!-------------------------------------------------------------------------------------------------- !> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH !> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH !> @author Martin Diehl, Max-Planck-Institut für Eisenforschung GmbH !> @brief material subroutine for isotropic plasticity !> @details Isotropic Plasticity which resembles the phenopowerlaw plasticity without !! resolving the stress on the slip systems. Will give the response of phenopowerlaw for an !! untextured polycrystal !-------------------------------------------------------------------------------------------------- module plastic_isotropic use prec use debug use math use IO use material use config use discretization use results implicit none private enum, bind(c) enumerator :: & undefined_ID, & xi_ID, & dot_gamma_ID end enum type :: tParameters real(pReal) :: & M, & !< Taylor factor xi_0, & !< initial critical stress dot_gamma_0, & !< reference strain rate n, & !< stress exponent h0, & h_ln, & xi_inf, & !< maximum critical stress a, & c_1, & c_4, & c_3, & c_2, & aTol_xi, & aTol_gamma integer :: & of_debug = 0 integer(kind(undefined_ID)), allocatable, dimension(:) :: & outputID logical :: & dilatation end type tParameters type :: tIsotropicState real(pReal), pointer, dimension(:) :: & xi, & gamma end type tIsotropicState !-------------------------------------------------------------------------------------------------- ! containers for parameters and state type(tParameters), allocatable, dimension(:) :: param type(tIsotropicState), allocatable, dimension(:) :: & dotState, & state public :: & plastic_isotropic_init, & plastic_isotropic_LpAndItsTangent, & plastic_isotropic_LiAndItsTangent, & plastic_isotropic_dotState, & plastic_isotropic_results contains !-------------------------------------------------------------------------------------------------- !> @brief module initialization !> @details reads in material parameters, allocates arrays, and does sanity checks !-------------------------------------------------------------------------------------------------- subroutine plastic_isotropic_init integer :: & Ninstance, & p, i, & NipcMyPhase, & sizeState, sizeDotState integer(kind(undefined_ID)) :: & outputID character(len=pStringLen) :: & extmsg = '' character(len=pStringLen), dimension(:), allocatable :: & outputs write(6,'(/,a)') ' <<<+- plastic_'//PLASTICITY_ISOTROPIC_label//' init -+>>>' write(6,'(/,a)') ' Maiti and Eisenlohr, Scripta Materialia 145:37–40, 2018' write(6,'(a)') ' https://doi.org/10.1016/j.scriptamat.2017.09.047' Ninstance = count(phase_plasticity == PLASTICITY_ISOTROPIC_ID) if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0) & write(6,'(a16,1x,i5,/)') '# instances:',Ninstance allocate(param(Ninstance)) allocate(state(Ninstance)) allocate(dotState(Ninstance)) do p = 1, size(phase_plasticity) if (phase_plasticity(p) /= PLASTICITY_ISOTROPIC_ID) cycle associate(prm => param(phase_plasticityInstance(p)), & dot => dotState(phase_plasticityInstance(p)), & stt => state(phase_plasticityInstance(p)), & config => config_phase(p)) #ifdef DEBUG if (p==material_phaseAt(debug_g,debug_e)) & prm%of_debug = material_phasememberAt(debug_g,debug_i,debug_e) #endif prm%xi_0 = config%getFloat('tau0') prm%xi_inf = config%getFloat('tausat') prm%dot_gamma_0 = config%getFloat('gdot0') prm%n = config%getFloat('n') prm%h0 = config%getFloat('h0') prm%M = config%getFloat('m') prm%h_ln = config%getFloat('h0_slopelnrate', defaultVal=0.0_pReal) prm%c_1 = config%getFloat('tausat_sinhfita',defaultVal=0.0_pReal) prm%c_4 = config%getFloat('tausat_sinhfitb',defaultVal=0.0_pReal) prm%c_3 = config%getFloat('tausat_sinhfitc',defaultVal=0.0_pReal) prm%c_2 = config%getFloat('tausat_sinhfitd',defaultVal=0.0_pReal) prm%a = config%getFloat('a') prm%aTol_xi = config%getFloat('atol_flowstress',defaultVal=1.0_pReal) prm%aTol_gamma = config%getFloat('atol_shear', defaultVal=1.0e-6_pReal) prm%dilatation = config%keyExists('/dilatation/') !