! Copyright 2011-13 Max-Planck-Institut für Eisenforschung GmbH ! ! This file is part of DAMASK, ! the Düsseldorf Advanced Material Simulation Kit. ! ! DAMASK is free software: you can redistribute it and/or modify ! it under the terms of the GNU General Public License as published by ! the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! DAMASK is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License ! along with DAMASK. If not, see . ! !-------------------------------------------------------------------------------------------------- ! $Id$ !-------------------------------------------------------------------------------------------------- !> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH !> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH !> @author Luc Hantcherli, Max-Planck-Institut für Eisenforschung GmbH !> @author W.A. Counts !> @author Denny Tjahjanto, Max-Planck-Institut für Eisenforschung GmbH !> @author Christoph Kords, Max-Planck-Institut für Eisenforschung GmbH !> @brief Material subroutine for MSC.Marc !> @details Usage: !> @details - choose material as hypela2 !> @details - set statevariable 2 to index of homogenization !> @details - set statevariable 3 to index of microstructure !> @details - make sure the file "material.config" exists in the working directory !> @details - make sure the file "numerics.config" exists in the working directory !> @details - use nonsymmetric option for solver (e.g. direct profile or multifrontal sparse, !> @details the latter seems to be faster!) !> @details - in case of ddm (domain decomposition) a SYMMETRIC solver has to be used, !> @details i.e uncheck "non-symmetric" !> @details Marc subroutines used: !> @details - hypela2 !> @details - plotv !> @details - quit !> @details Marc common blocks included: !> @details - concom: lovl, inc !> @details - creeps: timinc !-------------------------------------------------------------------------------------------------- #define QUOTE(x) #x #define PASTE(x,y) x ## y #ifndef INT #define INT 4 #endif #ifndef FLOAT #define FLOAT 8 #endif #define Marc #include "prec.f90" module DAMASK_interface implicit none character(len=4), parameter :: InputFileExtension = '.dat' character(len=4), parameter :: LogFileExtension = '.log' contains !-------------------------------------------------------------------------------------------------- !> @brief only output of current version !-------------------------------------------------------------------------------------------------- subroutine DAMASK_interface_init implicit none !$OMP CRITICAL (write2out) write(6,'(/,a)') ' <<<+- DAMASK_marc init -+>>>' write(6,'(a)') ' $Id$' #include "compilation_info.f90" !$OMP END CRITICAL (write2out) end subroutine DAMASK_interface_init !-------------------------------------------------------------------------------------------------- !> @brief returns the current workingDir !-------------------------------------------------------------------------------------------------- function getSolverWorkingDirectoryName() implicit none character(1024) getSolverWorkingDirectoryName, inputName character(len=*), parameter :: pathSep = achar(47)//achar(92) ! forward and backward slash getSolverWorkingDirectoryName='' inputName='' inquire(5, name=inputName) ! determine inputputfile getSolverWorkingDirectoryName=inputName(1:scan(inputName,pathSep,back=.true.)) end function getSolverWorkingDirectoryName !-------------------------------------------------------------------------------------------------- !> @brief solver job name (no extension) as combination of geometry and load case name !-------------------------------------------------------------------------------------------------- function getSolverJobName() use prec, only: & pReal, & pInt implicit none character(1024) :: getSolverJobName, inputName character(len=*), parameter :: pathSep = achar(47)//achar(92) ! forward and backward slash integer(pInt) :: extPos getSolverJobName='' inputName='' inquire(5, name=inputName) ! determine inputfile extPos = len_trim(inputName)-4 getSolverJobName=inputName(scan(inputName,pathSep,back=.true.)