!------------------------------------------------------------------------------------------------- !> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH !> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH !> @brief Introducing Voce-type kinematic hardening rule into crystal phenopowerlaw plasticity !! formulation using a power law fitting !-------------------------------------------------------------------------------------------------- module plastic_kinehardening use prec, only: & pReal,& pInt implicit none private integer(pInt), dimension(:), allocatable, public, protected :: & plastic_kinehardening_sizePostResults !< cumulative size of post results integer(pInt), dimension(:,:), allocatable, target, public :: & plastic_kinehardening_sizePostResult !< size of each post result output character(len=64), dimension(:,:), allocatable, target, public :: & plastic_kinehardening_output !< name of each post result output integer(pInt), dimension(:), allocatable, target, public :: & plastic_kinehardening_Noutput !< number of outputs per instance integer(pInt), dimension(:), allocatable, public, protected :: & plastic_kinehardening_totalNslip !< no. of slip system used in simulation integer(pInt), dimension(:,:), allocatable, private :: & plastic_kinehardening_Nslip !< active number of slip systems per family (input parameter, per family) enum, bind(c) enumerator :: undefined_ID, & crss_ID, & !< critical resolved stress crss_back_ID, & !< critical resolved back stress sense_ID, & !< sense of acting shear stress (-1 or +1) chi0_ID, & !< backstress at last switch of stress sense (positive?) gamma0_ID, & !< accumulated shear at last switch of stress sense (at current switch?) accshear_ID, & sumGamma_ID, & shearrate_ID, & resolvedstress_ID end enum type, private :: tParameters !< container type for internal constitutive parameters integer(kind(undefined_ID)), dimension(:), allocatable, private :: & outputID !< ID of each post result output real(pReal) :: & gdot0, & !< reference shear strain rate for slip (input parameter) n_slip, & !< stress exponent for slip (input parameter) aTolResistance, & aTolShear real(pReal), dimension(:), allocatable, private :: & crss0, & !< initial critical shear stress for slip (input parameter, per family) theta0, & !< initial hardening rate of forward stress for each slip theta1, & !< asymptotic hardening rate of forward stress for each slip > theta0_b, & !< initial hardening rate of back stress for each slip > theta1_b, & !< asymptotic hardening rate of back stress for each slip > tau1, & tau1_b, & interaction_slipslip, & !< latent hardening matrix nonSchmidCoeff real(pReal), dimension(:,:), allocatable, private :: & hardeningMatrix_SlipSlip end type type, private :: tKinehardeningState real(pReal), pointer, dimension(:,:) :: & !< vectors along NipcMyInstance crss, & !< critical resolved stress crss_back, & !< critical resolved back stress sense, & !< sense of acting shear stress (-1 or +1) chi0, & !< backstress at last switch of stress sense gamma0, & !< accumulated shear at last switch of stress sense accshear !< accumulated (absolute) shear real(pReal), pointer, dimension(:) :: & !< scalars along NipcMyInstance sumGamma !< accumulated shear across all systems end type type(tParameters), dimension(:), allocatable, private :: & param !< containers of constitutive parameters (len Ninstance) type(tKinehardeningState), allocatable, dimension(:), private :: & dotState, & deltaState, & state, & state0 public :: & plastic_kinehardening_init, & plastic_kinehardening_LpAndItsTangent, & plastic_kinehardening_dotState, & plastic_kinehardening_deltaState, & plastic_kinehardening_postResults private :: & plastic_kinehardening_shearRates contains !-------------------------------------------------------------------------------------------------- !> @brief module initialization !> @details reads in material parameters, allocates arrays, and does sanity checks !-------------------------------------------------------------------------------------------------- subroutine plastic_kinehardening_init(fileUnit) use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment) use prec, only: & dEq0 use debug, only: & debug_level, & debug_constitutive,& debug_levelBasic use math, only: & math_Mandel3333to66, & math_Voigt66to3333, & math_expand use IO, only: & IO_read, & IO_lc, & IO_getTag, & IO_isBlank, & IO_stringPos, & IO_stringValue, & IO_floatValue, & IO_intValue, & IO_warning, & IO_error, & IO_timeStamp, & IO_EOF use material, only: & PLASTICITY_kinehardening_label, & PLASTICITY_kinehardening_ID, & phase_plasticity, & phase_plasticityInstance, & phase_Noutput, & material_phase, & plasticState, & MATERIAL_partPhase