72d20875de
added some switches and variables to the makefile to make it more flexible
...
DAMASK_spectral.f90 is a "debug version" with a number of different criteria to determine divergence. will be removed later on.
2011-07-25 16:30:21 +00:00
a58158fc7c
bug fix related to hash key error when requesting --increments range
2011-07-25 12:53:54 +00:00
8cb8637d41
fixed running with default --range & using --separation options.
2011-07-22 11:59:03 +00:00
105a09f3df
only consider increments actually present in (spectral) result
...
added switch to change from range of positions to range of increments
polished help output
2011-07-21 15:45:41 +00:00
2e9c605571
somehow forgot to move the numerics.config into the config subdir...
2011-07-21 08:40:45 +00:00
e92e5cae53
restarting now works with Abaqus (standard, cannot test explicit due to lack of license)
...
you have to specify the job you are restarting from in the job description (cae), if you prepare your input file by hand this is the first line after *Heading
example: if the first job was using Oldjob.inp the first entry in the job description needs to be Oldjob (without the .inp)
as for Marc restart works only from last converged increment, i.e. ther restart writing should be specified like this:
*retsart, write, frequency=1, overlay
Overlay is not essential but saves a lot of disk space and as stated before you can only restart from the last converged increment anyway
2011-07-18 09:15:20 +00:00
8c65cb9ea6
small output polishing
2011-07-15 12:25:38 +00:00
cb96559d99
mappings should rather be called "sumabs" and "avgabs" than "abssum" and "absavg"
2011-07-15 11:27:47 +00:00
63451f6edf
added "absavg" (=average of the absolute values) to the predefined mappings
2011-07-15 08:07:33 +00:00
09ba92c26e
added and rearranged error messages, polished output and simplified calculation of f depending on fdot or L
...
guessing along former trajectory is now on per default, 'guessreset' and 'dropguessing' switch it off.
2011-07-14 09:37:31 +00:00
56340fd487
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase.
...
changed back to use the compliance of initial linear material behavior.
added counter of non-converged steps
renamed compiler flags in makefile
2011-07-13 16:33:12 +00:00
8153cd50b4
added spectral numeric parameters to numerics.config, changed values for spectral numeric parameters in numerics.f90 to more suitable values for new method for determination of divergence in Fourier space
2011-07-11 14:28:56 +00:00
a08eaecf4e
polishing (names of variables, spaces, comments etc.)
...
renamed mpie to DAMASK in IO.f90 error message
2011-07-07 15:27:35 +00:00
a561ef1cf5
corrected calculation of divergence in Fourier space, removed normalization of normdyad (was useless), now using correct compliance for calculation of stress BC.
2011-07-07 10:03:55 +00:00
18a5841bc5
keyword freq for frequency of output writing was not evaluated when reading loadcase file
2011-07-07 09:18:05 +00:00
e889b69bec
Ability to define loglinear time increments by using 'logincs' or 'logsteps' instead of 'incs' in loadcase file is added.
2011-07-06 13:10:18 +00:00
0add06bdfe
slight polishing of documentation for phenopowerlaw
2011-06-21 17:48:32 +00:00
b252b467e8
moved useful ASCII post processing scripts from my Code repository into the DAMASK post-proc.
2011-06-21 16:25:48 +00:00
daa45306f2
fixed a nasty bug in reading the header of spectral files
...
file type is guessed from extension
script tries to gracefully continue when data is missing but not crucial
ASCII file splitting now has correct increment (not position) in its name: poop_inc123.txt refers to true increment 123 not to position 123 in the result file anymore...
2011-06-21 12:38:58 +00:00
b6b02f6cf9
now reports over all loadcases present in the output file, not just a selected one...
2011-06-15 18:14:05 +00:00
dd11ef3072
added capability to deal with (Marc, spectral) output files that have less than every increment stored.
2011-06-15 17:49:59 +00:00
314adae1bb
spectral solver can now write result at reduced output frequencies: use 'f', 'freq', or 'frequency' keyword in loadcase definition.
...
example: ... time 1 incs 100 freq 10 will write output at times 0.0, 0.1, 0.2, ... , i.e., every ten increments only.
2011-06-15 17:48:14 +00:00
3985a98da7
changed default to "no clean". if clean-up required, use '--clean' option!