+1:extPos) end function getSolverJobName end module DAMASK_interface #include "IO.f90" #include "libs.f90" #include "numerics.f90" #include "debug.f90" #include "math.f90" #include "FEsolving.f90" #include "mesh.f90" #include "material.f90" #include "lattice.f90" #include "constitutive_none.f90" #include "constitutive_j2.f90" #include "constitutive_phenopowerlaw.f90" #include "constitutive_titanmod.f90" #include "constitutive_dislotwin.f90" #include "constitutive_nonlocal.f90" #include "constitutive.f90" #include "crystallite.f90" #include "homogenization_isostrain.f90" #include "homogenization_RGC.f90" #include "homogenization.f90" #include "CPFEM.f90" !-------------------------------------------------------------------------------------------------- !> @brief This is the MSC.Marc user subroutine for defining material behavior !> @details (1) F,R,U are only available for continuum and membrane elements (not for !> @details shells and beams). !> @details !> @details (2) Use the -> 'Plasticity,3' card(=update+finite+large disp+constant d) !> @details in the parameter section of input deck (updated Lagrangian formulation). !> @details !> @details The following operation obtains U (stretch tensor) at t=n+1 : !> @details !> @details call scla(un1,0.d0,itel,itel,1) !> @details do k=1,3 !> @details do i=1,3 !> @details do j=1,3 !> @details un1(i,j)=un1(i,j)+dsqrt(strechn1(k))*eigvn1(i,k)*eigvn1(j,k) !> @details enddo !> @details enddo !> @details enddo !-------------------------------------------------------------------------------------------------- subroutine hypela2(d,g,e,de,s,t,dt,ngens,m,nn,kcus,matus,ndi,nshear,disp, & dispt,coord,ffn,frotn,strechn,eigvn,ffn1,frotn1, & strechn1,eigvn1,ncrd,itel,ndeg,ndm,nnode, & jtype,lclass,ifr,ifu) use prec, only: & pReal, & pInt use numerics, only: & !$ DAMASK_NumThreadsInt, & numerics_unitlength use FEsolving, only: & cycleCounter, & theInc, & calcMode, & lastMode, & theTime, & theDelta, & lastIncConverged, & outdatedByNewInc, & outdatedFFN1, & terminallyIll, & symmetricSolver use math, only: & math_transpose33,& invnrmMandel use debug, only: & debug_level, & debug_LEVELBASIC, & debug_MARC, & debug_info, & debug_reset use mesh, only: & mesh_FEasCP, & mesh_element, & mesh_node0, & mesh_node, & mesh_cellnode, & mesh_build_cellnodes, & mesh_build_ipCoordinates, & FE_Nnodes use CPFEM, only: & CPFEM_general, & CPFEM_init_done, & CPFEM_initAll, & CPFEM_CALCRESULTS, & CPFEM_AGERESULTS, & CPFEM_COLLECT, & CPFEM_RESTOREJACOBIAN, & CPFEM_BACKUPJACOBIAN implicit none !$ include "omp_lib.h" ! the openMP function library integer(pInt), intent(in) :: & ! according to MSC.Marc 2012 Manual D ngens, & !< size of stress-strain law nn, & !< integration point number ndi, & !< number of direct components nshear, & !< number of shear components ncrd, & !< number of coordinates itel, & !< dimension of F and R, either 2 or 3 ndeg, & !< number of degrees of freedom ndm, & !< not specified in MSC.Marc 2012 Manual D nnode, & !< number of nodes per element jtype, & !< element type ifr, & !< set to 1 if R has been calculated ifu !< set to 1 if stretch has been calculated integer(pInt), dimension(2), intent(in) :: & ! according to MSC.Marc 2012 Manual D m, & !< (1) user element number, (2) internal element number matus, & !< (1) user material identification number, (2) internal material identification number kcus, & !< (1) layer number, (2) internal layer number lclass !< (1) element class, (2) 0: displacement, 1: low order Herrmann, 2: high order Herrmann real(pReal), dimension(*), intent(in) :: & ! has dimension(1) according to MSC.Marc 2012 Manual D, but according to example hypela2.f dimension(*) e, & !< total elastic strain de, & !< increment of strain dt !< increment of state variables real(pReal), dimension(itel), intent(in) :: & ! according to MSC.Marc 2012 Manual D strechn, & !< square of principal stretch ratios, lambda(i) at t=n strechn1 !