!-------------------------------------------------------------------------------------------------- !> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH !> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH !> @author Denny Tjahjanto, Max-Planck-Institut für Eisenforschung GmbH !> @brief homogenization manager, organizing deformation partitioning and stress homogenization !-------------------------------------------------------------------------------------------------- module homogenization use prec, only: & #ifdef FEM tOutputData, & #endif pInt, & pReal !-------------------------------------------------------------------------------------------------- ! General variables for the homogenization at a material point implicit none private real(pReal), dimension(:,:,:,:), allocatable, public :: & materialpoint_F0, & !< def grad of IP at start of FE increment materialpoint_F, & !< def grad of IP to be reached at end of FE increment materialpoint_P !< first P--K stress of IP real(pReal), dimension(:,:,:,:,:,:), allocatable, public :: & materialpoint_dPdF !< tangent of first P--K stress at IP #ifdef FEM type(tOutputData), dimension(:), allocatable, public :: & homogOutput type(tOutputData), dimension(:,:), allocatable, public :: & crystalliteOutput, & phaseOutput #else real(pReal), dimension(:,:,:), allocatable, public :: & materialpoint_results !< results array of material point #endif integer(pInt), public, protected :: & materialpoint_sizeResults, & homogenization_maxSizePostResults, & thermal_maxSizePostResults, & damage_maxSizePostResults, & vacancyflux_maxSizePostResults, & porosity_maxSizePostResults, & hydrogenflux_maxSizePostResults real(pReal), dimension(:,:,:,:), allocatable, private :: & materialpoint_subF0, & !< def grad of IP at beginning of homogenization increment materialpoint_subF !< def grad of IP to be reached at end of homog inc real(pReal), dimension(:,:), allocatable, private :: & materialpoint_subFrac, & materialpoint_subStep, & materialpoint_subdt logical, dimension(:,:), allocatable, private :: & materialpoint_requested, & materialpoint_converged logical, dimension(:,:,:), allocatable, private :: & materialpoint_doneAndHappy public :: & homogenization_init, & materialpoint_stressAndItsTangent, & materialpoint_postResults private :: & homogenization_partitionDeformation, & homogenization_updateState, & homogenization_averageStressAndItsTangent, & homogenization_postResults contains !-------------------------------------------------------------------------------------------------- !> @brief module initialization !-------------------------------------------------------------------------------------------------- subroutine homogenization_init use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment) use math, only: & math_I3 use debug, only: & debug_level, & debug_homogenization, & debug_levelBasic, & debug_e, & debug_g use mesh, only: & mesh_maxNips, & mesh_NcpElems, & mesh_element, & FE_Nips, & FE_geomtype #ifdef FEM use crystallite, only: & crystallite_sizePostResults #else use constitutive, only: & constitutive_plasticity_maxSizePostResults, & constitutive_source_maxSizePostResults use crystallite, only: & crystallite_maxSizePostResults #endif use material use homogenization_none use homogenization_isostrain use homogenization_RGC use thermal_isothermal use thermal_adiabatic use thermal_conduction use damage_none use damage_local use damage_nonlocal use vacancyflux_isoconc use vacancyflux_isochempot use vacancyflux_cahnhilliard use porosity_none use porosity_phasefield use hydrogenflux_isoconc use hydrogenflux_cahnhilliard use IO use numerics, only: & worldrank implicit none integer(pInt), parameter :: FILEUNIT = 200_pInt integer(pInt) :: e,i,p integer(pInt), dimension(:,:), pointer :: thisSize integer(pInt), dimension(:) , pointer :: thisNoutput character(len=64), dimension(:,:), pointer :: thisOutput character(len=32) :: outputName !< name of output, intermediate fix until HDF5 output is ready logical :: knownHomogenization, knownThermal, knownDamage, knownVacancyflux, knownPorosity, knownHydrogenflux !-------------------------------------------------------------------------------------------------- ! open material.config if (.not. IO_open_jobFile_stat(FILEUNIT,material_localFileExt)) & ! no local material configuration present... call IO_open_file(FILEUNIT,material_configFile) ! ... open material.config file !-------------------------------------------------------------------------------------------------- ! parse homogenization from config file if (any(homogenization_type == HOMOGENIZATION_NONE_ID)) & call homogenization_none_init() if (any(homogenization_type == HOMOGENIZATION_ISOSTRAIN_ID)) & call homogenization_isostrain_init(FILEUNIT) if (any(homogenization_type == HOMOGENIZATION_RGC_ID)) & call homogenization_RGC_init(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! parse thermal from config file call IO_checkAndRewind(FILEUNIT) if (any(thermal_type == THERMAL_isothermal_ID)) & call thermal_isothermal_init() if (any(thermal_type == THERMAL_adiabatic_ID)) & call thermal_adiabatic_init(FILEUNIT) if (any(thermal_type == THERMAL_conduction_ID)) & call thermal_conduction_init(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! parse damage from config file call IO_checkAndRewind(FILEUNIT) if (any(damage_type == DAMAGE_none_ID)) & call damage_none_init() if (any(damage_type == DAMAGE_local_ID)) & call damage_local_init(FILEUNIT) if (any(damage_type == DAMAGE_nonlocal_ID)) & call damage_nonlocal_init(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! parse vacancy transport from config file call IO_checkAndRewind(FILEUNIT) if (any(vacancyflux_type == VACANCYFLUX_isoconc_ID)) & call vacancyflux_isoconc_init() if (any(vacancyflux_type == VACANCYFLUX_isochempot_ID)) & call vacancyflux_isochempot_init(FILEUNIT) if (any(vacancyflux_type == VACANCYFLUX_cahnhilliard_ID)) & call vacancyflux_cahnhilliard_init(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! parse porosity from config file call IO_checkAndRewind(FILEUNIT) if (any(porosity_type == POROSITY_none_ID)) & call porosity_none_init() if (any(porosity_type == POROSITY_phasefield_ID)) & call porosity_phasefield_init(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! parse hydrogen transport from config file call IO_checkAndRewind(FILEUNIT) if (any(hydrogenflux_type == HYDROGENFLUX_isoconc_ID)) & call hydrogenflux_isoconc_init() if (any(hydrogenflux_type == HYDROGENFLUX_cahnhilliard_ID)) & call hydrogenflux_cahnhilliard_init(FILEUNIT) close(FILEUNIT) !