use lattice use numerics,only: & numerics_integrator implicit none integer(pInt), intent(in) :: fileUnit integer(pInt), allocatable, dimension(:) :: chunkPos integer(pInt) :: & o, j, k, f, & output_ID, & phase, & instance, & maxNinstance, & NipcMyPhase, & Nchunks_SlipSlip = 0_pInt, Nchunks_SlipFamilies = 0_pInt, & Nchunks_nonSchmid = 0_pInt, & offset_slip, index_myFamily, index_otherFamily, & startIndex, endIndex, & mySize, nSlip, nSlipFamilies, & sizeDotState, & sizeState, & sizeDeltaState real(pReal), dimension(:), allocatable :: tempPerSlip character(len=65536) :: & tag = '', & line = '', & extmsg = '' character(len=64) :: & outputtag = '' write(6,'(/,a)') ' <<<+- constitutive_'//PLASTICITY_KINEHARDENING_label//' init -+>>>' write(6,'(a15,a)') ' Current time: ',IO_timeStamp() #include "compilation_info.f90" maxNinstance = int(count(phase_plasticity == PLASTICITY_KINEHARDENING_ID),pInt) if (maxNinstance == 0_pInt) return if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0_pInt) & write(6,'(a,1x,i5,/)') '# instances:',maxNinstance allocate(plastic_kinehardening_sizePostResults(maxNinstance), source=0_pInt) allocate(plastic_kinehardening_sizePostResult(maxval(phase_Noutput),maxNinstance), & source=0_pInt) allocate(plastic_kinehardening_output(maxval(phase_Noutput),maxNinstance)) plastic_kinehardening_output = '' allocate(plastic_kinehardening_Noutput(maxNinstance), source=0_pInt) allocate(plastic_kinehardening_Nslip(lattice_maxNslipFamily,maxNinstance), source=0_pInt) allocate(plastic_kinehardening_totalNslip(maxNinstance), source=0_pInt) allocate(param(maxNinstance)) ! one container of parameters per instance rewind(fileUnit) phase = 0_pInt do while (trim(line) /= IO_EOF .and. IO_lc(IO_getTag(line,'<','>')) /= material_partPhase) ! wind forward to line = IO_read(fileUnit) enddo parsingFile: do while (trim(line) /= IO_EOF) ! read through sections of phase part line = IO_read(fileUnit) if (IO_isBlank(line)) cycle ! skip empty lines if (IO_getTag(line,'<','>') /= '') then ! stop at next part line = IO_read(fileUnit, .true.) ! reset IO_read exit endif if (IO_getTag(line,'[',']') /= '') then ! next phase phase = phase + 1_pInt ! advance phase section counter if (phase_plasticity(phase) == PLASTICITY_KINEHARDENING_ID) then instance = phase_plasticityInstance(phase) ! count instances of my constitutive law Nchunks_SlipFamilies = count(lattice_NslipSystem(:,phase) > 0_pInt) ! maximum number of slip families according to lattice type of current phase Nchunks_SlipSlip = maxval(lattice_interactionSlipSlip(:,:,phase)) Nchunks_nonSchmid = lattice_NnonSchmid(phase) allocate(param(instance)%outputID(phase_Noutput(phase)), source=0_pInt) ! allocate space for IDs of every requested output allocate(param(instance)%crss0 (Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%tau1 (Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%tau1_b (Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%theta0 (Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%theta1 (Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%theta0_b(Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%theta1_b(Nchunks_SlipFamilies), source=0.0_pReal) allocate(param(instance)%interaction_slipslip(Nchunks_SlipSlip), source=0.0_pReal) allocate(param(instance)%nonSchmidCoeff(Nchunks_nonSchmid), source=0.0_pReal) if(allocated(tempPerSlip)) deallocate(tempPerSlip) allocate(tempPerSlip(Nchunks_SlipFamilies)) endif cycle ! skip to next line endif if (phase > 0_pInt ) then; if (phase_plasticity(phase) == PLASTICITY_KINEHARDENING_ID) then ! one of my phases. Do not short-circuit here (.and. between if-statements), it's not safe in Fortran instance = phase_plasticityInstance(phase) ! which instance of my plasticity is present phase chunkPos = IO_stringPos(line) tag = IO_lc(IO_stringValue(line,chunkPos,1_pInt)) ! extract key select case(tag) case ('(output)') outputtag = IO_lc(IO_stringValue(line,chunkPos,2_pInt)) output_ID = undefined_ID select case(outputtag) case ('resistance') output_ID = crss_ID case ('backstress') output_ID = crss_back_ID case ('sense') output_ID = sense_ID case ('chi0') output_ID = chi0_ID case ('gamma0') output_ID = gamma0_ID case ('accumulatedshear') output_ID = accshear_ID case ('totalshear') output_ID = sumGamma_ID case ('shearrate') output_ID = shearrate_ID case ('resolvedstress') output_ID = resolvedstress_ID end select if (output_ID /= undefined_ID) then plastic_kinehardening_Noutput(instance) = plastic_kinehardening_Noutput(instance) + 1_pInt plastic_kinehardening_output(plastic_kinehardening_Noutput(instance),instance) = outputtag param(instance)%outputID (plastic_kinehardening_Noutput(instance)) = output_ID endif !