< square of principal stretch ratios, lambda(i) at t=n+1 real(pReal), dimension(3,3), intent(in) :: & ! has dimension(itel,*) according to MSC.Marc 2012 Manual D, but we alway assume dimension(3,3) ffn, & !< deformation gradient at t=n ffn1 !< deformation gradient at t=n+1 real(pReal), dimension(itel,*), intent(in) :: & ! according to MSC.Marc 2012 Manual D frotn, & !< rotation tensor at t=n eigvn, & !< i principal direction components for j eigenvalues at t=n frotn1, & !< rotation tensor at t=n+1 eigvn1 !< i principal direction components for j eigenvalues at t=n+1 real(pReal), dimension(ndeg,*), intent(in) :: & ! according to MSC.Marc 2012 Manual D disp, & !< incremental displacements dispt !< displacements at t=n (at assembly, lovl=4) and displacements at t=n+1 (at stress recovery, lovl=6) real(pReal), dimension(ncrd,*), intent(in) :: & ! according to MSC.Marc 2012 Manual D coord !< coordinates real(pReal), dimension(*), intent(inout) :: & ! according to MSC.Marc 2012 Manual D t !< state variables (comes in at t=n, must be updated to have state variables at t=n+1) real(pReal), dimension(ndi+nshear), intent(out) :: & ! has dimension(*) according to MSC.Marc 2012 Manual D, but we need to loop over it s, & !< stress - should be updated by user g !< change in stress due to temperature effects real(pReal), dimension(ngens,ngens), intent(out) :: & ! according to MSC.Marc 2012 Manual D, but according to example hypela2.f dimension(ngens,*) d !< stress-strain law to be formed !-------------------------------------------------------------------------------------------------- ! Marc common blocks are in fixed format so they have to be reformated to free format (f90) ! Beware of changes in newer Marc versions #include QUOTE(PASTE(../lib/MarcInclude/concom,Marc4DAMASK)) ! concom is needed for inc, lovl #include QUOTE(PASTE(../lib/MarcInclude/creeps,Marc4DAMASK)) ! creeps is needed for timinc (time increment) logical :: cutBack real(pReal), dimension(6) :: stress real(pReal), dimension(6,6) :: ddsdde integer(pInt) :: computationMode, i, cp_en, node, CPnodeID !$ integer(pInt) :: defaultNumThreadsInt !< default value set by Marc !$ defaultNumThreadsInt = omp_get_num_threads() ! remember number of threads set by Marc if (iand(debug_level(debug_MARC),debug_LEVELBASIC) /= 0_pInt) then write(6,'(a,/,i8,i8,i2)') ' MSC.MARC information on shape of element(2), IP:', m, nn write(6,'(a,2(1i))'), ' Jacobian: ', ngens,ngens write(6,'(a,1i)'), ' Direct stress: ', ndi write(6,'(a,1i)'), ' Shear stress: ', nshear write(6,'(a,1i)'), ' DoF: ', ndeg write(6,'(a,1i)'), ' Coordinates: ', ncrd write(6,'(a,1i)'), ' Nodes: ', nnode write(6,'(a,1i)'), ' Deformation gradient: ', itel write(6,'(/,a,/,3(3(f12.7,1x)/))',advance='no') ' Deformation gradient at t=n:', & math_transpose33(ffn) write(6,'(/,a,/,3(3(f12.7,1x)/))',advance='no') ' Deformation gradient at t=n+1:', & math_transpose33(ffn1) endif if (.not. CPFEM_init_done) call CPFEM_initAll(t(1),m(1),nn) !$ call omp_set_num_threads(DAMASK_NumThreadsInt) ! set number of threads for parallel execution set by DAMASK_NUM_THREADS if (lovl == 4 ) then if(timinc < theDelta .and. theInc == inc ) computationMode = CPFEM_RESTOREJACOBIAN ! first after cutback else ! stress requested (lovl == 6) cp_en = mesh_FEasCP('elem',m(1)) if (cptim > theTime .or. inc /= theInc) then ! reached "convergence" terminallyIll = .false. cycleCounter = -1 ! first calc step increments this to cycle = 0 if (inc == 0) then ! >> start of analysis << lastIncConverged = .false. ! no Jacobian backup outdatedByNewInc = .false. ! no aging of state lastMode = .false. ! pretend last step was collection calcMode = .false. ! pretend last step was collection !$OMP CRITICAL (write2out) write(6,'(a,i6,1x,i2)') '<< HYPELA2 >> start of analysis..! ',m(1),nn flush(6) !$OMP END CRITICAL (write2out) else if (inc - theInc > 1) then ! >> restart of broken analysis << lastIncConverged = .false. ! no Jacobian backup outdatedByNewInc = .false. ! no aging of state lastMode = .true. ! pretend last step was calculation calcMode = .true. ! pretend last step was calculation !