-------------------------------------------------------------------------------------------------- ! write description file for homogenization output mainProcess2: if (worldrank == 0) then call IO_write_jobFile(FILEUNIT,'outputHomogenization') do p = 1,material_Nhomogenization if (any(material_homog == p)) then i = homogenization_typeInstance(p) ! which instance of this homogenization type knownHomogenization = .true. ! assume valid select case(homogenization_type(p)) ! split per homogenization type case (HOMOGENIZATION_NONE_ID) outputName = HOMOGENIZATION_NONE_label thisNoutput => null() thisOutput => null() thisSize => null() case (HOMOGENIZATION_ISOSTRAIN_ID) outputName = HOMOGENIZATION_ISOSTRAIN_label thisNoutput => homogenization_isostrain_Noutput thisOutput => homogenization_isostrain_output thisSize => homogenization_isostrain_sizePostResult case (HOMOGENIZATION_RGC_ID) outputName = HOMOGENIZATION_RGC_label thisNoutput => homogenization_RGC_Noutput thisOutput => homogenization_RGC_output thisSize => homogenization_RGC_sizePostResult case default knownHomogenization = .false. end select write(FILEUNIT,'(/,a,/)') '['//trim(homogenization_name(p))//']' if (knownHomogenization) then write(FILEUNIT,'(a)') '(type)'//char(9)//trim(outputName) write(FILEUNIT,'(a,i4)') '(ngrains)'//char(9),homogenization_Ngrains(p) if (homogenization_type(p) /= HOMOGENIZATION_NONE_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif i = thermal_typeInstance(p) ! which instance of this thermal type knownThermal = .true. ! assume valid select case(thermal_type(p)) ! split per thermal type case (THERMAL_isothermal_ID) outputName = THERMAL_isothermal_label thisNoutput => null() thisOutput => null() thisSize => null() case (THERMAL_adiabatic_ID) outputName = THERMAL_adiabatic_label thisNoutput => thermal_adiabatic_Noutput thisOutput => thermal_adiabatic_output thisSize => thermal_adiabatic_sizePostResult case (THERMAL_conduction_ID) outputName = THERMAL_conduction_label thisNoutput => thermal_conduction_Noutput thisOutput => thermal_conduction_output thisSize => thermal_conduction_sizePostResult case default knownThermal = .false. end select if (knownThermal) then write(FILEUNIT,'(a)') '(thermal)'//char(9)//trim(outputName) if (thermal_type(p) /= THERMAL_isothermal_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif i = damage_typeInstance(p) ! which instance of this damage type knownDamage = .true. ! assume valid select case(damage_type(p)) ! split per damage type case (DAMAGE_none_ID) outputName = DAMAGE_none_label thisNoutput => null() thisOutput => null() thisSize => null() case (DAMAGE_local_ID) outputName = DAMAGE_local_label thisNoutput => damage_local_Noutput thisOutput => damage_local_output thisSize => damage_local_sizePostResult case (DAMAGE_nonlocal_ID) outputName = DAMAGE_nonlocal_label thisNoutput => damage_nonlocal_Noutput thisOutput => damage_nonlocal_output thisSize => damage_nonlocal_sizePostResult case default knownDamage = .false. end select if (knownDamage) then write(FILEUNIT,'(a)') '(damage)'//char(9)//trim(outputName) if (damage_type(p) /= DAMAGE_none_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif i = vacancyflux_typeInstance(p) ! which instance of this vacancy flux type knownVacancyflux = .true. ! assume valid select case(vacancyflux_type(p)) ! split per vacancy flux type case (VACANCYFLUX_isoconc_ID) outputName = VACANCYFLUX_isoconc_label thisNoutput => null() thisOutput => null() thisSize => null() case (VACANCYFLUX_isochempot_ID) outputName = VACANCYFLUX_isochempot_label thisNoutput => vacancyflux_isochempot_Noutput thisOutput => vacancyflux_isochempot_output thisSize => vacancyflux_isochempot_sizePostResult case (VACANCYFLUX_cahnhilliard_ID) outputName = VACANCYFLUX_cahnhilliard_label thisNoutput => vacancyflux_cahnhilliard_Noutput thisOutput => vacancyflux_cahnhilliard_output thisSize => vacancyflux_cahnhilliard_sizePostResult case default knownVacancyflux = .false. end select if (knownVacancyflux) then write(FILEUNIT,'(a)') '(vacancyflux)'//char(9)//trim(outputName) if (vacancyflux_type(p) /= VACANCYFLUX_isoconc_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif i = porosity_typeInstance(p) ! which instance of this porosity type knownPorosity = .true. ! assume valid select case(porosity_type(p)) ! split per porosity type case (POROSITY_none_ID) outputName = POROSITY_none_label thisNoutput => null() thisOutput => null() thisSize => null() case (POROSITY_phasefield_ID) outputName = POROSITY_phasefield_label thisNoutput => porosity_phasefield_Noutput thisOutput => porosity_phasefield_output thisSize => porosity_phasefield_sizePostResult case default knownPorosity = .false. end select if (knownPorosity) then write(FILEUNIT,'(a)') '(porosity)'//char(9)//trim(outputName) if (porosity_type(p) /= POROSITY_none_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif i = hydrogenflux_typeInstance(p) ! which instance of this hydrogen flux type knownHydrogenflux = .true. ! assume valid select case(hydrogenflux_type(p)) ! split per hydrogen flux type case (HYDROGENFLUX_isoconc_ID) outputName = HYDROGENFLUX_isoconc_label thisNoutput => null() thisOutput => null() thisSize => null() case (HYDROGENFLUX_cahnhilliard_ID) outputName = HYDROGENFLUX_cahnhilliard_label thisNoutput => hydrogenflux_cahnhilliard_Noutput thisOutput => hydrogenflux_cahnhilliard_output thisSize => hydrogenflux_cahnhilliard_sizePostResult case default knownHydrogenflux = .false. end select if (knownHydrogenflux) then write(FILEUNIT,'(a)') '(hydrogenflux)'//char(9)//trim(outputName) if (hydrogenflux_type(p) /= HYDROGENFLUX_isoconc_ID) then do e = 1,thisNoutput(i) write(FILEUNIT,'(a,i4)') trim(thisOutput(e,i))//char(9),thisSize(e,i) enddo endif endif endif enddo close(FILEUNIT) endif mainProcess2 !-------------------------------------------------------------------------------------------------- ! allocate and initialize global variables allocate(materialpoint_dPdF(3,3,3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_F0(3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) materialpoint_F0 = spread(spread(math_I3,3,mesh_maxNips),4,mesh_NcpElems) ! initialize to identity allocate(materialpoint_F(3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) materialpoint_F = materialpoint_F0 ! initialize to identity allocate(materialpoint_subF0(3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_subF(3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_P(3,3,mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_subFrac(mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_subStep(mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_subdt(mesh_maxNips,mesh_NcpElems), source=0.0_pReal) allocate(materialpoint_requested(mesh_maxNips,mesh_NcpElems), source=.false.) allocate(materialpoint_converged(mesh_maxNips,mesh_NcpElems), source=.true.) allocate(materialpoint_doneAndHappy(2,mesh_maxNips,mesh_NcpElems), source=.true.) !