! Copyright 2011 Max-Planck-Institut für Eisenforschung GmbH ! ! This file is part of DAMASK, ! the Düsseldorf Advanced MAterial Simulation Kit. ! ! DAMASK is free software: you can redistribute it and/or modify ! it under the terms of the GNU General Public License as published by ! the Free Software Foundation, either version 3 of the License, or ! (at your option) any later version. ! ! DAMASK is distributed in the hope that it will be useful, ! but WITHOUT ANY WARRANTY; without even the implied warranty of ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ! GNU General Public License for more details. ! ! You should have received a copy of the GNU General Public License ! along with DAMASK. If not, see . ! !############################################################## !* $Id$ !############################################################## MODULE IO !############################################################## CONTAINS !--------------------------- ! function IO_abaqus_assembleInputFile ! function IO_open_file(unit,relPath) ! function IO_open_inputFile(unit, model) ! function IO_open_logFile(unit) ! function IO_hybridIA(Nast,ODFfileName) ! private function hybridIA_reps(dV_V,steps,C) ! function IO_stringPos(line,maxN) ! function IO_stringValue(line,positions,pos) ! function IO_floatValue(line,positions,pos) ! function IO_intValue(line,positions,pos) ! function IO_fixedStringValue(line,ends,pos) ! function IO_fixedFloatValue(line,ends,pos) ! function IO_fixedFloatNoEValue(line,ends,pos) ! function IO_fixedIntValue(line,ends,pos) ! function IO_continousIntValues(unit,maxN) ! function IO_lc(line) ! subroutine IO_lcInplace(line) ! subroutine IO_error(ID) ! subroutine IO_warning(ID) !--------------------------- !******************************************************************** ! output version number !******************************************************************** subroutine IO_init () !$OMP CRITICAL (write2out) write(6,*) write(6,*) '<<<+- IO init -+>>>' write(6,*) '$Id$' write(6,*) call flush(6) !$OMP END CRITICAL (write2out) return endsubroutine !******************************************************************** ! AP: 12.07.10 ! create a new input file for abaqus simulations ! by removing all comment lines and including "include"s !******************************************************************** recursive function IO_abaqus_assembleInputFile(unit1,unit2) result(createSuccess) use prec use DAMASK_interface implicit none character(len=300) line,fname integer(pInt), intent(in) :: unit1, unit2 logical createSuccess,fexist do read(unit2,'(A300)',END=220) line line = IO_lc(trim(line)) ! call IO_lcInPlace(line) if (line(1:8)=='*include') then fname = trim(getSolverWorkingDirectoryName())//trim(line(9+scan(line(9:),'='):)) inquire(file=fname, exist=fexist) if (.not.(fexist)) then !$OMP CRITICAL (write2out) write(6,*)'ERROR: file does not exist error in IO_abaqus_assembleInputFile' write(6,*)'filename: ', trim(fname) !$OMP END CRITICAL (write2out) createSuccess = .false. return endif open(unit2+1,err=200,status='old',file=fname) if (IO_abaqus_assembleInputFile(unit1,unit2+1)) then createSuccess=.true. close(unit2+1) else createSuccess=.false. return endif else if (line(1:2) /= '**') then write(unit1,'(A)') trim(line) endif enddo 220 createSuccess = .true. return 200 createSuccess =.false. return end function !*********************************************************** ! check if the input file for Abaqus contains part info !*********************************************************** function IO_abaqus_hasNoPart(unit) use prec, only: pInt implicit none integer(pInt) unit integer(pInt), parameter :: maxNchunks = 1 integer(pInt), dimension(1+2*maxNchunks) :: pos logical IO_abaqus_hasNoPart character(len=300) line IO_abaqus_hasNoPart = .true. 610 FORMAT(A300) rewind(unit) do read(unit,610,END=620) line pos = IO_stringPos(line,maxNchunks) if (IO_lc(IO_stringValue(line,pos,1)) == '*part' ) then IO_abaqus_hasNoPart = .false. exit endif enddo 620 return endfunction !******************************************************************** ! open existing file to given unit ! path to file is relative to working directory !******************************************************************** logical function IO_open_file(unit,relPath) use prec, only: pInt use DAMASK_interface implicit none character(len=*), parameter :: pathSep = achar(47)//achar(92) ! forward and backward slash character(len=*) relPath integer(pInt) unit IO_open_file = .false. open(unit,status='old',err=100,file=trim(getSolverWorkingDirectoryName())//relPath) IO_open_file = .true. 100 return endfunction !