$OMP CRITICAL (write2out) write(6,'(a,i6,1x,i2)') '<< HYPELA2 >> restart of analysis..! ',m(1),nn flush(6) !$OMP END CRITICAL (write2out) else ! >> just the next inc << lastIncConverged = .true. ! request Jacobian backup outdatedByNewInc = .true. ! request aging of state lastMode = .true. ! assure last step was calculation calcMode = .true. ! assure last step was calculation !$OMP CRITICAL (write2out) write(6,'(a,i6,1x,i2)') '<< HYPELA2 >> new increment..! ',m(1),nn flush(6) !$OMP END CRITICAL (write2out) endif else if ( timinc < theDelta ) then ! >> cutBack << terminallyIll = .false. cycleCounter = -1 ! first calc step increments this to cycle = 0 calcMode = .true. ! pretend last step was calculation !$OMP CRITICAL (write2out) write(6,'(a,i6,1x,i2)') '<< HYPELA2 >> cutback detected..! ',m(1),nn flush(6) !$OMP END CRITICAL (write2out) endif ! convergence treatment end calcMode(nn,cp_en) = .not. calcMode(nn,cp_en) ! ping pong (calc <--> collect) if ( calcMode(nn,cp_en) ) then ! now --- CALC --- if ( lastMode /= calcMode(nn,cp_en) ) then ! first after ping pong call debug_reset() ! resets debugging outdatedFFN1 = .false. cycleCounter = cycleCounter + 1_pInt mesh_cellnode = mesh_build_cellnodes(mesh_node) ! update cell node coordinates call mesh_build_ipCoordinates() ! update ip coordinates endif if ( outdatedByNewInc ) then computationMode = ior(CPFEM_CALCRESULTS,CPFEM_AGERESULTS) outdatedByNewInc = .false. ! reset flag else computationMode = CPFEM_CALCRESULTS endif else ! now --- COLLECT --- if ( lastMode /= calcMode(nn,cp_en) .and. & .not. terminallyIll) call debug_info() ! first after ping pong reports (meaningful) debugging if ( lastIncConverged ) then computationMode = ior(CPFEM_COLLECT,CPFEM_BACKUPJACOBIAN) ! collect and backup Jacobian after convergence lastIncConverged = .false. ! reset flag else computationMode = CPFEM_COLLECT ! plain collect endif do node = 1,FE_Nnodes(mesh_element(2,cp_en)) CPnodeID = mesh_element(4_pInt+node,cp_en) mesh_node(1:3,CPnodeID) = mesh_node0(1:3,CPnodeID) + numerics_unitlength * dispt(1:3,node) enddo endif theTime = cptim ! record current starting time theDelta = timinc ! record current time increment theInc = inc ! record current increment number lastMode = calcMode(nn,cp_en) ! record calculationMode endif call CPFEM_general(computationMode,ffn,ffn1,t(1),timinc,m(1),nn,stress,ddsdde) ! Mandel: 11, 22, 33, SQRT(2)*12, SQRT(2)*23, SQRT(2)*13 ! Marc: 11, 22, 33, 12, 23, 13 ! Marc: 11, 22, 33, 12 forall(i=1:ngens) d(1:ngens,i) = invnrmMandel(i)*ddsdde(1:ngens,i)*invnrmMandel(1:ngens) s(1:ndi+nshear) = stress(1:ndi+nshear)*invnrmMandel(1:ndi+nshear) g = 0.0_pReal if(symmetricSolver) d = 0.5_pReal*(d+transpose(d)) !$ call omp_set_num_threads(defaultNumThreadsInt) ! reset number of threads to stored default value end subroutine hypela2 !-------------------------------------------------------------------------------------------------- !> @brief sets user defined output variables for Marc !> @details select a variable contour plotting (user subroutine). !-------------------------------------------------------------------------------------------------- subroutine plotv(v,s,sp,etot,eplas,ecreep,t,m,nn,layer,ndi,nshear,jpltcd) use prec, only: & pReal, & pInt use mesh, only: & mesh_FEasCP use IO, only: & IO_error use homogenization, only: & materialpoint_results,& materialpoint_sizeResults implicit none integer(pInt), intent(in) :: & m, & !< element number nn, & !< integration point number layer, & !< layer number ndi, & !< number of direct stress components nshear, & !< number of shear stress components jpltcd !< user variable index real(pReal), dimension(*), intent(in) :: & s, & !< stress array sp, & !< stresses in preferred direction etot, & !< total strain (generalized) eplas, & !< total plastic strain ecreep, & !< total creep strain t !< current temperature real(pReal), intent(out) :: & v !< variable if (jpltcd > materialpoint_sizeResults) call IO_error(700_pInt,jpltcd) ! complain about out of bounds error v = materialpoint_results(jpltcd,nn,mesh_FEasCP('elem', m)) end subroutine plotv