-------------------------------------------------------------------------------------------------- ! allocate and initialize global state and postresutls variables homogenization_maxSizePostResults = 0_pInt thermal_maxSizePostResults = 0_pInt damage_maxSizePostResults = 0_pInt vacancyflux_maxSizePostResults = 0_pInt porosity_maxSizePostResults = 0_pInt hydrogenflux_maxSizePostResults = 0_pInt do p = 1,material_Nhomogenization homogenization_maxSizePostResults = max(homogenization_maxSizePostResults,homogState (p)%sizePostResults) thermal_maxSizePostResults = max(thermal_maxSizePostResults, thermalState (p)%sizePostResults) damage_maxSizePostResults = max(damage_maxSizePostResults ,damageState (p)%sizePostResults) vacancyflux_maxSizePostResults = max(vacancyflux_maxSizePostResults ,vacancyfluxState (p)%sizePostResults) porosity_maxSizePostResults = max(porosity_maxSizePostResults ,porosityState (p)%sizePostResults) hydrogenflux_maxSizePostResults = max(hydrogenflux_maxSizePostResults ,hydrogenfluxState(p)%sizePostResults) enddo #ifdef FEM allocate(homogOutput (material_Nhomogenization )) allocate(crystalliteOutput(material_Ncrystallite, homogenization_maxNgrains)) allocate(phaseOutput (material_Nphase, homogenization_maxNgrains)) do p = 1, material_Nhomogenization homogOutput(p)%sizeResults = homogState (p)%sizePostResults + & thermalState (p)%sizePostResults + & damageState (p)%sizePostResults + & vacancyfluxState (p)%sizePostResults + & porosityState (p)%sizePostResults + & hydrogenfluxState(p)%sizePostResults homogOutput(p)%sizeIpCells = count(material_homog==p) allocate(homogOutput(p)%output(homogOutput(p)%sizeResults,homogOutput(p)%sizeIpCells)) enddo do p = 1, material_Ncrystallite; do e = 1, homogenization_maxNgrains crystalliteOutput(p,e)%sizeResults = crystallite_sizePostResults(p) crystalliteOutput(p,e)%sizeIpCells = count(microstructure_crystallite(mesh_element(4,:)) == p .and. & homogenization_Ngrains (mesh_element(3,:)) >= e)*mesh_maxNips allocate(crystalliteOutput(p,e)%output(crystalliteOutput(p,e)%sizeResults,crystalliteOutput(p,e)%sizeIpCells)) enddo; enddo do p = 1, material_Nphase; do e = 1, homogenization_maxNgrains phaseOutput(p,e)%sizeResults = plasticState (p)%sizePostResults + & sum(sourceState (p)%p(:)%sizePostResults) phaseOutput(p,e)%sizeIpCells = count(material_phase(e,:,:) == p) allocate(phaseOutput(p,e)%output(phaseOutput(p,e)%sizeResults,phaseOutput(p,e)%sizeIpCells)) enddo; enddo #else materialpoint_sizeResults = 1 & ! grain count + 1 + homogenization_maxSizePostResults & ! homogSize & homogResult + thermal_maxSizePostResults & + damage_maxSizePostResults & + vacancyflux_maxSizePostResults & + porosity_maxSizePostResults & + hydrogenflux_maxSizePostResults & + homogenization_maxNgrains * (1 + crystallite_maxSizePostResults & ! crystallite size & crystallite results + 1 + constitutive_plasticity_maxSizePostResults & ! constitutive size & constitutive results + constitutive_source_maxSizePostResults) allocate(materialpoint_results(materialpoint_sizeResults,mesh_maxNips,mesh_NcpElems)) #endif mainProcess: if (worldrank == 0) then write(6,'(/,a)') ' <<<+- homogenization init -+>>>' write(6,'(a15,a)') ' Current time: ',IO_timeStamp() #include "compilation_info.f90" endif mainProcess if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt) then #ifdef TODO write(6,'(a32,1x,7(i8,1x))') 'homogenization_state0: ', shape(homogenization_state0) write(6,'(a32,1x,7(i8,1x))') 'homogenization_subState0: ', shape(homogenization_subState0) write(6,'(a32,1x,7(i8,1x))') 'homogenization_state: ', shape(homogenization_state) #endif write(6,'(a32,1x,7(i8,1x))') 'materialpoint_dPdF: ', shape(materialpoint_dPdF) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_F0: ', shape(materialpoint_F0) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_F: ', shape(materialpoint_F) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_subF0: ', shape(materialpoint_subF0) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_subF: ', shape(materialpoint_subF) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_P: ', shape(materialpoint_P) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_subFrac: ', shape(materialpoint_subFrac) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_subStep: ', shape(materialpoint_subStep) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_subdt: ', shape(materialpoint_subdt) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_requested: ', shape(materialpoint_requested) write(6,'(a32,1x,7(i8,1x))') 'materialpoint_converged: ', shape(materialpoint_converged) write(6,'(a32,1x,7(i8,1x),/)') 'materialpoint_doneAndHappy: ', shape(materialpoint_doneAndHappy) #ifndef FEM write(6,'(a32,1x,7(i8,1x),/)') 'materialpoint_results: ', shape(materialpoint_results) #endif write(6,'(a32,1x,7(i8,1x))') 'maxSizePostResults: ', homogenization_maxSizePostResults endif flush(6) if (debug_g < 1 .or. debug_g > homogenization_Ngrains(mesh_element(3,debug_e))) & call IO_error(602_pInt,ext_msg='component (grain)') end subroutine homogenization_init !-------------------------------------------------------------------------------------------------- !> @brief parallelized calculation of stress and corresponding tangent at material points !-------------------------------------------------------------------------------------------------- subroutine materialpoint_stressAndItsTangent(updateJaco,dt) use numerics, only: & subStepMinHomog, & subStepSizeHomog, & stepIncreaseHomog, & nHomog, & nMPstate use math, only: & math_transpose33 use FEsolving, only: & FEsolving_execElem, & FEsolving_execIP, & terminallyIll use mesh, only: & mesh_element use material, only: & plasticState, & sourceState, & homogState, & thermalState, & damageState, & vacancyfluxState, & porosityState, & hydrogenfluxState, & phase_Nsources, & mappingHomogenization, & phaseAt, phasememberAt, & homogenization_Ngrains use crystallite, only: & crystallite_F0, & crystallite_Fp0, & crystallite_Fp, & crystallite_Fi0, & crystallite_Fi, & crystallite_Lp0, & crystallite_Lp, & crystallite_Li0, & crystallite_Li, & crystallite_dPdF, & crystallite_dPdF0, & crystallite_Tstar0_v, & crystallite_Tstar_v, & crystallite_partionedF0, & crystallite_partionedF, & crystallite_partionedFp0, & crystallite_partionedLp0, & crystallite_partionedFi0, & crystallite_partionedLi0, & crystallite_partioneddPdF0, & crystallite_partionedTstar0_v, & crystallite_dt, & crystallite_requested, & crystallite_converged, & crystallite_stressAndItsTangent, & crystallite_orientations use debug, only: & debug_level, & debug_homogenization, & debug_levelBasic, & debug_levelSelective, & debug_e, & debug_i, & debug_MaterialpointLoopDistribution, & debug_MaterialpointStateLoopDistribution implicit none real(pReal), intent(in) :: dt !