******************************************************************** ! open FEM inputfile to given unit ! AP: 12.07.10 ! : changed the function to open *.inp_assembly, which is basically ! the input file without comment lines and possibly assembled includes !******************************************************************** logical function IO_open_inputFile(unit,model) use prec, only: pReal, pInt use DAMASK_interface implicit none integer(pInt), intent(in) :: unit character(len=*) model IO_open_inputFile = .false. if (FEsolver == 'Abaqus') then open(unit+1,status='old',err=100,& file=trim(getSolverWorkingDirectoryName())//& trim(model)//InputFileExtension) open(unit,err=100,file=trim(getSolverWorkingDirectoryName())//& trim(model)//InputFileExtension//'_assembly') IO_open_inputFile = IO_abaqus_assembleInputFile(unit,unit+1) ! strip comments and concatenate any "include"s close(unit+1) else open(unit,status='old',err=100,file=trim(getSolverWorkingDirectoryName())//& trim(model)//InputFileExtension) IO_open_inputFile = .true. endif 100 return endfunction !******************************************************************** ! open FEM logfile to given unit !******************************************************************** logical function IO_open_logFile(unit) use prec, only: pReal, pInt use DAMASK_interface implicit none integer(pInt), intent(in) :: unit IO_open_logFile = .false. open(unit,status='old',err=100,file=trim(getSolverWorkingDirectoryName())//& trim(getSolverJobName())//LogFileExtension) IO_open_logFile = .true. 100 return endfunction !******************************************************************** ! open (write) file related to current job ! but with different extension to given unit !******************************************************************** logical function IO_open_jobFile(unit,newExt) use prec, only: pReal, pInt use DAMASK_interface implicit none integer(pInt), intent(in) :: unit character(*), intent(in) :: newExt IO_open_jobFile = .false. open(unit,status='replace',err=100,file=trim(getSolverWorkingDirectoryName())//& trim(getSolverJobName())//'.'//newExt) IO_open_jobFile = .true. 100 return endfunction !******************************************************************** ! open (write) binary file related to current job ! but with different extension to given unit !******************************************************************** logical function IO_write_jobBinaryFile(unit,newExt,recMultiplier) use prec, only: pReal, pInt use DAMASK_interface implicit none integer(pInt), intent(in) :: unit integer(pInt), intent(in), optional :: recMultiplier character(*), intent(in) :: newExt IO_write_jobBinaryFile = .false. if (present(recMultiplier)) then open(unit,status='replace',form='unformatted',access='direct',recl=pReal*recMultiplier, & err=100,file=trim(getSolverWorkingDirectoryName())//& trim(getSolverJobName())//'.'//newExt) else open(unit,status='replace',form='unformatted',access='direct',recl=pReal, & err=100,file=trim(getSolverWorkingDirectoryName())//& trim(getSolverJobName())//'.'//newExt) endif IO_write_jobBinaryFile = .true. 100 return endfunction !******************************************************************** ! open (read) binary file related to restored job ! and with different extension to given unit !******************************************************************** logical function IO_read_jobBinaryFile(unit,newExt,jobName,recMultiplier) use prec, only: pReal, pInt use DAMASK_interface implicit none integer(pInt), intent(in) :: unit integer(pInt), intent(in), optional :: recMultiplier character(*), intent(in) :: newExt, jobName IO_read_jobBinaryFile = .false. if (present(recMultiplier)) then open(unit,status='old',form='unformatted',access='direct',recl=pReal*recMultiplier, & err=100,file=trim(getSolverWorkingDirectoryName())//& trim(jobName)//'.'//newExt) else open(unit,status='old',form='unformatted',access='direct',recl=pReal, & err=100,file=trim(getSolverWorkingDirectoryName())//& trim(jobName)//'.'//newExt) endif IO_read_jobBinaryFile = .true. 100 return endfunction !******************************************************************** ! hybrid IA repetition counter !