3f7a389ff7
changed state parsing for local models (and for delta_state) such that only the needed part of the state array (for the given material point) is used
2014-03-13 06:43:49 +00:00
2b589c3d71
moved reading in of lattice type and elastic constants to lattice module
...
removed structure type for hex, fcc, bcc, now defining slip/twin systems for each phase found in material.config
constitutive modules will only be initialized if needed
homogenizedC function is only needed for models incorporating twinning in a physical way (titanmod and dislotwin)
2014-03-08 20:50:31 +00:00
92bf1565fc
formatting
2014-02-28 13:05:11 +00:00
650b71ffa9
renamed instance consistently to "instance" as a preparation for new structure / elastic matrix handling
2014-02-28 10:18:40 +00:00
d8311d46b3
.. last commit message was missing because I wanted to abort, so:
...
move reading in of lattice structure to lattice (elastic constants, c/a ratio, lattice structure). Still needs a little bit of documentation, the lattice structure names are not easy to understand.
tested it for j2 and phenopowerlaw and seems ok, but before continuation with the other constitutives models might simplifiy a little bit.
2014-02-10 14:38:05 +00:00
d45aea4467
moved reading in of lattice stru
2014-02-10 14:31:19 +00:00
e6d88e4458
prevent twin volume fraction from going above 1.0
2014-01-22 15:47:49 +00:00
9223cf52b4
corrected non-Schmid effect: used to calculate resolvedstress based on Mandel notation which can be incorrect for nonsymmetric non-Schmid tensors
2014-01-16 09:50:40 +00:00
b24dd62431
corrected tangent of plastic velocity gradient dLp_dT for slip (twin volume fraction was missing)
2014-01-16 09:29:21 +00:00
831e905b16
added missing lp output to crystallite
2013-12-20 11:13:12 +00:00
61c6839723
fixed over-sensitive error in homogeniztion and ifort option in makefile
2013-12-19 08:49:47 +00:00
65ae979920
indroduced sourced allocation, enums where applicable (some parts still missing). fixed bug when having recursive file input
2013-12-12 17:09:59 +00:00
95d6430b09
improved on enums (introduced them for output in j2), fixed wrong recursion depth bug in IO, fixed a bug in reading in for none, j2, phenopowerlaw
2013-12-11 22:03:09 +00:00
f56cdafccb
polishing indentation levels
2013-11-29 12:25:36 +00:00
2d624d022f
fixed small bug in detecting the lattice structure. only first 3 letters count (e.g. 'ort' and 'orthography' will give the orthorombic lattice type)
2013-11-28 08:56:02 +00:00
0bc99a9622
change latticeName to latticeID
2013-11-27 16:20:27 +00:00
6c2ab1f1f8
added ID (integer, enum) case switching for phenopowerlaw and isostrain
2013-11-27 11:39:28 +00:00
2f7efa2055
introduced named constants for homogenization_type, phase_plasticitiy, and phase_elasticity to replace expensive string comparison. Labels for different schemes need to be stored in material.f90 because they are needed when parsing the config file
2013-11-27 08:04:05 +00:00
dc95c82d4a
removed temperature integration and corresponding data structures and debugging options
...
temperature is stored in crystallite, but homogeneous on one IP (not an component (grain) quantity and an input value parsed in by the BVP solver.
introduced heat, a component (grain) quantity which is homogenized before returned to the heat transfer solver.
went ahead with removal of dummy functions in homogenization and constitutive, this time mainly reduced function signatures to reflect actually needed quantities.
2013-10-16 13:04:59 +00:00
295d0cd28e
removed a bunch of dummy functions (delta state for all constitutive_XXX except nonlocal, microstructure for none, j2 and phenopowerla), additional simplifications for none, averageBurgers is only relevant for RGC
2013-10-14 10:54:45 +00:00
3b5a5ab812
changed error in case of number of found interaction types is less than expected to warning
2013-10-11 09:17:03 +00:00
ed47d25adc
remove dotTemperature (returned always 0 anyway) to make it easier to replace it with a heating rate funtction
...
remove potentially dangerous short circuiting in homogenization files
added doxygen comment for nonlocal (giving the functions a name)
fixed wrong definition of maxnchungs introcuded into dislotwin with last commit, causes trouble with hex
2013-10-09 06:12:16 +00:00
82faf74363
added doxygen documentation and unified variable names and some common parts of the code
2013-10-08 16:27:26 +00:00
3eec0ecdcd
introduced #EOF# as module wide parameter in IO.f90
...
renamed read/write binary file to read/write real/int
removed suffix job from readFile functions as the name of the model is needed as an argument
2013-09-18 14:07:55 +00:00
a8eb6a985e
- Addition of an example of a material.config file for hcp material (cp-Ti).