< time increment logical, intent(in) :: updateJaco !< initiating Jacobian update integer(pInt) :: & NiterationHomog, & NiterationMPstate, & g, & !< grain number i, & !< integration point number e, & !< element number mySource, & myNgrains !-------------------------------------------------------------------------------------------------- ! initialize to starting condition if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt) then !$OMP CRITICAL (write2out) write(6,'(/a,i5,1x,i2)') '<< HOMOG >> Material Point start at el ip ', debug_e, debug_i write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< HOMOG >> F0', & math_transpose33(materialpoint_F0(1:3,1:3,debug_i,debug_e)) write(6,'(a,/,3(12x,3(f14.9,1x)/))') '<< HOMOG >> F', & math_transpose33(materialpoint_F(1:3,1:3,debug_i,debug_e)) !$OMP END CRITICAL (write2out) endif !-------------------------------------------------------------------------------------------------- ! initialize restoration points of ... do e = FEsolving_execElem(1),FEsolving_execElem(2) myNgrains = homogenization_Ngrains(mesh_element(3,e)) do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e); do g = 1,myNgrains plasticState (phaseAt(g,i,e))%partionedState0(:,phasememberAt(g,i,e)) = & plasticState (phaseAt(g,i,e))%state0( :,phasememberAt(g,i,e)) do mySource = 1_pInt, phase_Nsources(phaseAt(g,i,e)) sourceState(phaseAt(g,i,e))%p(mySource)%partionedState0(:,phasememberAt(g,i,e)) = & sourceState(phaseAt(g,i,e))%p(mySource)%state0( :,phasememberAt(g,i,e)) enddo crystallite_partionedFp0(1:3,1:3,g,i,e) = crystallite_Fp0(1:3,1:3,g,i,e) ! ...plastic def grads crystallite_partionedLp0(1:3,1:3,g,i,e) = crystallite_Lp0(1:3,1:3,g,i,e) ! ...plastic velocity grads crystallite_partionedFi0(1:3,1:3,g,i,e) = crystallite_Fi0(1:3,1:3,g,i,e) ! ...intermediate def grads crystallite_partionedLi0(1:3,1:3,g,i,e) = crystallite_Li0(1:3,1:3,g,i,e) ! ...intermediate velocity grads crystallite_partioneddPdF0(1:3,1:3,1:3,1:3,g,i,e) = crystallite_dPdF0(1:3,1:3,1:3,1:3,g,i,e) ! ...stiffness crystallite_partionedF0(1:3,1:3,g,i,e) = crystallite_F0(1:3,1:3,g,i,e) ! ...def grads crystallite_partionedTstar0_v(1:6,g,i,e) = crystallite_Tstar0_v(1:6,g,i,e) ! ...2nd PK stress enddo; enddo forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e)) materialpoint_subF0(1:3,1:3,i,e) = materialpoint_F0(1:3,1:3,i,e) ! ...def grad materialpoint_subFrac(i,e) = 0.0_pReal materialpoint_subStep(i,e) = 1.0_pReal/subStepSizeHomog ! <> materialpoint_converged(i,e) = .false. ! pretend failed step of twice the required size materialpoint_requested(i,e) = .true. ! everybody requires calculation endforall forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & homogState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & homogState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & homogState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal homogenization state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & thermalState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & thermalState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & thermalState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal thermal state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & damageState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & damageState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & damageState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal damage state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & vacancyfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & vacancyfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & vacancyfluxState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal vacancy transport state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & porosityState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & porosityState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & porosityState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal porosity state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & hydrogenfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & hydrogenfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & hydrogenfluxState(mappingHomogenization(2,i,e))%State0( :,mappingHomogenization(1,i,e)) ! ...internal hydrogen transport state enddo NiterationHomog = 0_pInt cutBackLooping: do while (.not. terminallyIll .and. & any(materialpoint_subStep(:,FEsolving_execELem(1):FEsolving_execElem(2)) > subStepMinHomog)) !$OMP PARALLEL DO PRIVATE(myNgrains) elementLooping1: do e = FEsolving_execElem(1),FEsolving_execElem(2) myNgrains = homogenization_Ngrains(mesh_element(3,e)) IpLooping1: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) converged: if ( materialpoint_converged(i,e) ) then #ifndef _OPENMP if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt & .and. ((e == debug_e .and. i == debug_i) & .or. .not. iand(debug_level(debug_homogenization),debug_levelSelective) /= 0_pInt)) then write(6,'(a,1x,f12.8,1x,a,1x,f12.8,1x,a,i8,1x,i2/)') '<< HOMOG >> winding forward from', & materialpoint_subFrac(i,e), 'to current materialpoint_subFrac', & materialpoint_subFrac(i,e)+materialpoint_subStep(i,e),'in materialpoint_stressAndItsTangent at el ip',e,i endif #endif !--------------------------------------------------------------------------------------------------- ! calculate new subStep and new subFrac materialpoint_subFrac(i,e) = materialpoint_subFrac(i,e) + materialpoint_subStep(i,e) !$OMP FLUSH(materialpoint_subFrac) materialpoint_subStep(i,e) = min(1.0_pReal-materialpoint_subFrac(i,e), & stepIncreaseHomog*materialpoint_subStep(i,e)) ! introduce flexibility for step increase/acceleration !$OMP FLUSH(materialpoint_subStep) steppingNeeded: if (materialpoint_subStep(i,e) > subStepMinHomog) then ! wind forward grain starting point of... crystallite_partionedF0(1:3,1:3,1:myNgrains,i,e) = & crystallite_partionedF(1:3,1:3,1:myNgrains,i,e) ! ...def grads crystallite_partionedFp0(1:3,1:3,1:myNgrains,i,e) = & crystallite_Fp(1:3,1:3,1:myNgrains,i,e) ! ...plastic def grads crystallite_partionedLp0(1:3,1:3,1:myNgrains,i,e) = & crystallite_Lp(1:3,1:3,1:myNgrains,i,e) ! ...plastic velocity grads crystallite_partionedFi0(1:3,1:3,1:myNgrains,i,e) = & crystallite_Fi(1:3,1:3,1:myNgrains,i,e) ! ...intermediate def grads crystallite_partionedLi0(1:3,1:3,1:myNgrains,i,e) = & crystallite_Li(1:3,1:3,1:myNgrains,i,e) ! ...intermediate velocity grads crystallite_partioneddPdF0(1:3,1:3,1:3,1:3,1:myNgrains,i,e) = & crystallite_dPdF(1:3,1:3,1:3,1:3,1:myNgrains,i,e) ! ...stiffness crystallite_partionedTstar0_v(1:6,1:myNgrains,i,e) = & crystallite_Tstar_v(1:6,1:myNgrains,i,e) ! ...2nd PK stress do g = 1,myNgrains plasticState (phaseAt(g,i,e))%partionedState0(:,phasememberAt(g,i,e)) = & plasticState (phaseAt(g,i,e))%state( :,phasememberAt(g,i,e)) do mySource = 1_pInt, phase_Nsources(phaseAt(g,i,e)) sourceState(phaseAt(g,i,e))%p(mySource)%partionedState0(:,phasememberAt(g,i,e)) = & sourceState(phaseAt(g,i,e))%p(mySource)%state( :,phasememberAt(g,i,e)) enddo enddo forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & homogState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & homogState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & homogState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) ! ...internal homogenization state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & thermalState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & thermalState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & thermalState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) ! ...internal thermal state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & damageState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & damageState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & damageState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) ! ...internal damage state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & vacancyfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & vacancyfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & vacancyfluxState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e))! ...internal vacancy transport state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & porosityState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & porosityState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & porosityState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e))! ...internal porosity state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & hydrogenfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & hydrogenfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) = & hydrogenfluxState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e))! ...internal hydrogen transport state materialpoint_subF0(1:3,1:3,i,e) = materialpoint_subF(1:3,1:3,i,e) ! ...def grad !$OMP FLUSH(materialpoint_subF0) elseif (materialpoint_requested(i,e)) then steppingNeeded ! already at final time (??) if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt) then !$OMP CRITICAL (distributionHomog) debug_MaterialpointLoopDistribution(min(nHomog+1,NiterationHomog)) = & debug_MaterialpointLoopDistribution(min(nHomog+1,NiterationHomog)) + 1 !$OMP END CRITICAL (distributionHomog) endif endif steppingNeeded else converged if ( (myNgrains == 1_pInt .and. materialpoint_subStep(i,e) <= 1.0 ) .or. & ! single grain already tried internal subStepping in crystallite subStepSizeHomog * materialpoint_subStep(i,e) <= subStepMinHomog ) then ! would require too small subStep ! cutback makes no sense !$OMP FLUSH(terminallyIll) if (.not. terminallyIll) then ! so first signals terminally ill... !$OMP CRITICAL (write2out) write(6,*) 'Integration point ', i,' at element ', e, ' terminally ill' !$OMP END CRITICAL (write2out) endif !$OMP CRITICAL (setTerminallyIll) terminallyIll = .true. ! ...and kills all others !$OMP END CRITICAL (setTerminallyIll) else ! cutback makes sense materialpoint_subStep(i,e) = subStepSizeHomog * materialpoint_subStep(i,e) ! crystallite had severe trouble, so do a significant cutback !$OMP FLUSH(materialpoint_subStep) #ifndef _OPENMP if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt & .and. ((e == debug_e .and. i == debug_i) & .or. .not. iand(debug_level(debug_homogenization), debug_levelSelective) /= 0_pInt)) then write(6,'(a,1x,f12.8,a,i8,1x,i2/)') & '<< HOMOG >> cutback step in materialpoint_stressAndItsTangent with new materialpoint_subStep:',& materialpoint_subStep(i,e),' at el ip',e,i endif #endif !-------------------------------------------------------------------------------------------------- ! restore... crystallite_Fp(1:3,1:3,1:myNgrains,i,e) = & crystallite_partionedFp0(1:3,1:3,1:myNgrains,i,e) ! ...plastic def grads crystallite_Lp(1:3,1:3,1:myNgrains,i,e) = & crystallite_partionedLp0(1:3,1:3,1:myNgrains,i,e) ! ...plastic velocity grads crystallite_Fi(1:3,1:3,1:myNgrains,i,e) = & crystallite_partionedFi0(1:3,1:3,1:myNgrains,i,e) ! ...intermediate def grads crystallite_Li(1:3,1:3,1:myNgrains,i,e) = & crystallite_partionedLi0(1:3,1:3,1:myNgrains,i,e) ! ...intermediate velocity grads crystallite_dPdF(1:3,1:3,1:3,1:3,1:myNgrains,i,e) = & crystallite_partioneddPdF0(1:3,1:3,1:3,1:3,1:myNgrains,i,e) ! ...stiffness crystallite_Tstar_v(1:6,1:myNgrains,i,e) = & crystallite_partionedTstar0_v(1:6,1:myNgrains,i,e) ! ...2nd PK stress do g = 1, myNgrains plasticState (phaseAt(g,i,e))%state( :,phasememberAt(g,i,e)) = & plasticState (phaseAt(g,i,e))%partionedState0(:,phasememberAt(g,i,e)) do mySource = 1_pInt, phase_Nsources(phaseAt(g,i,e)) sourceState(phaseAt(g,i,e))%p(mySource)%state( :,phasememberAt(g,i,e)) = & sourceState(phaseAt(g,i,e))%p(mySource)%partionedState0(:,phasememberAt(g,i,e)) enddo enddo forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & homogState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & homogState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & homogState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) ! ...internal homogenization state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & thermalState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & thermalState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & thermalState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) ! ...internal thermal state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & damageState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & damageState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & damageState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e)) ! ...internal damage state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & vacancyfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & vacancyfluxState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & vacancyfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e))! ...internal vacancy transport state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & porosityState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & porosityState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & porosityState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e))! ...internal porosity state forall(i = FEsolving_execIP(1,e):FEsolving_execIP(2,e), & hydrogenfluxState(mappingHomogenization(2,i,e))%sizeState > 0_pInt) & hydrogenfluxState(mappingHomogenization(2,i,e))%State( :,mappingHomogenization(1,i,e)) = & hydrogenfluxState(mappingHomogenization(2,i,e))%subState0(:,mappingHomogenization(1,i,e))! ...internal hydrogen transport state endif endif converged if (materialpoint_subStep(i,e) > subStepMinHomog) then materialpoint_requested(i,e) = .true. materialpoint_subF(1:3,1:3,i,e) = materialpoint_subF0(1:3,1:3,i,e) + & materialpoint_subStep(i,e) * (materialpoint_F(1:3,1:3,i,e) - materialpoint_F0(1:3,1:3,i,e)) materialpoint_subdt(i,e) = materialpoint_subStep(i,e) * dt materialpoint_doneAndHappy(1:2,i,e) = [.false.,.true.] endif enddo IpLooping1 enddo elementLooping1 !