-------------------------------------------------------------------------------------------------- ! parameters depending on number of slip families case ('nslip') if (chunkPos(1) < Nchunks_SlipFamilies + 1_pInt) & call IO_warning(50_pInt,ext_msg=trim(tag)//' ('//PLASTICITY_KINEHARDENING_label//')') if (chunkPos(1) > Nchunks_SlipFamilies + 1_pInt) & call IO_error(150_pInt,ext_msg=trim(tag)//' ('//PLASTICITY_KINEHARDENING_label//')') Nchunks_SlipFamilies = chunkPos(1) - 1_pInt ! user specified number of (possibly) active slip families (e.g. 6 0 6 --> 3) do j = 1_pInt, Nchunks_SlipFamilies plastic_kinehardening_Nslip(j,instance) = IO_intValue(line,chunkPos,1_pInt+j) enddo case ('crss0','tau1','tau1_b','theta0','theta1','theta0_b','theta1_b') tempPerSlip = 0.0_pReal do j = 1_pInt, Nchunks_SlipFamilies if (plastic_kinehardening_Nslip(j,instance) > 0_pInt) & tempPerSlip(j) = IO_floatValue(line,chunkPos,1_pInt+j) enddo select case(tag) case ('crss0') param(instance)%crss0(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('tau1') param(instance)%tau1(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('tau1_b') param(instance)%tau1_b(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('theta0') param(instance)%theta0(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('theta1') param(instance)%theta1(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('theta0_b') param(instance)%theta0_b(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) case ('theta1_b') param(instance)%theta1_b(1:Nchunks_SlipFamilies) = tempPerSlip(1:Nchunks_SlipFamilies) end select !-------------------------------------------------------------------------------------------------- ! parameters depending on number of interactions case ('interaction_slipslip') if (chunkPos(1) < 1_pInt + Nchunks_SlipSlip) & call IO_warning(52_pInt,ext_msg=trim(tag)//' ('//PLASTICITY_KINEHARDENING_label//')') do j = 1_pInt, Nchunks_SlipSlip param(instance)%interaction_slipslip(j) = IO_floatValue(line,chunkPos,1_pInt+j) enddo case ('nonSchmidCoeff') if (chunkPos(1) < 1_pInt + Nchunks_nonSchmid) & call IO_warning(52_pInt,ext_msg=trim(tag)//' ('//PLASTICITY_KINEHARDENING_label//')') do j = 1_pInt,Nchunks_nonSchmid param(instance)%nonSchmidCoeff(j) = IO_floatValue(line,chunkPos,1_pInt+j) enddo !-------------------------------------------------------------------------------------------------- ! parameters independent of number of slip families case ('gdot0') param(instance)%gdot0 = IO_floatValue(line,chunkPos,2_pInt) case ('n_slip') param(instance)%n_slip = IO_floatValue(line,chunkPos,2_pInt) case ('aTolResistance') param(instance)%aTolResistance = IO_floatValue(line,chunkPos,2_pInt) case ('aTolShear') param(instance)%aTolShear = IO_floatValue(line,chunkPos,2_pInt) case default end select endif; endif enddo parsingFile !-------------------------------------------------------------------------------------------------- ! allocation of variables whose size depends on the total number of active slip systems allocate(state(maxNinstance)) allocate(state0(maxNinstance)) allocate(dotState(maxNinstance)) allocate(deltaState(maxNinstance)) initializeInstances: do phase = 1_pInt, size(phase_plasticity) ! loop through all phases in material.config myPhase2: if (phase_plasticity(phase) == PLASTICITY_KINEHARDENING_ID) then ! only consider my phase NipcMyPhase = count(material_phase == phase) ! number of IPCs containing my phase instance = phase_plasticityInstance(phase) ! which instance of my phase plastic_kinehardening_Nslip(1:lattice_maxNslipFamily,instance) = & min(lattice_NslipSystem(1:lattice_maxNslipFamily,phase),& ! limit active slip systems per family to min of available and requested plastic_kinehardening_Nslip(1:lattice_maxNslipFamily,instance)) plastic_kinehardening_totalNslip(instance) = sum(plastic_kinehardening_Nslip(:,instance)) ! how many slip systems altogether nSlipFamilies = count(plastic_kinehardening_Nslip(:,instance) > 0_pInt) nSlip = plastic_kinehardening_totalNslip(instance) ! total number of active slip systems !