,mesh_cell(FE_cellface(n,f,c),i,e)) normal(1) = nodePos(2,2) - nodePos(2,1) ! x_normal = y_connectingVector normal(2) = -(nodePos(1,2) - nodePos(1,1)) ! y_normal = -x_connectingVector normal(3) = 0.0_pReal mesh_ipArea(f,i,e) = norm2(normal) mesh_ipAreaNormal(1:3,f,i,e) = normal / norm2(normal) ! ensure unit length of area normal enddo enddo case (3_pInt) ! 3D 4node do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element do f = 1_pInt,FE_NipNeighbors(c) ! loop over cell faces forall(n = 1_pInt:FE_NcellnodesPerCellface(c)) & nodePos(1:3,n) = mesh_cellnode(1:3,mesh_cell(FE_cellface(n,f,c),i,e)) normal = math_crossproduct(nodePos(1:3,2) - nodePos(1:3,1), & nodePos(1:3,3) - nodePos(1:3,1)) mesh_ipArea(f,i,e) = norm2(normal) mesh_ipAreaNormal(1:3,f,i,e) = normal / norm2(normal) ! ensure unit length of area normal enddo enddo case (4_pInt) ! 3D 8node ! for this cell type we get the normal of the quadrilateral face as an average of ! four normals of triangular subfaces; since the face consists only of two triangles, ! the sum has to be divided by two; this whole prcedure tries to compensate for ! probable non-planar cell surfaces m = FE_NcellnodesPerCellface(c) do i = 1_pInt,FE_Nips(g) ! loop over ips=cells in this element do f = 1_pInt,FE_NipNeighbors(c) ! loop over cell faces forall(n = 1_pInt:FE_NcellnodesPerCellface(c)) & nodePos(1:3,n) = mesh_cellnode(1:3,mesh_cell(FE_cellface(n,f,c),i,e)) forall(n = 1_pInt:FE_NcellnodesPerCellface(c)) & normals(1:3,n) = 0.5_pReal & * math_crossproduct(nodePos(1:3,1+mod(n ,m)) - nodePos(1:3,n), & nodePos(1:3,1+mod(n+1,m)) - nodePos(1:3,n)) normal = 0.5_pReal * sum(normals,2) mesh_ipArea(f,i,e) = norm2(normal) mesh_ipAreaNormal(1:3,f,i,e) = normal / norm2(normal) enddo enddo end select enddo !$OMP END PARALLEL DO end subroutine mesh_build_ipAreas !-------------------------------------------------------------------------------------------------- !> @brief find face-matching element of same type !-------------------------------------------------------------------------------------------------- subroutine mesh_faceMatch(elem, face ,matchingElem, matchingFace) implicit none integer(pInt), intent(out) :: matchingElem, & ! matching CP element ID matchingFace ! matching face ID integer(pInt), intent(in) :: face, & ! face ID elem ! CP elem ID integer(pInt), dimension(FE_NmatchingNodesPerFace(face,FE_geomtype(mesh_element(2,elem)))) :: & myFaceNodes ! global node ids on my face integer(pInt) :: myType, & candidateType, & candidateElem, & candidateFace, & candidateFaceNode, & minNsharedElems, & NsharedElems, & lonelyNode = 0_pInt, & i, & n, & dir ! periodicity direction integer(pInt), dimension(:), allocatable :: element_seen logical checkTwins matchingElem = 0_pInt matchingFace = 0_pInt minNsharedElems = mesh_maxNsharedElems + 1_pInt ! init to worst case myType = FE_geomtype(mesh_element(2_pInt,elem)) ! figure elemGeomType do n = 1_pInt,FE_NmatchingNodesPerFace(face,myType) ! loop over nodes on face