$OMP END PARALLEL DO NiterationMPstate = 0_pInt convergenceLooping: do while (.not. terminallyIll .and. & any( materialpoint_requested(:,FEsolving_execELem(1):FEsolving_execElem(2)) & .and. .not. materialpoint_doneAndHappy(1,:,FEsolving_execELem(1):FEsolving_execElem(2)) & ) .and. & NiterationMPstate < nMPstate) NiterationMPstate = NiterationMPstate + 1 !-------------------------------------------------------------------------------------------------- ! deformation partitioning ! based on materialpoint_subF0,.._subF,crystallite_partionedF0, and homogenization_state, ! results in crystallite_partionedF !$OMP PARALLEL DO PRIVATE(myNgrains) elementLooping2: do e = FEsolving_execElem(1),FEsolving_execElem(2) myNgrains = homogenization_Ngrains(mesh_element(3,e)) IpLooping2: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) if ( materialpoint_requested(i,e) .and. & ! process requested but... .not. materialpoint_doneAndHappy(1,i,e)) then ! ...not yet done material points call homogenization_partitionDeformation(i,e) ! partition deformation onto constituents crystallite_dt(1:myNgrains,i,e) = materialpoint_subdt(i,e) ! propagate materialpoint dt to grains crystallite_requested(1:myNgrains,i,e) = .true. ! request calculation for constituents else crystallite_requested(1:myNgrains,i,e) = .false. ! calculation for constituents not required anymore endif enddo IpLooping2 enddo elementLooping2 !$OMP END PARALLEL DO !-------------------------------------------------------------------------------------------------- ! crystallite integration ! based on crystallite_partionedF0,.._partionedF ! incrementing by crystallite_dt call crystallite_stressAndItsTangent(updateJaco) ! request stress and tangent calculation for constituent grains !-------------------------------------------------------------------------------------------------- ! state update !$OMP PARALLEL DO elementLooping3: do e = FEsolving_execElem(1),FEsolving_execElem(2) IpLooping3: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) if ( materialpoint_requested(i,e) .and. & .not. materialpoint_doneAndHappy(1,i,e)) then if (.not. all(crystallite_converged(:,i,e))) then materialpoint_doneAndHappy(1:2,i,e) = [.true.,.false.] materialpoint_converged(i,e) = .false. else materialpoint_doneAndHappy(1:2,i,e) = homogenization_updateState(i,e) materialpoint_converged(i,e) = all(materialpoint_doneAndHappy(1:2,i,e)) ! converged if done and happy endif !$OMP FLUSH(materialpoint_converged) if (materialpoint_converged(i,e)) then if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt) then !$OMP CRITICAL (distributionMPState) debug_MaterialpointStateLoopdistribution(NiterationMPstate) = & debug_MaterialpointStateLoopdistribution(NiterationMPstate) + 1_pInt !$OMP END CRITICAL (distributionMPState) endif endif endif enddo IpLooping3 enddo elementLooping3 !$OMP END PARALLEL DO enddo convergenceLooping NiterationHomog = NiterationHomog + 1_pInt enddo cutBackLooping if (.not. terminallyIll ) then call crystallite_orientations() ! calculate crystal orientations !$OMP PARALLEL DO elementLooping4: do e = FEsolving_execElem(1),FEsolving_execElem(2) IpLooping4: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) call homogenization_averageStressAndItsTangent(i,e) enddo IpLooping4 enddo elementLooping4 !$OMP END PARALLEL DO else !$OMP CRITICAL (write2out) write(6,'(/,a,/)') '<< HOMOG >> Material Point terminally ill' !$OMP END CRITICAL (write2out) endif end subroutine materialpoint_stressAndItsTangent !-------------------------------------------------------------------------------------------------- !> @brief parallelized calculation of result array at material points !-------------------------------------------------------------------------------------------------- subroutine materialpoint_postResults use FEsolving, only: & FEsolving_execElem, & FEsolving_execIP use mesh, only: & mesh_element use material, only: & mappingHomogenization, & #ifdef FEM phaseAt, phasememberAt, & homogenization_maxNgrains, & material_Ncrystallite, & material_Nphase, & #else homogState, & thermalState, & damageState, & vacancyfluxState, & porosityState, & hydrogenfluxState, & #endif plasticState, & sourceState, & material_phase, & homogenization_Ngrains, & microstructure_crystallite use constitutive, only: & #ifdef FEM constitutive_plasticity_maxSizePostResults, & constitutive_source_maxSizePostResults, & #endif constitutive_postResults use crystallite, only: & #ifdef FEM crystallite_maxSizePostResults, & #endif crystallite_sizePostResults, & crystallite_postResults implicit none integer(pInt) :: & thePos, & theSize, & myNgrains, & myCrystallite, & g, & !< grain number i, & !< integration point number e !< element number #ifdef FEM integer(pInt) :: & myHomog, & myPhase, & crystalliteCtr(material_Ncrystallite, homogenization_maxNgrains), & phaseCtr (material_Nphase, homogenization_maxNgrains) real(pReal), dimension(1+crystallite_maxSizePostResults + & 1+constitutive_plasticity_maxSizePostResults + & constitutive_source_maxSizePostResults) :: & crystalliteResults crystalliteCtr = 0_pInt; phaseCtr = 0_pInt elementLooping: do e = FEsolving_execElem(1),FEsolving_execElem(2) myNgrains = homogenization_Ngrains(mesh_element(3,e)) myCrystallite = microstructure_crystallite(mesh_element(4,e)) IpLooping: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) myHomog = mappingHomogenization(2,i,e) thePos = mappingHomogenization(1,i,e) homogOutput(myHomog)%output(1: & homogOutput(myHomog)%sizeResults, & thePos) = homogenization_postResults(i,e) grainLooping :do g = 1,myNgrains myPhase = phaseAt(g,i,e) crystalliteResults(1:1+crystallite_sizePostResults(myCrystallite) + & 1+plasticState(myPhase)%sizePostResults + & sum(sourceState(myPhase)%p(:)%sizePostResults)) = crystallite_postResults(g,i,e) if (microstructure_crystallite(mesh_element(4,e)) == myCrystallite .and. & homogenization_Ngrains (mesh_element(3,e)) >= g) then crystalliteCtr(myCrystallite,g) = crystalliteCtr(myCrystallite,g) + 1_pInt crystalliteOutput(myCrystallite,g)% & output(1:crystalliteOutput(myCrystallite,g)%sizeResults,crystalliteCtr(myCrystallite,g)) = & crystalliteResults(2:1+crystalliteOutput(myCrystallite,g)%sizeResults) endif if (material_phase(g,i,e) == myPhase) then phaseCtr(myPhase,g) = phaseCtr(myPhase,g) + 1_pInt phaseOutput(myPhase,g)% & output(1:phaseOutput(myPhase,g)%sizeResults,phaseCtr(myPhase,g)) = & crystalliteResults(3 + crystalliteOutput(myCrystallite,g)%sizeResults: & 1 + crystalliteOutput(myCrystallite,g)%sizeResults + & 1 + plasticState (myphase)%sizePostResults + & sum(sourceState(myphase)%p(:)%sizePostResults)) endif enddo grainLooping enddo IpLooping enddo elementLooping #else !