1fe202fd90
added $ID and line endings.
2012-09-13 07:56:45 +00:00
1585fbe927
improved material.config writer class
...
includes example of usage
should replace material.py, after the tests
have been confirmed to work with it
mat=damask.Material()
m=mat.example_1()
m.write(file='material.config_<descriptive-label>')
2012-09-07 18:25:25 +00:00
b9a2890665
fixed bug in loadcase rotation: when not specifying "deg" the rotation was reset to 0,0,0..!
2012-09-06 14:05:28 +00:00
4f6e0eda32
splitter geom-file un/packing into two separate scripts.
2012-09-05 15:15:11 +00:00
dc55e30cf1
added "startingIncrement" to spectralOut result interpretation
2012-09-05 15:14:36 +00:00
29023cea3c
minor correction of debugging output
2012-09-05 11:19:46 +00:00
330d71864e
fixed bug with stress BC handling
2012-09-05 08:30:15 +00:00
3ed60e3880
Added report of SUCCESSFUL test for Revision 1742
2012-09-05 03:15:32 +00:00
f153866030
introduced factor to control edge contribution to multiplication;
...
dislocation density below a single dislocation per IP considered not significant
2012-09-04 16:56:37 +00:00
0c5f9fedc7
Added report of SUCCESSFUL test for Revision 1740
2012-09-04 03:24:22 +00:00
c3375fe60b
Added report of SUCCESSFUL test for Revision 1739
2012-09-03 03:54:38 +00:00
8234e37060
Added report of SUCCESSFUL test for Revision 1738
2012-09-02 03:30:44 +00:00
1eca55a253
Added report of SUCCESSFUL test for Revision 1737
2012-09-01 03:36:58 +00:00
51043ec1af
Added report of SUCCESSFUL test for Revision 1736
2012-08-31 03:24:29 +00:00
22812c9a91
some minor improvement on precision detection: checking only once (in prec and no longer in math and crystallite), added one more 4/8 switch for LAPACK, as there is no single precision FFTW, stopping compilation for spectral method if FLOAT=4
...
new function in IO to print integers without leading zeros, implemented it at some places in the new spectral solver (reporting still needs some serious polishing)
updated preprocessing for documentation to handle precision correctly
2012-08-30 20:26:28 +00:00
b7dc9f9944
renamed spectral_buildElements.py to nodesFromCentroids.py and added first simple version of an ascii table to ang converter
2012-08-30 17:01:46 +00:00
299d9e6bc4
fixed bug in seed initialization that didn't allow to redo calculations that started with a random seed. Now the whole random seed array is set to one value, previously only the first one was reported and the remaining ones were random
...
removed old random function used by halton
2012-08-30 14:58:30 +00:00
d80b45c1d9
added relativistic correction of velocity (maximum velocity given by parameter in material.config); probability of thermal activation in velocity law not allowed to be greater than one.
...
output of creation rate for edge jogs now for own system, not collinear.
check for negative densities in dotState now uses absoluteToleranceRho instead of significantRho.
2012-08-30 07:33:13 +00:00
801c0380b6
Added report of SUCCESSFUL test for Revision 1731
2012-08-30 03:25:17 +00:00
19089019a7
improved test (now doing 30 runs with fixed seed) for abaqus and simplified the shell scripts again
2012-08-29 22:17:16 +00:00
8e3b547cbd
changed numerics.f90 back to the old openmp statement as this doesn't seem to cause the problem and is standard conforming
...
corrected typo in constitutive_j2.f90 that might cause abaqus to crash
now running 20 tests of abaqus in order to have a decent statistic about the crash behavior
improved abaqus_v6.env
2012-08-29 16:16:10 +00:00
84e3f94424
added flush for easier debugging
2012-08-29 15:23:43 +00:00
d83150be1b
now capturing "terminallyIll" for basic solution, should end in a automatic cutback of time steps for the spectral solver
2012-08-29 05:50:42 +00:00
3106b8ce0c
corrected definition of integer type for gfortran
2012-08-29 05:19:35 +00:00
d089c12947
abaqus seems to have similar problems with the openmp lib as marc (use module vs. include file), i hope this fixes the crashes
2012-08-28 19:48:38 +00:00
5e9e8497e6
new solver is now compiling without a PETSc installation, however only the plain basic solver is available then.