myFaceNodes(n) = mesh_element(4_pInt+FE_face(n,face,myType),elem) ! CP id of face node NsharedElems = mesh_sharedElem(1_pInt,myFaceNodes(n)) ! figure # shared elements for this node if (NsharedElems < minNsharedElems) then minNsharedElems = NsharedElems ! remember min # shared elems lonelyNode = n ! remember most lonely node endif enddo allocate(element_seen(minNsharedElems)) element_seen = 0_pInt checkCandidate: do i = 1_pInt,minNsharedElems ! iterate over lonelyNode's shared elements candidateElem = mesh_sharedElem(1_pInt+i,myFaceNodes(lonelyNode)) ! present candidate elem if (all(element_seen /= candidateElem)) then ! element seen for the first time? element_seen(i) = candidateElem candidateType = FE_geomtype(mesh_element(2_pInt,candidateElem)) ! figure elemGeomType of candidate checkCandidateFace: do candidateFace = 1_pInt,FE_maxNipNeighbors ! check each face of candidate if (FE_NmatchingNodesPerFace(candidateFace,candidateType) & /= FE_NmatchingNodesPerFace(face,myType) & ! incompatible face .or. (candidateElem == elem .and. candidateFace == face)) then ! this is my face cycle checkCandidateFace endif checkTwins = .false. do n = 1_pInt,FE_NmatchingNodesPerFace(candidateFace,candidateType) ! loop through nodes on face candidateFaceNode = mesh_element(4_pInt+FE_face(n,candidateFace,candidateType),candidateElem) if (all(myFaceNodes /= candidateFaceNode)) then ! candidate node does not match any of my face nodes checkTwins = .true. ! perhaps the twin nodes do match exit endif enddo if(checkTwins) then checkCandidateFaceTwins: do dir = 1_pInt,3_pInt do n = 1_pInt,FE_NmatchingNodesPerFace(candidateFace,candidateType) ! loop through nodes on face candidateFaceNode = mesh_element(4+FE_face(n,candidateFace,candidateType),candidateElem) if (all(myFaceNodes /= mesh_nodeTwins(dir,candidateFaceNode))) then ! node twin does not match either if (dir == 3_pInt) then cycle checkCandidateFace else cycle checkCandidateFaceTwins ! try twins in next dimension endif endif enddo exit checkCandidateFaceTwins enddo checkCandidateFaceTwins endif matchingFace = candidateFace matchingElem = candidateElem exit checkCandidate ! found my matching candidate enddo checkCandidateFace endif enddo checkCandidate end subroutine mesh_faceMatch !-------------------------------------------------------------------------------------------------- !> @brief get properties of different types of finite elements !> @details assign globals: FE_nodesAtIP, FE_ipNeighbor, FE_cellnodeParentnodeWeights, FE_subNodeOnIPFace !-------------------------------------------------------------------------------------------------- subroutine mesh_build_FEdata implicit none integer(pInt) :: me allocate(FE_nodesAtIP(FE_maxmaxNnodesAtIP,FE_maxNips,FE_Ngeomtypes), source=0_pInt) allocate(FE_ipNeighbor(FE_maxNipNeighbors,FE_maxNips,FE_Ngeomtypes), source=0_pInt) allocate(FE_cell(FE_maxNcellnodesPerCell,FE_maxNips,FE_Ngeomtypes), source=0_pInt) allocate(FE_cellnodeParentnodeWeights(FE_maxNnodes,FE_maxNcellnodes,FE_Nelemtypes), source=0.0_pReal) allocate(FE_cellface(FE_maxNcellnodesPerCellface,FE_maxNcellfaces,FE_Ncelltypes), source=0_pInt) !