******************************************************************** function hybridIA_reps(dV_V,steps,C) use prec, only: pReal, pInt implicit none integer(pInt), intent(in), dimension(3) :: steps integer(pInt) hybridIA_reps, phi1,Phi,phi2 real(pReal), intent(in), dimension(steps(3),steps(2),steps(1)) :: dV_V real(pReal), intent(in) :: C hybridIA_reps = 0_pInt do phi1=1,steps(1) do Phi =1,steps(2) do phi2=1,steps(3) hybridIA_reps = hybridIA_reps+nint(C*dV_V(phi2,Phi,phi1), pInt) enddo enddo enddo return endfunction !******************************************************************** ! hybrid IA sampling of ODFfile !******************************************************************** function IO_hybridIA(Nast,ODFfileName) use prec, only: pReal, pInt implicit none real(pReal), parameter :: pi = 3.14159265358979323846264338327950288419716939937510_pReal real(pReal), parameter :: inRad = pi/180.0_pReal character(len=*) ODFfileName character(len=80) line character(len=*), parameter :: fileFormat = '(A80)' integer(pInt) i,j,bin,Nast,NnonZero,Nset,Nreps,reps,phi1,Phi,phi2 integer(pInt), dimension(7) :: pos integer(pInt), dimension(3) :: steps integer(pInt), dimension(:), allocatable :: binSet real(pReal) center,sum_dV_V,prob,dg_0,C,lowerC,upperC,rnd real(pReal), dimension(3) :: limits,deltas real(pReal), dimension(:,:,:), allocatable :: dV_V real(pReal), dimension(3,Nast) :: IO_hybridIA if (.not. IO_open_file(999,ODFfileName)) goto 100 !--- parse header of ODF file --- !--- limits in phi1, Phi, phi2 --- read(999,fmt=fileFormat,end=100) line pos = IO_stringPos(line,3) if (pos(1).ne.3) goto 100 do i=1,3 limits(i) = IO_intValue(line,pos,i)*inRad enddo !--- deltas in phi1, Phi, phi2 --- read(999,fmt=fileFormat,end=100) line pos = IO_stringPos(line,3) if (pos(1).ne.3) goto 100 do i=1,3 deltas(i) = IO_intValue(line,pos,i)*inRad enddo steps = nint(limits/deltas,pInt) allocate(dV_V(steps(3),steps(2),steps(1))) !--- box boundary/center at origin? --- read(999,fmt=fileFormat,end=100) line if (index(IO_lc(line),'bound')>0) then center = 0.5_pReal else center = 0.0_pReal endif !--- skip blank line --- read(999,fmt=fileFormat,end=100) line sum_dV_V = 0.0_pReal dV_V = 0.0_pReal dg_0 = deltas(1)*deltas(3)*2.0_pReal*sin(deltas(2)/2.0_pReal) NnonZero = 0_pInt do phi1=1,steps(1) do Phi=1,steps(2) do phi2=1,steps(3) read(999,fmt=*,end=100) prob if (prob > 0.0_pReal) then NnonZero = NnonZero+1 sum_dV_V = sum_dV_V+prob else prob = 0.0_pReal endif dV_V(phi2,Phi,phi1) = prob*dg_0*sin((Phi-1.0_pReal+center)*deltas(2)) enddo enddo enddo dV_V = dV_V/sum_dV_V ! normalize to 1 !--- now fix bounds --- Nset = max(Nast,NnonZero) ! if less than non-zero voxel count requested, sample at least that much lowerC = 0.0_pReal upperC = real(Nset, pReal) do while (hybridIA_reps(dV_V,steps,upperC) < Nset) lowerC = upperC upperC = upperC*2.0_pReal enddo !--- binary search for best C --- do C = (upperC+lowerC)/2.0_pReal Nreps = hybridIA_reps(dV_V,steps,C) if (abs(upperC-lowerC) < upperC*1.0e-14_pReal) then C = upperC Nreps = hybridIA_reps(dV_V,steps,C) exit elseif (Nreps < Nset) then lowerC = C elseif (Nreps > Nset) then upperC = C else exit endif enddo allocate(binSet(Nreps)) bin = 0 ! bin counter i = 1 ! set counter do phi1=1,steps(1) do Phi=1,steps(2) do phi2=1,steps(3) reps = nint(C*dV_V(phi2,Phi,phi1), pInt) binSet(i:i+reps-1) = bin bin = bin+1 ! advance bin i = i+reps ! advance set enddo enddo enddo do i=1,Nast if (i < Nast) then call random_number(rnd) j = nint(rnd*(Nreps-i)+i+0.5_pReal,pInt) else j = i endif bin = binSet(j) IO_hybridIA(1,i) = deltas(1)*(mod(bin/(steps(3)*steps(2)),steps(1))+center) ! phi1 IO_hybridIA(2,i) = deltas(2)*(mod(bin/ steps(3) ,steps(2))+center) ! Phi IO_hybridIA(3,i) = deltas(3)*(mod(bin ,steps(3))+center) ! phi2 binSet(j) = binSet(i) enddo close(999) return ! on error 100 IO_hybridIA = -1 close(999) return endfunction !******************************************************************** ! identifies lines without content !******************************************************************** pure function IO_isBlank (line) use prec, only: pInt implicit none character(len=*), intent(in) :: line character(len=*), parameter :: blank = achar(32)//achar(9)//achar(10)//achar(13) ! whitespaces character(len=*), parameter :: comment = achar(35) ! comment id '#' integer(pInt) posNonBlank, posComment logical IO_isBlank posNonBlank = verify(line,blank) posComment = scan(line,comment) IO_isBlank = posNonBlank == 0 .or. posNonBlank == posComment return endfunction !******************************************************************** ! get tagged content of line !