...
also removed reporting of PETSc related variables in the case it is not installed/found
2012-08-28 19:19:47 +00:00
0f64289d75
fixed bug causing trouble with ifort 11 (abaqus)
2012-08-28 19:10:54 +00:00
0959ff3299
substituted hand written matrix inversion by LAPACK version with precision selection.
...
also introduced check for inversion into DAMASK_spectral_Utilities.f90 for the stress BC calculation. This part is further improved by using 5% of the reference stiffness to avoid trouble in the fully plastic regime (where the stiffness is underestimated)
Test for Marc 2010 is updated because the new inversion give slightly different results near 0 (order of e-13)
2012-08-28 16:59:45 +00:00
73349d02f5
merged precision info into the file prec.f90 and removed prec_single.f90
...
precision information is now parsed as a makro, defined by the compiler, eg. -DFLOAT=8 for 8 byte long floats or -- in case no values is given -- for the FEM wrapper by the interface files.
Please don't forget to run setup_code.py !!!!!!!!!!!
abaqus_v6.env is adjusted to specify the standard precision (float=8, int=4) and got some extra compilation options, some deprecated warning supressors are removed
Optional Marc modification will follow that allow automatic selection of suitable precision
2012-08-28 16:08:17 +00:00
bb25d1fee6
Added report of SUCCESSFUL test for Revision 1720
2012-08-28 00:19:04 +00:00
03b9f81641
corrected path to intel fortran (changes with every release :( )
2012-08-27 20:20:03 +00:00
f3e7b3cec8
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:31 +00:00
aa380dcb08
added separate output of dipole formation rate for edge and screw
2012-08-27 15:57:22 +00:00
efd1b513cf
fixed bug in divergenceFDM
2012-08-27 15:43:17 +00:00
9214da4465
added missing labels to list of available outputs
2012-08-27 12:41:57 +00:00
6f93939296
added new abaqus test to automatic execution
2012-08-27 11:29:18 +00:00
8dc92e02bb
compile test for abaqus std working, input file for explicit has to be adjusted
2012-08-27 11:13:20 +00:00
3f99d2bb65
further improved prefix handling
2012-08-27 09:39:57 +00:00
96ba5ecae4
moved some more 'mesh related' functions for post processing from math.f90 to mesh.f90
...
f2py functions remaining in math.f90 now uses assumed size arrays in order to have simpler interfaces. This is only working with python 2.7!
changed python pre- and postprocessing scripts.
If you encounter any problems whith core modules, try to remove the old core.so in the lib/damask
2012-08-27 08:04:47 +00:00
55a5112f36
added comments for doxygen documentation
2012-08-25 11:46:36 +00:00
948ace0661
decreased tolerance for new load case parsing test
2012-08-25 07:35:15 +00:00
e335222bd0
added constitutive none to abaqus files
2012-08-24 19:21:39 +00:00
938fe00c9b
continued on making the abaqus compilation test running
2012-08-24 19:15:05 +00:00
310705551d
added new spectral test to automator and new test to prove correct geometry reconstruction. some other small improvements (new Folder name for results, executable for run_test.py etc.)
2012-08-24 17:05:20 +00:00
3924966f92
tightened tolerance
2012-08-24 16:35:33 +00:00
16aa033680
test for correct parsing of loadcase arguments (fdot, velgrad, incs, logincs) now working
2012-08-24 16:31:33 +00:00
405c3765bd
fixed bug in fiber texture component caused non-even distribution by correctly getting numbers of the halton sequence
2012-08-24 13:27:55 +00:00
3cd5fa90e8
corrected dislocation multiplication term for special case of zero density
2012-08-24 11:36:46 +00:00
c4df00d92d
Added report of SUCCESSFUL test for Revision 1701
2012-08-23 23:57:54 +00:00
4f67d04c69
new parameter "significantRho" for nonlocal constitutive law ; density below this value will hardly contribute to dislocation glide or any dislocation reaction ; old parameter "absoluteToleranceRho" is now used only for its initial purpose, namely the absolute tolerance in the state integration
2012-08-23 05:48:21 +00:00
Philip Eisenlohr