-------------------------------------------------------------------------------------------------- ! sanity checks if (any(plastic_kinehardening_Nslip(1:nSlipFamilies,instance) > 0_pInt & .and. param(instance)%crss0(1:nSlipFamilies) < 0.0_pReal)) extmsg = trim(extmsg)//' crss0' if (any(plastic_kinehardening_Nslip(1:nSlipFamilies,instance) > 0_pInt & .and. param(instance)%tau1(1:nSlipFamilies) <= 0.0_pReal)) extmsg = trim(extmsg)//' tau1' if (any(plastic_kinehardening_Nslip(1:nSlipFamilies,instance) > 0_pInt & .and. param(instance)%tau1_b(1:nSlipFamilies) < 0.0_pReal)) extmsg = trim(extmsg)//' tau1_b' if (param(instance)%gdot0 <= 0.0_pReal) extmsg = trim(extmsg)//' gdot0' if (param(instance)%n_slip <= 0.0_pReal) extmsg = trim(extmsg)//' n_slip' if (param(instance)%aTolResistance <= 0.0_pReal) param(instance)%aTolResistance = 1.0_pReal ! default absolute tolerance 1 Pa if (param(instance)%aTolShear <= 0.0_pReal) param(instance)%aTolShear = 1.0e-6_pReal ! default absolute tolerance 1e-6 if (extmsg /= '') then extmsg = trim(extmsg)//' ('//PLASTICITY_KINEHARDENING_label//')' ! prepare error message identifier call IO_error(211_pInt,ip=instance,ext_msg=extmsg) endif allocate(param(instance)%hardeningMatrix_SlipSlip(nSlip,nSlip), source=0.0_pReal) do f = 1_pInt,lattice_maxNslipFamily ! >>> interaction slip -- X index_myFamily = sum(plastic_kinehardening_Nslip(1:f-1_pInt,instance)) do j = 1_pInt,plastic_kinehardening_Nslip(f,instance) ! loop over (active) systems in my family (slip) do o = 1_pInt,lattice_maxNslipFamily index_otherFamily = sum(plastic_kinehardening_Nslip(1:o-1_pInt,instance)) do k = 1_pInt,plastic_kinehardening_Nslip(o,instance) ! loop over (active) systems in other family (slip) param(instance)%hardeningMatrix_SlipSlip(index_myFamily+j,index_otherFamily+k) = & param(instance)%interaction_SlipSlip(lattice_interactionSlipSlip( & sum(lattice_NslipSystem(1:f-1,phase))+j, & sum(lattice_NslipSystem(1:o-1,phase))+k, & phase)) enddo; enddo enddo; enddo !-------------------------------------------------------------------------------------------------- ! Determine size of postResults array outputsLoop: do o = 1_pInt,plastic_kinehardening_Noutput(instance) select case(param(instance)%outputID(o)) case(crss_ID, & !< critical resolved stress crss_back_ID, & !< critical resolved back stress sense_ID, & !< sense of acting shear stress (-1 or +1) chi0_ID, & !< backstress at last switch of stress sense gamma0_ID, & !< accumulated shear at last switch of stress sense accshear_ID, & shearrate_ID, & resolvedstress_ID) mySize = nSlip case(sumGamma_ID) mySize = 1_pInt case default end select outputFound: if (mySize > 0_pInt) then plastic_kinehardening_sizePostResult(o,instance) = mySize plastic_kinehardening_sizePostResults(instance) = plastic_kinehardening_sizePostResults(instance) + mySize endif outputFound enddo outputsLoop !-------------------------------------------------------------------------------------------------- ! allocate state arrays sizeDotState = nSlip & !< crss + nSlip & !< crss_back + nSlip & !< accumulated (absolute) shear + 1_pInt !< sum(gamma) sizeDeltaState = nSlip & !< sense of acting shear stress (-1 or +1) + nSlip & !< backstress at last switch of stress sense + nSlip !< accumulated shear at last switch of stress sense sizeState = sizeDotState + sizeDeltaState plasticState(phase)%sizeState = sizeState plasticState(phase)%sizeDotState = sizeDotState plasticState(phase)%sizeDeltaState = sizeDeltaState plasticState(phase)%offsetDeltaState = sizeDotState plasticState(phase)%sizePostResults = plastic_kinehardening_sizePostResults(instance) plasticState(phase)%nSlip = nSlip allocate(plasticState(phase)%state0 ( sizeState,NipcMyPhase), source=0.0_pReal) allocate(plasticState(phase)%partionedState0 ( sizeState,NipcMyPhase), source=0.0_pReal) allocate(plasticState(phase)%subState0 ( sizeState,NipcMyPhase), source=0.0_pReal) allocate(plasticState(phase)%state ( sizeState,NipcMyPhase), source=0.0_pReal) allocate(plasticState(phase)%aTolState (sizeDotState), source=0.0_pReal) allocate(plasticState(phase)%dotState (sizeDotState,NipcMyPhase), source=0.0_pReal) allocate(plasticState(phase)%deltaState (sizeDeltaState,NipcMyPhase), source=0.0_pReal) ! allocate space for deltaState if (any(numerics_integrator == 1_pInt)) then allocate(plasticState(phase)%previousDotState (sizeDotState,NipcMyPhase),source=0.0_pReal) allocate(plasticState(phase)%previousDotState2(sizeDotState,NipcMyPhase),source=0.0_pReal) endif if (any(numerics_integrator == 4_pInt)) & allocate(plasticState(phase)%RK4dotState (sizeDotState,NipcMyPhase), source=0.0_pReal) if (any(numerics_integrator == 5_pInt)) & allocate(plasticState(phase)%RKCK45dotState (6,sizeDotState,NipcMyPhase), source=0.0_pReal) offset_slip = plasticState(phase)%nSlip+plasticState(phase)%nTwin+2_pInt plasticState(phase)%slipRate => & plasticState(phase)%dotState(offset_slip+1:offset_slip+plasticState(phase)%nSlip,1:NipcMyPhase) plasticState(phase)%accumulatedSlip => & plasticState(phase)%state(offset_slip+1:offset_slip+plasticState(phase)%nSlip,1:NipcMyPhase) do f = 1_pInt,lattice_maxNslipFamily ! >>> interaction slip -- X index_myFamily = sum(plastic_kinehardening_Nslip(1:f-1_pInt,instance)) do j = 1_pInt,plastic_kinehardening_Nslip(f,instance) ! loop over (active) systems in my family (slip) do o = 1_pInt,lattice_maxNslipFamily index_otherFamily = sum(plastic_kinehardening_Nslip(1:o-1_pInt,instance)) do k = 1_pInt,plastic_kinehardening_Nslip(o,instance) ! loop over (active) systems in other family (slip) param(instance)%hardeningMatrix_SlipSlip(index_myFamily+j,index_otherFamily+k) = & param(instance)%interaction_SlipSlip(lattice_interactionSlipSlip( & sum(lattice_NslipSystem(1:f-1,phase))+j, & sum(lattice_NslipSystem(1:o-1,phase))+k, & phase)) enddo; enddo enddo; enddo !