*** fill FE_nodesAtIP with data *** me = 0_pInt me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 6 (2D 3node 1ip) reshape(int([& 1,2,3 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 125 (2D 6node 3ip) reshape(int([& 1, & 2, & 3 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 11 (2D 4node 4ip) reshape(int([& 1, & 2, & 4, & 3 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 27 (2D 8node 9ip) reshape(int([& 1,0, & 1,2, & 2,0, & 1,4, & 0,0, & 2,3, & 4,0, & 3,4, & 3,0 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 134 (3D 4node 1ip) reshape(int([& 1,2,3,4 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 127 (3D 10node 4ip) reshape(int([& 1, & 2, & 3, & 4 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 136 (3D 6node 6ip) reshape(int([& 1, & 2, & 3, & 4, & 5, & 6 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 117 (3D 8node 1ip) reshape(int([& 1,2,3,4,5,6,7,8 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 7 (3D 8node 8ip) reshape(int([& 1, & 2, & 4, & 3, & 5, & 6, & 8, & 7 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) me = me + 1_pInt FE_nodesAtIP(1:FE_maxNnodesAtIP(me),1:FE_Nips(me),me) = & ! element 21 (3D 20node 27ip) reshape(int([& 1,0, 0,0, & 1,2, 0,0, & 2,0, 0,0, & 1,4, 0,0, & 1,3, 2,4, & 2,3, 0,0, & 4,0, 0,0, & 3,4, 0,0, & 3,0, 0,0, & 1,5, 0,0, & 1,6, 2,5, & 2,6, 0,0, & 1,8, 4,5, & 0,0, 0,0, & 2,7, 3,6, & 4,8, 0,0, & 3,8, 4,7, & 3,7, 0,0, & 5,0, 0,0, & 5,6, 0,0, & 6,0, 0,0, & 5,8, 0,0, & 5,7, 6,8, & 6,7, 0,0, & 8,0, 0,0, & 7,8, 0,0, & 7,0, 0,0 & ],pInt),[FE_maxNnodesAtIP(me),FE_Nips(me)]) ! *** FE_ipNeighbor *** ! is a list of the neighborhood of each IP. ! It is sorted in (local) +x,-x, +y,-y, +z,-z direction. ! Positive integers denote an intra-FE IP identifier. ! Negative integers denote the interface behind which the neighboring (extra-FE) IP will be located. me = 0_pInt me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 6 (2D 3node 1ip) reshape(int([& -2,-3,-1 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 125 (2D 6node 3ip) reshape(int([& 2,-3, 3,-1, & -2, 1, 3,-1, & 2,-3,-2, 1 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 11 (2D 4node 4ip) reshape(int([& 2,-4, 3,-1, & -2, 1, 4,-1, & 4,-4,-3, 1, & -2, 3,-3, 2 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 27 (2D 8node 9ip) reshape(int([& 2,-4, 4,-1, & 3, 1, 5,-1, & -2, 2, 6,-1, & 5,-4, 7, 1, & 6, 4, 8, 2, & -2, 5, 9, 3, & 8,-4,-3, 4, & 9, 7,-3, 5, & -2, 8,-3, 6 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 134 (3D 4node 1ip) reshape(int([& -1,-2,-3,-4 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 127 (3D 10node 4ip) reshape(int([& 2,-4, 3,-2, 4,-1, & -2, 1, 3,-2, 4,-1, & 2,-4,-3, 1, 4,-1, & 2,-4, 3,-2,-3, 1 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 136 (3D 6node 6ip) reshape(int([& 2,-4, 3,-2, 4,-1, & -3, 1, 3,-2, 5,-1, & 2,-4,-3, 