******************************************************************** pure function IO_getTag (line,openChar,closechar) use prec, only: pInt implicit none character(len=*), intent(in) :: line,openChar,closeChar character(len=*), parameter :: sep=achar(32)//achar(9)//achar(10)//achar(13) ! whitespaces character(len=len_trim(line)) IO_getTag integer(pInt) left,right IO_getTag = '' left = scan(line,openChar) right = scan(line,closeChar) if (left == verify(line,sep) .and. right > left) & ! openChar is first and closeChar occurs IO_getTag = line(left+1:right-1) return endfunction !********************************************************************* function IO_countSections(file,part) !********************************************************************* use prec, only: pInt implicit none !* Definition of variables integer(pInt), intent(in) :: file character(len=*), intent(in) :: part integer(pInt) IO_countSections character(len=1024) line IO_countSections = 0 line = '' rewind(file) do while (IO_getTag(line,'<','>') /= part) ! search for part read(file,'(a1024)',END=100) line enddo do read(file,'(a1024)',END=100) line if (IO_isBlank(line)) cycle ! skip empty lines if (IO_getTag(line,'<','>') /= '') exit ! stop at next part if (IO_getTag(line,'[',']') /= '') & ! found [section] identifier IO_countSections = IO_countSections + 1 enddo 100 return endfunction !********************************************************************* ! return array of myTag counts within for at most N[sections] !********************************************************************* function IO_countTagInPart(file,part,myTag,Nsections) use prec, only: pInt implicit none !* Definition of variables integer(pInt), intent(in) :: file, Nsections character(len=*), intent(in) :: part, myTag integer(pInt), dimension(Nsections) :: IO_countTagInPart, counter integer(pInt), parameter :: maxNchunks = 1 integer(pInt), dimension(1+2*maxNchunks) :: positions integer(pInt) section character(len=1024) line,tag counter = 0_pInt section = 0_pInt line = '' rewind(file) do while (IO_getTag(line,'<','>') /= part) ! search for part read(file,'(a1024)',END=100) line enddo do read(file,'(a1024)',END=100) line if (IO_isBlank(line)) cycle ! skip empty lines if (IO_getTag(line,'<','>') /= '') exit ! stop at next part if (IO_getTag(line,'[',']') /= '') & ! found [section] identifier section = section + 1 if (section > 0) then positions = IO_stringPos(line,maxNchunks) tag = IO_lc(IO_stringValue(line,positions,1)) ! extract key if (tag == myTag) & ! match counter(section) = counter(section) + 1 endif enddo 100 IO_countTagInPart = counter return endfunction !********************************************************************* ! return array of myTag presence within for at most N[sections] !********************************************************************* function IO_spotTagInPart(file,part,myTag,Nsections) use prec, only: pInt implicit none !* Definition of variables integer(pInt), intent(in) :: file, Nsections character(len=*), intent(in) :: part, myTag logical, dimension(Nsections) :: IO_spotTagInPart integer(pInt), parameter :: maxNchunks = 1 integer(pInt), dimension(1+2*maxNchunks) :: positions integer(pInt) section character(len=1024) line,tag IO_spotTagInPart = .false. ! assume to nowhere spot tag section = 0_pInt line = '' rewind(file) do while (IO_getTag(line,'<','>') /= part) ! search for part read(file,'(a1024)',END=100) line enddo do read(file,'(a1024)',END=100) line if (IO_isBlank(line)) cycle ! skip empty lines if (IO_getTag(line,'<','>') /= '') exit ! stop at next part if (IO_getTag(line,'[',']') /= '') & ! found [section] identifier section = section + 1 if (section > 0) then positions = IO_stringPos(line,maxNchunks) tag = IO_lc(IO_stringValue(line,positions,1)) ! extract key if (tag == myTag) & ! match IO_spotTagInPart(section) = .true. endif enddo 100 return endfunction !******************************************************************** ! locate at most N space-separated parts in line ! return array containing number of parts in line and ! the left/right positions of at most N to be used by IO_xxxVal !