---------------------------------------------------------------------------------------------- !locally define dotState alias endindex = 0_pInt o = endIndex ! offset of dotstate index relative to state index startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%crss => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%crss => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) dotState(instance)%crss => plasticState(phase)%dotState (startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%crss = spread(math_expand(param(instance)%crss0,& plastic_kinehardening_Nslip(:,instance)), & 2, NipcMyPhase) plasticState(phase)%aTolState(startIndex-o:endIndex-o) = param(instance)%aTolResistance ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%crss_back => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%crss_back => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) dotState(instance)%crss_back => plasticState(phase)%dotState (startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%crss_back = 0.0_pReal plasticState(phase)%aTolState(startIndex-o:endIndex-o) = param(instance)%aTolResistance ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%accshear => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%accshear => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) dotState(instance)%accshear => plasticState(phase)%dotState (startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%accshear = 0.0_pReal plasticState(phase)%aTolState(startIndex-o:endIndex-o) = param(instance)%aTolShear ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + 1_pInt state (instance)%sumGamma => plasticState(phase)%state (startIndex ,1:NipcMyPhase) state0 (instance)%sumGamma => plasticState(phase)%state0 (startIndex ,1:NipcMyPhase) dotState(instance)%sumGamma => plasticState(phase)%dotState (startIndex-o ,1:NipcMyPhase) state0(instance)%sumGamma = 0.0_pReal plasticState(phase)%aTolState(startIndex-o:endIndex-o) = param(instance)%aTolShear !---------------------------------------------------------------------------------------------- !locally define deltaState alias o = endIndex ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%sense => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%sense => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) deltaState(instance)%sense => plasticState(phase)%deltaState(startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%sense = 0.0_pReal ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%chi0 => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%chi0 => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) deltaState(instance)%chi0 => plasticState(phase)%deltaState(startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%chi0 = 0.0_pReal ! ............................................. startIndex = endIndex + 1_pInt endIndex = endIndex + nSlip state (instance)%gamma0 => plasticState(phase)%state (startIndex :endIndex ,1:NipcMyPhase) state0 (instance)%gamma0 => plasticState(phase)%state0 (startIndex :endIndex ,1:NipcMyPhase) deltaState(instance)%gamma0 => plasticState(phase)%deltaState(startIndex-o:endIndex-o,1:NipcMyPhase) state0(instance)%gamma0 = 0.0_pReal endif myPhase2 enddo initializeInstances end subroutine plastic_kinehardening_init !-------------------------------------------------------------------------------------------------- !> @brief calculation of shear rates (\dot \gamma) !-------------------------------------------------------------------------------------------------- subroutine plastic_kinehardening_shearRates(gdot_pos,gdot_neg,tau_pos,tau_neg, & Tstar_v,ph,instance,of) use lattice, only: & lattice_NslipSystem, & lattice_Sslip_v, & lattice_maxNslipFamily, & lattice_NnonSchmid implicit none real(pReal), dimension(6), intent(in) :: & Tstar_v !< 2nd Piola Kirchhoff stress tensor in Mandel notation integer(pInt), intent(in) :: & ph, & !< phase ID instance, & !< instance of that phase of !< index of phaseMember real(pReal), dimension(plastic_kinehardening_totalNslip(instance)), intent(out) :: & gdot_pos, & !