-------------------------------------------------------------------------------------------------- ! sanity checks extmsg = '' if (prm%aTol_gamma <= 0.0_pReal) extmsg = trim(extmsg)//' aTol_gamma' if (prm%xi_0 < 0.0_pReal) extmsg = trim(extmsg)//' xi_0' if (prm%dot_gamma_0 <= 0.0_pReal) extmsg = trim(extmsg)//' dot_gamma_0' if (prm%n <= 0.0_pReal) extmsg = trim(extmsg)//' n' if (prm%a <= 0.0_pReal) extmsg = trim(extmsg)//' a' if (prm%M <= 0.0_pReal) extmsg = trim(extmsg)//' m' if (prm%aTol_xi <= 0.0_pReal) extmsg = trim(extmsg)//' atol_xi' if (prm%aTol_gamma <= 0.0_pReal) extmsg = trim(extmsg)//' atol_shear' !-------------------------------------------------------------------------------------------------- ! exit if any parameter is out of range if (extmsg /= '') & call IO_error(211,ext_msg=trim(extmsg)//'('//PLASTICITY_ISOTROPIC_label//')') !-------------------------------------------------------------------------------------------------- ! output pararameters outputs = config%getStrings('(output)',defaultVal=emptyStringArray) allocate(prm%outputID(0)) do i=1, size(outputs) outputID = undefined_ID select case(outputs(i)) case ('flowstress') outputID = xi_ID case ('strainrate') outputID = dot_gamma_ID end select if (outputID /= undefined_ID) then prm%outputID = [prm%outputID, outputID] endif enddo !-------------------------------------------------------------------------------------------------- ! allocate state arrays NipcMyPhase = count(material_phaseAt == p) * discretization_nIP sizeDotState = size(['xi ','accumulated_shear']) sizeState = sizeDotState call material_allocatePlasticState(p,NipcMyPhase,sizeState,sizeDotState,0) !-------------------------------------------------------------------------------------------------- ! locally defined state aliases and initialization of state0 and aTolState stt%xi => plasticState(p)%state (1,:) stt%xi = prm%xi_0 dot%xi => plasticState(p)%dotState(1,:) plasticState(p)%aTolState(1) = prm%aTol_xi stt%gamma => plasticState(p)%state (2,:) dot%gamma => plasticState(p)%dotState(2,:) plasticState(p)%aTolState(2) = prm%aTol_gamma ! global alias plasticState(p)%slipRate => plasticState(p)%dotState(2:2,:) plasticState(p)%accumulatedSlip => plasticState(p)%state (2:2,:) plasticState(p)%state0 = plasticState(p)%state ! ToDo: this could be done centrally end associate enddo end subroutine plastic_isotropic_init !-------------------------------------------------------------------------------------------------- !> @brief calculates plastic velocity gradient and its tangent !-------------------------------------------------------------------------------------------------- subroutine plastic_isotropic_LpAndItsTangent(Lp,dLp_dMp,Mp,instance,of) real(pReal), dimension(3,3), intent(out) :: & Lp !< plastic velocity gradient real(pReal), dimension(3,3,3,3), intent(out) :: & dLp_dMp !< derivative of Lp with respect to the Mandel stress real(pReal), dimension(3,3), intent(in) :: & Mp !< Mandel stress integer, intent(in) :: & instance, & of real(pReal), dimension(3,3) :: & Mp_dev !< deviatoric part of the Mandel stress real(pReal) :: & dot_gamma, & !< strainrate norm_Mp_dev, & !< norm of the deviatoric part of the Mandel stress squarenorm_Mp_dev !< square of the norm of the deviatoric part of the Mandel stress integer :: & k, l, m, n associate(prm => param(instance), stt => state(instance)) Mp_dev = math_deviatoric33(Mp) squarenorm_Mp_dev = math_mul33xx33(Mp_dev,Mp_dev) norm_Mp_dev = sqrt(squarenorm_Mp_dev) if (norm_Mp_dev > 0.0_pReal) then dot_gamma = prm%dot_gamma_0 * (sqrt(1.5_pReal) * norm_Mp_dev/(prm%M*stt%xi(of))) **prm%n Lp = dot_gamma/prm%M * Mp_dev/norm_Mp_dev #ifdef DEBUG if (iand(debug_level(debug_constitutive), debug_levelExtensive) /= 0 & .and. (of == prm%of_debug .or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0)) then write(6,'(/,a,/,3(12x,3(f12.4,1x)/))') '<< CONST isotropic >> Tstar (dev) / MPa', & transpose(Mp_dev)*1.0e-6_pReal write(6,'(/,a,/,f12.5)') '<< CONST isotropic >> norm Tstar / MPa', norm_Mp_dev*1.0e-6_pReal write(6,'(/,a,/,f12.5)') '<< CONST isotropic >> gdot', dot_gamma end if #endif forall (k=1:3,l=1:3,m=1:3,n=1:3) & dLp_dMp(k,l,m,n) = (prm%n-1.0_pReal) * Mp_dev(k,l)*Mp_dev(m,n) / squarenorm_Mp_dev forall (k=1:3,l=1:3) & dLp_dMp(k,l,k,l) = dLp_dMp(k,l,k,l) + 1.0_pReal forall (k=1:3,m=1:3) & dLp_dMp(k,k,m,m) = dLp_dMp(k,k,m,m) - 1.0_pReal/3.0_pReal dLp_dMp = dot_gamma / prm%M * dLp_dMp / norm_Mp_dev else Lp = 0.0_pReal dLp_dMp = 0.0_pReal end if end associate end subroutine plastic_isotropic_LpAndItsTangent !