1, 6,-1, & 5,-4, 6,-2,-5, 1, & -3, 4, 6,-2,-5, 2, & 5,-4,-3, 4,-5, 3 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 117 (3D 8node 1ip) reshape(int([& -3,-5,-4,-2,-6,-1 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 7 (3D 8node 8ip) reshape(int([& 2,-5, 3,-2, 5,-1, & -3, 1, 4,-2, 6,-1, & 4,-5,-4, 1, 7,-1, & -3, 3,-4, 2, 8,-1, & 6,-5, 7,-2,-6, 1, & -3, 5, 8,-2,-6, 2, & 8,-5,-4, 5,-6, 3, & -3, 7,-4, 6,-6, 4 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_ipNeighbor(1:FE_NipNeighbors(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 21 (3D 20node 27ip) reshape(int([& 2,-5, 4,-2,10,-1, & 3, 1, 5,-2,11,-1, & -3, 2, 6,-2,12,-1, & 5,-5, 7, 1,13,-1, & 6, 4, 8, 2,14,-1, & -3, 5, 9, 3,15,-1, & 8,-5,-4, 4,16,-1, & 9, 7,-4, 5,17,-1, & -3, 8,-4, 6,18,-1, & 11,-5,13,-2,19, 1, & 12,10,14,-2,20, 2, & -3,11,15,-2,21, 3, & 14,-5,16,10,22, 4, & 15,13,17,11,23, 5, & -3,14,18,12,24, 6, & 17,-5,-4,13,25, 7, & 18,16,-4,14,26, 8, & -3,17,-4,15,27, 9, & 20,-5,22,-2,-6,10, & 21,19,23,-2,-6,11, & -3,20,24,-2,-6,12, & 23,-5,25,19,-6,13, & 24,22,26,20,-6,14, & -3,23,27,21,-6,15, & 26,-5,-4,22,-6,16, & 27,25,-4,23,-6,17, & -3,26,-4,24,-6,18 & ],pInt),[FE_NipNeighbors(FE_celltype(me)),FE_Nips(me)]) ! *** FE_cell *** me = 0_pInt me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 6 (2D 3node 1ip) reshape(int([& 1,2,3 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 125 (2D 6node 3ip) reshape(int([& 1, 4, 7, 6, & 2, 5, 7, 4, & 3, 6, 7, 5 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 11 (2D 4node 4ip) reshape(int([& 1, 5, 9, 8, & 5, 2, 6, 9, & 8, 9, 7, 4, & 9, 6, 3, 7 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 27 (2D 8node 9ip) reshape(int([& 1, 5,13,12, & 5, 6,14,13, & 6, 2, 7,14, & 12,13,16,11, & 13,14,15,16, & 14, 7, 8,15, & 11,16,10, 4, & 16,15, 9,10, & 15, 8, 3, 9 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 134 (3D 4node 1ip) reshape(int([& 1, 2, 3, 4 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 127 (3D 10node 4ip) reshape(int([& 1, 5,11, 7, 8,12,15,14, & 5, 2, 6,11,12, 9,13,15, & 7,11, 6, 3,14,15,13,10, & 8,12,15, 4, 4, 9,13,10 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 136 (3D 6node 6ip) reshape(int([& 1, 7,16, 9,10,17,21,19, & 7, 2, 8,16,17,11,18,21, & 9,16, 8, 3,19,21,18,12, & 10,17,21,19, 4,13,20,15, & 17,11,18,21,13, 5,14,20, & 19,21,18,12,15,20,14, 6 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 117 (3D 8node 1ip) reshape(int([& 1, 2, 3, 4, 5, 6, 7, 8 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 7 (3D 8node 8ip) reshape(int([& 1, 9,21,12,13,22,27,25, & 9, 2,10,21,22,14,23,27, & 12,21,11, 4,25,27,24,16, & 21,10, 3,11,27,23,15,24, & 13,22,27,25, 5,17,26,20, & 22,14,23,27,17, 6,18,26, & 25,27,24,16,20,26,19, 8, & 27,23,15,24,26,18, 7,19 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) me = me + 1_pInt FE_cell(1:FE_NcellnodesPerCell(FE_celltype(me)),1:FE_Nips(me),me) = & ! element 21 (3D 20node 27ip) reshape(int([& 1, 9,33,16,17,37,57,44, & 9,10,34,33,37,38,58,57, & 