$OMP PARALLEL DO PRIVATE(myNgrains,myCrystallite,thePos,theSize) elementLooping: do e = FEsolving_execElem(1),FEsolving_execElem(2) myNgrains = homogenization_Ngrains(mesh_element(3,e)) myCrystallite = microstructure_crystallite(mesh_element(4,e)) IpLooping: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e) thePos = 0_pInt theSize = homogState (mappingHomogenization(2,i,e))%sizePostResults & + thermalState (mappingHomogenization(2,i,e))%sizePostResults & + damageState (mappingHomogenization(2,i,e))%sizePostResults & + vacancyfluxState (mappingHomogenization(2,i,e))%sizePostResults & + porosityState (mappingHomogenization(2,i,e))%sizePostResults & + hydrogenfluxState(mappingHomogenization(2,i,e))%sizePostResults materialpoint_results(thePos+1,i,e) = real(theSize,pReal) ! tell size of homogenization results thePos = thePos + 1_pInt if (theSize > 0_pInt) then ! any homogenization results to mention? materialpoint_results(thePos+1:thePos+theSize,i,e) = homogenization_postResults(i,e) ! tell homogenization results thePos = thePos + theSize endif materialpoint_results(thePos+1,i,e) = real(myNgrains,pReal) ! tell number of grains at materialpoint thePos = thePos + 1_pInt grainLooping :do g = 1,myNgrains theSize = 1 + crystallite_sizePostResults(myCrystallite) + & 1 + plasticState (material_phase(g,i,e))%sizePostResults + & !ToDo sum(sourceState(material_phase(g,i,e))%p(:)%sizePostResults) materialpoint_results(thePos+1:thePos+theSize,i,e) = crystallite_postResults(g,i,e) ! tell crystallite results thePos = thePos + theSize enddo grainLooping enddo IpLooping enddo elementLooping !$OMP END PARALLEL DO #endif end subroutine materialpoint_postResults !-------------------------------------------------------------------------------------------------- !> @brief partition material point def grad onto constituents !-------------------------------------------------------------------------------------------------- subroutine homogenization_partitionDeformation(ip,el) use mesh, only: & mesh_element use material, only: & homogenization_type, & homogenization_maxNgrains, & HOMOGENIZATION_NONE_ID, & HOMOGENIZATION_ISOSTRAIN_ID, & HOMOGENIZATION_RGC_ID use crystallite, only: & crystallite_partionedF use homogenization_isostrain, only: & homogenization_isostrain_partitionDeformation use homogenization_RGC, only: & homogenization_RGC_partitionDeformation implicit none integer(pInt), intent(in) :: & ip, & !< integration point el !< element number chosenHomogenization: select case(homogenization_type(mesh_element(3,el))) case (HOMOGENIZATION_NONE_ID) chosenHomogenization crystallite_partionedF(1:3,1:3,1:homogenization_maxNgrains,ip,el) = 0.0_pReal crystallite_partionedF(1:3,1:3,1:1,ip,el) = & spread(materialpoint_subF(1:3,1:3,ip,el),3,1) case (HOMOGENIZATION_ISOSTRAIN_ID) chosenHomogenization call homogenization_isostrain_partitionDeformation(& crystallite_partionedF(1:3,1:3,1:homogenization_maxNgrains,ip,el), & materialpoint_subF(1:3,1:3,ip,el),& el) case (HOMOGENIZATION_RGC_ID) chosenHomogenization call homogenization_RGC_partitionDeformation(& crystallite_partionedF(1:3,1:3,1:homogenization_maxNgrains,ip,el), & materialpoint_subF(1:3,1:3,ip,el),& ip, & el) end select chosenHomogenization end subroutine homogenization_partitionDeformation !-------------------------------------------------------------------------------------------------- !> @brief update the internal state of the homogenization scheme and tell whether "done" and !> "happy" with result !-------------------------------------------------------------------------------------------------- function homogenization_updateState(ip,el) use mesh, only: & mesh_element use material, only: & homogenization_type, & thermal_type, & damage_type, & vacancyflux_type, & homogenization_maxNgrains, & HOMOGENIZATION_RGC_ID, & THERMAL_adiabatic_ID, & DAMAGE_local_ID, & VACANCYFLUX_isochempot_ID use crystallite, only: & crystallite_P, & crystallite_dPdF, & crystallite_partionedF,& crystallite_partionedF0 use homogenization_RGC, only: & homogenization_RGC_updateState use thermal_adiabatic, only: & thermal_adiabatic_updateState use damage_local, only: & damage_local_updateState use vacancyflux_isochempot, only: & vacancyflux_isochempot_updateState implicit none integer(pInt), intent(in) :: & ip, & !< integration point el !< element number logical, dimension(2) :: homogenization_updateState homogenization_updateState = .true. chosenHomogenization: select case(homogenization_type(mesh_element(3,el))) case (HOMOGENIZATION_RGC_ID) chosenHomogenization homogenization_updateState = & homogenization_updateState .and. & homogenization_RGC_updateState(crystallite_P(1:3,1:3,1:homogenization_maxNgrains,ip,el), & crystallite_partionedF(1:3,1:3,1:homogenization_maxNgrains,ip,el), & crystallite_partionedF0(1:3,1:3,1:homogenization_maxNgrains,ip,el),& materialpoint_subF(1:3,1:3,ip,el),& materialpoint_subdt(ip,el), & crystallite_dPdF(1:3,1:3,1:3,1:3,1:homogenization_maxNgrains,ip,el), & ip, & el) end select chosenHomogenization chosenThermal: select case (thermal_type(mesh_element(3,el))) case (THERMAL_adiabatic_ID) chosenThermal homogenization_updateState = & homogenization_updateState .and. & thermal_adiabatic_updateState(materialpoint_subdt(ip,el), & ip, & el) end select chosenThermal chosenDamage: select case (damage_type(mesh_element(3,el))) case (DAMAGE_local_ID) chosenDamage homogenization_updateState = & homogenization_updateState .and. & damage_local_updateState(materialpoint_subdt(ip,el), & ip, & el) end select chosenDamage chosenVacancyflux: select case (vacancyflux_type(mesh_element(3,el))) case (VACANCYFLUX_isochempot_ID) chosenVacancyflux homogenization_updateState = & homogenization_updateState .and. & vacancyflux_isochempot_updateState(materialpoint_subdt(ip,el), & ip, & el) end select chosenVacancyflux end function homogenization_updateState !-------------------------------------------------------------------------------------------------- !> @brief derive average stress and stiffness from constituent quantities !-------------------------------------------------------------------------------------------------- subroutine homogenization_averageStressAndItsTangent(ip,el) use mesh, only: & mesh_element use material, only: & homogenization_type, & homogenization_maxNgrains, & HOMOGENIZATION_NONE_ID, & HOMOGENIZATION_ISOSTRAIN_ID, & HOMOGENIZATION_RGC_ID use crystallite, only: & crystallite_P,crystallite_dPdF use homogenization_isostrain, only: & homogenization_isostrain_averageStressAndItsTangent use homogenization_RGC, only: & homogenization_RGC_averageStressAndItsTangent implicit none integer(pInt), intent(in) :: & ip, & !