< shear rates from positive line segments gdot_neg, & !< shear rates from negative line segments tau_pos, & !< shear stress on positive line segments tau_neg !< shear stress on negative line segments integer(pInt) :: & index_myFamily, & f,i,j,k j = 0_pInt slipFamilies: do f = 1_pInt,lattice_maxNslipFamily index_myFamily = sum(lattice_NslipSystem(1:f-1_pInt,ph)) ! at which index starts my family slipSystems: do i = 1_pInt,plastic_kinehardening_Nslip(f,instance) j = j + 1_pInt tau_pos(j) = dot_product(Tstar_v,lattice_Sslip_v(1:6,1,index_myFamily+i,ph)) tau_neg(j) = tau_pos(j) nonSchmidSystems: do k = 1,lattice_NnonSchmid(ph) tau_pos(j) = tau_pos(j) + param(instance)%nonSchmidCoeff(k)* & dot_product(Tstar_v,lattice_Sslip_v(1:6,2*k+0,index_myFamily+i,ph)) tau_neg(j) = tau_neg(j) + param(instance)%nonSchmidCoeff(k)* & dot_product(Tstar_v,lattice_Sslip_v(1:6,2*k+1,index_myFamily+i,ph)) enddo nonSchmidSystems enddo slipSystems enddo slipFamilies gdot_pos = 0.5_pReal * param(instance)%gdot0 * & (abs(tau_pos-state(instance)%crss_back(:,of))/state(instance)%crss(:,of))**param(instance)%n_slip & *sign(1.0_pReal,tau_pos) gdot_neg = 0.5_pReal * param(instance)%gdot0 * & (abs(tau_neg-state(instance)%crss_back(:,of))/state(instance)%crss(:,of))**param(instance)%n_slip & *sign(1.0_pReal,tau_neg) end subroutine plastic_kinehardening_shearRates !-------------------------------------------------------------------------------------------------- !> @brief calculates plastic velocity gradient and its tangent !-------------------------------------------------------------------------------------------------- subroutine plastic_kinehardening_LpAndItsTangent(Lp,dLp_dTstar99, & Tstar_v,ipc,ip,el) use prec, only: & dNeq0 use math, only: & math_Plain3333to99, & math_Mandel6to33 use lattice, only: & lattice_Sslip, & !< schmid matrix lattice_Sslip_v, & lattice_maxNslipFamily, & lattice_NslipSystem, & lattice_NnonSchmid use material, only: & phaseAt, phasememberAt, & phase_plasticityInstance implicit none real(pReal), dimension(3,3), intent(out) :: & Lp !< plastic velocity gradient real(pReal), dimension(9,9), intent(out) :: & dLp_dTstar99 !< derivative of Lp with respect to 2nd Piola Kirchhoff stress integer(pInt), intent(in) :: & ipc, & !< component-ID of integration point ip, & !< integration point el !< element real(pReal), dimension(6), intent(in) :: & Tstar_v !< 2nd Piola Kirchhoff stress tensor in Mandel notation integer(pInt) :: & instance, & index_myFamily, & f,i,j,k,l,m,n, & of, & ph real(pReal), dimension(plastic_kinehardening_totalNslip(phase_plasticityInstance(phaseAt(ipc,ip,el)))) :: & gdot_pos,gdot_neg, & tau_pos,tau_neg real(pReal) :: & dgdot_dtau_pos,dgdot_dtau_neg real(pReal), dimension(3,3,3,3) :: & dLp_dTstar3333 !< derivative of Lp with respect to Tstar as 4th order tensor real(pReal), dimension(3,3,2) :: & nonSchmid_tensor ph = phaseAt(ipc,ip,el) !< figures phase for each material point of = phasememberAt(ipc,ip,el) !< index of the positions of each constituent of material point, phasememberAt is a function in material that helps figure them out instance = phase_plasticityInstance(ph) Lp = 0.0_pReal dLp_dTstar3333 = 0.0_pReal dLp_dTstar99 = 0.0_pReal call plastic_kinehardening_shearRates(gdot_pos,gdot_neg,tau_pos,tau_neg, & Tstar_v,ph,instance,of) j = 0_pInt ! reading and marking the starting index for each slip family slipFamilies: do f = 1_pInt,lattice_maxNslipFamily index_myFamily = sum(lattice_NslipSystem(1:f-1_pInt,ph)) ! at which index starts my family slipSystems: do i = 1_pInt,plastic_kinehardening_Nslip(f,instance) j = j + 1_pInt ! build nonSchmid tensor nonSchmid_tensor(1:3,1:3,1) = lattice_Sslip(1:3,1:3,1,index_myFamily+i,ph) nonSchmid_tensor(1:3,1:3,2) = nonSchmid_tensor(1:3,1:3,1) do k = 1,lattice_NnonSchmid(ph) nonSchmid_tensor(1:3,1:3,1) = nonSchmid_tensor(1:3,1:3,1) + param(instance)%nonSchmidCoeff(k)*& lattice_Sslip(1:3,1:3,2*k,index_myFamily+i,ph) nonSchmid_tensor(1:3,1:3,2) = nonSchmid_tensor(1:3,1:3,2) + param(instance)%nonSchmidCoeff(k)*& lattice_Sslip(1:3,1:3,2*k+1,index_myFamily+i,ph) enddo Lp = Lp + (gdot_pos(j)+gdot_neg(j))*lattice_Sslip(1:3,1:3,1,index_myFamily+i,ph) ! sum of all gdot*SchmidTensor gives Lp ! Calculation of the tangent of Lp ! sensitivity of Lp if (dNeq0(gdot_pos(j))) then dgdot_dtau_pos = gdot_pos(j)*param(instance)%n_slip/(tau_pos(j)-state(instance)%crss_back(j,of)) forall (k=1_pInt:3_pInt,l=1_pInt:3_pInt,m=1_pInt:3_pInt,n=1_pInt:3_pInt) & dLp_dTstar3333(k,l,m,n) = dLp_dTstar3333(k,l,m,n) + & dgdot_dtau_pos*lattice_Sslip(k,l,1,index_myFamily+i,ph)* & nonSchmid_tensor(m,n,1) endif if (dNeq0(gdot_neg(j))) then dgdot_dtau_neg = gdot_neg(j)*param(instance)%n_slip/(tau_neg(j)-state(instance)%crss_back(j,of)) forall (k=1_pInt:3_pInt,l=1_pInt:3_pInt,m=1_pInt:3_pInt,n=1_pInt:3_pInt) & dLp_dTstar3333(k,l,m,n) = dLp_dTstar3333(k,l,m,n) + & dgdot_dtau_neg*lattice_Sslip(k,l,1,index_myFamily+i,ph)* & nonSchmid_tensor(m,n,2) endif enddo slipSystems enddo slipFamilies end subroutine plastic_kinehardening_LpAndItsTangent !