10, 2,11,34,38,18,39,58, & 16,33,36,15,44,57,60,43, & 33,34,35,36,57,58,59,60, & 34,11,12,35,58,39,40,59, & 15,36,14, 4,43,60,42,20, & 36,35,13,14,60,59,41,42, & 35,12, 3,13,59,40,19,41, & 17,37,57,44,21,45,61,52, & 37,38,58,57,45,46,62,61, & 38,18,39,58,46,22,47,62, & 44,57,60,43,52,61,64,51, & 57,58,59,60,61,62,63,64, & 58,39,40,59,62,47,48,63, & 43,60,42,20,51,64,50,24, & 60,59,41,42,64,63,49,50, & 59,40,19,41,63,48,23,49, & 21,45,61,52, 5,25,53,32, & 45,46,62,61,25,26,54,53, & 46,22,47,62,26, 6,27,54, & 52,61,64,51,32,53,56,31, & 61,62,63,64,53,54,55,56, & 62,47,48,63,54,27,28,55, & 51,64,50,24,31,56,30, 8, & 64,63,49,50,56,55,29,30, & 63,48,23,49,55,28, 7,29 & ],pInt),[FE_NcellnodesPerCell(FE_celltype(me)),FE_Nips(me)]) ! *** FE_cellnodeParentnodeWeights *** ! center of gravity of the weighted nodes gives the position of the cell node. ! fill with 0. ! example: face-centered cell node with face nodes 1,2,5,6 to be used in, ! e.g., an 8 node element, would be encoded: ! 1, 1, 0, 0, 1, 1, 0, 0 me = 0_pInt me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 6 (2D 3node 1ip) reshape(real([& 1, 0, 0, & 0, 1, 0, & 0, 0, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 125 (2D 6node 3ip) reshape(real([& 1, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, & 0, 0, 0, 1, 0, 0, & 0, 0, 0, 0, 1, 0, & 0, 0, 0, 0, 0, 1, & 1, 1, 1, 2, 2, 2 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 11 (2D 4node 4ip) reshape(real([& 1, 0, 0, 0, & 0, 1, 0, 0, & 0, 0, 1, 0, & 0, 0, 0, 1, & 1, 1, 0, 0, & 0, 1, 1, 0, & 0, 0, 1, 1, & 1, 0, 0, 1, & 1, 1, 1, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 27 (2D 8node 9ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, 0, 0, & 0, 0, 0, 1, 0, 0, 0, 0, & 1, 0, 0, 0, 2, 0, 0, 0, & 0, 1, 0, 0, 2, 0, 0, 0, & 0, 1, 0, 0, 0, 2, 0, 0, & 0, 0, 1, 0, 0, 2, 0, 0, & 0, 0, 1, 0, 0, 0, 2, 0, & 0, 0, 0, 1, 0, 0, 2, 0, & 0, 0, 0, 1, 0, 0, 0, 2, & 1, 0, 0, 0, 0, 0, 0, 2, & 4, 1, 1, 1, 8, 2, 2, 8, & 1, 4, 1, 1, 8, 8, 2, 2, & 1, 1, 4, 1, 2, 8, 8, 2, & 1, 1, 1, 4, 2, 2, 8, 8 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 54 (2D 8node 4ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, 0, 0, & 0, 0, 0, 1, 0, 0, 0, 0, & 0, 0, 0, 0, 1, 0, 0, 0, & 0, 0, 0, 0, 0, 1, 0, 0, & 0, 0, 0, 0, 0, 0, 1, 0, & 0, 0, 0, 0, 0, 0, 0, 1, & 1, 1, 1, 1, 2, 2, 2, 2 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 134 (3D 4node 1ip) reshape(real([& 1, 0, 0, 0, & 0, 1, 0, 0, & 0, 0, 1, 0, & 0, 0, 0, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 157 (3D 5node 4ip) reshape(real([& 1, 0, 0, 0, 0, & 0, 1, 0, 0, 0, & 0, 0, 1, 0, 0, & 0, 0, 0, 1, 0, & 1, 1, 0, 0, 0, & 0, 1, 1, 0, 0, & 1, 0, 1, 0, 0, & 1, 0, 0, 1, 0, & 0, 1, 0, 1, 0, & 0, 0, 1, 1, 0, & 1, 1, 1, 0, 0, & 1, 1, 0, 1, 0, & 0, 1, 1, 1, 0, & 1, 0, 1, 1, 0, & 0, 0, 0, 0, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 127 (3D 10node 4ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, & 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, & 