2011-06-15 16:40:34 +00:00
480021e788
added '--noclean' option
2011-06-14 14:56:10 +00:00
1877026d86
sorry, dangling "endif"...
2011-06-14 14:35:55 +00:00
cc925cadee
changed output/debug-level relation for two statements
2011-06-14 14:08:13 +00:00
bb9e55a46d
forget to delete the original filenames with to many characters
2011-06-14 09:21:02 +00:00
9a212aa5fb
filename might be too long.
2011-06-14 08:17:35 +00:00
4d2f6782e7
removed "error" msg about missing /msc directory. if not present, now silently ignored (together with any requests for Mentat interaction).
2011-06-09 12:52:54 +00:00
d52fb1666e
"step" header is modified to "inc" to be consistent with postResults outputs.
2011-06-09 12:39:08 +00:00
a72a97f0ba
added nodalScalar capability.
...
--ns 'elements' reports the nodal connectivity (list of elements touching a node)
--prefix allows to prefix the output filename
2011-06-08 16:54:46 +00:00
f2c41aac83
do not use pwd library as it is unix only
...
due to the above path to subroutine is no longer set in mentat
spectral output uses different "grain numbers" for x-margin, y-margin, and margin edge
2011-06-08 15:06:37 +00:00
5740e13485
added new predefined mapping "abssum", which returns the sum of all absolute values
2011-06-08 14:07:15 +00:00
2cbfb69235
user defined mapping didn't work because of misspelled variable in "mapIncremental"
2011-06-08 13:56:21 +00:00
a26d9c844b
max size of crystallite result is now based on actual use within the mesh, not just picking the largest chunk from the material.config file...
2011-06-08 09:16:48 +00:00
7aed307bfc
removed obsolet option --frame
...
renamed texture component frame to margin
2011-06-08 06:47:23 +00:00
8921f29dce
merged imaging, Mentat, and spectral versions of generating a patch of grains from a reconstructed boundary file into one script.
2011-06-07 19:15:34 +00:00
9370d9a049
added 'spectral_geomCheck' to symlink table
2011-06-06 15:29:14 +00:00
8041587a72
changed internal debug verbosity in accord with debug.config listing.
2011-06-06 15:27:35 +00:00
4a694fa7fd
changed wildcard letter from '#' to '*' now consistent with new IO comment parsing.
...
fixed memory bug with bc_maskvector.
some brushing up here and there...
2011-06-06 15:20:28 +00:00
ae4c8fa2d8
renaming of "mpieNumThreadsInt" to "DAMAKS_NumThreadsInt" was forgotten here
2011-06-06 08:51:07 +00:00
9f5c9142e5
generate ParaView mesh from spectral geometry (*.geom) description file to check for correct grain assignment
2011-06-01 08:44:14 +00:00
4a2078e965
produces two-column data of step | iteration at which convergence was reached (or aborted). Source file is the redirected STDOUT of DAMASK_spectral
2011-05-31 12:31:35 +00:00
9a64f3dd85
* comments are now recognized by IO even when they do not appear at the beginning of the line
...
* no need for the zero entries in the material.config anymore
2011-05-30 09:09:19 +00:00
bbf75f3fb5
cannot omit entries for second to fourth slip system family, though they are zero
2011-05-30 07:53:41 +00:00
ac3a2ee4e1
alll grain have the same phase now
...
corrected small bug when Image library is not available
2011-05-28 09:48:39 +00:00
08d39342e4
reworked restarting for compatibility with abaqus (not yet fully working)
...
added new orientation feature for direct simulation:
component type (random) asigns random orientation to an entire grain
2011-05-28 09:44:43 +00:00
2418dfe96d
changed MPIE_NUM_THREADS to DAMASK_NUM_THREADS
2011-05-28 09:42:25 +00:00
5e6de13962
removed useless grain selection option (--grain)
...
escaped MPIE\n.... in $ID$
fixed problem when writing output files into subdirectories
2011-05-26 09:44:10 +00:00
96a4d83b9b
fixed bug in user mapping function.
...
corrected examples and added incremental mapping explanation to usage hint.
2011-05-26 09:41:53 +00:00
Martin Diehl