******************************************************************** ! pure function IO_stringPos (line,N) function IO_stringPos (line,N) use prec, only: pReal,pInt implicit none character(len=*), intent(in) :: line character(len=*), parameter :: sep=achar(44)//achar(32)//achar(9)//achar(10)//achar(13) ! comma and whitespaces integer(pInt), intent(in) :: N integer(pInt) left,right integer(pInt) IO_stringPos(1+N*2) IO_stringPos = -1 IO_stringPos(1) = 0 right = 0 do while (verify(line(right+1:),sep)>0) left = right + verify(line(right+1:),sep) right = left + scan(line(left:),sep) - 2 if ( line(left:left) == '#' ) then exit endif if ( IO_stringPos(1) 1) then read(UNIT=line(ends(pos)+1:ends(pos)+pos_exp-1),ERR=100,FMT=*) base read(UNIT=line(ends(pos)+pos_exp:ends(pos+1)),ERR=100,FMT=*) expon else read(UNIT=line(ends(pos)+1:ends(pos+1)),ERR=100,FMT=*) base expon = 0_pInt endif IO_fixedNoEFloatValue = base*10.0_pReal**expon return 100 IO_fixedNoEFloatValue = huge(1.0_pReal) return endfunction !******************************************************************** ! read int value at pos from line !******************************************************************** pure function IO_intValue (line,positions,pos) use prec, only: pReal,pInt implicit none character(len=*), intent(in) :: line integer(pInt), intent(in) :: positions(*),pos integer(pInt) IO_intValue if (positions(1) < pos) then IO_intValue = 0_pInt else read(UNIT=line(positions(pos*2):positions(pos*2+1)),ERR=100,FMT=*) IO_intValue endif return 100 IO_intValue = huge(1_pInt) return endfunction !******************************************************************** ! read int value at pos from fixed format line !******************************************************************** pure function IO_fixedIntValue (line,ends,pos) use prec, only: pReal,pInt implicit none character(len=*), intent(in) :: line integer(pInt), intent(in) :: ends(*),pos integer(pInt) IO_fixedIntValue read(UNIT=line(ends(pos)+1:ends(pos+1)),ERR=100,FMT=*) IO_fixedIntValue return 100 IO_fixedIntValue = huge(1_pInt) return endfunction !******************************************************************** ! change character in line to lower case !******************************************************************** pure function IO_lc (line) use prec, only: pInt implicit none character (len=*), intent(in) :: line character (len=len(line)) IO_lc integer(pInt) i IO_lc = line do i=1,len(line) if(64 0) read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) remainingChunks = remainingChunks - pos(1) enddo 100 return endsubroutine !******************************************************************** ! extract value from key=value pair and check whether key matches !******************************************************************** pure function IO_extractValue (line,key) use prec, only: pReal,pInt implicit none character(len=*), intent(in) :: line,key character(len=*), parameter :: sep = achar(61) ! '=' integer(pInt) pos character(len=300) IO_extractValue IO_extractValue = '' pos = scan(line,sep) if (pos > 0 .and. line(:pos-1) == key(:pos-1)) & ! key matches expected key IO_extractValue = line(pos+1:) ! extract value return endfunction !******************************************************************** ! count lines containig data up to next *keyword ! AP: changed the function to neglect comment lines between keyword definitions. ! : is not changed back to the original version since *.inp_assembly does not ! : contain any comment lines (12.07.2010) !******************************************************************** function IO_countDataLines (unit) use prec, only: pReal,pInt implicit none integer(pInt) IO_countDataLines,unit integer(pInt), parameter :: maxNchunks = 1 integer(pInt), dimension(1+2*maxNchunks) :: pos character(len=300) line,tmp IO_countDataLines = 0 do read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) tmp = IO_lc(IO_stringValue(line,pos,1)) if (tmp(1:1) == '*' .and. tmp(2:2) /= '*') then ! found keyword exit else if (tmp(2:2) /= '*') IO_countDataLines = IO_countDataLines + 1_pInt endif enddo 100 backspace(unit) return endfunction !******************************************************************** ! count items in consecutive lines ! Marc: ints concatenated by "c" as last char or range of values a "to" b ! Abaqus: triplet of start,stop,inc !