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, & 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, & 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, & 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, & 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, & 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, & 1, 1, 1, 0, 2, 2, 2, 0, 0, 0, & 1, 1, 0, 1, 2, 0, 0, 2, 2, 0, & 0, 1, 1, 1, 0, 2, 0, 0, 2, 2, & 1, 0, 1, 1, 0, 0, 2, 2, 0, 2, & 3, 3, 3, 3, 4, 4, 4, 4, 4, 4 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 136 (3D 6node 6ip) reshape(real([& 1, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, & 0, 0, 0, 1, 0, 0, & 0, 0, 0, 0, 1, 0, & 0, 0, 0, 0, 0, 1, & 1, 1, 0, 0, 0, 0, & 0, 1, 1, 0, 0, 0, & 1, 0, 1, 0, 0, 0, & 1, 0, 0, 1, 0, 0, & 0, 1, 0, 0, 1, 0, & 0, 0, 1, 0, 0, 1, & 0, 0, 0, 1, 1, 0, & 0, 0, 0, 0, 1, 1, & 0, 0, 0, 1, 0, 1, & 1, 1, 1, 0, 0, 0, & 1, 1, 0, 1, 1, 0, & 0, 1, 1, 0, 1, 1, & 1, 0, 1, 1, 0, 1, & 0, 0, 0, 1, 1, 1, & 1, 1, 1, 1, 1, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 117 (3D 8node 1ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, & 0, 1, 0, 0, 0, 0, 0, 0, & 0, 0, 1, 0, 0, 0, 0, 0, & 0, 0, 0, 1, 0, 0, 0, 0, & 0, 0, 0, 0, 1, 0, 0, 0, & 0, 0, 0, 0, 0, 1, 0, 0, & 0, 0, 0, 0, 0, 0, 1, 0, & 0, 0, 0, 0, 0, 0, 0, 1 & ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 7 (3D 8node 8ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, & ! 0, 1, 0, 0, 0, 0, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 0, 0, 0, & ! 5 0, 0, 0, 0, 0, 1, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, & ! 0, 0, 0, 0, 0, 0, 0, 1, & ! 1, 1, 0, 0, 0, 0, 0, 0, & ! 0, 1, 1, 0, 0, 0, 0, 0, & ! 10 0, 0, 1, 1, 0, 0, 0, 0, & ! 1, 0, 0, 1, 0, 0, 0, 0, & ! 1, 0, 0, 0, 1, 0, 0, 0, & ! 0, 1, 0, 0, 0, 1, 0, 0, & ! 0, 0, 1, 0, 0, 0, 1, 0, & ! 15 0, 0, 0, 1, 0, 0, 0, 1, & ! 0, 0, 0, 0, 1, 1, 0, 0, & ! 0, 0, 0, 0, 0, 1, 1, 0, & ! 0, 0, 0, 0, 0, 0, 1, 1, & ! 0, 0, 0, 0, 1, 0, 0, 1, & ! 20 1, 1, 1, 1, 0, 0, 0, 0, & ! 1, 1, 0, 0, 1, 1, 0, 0, & ! 0, 1, 1, 0, 0, 1, 1, 0, & ! 0, 0, 1, 1, 0, 0, 1, 1, & ! 1, 0, 0, 1, 1, 0, 0, 1, & ! 25 0, 0, 0, 0, 1, 1, 1, 1, & ! 1, 1, 1, 1, 1, 1, 1, 1 & ! ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 57 (3D 20node 8ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 5 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 10 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, & ! 15 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, & ! 20 1, 1, 1, 1, 0, 0, 0, 0, 2, 2, 2, 2, 0, 0, 0, 0, 0, 0, 0, 0, & ! 1, 1, 0, 0, 1, 1, 0, 0, 2, 0, 0, 0, 2, 0, 0, 0, 2, 2, 0, 0, & ! 0, 1, 1, 0, 0, 1, 1, 0, 0, 2, 0, 0, 0, 2, 0, 0, 0, 2, 2, 0, & ! 0, 0, 1, 1, 0, 0, 1, 1, 0, 0, 2, 0, 0, 0, 2, 0, 0, 0, 2, 2, & ! 1, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 2, 0, 0, 0, 2, 2, 0, 0, 2, & ! 25 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 2, 2, 2, 2, 0, 0, 0, 0, & ! 3, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 & ! ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) me = me + 1_pInt FE_cellnodeParentnodeWeights(1:FE_Nnodes(me),1:FE_Ncellnodes(FE_geomtype(me)),me) = & ! element 21 (3D 20node 27ip) reshape(real([& 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 5 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 10 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, & ! 15 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, & ! 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, & ! 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, & ! 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, & ! 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, & ! 20 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, & ! 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, & ! 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, & ! 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, & ! 25 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, & ! 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, & ! 30 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, & ! 4, 1, 1, 1, 0, 0, 0, 0, 8, 2, 2, 8, 0, 0, 0, 0, 0, 0, 0, 0, & ! 1, 4, 1, 1, 0, 0, 0, 0, 8, 8, 2, 2, 0, 0, 0, 0, 0, 0, 0, 0, & ! 1, 1, 4, 1, 0, 0, 0, 0, 2, 8, 8, 2, 0, 0, 0, 0, 0, 0, 0, 0, & ! 35 1, 1, 1, 4, 0, 0, 0, 0, 2, 2, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0, & ! 4, 1, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 8, 2, 0, 0, & ! 1, 4, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 2, 8, 0, 0, & ! 0, 4, 1, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 8, 2, 0, & ! 0, 1, 4, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 2, 8, 0, & ! 40 0, 0, 4, 1, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 8, 2, & ! 0, 0, 1, 4, 0, 0, 1, 1, 0, 0, 8, 0, 0, 0, 2, 0, 0, 0, 2, 8, & ! 1, 0, 0, 4, 1, 0, 0, 1, 0, 0, 0, 8, 0, 0, 0, 2, 2, 0, 0, 8, & ! 4, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 8, 0, 0, 0, 2, 8, 0, 0, 2, & ! 1, 1, 0, 0, 4, 1, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 8, 2, 0, 0, & ! 45 1, 1, 0, 0, 1, 4, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 2, 8, 0, 0, & ! 0, 1, 1, 0, 0, 4, 1, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 8, 2, 0, & ! 0, 1, 1, 0, 0, 1, 4, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 2, 8, 0, & ! 0, 0, 1, 1, 0, 0, 4, 1, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 8, 2, & ! 0, 0, 1, 1, 0, 0, 1, 4, 0, 0, 2, 0, 0, 0, 8, 0, 0, 0, 2, 8, & ! 50 1, 0, 0, 1, 1, 0, 0, 4, 0, 0, 0, 2, 0, 0, 0, 8, 2, 0, 0, 8, & ! 1, 0, 0, 1, 4, 0, 0, 1, 0, 0, 0, 2, 0, 0, 0, 8, 8, 0, 0, 2, & ! 0, 0, 0, 0, 4, 1, 1, 1, 0, 0, 0, 0, 8, 2, 2, 8, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 4, 1, 1, 0, 0, 0, 0, 8, 8, 2, 2, 0, 0, 0, 0, & ! 0, 0, 0, 0, 1, 1, 4, 1, 0, 0, 0, 0, 2, 8, 8, 2, 0, 0, 0, 0, & ! 55 0, 0, 0, 0, 1, 1, 1, 4, 0, 0, 0, 0, 2, 2, 8, 8, 0, 0, 0, 0, & ! 24, 8, 4, 8, 8, 4, 3, 4, 32,12,12,32, 12, 4, 4,12, 32,12, 4,12, & ! 8,24, 8, 4, 4, 8, 4, 3, 32,32,12,12, 12,12, 4, 4, 12,32,12, 4, & ! 