...
- New Error Message #214 when elastic constants are not correctly defined.
- Error message when the c/a ratio for hcp is higher than 2 (no physical sense).
2013-09-17 12:20:50 +00:00
5f973a21c0
require all hardening coefficients/ non schmid coefficients to be specified in material.config, do not silently ignore any
...
warning message now more meaningful (?) when using less than maximum number of slip families
2013-09-12 14:47:09 +00:00
813ed130b0
nonSchmid behavior now ready to use for bcc with phenopowerlaw and nonlocal constitutive model.
...
nonSchmid tensors according to Koester,Ma,Hartmaier,2012.
extended lattice_Sslip with non-Schmid tensors (the full non-symmetric tensors are required for the tangent and cannot be retrieved from the symmetrized Mandel notation)
2013-08-05 09:23:21 +00:00
8210b14e90
comments for doxygen
2013-07-12 06:57:15 +00:00
40ace5c666
more documentation and parameters capitalization unified and using ipc in all modules (sometimes called gr)
...
nonlocal: only missing line continuation in string fixed
2013-07-01 06:10:42 +00:00
fd8d85896a
error msg in case of unknown keyword was not properly trimmed --> 64kB of spaces...
2013-06-27 16:41:00 +00:00
98528f9a89
added possibility for multi-level inclusion of files in *.config and loadcase files.
...
include subfiles by stating
{path/to/include}
2013-06-26 19:19:00 +00:00
296a5040b9
fixed bug in initialization when reading in material.config.
...
Fortran does not short-circuit, e.g. (if a>0 .and. b(a) ==c) might cause an out-of-bounds error when a=-1 it'll try to access b(-1)!
2013-06-11 20:16:40 +00:00
a21dd816c7
init reporting of constitutive_*.f90 had less/to much spaces, renamed label to LABEL because it is a parameter.
...
removed debug output of geom_fromEuclideanDistance.py
2013-05-28 17:31:55 +00:00
02f092492e
updated copyright header
2013-03-22 17:35:05 +00:00
07ff1f7c93
reporting current time for most module inits
2013-02-25 16:34:59 +00:00
c1cf446774
parsing of material.config file now expects adequate number of (slip/twin) family entries according to given lattice type.
...
used to read up to maxN, but that caused unnecessary IO_warnings...
2013-02-14 22:24:55 +00:00
59a265ec7f
forgot intent(in) statements needed for pure routines
2013-02-11 10:56:10 +00:00
f0b4281400
removed unused variables, added pure statements, and declared external functions as external (using gfortrans debug option)
2013-02-11 10:43:45 +00:00
e644c6dbc5
improved reading in of values, now only warnings in case of problematic entries in material.config
...
divergence calculation sqrt scaling optionally introduced for basic scheme spectral solver
2013-02-08 15:55:53 +00:00
32a416e298
fixed memory leak associated to accumulated shear storage.
2013-02-08 13:33:25 +00:00
722d5574fb
added output capabilities for accumulated shears on slip and twin systems.
2013-02-06 18:09:11 +00:00
362cbf3359
Made corresponding changes in the constitutive files and DAMASK_spectral_driver and interface files with respect to the changes made to IO.f90
2013-02-06 16:45:34 +00:00
6cd6172c0c
fixed bug in dotState causing strange hardening for certain parameters
2013-02-01 15:44:50 +00:00
50e874f887
fixed bug in elasticity matrix calculation
2013-01-22 15:48:47 +00:00
652a8366fe
splitted lines > 132, added pure statements where suggested by gfortran 4.7
2013-01-22 13:02:23 +00:00
60fec0e8ec
added code structure for non-schmid mechanics. work in progress…
2013-01-21 23:11:16 +00:00
fd94c786f0
moved stiffness tensor calculation to lattice
...
introduced 'isotropic' and 'orthorhombic' lattice types to use corresponding symmetries in stiffness tensor. intended to be used with non-crystal plasticity models (j2, constitutive_none with isotropic, cubic or orthotropic elasticity).
2013-01-21 21:57:26 +00:00
00246ade4e
missing range in array fixed
2013-01-09 14:43:27 +00:00
093cf92338
remove omp statements during initialization, "line" for reading in from material.config now has a default (empty) value to prevent conditional jump depend on this value
2013-01-08 22:11:59 +00:00
19d86ca06a
removed unnecsessary omp statements, removed one transpose in constitutitve
2013-01-08 11:09:20 +00:00
Martin Diehl