< integration point el !< element number chosenHomogenization: select case(homogenization_type(mesh_element(3,el))) case (HOMOGENIZATION_NONE_ID) chosenHomogenization materialpoint_P(1:3,1:3,ip,el) = sum(crystallite_P(1:3,1:3,1:1,ip,el),3) materialpoint_dPdF(1:3,1:3,1:3,1:3,ip,el) & = sum(crystallite_dPdF(1:3,1:3,1:3,1:3,1:1,ip,el),5) case (HOMOGENIZATION_ISOSTRAIN_ID) chosenHomogenization call homogenization_isostrain_averageStressAndItsTangent(& materialpoint_P(1:3,1:3,ip,el), & materialpoint_dPdF(1:3,1:3,1:3,1:3,ip,el),& crystallite_P(1:3,1:3,1:homogenization_maxNgrains,ip,el), & crystallite_dPdF(1:3,1:3,1:3,1:3,1:homogenization_maxNgrains,ip,el), & el) case (HOMOGENIZATION_RGC_ID) chosenHomogenization call homogenization_RGC_averageStressAndItsTangent(& materialpoint_P(1:3,1:3,ip,el), & materialpoint_dPdF(1:3,1:3,1:3,1:3,ip,el),& crystallite_P(1:3,1:3,1:homogenization_maxNgrains,ip,el), & crystallite_dPdF(1:3,1:3,1:3,1:3,1:homogenization_maxNgrains,ip,el), & el) end select chosenHomogenization end subroutine homogenization_averageStressAndItsTangent !-------------------------------------------------------------------------------------------------- !> @brief return array of homogenization results for post file inclusion. call only, !> if homogenization_sizePostResults(i,e) > 0 !! !-------------------------------------------------------------------------------------------------- function homogenization_postResults(ip,el) use mesh, only: & mesh_element use material, only: & mappingHomogenization, & homogState, & thermalState, & damageState, & vacancyfluxState, & porosityState, & hydrogenfluxState, & homogenization_type, & thermal_type, & damage_type, & vacancyflux_type, & porosity_type, & hydrogenflux_type, & HOMOGENIZATION_NONE_ID, & HOMOGENIZATION_ISOSTRAIN_ID, & HOMOGENIZATION_RGC_ID, & THERMAL_isothermal_ID, & THERMAL_adiabatic_ID, & THERMAL_conduction_ID, & DAMAGE_none_ID, & DAMAGE_local_ID, & DAMAGE_nonlocal_ID, & VACANCYFLUX_isoconc_ID, & VACANCYFLUX_isochempot_ID, & VACANCYFLUX_cahnhilliard_ID, & POROSITY_none_ID, & POROSITY_phasefield_ID, & HYDROGENFLUX_isoconc_ID, & HYDROGENFLUX_cahnhilliard_ID use homogenization_isostrain, only: & homogenization_isostrain_postResults use homogenization_RGC, only: & homogenization_RGC_postResults use thermal_adiabatic, only: & thermal_adiabatic_postResults use thermal_conduction, only: & thermal_conduction_postResults use damage_local, only: & damage_local_postResults use damage_nonlocal, only: & damage_nonlocal_postResults use vacancyflux_isochempot, only: & vacancyflux_isochempot_postResults use vacancyflux_cahnhilliard, only: & vacancyflux_cahnhilliard_postResults use porosity_phasefield, only: & porosity_phasefield_postResults use hydrogenflux_cahnhilliard, only: & hydrogenflux_cahnhilliard_postResults implicit none integer(pInt), intent(in) :: & ip, & !< integration point el !< element number real(pReal), dimension( homogState (mappingHomogenization(2,ip,el))%sizePostResults & + thermalState (mappingHomogenization(2,ip,el))%sizePostResults & + damageState (mappingHomogenization(2,ip,el))%sizePostResults & + vacancyfluxState (mappingHomogenization(2,ip,el))%sizePostResults & + porosityState (mappingHomogenization(2,ip,el))%sizePostResults & + hydrogenfluxState(mappingHomogenization(2,ip,el))%sizePostResults) :: & homogenization_postResults integer(pInt) :: & startPos, endPos homogenization_postResults = 0.0_pReal startPos = 1_pInt endPos = homogState(mappingHomogenization(2,ip,el))%sizePostResults chosenHomogenization: select case (homogenization_type(mesh_element(3,el))) case (HOMOGENIZATION_NONE_ID) chosenHomogenization case (HOMOGENIZATION_ISOSTRAIN_ID) chosenHomogenization homogenization_postResults(startPos:endPos) = & homogenization_isostrain_postResults(& ip, & el, & materialpoint_P(1:3,1:3,ip,el), & materialpoint_F(1:3,1:3,ip,el)) case (HOMOGENIZATION_RGC_ID) chosenHomogenization homogenization_postResults(startPos:endPos) = & homogenization_RGC_postResults(& ip, & el, & materialpoint_P(1:3,1:3,ip,el), & materialpoint_F(1:3,1:3,ip,el)) end select chosenHomogenization startPos = endPos + 1_pInt endPos = endPos + thermalState(mappingHomogenization(2,ip,el))%sizePostResults chosenThermal: select case (thermal_type(mesh_element(3,el))) case (THERMAL_isothermal_ID) chosenThermal case (THERMAL_adiabatic_ID) chosenThermal homogenization_postResults(startPos:endPos) = & thermal_adiabatic_postResults(ip, el) case (THERMAL_conduction_ID) chosenThermal homogenization_postResults(startPos:endPos) = & thermal_conduction_postResults(ip, el) end select chosenThermal startPos = endPos + 1_pInt endPos = endPos + damageState(mappingHomogenization(2,ip,el))%sizePostResults chosenDamage: select case (damage_type(mesh_element(3,el))) case (DAMAGE_none_ID) chosenDamage case (DAMAGE_local_ID) chosenDamage homogenization_postResults(startPos:endPos) = & damage_local_postResults(ip, el) case (DAMAGE_nonlocal_ID) chosenDamage homogenization_postResults(startPos:endPos) = & damage_nonlocal_postResults(ip, el) end select chosenDamage startPos = endPos + 1_pInt endPos = endPos + vacancyfluxState(mappingHomogenization(2,ip,el))%sizePostResults chosenVacancyflux: select case (vacancyflux_type(mesh_element(3,el))) case (VACANCYFLUX_isoconc_ID) chosenVacancyflux case (VACANCYFLUX_isochempot_ID) chosenVacancyflux homogenization_postResults(startPos:endPos) = & vacancyflux_isochempot_postResults(ip, el) case (VACANCYFLUX_cahnhilliard_ID) chosenVacancyflux homogenization_postResults(startPos:endPos) = & vacancyflux_cahnhilliard_postResults(ip, el) end select chosenVacancyflux startPos = endPos + 1_pInt endPos = endPos + porosityState(mappingHomogenization(2,ip,el))%sizePostResults chosenPorosity: select case (porosity_type(mesh_element(3,el))) case (POROSITY_none_ID) chosenPorosity case (POROSITY_phasefield_ID) chosenPorosity homogenization_postResults(startPos:endPos) = & porosity_phasefield_postResults(ip, el) end select chosenPorosity startPos = endPos + 1_pInt endPos = endPos + hydrogenfluxState(mappingHomogenization(2,ip,el))%sizePostResults chosenHydrogenflux: select case (hydrogenflux_type(mesh_element(3,el))) case (HYDROGENFLUX_isoconc_ID) chosenHydrogenflux case (HYDROGENFLUX_cahnhilliard_ID) chosenHydrogenflux homogenization_postResults(startPos:endPos) = & hydrogenflux_cahnhilliard_postResults(ip, el) end select chosenHydrogenflux end function homogenization_postResults end module homogenization