4, 8,24, 8, 3, 4, 8, 4, 12,32,32,12, 4,12,12, 4, 4,12,32,12, & ! 8, 4, 8,24, 4, 3, 4, 8, 12,12,32,32, 4, 4,12,12, 12, 4,12,32, & ! 60 8, 4, 3, 4, 24, 8, 4, 8, 12, 4, 4,12, 32,12,12,32, 32,12, 4,12, & ! 4, 8, 4, 3, 8,24, 8, 4, 12,12, 4, 4, 32,32,12,12, 12,32,12, 4, & ! 3, 4, 8, 4, 4, 8,24, 8, 4,12,12, 4, 12,32,32,12, 4,12,32,12, & ! 4, 3, 4, 8, 8, 4, 8,24, 4, 4,12,12, 12,12,32,32, 12, 4,12,32 & ! ],pReal),[FE_Nnodes(me),FE_Ncellnodes(FE_geomtype(me))]) ! *** FE_cellface *** me = 0_pInt me = me + 1_pInt FE_cellface(1:FE_NcellnodesPerCellface(me),1:FE_NipNeighbors(me),me) = & ! 2D 3node, VTK_TRIANGLE (5) reshape(int([& 2,3, & 3,1, & 1,2 & ],pInt),[FE_NcellnodesPerCellface(me),FE_NipNeighbors(me)]) me = me + 1_pInt FE_cellface(1:FE_NcellnodesPerCellface(me),1:FE_NipNeighbors(me),me) = & ! 2D 4node, VTK_QUAD (9) reshape(int([& 2,3, & 4,1, & 3,4, & 1,2 & ],pInt),[FE_NcellnodesPerCellface(me),FE_NipNeighbors(me)]) me = me + 1_pInt FE_cellface(1:FE_NcellnodesPerCellface(me),1:FE_NipNeighbors(me),me) = & ! 3D 4node, VTK_TETRA (10) reshape(int([& 1,3,2, & 1,2,4, & 2,3,4, & 1,4,3 & ],pInt),[FE_NcellnodesPerCellface(me),FE_NipNeighbors(me)]) me = me + 1_pInt FE_cellface(1:FE_NcellnodesPerCellface(me),1:FE_NipNeighbors(me),me) = & ! 3D 8node, VTK_HEXAHEDRON (12) reshape(int([& 2,3,7,6, & 4,1,5,8, & 3,4,8,7, & 1,2,6,5, & 5,6,7,8, & 1,4,3,2 & ],pInt),[FE_NcellnodesPerCellface(me),FE_NipNeighbors(me)]) end subroutine mesh_build_FEdata !-------------------------------------------------------------------------------------------------- !> @brief returns global variable mesh_Ncellnodes !-------------------------------------------------------------------------------------------------- integer(pInt) function mesh_get_Ncellnodes() implicit none mesh_get_Ncellnodes = mesh_Ncellnodes end function mesh_get_Ncellnodes !-------------------------------------------------------------------------------------------------- !> @brief returns global variable mesh_unitlength !-------------------------------------------------------------------------------------------------- real(pReal) function mesh_get_unitlength() implicit none mesh_get_unitlength = mesh_unitlength end function mesh_get_unitlength !-------------------------------------------------------------------------------------------------- !> @brief returns node that is located at an ip !> @details return zero if requested ip does not exist or not available (more ips than nodes) !-------------------------------------------------------------------------------------------------- integer(pInt) function mesh_get_nodeAtIP(elemtypeFE,ip) implicit none character(len=*), intent(in) :: elemtypeFE integer(pInt), intent(in) :: ip integer(pInt) :: elemtype integer(pInt) :: geomtype mesh_get_nodeAtIP = 0_pInt elemtype = 10_pInt geomtype = FE_geomtype(elemtype) if (FE_Nips(geomtype) >= ip .and. FE_Nips(geomtype) <= FE_Nnodes(elemtype)) & mesh_get_nodeAtIP = FE_nodesAtIP(1,ip,geomtype) end function mesh_get_nodeAtIP end module mesh