******************************************************************** function IO_countContinousIntValues (unit) use DAMASK_interface use prec, only: pReal,pInt implicit none integer(pInt) unit,l,count integer(pInt) IO_countContinousIntValues integer(pInt), parameter :: maxNchunks = 64 integer(pInt), dimension(1+2*maxNchunks) :: pos character(len=300) line IO_countContinousIntValues = 0_pInt select case (FEsolver) case ('Marc') do read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) if (IO_lc(IO_stringValue(line,pos,2)) == 'to' ) then ! found range indicator IO_countContinousIntValues = 1 + IO_intValue(line,pos,3) - IO_intValue(line,pos,1) exit ! only one single range indicator allowed else IO_countContinousIntValues = IO_countContinousIntValues+pos(1)-1 ! add line's count when assuming 'c' if ( IO_lc(IO_stringValue(line,pos,pos(1))) /= 'c' ) then ! line finished, read last value IO_countContinousIntValues = IO_countContinousIntValues+1 exit ! data ended endif endif enddo case('Abaqus') count = IO_countDataLines(unit) do l = 1,count backspace(unit) enddo do l = 1,count read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) IO_countContinousIntValues = IO_countContinousIntValues + 1 + & ! assuming range generation (IO_intValue(line,pos,2)-IO_intValue(line,pos,1))/max(1,IO_intValue(line,pos,3)) enddo endselect 100 return endfunction !******************************************************************** ! return integer list corrsponding to items in consecutive lines ! Marc: ints concatenated by "c" as last char, range of a "to" b, or named set ! Abaqus: triplet of start,stop,inc or named set !******************************************************************** function IO_continousIntValues (unit,maxN,lookupName,lookupMap,lookupMaxN) use DAMASK_interface use prec, only: pReal,pInt implicit none integer(pInt) unit,maxN,i,j,l,count,first,last integer(pInt), dimension(1+maxN) :: IO_continousIntValues integer(pInt), parameter :: maxNchunks = 64 integer(pInt), dimension(1+2*maxNchunks) :: pos character(len=64), dimension(:) :: lookupName integer(pInt) :: lookupMaxN integer(pInt), dimension(:,:) :: lookupMap character(len=300) line logical rangeGeneration IO_continousIntValues = 0 rangeGeneration = .false. select case (FEsolver) case ('Marc') do read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) if (verify(IO_stringValue(line,pos,1),"0123456789") > 0) then ! a non-int, i.e. set name do i = 1,lookupMaxN ! loop over known set names if (IO_stringValue(line,pos,1) == lookupName(i)) then ! found matching name IO_continousIntValues = lookupMap(:,i) ! return resp. entity list exit endif enddo exit else if (IO_lc(IO_stringValue(line,pos,2)) == 'to' ) then ! found range indicator do i = IO_intValue(line,pos,1),IO_intValue(line,pos,3) IO_continousIntValues(1) = IO_continousIntValues(1) + 1 IO_continousIntValues(1+IO_continousIntValues(1)) = i enddo exit else do i = 1,pos(1)-1 ! interpret up to second to last value IO_continousIntValues(1) = IO_continousIntValues(1) + 1 IO_continousIntValues(1+IO_continousIntValues(1)) = IO_intValue(line,pos,i) enddo if ( IO_lc(IO_stringValue(line,pos,pos(1))) /= 'c' ) then ! line finished, read last value IO_continousIntValues(1) = IO_continousIntValues(1)+1 IO_continousIntValues(1+IO_continousIntValues(1)) = IO_intValue(line,pos,pos(1)) exit endif endif enddo case('Abaqus') count = IO_countDataLines(unit) do l = 1,count backspace(unit) enddo ! check if the element values in the elset are auto generated backspace(unit) read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) do i = 1,pos(1) if (IO_lc(IO_stringValue(line,pos,i)) == 'generate') rangeGeneration = .true. enddo do l = 1,count read(unit,'(A300)',end=100) line pos = IO_stringPos(line,maxNchunks) if (verify(IO_stringValue(line,pos,1),"0123456789") > 0) then ! a non-int, i.e. set names follow on this line do i = 1,pos(1) ! loop over set names in line do j = 1,lookupMaxN ! look thru known set names if (IO_stringValue(line,pos,i) == lookupName(j)) then ! found matching name first = 2 + IO_continousIntValues(1) ! where to start appending data last = first + lookupMap(1,j) - 1 ! up to where to append data IO_continousIntValues(first:last) = lookupMap(2:1+lookupMap(1,j),j) ! add resp. entity list IO_continousIntValues(1) = IO_continousIntValues(1) + lookupMap(1,j) ! count them endif enddo enddo else if (rangeGeneration) then ! range generation do i = IO_intValue(line,pos,1),IO_intValue(line,pos,2),max(1,IO_intValue(line,pos,3)) IO_continousIntValues(1) = IO_continousIntValues(1) + 1 IO_continousIntValues(1+IO_continousIntValues(1)) = i enddo else ! read individual elem nums do i = 1,pos(1) ! write(*,*)'IO_CIV-int',IO_intValue(line,pos,i) IO_continousIntValues(1) = IO_continousIntValues(1) + 1 IO_continousIntValues(1+IO_continousIntValues(1)) = IO_intValue(line,pos,i) enddo endif enddo endselect 100 return endfunction !