-------------------------------------------------------------------------------------------------- !> @brief calculates (instantaneous) incremental change of microstructure !-------------------------------------------------------------------------------------------------- subroutine plastic_kinehardening_deltaState(Tstar_v,ipc,ip,el) use prec, only: & dNeq use debug, only: & debug_level, & debug_constitutive, & debug_levelExtensive, & debug_levelSelective, & debug_e, & debug_i use material, only: & phaseAt, & phasememberAt, & phase_plasticityInstance implicit none real(pReal), dimension(6), intent(in):: & Tstar_v !< 2nd Piola Kirchhoff stress tensor in Mandel notation integer(pInt), intent(in) :: & ipc, & !< component-ID of integration point ip, & !< integration point el !< element real(pReal), dimension(6) :: & Tstar_dev_v !< deviatoric 2nd Piola Kirchhoff stress tensor in Mandel notation real(pReal), dimension(plastic_kinehardening_totalNslip(phase_plasticityInstance(phaseAt(ipc,ip,el)))) :: & gdot_pos,gdot_neg, & tau_pos,tau_neg, & sense integer(pInt) :: & ph, & instance, & !< instance of my instance (unique number of my constitutive model) of, & j !< shortcut notation for offset position in state array ph = phaseAt(ipc,ip,el) of = phasememberAt(ipc,ip,el) ! phasememberAt should be tackled by material and be renamed to material_phasemember instance = phase_plasticityInstance(ph) call plastic_kinehardening_shearRates(gdot_pos,gdot_neg,tau_pos,tau_neg, & Tstar_v,ph,instance,of) sense = sign(1.0_pReal,gdot_pos+gdot_neg) ! current sense of shear direction #ifdef DEBUG if (iand(debug_level(debug_constitutive), debug_levelExtensive) /= 0_pInt & .and. ((el == debug_e .and. ip == debug_i) & .or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) then write(6,'(a)') '======= kinehardening delta state =======' endif #endif !-------------------------------------------------------------------------------------------------- ! switch in sense of shear? do j = 1,plastic_kinehardening_totalNslip(instance) #ifdef DEBUG if (iand(debug_level(debug_constitutive), debug_levelExtensive) /= 0_pInt & .and. ((el == debug_e .and. ip == debug_i) & .or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) then write(6,'(i2,1x,f7.4,1x,f7.4)') j,sense(j),state(instance)%sense(j,of) endif #endif if (dNeq(sense(j),state(instance)%sense(j,of),0.1_pReal)) then deltaState(instance)%sense (j,of) = sense(j) - state(instance)%sense(j,of) ! switch sense deltaState(instance)%chi0 (j,of) = abs(state(instance)%crss_back(j,of)) - state(instance)%chi0(j,of) ! remember current backstress magnitude deltaState(instance)%gamma0(j,of) = state(instance)%accshear(j,of) - state(instance)%gamma0(j,of) ! remember current accumulated shear #ifdef DEBUG if (iand(debug_level(debug_constitutive), debug_levelExtensive) /= 0_pInt & .and. ((el == debug_e .and. ip == debug_i) & .or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) then write(6,'(a)') 'change of sense!' write(6,*) deltaState(instance)%sense (j,of), & deltaState(instance)%chi0(j,of), & deltaState(instance)%gamma0(j,of) endif #endif endif enddo end subroutine plastic_kinehardening_deltaState !-------------------------------------------------------------------------------------------------- !> @brief calculates the rate of change of microstructure !-------------------------------------------------------------------------------------------------- subroutine plastic_kinehardening_dotState(Tstar_v,ipc,ip,el) use lattice, only: & lattice_Sslip_v, & lattice_maxNslipFamily, & lattice_NslipSystem, & lattice_NnonSchmid use material, only: & material_phase, & phaseAt, phasememberAt, & plasticState, & phase_plasticityInstance implicit none real(pReal), dimension(6), intent(in) :: & Tstar_v !< 2nd Piola Kirchhoff stress tensor in Mandel notation, vector form integer(pInt), intent(in) :: & ipc, & !< component-ID of integration point ip, & !< integration point el !< element !