-------------------------------------------------------------------------------------------------- !> @brief calculates plastic velocity gradient and its tangent !-------------------------------------------------------------------------------------------------- subroutine plastic_isotropic_LiAndItsTangent(Li,dLi_dMi,Mi,instance,of) real(pReal), dimension(3,3), intent(out) :: & Li !< inleastic velocity gradient real(pReal), dimension(3,3,3,3), intent(out) :: & dLi_dMi !< derivative of Li with respect to Mandel stress real(pReal), dimension(3,3), intent(in) :: & Mi !< Mandel stress integer, intent(in) :: & instance, & of real(pReal) :: & tr !< trace of spherical part of Mandel stress (= 3 x pressure) integer :: & k, l, m, n associate(prm => param(instance), stt => state(instance)) tr=math_trace33(math_spherical33(Mi)) if (prm%dilatation .and. abs(tr) > 0.0_pReal) then ! no stress or J2 plasticity --> Li and its derivative are zero Li = math_I3 & * prm%dot_gamma_0/prm%M * (3.0_pReal*prm%M*stt%xi(of))**(-prm%n) & * tr * abs(tr)**(prm%n-1.0_pReal) #ifdef DEBUG if (iand(debug_level(debug_constitutive), debug_levelExtensive) /= 0 & .and. (of == prm%of_debug .or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0)) then write(6,'(/,a,/,f12.5)') '<< CONST isotropic >> pressure / MPa', tr/3.0_pReal*1.0e-6_pReal write(6,'(/,a,/,f12.5)') '<< CONST isotropic >> gdot', prm%dot_gamma_0 * (3.0_pReal*prm%M*stt%xi(of))**(-prm%n) & * tr * abs(tr)**(prm%n-1.0_pReal) end if #endif forall (k=1:3,l=1:3,m=1:3,n=1:3) & dLi_dMi(k,l,m,n) = prm%n / tr * Li(k,l) * math_I3(m,n) else Li = 0.0_pReal dLi_dMi = 0.0_pReal endif end associate end subroutine plastic_isotropic_LiAndItsTangent !-------------------------------------------------------------------------------------------------- !> @brief calculates the rate of change of microstructure !-------------------------------------------------------------------------------------------------- subroutine plastic_isotropic_dotState(Mp,instance,of) real(pReal), dimension(3,3), intent(in) :: & Mp !< Mandel stress integer, intent(in) :: & instance, & of real(pReal) :: & dot_gamma, & !< strainrate xi_inf_star, & !< saturation xi norm_Mp !< norm of the (deviatoric) Mandel stress associate(prm => param(instance), stt => state(instance), dot => dotState(instance)) if (prm%dilatation) then norm_Mp = sqrt(math_mul33xx33(Mp,Mp)) else norm_Mp = sqrt(math_mul33xx33(math_deviatoric33(Mp),math_deviatoric33(Mp))) endif dot_gamma = prm%dot_gamma_0 * (sqrt(1.5_pReal) * norm_Mp /(prm%M*stt%xi(of))) **prm%n if (dot_gamma > 1e-12_pReal) then if (dEq0(prm%c_1)) then xi_inf_star = prm%xi_inf else xi_inf_star = prm%xi_inf & + asinh( (dot_gamma / prm%c_1)**(1.0_pReal / prm%c_2))**(1.0_pReal / prm%c_3) & / prm%c_4 * (dot_gamma / prm%dot_gamma_0)**(1.0_pReal / prm%n) endif dot%xi(of) = dot_gamma & * ( prm%h0 + prm%h_ln * log(dot_gamma) ) & * abs( 1.0_pReal - stt%xi(of)/xi_inf_star )**prm%a & * sign(1.0_pReal, 1.0_pReal - stt%xi(of)/xi_inf_star) else dot%xi(of) = 0.0_pReal endif dot%gamma(of) = dot_gamma ! ToDo: not really used end associate end subroutine plastic_isotropic_dotState !-------------------------------------------------------------------------------------------------- !> @brief writes results to HDF5 output file !-------------------------------------------------------------------------------------------------- subroutine plastic_isotropic_results(instance,group) integer, intent(in) :: instance character(len=*), intent(in) :: group integer :: o associate(prm => param(instance), stt => state(instance)) outputsLoop: do o = 1,size(prm%outputID) select case(prm%outputID(o)) case (xi_ID) call results_writeDataset(group,stt%xi,'xi','resistance against plastic flow','Pa') end select enddo outputsLoop end associate end subroutine plastic_isotropic_results end module plastic_isotropic