******************************************************************** ! write error statements to standard out ! and terminate the Marc run with exit #9xxx ! in ABAQUS either time step is reduced or execution terminated !******************************************************************** subroutine IO_error(ID,e,i,g,ext_msg) use prec, only: pInt implicit none integer(pInt), intent(in) :: ID integer(pInt), optional, intent(in) :: e,i,g character(len=*), optional, intent(in) :: ext_msg character(len=120) msg select case (ID) case (40) msg = 'path rectification error' case (41) msg = 'path too long' case (42) msg = 'missing descriptive information in spectral mesh' case (43) msg = 'resolution error in spectral mesh' case (44) msg = 'dimension error in spectral mesh' case (45) msg = 'error opening spectral loadcase' case (46) msg = 'mask consistency violated in spectral loadcase' case (47) msg = 'negative time increment in spectral loadcase' case (48) msg = 'Non-positive increment in spectral loadcase' case (49) msg = 'Non-positive relative parameter for spectral method' case (50) msg = 'Error writing constitutive output description' case (100) msg = 'Cannot open config file' case (101) msg = 'Cannot open input file' case (102) msg = 'argument count error (mesh and loadcase) for mpie_spectral' case (103) msg = 'Resolution contains odd number' case (104) msg = 'FFTW init error' case (105) msg = 'Error reading from ODF file' case (106) msg = 'Error reading info on old job' case (110) msg = 'No homogenization specified via State Variable 2' case (120) msg = 'No microstructure specified via State Variable 3' case (125) msg = 'No entries in config part' case (130) msg = 'Homogenization index out of bounds' case (140) msg = 'Microstructure index out of bounds' case (150) msg = 'Crystallite index out of bounds' case (155) msg = 'Phase index out of bounds' case (160) msg = 'Texture index out of bounds' case (170) msg = 'Sum of phase fractions differs from 1' case (200) msg = 'Unknown constitution specified' case (201) msg = 'Unknown homogenization specified' case (205) msg = 'Unknown lattice structure encountered' case (210) msg = 'Negative initial resistance' case (211) msg = 'Non-positive reference shear rate' case (212) msg = 'Non-positive stress exponent' case (213) msg = 'Non-positive saturation stress' case (214) msg = 'Zero hardening exponent' case (220) msg = 'Negative initial dislocation density' case (221) msg = 'Negative Bugers vector' case (222) msg = 'Negative activation energy for edge dislocation glide' case (223) msg = 'Negative self diffusion energy' case (224) msg = 'Non-positive diffusion prefactor' case (225) msg = 'No slip systems specified' case (226) msg = 'Non-positive prefactor for dislocation velocity' case (227) msg = 'Non-positive prefactor for mean free path' case (228) msg = 'Non-positive minimum stable dipole distance' case (229) msg = 'Non-positive hardening interaction coefficients' case (230) msg = 'Non-positive atomic volume' case (231) msg = 'Non-positive prefactor for self-diffusion coefficient' case (232) msg = 'Non-positive activation energy' case (233) msg = 'Non-positive relevant dislocation density' case (235) msg = 'Material parameter in nonlocal constitutive phase out of bounds:' case (236) msg = 'Unknown material parameter in nonlocal constitutive phase:' case (237) msg = 'Singularity in internal stress calculation' case (240) msg = 'Non-positive Taylor factor' case (241) msg = 'Non-positive hardening exponent' case (242) msg = 'Non-positive relevant slip resistance' case (260) msg = 'Non-positive relevant strain' case (261) msg = 'Frequency for Stiffness update smaller than zero' case (262) msg = 'Frequency for Jacobian update of Lp residuum smaller than zero' case (263) msg = 'Non-positive perturbation value' case (264) msg = 'Limit for homogenization loop too small' case (265) msg = 'Limit for crystallite loop too small' case (266) msg = 'Limit for state loop too small' case (267) msg = 'Limit for stress loop too small' case (268) msg = 'Non-positive minimum substep size' case (269) msg = 'Non-positive relative tolerance for state' case (270) msg = 'Non-positive relative tolerance for stress' case (271) msg = 'Non-positive absolute tolerance for stress' !