< microstructure state integer(pInt) :: & instance,ph, & f,i,j,k, & index_myFamily,index_otherFamily, & nSlip, & offset_accshear, & of real(pReal), dimension(plastic_kinehardening_totalNslip(phase_plasticityInstance(material_phase(ipc,ip,el)))) :: & gdot_pos,gdot_neg, & tau_pos,tau_neg of = phasememberAt(ipc,ip,el) ph = phaseAt(ipc,ip,el) instance = phase_plasticityInstance(ph) nSlip = plastic_kinehardening_totalNslip(instance) dotState(instance)%sumGamma(of) = 0.0_pReal call plastic_kinehardening_shearRates(gdot_pos,gdot_neg,tau_pos,tau_neg, & Tstar_v,ph,instance,of) j = 0_pInt slipFamilies: do f = 1_pInt,lattice_maxNslipFamily slipSystems: do i = 1_pInt,plastic_kinehardening_Nslip(f,instance) j = j+1_pInt dotState(instance)%crss(j,of) = & ! evolution of slip resistance j dot_product(param(instance)%hardeningMatrix_SlipSlip(j,1:nSlip),abs(gdot_pos+gdot_neg)) * & ( param(instance)%theta1(f) + & (param(instance)%theta0(f) - param(instance)%theta1(f) & + param(instance)%theta0(f)*param(instance)%theta1(f)*state(instance)%sumGamma(of)/param(instance)%tau1(f)) & *exp(-state(instance)%sumGamma(of)*param(instance)%theta0(f)/param(instance)%tau1(f)) & ! V term depending on the harding law ) dotState(instance)%crss_back(j,of) = & ! evolution of back stress resistance j dot_product(param(instance)%hardeningMatrix_SlipSlip(j,1:nSlip),abs(gdot_pos+gdot_neg)) * & ( param(instance)%theta1_b(f) + & (param(instance)%theta0_b(f) - param(instance)%theta1_b(f) & + param(instance)%theta0_b(f)*param(instance)%theta1_b(f)/(param(instance)%tau1_b(f)+state(instance)%chi0(j,of)) & *(state(instance)%accshear(j,of)-state(instance)%gamma0(j,of))) & *exp(-(state(instance)%accshear(j,of)-state(instance)%gamma0(j,of)) & *param(instance)%theta0_b(f)/(param(instance)%tau1_b(f)+state(instance)%chi0(j,of))) & ) ! V term depending on the harding law for back stress dotState(instance)%accshear(j,of) = abs(gdot_pos(j)+gdot_neg(j)) dotState(instance)%sumGamma(of) = dotState(instance)%sumGamma(of) + dotState(instance)%accshear(j,of) enddo slipSystems enddo slipFamilies end subroutine plastic_kinehardening_dotState !-------------------------------------------------------------------------------------------------- !> @brief return array of constitutive results !-------------------------------------------------------------------------------------------------- function plastic_kinehardening_postResults(Tstar_v,ipc,ip,el) use material, only: & material_phase, & plasticState, & phaseAt, phasememberAt, & phase_plasticityInstance use lattice, only: & lattice_Sslip_v, & lattice_maxNslipFamily, & lattice_NslipSystem, & lattice_NnonSchmid implicit none real(pReal), dimension(6), intent(in) :: & Tstar_v !< 2nd Piola Kirchhoff stress tensor in Mandel notation integer(pInt), intent(in) :: & ipc, & !< component-ID of integration point ip, & !< integration point el !< element !< microstructure state real(pReal), dimension(plastic_kinehardening_sizePostResults(phase_plasticityInstance(material_phase(ipc,ip,el)))) :: & plastic_kinehardening_postResults integer(pInt) :: & instance,ph, of, & nSlip,& o,f,i,c,j,k, & index_myFamily real(pReal), dimension(plastic_kinehardening_totalNslip(phase_plasticityInstance(material_phase(ipc,ip,el)))) :: & gdot_pos,gdot_neg, & tau_pos,tau_neg of = phasememberAt(ipc,ip,el) ph = phaseAt(ipc,ip,el) instance = phase_plasticityInstance(ph) nSlip = plastic_kinehardening_totalNslip(instance) plastic_kinehardening_postResults = 0.0_pReal c = 0_pInt call plastic_kinehardening_shearRates(gdot_pos,gdot_neg,tau_pos,tau_neg, & Tstar_v,ph,instance,of) outputsLoop: do o = 1_pInt,plastic_kinehardening_Noutput(instance) select case(param(instance)%outputID(o)) case (crss_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%crss(:,of) c = c + nSlip case(crss_back_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%crss_back(:,of) c = c + nSlip case (sense_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%sense(:,of) c = c + nSlip case (chi0_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%chi0(:,of) c = c + nSlip case (gamma0_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%gamma0(:,of) c = c + nSlip case (accshear_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = state(instance)%accshear(:,of) c = c + nSlip case (sumGamma_ID) plastic_kinehardening_postResults(c+1_pInt) = state(instance)%sumGamma(of) c = c + 1_pInt case (shearrate_ID) plastic_kinehardening_postResults(c+1_pInt:c+nSlip) = gdot_pos+gdot_neg c = c + nSlip case (resolvedstress_ID) j = 0_pInt slipFamilies: do f = 1_pInt,lattice_maxNslipFamily index_myFamily = sum(lattice_NslipSystem(1:f-1_pInt,ph)) ! at which index starts my family slipSystems: do i = 1_pInt,plastic_kinehardening_Nslip(f,instance) j = j + 1_pInt plastic_kinehardening_postResults(c+j) = & dot_product(Tstar_v,lattice_Sslip_v(1:6,1,index_myFamily+i,ph)) enddo slipSystems enddo slipFamilies c = c + nSlip end select enddo outputsLoop end function plastic_kinehardening_postResults end module plastic_kinehardening