* Error messages related to RGC numerical parameters <<>> case (272) msg = 'Non-positive relative tolerance of residual in RGC' case (273) msg = 'Non-positive absolute tolerance of residual in RGC' case (274) msg = 'Non-positive relative maximum of residual in RGC' case (275) msg = 'Non-positive absolute maximum of residual in RGC' case (276) msg = 'Non-positive penalty perturbation in RGC' case (277) msg = 'Non-positive relevant mismatch in RGC' case (278) msg = 'Non-positive definite viscosity model in RGC' case (288) msg = 'Non-positive maximum threshold of relaxation change in RGC' case (289) msg = 'Non-positive definite volume discrepancy penalty in RGC' case (294) msg = 'Non-positive tolerance for deformation gradient' case (298) msg = 'Chosen integration method does not exist' case (299) msg = 'Chosen perturbation method does not exist' case (300) msg = 'This material can only be used with elements with three direct stress components' case (500) msg = 'Unknown lattice type specified' case (550) msg = 'Unknown symmetry type specified' case (600) msg = 'Convergence not reached' case (610) msg = 'Stress loop not converged' case (666) msg = 'Memory leak detected' case (667) msg = 'Invalid materialpoint result requested' case (670) msg = 'math_check: quat -> axisAngle -> quat failed' case (671) msg = 'math_check: quat -> R -> quat failed' case (672) msg = 'math_check: quat -> euler -> quat failed' case (673) msg = 'math_check: R -> euler -> R failed' case (700) msg = 'Singular matrix in stress iteration' case (800) msg = 'Matrix inversion error' ! Error messages related to parsing of Abaqus input file case (900) msg = 'PARSE ERROR: Improper definition of nodes in input file (Nnodes < 2)' case (901) msg = 'PARSE ERROR: No Elements defined in input file (Nelems = 0)' case (902) msg = 'PARSE ERROR: No Element sets defined in input file (Atleast one *Elset must exist)' case (903) msg = 'PARSE ERROR: No Materials defined in input file (Look into section assigments)' case (904) msg = 'PARSE ERROR: No elements could be assigned for Elset: '//ext_msg case (905) msg = 'PARSE ERROR: Error in mesh_abaqus_map_materials' case (906) msg = 'PARSE ERROR: Error in mesh_abaqus_count_cpElements' case (907) msg = 'PARSE ERROR: Incorrect size of mesh_mapFEtoCPelem in mesh_abaqus_map_elements; Size cannot be zero' case (908) msg = 'PARSE ERROR: Incorrect size of mesh_mapFEtoCPnode in mesh_abaqus_map_nodes; Size cannot be zero' case (909) msg = 'PARSE ERROR: Incorrect size of mesh_node in mesh_abaqus_build_nodes; must be equal to mesh_Nnodes' case(910) msg = 'PARSE ERROR: Incorrect element type mapping in '//ext_msg case default msg = 'Unknown error number...' end select !$OMP CRITICAL (write2out) write(6,*) write(6,'(a38)') '+------------------------------------+' write(6,'(a38)') '+ error +' write(6,'(a17,i3,a18)') '+ ',ID,' +' write(6,'(a38)') '+ +' write(6,'(a2,a)') '+ ',msg if (present(ext_msg)) write(6,*) '+ ',ext_msg if (present(e)) then if (present(i) .and. present(g)) then write(6,'(a13,i6,a4,i2,a7,i4,a2)') '+ at element ',e,' IP ',i,' grain ',g,' +' else write(6,'(a18,i6,a14)') '+ at ',e,' +' endif endif write(6,'(a38)') '+------------------------------------+' call flush(6) call quit(9000+ID) !$OMP END CRITICAL (write2out) ! ABAQUS returns in some cases return endsubroutine !******************************************************************** ! write warning statements to standard out !******************************************************************** subroutine IO_warning(ID,e,i,g,ext_msg) use prec, only: pInt implicit none integer(pInt), intent(in) :: ID integer(pInt), optional, intent(in) :: e,i,g character(len=*), optional, intent(in) :: ext_msg character(len=80) msg select case (ID) case (101) msg = '+ crystallite debugging off... +' case (600) msg = '+ crystallite responds elastically +' case (601) msg = '+ stiffness close to zero +' case (650) msg = '+ polar decomposition failed +' case (700) msg = '+ unknown crystal symmetry +' case default msg = '+ unknown warning number... +' end select !$OMP CRITICAL (write2out) write(6,*) write(6,'(a38)') '+------------------------------------+' write(6,'(a38)') '+ warning +' write(6,'(a38)') '+ +' write(6,'(a38)') msg if (present(ext_msg)) write(6,*) '+ ',ext_msg if (present(e)) then if (present(i)) then if (present(g)) then write(6,'(a12,x,i6,x,a2,x,i2,x,a5,x,i4,a2)') '+ at element',e,'IP',i,'grain',g,' +' else write(6,'(a12,x,i6,x,a2,x,i2,a13)') '+ at element',e,'IP',i,' +' endif else write(6,'(a12,x,i6,a19)') '+ at element',e,' +' endif endif write(6,'(a38)') '+------------------------------------+' call flush(6) !$OMP END CRITICAL (write2out) endsubroutine END MODULE IO